| Age | Commit message (Collapse) | Author |
|---|
|
This patch is a mitigation to prevent the A-MSDU spoofing vulnerability
for mesh networks. The initial update to the IEEE 802.11 standard, in
response to the FragAttacks, missed this case (CVE-2025-27558). It can
be considered a variant of CVE-2020-24588 but for mesh networks.
This patch tries to detect if a standard MSDU was turned into an A-MSDU
by an adversary. This is done by parsing a received A-MSDU as a standard
MSDU, calculating the length of the Mesh Control header, and seeing if
the 6 bytes after this header equal the start of an rfc1042 header. If
equal, this is a strong indication of an ongoing attack attempt.
This defense was tested with mac80211_hwsim against a mesh network that
uses an empty Mesh Address Extension field, i.e., when four addresses
are used, and when using a 12-byte Mesh Address Extension field, i.e.,
when six addresses are used. Functionality of normal MSDUs and A-MSDUs
was also tested, and confirmed working, when using both an empty and
12-byte Mesh Address Extension field.
It was also tested with mac80211_hwsim that A-MSDU attacks in non-mesh
networks keep being detected and prevented.
Note that the vulnerability being patched, and the defense being
implemented, was also discussed in the following paper and in the
following IEEE 802.11 presentation:
https://papers.mathyvanhoef.com/wisec2025.pdf
https://mentor.ieee.org/802.11/dcn/25/11-25-0949-00-000m-a-msdu-mesh-spoof-protection.docx
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://patch.msgid.link/20250616004635.224344-1-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function is used as remove callback for a platform driver.
It was missed during the conversion from int to void
Fixes: 0edb555a65d1 ("platform: Make platform_driver::remove() return void")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20250706092053.97724-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
VHT operating mode notifications are not defined for channel widths
below 20 MHz. In particular, 5 MHz and 10 MHz are not valid under the
VHT specification and must be rejected.
Without this check, malformed notifications using these widths may
reach ieee80211_chan_width_to_rx_bw(), leading to a WARN_ON due to
invalid input. This issue was reported by syzbot.
Reject these unsupported widths early in sta_link_apply_parameters()
when opmode_notif is used. The accepted set includes 20, 40, 80, 160,
and 80+80 MHz, which are valid for VHT. While 320 MHz is not defined
for VHT, it is allowed to avoid rejecting HE or EHT clients that may
still send a VHT opmode notification.
Reported-by: syzbot+ededba317ddeca8b3f08@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ededba317ddeca8b3f08
Fixes: 751e7489c1d7 ("wifi: mac80211: expose ieee80211_chan_width_to_rx_bw() to drivers")
Tested-by: syzbot+ededba317ddeca8b3f08@syzkaller.appspotmail.com
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Link: https://patch.msgid.link/20250703193756.46622-2-moonhee.lee.ca@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When operating in concurrent STA/AP mode with host MLME enabled,
the firmware incorrectly sends disassociation frames to the STA
interface when clients disconnect from the AP interface.
This causes kernel warnings as the STA interface processes
disconnect events that don't apply to it:
[ 1303.240540] WARNING: CPU: 0 PID: 513 at net/wireless/mlme.c:141 cfg80211_process_disassoc+0x78/0xec [cfg80211]
[ 1303.250861] Modules linked in: 8021q garp stp mrp llc rfcomm bnep btnxpuart nls_iso8859_1 nls_cp437 onboard_us
[ 1303.327651] CPU: 0 UID: 0 PID: 513 Comm: kworker/u9:2 Not tainted 6.16.0-rc1+ #3 PREEMPT
[ 1303.335937] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT)
[ 1303.343588] Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex]
[ 1303.350856] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1303.357904] pc : cfg80211_process_disassoc+0x78/0xec [cfg80211]
[ 1303.364065] lr : cfg80211_process_disassoc+0x70/0xec [cfg80211]
[ 1303.370221] sp : ffff800083053be0
[ 1303.373590] x29: ffff800083053be0 x28: 0000000000000000 x27: 0000000000000000
[ 1303.380855] x26: 0000000000000000 x25: 00000000ffffffff x24: ffff000002c5b8ae
[ 1303.388120] x23: ffff000002c5b884 x22: 0000000000000001 x21: 0000000000000008
[ 1303.395382] x20: ffff000002c5b8ae x19: ffff0000064dd408 x18: 0000000000000006
[ 1303.402646] x17: 3a36333a61623a30 x16: 32206d6f72662063 x15: ffff800080bfe048
[ 1303.409910] x14: ffff000003625300 x13: 0000000000000001 x12: 0000000000000000
[ 1303.417173] x11: 0000000000000002 x10: ffff000003958600 x9 : ffff000003625300
[ 1303.424434] x8 : ffff00003fd9ef40 x7 : ffff0000039fc280 x6 : 0000000000000002
[ 1303.431695] x5 : ffff0000038976d4 x4 : 0000000000000000 x3 : 0000000000003186
[ 1303.438956] x2 : 000000004836ba20 x1 : 0000000000006986 x0 : 00000000d00479de
[ 1303.446221] Call trace:
[ 1303.448722] cfg80211_process_disassoc+0x78/0xec [cfg80211] (P)
[ 1303.454894] cfg80211_rx_mlme_mgmt+0x64/0xf8 [cfg80211]
[ 1303.460362] mwifiex_process_mgmt_packet+0x1ec/0x460 [mwifiex]
[ 1303.466380] mwifiex_process_sta_rx_packet+0x1bc/0x2a0 [mwifiex]
[ 1303.472573] mwifiex_handle_rx_packet+0xb4/0x13c [mwifiex]
[ 1303.478243] mwifiex_rx_work_queue+0x158/0x198 [mwifiex]
[ 1303.483734] process_one_work+0x14c/0x28c
[ 1303.487845] worker_thread+0x2cc/0x3d4
[ 1303.491680] kthread+0x12c/0x208
[ 1303.495014] ret_from_fork+0x10/0x20
Add validation in the STA receive path to verify that disassoc/deauth
frames originate from the connected AP. Frames that fail this check
are discarded early, preventing them from reaching the MLME layer and
triggering WARN_ON().
This filtering logic is similar with that used in the
ieee80211_rx_mgmt_disassoc() function in mac80211, which drops
disassoc frames that don't match the current BSSID
(!ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)), ensuring
only relevant frames are processed.
Tested on:
- 8997 with FW 16.68.1.p197
Fixes: 36995892c271 ("wifi: mwifiex: add host mlme for client mode")
Cc: stable@vger.kernel.org
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.con>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250701142643.658990-1-ivitro@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the non-transmitted BSSID profile is found, immediately return
from the search to not return the wrong profile_len when the profile
is found in a multiple BSSID element that isn't the last one in the
frame.
Fixes: 5023b14cf4df ("mac80211: support profile split between elements")
Reported-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20250630154501.f26cd45a0ecd.I28e0525d06e8a99e555707301bca29265cf20dc8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In disconnect paths paths, local frame buffers are used
to build deauthentication frames to send them over the
air and as notifications to userspace. Some internal
error paths (that, given no other bugs, cannot happen)
don't always initialize the buffers before sending them
to userspace, so in the presence of other bugs they can
leak stack content. Initialize the buffers to avoid the
possibility of this happening.
Suggested-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Link: https://patch.msgid.link/20250701072213.13004-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mac80211 identifies a short beacon by the presence of the next
TBTT field, however the standard actually doesn't explicitly state that
the next TBTT can't be in a long beacon or even that it is required in
a short beacon - and as a result this validation does not work for all
vendor implementations.
The standard explicitly states that an S1G long beacon shall contain
the S1G beacon compatibility element as the first element in a beacon
transmitted at a TBTT that is not a TSBTT (Target Short Beacon
Transmission Time) as per IEEE80211-2024 11.1.3.10.1. This is validated
by 9.3.4.3 Table 9-76 which states that the S1G beacon compatibility
element is only allowed in the full set and is not allowed in the
minimum set of elements permitted for use within short beacons.
Correctly identify short beacons by the lack of an S1G beacon
compatibility element as the first element in an S1G beacon frame.
Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results")
Signed-off-by: Simon Wadsworth <simon@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250701075541.162619-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After enabling the clocks each error path must disable the clocks again.
One of them failed to do so. Unify the error paths to use goto to make it
harder for future changes to add a similar bug.
Fixes: 7ca59947b5fc ("pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250704172728.626815-2-u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Commit 9dd42d019e63 ("pwm: Allow pwm state transitions from an invalid
state") intended to allow some state transitions that were not allowed
before. The idea is sane and back then I also got the code comment
right, but the check for enabled is bogus. This resulted in state
transitions for enabled states to be allowed to have invalid duty/period
settings and thus it can happen that low-level drivers get requests for
invalid states🙄.
Invert the check to allow state transitions for disabled states only.
Fixes: 9dd42d019e63 ("pwm: Allow pwm state transitions from an invalid state")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250704172416.626433-2-u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
|
|
Pull /proc/sys dcache lookup fix from Al Viro:
"Fix for the breakage spotted by Neil in the interplay between
/proc/sys ->d_compare() weirdness and parallel lookups"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix proc_sys_compare() handling of in-lookup dentries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix the calculation of the deadline server task's runtime as this
mishap was preventing realtime tasks from running
- Avoid a race condition during migrate-swapping two tasks
- Fix the string reported for the "none" dynamic preemption option
* tag 'sched_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix dl_server runtime calculation formula
sched/core: Fix migrate_swap() vs. hotplug
sched: Fix preemption string of preempt_dynamic_none
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
- Fix the compilation of an x86 kernel on a big engian machine due to a
missed endianness conversion
* tag 'objtool_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add missing endian conversion to read_annotate()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Revert uprobes to using CAP_SYS_ADMIN again as currently they can
destructively modify kernel code from an unprivileged process
- Move a warning to where it belongs
* tag 'perf_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Revert to requiring CAP_SYS_ADMIN for uprobes
perf/core: Fix the WARN_ON_ONCE is out of lock protected region
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Make sure AMD SEV guests using secure TSC, include a TSC_FACTOR which
prevents their TSCs from going skewed from the hypervisor's
* tag 'x86_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Use TSC_FACTOR for Secure TSC frequency calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Disable FUTEX_PRIVATE_HASH for this cycle due to a performance
regression
- Add a selftests compilation product to the corresponding .gitignore
file
* tag 'locking_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Add futex_numa to .gitignore
futex: Temporary disable FUTEX_PRIVATE_HASH
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Initialize sysfs attributes properly to avoid lockdep complaining
about an uninitialized lock class
* tag 'edac_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Initialize EDAC features sysfs attributes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fixes from Borislav Petkov:
- Do not remove the MCE sysfs hierarchy if thresholding sysfs nodes
init fails due to new/unknown banks present, which in itself is not
fatal anyway; add default names for new banks
- Make sure MCE polling settings are honored after CMCI storms
- Make sure MCE threshold limit is reset after the thresholding
interrupt has been serviced
- Clean up properly and disable CMCI banks on shutdown so that a
second/kexec-ed kernel can rediscover those banks again
* tag 'ras_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make sure CMCI banks are cleared during shutdown on Intel
x86/mce/amd: Fix threshold limit reset
x86/mce/amd: Add default names for MCA banks and blocks
x86/mce: Ensure user polling settings are honored when restarting timer
x86/mce: Don't remove sysfs if thresholding sysfs init fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Have irq-msi-lib select CONFIG_GENERIC_MSI_IRQ explicitly as it uses
its facilities
* tag 'irq_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-msi-lib: Select CONFIG_GENERIC_MSI_IRQ
|
|
futex_numa was never added to the .gitignore file.
Add it.
Fixes: 9140f57c1c13 ("futex,selftests: Add another FUTEX2_NUMA selftest")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/all/20250704103749.10341-1-terry.tritton@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- Memory corruption fixes in hid-appletb-kbd driver (Qasim Ijaz)
- New device ID in hid-elecom driver (Leonard Dizon)
- Fixed several HID debugfs contants (Vicki Pfau)
* tag 'hid-for-linus-2025070502' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe
HID: Fix debug name for BTN_GEAR_DOWN, BTN_GEAR_UP, BTN_WHEEL
HID: elecom: add support for ELECOM HUGE 019B variant
HID: appletb-kbd: fix memory corruption of input_handler_list
|
|
Pull smb client fixes from Steve French:
- Two reconnect fixes including one for a reboot/reconnect race
- Fix for incorrect file type that can be returned by SMB3.1.1 POSIX
extensions
- tcon initialization fix
- Fix for resolving Windows symlinks with absolute paths
* tag 'v6.16-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix native SMB symlink traversal
smb: client: fix race condition in negotiate timeout by using more precise timing
cifs: all initializations for tcon should happen in tcon_info_alloc
smb: client: fix warning when reconnecting channel
smb: client: fix readdir returning wrong type with POSIX extensions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- designware: initialise msg_write_idx during transfer
- microchip: check return value from core xfer call
- realtek: add 'reg' property constraint to the device tree
* tag 'i2c-for-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: realtek,rtl9301: Fix missing 'reg' constraint
i2c: microchip-core: re-fix fake detections w/ i2cdetect
i2c/designware: Fix an initialization issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address system suspend failures under memory pressure in some
configurations, fix up RAPL handling on platforms where PL1 cannot be
disabled, and fix a documentation typo:
- Prevent the Intel RAPL power capping driver from allowing PL1 to be
exceeded by mistake on systems when PL1 cannot be disabled (Zhang
Rui)
- Fix a typo in the ABI documentation (Sumanth Gavini)
- Allow swap to be used a bit longer during system suspend and
hibernation to avoid suspend failures under memory pressure (Mario
Limonciello)"
* tag 'pm-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: docs: Replace "diasble" with "disable"
powercap: intel_rapl: Do not change CLAMPING bit if ENABLE bit cannot be changed
PM: Restrict swap use to later in the suspend sequence
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a problematic ACPI battery driver change merged recently"
* tag 'acpi-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: battery: negate current when discharging"
|
|
Merge fixes related to system sleep for 6.16-rc5:
- Fix typo in the ABI documentation (Sumanth Gavini).
- Allow swap to be used a bit longer during system suspend and
hibernation to avoid suspend failures under memory pressure (Mario
Limonciello).
* pm-sleep:
PM: sleep: docs: Replace "diasble" with "disable"
PM: Restrict swap use to later in the suspend sequence
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A couple of fixes for firmware drivers have come up, addressing kernel
side bugs in op-tee and ff-a code, as well as compatibility issues
with exynos-acpm and ff-a protocols.
The only devicetree fixes are for the Apple platform, addressing
issues with conformance to the bindings for the wlan, spi and mipi
nodes"
* tag 'soc-fixes-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: apple: Move touchbar mipi {address,size}-cells from dtsi to dts
arm64: dts: apple: Drop {address,size}-cells from SPI NOR
arm64: dts: apple: t8103: Fix PCIe BCM4377 nodename
optee: ffa: fix sleep in atomic context
firmware: exynos-acpm: fix timeouts on xfers handling
arm64: defconfig: update renamed PHY_SNPS_EUSB2
firmware: arm_ffa: Fix the missing entry in struct ffa_indirect_msg_hdr
firmware: arm_ffa: Replace mutex with rwlock to avoid sleep in atomic context
firmware: arm_ffa: Move memory allocation outside the mutex locking
firmware: arm_ffa: Fix memory leak by freeing notifier callback node
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- kCFI is restricted to clang-17 or newer, as earlier versions have
known bugs
- sbi_hsm_hart_start is now staticly allocated, to avoid tripping up
the SBI HSM page mapping on sparse systems.
* tag 'riscv-for-linus-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: cpu_ops_sbi: Use static array for boot_data
riscv: Require clang-17 or newer for kCFI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver fixes (the GPIO one being potentially nasty, though it
has been there for a while without anyone reporting it), and one core
fix for the rarely used combination of coupled regulators and
unbinding"
* tag 'regulator-fix-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods
regulator: mp886x: Fix ID table driver_data
regulator: sy8824x: Fix ID table driver_data
regulator: tps65219: Fix devm_kmalloc size allocation
regulator: core: fix NULL dereference on unbind due to stale coupling data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"As well as a few driver specific fixes we've got a core change here
which raises the hard coded limit on the number of devices we can
support on one SPI bus since some FPGA based systems are running into
the existing limit. This is not a good solution but it's one suitable
for this point in the release cycle, we should dynamically size the
relevant data structures which I hope will happen in the next couple
of merge windows.
We also pull in a MTD fix for the Qualcomm SNAND driver, the two fixes
cover the same issue and merging them together minimises bisection
issues"
* tag 'spi-fix-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: fix cleanup of rx_chan on failure paths
spi: spi-fsl-dspi: Clear completion counter before initiating transfer
spi: Raise limit on number of chip selects to 24
mtd: nand: qpic_common: prevent out of bounds access of BAM arrays
spi: spi-qpic-snand: reallocate BAM transactions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Mostly a few lines fixed here and there except amd/isp4 which improves
swnodes relationships but that is a new driver not in any stable
kernels yet. The think-lmi driver changes also look relatively large
but there are just many fixes to it.
The i2c/piix4 change is a effectively a revert of the commit
7e173eb82ae9 ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on
CONFIG_X86") but that required moving the header out from arch/x86
under include/linux/platform_data/
Summary:
- amd/isp4: Improve swnode graph (new driver exception)
- asus-nb-wmi: Use duo keyboard quirk for Zenbook Duo UX8406CA
- dell-lis3lv02d: Add Latitude 5500 accelerometer address
- dell-wmi-sysman: Fix WMI data block retrieval and class dev unreg
- hp-bioscfg: Fix class device unregistration
- i2c: piix4: Re-enable on non-x86 + move FCH header under platform_data/
- intel/hid: Wildcat Lake support
- mellanox:
- mlxbf-pmc: Fix duplicate event ID
- mlxbf-tmfifo: Fix vring_desc.len assignment
- mlxreg-lc: Fix bit-not-set logic check
- nvsw-sn2201: Fix bus number in error message & spelling errors
- portwell-ec: Move watchdog device under correct platform hierarchy
- think-lmi: Error handling fixes (sysfs, kset, kobject, class dev unreg)
- thinkpad_acpi: Handle HKEY 0x1402 event (2025 Thinkpads)
- wmi: Fix WMI event enablement"
* tag 'platform-drivers-x86-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (22 commits)
platform/x86: think-lmi: Fix sysfs group cleanup
platform/x86: think-lmi: Fix kobject cleanup
platform/x86: think-lmi: Create ksets consecutively
platform/mellanox: mlxreg-lc: Fix logic error in power state check
i2c: Re-enable piix4 driver on non-x86
Move FCH header to a location accessible by all archs
platform/x86/intel/hid: Add Wildcat Lake support
platform/x86: dell-wmi-sysman: Fix class device unregistration
platform/x86: think-lmi: Fix class device unregistration
platform/x86: hp-bioscfg: Fix class device unregistration
platform/x86: Update swnode graph for amd isp4
platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks
platform/x86: wmi: Update documentation of WCxx/WExx ACPI methods
platform/x86: wmi: Fix WMI event enablement
platform/mellanox: nvsw-sn2201: Fix bus number in adapter error message
platform/mellanox: Fix spelling and comment clarity in Mellanox drivers
platform/mellanox: mlxbf-pmc: Fix duplicate event ID for CACHE_DATA1
platform/x86: thinkpad_acpi: handle HKEY 0x1402 event
platform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8406CA
platform/x86: dell-lis3lv02d: Add Latitude 5500
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver fixes for 6.16-rc5. I originally wanted this
to get into -rc4, but there were some regressions that had to be
handled first. Now all looks good. Included in here are the following
fixes:
- cdns3 driver fixes
- xhci driver fixes
- typec driver fixes
- USB hub fixes (this is what took the longest to get right)
- new USB driver quirks added
- chipidea driver fixes
All of these have been in linux-next for a while and now we have no
more reported problems with them"
* tag 'usb-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: hub: Fix flushing of delayed work used for post resume purposes
xhci: dbc: Flush queued requests before stopping dbc
xhci: dbctty: disable ECHO flag by default
xhci: Disable stream for xHC controller with XHCI_BROKEN_STREAMS
usb: xhci: quirk for data loss in ISOC transfers
usb: dwc3: gadget: Fix TRB reclaim logic for short transfers and ZLPs
usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm
usb: typec: displayport: Fix potential deadlock
usb: typec: altmodes/displayport: do not index invalid pin_assignments
usb: cdnsp: Fix issue with CV Bad Descriptor test
usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach
Revert "usb: xhci: Implement xhci_handshake_check_state() helper"
usb: xhci: Skip xhci_reset in xhci_resume if xhci is being removed
usb: gadget: u_serial: Fix race condition in TTY wakeup
Revert "usb: gadget: u_serial: Add null pointer check in gs_start_io"
usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume
usb: acpi: fix device link removal
usb: hub: fix detection of high tier USB3 devices behind suspended hubs
Logitech C-270 even more broken
usb: dwc3: Abort suspend on soft disconnect failure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
* tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
Input: alps - use scnprintf() to suppress truncation warning
Input: iqs7222 - explicitly define number of external channels
Input: xpad - support Acer NGR 200 Controller
Input: xpad - return errors from xpad_try_sending_next_out_packet() up
Input: xpad - adjust error handling for disconnect
Input: apple_z2 - drop default ARCH_APPLE in Kconfig
Input: Fully open-code compatible for grepping
dt-bindings: HID: i2c-hid: elan: Introduce Elan eKTH8D18
Input: psmouse - switch to use scnprintf() to suppress truncation warning
Input: lifebook - switch to use scnprintf() to suppress truncation warning
Input: alps - switch to use scnprintf() to suppress truncation warning
Input: atkbd - switch to use scnprintf() to suppress truncation warning
Input: fsia6b - suppress buffer truncation warning for phys
Input: iqs626a - replace snprintf() with scnprintf()
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, bit of a bumper crop, the usual amdgpu/xe/i915
suspects, then there is a large scattering of fixes across core and
drivers. I think the simple panel lookup fix is probably the largest,
the sched race fix is also fun, but I don't see anything standing out
too badly.
dma-buf:
- fix timeout handling
gem:
- fix framebuffer object references
sched:
- fix spsc queue job count race
bridge:
- fix aux hpd bridge of node
- panel: move missing flag handling
- samsung-dsim: fix %pK usage to %p
panel:
- fix problem with simple panel lookup
ttm:
- fix error path handling
amdgpu:
- SDMA 5.x reset fix
- Add missing firmware declaration
- Fix leak in amdgpu_ctx_mgr_entity_fini()
- Freesync fix
- OLED backlight fix
amdkfd:
- mtype fix for ext coherent system memory
- MMU notifier fix
- gfx7/8 fix
xe:
- Fix chunking the PTE updates and overflowing the maximum number of
dwords with with MI_STORE_DATA_IMM
- Move WA BB to the LRC BO to mitigate hangs on context switch
- Fix frequency/flush WAs for BMG
- Fix kconfig prompt title and description
- Do not require kunit
- Extend 14018094691 WA to BMG
- Fix wedging the device on signal
i915:
- Make mei interrupt top half irq disabled to fix RT builds
- Fix timeline left held on VMA alloc error
- Fix NULL pointer deref in vlv_dphy_param_init()
- Fix selftest mock_request() to avoid NULL deref
exynos:
- switch to using %p instead of %pK
- fix vblank NULL ptr race
- fix lockup on samsung peach-pit/pi chromebooks
vesadrm:
- NULL ptr fix
vmwgfx:
- fix encrypted memory allocation bug
v3d:
- fix irq enabled during reset"
* tag 'drm-fixes-2025-07-04' of https://gitlab.freedesktop.org/drm/kernel: (41 commits)
drm/xe: Do not wedge device on killed exec queues
drm/xe: Extend WA 14018094691 to BMG
drm/v3d: Disable interrupts before resetting the GPU
drm/gem: Acquire references on GEM handles for framebuffers
drm/sched: Increment job count before swapping tail spsc queue
drm/xe: Allow dropping kunit dependency as built-in
drm/xe: Fix kconfig prompt
drm/xe/bmg: Update Wa_22019338487
drm/xe/bmg: Update Wa_14022085890
drm/xe: Split xe_device_td_flush()
drm/xe/xe_guc_pc: Lock once to update stashed frequencies
drm/xe/guc_pc: Add _locked variant for min/max freq
drm/xe: Make WA BB part of LRC BO
drm/xe: Fix out-of-bounds field write in MI_STORE_DATA_IMM
drm/i915/gsc: mei interrupt top half should be in irq disabled context
drm/i915/gt: Fix timeline left held on VMA alloc error
drm/vmwgfx: Fix guests running with TDX/SEV
drm/amd/display: Don't allow OLED to go down to fully off
drm/amd/display: Added case for when RR equals panel's max RR using freesync
drm/amdkfd: add hqd_sdma_get_doorbell callbacks for gfx7/8
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Rockchip: fix infinite loop caused by probing race condition
- Intel VT-d: assign devtlb cache tag on ATS enablement
* tag 'iommu-fixes-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Assign devtlb cache tag on ATS enablement
iommu/rockchip: prevent iommus dead loop when two masters share one IOMMU
|
|
Pull block fixes from Jens Axboe:
- NVMe fixes via Christoph:
- fix incorrect cdw15 value in passthru error logging (Alok Tiwari)
- fix memory leak of bio integrity in nvmet (Dmitry Bogdanov)
- refresh visible attrs after being checked (Eugen Hristev)
- fix suspicious RCU usage warning in the multipath code (Geliang Tang)
- correctly account for namespace head reference counter (Nilay Shroff)
- Fix for a regression introduced in ublk in this cycle, where it would
attempt to queue a canceled request.
- brd RCU sleeping fix, also introduced in this cycle. Bare bones fix,
should be improved upon for the next release.
* tag 'block-6.16-20250704' of git://git.kernel.dk/linux:
brd: fix sleeping function called from invalid context in brd_insert_page()
ublk: don't queue request if the associated uring_cmd is canceled
nvme-multipath: fix suspicious RCU usage warning
nvme-pci: refresh visible attrs after being checked
nvmet: fix memory leak of bio integrity
nvme: correctly account for namespace head reference counter
nvme: Fix incorrect cdw15 value in passthru error logging
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.16-rc5
designware: initialise msg_write_idx during transfer
microchip: check return value from core xfer call
realtek: add 'reg' property constraint to the device tree
|
|
Pull bcachefs fixes from Kent Overstreet:
"The 'opts.casefold_disabled' patch is non critical, but would be a
6.15 backport; it's to address the casefolding + overlayfs
incompatibility that was discovvered late.
It's late because I was hoping that this would be addressed on the
overlayfs side (and will be in 6.17), but user reports keep coming in
on this one (lots of people are using docker these days)"
* tag 'bcachefs-2025-07-03' of git://evilpiepirate.org/bcachefs:
bcachefs: opts.casefold_disabled
bcachefs: Work around deadlock to btree node rewrites in journal replay
bcachefs: Fix incorrect transaction restart handling
bcachefs: fix btree_trans_peek_prev_journal()
bcachefs: mark invalid_btree_id autofix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a regression caused by the anonymous inode rework. Making them
regular files causes various places in the kernel to tip over
starting with io_uring.
Revert to the former status quo and port our assertion to be based on
checking the inode so we don't lose the valuable VFS_*_ON_*()
assertions that have already helped discover weird behavior our
outright bugs.
- Fix the the upper bound calculation in fuse_fill_write_pages()
- Fix priority inversion issues in the eventpoll code
- Make secretmen use anon_inode_make_secure_inode() to avoid bypassing
the LSM layer
- Fix a netfs hang due to missing case in final DIO read result
collection
- Fix a double put of the netfs_io_request struct
- Provide some helpers to abstract out NETFS_RREQ_IN_PROGRESS flag
wrangling
- Fix infinite looping in netfs_wait_for_pause/request()
- Fix a netfs ref leak on an extra subrequest inserted into a request's
list of subreqs
- Fix various cifs RPC callbacks to set NETFS_SREQ_NEED_RETRY if a
subrequest fails retriably
- Fix a cifs warning in the workqueue code when reconnecting a channel
- Fix the updating of i_size in netfs to avoid a race between testing
if we should have extended the file with a DIO write and changing
i_size
- Merge the places in netfs that update i_size on write
- Fix coredump socket selftests
* tag 'vfs-6.16-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
anon_inode: rework assertions
netfs: Update tracepoints in a number of ways
netfs: Renumber the NETFS_RREQ_* flags to make traces easier to read
netfs: Merge i_size update functions
netfs: Fix i_size updating
smb: client: set missing retry flag in cifs_writev_callback()
smb: client: set missing retry flag in cifs_readv_callback()
smb: client: set missing retry flag in smb2_writev_callback()
netfs: Fix ref leak on inserted extra subreq in write retry
netfs: Fix looping in wait functions
netfs: Provide helpers to perform NETFS_RREQ_IN_PROGRESS flag wangling
netfs: Fix double put of request
netfs: Fix hang due to missing case in final DIO read result collection
eventpoll: Fix priority inversion problem
fuse: fix fuse_fill_write_pages() upper bound calculation
fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass
selftests/coredump: Fix "socket_detect_userspace_client" test failure
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
An update for the MAINTAINERS file, plus a number of small driver
specific fixes and device quirks.
|
|
Register X0 contains PIE_E1_ASM and should not be written into REG_TCR2_EL1
which could have an adverse impact otherwise. This has remained undetected
till now probably because current value for PIE_E1_ASM (0xcc880e0ac0800000)
clears TCR2_EL1 which again gets set subsequently with 'tcr2' after testing
for FEAT_TCR2.
Drop this unwarranted 'msr' which is a stray change from an earlier commit.
This line got re-introduced when rebasing on top of the commit 926b66e2ebc8
("arm64: setup: name 'tcr2' register").
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Fixes: 7052e808c446 ("arm64/sysreg: Get rid of the TCR2_EL1x SysregFields")
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250704063812.298914-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We do not currently issue an ISB after updating POR_EL0 when
context-switching it, for instance. The rationale is that if the old
value of POR_EL0 is more restrictive and causes a fault during
uaccess, the access will be retried [1]. In other words, we are
trading an ISB on every context-switching for the (unlikely)
possibility of a spurious fault. We may also miss faults if the new
value of POR_EL0 is more restrictive, but that's considered
acceptable.
However, as things stand, a spurious Overlay fault results in
uaccess failing right away since it causes fault_from_pkey() to
return true. If an Overlay fault is reported, we therefore need to
double check POR_EL0 against vma_pkey(vma) - this is what
arch_vma_access_permitted() already does.
As it turns out, we already perform that explicit check if no
Overlay fault is reported, and we need to keep that check (see
comment added in fault_from_pkey()). Net result: the Overlay ISS2
bit isn't of much help to decide whether a pkey fault occurred.
Remove the check for the Overlay bit from fault_from_pkey() and
add a comment to try and explain the situation. While at it, also
add a comment to permission_overlay_switch() in case anyone gets
surprised by the lack of ISB.
[1] https://lore.kernel.org/linux-arm-kernel/ZtYNGBrcE-j35fpw@arm.com/
Fixes: 160a8e13de6c ("arm64: context switch POR_EL0 register")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20250619160042.2499290-2-kevin.brodsky@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We have a number of hwcaps for various SME subfeatures enumerated via
ID_AA64SMFR0_EL1. Currently we advertise these without cross checking
against the main SME feature, advertised in ID_AA64PFR1_EL1.SME which
means that if the two are out of sync userspace can see a confusing
situation where SME subfeatures are advertised without the base SME
hwcap. This can be readily triggered by using the arm64.nosme override
which only masks out ID_AA64PFR1_EL1.SME, and there have also been
reports of VMMs which do the same thing.
Fix this as we did previously for SVE in 064737920bdb ("arm64: Filter
out SVE hwcaps when FEAT_SVE isn't implemented") by filtering out the
SME subfeature hwcaps when FEAT_SME is not present.
Fixes: 5e64b862c482 ("arm64/sme: Basic enumeration support")
Reported-by: Yury Khrustalev <yury.khrustalev@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250620-arm64-sme-filter-hwcaps-v1-1-02b9d3c2d8ef@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For really large values of CONFIG_NR_CPUS, a CPU mask value should
not be put on the stack:
arch/arm64/kernel/smp.c:1188:1: error: the frame size of 8544 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
This could be achieved using alloc_cpumask_var(), which makes it
depend on CONFIG_CPUMASK_OFFSTACK, but as this function is already
serialized and can only run on one CPU, making the variable 'static'
is easier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250620111045.3364827-1-arnd@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
During EL2 setup if GCS is advertised in the ID registers we will reset the
GCS control registers GCSCR_EL1 and GCSCRE0_EL1 to known values in order to
ensure it is disabled. This is done without taking into account overrides
supplied on the command line, meaning that if the user has configured
arm64.nogcs we will still access these GCS specific registers. If this was
done because EL3 does not enable GCS this results in traps to EL3 and a
failed boot which is not what users would expect from having set that
parameter.
Move the writes to these registers to finalise_el2_state where we can pay
attention to the command line overrides. For simplicity we leave the
updates to the traps in HCRX_EL2 and the FGT registers in place since these
should only be relevant for KVM guests and KVM will manage them itself for
guests. This follows the existing practice for other similar traps for
overridable features such as those for TPIDR2_EL0 and SMPRI_EL1.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250619-arm64-fix-nogcs-v1-1-febf2973672e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Aneesh reports that his kernel fails to boot in nVHE mode with
KVM's protected mode enabled. Further investigation by Mostafa
reveals that this fails because CONFIG_JUMP_LABEL=n and that
we have static keys shared between EL1 and EL2.
While this can be worked around, it is obvious that we have long
relied on having CONFIG_JUMP_LABEL enabled at all times, as all
supported compilers now have 'asm goto' (which is the basic block
for jump labels).
Let's simplify our lives once and for all by mandating jump labels.
It's not like anyone else is testing anything without them, and
we already rely on them for other things (kfence, xfs, preempt).
Link: https://lore.kernel.org/r/yq5ah60pkq03.fsf@kernel.org
Reported-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Reported-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250613141936.2219895-1-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
KASAN reports invalid accesses during arch_stack_walk() for EFI runtime
services due to vmalloc tagging[1]. The EFI runtime stack must be allocated
with KASAN tags reset to avoid false positives.
This patch uses arch_alloc_vmap_stack() instead of __vmalloc_node() for
EFI stack allocation, which internally calls kasan_reset_tag()
The changes ensure EFI runtime stacks are properly sanitized for KASAN
while maintaining functional consistency.
Link: https://lore.kernel.org/all/aFVVEgD0236LdrL6@gmail.com/ [1]
Suggested-by: Andrey Konovalov <andreyknvl@gmail.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20250704-arm_kasan-v2-1-32ebb4fd7607@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
CONFIG_RFS_ACCEL
I received a kernel-test-bot report[1] that shows the
[-Wunused-but-set-variable] warning. Since the previous commit I made, as
the 'Fixes' tag shows, gives users an option to turn on and off the
CONFIG_RFS_ACCEL, the issue then can be discovered and reproduced with
GCC specifically.
Like Simon and Jakub suggested, use fewer #ifdefs which leads to fewer
bugs.
[1]
All warnings (new ones prefixed by >>):
drivers/net/ethernet/broadcom/bnxt/bnxt.c: In function 'bnxt_request_irq':
>> drivers/net/ethernet/broadcom/bnxt/bnxt.c:10703:9: warning: variable 'j' set but not used [-Wunused-but-set-variable]
10703 | int i, j, rc = 0;
| ^
Fixes: 9b6a30febddf ("net: allow rps/rfs related configs to be switched")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506282102.x1tXt0qz-lkp@intel.com/
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In our testing with 6.12 based kernel on a big.LITTLE system, we were
seeing instances of RT tasks being blocked from running on the LITTLE
cpus for multiple seconds of time, apparently by the dl_server. This
far exceeds the default configured 50ms per second runtime.
This is due to the fair dl_server runtime calculation being scaled
for frequency & capacity of the cpu.
Consider the following case under a Big.LITTLE architecture:
Assume the runtime is: 50,000,000 ns, and Frequency/capacity
scale-invariance defined as below:
Frequency scale-invariance: 100
Capacity scale-invariance: 50
First by Frequency scale-invariance,
the runtime is scaled to 50,000,000 * 100 >> 10 = 4,882,812
Then by capacity scale-invariance,
it is further scaled to 4,882,812 * 50 >> 10 = 238,418.
So it will scaled to 238,418 ns.
This smaller "accounted runtime" value is what ends up being
subtracted against the fair-server's runtime for the current period.
Thus after 50ms of real time, we've only accounted ~238us against the
fair servers runtime. This 209:1 ratio in this example means that on
the smaller cpu the fair server is allowed to continue running,
blocking RT tasks, for over 10 seconds before it exhausts its supposed
50ms of runtime. And on other hardware configurations it can be even
worse.
For the fair deadline_server, to prevent realtime tasks from being
unexpectedly delayed, we really do want to use fixed time, and not
scaled time for smaller capacity/frequency cpus. So remove the scaling
from the fair server's accounting to fix this.
Fixes: a110a81c52a9 ("sched/deadline: Deferrable dl server")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: John Stultz <jstultz@google.com>
Signed-off-by: kuyo chang <kuyo.chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: John Stultz <jstultz@google.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20250702021440.2594736-1-kuyo.chang@mediatek.com
|
|
Commit <4f1492efb495> ("iommu/vt-d: Revert ATS timing change to fix boot
failure") placed the enabling of ATS in the probe_finalize callback. This
occurs after the default domain attachment, which is when the ATS cache
tag is assigned. Consequently, the device TLB cache tag is missed when the
domain is attached, leading to the device TLB not being invalidated in the
iommu_unmap paths.
Fix this by assigning the CACHE_TAG_DEVTLB cache tag when ATS is enabled.
Fixes: 4f1492efb495 ("iommu/vt-d: Revert ATS timing change to fix boot failure")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250625050135.3129955-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20250628100351.3198955-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
