summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-01-09netfilter: nft_limit: move stateful fields out of expression dataPablo Neira Ayuso
In preparation for the rule blob representation. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09netfilter: nft_limit: rename stateful structurePablo Neira Ayuso
From struct nft_limit to nft_limit_priv. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09netfilter: nft_numgen: move stateful fields out of expression dataPablo Neira Ayuso
In preparation for the rule blob representation. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09netfilter: nft_quota: move stateful fields out of expression dataPablo Neira Ayuso
In preparation for the rule blob representation. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09netfilter: nft_last: move stateful fields out of expression dataPablo Neira Ayuso
In preparation for the rule blob representation. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09netfilter: nft_connlimit: move stateful fields out of expression dataPablo Neira Ayuso
In preparation for the rule blob representation. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09netfilter: egress: avoid a lockdep splatFlorian Westphal
include/linux/netfilter_netdev.h:97 suspicious rcu_dereference_check() usage! 2 locks held by sd-resolve/1100: 0: ..(rcu_read_lock_bh){1:3}, at: ip_finish_output2 1: ..(rcu_read_lock_bh){1:3}, at: __dev_queue_xmit __dev_queue_xmit+0 .. The helper has two callers, one uses rcu_read_lock, the other rcu_read_lock_bh(). Annotate the dereference to reflect this. Fixes: 42df6e1d221dd ("netfilter: Introduce egress hook") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09net: prefer nf_ct_put instead of nf_conntrack_putFlorian Westphal
Its the same as nf_conntrack_put(), but without the need for an indirect call. The downside is a module dependency on nf_conntrack, but all of these already depend on conntrack anyway. Cc: Paul Blakey <paulb@mellanox.com> Cc: dev@openvswitch.org Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09netfilter: conntrack: avoid useless indirection during conntrack destructionFlorian Westphal
nf_ct_put() results in a usesless indirection: nf_ct_put -> nf_conntrack_put -> nf_conntrack_destroy -> rcu readlock + indirect call of ct_hooks->destroy(). There are two _put helpers: nf_ct_put and nf_conntrack_put. The latter is what should be used in code that MUST NOT cause a linker dependency on the conntrack module (e.g. calls from core network stack). Everyone else should call nf_ct_put() instead. A followup patch will convert a few nf_conntrack_put() calls to nf_ct_put(), in particular from modules that already have a conntrack dependency such as act_ct or even nf_conntrack itself. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09netfilter: make function op structures constFlorian Westphal
No functional changes, these structures should be const. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09netfilter: core: move ip_ct_attach indirection to struct nf_ct_hookFlorian Westphal
ip_ct_attach predates struct nf_ct_hook, we can place it there and remove the exported symbol. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09netfilter: conntrack: convert to refcount_t apiFlorian Westphal
Convert nf_conn reference counting from atomic_t to refcount_t based api. refcount_t api provides more runtime sanity checks and will warn on certain constructs, e.g. refcount_inc() on a zero reference count, which usually indicates use-after-free. For this reason template allocation is changed to init the refcount to 1, the subsequenct add operations are removed. Likewise, init_conntrack() is changed to set the initial refcount to 1 instead refcount_inc(). This is safe because the new entry is not (yet) visible to other cpus. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09netfilter: conntrack: Use max() instead of doing it manuallyJiapeng Chong
Fix following coccicheck warning: ./include/net/netfilter/nf_conntrack.h:282:16-17: WARNING opportunity for max(). Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09Merge tag 'for-net-next-2022-01-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for Foxconn QCA 0xe0d0 - Fix HCI init sequence on MacBook Air 8,1 and 8,2 - Fix Intel firmware loading on legacy ROM devices * tag 'for-net-next-2022-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: Bluetooth: hci_sock: fix endian bug in hci_sock_setsockopt() Bluetooth: L2CAP: uninitialized variables in l2cap_sock_setsockopt() Bluetooth: btqca: sequential validation Bluetooth: btusb: Add support for Foxconn QCA 0xe0d0 Bluetooth: btintel: Fix broken LED quirk for legacy ROM devices Bluetooth: hci_event: Rework hci_inquiry_result_with_rssi_evt Bluetooth: btbcm: disable read tx power for MacBook Air 8,1 and 8,2 Bluetooth: hci_qca: Fix NULL vs IS_ERR_OR_NULL check in qca_serdev_probe Bluetooth: hci_bcm: Check for error irq ==================== Link: https://lore.kernel.org/r/20220107210942.3750887-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09Merge tag 'linux-can-fixes-for-5.16-20220109' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-01-09 The first patch is by Johan Hovold and fixes a mem leak in the error path of the softing_cs driver. The next patch is by me and fixes a set but not used variable warning in the softing driver. Jiasheng Jiang's patch for the xilinx_can driver adds the missing error checking when getting the IRQ. Lad Prabhakar contributes a patch for the rcar_canfd driver to fix a mem leak in the error path. The last patch is by Brian Silverman and properly initializes the send USB messages to avoid spurious CAN error frames. * tag 'linux-can-fixes-for-5.16-20220109' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved} can: rcar_canfd: rcar_canfd_channel_probe(): make sure we free CAN network device can: xilinx_can: xcan_probe(): check for error irq can: softing: softing_startstop(): fix set but not used variable warning can: softing_cs: softingcs_probe(): fix memleak on registration failure ==================== Link: https://lore.kernel.org/r/20220109134040.1945428-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "A small fixup to the Zinitix touchscreen driver to avoid enabling the IRQ line before we successfully requested it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: zinitix - make sure the IRQ is allocated before it gets enabled
2022-01-09Merge tag 'soc-fixes-5.16-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fix from Olof Johansson: "One more fix for 5.16 I had missed one patch when I sent up what I thought was the last batch of fixes for this release. This one fixes issues on the Raspberry Pi platforms due to gpio init changes this release, so hopefully we can get it merged before final release is cut" * tag 'soc-fixes-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: gpio-ranges property is now required
2022-01-09Merge tag 'perf-tools-fixes-for-v5.16-2022-01-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Revert "libtraceevent: Increase libtraceevent logging when verbose", breaks the build with libtraceevent-1.3.0, i.e. when building with 'LIBTRACEEVENT_DYNAMIC=1'. - Avoid early exit in 'perf trace' due to running SIGCHLD handler before it makes sense to. It can happen when using a BPF source code event that have to be first built into an object file. * tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: Revert "libtraceevent: Increase libtraceevent logging when verbose" perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to
2022-01-09Revert "drm/amdgpu: stop scheduler when calling hw_fini (v2)"Len Brown
This reverts commit f7d6779df642720e22bffd449e683bb8690bd3bf. This bisected regression has impacted suspend-resume stability since 5.15-rc1. It regressed -stable via 5.14.10. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215315 Fixes: f7d6779df64 ("drm/amdgpu: stop scheduler when calling hw_fini (v2)") Cc: Guchun Chen <guchun.chen@amd.com> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org> # 5.14+ Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-09Merge tag 'linux-can-next-for-5.17-20220108' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2022-01-08 this is a pull request of 22 patches for net-next/master. The first patch is by Tom Rix and fixes an uninitialized variable in the janz-ican3 driver (introduced in linux-can-next-for-5.17-20220105). The next 13 patches are by my and target the mcp251xfd driver. First several cleanup patches, then the driver is prepared for the upcoming ethtool ring parameter and IRQ coalescing support, which is added in a later pull request. The remaining 8 patches are by Dario Binacchi and me and enhance the flexcan driver. The driver is moved into a sub directory. An ethtool private flag is added to optionally disable CAN RTR frame reception, to make use of more RX buffers. The resulting RX buffer configuration can be read by ethtool ring parameter support. Finally documentation for the ethtool private flag is added to the Documentation/networking/device_drivers/can directory. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-09can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved}Brian Silverman
No information is deliberately sent in hf->flags in host -> device communications, but the open-source candleLight firmware echoes it back, which can result in the GS_CAN_FLAG_OVERFLOW flag being set and generating spurious ERRORFRAMEs. While there also initialize the reserved member with 0. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220106002952.25883-1-brian.silverman@bluerivertech.com Link: https://github.com/candle-usb/candleLight_fw/issues/87 Cc: stable@vger.kernel.org Signed-off-by: Brian Silverman <brian.silverman@bluerivertech.com> [mkl: initialize the reserved member, too] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-09can: rcar_canfd: rcar_canfd_channel_probe(): make sure we free CAN network ↵Lad Prabhakar
device Make sure we free CAN network device in the error path. There are several jumps to fail label after allocating the CAN network device successfully. This patch places the free_candev() under fail label so that in failure path a jump to fail label frees the CAN network device. Fixes: 76e9353a80e9 ("can: rcar_canfd: Add support for RZ/G2L family") Link: https://lore.kernel.org/all/20220106114801.20563-1-prabhakar.mahadev-lad.rj@bp.renesas.com Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-09can: xilinx_can: xcan_probe(): check for error irqJiasheng Jiang
For the possible failure of the platform_get_irq(), the returned irq could be error number and will finally cause the failure of the request_irq(). Consider that platform_get_irq() can now in certain cases return -EPROBE_DEFER, and the consequences of letting request_irq() effectively convert that into -EINVAL, even at probe time rather than later on. So it might be better to check just now. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Link: https://lore.kernel.org/all/20211224021324.1447494-1-jiasheng@iscas.ac.cn Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-09can: softing: softing_startstop(): fix set but not used variable warningMarc Kleine-Budde
In the function softing_startstop() the variable error_reporting is assigned but not used. The code that uses this variable is commented out. Its stated that the functionality is not finally verified. To fix the warning: | drivers/net/can/softing/softing_fw.c:424:9: error: variable 'error_reporting' set but not used [-Werror,-Wunused-but-set-variable] remove the comment, activate the code, but add a "0 &&" to the if expression and rely on the optimizer rather than the preprocessor to remove the code. Link: https://lore.kernel.org/all/20220109103126.1872833-1-mkl@pengutronix.de Fixes: 03fd3cf5a179 ("can: add driver for Softing card") Cc: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08Input: zinitix - make sure the IRQ is allocated before it gets enabledNikita Travkin
Since irq request is the last thing in the driver probe, it happens later than the input device registration. This means that there is a small time window where if the open method is called the driver will attempt to enable not yet available irq. Fix that by moving the irq request before the input device registration. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 26822652c85e ("Input: add zinitix touchscreen driver") Signed-off-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20220106072840.36851-2-nikita@trvn.ru Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-01-08can: softing_cs: softingcs_probe(): fix memleak on registration failureJohan Hovold
In case device registration fails during probe, the driver state and the embedded platform device structure needs to be freed using platform_device_put() to properly free all resources (e.g. the device name). Fixes: 0a0b7a5f7a04 ("can: add driver for Softing card") Link: https://lore.kernel.org/all/20211222104843.6105-1-johan@kernel.org Cc: stable@vger.kernel.org # 2.6.38 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08ARM: dts: gpio-ranges property is now requiredPhil Elwell
Since [1], added in 5.7, the absence of a gpio-ranges property has prevented GPIOs from being restored to inputs when released. Add those properties for BCM283x and BCM2711 devices. [1] commit 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges") Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org Fixes: 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges") Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Florian Fainelli <f.fainelli@gmail.com> Reported-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Phil Elwell <phil@raspberrypi.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211206092237.4105895-3-phil@raspberrypi.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2022-01-08Merge tag 'soc-fixes-5.16-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A few more fixes have come in, nothing overly severe but would be good to get in by final release: - More specific compatible fields on the qspi controller for socfpga, to enable quirks in the driver - A runtime PM fix for Renesas to fix mismatched reference counts on errors" * tag 'soc-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: socfpga: change qspi to "intel,socfpga-qspi" dt-bindings: spi: cadence-quadspi: document "intel,socfpga-qspi" reset: renesas: Fix Runtime PM usage
2022-01-08docs: networking: device drivers: can: add flexcanDario Binacchi
Add initial documentation for Flexcan driver. Link: https://lore.kernel.org/all/20220107193105.1699523-8-mkl@pengutronix.de Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08docs: networking: device drivers: add can sub-folderDario Binacchi
Add the container for CAN drivers documentation. Link: https://lore.kernel.org/all/20220107193105.1699523-7-mkl@pengutronix.de Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: flexcan: add ethtool support to get rx/tx ring parametersDario Binacchi
This patch adds ethtool support to get the number of message buffers configured for reception/transmission, which may also depends on runtime configurations such as the 'rx-rtr' flag state. Link: https://lore.kernel.org/all/20220108181633.420433-1-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> [mkl: port to net-next/master, replace __sw_hweight64 by simpler calculation] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: flexcan: add ethtool support to change rx-rtr setting during runtimeMarc Kleine-Budde
This patch adds a private flag to the flexcan driver to switch the "rx-rtr" setting on and off. "rx-rtr" on - Receive RTR frames. (default) The CAN controller can and will receive RTR frames. On some IP cores the controller cannot receive RTR frames in the more performant "RX mailbox" mode and will use "RX FIFO" mode instead. "rx-rtr" off - Waive ability to receive RTR frames. (not supported on all IP cores) This mode activates the "RX mailbox mode" for better performance, on some IP cores RTR frames cannot be received anymore. The "RX FIFO" mode uses a FIFO with a depth of 6 CAN frames. The "RX mailbox" mode uses up to 62 mailboxes. Link: https://lore.kernel.org/all/20220107193105.1699523-6-mkl@pengutronix.de Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Co-developed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Fix the regression with AMD GPU suspend by reverting the handling of bus regulators in the I2C core. Also, there is a fix for the MPC driver to prevent an out-of-bound-access" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: core: support bus regulator controlling in adapter" i2c: mpc: Avoid out of bounds memory access
2022-01-08Merge tag 'for-v5.16-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply fixes from Sebastian Reichel: "Three fixes for the 5.16 cycle: - Avoid going beyond last capacity in the power-supply core - Replace 1E6L with NSEC_PER_MSEC to avoid floating point calculation in LLVM resulting in a build failure - Fix ADC measurements in bq25890 charger driver" * tag 'for-v5.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: reset: ltc2952: Fix use of floating point literals power: bq25890: Enable continuous conversion for ADC at charging power: supply: core: Break capacity loop
2022-01-08can: flexcan: add more quirks to describe RX path capabilitiesMarc Kleine-Budde
Most flexcan IP cores support 2 RX modes: - FIFO - mailbox Some IP core versions cannot receive CAN RTR messages via mailboxes. This patch adds quirks to document this. This information will be used in a later patch to switch from FIFO to more performant mailbox mode at the expense of losing the ability to receive RTR messages. This trade off is beneficial in certain use cases. Link: https://lore.kernel.org/all/20220107193105.1699523-5-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: flexcan: rename RX modesMarc Kleine-Budde
Most flexcan IP cores support 2 RX modes: - FIFO - mailbox The names for these modes were chosen to reflect the name of the rx-offload mode they are using. The name of the RX modes should better reflect their difference with regards the flexcan IP core. So this patch renames the various occurrences of OFF_FIFO to RX_FIFO and OFF_TIMESTAMP to RX_MAILBOX: | FLEXCAN_TX_MB_RESERVED_OFF_FIFO -> FLEXCAN_TX_MB_RESERVED_RX_FIFO | FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP -> FLEXCAN_TX_MB_RESERVED_RX_MAILBOX | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP -> FLEXCAN_QUIRK_USE_RX_MAILBOX Link: https://lore.kernel.org/all/20220107193105.1699523-4-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: flexcan: allow to change quirks at runtimeDario Binacchi
This is a preparation patch for the upcoming support to change the rx-rtr capability via the ethtool API. Link: https://lore.kernel.org/all/20220107193105.1699523-3-mkl@pengutronix.de Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: flexcan: move driver into separate sub directoryMarc Kleine-Budde
This patch moves the flexcan driver into a separate directory, a later patch will add more files. Link: https://lore.kernel.org/all/20220107193105.1699523-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: mcp251xfd: introduce and make use of mcp251xfd_is_fd_mode()Marc Kleine-Budde
This patch replaces the open coded check, if the chip's FIFOs are configured for CAN-FD mode, by the newly introduced function mcp251xfd_is_fd_mode(). Link: https://lore.kernel.org/all/20220105154300.1258636-14-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: mcp251xfd: move ring init into separate functionMarc Kleine-Budde
This patch moves the ring initialization from the mcp251xfd core file into a separate one to make the driver a bit more orderly. Link: https://lore.kernel.org/all/20220105154300.1258636-13-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: mcp251xfd: move chip FIFO init into separate fileMarc Kleine-Budde
This patch moves the chip FIFO initialization from the mcp251xfd core file into a separate one to make the driver a bit more orderly. Link: https://lore.kernel.org/all/20220105154300.1258636-12-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: mcp251xfd: move TEF handling into separate fileMarc Kleine-Budde
This patch moves the TEF handling from the mcp251xfd core file into a separate one to make the driver a bit more orderly. Link: https://lore.kernel.org/all/20220105154300.1258636-11-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: mcp251xfd: move TX handling into separate fileMarc Kleine-Budde
This patch moves the TX handling from the mcp251xfd core file into a separate one to make the driver a bit more orderly. Link: https://lore.kernel.org/all/20220105154300.1258636-10-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: mcp251xfd: move RX handling into separate fileMarc Kleine-Budde
This patch moves the RX handling from the mcp251xfd core file into a separate one to make the driver a bit more orderly. Link: https://lore.kernel.org/all/20220105154300.1258636-9-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: mcp251xfd: mcp251xfd.h: sort function prototypesMarc Kleine-Budde
The .c files in the Makefile are ordered alphabetically. This patch groups the function prototypes by their corresponding .c file and brings the into the same order. Link: https://lore.kernel.org/all/20220105154300.1258636-8-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: mcp251xfd: mcp251xfd_handle_rxovif(): denote RX overflow message to ↵Marc Kleine-Budde
debug + add rate limiting A RX overflow usually happens during high system load. Printing overflow messages to the kernel log, which on embedded systems often is outputted on the serial console, even increases the system load. To decrease the system load in these situations, denote the messages to debug level and wrap them with net_ratelimit(). Link: https://lore.kernel.org/all/20220105154300.1258636-7-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: mcp251xfd: mcp251xfd_open(): make use of pm_runtime_resume_and_get()Marc Kleine-Budde
With patch | dd8088d5a896 PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter the usual pm_runtime_get_sync() and pm_runtime_put_noidle() in-case-of-error dance is no longer needed. Convert the mcp251xfd driver to use this function. Link: https://lore.kernel.org/all/20220105154300.1258636-6-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: mcp251xfd: mcp251xfd_open(): open_candev() firstMarc Kleine-Budde
This patch exchanges the order of open_candev() and pm_runtime_get_sync(), so that open_candev() is called first. A usual reason why open_candev() fails is missing CAN bit rate configuration. It makes no sense to resume the device from PM sleep first just to put it to sleep if the bit rate is not configured. Link: https://lore.kernel.org/all/20220105154300.1258636-5-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: mcp251xfd: add missing newline to printed stringsMarc Kleine-Budde
This patch adds the missing newline to printed strings. Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Link: https://lore.kernel.org/all/20220105154300.1258636-4-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08can: mcp251xfd: mcp251xfd_tef_obj_read(): fix typo in error messageMarc Kleine-Budde
This patch fixes a typo in the error message in mcp251xfd_tef_obj_read(), if trying to read too many objects. Link: https://lore.kernel.org/all/20220105154300.1258636-3-mkl@pengutronix.de Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 18:19:46 +0000