| Age | Commit message (Collapse) | Author |
|---|
|
Add few tests with may_goto and negative offset.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240619235355.85031-2-alexei.starovoitov@gmail.com
|
|
Zac's syzbot crafted a bpf prog that exposed two bugs in may_goto.
The 1st bug is the way may_goto is patched. When offset is negative
it should be patched differently.
The 2nd bug is in the verifier:
when current state may_goto_depth is equal to visited state may_goto_depth
it means there is an actual infinite loop. It's not correct to prune
exploration of the program at this point.
Note, that this check doesn't limit the program to only one may_goto insn,
since 2nd and any further may_goto will increment may_goto_depth only
in the queued state pushed for future exploration. The current state
will have may_goto_depth == 0 regardless of number of may_goto insns
and the verifier has to explore the program until bpf_exit.
Fixes: 011832b97b31 ("bpf: Introduce may_goto instruction")
Reported-by: Zac Ecob <zacecob@protonmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Closes: https://lore.kernel.org/bpf/CAADnVQL-15aNp04-cyHRn47Yv61NXfYyhopyZtUyxNojUZUXpA@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20240619235355.85031-1-alexei.starovoitov@gmail.com
|
|
Add test coverage for reservations beyond the ring buffer size in order
to validate that bpf_ringbuf_reserve() rejects the request with NULL, all
other ring buffer tests keep passing as well:
# ./vmtest.sh -- ./test_progs -t ringbuf
[...]
./test_progs -t ringbuf
[ 1.165434] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.165825] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
[ 1.284001] tsc: Refined TSC clocksource calibration: 3407.982 MHz
[ 1.286871] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc34e357, max_idle_ns: 440795379773 ns
[ 1.289555] clocksource: Switched to clocksource tsc
#274/1 ringbuf/ringbuf:OK
#274/2 ringbuf/ringbuf_n:OK
#274/3 ringbuf/ringbuf_map_key:OK
#274/4 ringbuf/ringbuf_write:OK
#274 ringbuf:OK
#275 ringbuf_multi:OK
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
[ Test fixups for getting BPF CI back to work ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240621140828.18238-2-daniel@iogearbox.net
|
|
Commit 243996d172a6 ("dt-bindings: net: Convert fsl-fman to yaml") splits
the previous dt text file into four yaml files. It adjusts a corresponding
file entry in MAINTAINERS from txt to yaml, but this adjustment misses
that the file was split and renamed.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Adjust the file entry to match the four yaml files resulting from this
commit above.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid spurious link status logs that may ultimately be wrong; for example,
if the link is set to down with the cable plugged, then the cable is
unplugged and after this the link is set to up, the last new log that is
appearing is incorrectly telling that the link is up.
In order to avoid errors, show link status logs after link_reset
processing, and in order to avoid spurious as much as possible, only show
the link loss when some link status change is detected.
cc: stable@vger.kernel.org
Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Fix unintended sign extension and klockwork issues. These are not real
issue but for sanity checks.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The core gains placeholders for recently added functions when
CONFIG_I2C is not defined as well documentation fixes to start using
inclusive terminology.
The drivers get paths in DT bindings fixed as well as proper interrupt
handling for the ocores driver"
* tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
docs: i2c: summary: be clearer with 'controller/target' and 'adapter/client' pairs
docs: i2c: summary: document 'local' and 'remote' targets
docs: i2c: summary: document use of inclusive language
docs: i2c: summary: update speed mode description
docs: i2c: summary: update I2C specification link
docs: i2c: summary: start sentences consistently.
i2c: Add nop fwnode operations
i2c: ocores: set IACK bit after core is enabled
dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema
dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema
|
|
Pull smb client fixes from Steve French:
"Five smb3 client fixes
- three nets/fiolios cifs fixes
- fix typo in module parameters description
- fix incorrect swap warning"
* tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Move the 'pid' from the subreq to the req
cifs: Only pick a channel once per read request
cifs: Defer read completion
cifs: fix typo in module parameter enable_gcm_256
cifs: drop the incorrect assertion in cifs_swap_rw()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix fragility in checks for unset node ID.
Use numa_valid_node() function to verify that nid is a valid node
ID instead of inconsistent comparisons with either NUMA_NO_NODE or
MAX_NUMNODES"
* tag 'fixes-2024-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: use numa_valid_node() helper to check for invalid node ID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix lseek in o32 compat mode
- fix for microMIPS MT ASE helpers
* tag 'mips-fixes_6.10_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: fix compat_sys_lseek syscall
MIPS: mipsmtregs: Fix target register for MFTC0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- An ARM-relevant fix to not free default RMIDs of a resource control
group
- A randconfig build fix for the VMware virtual GPU driver
* tag 'x86_urgent_for_v6.10_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Don't try to free nonexistent RMIDs
drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Prevent use-after-free in 64-bit KVM VFIO
- Add generated Power8 crypto asm to .gitignore
Thanks to Al Viro and Nathan Lynch.
* tag 'powerpc-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group()
powerpc/crypto: Add generated P8 asm to .gitignore
|
|
TC queues needs to be correctly updated when the number of queues on
a VSI is reconfigured, so netdev's queue and TC settings will be
dynamically adjusted and could accurately represent the underlying
hardware state after changes to the VSI queue counts.
Fixes: 0754d65bd4be ("ice: Add infrastructure for mqprio support via ndo_setup_tc")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IEEE1588(ptp) is optional feature for network. Remove it from required
list to fix below CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: ethernet@f0000: 'ptp-timer' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: prepare representor for SF support
Michal Swiatkowski says:
This is a series to prepare port representor for supporting also
subfunctions. We need correct devlink locking and the possibility to
update parent VSI after port representor is created.
Refactor how devlink lock is taken to suite the subfunction use case.
VSI configuration needs to be done after port representor is created.
Port representor needs only allocated VSI. It doesn't need to be
configured before.
VSI needs to be reconfigured when update function is called.
The code for this patchset was split from (too big) patchset [1].
[1] https://lore.kernel.org/netdev/20240213072724.77275-1-michal.swiatkowski@linux.intel.com/
---
Originally from https://lore.kernel.org/netdev/20240605-next-2024-06-03-intel-next-batch-v2-0-39c23963fa78@intel.com/
Changes:
- delete ice_repr_get_by_vsi() from header
- rephrase commit message in moving devlink locking
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enguerrand de Ribaucourt says:
====================
Handle new Microchip KSZ 9897 Errata
These patches implement some suggested workarounds from the Microchip KSZ 9897
Errata [1].
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897R-Errata-DS80000758.pdf
---
v7:
- use dev_crit_once instead of dev_crit_ratelimited
- add a comment to help users understand the consequences of half-duplex errors
v6: https://lore.kernel.org/netdev/20240614094642.122464-1-enguerrand.de-ribaucourt@savoirfairelinux.com/
- remove KSZ9897 phy_id workaround (was a configuration issue)
- use macros for checking link down in monitoring function
- check if VLAN is enabled before monitoring resources
v5: https://lore.kernel.org/all/20240604092304.314636-1-enguerrand.de-ribaucourt@savoirfairelinux.com/
- use macros for bitfields
- rewrap comments
- check ksz_pread* return values
- fix spelling mistakes
- remove KSZ9477 suspend/resume deletion patch
v4: https://lore.kernel.org/all/20240531142430.678198-1-enguerrand.de-ribaucourt@savoirfairelinux.com/
- Rebase on net/main
- Add Fixes: tags to the patches
- reverse x-mas tree order
- use pseudo phy_id instead of match_phy_device
v3: https://lore.kernel.org/all/20240530102436.226189-1-enguerrand.de-ribaucourt@savoirfairelinux.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The errata DS80000754 recommends monitoring potential faults in
half-duplex mode for the KSZ9477 family.
half-duplex is not very common so I just added a critical message
when the fault conditions are detected. The switch can be expected
to be unable to communicate anymore in these states and a software
reset of the switch would be required which I did not implement.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Errata DS80000758 states that carrier sense back pressure mode can cause
link down issues in 100BASE-TX half duplex mode. The datasheet also
recommends to always use the collision based back pressure mode.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Woojung Huh <Woojung.huh@microchip.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PHY_ID_KSZ9477 was supported but not added to the device table passed to
MODULE_DEVICE_TABLE.
Fixes: fc3973a1fa09 ("phy: micrel: add Microchip KSZ 9477 Switch PHY support")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Not all PSE attributes are used for the pse-set netlink command.
Select only the ones used by ethtool.
Fixes: f8586411e40e ("netlink: specs: Expand the pse netlink command with PoE interface")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This pull request fixes the paths of the dt-schema to their
complete locations for the ChromeOS EC tunnel driver and the
Atmel at91sam drivers.
Additionally, the OpenCores driver receives a fix for an issue
that dates back to version 2.6.18. Specifically, the interrupts
need to be acknowledged (clearing all pending interrupts) after
enabling the core.
|
|
Pull rust fix from Miguel Ojeda:
- Avoid unused import warning in 'rusttest'.
* tag 'rust-fixes-6.10' of https://github.com/Rust-for-Linux/linux:
rust: avoid unused import warning in `rusttest`
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver specific fixes for incorrect device descriptions, plus a
fix for a missing symbol export which causes build failures for some
newly added drivers in other trees"
* tag 'regulator-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones
regulator: bd71815: fix ramp values
regulator: core: Fix modpost error "regulator_get_regmap" undefined
regulator: tps6594-regulator: Fix the number of irqs for TPS65224 and TPS6594
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A number of fixes that have built up for SPI, a bunch of driver
specific ones including an unfortunate revert of an optimisation for
the i.MX driver which was causing issues with some configurations,
plus a couple of core fixes for the rarely used octal mode and for a
bad interaction between multi-CS support and target mode"
* tag 'spi-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-imx: imx51: revert burst length calculation back to bits_per_word
spi: Fix SPI slave probe failure
spi: Fix OCTAL mode support
spi: stm32: qspi: Clamp stm32_qspi_get_mode() output to CCR_BUSWIDTH_4
spi: stm32: qspi: Fix dual flash mode sanity test in stm32_qspi_setup()
spi: cs42l43: Drop cs35l56 SPI speed down to 11MHz
spi: cs42l43: Correct SPI root clock speed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix crashes triggered by administrative operations on the server
* tag 'nfsd-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: grab nfsd_mutex in nfsd_nl_rpc_status_get_dumpit()
nfsd: fix oops when reading pool_stats before server is started
|
|
Pull xfs fix from Chandan Babu:
- Fix assertion failure due to a race between unlink and cluster buffer
instantiation.
* tag 'xfs-6.10-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix unlink vs cluster buffer instantiation race
|
|
Pull bcachefs fixes from Kent Overstreet:
"Lots of (mostly boring) fixes for syzbot bugs and rare(r) CI bugs.
The LRU_TIME_BITS fix was slightly more involved; we only have 48 bits
for the LRU position (we would prefer 64), so wraparound is possible
for the cached data LRUs on a filesystem that has done sufficient
(petabytes) reads; this is now handled.
One notable user reported bugfix, where we were forgetting to
correctly set the bucket data type, which should have been
BCH_DATA_need_gc_gens instead of BCH_DATA_free; this was causing us to
go emergency read-only on a filesystem that had seen heavy enough use
to see bucket gen wraparoud.
We're now starting to fix simple (safe) errors without requiring user
intervention - i.e. a small incremental step towards full self
healing.
This is currently limited to just certain allocation information
counters, and the error is still logged in the superblock; see that
patch for more information. ("bcachefs: Fix safe errors by default")"
* tag 'bcachefs-2024-06-22' of https://evilpiepirate.org/git/bcachefs: (22 commits)
bcachefs: Move the ei_flags setting to after initialization
bcachefs: Fix a UAF after write_super()
bcachefs: Use bch2_print_string_as_lines for long err
bcachefs: Fix I_NEW warning in race path in bch2_inode_insert()
bcachefs: Replace bare EEXIST with private error codes
bcachefs: Fix missing alloc_data_type_set()
closures: Change BUG_ON() to WARN_ON()
bcachefs: fix alignment of VMA for memory mapped files on THP
bcachefs: Fix safe errors by default
bcachefs: Fix bch2_trans_put()
bcachefs: set_worker_desc() for delete_dead_snapshots
bcachefs: Fix bch2_sb_downgrade_update()
bcachefs: Handle cached data LRU wraparound
bcachefs: Guard against overflowing LRU_TIME_BITS
bcachefs: delete_dead_snapshots() doesn't need to go RW
bcachefs: Fix early init error path in journal code
bcachefs: Check for invalid btree IDs
bcachefs: Fix btree ID bitmasks
bcachefs: Fix shift overflow in read_one_super()
bcachefs: Fix a locking bug in the do_discard_fast() path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- We currently enable DIPM (device initiated power management) in the
device (using a SET FEATURES call to the device), regardless if the
HBA supports any LPM states or not. It seems counter intuitive, and
potentially dangerous to enable a device side feature, when the HBA
does not have the corresponding support. Thus, make sure that we do
not enable DIPM if the HBA does not support any LPM states.
* tag 'ata-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Do not enable LPM if no LPM states are supported by the HBA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Three fixes for the pwm-stm32 driver.
The first patch prevents an integer wrap-around for small periods. In
the second patch the calculation of the prescaler is fixed which
resulted in values for the ARR register that don't fit into the
corresponding register bit field. The last commit improves an error
message that was wrongly copied from another error path"
* tag 'pwm/for-6.10-rc5-fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Fix error message to not describe the previous error path
pwm: stm32: Fix calculation of prescaler
pwm: stm32: Refuse too small period requests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are seven oneline patches that each address a distinct problem
on the NXP i.MX platform, mostly the popular i.MX8M variant.
The only other two fixes are for error handling on the psci firmware
driver and SD card support on the milkv duo riscv board"
* tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: psci: Fix return value from psci_system_suspend()
riscv: dts: sophgo: disable write-protection for milkv duo
arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
arm64: dts: freescale: imx8mm-verdin: Fix GPU speed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some hw breakpoint fixes, an objtool build warnging fix, and a trivial
cleanup"
* tag 'loongarch-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Remove an unneeded semicolon
LoongArch: Fix multiple hardware watchpoint issues
LoongArch: Trigger user-space watchpoints correctly
LoongArch: Fix watchpoint setting error
LoongArch: Only allow OBJTOOL & ORC unwinder if toolchain supports -mthin-add-sub
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
- Allow getting/setting MSRs for SEV-ES guests, if they're using the
pre-6.9 KVM_SEV_ES_INIT API.
- Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old
routing table requested that.
Generic:
- Avoid __fls(0)
- Fix reference leak on hwpoisoned page
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are
atomic.
- Fix bug in __kvm_handle_hva_range() where KVM calls a function
pointer that was intended to be a marker only (nothing bad happens
but kind of a mine and also technically undefined behavior)
- Do not bother accounting allocations that are small and freed
before getting back to userspace.
Selftests:
- Fix compilation for RISC-V.
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using
GuestMaxPhyAddr from KVM's supported CPUID (if it's available)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
KVM: Discard zero mask with function kvm_dirty_ring_reset
virt: guest_memfd: fix reference leak on hwpoisoned page
kvm: do not account temporary allocations to kmem
MAINTAINERS: Drop Wanpeng Li as a Reviewer for KVM Paravirt support
KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
KVM: Stop processing *all* memslots when "null" mmu_notifier handler is found
KVM: arm64: FFA: Release hyp rx buffer
KVM: selftests: Fix RISC-V compilation
KVM: arm64: Disassociate vcpus from redistributor region on teardown
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits
|
|
"Failed to lock the clock" is an appropriate error message for
clk_rate_exclusive_get() failing, but not for the clock running too
fast for the driver's calculations.
Adapt the error message accordingly.
Fixes: d44d635635a7 ("pwm: stm32: Fix for settings using period > UINT32_MAX")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/285182163211203fc823a65b180761f46e828dcb.1718979150.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
A small prescaler is beneficial, as this improves the resolution of the
duty_cycle configuration. However if the prescaler is too small, the
maximal possible period becomes considerably smaller than the requested
value.
One situation where this goes wrong is the following: With a parent
clock rate of 208877930 Hz and max_arr = 0xffff = 65535, a request for
period = 941243 ns currently results in PSC = 1. The value for ARR is
then calculated to
ARR = 941243 * 208877930 / (1000000000 * 2) - 1 = 98301
This value is bigger than 65535 however and so doesn't fit into the
respective register field. In this particular case the PWM was
configured for a period of 313733.4806027616 ns (with ARR = 98301 &
0xffff). Even if ARR was configured to its maximal value, only period =
627495.6861167669 ns would be achievable.
Fix the calculation accordingly and adapt the comment to match the new
algorithm.
With the calculation fixed the above case results in PSC = 2 and so an
actual period of 941229.1667195285 ns.
Fixes: 8002fbeef1e4 ("pwm: stm32: Calculate prescaler with a division instead of a loop")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/b4d96b79917617434a540df45f20cb5de4142f88.1718979150.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
We support multicast addresses, so enable it by default.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are 2 types of outstanding tx skb's:
Type 1: Packets that are sitting in the drivers ind_buff that are
waiting to be batch sent to the NIC. During a device reset, these are
freed with a call to ibmvnic_tx_scrq_clean_buffer()
Type 2: Packets that have been sent to the NIC and are awaiting a TX
completion IRQ. These are free'd during a reset with a call to
clean_tx_pools()
During any reset which requires us to free the tx irq, ensure that the
Type 2 skb references are freed. Since the irq is released, it is
impossible for the NIC to inform of any completions.
Furthermore, later in the reset process is a call to init_tx_pools()
which marks every entry in the tx pool as free (ie not outstanding).
So if the driver is to make a call to init_tx_pools(), it must first
be sure that the tx pool is empty of skb references.
This issue was discovered by observing the following in the logs during
EEH testing:
TX free map points to untracked skb (tso_pool 0 idx=4)
TX free map points to untracked skb (tso_pool 0 idx=5)
TX free map points to untracked skb (tso_pool 1 idx=36)
Fixes: 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pairs
This not only includes rewording, but also where to put which emphasis
on terms in this document.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Because Linux can be a target as well, add terminology to differentiate
between Linux being the target and Linux accessing targets.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
We now have the updated I2C specs and our own Code of Conduct, so we
have all we need to switch over to the inclusive terminology. Define
them here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Fastest I2C mode is 5 MHz. Update the docs and reword the paragraph
slightly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Luckily, the specs are directly downloadable again, so update the link.
Also update its title to the original name "I²C".
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Change the first paragraphs to contain only one space after the end of
the previous sentence like in the rest of the document.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Don't accept TT entries for out-of-spec VIDs, by Sven Eckelmann
- Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only
callbacks", by Linus Lüssing
* tag 'batadv-net-pullrequest-20240621' of git://git.open-mesh.org/linux-merge:
Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only callbacks"
batman-adv: Don't accept TT entries for out-of-spec VIDs
====================
Link: https://patch.msgid.link/20240621143915.49137-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-06-21
The first patch is by Oleksij Rempel, it enhances the error handling
for tightly received RTS message in the j1939 protocol.
Shigeru Yoshida's patch fixes a kernel information leak in
j1939_send_one() in the j1939 protocol.
Followed by a patch by Oleksij Rempel for the j1939 protocol, to
properly recover from a CAN bus error during BAM transmission.
A patch by Chen Ni properly propagates errors in the kvaser_usb
driver.
The last patch is by Vitor Soares, that fixes an infinite loop in the
mcp251xfd driver is SPI async sending fails during xmit.
* tag 'linux-can-fixes-for-6.10-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: fix infinite loop when xmit fails
can: kvaser_usb: fix return value for hif_usb_send_regout
net: can: j1939: recover socket queue on CAN bus error during BAM transmission
net: can: j1939: Initialize unused data in j1939_send_one()
net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
====================
Link: https://patch.msgid.link/20240621121739.434355-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-06-21
The first 2 patches are by Andy Shevchenko, one cleans up the includes
in the mcp251x driver, the other one updates the sja100 plx_pci driver
to make use of predefines PCI subvendor ID.
Mans Rullgard's patch cleans up the Kconfig help text of for the slcan
driver.
Oliver Hartkopp provides a patch to update the documentation, which
removes the ISO 15675-2 specification version where possible.
The next 2 patches are by Harini T and update the documentation of the
xilinx_can driver.
Francesco Valla provides documentation for the ISO 15765-2 protocol.
A patch by Dr. David Alan Gilbert removes an unused struct from the
mscan driver.
12 patches are by Martin Jocic. The first three add support for 3 new
devices to the kvaser_usb driver. The remaining 9 first clean up the
kvaser_pciefd driver, and then add support for MSI.
Krzysztof Kozlowski contributes 3 patches simplifies the CAN SPI
drivers by making use of spi_get_device_match_data().
The last patch is by Martin Hundebøll, which reworks the m_can driver
to not enable the CAN transceiver during probe.
* tag 'linux-can-next-for-6.11-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (24 commits)
can: m_can: don't enable transceiver when probing
can: mcp251xfd: simplify with spi_get_device_match_data()
can: mcp251x: simplify with spi_get_device_match_data()
can: hi311x: simplify with spi_get_device_match_data()
can: kvaser_pciefd: Add MSI interrupts
can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR
can: kvaser_pciefd: Change name of return code variable
can: kvaser_pciefd: Rename board_irq to pci_irq
can: kvaser_pciefd: Add unlikely
can: kvaser_pciefd: Add inline
can: kvaser_pciefd: Remove unnecessary comment
can: kvaser_pciefd: Skip redundant NULL pointer check in ISR
can: kvaser_pciefd: Group #defines together
can: kvaser_usb: Add support for Kvaser Mini PCIe 1xCAN
can: kvaser_usb: Add support for Kvaser USBcan Pro 5xCAN
can: kvaser_usb: Add support for Vining 800
can: mscan: remove unused struct 'mscan_state'
Documentation: networking: document ISO 15765-2
can: xilinx_can: Document driver description to list all supported IPs
can: isotp: remove ISO 15675-2 specification version where possible
...
====================
Link: https://patch.msgid.link/20240621080201.305471-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure the inner IP header is part of the skb's linear data before
setting old_iph. Otherwise, on a non-linear skb, old_iph could point
outside of the packet data.
Unlike classical VXLAN, which always encapsulates Ethernet packets,
VXLAN-GPE can transport IP packets directly. In that case, we need to
look at skb->protocol to figure out if an Ethernet header is present.
Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/2aa75f6fa62ac9dbe4f16ad5ba75dd04a51d4b99.1718804000.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fixes: one in the ufs driver fixing an obvious memory leak and the
other (with a core flag based update) trying to prevent USB crashes by
stopping the core from issuing a request for the I/O Hints mode page"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: usb: uas: Do not query the IO Advice Hints Grouping mode page for USB/UAS devices
scsi: core: Introduce the BLIST_SKIP_IO_HINTS flag
scsi: ufs: core: Free memory allocated for model before reinit
|
|
Pull drm fixes from Dave Airlie:
"Still pretty quiet, two weeks worth of amdgpu fixes, with one i915 and
one xe. I didn't get the drm-misc-fixes tree PR this week, but there
was only one fix queued and I think it can wait another week, so seems
pretty normal.
xe:
- Fix for invalid register access
i915:
- Fix conditions for joiner usage, it's not possible with eDP MSO
amdgpu:
- Fix display idle optimization race
- Fix GPUVM TLB flush locking scope
- IPS fix
- GFX 9.4.3 harvesting fix
- Runtime pm fix for shared buffers
- DCN 3.5.x fixes
- USB4 fix
- RISC-V clang fix
- Silence UBSAN warnings
- MES11 fix
- PSP 14.0.x fix"
* tag 'drm-fixes-2024-06-22' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/vf: Don't touch GuC irq registers if using memory irqs
drm/amdgpu: init TA fw for psp v14
drm/amdgpu: cleanup MES11 command submission
drm/amdgpu: fix UBSAN warning in kv_dpm.c
drm/radeon: fix UBSAN warning in kv_dpm.c
drm/amd/display: Disable CONFIG_DRM_AMD_DC_FP for RISC-V with clang
drm/amd/display: Attempt to avoid empty TUs when endpoint is DPIA
drm/amd/display: change dram_clock_latency to 34us for dcn35
drm/amd/display: Change dram_clock_latency to 34us for dcn351
drm/amdgpu: revert "take runtime pm reference when we attach a buffer" v2
drm/amdgpu: Indicate CU havest info to CP
drm/amd/display: prevent register access while in IPS
drm/amdgpu: fix locking scope when flushing tlb
drm/amd/display: Remove redundant idle optimization check
drm/i915/mso: using joiner is not possible with eDP MSO
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two bugs, one originating in this cycle and one from 6.6"
* tag 'ovl-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: fix encoding fid for lower only root
ovl: fix copy-up in tmpfile
|
