summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-13net: prestera: add support for port range filtersMaksym Glubokiy
This adds support for port-range rules: $ tc qdisc add ... clsact $ tc filter add ... flower ... src_port <PMIN>-<PMAX> ... Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13net: extract port range fields from fl_flow_keyMaksym Glubokiy
So it can be used for port range filter offloading. Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13Merge branch 'prestera-mdb-offload'David S. Miller
Oleksandr Mazur says: ==================== net: marvell: prestera: add MDB offloading support This patch series adds support for the MDB handling for the marvell Prestera Driver. It's used to propagate IGMP groups registered within the Kernel to the underlying HW (offload registered groups). Features: - define (and implement) main internal MDB-related objects; - define (and implement) main HW APIs for MDB handling; - add MDB handling support for both regular ports as well as Bond interfaces; - Mirrored behavior of Bridge driver upon multicast router appearance (all traffic flooded when there's no mcast router; mcast router receives all mcast traffic, and only group-specific registered mcast traffic is being received by ports who've explicitly joined any group when there's a registered mcast router); - Reworked prestera driver bridge flags (especially multicast) setting - thus making it possible to react over mcast disabled messages properly by offloading this state to the underlying HW (disabling multicast flooding); Limitations: - Not full (partial) IGMPv3 support (due to limited switchdev notification capabilities: MDB events are being propagated only with a single MAC entry, while IGMPv3 has Group-Specific requests and responses); - It's possible that multiple IP groups would receive traffic from other groups, as MDB events are being propagated with a single MAC entry, which makes it possible to map a few IPs over same MAC; Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> PATCH V5: - fix checkpatch errors (4/4). - remove function forward declarations, and move function implementations to match the removed forward declarations (4/4). - rebased changes on top of latest master. PATCH V4: - fix clang warning - var uninitialized when used. PATCH V3: - add missing function implementations to 2/4 (HW API implementation), only definitions were added int V1, V2, and implementation waas missed by mistake. Reported-by: kernel test robot <lkp@intel.com> - fix compiletime warning (unused variable) PATCH V2: - include all the patches of patch series (V1's been sent to closed net-next, also had not all patches included); ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13net: marvell: prestera: implement software MDB entries allocationOleksandr Mazur
Define bridge MDB entry (software entry): - entry that get's created upon receiving MDB management events (create/delete), that inherently defines a software entry, which can be enabled (offloaded to the HW) or disabled (removed from HW). This separation is done to achieve a better highlevel management of HW resources - software MDB entry could exist, while it's not necessarily should be configured on the HW. For example: by default, the Linux behavior would not replicate multicast traffic to multicast group members if there's no active multicast router and thus - no actual multicast traffic can be received/sent. So, until multicast router appears on the system no HW configuration should be applied, although SW MDB entries should be tracked. Another example would be altering state of 'multicast enabled' on the bridge: MC_DISABLED should invoke disabling / clearing multicast groups of specified bridge on the HW, yet upon receiving 'multicast enabled' event, driver should reconfigure any existing software MDB groups on the HW. Keeping track of software MDB entries in such way makes it possible to properly react on such events. Define bridge MDB port entry (software entry): - entry that helps keeping track (on software - driver - level) of which bridge mebemer interface joined any give MDB group; Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13net: marvell: prestera: define and implement MDB / flood domain API for ↵Oleksandr Mazur
entries creation and deletion Define and implement prestera API calls for managing MDB and flood domain (ports) entries (create / delete / find calls). Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13net: marvell: prestera: define MDB/flood domain entries and HW API to ↵Oleksandr Mazur
offload them to the HW Define MDB entry that can be offloaded: - FDB entry, that defines an multicast group to which traffic can be replicated to; Define flood domain: - Arrangement of ports (list), that have joined multicast group, which would receive and replicate to multicast traffic of specified group; Define flood domain port: - single flood domain list entry, that is associated with any given bridge port interface (could be LAG interface or physical port-member). Applicable to both Q and D bridges; Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13net: marvell: prestera: rework bridge flags settingOleksandr Mazur
Separate flags to make it possible to alter them separately; Move bridge flags setting logic from HW API level to prestera_main where it belongs; Move bridge flags parsing (and setting using prestera API) to prestera_switchdev.c - module responsible for bridge operations handling; Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13ip6_tunnel: allow to inherit from VLAN encapsulated IPMatthias May
The current code allows to inherit the TTL (hop_limit) from the payload when skb->protocol is ETH_P_IP or ETH_P_IPV6. However when the payload is VLAN encapsulated (e.g because the tunnel is of type GRETAP), then this inheriting does not work, because the visible skb->protocol is of type ETH_P_8021Q or ETH_P_8021AD. Instead of skb->protocol, use skb_protocol(). Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13ip6_gre: use actual protocol to select xmitMatthias May
When the payload is a VLAN encapsulated IPv6/IPv6 frame, we can skip the 802.1q/802.1ad ethertypes and jump to the actual protocol. This way we treat IPv4/IPv6 frames as IP instead of as "other". Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13ip6_gre: set DSCP for non-IPMatthias May
The current code always forces a dscp of 0 for all non-IP frames. However when setting a specific TOS with the command ip link add name tep0 type ip6gretap local fdd1:ced0:5d88:3fce::1 remote fdd1:ced0:5d88:3fce::2 tos 0xa0 one would expect all GRE encapsulated frames to have a TOS of 0xA0. and not only when the payload is IPv4/IPv6. Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13ip_tunnel: allow to inherit from VLAN encapsulated IPMatthias May
The current code allows to inherit the TOS, TTL, DF from the payload when skb->protocol is ETH_P_IP or ETH_P_IPV6. However when the payload is VLAN encapsulated (e.g because the tunnel is of type GRETAP), then this inheriting does not work, because the visible skb->protocol is of type ETH_P_8021Q or ETH_P_8021AD. Instead of skb->protocol, use skb_protocol(). Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptopMeng Tang
The headset on this machine is not defined, after applying the quirk ALC256_FIXUP_ASUS_HEADSET_MIC, the headset-mic works well Signed-off-by: Meng Tang <tangmeng@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220713094133.9894-1-tangmeng@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-13ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221Meng Tang
On a HP 288 Pro G2 MT (X9W02AV), the front mic could not be detected. In order to get it working, the pin configuration needs to be set correctly, and the ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE fixup needs to be applied. Signed-off-by: Meng Tang <tangmeng@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220713063332.30095-1-tangmeng@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-13ALSA: hda/realtek: fix mute/micmute LEDs for HP machinesJeremy Szu
The HP ProBook 440/450 G9 and EliteBook 640/650 G9 have multiple motherboard design and they are using different subsystem ID of audio codec. Add the same quirk for other MBs. Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220713022706.22892-1-jeremy.szu@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-12qlogic: qed: fix clang -Wformat warningsJustin Stitt
When building with Clang we encounter these warnings: | drivers/net/ethernet/qlogic/qed/qed_dev.c:416:30: error: format | specifies type 'char' but the argument has type 'u32' (aka 'unsigned | int') [-Werror,-Wformat] i); - | drivers/net/ethernet/qlogic/qed/qed_dev.c:630:13: error: format | specifies type 'char' but the argument has type 'int' [-Werror,-Wformat] | p_llh_info->num_ppfid - 1); For the first warning, `i` is a u32 which is much wider than the format specifier `%hhd` describes. This results in a loss of bits after 2^7. The second warning involves implicit integer promotion as the resulting type of addition cannot be smaller than an int. example: `` uint8_t a = 4, b = 7; int size = sizeof(a + b - 1); printf("%d\n", size); // output: 4 ``` See more: (https://wiki.sei.cmu.edu/confluence/display/c/INT02-C.+Understand+integer+conversion+rules) "Integer types smaller than int are promoted when an operation is performed on them. If all values of the original type can be represented as an int, the value of the smaller type is converted to an int; otherwise, it is converted to an unsigned int." Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Justin Stitt <justinstitt@google.com> Link: https://lore.kernel.org/r/20220711232404.2189257-1-justinstitt@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12Merge branch 'bnxt_en-5-bug-fixes'Jakub Kicinski
Michael Chan says: ==================== bnxt_en: 5 Bug fixes This patchset fixes various issues, including SRIOV error unwinding, one error recovery path, live patch reporting, XDP transmit path, and PHC clock reading. ==================== Link: https://lore.kernel.org/r/1657592778-12730-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: Fix bnxt_refclk_read()Pavan Chebbi
The upper 32-bit PHC register is not latched when reading the lower 32-bit PHC register. Current code leaves a small window where we may not read correct higher order bits if the lower order bits are just about to wrap around. This patch fixes this by reading higher order bits twice and makes sure that final value is correctly paired with its lower 32 bits. Fixes: 30e96f487f64 ("bnxt_en: Do not read the PTP PHC during chip reset") Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: Fix and simplify XDP transmit pathMichael Chan
Fix the missing length hint in the TX BD for the XDP transmit path. The length hint is required on legacy chips. Also, simplify the code by eliminating the first_buf local variable. tx_buf contains the same value. The opaque value only needs to be set on the first BD. Fix this also for correctness. Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: fix livepatch queryVikas Gupta
In the livepatch query fw_target BNXT_FW_SRT_PATCH is applicable for P5 chips only. Fixes: 3c4153394e2c ("bnxt_en: implement firmware live patching") Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: Fix bnxt_reinit_after_abort() code pathMichael Chan
bnxt_reinit_after_abort() is called during ifup when a previous FW reset sequence has aborted or a previous ifup has failed after detecting FW reset. In all cases, it is safe to assume that a previous FW reset has completed and the driver may not have fully reinitialized. Prior to this patch, it is assumed that the FUNC_DRV_IF_CHANGE_RESP_FLAGS_HOT_FW_RESET_DONE flag will always be set by the firmware in bnxt_hwrm_if_change(). This may not be true if the driver has already attempted to register with the firmware. The firmware may not set the RESET_DONE flag again after the driver has registered, assuming that the driver has seen the flag already. Fix it to always go through the FW reset initialization path if the BNXT_STATE_FW_RESET_DET flag is set. This flag is always set by the driver after successfully going through bnxt_reinit_after_abort(). Fixes: 6882c36cf82e ("bnxt_en: attempt to reinitialize after aborted reset") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: reclaim max resources if sriov enable failsKashyap Desai
If bnxt_sriov_enable() fails after some resources have been reserved for the VFs, the current code is not unwinding properly and the reserved resources become unavailable afterwards. Fix it by properly unwinding with a call to bnxt_hwrm_func_qcaps() to reset all maximum resources. Also, add the missing bnxt_ulp_sriov_cfg() call to let the RDMA driver know to abort. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12igb: add xdp frags support to ndo_xdp_xmitLorenzo Bianconi
Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit callback. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220711230751.3124415-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12Merge branch 'mptcp-support-changes-to-initial-subflow-priority'Jakub Kicinski
Mat Martineau says: ==================== mptcp: Support changes to initial subflow priority This series updates the in-kernel MPTCP path manager to allow changes to subflow priority for the first subflow created for each MPTCP connection (the one created with the MP_CAPABLE handshake). Patches 1 and 2 do some refactoring to simplify the new functionality. Patch 3 introduces the new feature to change the initial subflow priority and send the MP_PRIO header on that subflow. Patch 4 cleans up code related to tracking endpoint ids on the initial subflow. Patch 5 adds a selftest to confirm that subflow priorities are updated as expected. ==================== Link: https://lore.kernel.org/r/20220711191633.80826-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12selftests: mptcp: add MPC backup testsPaolo Abeni
Add a couple of test-cases covering the newly introduced features - priority update for the MPC subflow. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12mptcp: more accurate MPC endpoint trackingPaolo Abeni
Currently the id accounting for the ID 0 subflow is not correct: at creation time we mark (correctly) as unavailable the endpoint id corresponding the MPC subflow source address, while at subflow removal time set as available the id 0. With this change we track explicitly the endpoint id corresponding to the MPC subflow so that we can mark it as available at removal time. Additionally this allow deleting the initial subflow via the NL PM specifying the corresponding endpoint id. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12mptcp: allow the in kernel PM to set MPC subflow priorityPaolo Abeni
Any local endpoints configured on the address matching the MPC subflow are currently ignored. Specifically, setting a backup flag on them has no effect on the first subflow, as the MPC handshake can't carry such info. This change refactors the MPC endpoint id accounting to additionally fetch the priority info from the relevant endpoint and eventually trigger the MP_PRIO handshake as needed. As a result, the MPC subflow now switches to backup priority after that the MPTCP socket is fully established, according to the local endpoint configuration. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12mptcp: address lookup improvementsPaolo Abeni
When looking-up a socket address in the endpoint list, we must prefer port-based matches over address only match. Ensure that port-based endpoints are listed first, using head insertion for them. Additionally be sure that only port-based endpoints carry a non zero port number. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12mptcp: introduce and use mptcp_pm_send_ack()Paolo Abeni
The in-kernel PM has a bit of duplicate code related to ack generation. Create a new helper factoring out the PM-specific needs and use it in a couple of places. As a bonus, mptcp_subflow_send_ack() is not used anymore outside its own compilation unit and can become static. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12net: ip_tunnel: use strscpy to replace strlcpyXueBing Chen
The strlcpy should not be used because it doesn't limit the source length. Preferred is strscpy. Signed-off-by: XueBing Chen <chenxuebing@jari.cn> Link: https://lore.kernel.org/r/2a08f6c1.e30.181ed8b49ad.Coremail.chenxuebing@jari.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12tcp: make retransmitted SKB fit into the send windowYonglong Li
current code of __tcp_retransmit_skb only check TCP_SKB_CB(skb)->seq in send window, and TCP_SKB_CB(skb)->seq_end maybe out of send window. If receiver has shrunk his window, and skb is out of new window, it should retransmit a smaller portion of the payload. test packetdrill script: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 fcntl(3, F_GETFL) = 0x2 (flags O_RDWR) +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 100 ecr 0,nop,wscale 8> +.05 < S. 0:0(0) ack 1 win 6000 <mss 1000,nop,nop,sackOK> +0 > . 1:1(0) ack 1 +0 write(3, ..., 10000) = 10000 +0 > . 1:2001(2000) ack 1 win 65535 +0 > . 2001:4001(2000) ack 1 win 65535 +0 > . 4001:6001(2000) ack 1 win 65535 +.05 < . 1:1(0) ack 4001 win 1001 and tcpdump show: 192.168.226.67.55 > 192.0.2.1.8080: Flags [.], seq 1:2001, ack 1, win 65535, length 2000 192.168.226.67.55 > 192.0.2.1.8080: Flags [.], seq 2001:4001, ack 1, win 65535, length 2000 192.168.226.67.55 > 192.0.2.1.8080: Flags [P.], seq 4001:5001, ack 1, win 65535, length 1000 192.168.226.67.55 > 192.0.2.1.8080: Flags [.], seq 5001:6001, ack 1, win 65535, length 1000 192.0.2.1.8080 > 192.168.226.67.55: Flags [.], ack 4001, win 1001, length 0 192.168.226.67.55 > 192.0.2.1.8080: Flags [.], seq 5001:6001, ack 1, win 65535, length 1000 192.168.226.67.55 > 192.0.2.1.8080: Flags [P.], seq 4001:5001, ack 1, win 65535, length 1000 when cient retract window to 1001, send window is [4001,5002], but TLP send 5001-6001 packet which is out of send window. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1657532838-20200-1-git-send-email-liyonglong@chinatelecom.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12nfp: support TX VLAN ctag insert in NFDKDiana Wang
Add support for TX VLAN ctag insert which may be configured via ethtool. e.g. # ethtool -K $DEV tx-vlan-offload on The NIC supplies VLAN insert information as packet metadata. The fields of this VLAN metadata including vlan_proto and vlan tag. Configuration control bit NFP_NET_CFG_CTRL_TXVLAN_V2 is to signal availability of ctag-insert features of the firmware. NFDK is used to communicate via PCIE to NFP-3800 based NICs while NFD3 is used for other NICs supported by the NFP driver. This features is currently implemented only for NFD3 and this patch adds support for it with NFDK. Signed-off-by: Diana Wang <na.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220711093048.1911698-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12nfp: fix clang -Wformat warningsJustin Stitt
When building with Clang we encounter these warnings: | drivers/net/ethernet/netronome/nfp/nfp_app.c:233:99: error: format | specifies type 'unsigned char' but the argument has underlying type | 'unsigned int' [-Werror,-Wformat] nfp_err(pf->cpp, "unknown FW app ID | 0x%02hhx, driver too old or support for FW not built in\n", id); - | drivers/net/ethernet/netronome/nfp/nfp_main.c:396:11: error: format | specifies type 'unsigned char' but the argument has type 'int' | [-Werror,-Wformat] serial, interface >> 8, interface & 0xff); Correct format specifier for `id` is `%x` since the default type for the `nfp_app_id` enum is `unsigned int`. The second warning is also solved by using the `%x` format specifier as the expressions involving `interface` are implicity promoted to integers (%x is used to maintain hexadecimal representation). Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220712000152.2292031-1-justinstitt@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12Merge branch 'dt-bindings-net-convert-sff-sfp-to-dtschema'Jakub Kicinski
Ioana Ciornei says: ==================== dt-bindings: net: convert sff,sfp to dtschema This patch set converts the sff,sfp to dtschema. The first patch does a somewhat mechanical conversion without changing anything else beside the format in which the dt binding is presented. In the second patch we rename some dt nodes to be generic. The last two patches change the GPIO related properties so that they uses the -gpios preferred suffix. This way, all the DTBs are passing the validation against the sff,sfp.yaml binding. ==================== Link: https://lore.kernel.org/r/20220707091437.446458-1-ioana.ciornei@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12arch: arm64: dts: marvell: rename the sfp GPIO propertiesIoana Ciornei
Rename the GPIO related sfp properties to include the preffered -gpios suffix. Also, with this change the dtb_check will no longer complain when trying to verify the DTS against the sff,sfp.yaml binding. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12arch: arm64: dts: lx2160a-clearfog-itx: rename the sfp GPIO propertiesIoana Ciornei
Rename the 'mod-def0-gpio' property to 'mod-def0-gpios' so that we use the preferred -gpios suffix. Also, with this change the dtb_check will not complain when trying to verify the DTS against the sff,sfp.yaml binding. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12dt-bindings: net: sff,sfp: rename example dt nodes to be more genericIoana Ciornei
Rename the dt nodes shown in the sff,sfp.yaml examples so that they are generic and not really tied to a specific platform. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12dt-bindings: net: convert sff,sfp to dtschemaIoana Ciornei
Convert the sff,sfp.txt bindings to the DT schema format. Also add the new path to the list of maintained files. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12Merge tag 'trace-v5.19-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Fixes and minor clean ups for tracing: - Fix memory leak by reverting what was thought to be a double free. A static tool had gave a false positive that a double free was possible in the error path, but it was actually a different location that confused the static analyzer (and those of us that reviewed it). - Move use of static buffers by ftrace_dump() to a location that can be used by kgdb's ftdump(), as it needs it for the same reasons. - Clarify in the Kconfig description that function tracing has negligible impact on x86, but may have a bit bigger impact on other architectures. - Remove unnecessary extra semicolon in trace event. - Make a local variable static that is used in the fprobes sample - Use KSYM_NAME_LEN for length of function in kprobe sample and get rid of unneeded macro for the same purpose" * tag 'trace-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: samples: Use KSYM_NAME_LEN for kprobes fprobe/samples: Make sample_probe static blk-iocost: tracing: atomic64_read(&ioc->vtime_rate) is assigned an extra semicolon ftrace: Be more specific about arch impact when function tracer is enabled tracing: Fix sleeping while atomic in kdb ftdump tracing/histograms: Fix memory leak problem
2022-07-12samples: Use KSYM_NAME_LEN for kprobesTiezhu Yang
It is better and enough to use KSYM_NAME_LEN for kprobes in samples, no need to define and use the other values. Link: https://lkml.kernel.org/r/1654651402-21552-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-12fprobe/samples: Make sample_probe staticsunliming
This symbol is not used outside of fprobe_example.c, so marks it static. Fixes the following warning: sparse warnings: (new ones prefixed by >>) >> samples/fprobe/fprobe_example.c:23:15: sparse: sparse: symbol 'sample_probe' was not declared. Should it be static? Link: https://lkml.kernel.org/r/20220606075659.674556-1-sunliming@kylinos.cn Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: sunliming <sunliming@kylinos.cn> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-12blk-iocost: tracing: atomic64_read(&ioc->vtime_rate) is assigned an extra ↵Li kunyu
semicolon Remove extra semicolon. Link: https://lkml.kernel.org/r/20220629030013.10362-1-kunyu@nfschina.com Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Li kunyu <kunyu@nfschina.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-12ftrace: Be more specific about arch impact when function tracer is enabledSteven Rostedt (Google)
It was brought up that on ARMv7, that because the FUNCTION_TRACER does not use nops to keep function tracing disabled because of the use of a link register, it does have some performance impact. The start of functions when -pg is used to compile the kernel is: push {lr} bl 8010e7c0 <__gnu_mcount_nc> When function tracing is tuned off, it becomes: push {lr} add sp, sp, #4 Which just puts the stack back to its normal location. But these two instructions at the start of every function does incur some overhead. Be more honest in the Kconfig FUNCTION_TRACER description and specify that the overhead being in the noise was x86 specific, but other architectures may vary. Link: https://lore.kernel.org/all/20220705105416.GE5208@pengutronix.de/ Link: https://lkml.kernel.org/r/20220706161231.085a83da@gandalf.local.home Reported-by: Sascha Hauer <sha@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-12tracing: Fix sleeping while atomic in kdb ftdumpDouglas Anderson
If you drop into kdb and type "ftdump" you'll get a sleeping while atomic warning from memory allocation in trace_find_next_entry(). This appears to have been caused by commit ff895103a84a ("tracing: Save off entry when peeking at next entry"), which added the allocation in that path. The problematic commit was already fixed by commit 8e99cf91b99b ("tracing: Do not allocate buffer in trace_find_next_entry() in atomic") but that fix missed the kdb case. The fix here is easy: just move the assignment of the static buffer to the place where it should have been to begin with: trace_init_global_iter(). That function is called in two places, once is right before the assignment of the static buffer added by the previous fix and once is in kdb. Note that it appears that there's a second static buffer that we need to assign that was added in commit efbbdaa22bb7 ("tracing: Show real address for trace event arguments"), so we'll move that too. Link: https://lkml.kernel.org/r/20220708170919.1.I75844e5038d9425add2ad853a608cb44bb39df40@changeid Fixes: ff895103a84a ("tracing: Save off entry when peeking at next entry") Fixes: efbbdaa22bb7 ("tracing: Show real address for trace event arguments") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-12tracing/histograms: Fix memory leak problemZheng Yejian
This reverts commit 46bbe5c671e06f070428b9be142cc4ee5cedebac. As commit 46bbe5c671e0 ("tracing: fix double free") said, the "double free" problem reported by clang static analyzer is: > In parse_var_defs() if there is a problem allocating > var_defs.expr, the earlier var_defs.name is freed. > This free is duplicated by free_var_defs() which frees > the rest of the list. However, if there is a problem allocating N-th var_defs.expr: + in parse_var_defs(), the freed 'earlier var_defs.name' is actually the N-th var_defs.name; + then in free_var_defs(), the names from 0th to (N-1)-th are freed; IF ALLOCATING PROBLEM HAPPENED HERE!!! -+ \ | 0th 1th (N-1)-th N-th V +-------------+-------------+-----+-------------+----------- var_defs: | name | expr | name | expr | ... | name | expr | name | /// +-------------+-------------+-----+-------------+----------- These two frees don't act on same name, so there was no "double free" problem before. Conversely, after that commit, we get a "memory leak" problem because the above "N-th var_defs.name" is not freed. If enable CONFIG_DEBUG_KMEMLEAK and inject a fault at where the N-th var_defs.expr allocated, then execute on shell like: $ echo 'hist:key=call_site:val=$v1,$v2:v1=bytes_req,v2=bytes_alloc' > \ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger Then kmemleak reports: unreferenced object 0xffff8fb100ef3518 (size 8): comm "bash", pid 196, jiffies 4295681690 (age 28.538s) hex dump (first 8 bytes): 76 31 00 00 b1 8f ff ff v1...... backtrace: [<0000000038fe4895>] kstrdup+0x2d/0x60 [<00000000c99c049a>] event_hist_trigger_parse+0x206f/0x20e0 [<00000000ae70d2cc>] trigger_process_regex+0xc0/0x110 [<0000000066737a4c>] event_trigger_write+0x75/0xd0 [<000000007341e40c>] vfs_write+0xbb/0x2a0 [<0000000087fde4c2>] ksys_write+0x59/0xd0 [<00000000581e9cdf>] do_syscall_64+0x3a/0x80 [<00000000cf3b065c>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Link: https://lkml.kernel.org/r/20220711014731.69520-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: 46bbe5c671e0 ("tracing: fix double free") Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-12ice: change devlink code to read NVM in blocksPaul M Stillwell Jr
When creating a snapshot of the NVM the driver needs to read the entire contents from the NVM and store it. The NVM reads are protected by a lock that is shared between the driver and the firmware. If the driver takes too long to read the entire NVM (which can happen on some systems) then the firmware could reclaim the lock and cause subsequent reads from the driver to fail. We could fix this by increasing the timeout that we pass to the firmware, but we could end up in the same situation again if the system is slow. Instead have the driver break the reading of the NVM into blocks that are small enough that we have confidence that the read will complete within the timeout time, but large enough not to cause significant AQ overhead. Fixes: dce730f17825 ("ice: add a devlink region for dumping NVM contents") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-12ice: handle E822 generic device ID in PLDM headerPaul M Stillwell Jr
The driver currently presumes that the record data in the PLDM header of the firmware image will match the device ID of the running device. This is true for E810 devices. It appears that for E822 devices that this is not guaranteed to be true. Fix this by adding a check for the generic E822 device. Fixes: d69ea414c9b4 ("ice: implement device flash update via devlink") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-12Merge tag 'ovl-fixes-5.19-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fix from Miklos Szeredi: "Add a temporary fix for posix acls on idmapped mounts introduced in this cycle. A proper fix will be added in the next cycle" * tag 'ovl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: turn off SB_POSIXACL with idmapped layers temporarily
2022-07-12Merge tag 'drm-fixes-2022-07-12' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "I see you picked up one of the fbdev fixes, this is the other stuff that was queued up last week. A bit of a scattering of fixes, three for i915, one amdgpu, and a couple of panfrost, rockchip, panel and bridge ones. amdgpu: - Hibernation fix dma-buf: - fix use after free of fence i915: - Fix a possible refcount leak in DP MST connector (Hangyu) - Fix on loading guc on ADL-N (Daniele) - Fix vm use-after-free in vma destruction (Thomas) bridge: - fsl-ldb : 3 LVDS modesetting fixes rockchip: - iommu domain fix panfrost: - fix memory corruption - error path fix panel: - orientation quirk fix for Yoga tablet 2 ssd130x: - fix pre-charge period setting" * tag 'drm-fixes-2022-07-12' of git://anongit.freedesktop.org/drm/drm: drm/ssd130x: Fix pre-charge period setting dma-buf: Fix one use-after-free of fence drm/i915: Fix vm use-after-free in vma destruction drm/i915/guc: ADL-N should use the same GuC FW as ADL-S drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector() drm/amdgpu/display: disable prefer_shadow for generic fb helpers drm/amdgpu: keep fbdev buffers pinned during suspend drm/panfrost: Fix shrinker list corruption by madvise IOCTL drm/panfrost: Put mapping instead of shmem obj on panfrost_mmu_map_fault_addr() error drm/rockchip: Detach from ARM DMA domain in attach_device drm/bridge: fsl-ldb: Drop DE signal polarity inversion drm/bridge: fsl-ldb: Enable split mode for LVDS dual link drm/bridge: fsl-ldb: Fix mode clock rate validation drm/aperture: Run fbdev removal before internal helpers drm: panel-orientation-quirks: Add quirk for the Lenovo Yoga Tablet 2 830
2022-07-12Merge tag 'x86_bugs_retbleed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull lockdep fix for x86 retbleed from Borislav Petkov: - Fix lockdep complaint for __static_call_fixup() * tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/static_call: Serialize __static_call_fixup() properly
2022-07-12cifs: remove unnecessary locking of chan_lock while freeing sessionShyam Prasad N
In cifs_put_smb_ses, when we're freeing the last ref count to the session, we need to free up each channel. At this point, it is unnecessary to take chan_lock, since we have the last reference to the ses. Picking up this lock also introduced a deadlock because it calls cifs_put_tcp_ses, which locks cifs_tcp_ses_lock. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Acked-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 06:07:02 +0000