summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-19iwlwifi: cleanup unused functionSara Sharon
iwl_has_secure_boot() isn't getting called anywhere. Clean it up. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: add queues after adding stationSara Sharon
Currently aux & broadcast queues are added before calling add station, which results with a SCD_QUEUE_CFG command sent with a station id unknown yet to fw. While this works for pre-a000 firmware, the a000 fw requires the order to be reversed. The reason the change is only for a000 devices and not for previous devices is that we cannot reverse the order since the tfd_queue_mask containing the aux queue will cause FW to assert on adding a queue mask with a queue that is not enabled. This is not a problem in a000 fw since the tfd_queue_mask was removed from the add sta API. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: read new secure boot registersSara Sharon
Addresses were changed for a000 devices. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19ath: Fix updating radar flags for coutry code IndiaMohammed Shafi Shajakhan
As per latest regulatory update for India, channel 52, 56, 60, 64 is no longer restricted to DFS. Enabling DFS/no infra flags in driver results in applying all DFS related restrictions (like doing CAC etc before this channel moves to 'available state') for these channels even though the country code is programmed as 'India' in he hardware, fix this by relaxing the frequency range while applying RADAR flags only if the country code is programmed to India. If the frequency range needs to modified based on different country code, ath_is_radar_freq can be extended/modified dynamically. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-19ath9k: add noise floor override optionSimon Wunderlich
Introduce a debugfs option to manually override the noise floor, ignoring the automatically tuned noise floor of the driver/hw. In my tests with a AR9580 based module and a tx99 5 MHz interferer, I could tune the noisefloor to -95 dBm or above to allow communication again. The automatic noise floor calibration sometimes could adapt to the situation as well, but not reliably and permanently. I would consider this "feature" experimental and interesting for people debugging the noise floor calibration or other effects of the hardware. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-19ath10k: bump up FW API to 6Ryan Hsu
For QCA6174 hw3.0, since WLAN.RM.4.4-00022-QCARMSWPZ-2, it starts to support the board ID information from otp, with some devices released on the market that didn't calibrated with OTP, will have 0 for board ID information, which cause the backward compatibility issue and was fixed in commit 'd2e202c06ca4 ("ath10k: ignore configuring the incorrect board_id")' So bump the fw api version to differentiate the latest firmware support. Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-19ath10k: fix spectral scan for QCA99X0 family of chipsetsMohammed Shafi Shajakhan
spectral_bin length (number of bins per fft sample) is usually a value where (2^n = value), n is an integer. All of the QCA99X0 family of chipsets seems to report a spectral_bin length of 2^n + 'm' bytes, where m = 4, 12 based on the chipset. This 'm' bytes seems to carry some radar related info which is currently discarded only for 'bin_len = 68' bytes. Extend this discarding of irrelevant 'bin_len' for QCA9984, QCA9888, IPQ4019 as well by introducing a hardware parameter 'spectral_bin_discard'. Also for QCA988X based family of chipsets which doesn't seem to have this issue and also for some of the hardware which I have not tested like QCA6174/QCA9377 the existing behaviour is retained as it is. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-19ath9k: Add cast to u8 to FREQ2FBIN macroMatthias Kaehlcke
The macro results are assigned to u8 variables/fields. Adding the cast fixes plenty of clang warnings about "implicit conversion from 'int' to 'u8'". Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-19ath9k: Add Dell Wireless 1601 with wowlan capabilityDamien Thébault
Add the Dell Wireless 1601 card as an AR9462 in the ath9k pci list. Note that the wowlan feature is supported and has been tested successfully. Signed-off-by: Damien Thébault <damien@dtbo.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-19ath9k: off by one in ath9k_hw_nvram_read_array()Dan Carpenter
The > should be >= or we read one space beyond the end of the array. Fixes: ab5c4f71d8c7 ("ath9k: allow to load EEPROM content via firmware API") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-19brcmfmac: only build fwsignal module for CONFIG_BRCMFMAC_PROTO_BCDCArend Van Spriel
The fwsignal module is only referenced by the bcdc module and part of the bcdc protocol. So only build it when CONFIG_BRCMFMAC_PROTO_BCDC is selected. Fixes: acf8ac41dd73 ("brcmfmac: remove reference to fwsignal data from struct brcmf_pub") Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-18Merge tag 'iwlwifi-next-for-kalle-2017-04-13' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Patches intended for v4.12: * Some small fixes here and there; * The usual cleanups and small improvements; * Work to support A000 devices continues; * New FW API version; * Some debugging improvements;
2017-04-13rt2x00: reverse external PA capability flag logicDaniel Golle
Consequently refer to external PA instead of inverting the logic and use an internal PA capability flag which is a bit confusing. Currently this is used for Rt3352 only, but MT7620A also allows for an external PA which will be supported by a follow up patch. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: avoid LPS/IPS mismatch for pnp notifyYan-Hsuan Chuang
When driver is going to sleep, it does not leave LPS/IPS, thus the BTCoex may have mismatch when driver wakes up. To avoid that, BTCoex needs to clear the IPS/LPS state when it receives a pnp notify, then it can properly set up the hw when driver wakes up. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: do not switch antenna when wifi is under 5G channelYan-Hsuan Chuang
When wifi is on a 5G channel, the 5G signal will not interfere bt 2.4G signal, and they can transmit simultaneously, hence there is no need to switch antenna between wifi and bt. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: monitor bt profiling when scanYan-Hsuan Chuang
When wifi is scanning and not connected, set the tdma and coex table properly to control the priority of the packets to make the wifi bt coexistence operate smoothly Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: consider more cases when bt inquiryYan-Hsuan Chuang
With bt inquiry, the wifi may start as a softap or the wifi and bt are busy, we take these scenarios into consider to avoid bt inquiry to degrade the performance of the network Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: move bt_disabled to global structYan-Hsuan Chuang
Move the bt disable flag to a global structure to indicate that bt is turned off. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: If wifi only, do not initiate coex mechanismYan-Hsuan Chuang
If the device has wifi mode only, there is no need to initiate the hardware for wifi and bt coexistence, so just return to avoid it. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: action when associating/authenticatingYan-Hsuan Chuang
When wifi is associating or authenticating, set the coex table for wifi to establish link. These packets should have higher priority. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: add multi port action for miracast and P2PYan-Hsuan Chuang
To support miracast and P2P, the chip may operate under concurrent mode, In this situation, do not aggregate tx packet and properly set the rx aggregation size. We detect it by monitoring the number of link established. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: set antenna control path for PTAYan-Hsuan Chuang
Set antenna control path if PTA is in control of the packet path of wifi and bt. If wifi is turned off, tell the PTA about it. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: remove setting for 2 antennasYan-Hsuan Chuang
The antenna position setting is useless for 1 antenna chip. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: mask profile bit for connect-ildeYan-Hsuan Chuang
Mask out the connect-idle bit. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: coex table setting for new fwYan-Hsuan Chuang
For newer fw, the coex table setting needs to be modified to operate correctly. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: add function to check wifi statusYan-Hsuan Chuang
This function checks if wifi has changed its statusi. It will be needed in the future. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: fw settings for softap modeYan-Hsuan Chuang
For ap mode, adjust fw settings to operate properly. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: some hi-prio pkt will cause hid_existYan-Hsuan Chuang
Clear the hid_exist flag by monitoring the packet counter. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: notify more bt informationYan-Hsuan Chuang
These bt information are displayed in display coex Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: fine tune for bt hid_a2dpYan-Hsuan Chuang
Let bt control the aggregation size to improve stability. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: fine tune for bt pan_edr_a2dpYan-Hsuan Chuang
If we don't limit the rx aggregation size, and set tdma instead, the bt profile can get more stable. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: before firmware ready settingsYan-Hsuan Chuang
Before firmware is ready, set GNT_BT to high to let bt transmit Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: power on settings for coexYan-Hsuan Chuang
When power on, the wifi could be initiating, force the antenna to transmit bt packets to avoid bt unstable problems Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: wifi is not actually off in mp modeYan-Hsuan Chuang
In mp mode, the wifi will not turn off and still has control of the PTA, so the driver needs to distinguish whether it is mp mode or not Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: need those information when scanYan-Hsuan Chuang
For scan notify, we need to supervise some registers to make sure that coexistence is operating as we expected. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: remove debugging code for 0x948Yan-Hsuan Chuang
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: treat too many low prio packets as retryYan-Hsuan Chuang
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: set coex table when wifi is idleYan-Hsuan Chuang
When wifi is idle, the bt should have more resource to transmit. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: set coex table when wifi is linkingYan-Hsuan Chuang
When wifi is under linking process, those packets are important. Mark them as high priority to protect the linking process Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: turn off antenna when rssi is too high/lowYan-Hsuan Chuang
For 2-antenna combo card, the signal of the neighbor antenna could be over noise level and cause be severe interference. So we monitor the rssi and turn off one of the antennas when the other is transmitting and the rssi level is beyond a threshold. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: turn off ps and tdma mechanism when in concurrent ↵Yan-Hsuan Chuang
mode When wifi is in concurrent mode, we can not distinguish if it is the real PS or just a fake one by sending null data, so we turn it off in case of miracast scenario. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: let bt transmit when hw initialisation doneYan-Hsuan Chuang
During hw initialisation, wifi may be ready after bt has already been ready, which causes bt to act abnormally. To avoid this, set GNT_BT to high during hw init. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Stable <stable@vger.kernel.org> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: tell fw if external or internal switch is usedYan-Hsuan Chuang
Some chips use an external antenna switch, but fw may not realize it. Here we tell fw exactly that which type of switch we are using. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: workaround for bt a2dp and hidYan-Hsuan Chuang
For a2dp and hid, we need extra process to avoid voice degradation Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: check more cases when bt is queuingYan-Hsuan Chuang
If bt is queing, we need to set the packet priority properly. Originally we only consider if wifi was connected or not, but now we also consider if bt is under abnormal scan or wifi is scanning, roaming or linking, and set the coex table. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: add pnp notidy to avoid LPS/IPS mismatchYan-Hsuan Chuang
When driver is going to sleep, it does not leave LPS/IPS, thus the BTCoex may have mismatch when driver wakes up. To avoid that, BTCoex needs to clear the IPS/LPS state when it receives a pnp notify, then it can properly set up the hw when driver wakes up. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: fix PTA unstable problem when hw initYan-Hsuan Chuang
In the hardware initialisation stage, the PTA circuits may be unstable, so we reset it after 6 secs to fix the problem. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: more cases for adjusting tdma durationYan-Hsuan Chuang
These cases are for the btcoex to tune the performance Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: detect ap num and set GNT_BT properlyYan-Hsuan Chuang
If ap num < 10, let wifi and bt transmit simultaneously, otherwise set wifi into standy when bt is transmitting Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: rename tdma_adj_type to ps_tdma_du_adj_typeYan-Hsuan Chuang
The variable is for PS tdma duration adjust, so rename it to clearly to specify its usage. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 09:09:51 +0000