| Age | Commit message (Collapse) | Author |
|---|
|
MediaTek MT7621 PCIe sub-system supports a single Root Complex (RC)
with 3 Root Ports. Add PCIe host topology ASCII graph to the binding
for completeness.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/linux-pci/20240522044321.3205160-1-sergio.paracuellos@gmail.com
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
PCIe needs to choose the appropriate performance state of RPMh power
domain based on the PCIe gen speed.
Adding the Operating Performance Points table allows to adjust power
domain performance state and ICC peak bw, depending on the PCIe data
rate and link width.
Link: https://lore.kernel.org/linux-pci/20240619-opp_support-v15-2-aa769a2173a3@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
BAR addresses
The current configuration had non-prefetchable memory overlapping with
bridge registers by 64KB from base address.
This patch fixes the 'ranges' property in the device tree by adjusting
the non-prefetchable memory addresses beyond the 64KB mark to prevent
conflicts.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240624111022.133780-1-thippesw@amd.com
Signed-off-by: Thippeswamy Havalige <thippesw@amd.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Document DT bindings for PCIe Endpoint controller found in Rockchip SoCs.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-6-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
|
|
There are two issues related to epf_ntb_epc_cleanup():
1) It should call epf_ntb_config_sspad_bar_clear()
2) The epf_ntb_bind() function should call epf_ntb_epc_cleanup()
to cleanup.
I also changed the ordering a bit. Unwinding should be done in the
mirror order from how they are allocated.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Link: https://lore.kernel.org/linux-pci/aaffbe8d-7094-4083-8146-185f4a84e8a1@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Smatch complains about inconsistent NULL checking in vpci_scan_bus():
drivers/pci/endpoint/functions/pci-epf-vntb.c:1024 vpci_scan_bus() error: we previously assumed 'vpci_bus' could be null (see line 1021)
Instead of printing an error message and then crashing we should return
an error code and clean up.
Also the NULL check is reversed so it prints an error for success
instead of failure.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Link: https://lore.kernel.org/linux-pci/68e0f6a4-fd57-45d0-945b-0876f2c8cb86@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Now that the driver core allows for struct class to be in read-only
memory, we should make all 'class' structures declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at runtime.
Link: https://lore.kernel.org/linux-pci/2024061011-citable-herbicide-1095@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
As like the 'epc_init' event, that is used to signal the EPF drivers about
the EPC initialization, let's introduce 'epc_deinit' event that is used to
signal EPC deinitialization.
The EPC deinitialization applies only when any sort of fundamental reset
is supported by the endpoint controller as per the PCIe spec.
Reference: PCIe r6.0, sec 4.2.5.9.1 and 6.6.1.
Currently, some EPC drivers like pcie-qcom-ep and pcie-tegra194 support
PERST# as the fundamental reset. So the 'deinit' event will be notified to
the EPF drivers when PERST# assert happens in the above mentioned EPC
drivers.
The EPF drivers, on receiving the event through the epc_deinit() callback
should reset the EPF state machine and also cleanup any configuration that
got affected by the fundamental reset like BAR, DMA etc...
This change also warrants skipping the cleanups in unbind() if already done
in epc_deinit().
Link: https://lore.kernel.org/r/20240606-pci-deinit-v1-2-4395534520dc@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
Keith reports a use-after-free when a DPC event occurs concurrently to
hot-removal of the same portion of the hierarchy:
The dpc_handler() awaits readiness of the secondary bus below the
Downstream Port where the DPC event occurred. To do so, it polls the
config space of the first child device on the secondary bus. If that
child device is concurrently removed, accesses to its struct pci_dev
cause the kernel to oops.
That's because pci_bridge_wait_for_secondary_bus() neglects to hold a
reference on the child device. Before v6.3, the function was only
called on resume from system sleep or on runtime resume. Holding a
reference wasn't necessary back then because the pciehp IRQ thread
could never run concurrently. (On resume from system sleep, IRQs are
not enabled until after the resume_noirq phase. And runtime resume is
always awaited before a PCI device is removed.)
However starting with v6.3, pci_bridge_wait_for_secondary_bus() is also
called on a DPC event. Commit 53b54ad074de ("PCI/DPC: Await readiness
of secondary bus after reset"), which introduced that, failed to
appreciate that pci_bridge_wait_for_secondary_bus() now needs to hold a
reference on the child device because dpc_handler() and pciehp may
indeed run concurrently. The commit was backported to v5.10+ stable
kernels, so that's the oldest one affected.
Add the missing reference acquisition.
Abridged stack trace:
BUG: unable to handle page fault for address: 00000000091400c0
CPU: 15 PID: 2464 Comm: irq/53-pcie-dpc 6.9.0
RIP: pci_bus_read_config_dword+0x17/0x50
pci_dev_wait()
pci_bridge_wait_for_secondary_bus()
dpc_reset_link()
pcie_do_recovery()
dpc_handler()
Fixes: 53b54ad074de ("PCI/DPC: Await readiness of secondary bus after reset")
Closes: https://lore.kernel.org/r/20240612181625.3604512-3-kbusch@meta.com/
Link: https://lore.kernel.org/linux-pci/8e4bcd4116fd94f592f2bf2749f168099c480ddf.1718707743.git.lukas@wunner.de
Reported-by: Keith Busch <kbusch@kernel.org>
Tested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org # v5.10+
|
|
The descriptions of the combined interrupt signals (level1) mention
all the lower interrupt signals (level2) for each combined interrupt,
regardless if the lower (level2) signal is RC or EP specific.
E.g. the description of "Combined system interrupt" includes rbar_update,
which is EP specific, and the description of "Combined message interrupt"
includes obff_idle, obff_obff, obff_cpu_active, which are all EP specific.
The only exception is the "Combined legacy interrupt", which for some
reason does not provide an exhaustive list of the lower (level2) signals.
Add the missing lower interrupt signals: tx_inta, tx_intb, tx_intc, and
tx_intd for the "Combined legacy interrupt", as per the rk3568 and rk3588
Technical Reference Manuals, such that the descriptions of the combined
interrupt signals are consistent.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-5-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Refactor the rockchip-dw-pcie binding to move generic properties to a new
rockchip-dw-pcie-common binding that can be shared by both RC and EP mode.
No functional change intended.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-4-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The DWC core has four interrupt signals: tx_inta, tx_intb, tx_intc, tx_intd
that are triggered when the PCIe controller (when running in Endpoint mode)
has sent an Assert_INTA Message to the upstream device.
Some DWC controllers have these interrupt in a combined interrupt signal.
Add the description of these interrupts to the device tree binding.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-3-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Considering that some drivers (e.g. pcie-dw-rockchip.c) already use the
interrupt-names "sys", "pmc", "msg", "err" for the device tree binding in
Root Complex mode (snps,dw-pcie.yaml), it doesn't make sense that those
drivers should use different interrupt-names when running in Endpoint mode
(snps,dw-pcie-ep.yaml).
Therefore, since "sys", "pmc", "msg", "err" are already defined in
snps,dw-pcie.yaml, add them also for snps,dw-pcie-ep.yaml.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-2-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Considering that some drivers (e.g. pcie-dw-rockchip.c) already use the
reg-name "apb" for the device tree binding in Root Complex mode
(snps,dw-pcie.yaml), it doesn't make sense that those drivers should use a
different reg-name when running in Endpoint mode (snps,dw-pcie-ep.yaml).
Therefore, since "apb" is already defined in snps,dw-pcie.yaml, add it
also for snps,dw-pcie-ep.yaml.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-1-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
|
|
If the link is powered off during suspend, electrical noise may cause
errors that trigger DPC. If the DPC interrupt is enabled and shares an IRQ
with PME, that causes a spurious wakeup during suspend.
Disable DPC triggering and the DPC interrupt during suspend to prevent
this. Clear DPC interrupt status before re-enabling DPC interrupts during
resume so we don't get an interrupt for errors that occurred during the
suspend/resume process.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209149
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218090
Link: https://lore.kernel.org/r/20240416043225.1462548-3-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: clear status on resume, add comments, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
If the link is powered off during suspend, electrical noise may cause
errors that are logged via AER. If the AER interrupt is enabled and shares
an IRQ with PME, that causes a spurious wakeup during suspend.
Disable the AER interrupt during suspend to prevent this. Clear error
status before re-enabling IRQ interrupts during resume so we don't get an
interrupt for errors that occurred during the suspend/resume process.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209149
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218090
Link: https://lore.kernel.org/r/20240416043225.1462548-2-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: drop pci_ancestor_pr3_present() etc, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/hotplug/acpiphp_ampere_altra.o
Add the missing MODULE_DESCRIPTION().
Link: https://lore.kernel.org/r/20240612-md-drivers-pci-hotplug-v1-1-2b30d14d783d@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
During remove & rescan cycle, PCI subsystem will recalculate and adjust
the bridge window sizing that was initially done by "BIOS". The size
calculation is based on the required alignment of the largest resource
among the downstream resources as per pbus_size_mem() (unimportant or
zero parameters marked with "..."):
min_align = calculate_mem_align(aligns, max_order);
size0 = calculate_memsize(size, ..., min_align);
inside calculate_memsize(), for the largest alignment:
min_align = align1 >> 1;
...
return min_align;
and then in calculate_memsize():
return ALIGN(max(size, ...), align);
If the original bridge window sizing tried to conserve space, this will
lead to massive increase of the required bridge window size when the
downstream has a large disparity in BAR sizes. E.g., with 16MiB and
16GiB BARs this results in 24GiB bridge window size even if 16MiB BAR
does not require gigabytes of space to fit.
When doing remove & rescan for a bus that contains such a PCI device, a
larger bridge window is suddenly required on rescan but when there is a
bridge window upstream that is already assigned based on the original
size, it cannot be enlarged to the new requirement. This causes the
allocation of the bridge window to fail (0x600000000 > 0x400ffffff):
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [mem 0x40400000-0x406fffff]
pci 0000:01:00.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]
pci 0000:03:00.0: device released
pci 0000:02:01.0: device released
pcieport 0000:01:00.0: scanning [bus 02-04] behind bridge, pass 0
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]
pci 0000:02:01.0: scanning [bus 03-03] behind bridge, pass 0
pci 0000:03:00.0: BAR 0 [mem 0x6400000000-0x6400ffffff 64bit pref]
pci 0000:03:00.0: BAR 2 [mem 0x6000000000-0x63ffffffff 64bit pref]
pci 0000:03:00.0: ROM [mem 0x40400000-0x405fffff pref]
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: scanning [bus 03-03] behind bridge, pass 1
pcieport 0000:01:00.0: scanning [bus 02-04] behind bridge, pass 1
pci 0000:02:01.0: bridge window [mem size 0x600000000 64bit pref]: can't assign; no space
pci 0000:02:01.0: bridge window [mem size 0x600000000 64bit pref]: failed to assign
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]: assigned
pci 0000:03:00.0: BAR 2 [mem size 0x400000000 64bit pref]: can't assign; no space
pci 0000:03:00.0: BAR 2 [mem size 0x400000000 64bit pref]: failed to assign
pci 0000:03:00.0: BAR 0 [mem size 0x01000000 64bit pref]: can't assign; no space
pci 0000:03:00.0: BAR 0 [mem size 0x01000000 64bit pref]: failed to assign
pci 0000:03:00.0: ROM [mem 0x40400000-0x405fffff pref]: assigned
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]
This is a major surprise for users who are suddenly left with a device that
was working fine with the original bridge window sizing.
Even if the already assigned bridge window could be enlarged by
reallocation in some cases (something the current code does not attempt
to do), it is not possible in general case and the large amount of
wasted space at the tail of the bridge window may lead to other
resource exhaustion problems on Root Complex level (think of multiple
PCIe cards with VFs and BAR size disparity in a single system).
PCI BARs only need natural alignment (PCIe r6.1, sec 7.5.1.2.1) and bridge
memory windows need 1MiB (sec 7.5.1.3). The current bridge window tail
alignment rule was introduced in the commit 5d0a8965aea9 ("[PATCH] 2.5.14:
New PCI allocation code (alpha, arm, parisc) [2/2]") that only states:
"pbus_size_mem: core stuff; tested with randomly generated sets of
resources". It does not explain the motivation for the extra tail space
allocated that is not truly needed by the downstream resources. As such, it
is far from clear if it ever has been required by any HW.
To prevent devices with BAR size disparity from becoming unusable after
remove & rescan cycle, attempt to do a truly minimal allocation for memory
resources if needed. First check if the normally calculated bridge window
will not fit into an already assigned upstream resource. In such case, try
with relaxed bridge window tail sizing rules instead where no extra tail
space is requested beyond what the downstream resources require. Only
enforce the alignment requirement of the bridge window itself (normally
1MiB).
With this patch, the resources are successfully allocated:
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: scanning [bus 03-03] behind bridge, pass 1
pcieport 0000:01:00.0: scanning [bus 02-04] behind bridge, pass 1
pcieport 0000:01:00.0: Assigned bridge window [mem 0x6000000000-0x6400ffffff 64bit pref] to [bus 02-04] cannot fit 0x600000000 required for 0000:02:01.0 bridging to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref] to [bus 03] requires relaxed alignment rules
pcieport 0000:01:00.0: Assigned bridge window [mem 0x40400000-0x406fffff] to [bus 02-04] free space at [mem 0x40400000-0x405fffff]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]: assigned
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]: assigned
pci 0000:03:00.0: BAR 2 [mem 0x6000000000-0x63ffffffff 64bit pref]: assigned
pci 0000:03:00.0: BAR 0 [mem 0x6400000000-0x6400ffffff 64bit pref]: assigned
pci 0000:03:00.0: ROM [mem 0x40400000-0x405fffff pref]: assigned
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]
This patch draws inspiration from the initial investigations and work by
Mika Westerberg.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216795
Link: https://lore.kernel.org/linux-pci/20190812144144.2646-1-mika.westerberg@linux.intel.com/
Fixes: 5d0a8965aea9 ("[PATCH] 2.5.14: New PCI allocation code (alpha, arm, parisc) [2/2]")
Link: https://lore.kernel.org/r/20240507102523.57320-9-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Calculations related to bridge window size contain literal 20 that is the
minimum alignment for a bridge window. Make the code more obvious by
converting the literal 20 to __ffs(SZ_1M).
Link: https://lore.kernel.org/r/20240507102523.57320-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash https://lore.kernel.org/r/20240612093250.17544-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The recent adventure with adding lockdep tracking for cfg_access_lock,
while it yielded many false positives [1], did catch a true positive in the
pci_reset_bus() path [2].
So, while lockdep is difficult to deploy, open coding a check that
cfg_access_lock is held during the reset is feasible.
While this does not offer a full backtrace, it should be sufficient to
implicate the caller of pci_bridge_secondary_bus_reset() as a path that
needs investigation.
Link: https://lore.kernel.org/r/171711746953.1628941.4692125082286867825.stgit@dwillia2-xfh.jf.intel.com
Link: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_134186v1/shard-dg2-1/igt@device_reset@unbind-reset-rebind.html [1]
Link: http://lore.kernel.org/r/cfb50601-5d2a-4676-a958-1bd3f1b06654@intel.com [2]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
|
|
Use preserve_config in place of checking for PCI_PROBE_ONLY flag to enable
support for "linux,pci-probe-only" on a per host bridge basis.
This also obviates the use of adding PCI_REASSIGN_ALL_BUS flag if
!PCI_PROBE_ONLY, as pci_assign_unassigned_root_bus_resources() takes care
of reassigning the resources that are not already claimed.
Link: https://lore.kernel.org/r/20240508174138.3630283-5-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Unify the 'preserve config' support across ACPI and device-tree
boot flows.
Link: https://lore.kernel.org/r/20240508174138.3630283-4-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add of_pci_preserve_config() to look for the "linux,pci-probe-only"
property under a specified node. If it's not found there, look under
"of_chosen" in addition.
If the caller didn't specify a node, look under "of_chosen".
With a future patch, this will support "linux,pci-probe-only" on a per host
bridge basis based on the presence of the property in the respective PCI
host bridge DT node.
Implement of_pci_check_probe_only() using of_pci_preserve_config().
Link: https://lore.kernel.org/r/20240508174138.3630283-3-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Move the PRESERVE_BOOT_CONFIG _DSM evaluation from acpi_pci_root_create()
to pci_register_host_bridge().
This will help unify the ACPI _DSM path and the DT-based
"linux,pci-probe-only" paths.
This should be safe because it happens earlier than it used to:
acpi_pci_root_create
pci_create_root_bus
pci_register_host_bridge
+ bridge->preserve_config = pci_preserve_config(bridge)
pci_acpi_preserve_config
+ acpi_evaluate_dsm_typed(DSM_PCI_PRESERVE_BOOT_CONFIG)
- acpi_evaluate_dsm_typed(DSM_PCI_PRESERVE_BOOT_CONFIG)
No functional change intended.
Link: https://lore.kernel.org/r/20240508174138.3630283-2-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Ricky reports that replacing a device in a hotplug slot during ACPI sleep
state S3 does not cause re-enumeration on resume, as one would expect.
Instead, the new device is treated as if it was the old one.
There is no bulletproof way to detect device replacement, but as a
heuristic, check whether the device identity in config space matches cached
data in struct pci_dev (Vendor ID, Device ID, Class Code, Revision ID,
Subsystem Vendor ID, Subsystem ID). Additionally, cache and compare the
Device Serial Number (PCIe r6.2 sec 7.9.3). If a mismatch is detected,
mark the old device disconnected (to prevent its driver from accessing the
new device) and synthesize a Presence Detect Changed event.
The device identity in config space which is compared here is the same as
the one included in the signed Subject Alternative Name per PCIe r6.1 sec
6.31.3. Thus, the present commit prevents attacks where a valid device is
replaced with a malicious device during system sleep and the valid device's
driver obliviously accesses the malicious device.
This is about as much as can be done at the PCI layer. Drivers may have
additional ways to identify devices (such as reading a WWID from some
register) and may trigger re-enumeration when detecting an identity change
on resume.
Link: https://lore.kernel.org/r/a1afaa12f341d146ecbea27c1743661c71683833.1716992815.git.lukas@wunner.de
Reported-by: Ricky Wu <ricky_wu@realtek.com>
Closes: https://lore.kernel.org/r/a608b5930d0a48f092f717c0e137454b@realtek.com
Tested-by: Ricky Wu <ricky_wu@realtek.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Per PCIe r6.0, sec 5.2, a Link Down event can happen under any of the
following circumstances:
1. Fundamental/Hot reset
2. Link disable transmission by upstream component
3. Moving from L2/L3 to L0
When the event happens, the EPC driver capable of detecting it may pass the
notification to the EPF driver through link_down() callback in 'struct
pci_epc_event_ops'.
While the PCIe spec has not defined the actual behavior of the endpoint
when the Link Down event happens, we may assume that at least the ongoing
transactions need to be stopped as the link won't be active, so
cancel the command handler work in the callback implementation
pci_epf_test_link_down(). The work will be started again in
pci_epf_test_link_up() once the link comes back again.
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-10-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: update spec citation]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
The of_gpio.h legacy API is going to be removed. In preparation for that,
convert the driver to the agnostic API.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The of_gpio.h API is deprecated and subject to removal. The driver doesn't
use it, so simply remove the unused header.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The of_gpio.h API is deprecated and subject to removal. The driver doesn't
use it, so simply remove the unused header.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Driver is using chained_irq_*() APIs, add the respective inclusion.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
If IORESOURCE_BUS is not provided in Device Tree it will be fabricated in
of_pci_parse_bus_range(), so NULL pointer dereference should not happen
here.
But that's hard to verify, so check for NULL anyway.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lore.kernel.org/linux-pci/20240503125705.46055-1-amishin@t-argos.ru
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pbus_size_mem() keeps the size of the optional resources in
children_add_size. When calculating the PCI bridge window size,
calculate_memsize() lower bounds size by old_size before adding
children_add_size and performing the window size alignment. This
results in double counting for the resources in children_add_size
because old_size may be based on the previous size of the bridge
window after it has already included children_add_size (that is,
size1 in pbus_size_mem() from an earlier invocation of that
function).
As a result, on repeated remove of the bus & rescan cycles the resource
size keeps increasing when children_add_size is non-zero as can be seen
from this extract:
iomem0: 23fffd00000-23fffdfffff : PCI Bus 0000:03 # 1MiB
iomem1: 20000000000-200001fffff : PCI Bus 0000:03 # 2MiB
iomem2: 20000000000-200002fffff : PCI Bus 0000:03 # 3MiB
iomem3: 20000000000-200003fffff : PCI Bus 0000:03 # 4MiB
iomem4: 20000000000-200004fffff : PCI Bus 0000:03 # 5MiB
Solve the double counting by moving old_size check later in
calculate_memsize() so that children_add_size is already accounted for.
After the patch, the bridge window retains its size as expected:
iomem0: 23fffd00000-23fffdfffff : PCI Bus 0000:03 # 1MiB
iomem1: 20000000000-200000fffff : PCI Bus 0000:03 # 1MiB
iomem2: 20000000000-200000fffff : PCI Bus 0000:03 # 1MiB
Fixes: a4ac9fea016f ("PCI : Calculate right add_size")
Link: https://lore.kernel.org/r/20240507102523.57320-2-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
PCI bridge window logic needs to find out in advance to the actual
allocation if there is an empty space big enough to fit the window.
Export find_resource_space() for the purpose. Also move the struct
resource_constraint into generic header to be able to use the new
interface.
Link: https://lore.kernel.org/r/20240507102523.57320-7-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
allocate_resource() accepts ->alignf() callback to perform custom alignment
beyond constraint->align. If alignf is NULL, simple_align_resource() is
used which only returns avail->start (no change).
Using avail->start directly is natural and can be done with a conditional
in __find_resource_space() instead which avoids unnecessarily using
callback. It makes the code inside __find_resource_space() more obvious and
removes the need for the caller to provide constraint->alignf
unnecessarily.
This is preparation for exporting find_resource_space().
Link: https://lore.kernel.org/r/20240507102523.57320-6-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
To make it simpler to declare resource constraint alignf callbacks, add
typedef for it and document it.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240507102523.57320-5-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Document find_resource_space() and the struct resource_constraint as they
are going to be exposed outside of resource.c.
Link: https://lore.kernel.org/r/20240507102523.57320-4-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Rename find_resource() to find_resource_space() to better describe what the
function does. This is a preparation for exposing it beyond resource.c,
which is needed by PCI core. Also rename the __ variant to match the names.
Link: https://lore.kernel.org/r/20240507102523.57320-3-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
To maintain uniformity across EPF drivers, move DMA initialization to EPC
init callback. This will also allow us to deinit DMA during PERST# assert
in the further commits.
For EPC drivers without PERST#, DMA deinit will only happen during driver
unbind.
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-6-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Move the pci_epc_clear_bar() and pci_epf_free_space() code to respective
helper functions. This allows reusing the helpers in future commits.
This also requires moving the pci_epf_test_unbind() definition below
pci_epf_test_bind() to avoid forward declaration of the above helpers.
No functional change.
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-5-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
BME which stands for 'Bus Master Enable' is not defined in the PCIe base
spec even though it is commonly referred in many places (vendor docs). To
align with the spec, rename it to its expansion 'Bus Master Enable'.
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-3-22832d0d456f@linaro.org
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-4-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: squash removal of irrelevant 'Link is enabled']
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
epc_init()
core_init() callback is used to notify the EPC initialization event to the
EPF drivers. The 'core' prefix was used indicate that the controller IP
core has completed initialization. But it serves no purpose as the EPF
driver will only care about the EPC initialization as a whole and there is
no real benefit to distinguish the IP core part.
Rename the core_init() callback in 'struct pci_epc_event_ops' to epc_init()
to make it more clear.
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-2-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
pci_epf_test_alloc_space()
Instead of using a local variable to cache the 'msix_capable' flag, use it
directly to simplify the code.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/linux-pci/20240418-pci-epf-test-fix-v2-2-eacd54831444@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
pci_epf_test_core_init()
Instead of getting the epc_features from pci_epc_get_features() API, use
the cached pci_epf_test::epc_features value to avoid the NULL check. Since
the NULL check is already performed in pci_epf_test_bind(), having one more
check in pci_epf_test_core_init() is redundant and it is not possible to
hit the NULL pointer dereference.
Also with commit a01e7214bef9 ("PCI: endpoint: Remove "core_init_notifier"
flag"), 'epc_features' got dereferenced without the NULL check, leading to
the following false positive Smatch warning:
drivers/pci/endpoint/functions/pci-epf-test.c:784 pci_epf_test_core_init() error: we previously assumed 'epc_features' could be null (see line 747)
Thus, remove the redundant NULL check and also use the epc_features::
{msix_capable/msi_capable} flags directly to avoid local variables.
[kwilczynski: commit log]
Fixes: 5e50ee27d4a5 ("PCI: pci-epf-test: Add support to defer core initialization")
Closes: https://lore.kernel.org/linux-pci/024b5826-7180-4076-ae08-57d2584cca3f@moroto.mountain
Link: https://lore.kernel.org/linux-pci/20240418-pci-epf-test-fix-v2-1-eacd54831444@linaro.org
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
In "struct pci_epf_group", the 'type_group' field is unused.
This was added, but already unused, by commit 70b3740f2c19 ("PCI: endpoint:
Automatically create a function specific attributes group").
Thus, remove it.
Found with cppcheck, unusedStructMember.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/6507d44b6c60a19af35a605e2d58050be8872ab6.1712341008.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The Broadcom BCM5760X NIC may be a multi-function device.
While it does not advertise an ACS capability, peer-to-peer transactions
are not possible between the individual functions. So it is ok to treat
them as fully isolated.
Add an ACS quirk for this device so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240510204228.73435-1-ajit.khaparde@broadcom.com
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
|
|
|
|
percpu.h depends on smp.h, but doesn't include it directly because of
circular header dependency issues; percpu.h is needed in a bunch of low
level headers.
This fixes a randconfig build error on mips:
include/linux/alloc_tag.h: In function '__alloc_tag_ref_set':
include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 24e44cc22aa3 ("mm: percpu: enable per-cpu allocation tagging")
Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tool fix from Arnaldo Carvalho de Melo:
"Revert a patch causing a regression.
This made a simple 'perf record -e cycles:pp make -j199' stop working
on the Ampere ARM64 system Linus uses to test ARM64 kernels".
* tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"
|
|
This reverts commit 617824a7f0f73e4de325cf8add58e55b28c12493.
This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.
The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Ethan Adams <j.ethan.adams@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com
Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull smb client fixes from Steve French:
- two important netfs integration fixes - including for a data
corruption and also fixes for multiple xfstests
- reenable swap support over SMB3
* tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix missing set of remote_i_size
cifs: Fix smb3_insert_range() to move the zero_point
cifs: update internal version number
smb3: reenable swapfiles over SMB3 mounts
|
