Age | Commit message (Collapse) | Author |
|
The recent attempt to make the MediaTek DRM driver build for non-ARM
compile tests made the driver unbuildable for arm64 platforms. Since
this is used on both ARM and arm64 platforms, just drop the dependency
on ARM.
Fixes: d2db0b8fd70b ("drm/mediatek: Allow build with COMPILE_TEST=y")
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029111309.737263-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:
drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
95 | ret = drm_bridge_attach(encoder, bridge, NULL,
| ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
96 | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
| ^
Include the header directly.
Fixes: 004555a18d57 ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.13:
All of the previous pull request, with MORE!
Core Changes:
- Update documentation for scheduler start/stop and job init.
- Add dedede and sm8350-hdk hardware to ci runs.
Driver Changes:
- Small fixes and cleanups to panfrost, omap, nouveau, ivpu, zynqmp, v3d,
panthor docs, and leadtek-ltk050h3146w.
- Crashdump support for qaic.
- Support DP compliance in zynqmp.
- Add Samsung S6E88A0-AMS427AP24 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/deeef745-f3fb-4e85-a9d0-e8d38d43c1cf@linux.intel.com
|
|
Since commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP
boundaries") a mmap() of anonymous memory without a specific address hint
and of at least PMD_SIZE will be aligned to PMD so that it can benefit
from a THP backing page.
However this change has been shown to regress some workloads
significantly. [1] reports regressions in various spec benchmarks, with
up to 600% slowdown of the cactusBSSN benchmark on some platforms. The
benchmark seems to create many mappings of 4632kB, which would have merged
to a large THP-backed area before commit efa7df3e3bb5 and now they are
fragmented to multiple areas each aligned to PMD boundary with gaps
between. The regression then seems to be caused mainly due to the
benchmark's memory access pattern suffering from TLB or cache aliasing due
to the aligned boundaries of the individual areas.
Another known regression bisected to commit efa7df3e3bb5 is darktable [2]
[3] and early testing suggests this patch fixes the regression there as
well.
To fix the regression but still try to benefit from THP-friendly anonymous
mapping alignment, add a condition that the size of the mapping must be a
multiple of PMD size instead of at least PMD size. In case of many
odd-sized mapping like the cactusBSSN creates, those will stop being
aligned and with gaps between, and instead naturally merge again.
Link: https://lkml.kernel.org/r/20241024151228.101841-2-vbabka@suse.cz
Fixes: efa7df3e3bb5 ("mm: align larger anonymous mappings on THP boundaries")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Michael Matz <matz@suse.de>
Debugged-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1229012 [1]
Reported-by: Matthias Bodenbinder <matthias@bodenbinder.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219366 [2]
Closes: https://lore.kernel.org/all/2050f0d4-57b0-481d-bab8-05e8d48fed0c@leemhuis.info/ [3]
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Petr Tesarik <ptesarik@suse.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A memleak was found as below:
unreferenced object 0xffff8881010d2a80 (size 32):
comm "mkdir", pid 1559, jiffies 4294932666
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 @...............
backtrace (crc 2e7ef6fa):
[<ffffffff81372754>] __kmalloc_node_noprof+0x394/0x470
[<ffffffff813024ab>] alloc_shrinker_info+0x7b/0x1a0
[<ffffffff813b526a>] mem_cgroup_css_online+0x11a/0x3b0
[<ffffffff81198dd9>] online_css+0x29/0xa0
[<ffffffff811a243d>] cgroup_apply_control_enable+0x20d/0x360
[<ffffffff811a5728>] cgroup_mkdir+0x168/0x5f0
[<ffffffff8148543e>] kernfs_iop_mkdir+0x5e/0x90
[<ffffffff813dbb24>] vfs_mkdir+0x144/0x220
[<ffffffff813e1c97>] do_mkdirat+0x87/0x130
[<ffffffff813e1de9>] __x64_sys_mkdir+0x49/0x70
[<ffffffff81f8c928>] do_syscall_64+0x68/0x140
[<ffffffff8200012f>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
alloc_shrinker_info(), when shrinker_unit_alloc() returns an errer, the
info won't be freed. Just fix it.
Link: https://lkml.kernel.org/r/20241025060942.1049263-1-chenridong@huaweicloud.com
Fixes: 307bececcd12 ("mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Wang Weiyang <wangweiyang2@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update e-mail address.
Link: https://lkml.kernel.org/r/20241025085848.483149-1-eugen.hristev@linaro.org
Signed-off-by: Eugen Hristev <eugen.hristev@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When numa balancing is enabled with demotion, vmscan will call
migrate_pages when shrinking LRUs. migrate_pages will decrement the
the node's isolated page count, leading to an imbalanced count when
invoked from (MG)LRU code.
The result is dmesg output like such:
$ cat /proc/sys/vm/stat_refresh
[77383.088417] vmstat_refresh: nr_isolated_anon -103212
[77383.088417] vmstat_refresh: nr_isolated_file -899642
This negative value may impact compaction and reclaim throttling.
The following path produces the decrement:
shrink_folio_list
demote_folio_list
migrate_pages
migrate_pages_batch
migrate_folio_move
migrate_folio_done
mod_node_page_state(-ve) <- decrement
This path happens for SUCCESSFUL migrations, not failures. Typically
callers to migrate_pages are required to handle putback/accounting for
failures, but this is already handled in the shrink code.
When accounting for migrations, instead do not decrement the count when
the migration reason is MR_DEMOTION. As of v6.11, this demotion logic
is the only source of MR_DEMOTION.
Link: https://lkml.kernel.org/r/20241025141724.17927-1-gourry@gourry.net
Fixes: 26aa2d199d6f ("mm/migrate: demote pages during reclaim")
Signed-off-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Wei Xu <weixugc@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove my previous work email, and the new one. The previous was never
used in the commit log, so there's no good reason to spare it.
Link: https://lkml.kernel.org/r/20241025181530.6151-1-jarkko@kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geliang Tang <geliang@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: Matt Ranostay <matt@ranostay.sg>
Cc: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Cc: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull rdma fixes from Jason Gunthorpe:
- Put the QP netlink dump back in cxgb4, fixes a user visible
regression
- Don't change the rounding style in mlx5 for user provided rd_atomic
values
- Resolve a race in bnxt_re around the qp-handle table array
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: synchronize the qp-handle table array
RDMA/bnxt_re: Fix the usage of control path spin locks
RDMA/mlx5: Round max_rd_atomic/max_dest_rd_atomic up instead of down
RDMA/cxgb4: Dump vendor specific QP details
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix BPF verifier to force a checkpoint when the program's jump
history becomes too long (Eduard Zingerman)
- Add several fixes to the BPF bits iterator addressing issues like
memory leaks and overflow problems (Hou Tao)
- Fix an out-of-bounds write in trie_get_next_key (Byeonguk Jeong)
- Fix BPF test infra's LIVE_FRAME frame update after a page has been
recycled (Toke Høiland-Jørgensen)
- Fix BPF verifier and undo the 40-bytes extra stack space for
bpf_fastcall patterns due to various bugs (Eduard Zingerman)
- Fix a BPF sockmap race condition which could trigger a NULL pointer
dereference in sock_map_link_update_prog (Cong Wang)
- Fix tcp_bpf_recvmsg_parser to retrieve seq_copied from tcp_sk under
the socket lock (Jiayuan Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, test_run: Fix LIVE_FRAME frame update after a page has been recycled
selftests/bpf: Add three test cases for bits_iter
bpf: Use __u64 to save the bits in bits iterator
bpf: Check the validity of nr_words in bpf_iter_bits_new()
bpf: Add bpf_mem_alloc_check_size() helper
bpf: Free dynamically allocated bits in bpf_iter_bits_destroy()
bpf: disallow 40-bytes extra stack for bpf_fastcall patterns
selftests/bpf: Add test for trie_get_next_key()
bpf: Fix out-of-bounds write in trie_get_next_key()
selftests/bpf: Test with a very short loop
bpf: Force checkpoint when jmp history is too long
bpf: fix filed access without lock
sock_map: fix a NULL pointer dereference in sock_map_link_update_prog()
|
|
The const MAX_BRIDGES is unused after the commit 4d1a1e4686bd ("drm/msm:
remove msm_drm_private::bridges field"), drop it now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622537/
Link: https://lore.kernel.org/r/20241031-dpu-move-topology-v1-3-8ffa8122d3b6@linaro.org
|
|
The MAX_H_TILES_PER_DISPLAY const is only used by the DPU driver, move
it to the corresponding header.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622536/
Link: https://lore.kernel.org/r/20241031-dpu-move-topology-v1-2-8ffa8122d3b6@linaro.org
|
|
The struct msm_display_topology is only used by the DPU driver. Remove
it from the global header and move it to DPU-specific header.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622534/
Link: https://lore.kernel.org/r/20241031-dpu-move-topology-v1-1-8ffa8122d3b6@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi, bluetooth and netfilter.
No known new regressions outstanding.
Current release - regressions:
- wifi: mt76: do not increase mcu skb refcount if retry is not
supported
Current release - new code bugs:
- wifi:
- rtw88: fix the RX aggregation in USB 3 mode
- mac80211: fix memory corruption bug in struct ieee80211_chanctx
Previous releases - regressions:
- sched:
- stop qdisc_tree_reduce_backlog on TC_H_ROOT
- sch_api: fix xa_insert() error path in tcf_block_get_ext()
- wifi:
- revert "wifi: iwlwifi: remove retry loops in start"
- cfg80211: clear wdev->cqm_config pointer on free
- netfilter: fix potential crash in nf_send_reset6()
- ip_tunnel: fix suspicious RCU usage warning in ip_tunnel_find()
- bluetooth: fix null-ptr-deref in hci_read_supported_codecs
- eth: mlxsw: add missing verification before pushing Tx header
- eth: hns3: fixed hclge_fetch_pf_reg accesses bar space out of
bounds issue
Previous releases - always broken:
- wifi: mac80211: do not pass a stopped vif to the driver in
.get_txpower
- netfilter: sanitize offset and length before calling skb_checksum()
- core:
- fix crash when config small gso_max_size/gso_ipv4_max_size
- skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension
- mptcp: protect sched with rcu_read_lock
- eth: ice: fix crash on probe for DPLL enabled E810 LOM
- eth: macsec: fix use-after-free while sending the offloading packet
- eth: stmmac: fix unbalanced DMA map/unmap for non-paged SKB data
- eth: hns3: fix kernel crash when 1588 is sent on HIP08 devices
- eth: mtk_wed: fix path of MT7988 WO firmware"
* tag 'net-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
net: hns3: fix kernel crash when 1588 is sent on HIP08 devices
net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue
net: hns3: initialize reset_timer before hclgevf_misc_irq_init()
net: hns3: don't auto enable misc vector
net: hns3: Resolved the issue that the debugfs query result is inconsistent.
net: hns3: fix missing features due to dev->features configuration too early
net: hns3: fixed reset failure issues caused by the incorrect reset type
net: hns3: add sync command to sync io-pgtable
net: hns3: default enable tx bounce buffer when smmu enabled
netfilter: nft_payload: sanitize offset and length before calling skb_checksum()
net: ethernet: mtk_wed: fix path of MT7988 WO firmware
selftests: forwarding: Add IPv6 GRE remote change tests
mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address
mlxsw: pci: Sync Rx buffers for device
mlxsw: pci: Sync Rx buffers for CPU
mlxsw: spectrum_ptp: Add missing verification before pushing Tx header
net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()
netfilter: Fix use-after-free in get_info()
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20241028
1. Fix degradation problem of alpha blending
2. Fix color format MACROs in OVL
3. Fix get efuse issue for MT8188 DPTX
4. Fix potential NULL dereference in mtk_crtc_destroy()
5. Correct dpi power-domains property
6. Add split subschema property constraints
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028135846.3570-1-chunkuang.hu@kernel.org
|
|
There may be a potential integer overflow issue in
_dpu_core_perf_calc_clk(). crtc_clk is defined as u64, while
mode->vtotal, mode->hdisplay, and drm_mode_vrefresh(mode) are defined as
a smaller data type. The result of the calculation will be limited to
"int" in this case without correct casting. In screen with high
resolution and high refresh rate, integer overflow may happen.
So, we recommend adding an extra cast to prevent potential
integer overflow.
Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622206/
Link: https://lore.kernel.org/r/20241029194209.23684-1-zichenxie0106@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.12-2024-10-31:
amdgpu:
- DCN 3.5 fix
- Vangogh SMU KASAN fix
- SMU 13 profile reporting fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031151539.3523633-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
ivpu:
- Fix firewall IRQ handling
panthor:
- Fix firmware initialization wrt page sizes
- Fix handling and reporting of dead job groups
sched:
- Guarantee forward progress via WC_MEM_RECLAIM
tests:
- Fix memory leak in drm_display_mode_from_cea_vic()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031144348.GA7826@linux-2.fritz.box
|
|
Follow the established symbol name pattern and rename platform data
structures.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/622213/
Link: https://lore.kernel.org/r/20241029-msm-dp-rename-v2-3-13c5c03fad44@linaro.org
|
|
Follow the estalished prefix and rename eDP bridge symbols to use
msm_edp_ prefix, moving the edp to the end of the symbol name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622210/
Link: https://lore.kernel.org/r/20241029-msm-dp-rename-v2-2-13c5c03fad44@linaro.org
|
|
For historical reasons a lot of symbols in the MSM DisplayPort driver
used the generic dp_ prefix. Perform a mass-rename of those symbols to
use msm_dp prefix.
Basically this is a result of the following script:
sed drivers/gpu/drm/msm/dp/* -i -e 's/\<dp_/msm_dp_/g'
sed drivers/gpu/drm/msm/dp/* -i -e 's/"msm_dp_/"dp_/g'
sed drivers/gpu/drm/msm/dp/* -i -e 's/msm_\(dp_sdp_header\|dp_sdp\)\>/\1/g'
Yes, this also results in renaming of several struct fields in addition
to renaming the structs and functions, but I think the simple solution
is better than the more complex one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410250305.UHKDhtxy-lkp@intel.com/
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/622211/
Link: https://lore.kernel.org/r/20241029-msm-dp-rename-v2-1-13c5c03fad44@linaro.org
|
|
From LNL onwards there is a new hardware feature, which
allows to detect if the driver wrongly allocated DBuf
entries and they happen to overlap. If enabled this will
cause a specific interrupt to occur.
We now handle it in the driver, by writing correspondent
error message to kernel log.
v2: Initialize dbuf overlap flag in runtime_defaults (Jani Nikula)
v3: Unmask the overlap detection interrupt (Uma)
v4: use display over i915 (Jani Nikula)
v5: Use display instead of dev_priv (Jani Nikula)
v6: rebased to resolve merge conflicts
Bspec: 69450, 69464
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030103319.207235-1-vinod.govindapillai@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here we see slightly more commits than wished, but basically all are
small and mostly trivial fixes.
The only core change is the workaround for __counted_by() usage in
ASoC DAPM code, while the rest are device-specific fixes for Intel
Baytrail devices, Cirrus and wcd937x codecs, and HD-audio / USB-audio
devices"
* tag 'sound-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix headset mic on TUXEDO Stellaris 16 Gen6 mb1
ALSA: hda/realtek: Fix headset mic on TUXEDO Gemini 17 Gen3
ALSA: usb-audio: Add quirks for Dell WD19 dock
ASoC: codecs: wcd937x: relax the AUX PDM watchdog
ASoC: codecs: wcd937x: add missing LO Switch control
ASoC: dt-bindings: rockchip,rk3308-codec: add port property
ALSA: hda/realtek: Add subwoofer quirk for Infinix ZERO BOOK 13
ASoC: dapm: fix bounds checker error in dapm_widget_list_create
ASoC: Intel: sst: Fix used of uninitialized ctx to log an error
ASoC: cs42l51: Fix some error handling paths in cs42l51_probe()
ASoC: Intel: sst: Support LPE0F28 ACPI HID
ALSA: hda/realtek: Limit internal Mic boost on Dell platform
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet
ASoC: Intel: bytcr_rt5640: Add support for non ACPI instantiated codec
ASoC: codecs: rt5640: Always disable IRQs from rt5640_cancel_work()
|
|
Add the missing newline after entries for recently removed gpio chips
so that the chip sections are separated by a newline as intended.
Fixes: e348544f7994 ("gpio: protect the list of GPIO devices with SRCU")
Cc: stable@vger.kernel.org # 6.9
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241028125000.24051-3-johan+linaro@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The gpiolib debugfs interface exports a list of all gpio chips in a
system and the state of their pins.
The gpio chip sections are supposed to be separated by a newline
character, but a long-standing bug prevents the separator from
being included when output is generated in multiple sessions, making the
output inconsistent and hard to read.
Make sure to only suppress the newline separator at the beginning of the
file as intended.
Fixes: f9c4a31f6150 ("gpiolib: Use seq_file's iterator interface")
Cc: stable@vger.kernel.org # 3.7
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241028125000.24051-2-johan+linaro@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
At least the i-tec USB-C Nano 2x Display Docking Station (containing a
Synaptics MST branch device) requires the driver to update the source
OUI DPCD registers to expose its DSC capability. Accordingly update the
OUI for all sink types (besides eDP where this has been done already).
v2: Rebased on latest patch version.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11776
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-9-imre.deak@intel.com
|
|
The DP sink's capabilities, like DSC, may depend on the source OUI
written to the sink. On eDP this OUI value could have been reset before
the detection started if the panel power on it got disabled. Make sure
the OUI is re-written at the beginning of detection in this case, before
the sink capabilities are read out.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-8-imre.deak@intel.com
|
|
The eDP sink's capabilities, like DSC, may depend on the source OUI
written to the sink, so ensure the OUI is written before reading out the
capabilities.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-7-imre.deak@intel.com
|
|
Reuse intel_dp_detect_dsc_caps() which already checks for the source's
DSC cap and retrieves the DPCD version from the DPRX caps.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-6-imre.deak@intel.com
|
|
While updating the source OUI on the sink the driver should avoid
writing the OUI if it's already up-to-date to prevent the sink from
resetting itself in response to the update. On eDP - the only output
type where the OUI was updated so far - the driver ensured this by
comparing the current source OUI DPCD register values with the expected
Intel OUI value, skipping the update in case of a match. On some non-eDP
sinks - at least on Synaptics branch devices - this method doesn't work,
since the source OUI DPCD registers read back as all 0, even after
updating the registers.
Handle the above kind of sinks by tracking when the OUI was updated and
so should be valid, regardless of what the DPCD registers contain.
eDP sinks reset the written source OUI value when the panel power is
disabled, invalidate the OUI state accordingly.
This is required by a follow-up patch updating the source OUI for
non-eDP sink types as well.
v2: Fix setting intel_dp::oui_valid=true, if the DPCD register contains
already the expected value.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-5-imre.deak@intel.com
|
|
If the source OUI DPCD register value matches the expected Intel OUI
value, the write timestamp doesn't get updated leaving it at the 0
initial value if the OUI wasn't written before. This can lead to an
incorrect wait duration in intel_dp_wait_source_oui(), since jiffies is
not inited to 0 in general (on a 32 bit system INITIAL_JIFFIES is set to
5 minutes ahead of wrap-around). Fix this by intializing the write
timestamp in the above case as well.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-4-imre.deak@intel.com
|
|
The sink's capabilities, like the DSC caps, depend on the source OUI
written to the sink's DPCD registers and so this OUI value should be
valid for the whole duration of the detection. An eDP sink will reset
this OUI value when the panel power is disabled, so prevent the
disabling - happening by default after a 1 sec idle period - for the
whole duration of detection.
v2: Update the documentation for intel_pps_on(). (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-3-imre.deak@intel.com
|
|
Make sure that a DP connector detection doesn't happen in parallel
with an ongoing modeset on the connector. The reasons for this are:
- Besides reading the capabilities, EDID etc. the detection may change
the state of the sink (via the AUX bus), for instance by setting the
LTTPR mode or the source OUI (the latter introduced by an upcoming
patch). It's better to avoid such changes affecting an onging modeset
in any way.
- During a modeset's link training any access to DPCD registers, besides
the registers used for link training should be avoided, at least in
the LTTPR non-transparent and transparent link training modes.
Such asynchronous accesses - besides connector detection - can also
happen via the AUX device node for instance, for those a parallel
modeset will have to be avoided in a similar way to the change in this
patch. (A topic for a follow-up change.)
- The source OUI written to an eDP sink is valid only while the panel
power is enabled. A modeset on eDP will enable/disable the panel power
synchronously; this should be prevented in the middle of the connector
detection, to ensure a consistent sink state (which depends on the
source OUI) for the whole duration of detection. The panel power could
still get disabled during detection after an idle period (1 sec), this
will be prevented by the next patch.
v2: (Ville)
- s/wait_for_crtc_hw_done/wait_for_connector_hw_done
- Get drm_device using an intel_display instead of drm_i915_private ptr.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-2-imre.deak@intel.com
|
|
When running defrag (manual defrag) against a file that has extents that
are contiguous and we already have the respective extent maps loaded and
merged, we end up not defragging the range covered by those contiguous
extents. This happens when we have an extent map that was the result of
merging multiple extent maps for contiguous extents and the length of the
merged extent map is greater than or equals to the defrag threshold
length.
The script below reproduces this scenario:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a 256K file with 4 extents of 64K each.
xfs_io -f -c "falloc 0 64K" \
-c "pwrite 0 64K" \
-c "falloc 64K 64K" \
-c "pwrite 64K 64K" \
-c "falloc 128K 64K" \
-c "pwrite 128K 64K" \
-c "falloc 192K 64K" \
-c "pwrite 192K 64K" \
$MNT/foo
umount $MNT
echo -n "Initial number of file extent items: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
mount $DEV $MNT
# Read the whole file in order to load and merge extent maps.
cat $MNT/foo > /dev/null
btrfs filesystem defragment -t 128K $MNT/foo
umount $MNT
echo -n "Number of file extent items after defrag with 128K threshold: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
mount $DEV $MNT
# Read the whole file in order to load and merge extent maps.
cat $MNT/foo > /dev/null
btrfs filesystem defragment -t 256K $MNT/foo
umount $MNT
echo -n "Number of file extent items after defrag with 256K threshold: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
Running it:
$ ./test.sh
Initial number of file extent items: 4
Number of file extent items after defrag with 128K threshold: 4
Number of file extent items after defrag with 256K threshold: 4
The 4 extents don't get merged because we have an extent map with a size
of 256K that is the result of merging the individual extent maps for each
of the four 64K extents and at defrag_lookup_extent() we have a value of
zero for the generation threshold ('newer_than' argument) since this is a
manual defrag. As a consequence we don't call defrag_get_extent() to get
an extent map representing a single file extent item in the inode's
subvolume tree, so we end up using the merged extent map at
defrag_collect_targets() and decide not to defrag.
Fix this by updating defrag_lookup_extent() to always discard extent maps
that were merged and call defrag_get_extent() regardless of the minimum
generation threshold ('newer_than' argument).
A test case for fstests will be sent along soon.
CC: stable@vger.kernel.org # 6.1+
Fixes: 199257a78bb0 ("btrfs: defrag: don't use merged extent map for their generation check")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we have 3 or more adjacent extents in a file, that is, consecutive file
extent items pointing to adjacent extents, within a contiguous file range
and compatible flags, we end up not merging all the extents into a single
extent map.
For example:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -d -c "pwrite -b 64K 0 64K" \
-c "pwrite -b 64K 64K 64K" \
-c "pwrite -b 64K 128K 64K" \
-c "pwrite -b 64K 192K 64K" \
/mnt/sdc/foo
After all the ordered extents complete we unpin the extent maps and try
to merge them, but instead of getting a single extent map we get two
because:
1) When the first ordered extent completes (file range [0, 64K)) we
unpin its extent map and attempt to merge it with the extent map for
the range [64K, 128K), but we can't because that extent map is still
pinned;
2) When the second ordered extent completes (file range [64K, 128K)), we
unpin its extent map and merge it with the previous extent map, for
file range [0, 64K), but we can't merge with the next extent map, for
the file range [128K, 192K), because this one is still pinned.
The merged extent map for the file range [0, 128K) gets the flag
EXTENT_MAP_MERGED set;
3) When the third ordered extent completes (file range [128K, 192K)), we
unpin its extent map and attempt to merge it with the previous extent
map, for file range [0, 128K), but we can't because that extent map
has the flag EXTENT_MAP_MERGED set (mergeable_maps() returns false
due to different flags) while the extent map for the range [128K, 192K)
doesn't have that flag set.
We also can't merge it with the next extent map, for file range
[192K, 256K), because that one is still pinned.
At this moment we have 3 extent maps:
One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 192K).
One for file range [192K, 256K) which is still pinned;
4) When the fourth and final extent completes (file range [192K, 256K)),
we unpin its extent map and attempt to merge it with the previous
extent map, for file range [128K, 192K), which succeeds since none
of these extent maps have the EXTENT_MAP_MERGED flag set.
So we end up with 2 extent maps:
One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 256K), with the flag EXTENT_MAP_MERGED set.
Since after merging extent maps we don't attempt to merge again, that
is, merge the resulting extent map with the one that is now preceding
it (and the one following it), we end up with those two extent maps,
when we could have had a single extent map to represent the whole file.
Fix this by making mergeable_maps() ignore the EXTENT_MAP_MERGED flag.
While this doesn't present any functional issue, it prevents the merging
of extent maps which allows to save memory, and can make defrag not
merging extents too (that will be addressed in the next patch).
Fixes: 199257a78bb0 ("btrfs: defrag: don't use merged extent map for their generation check")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The test_run code detects whether a page has been modified and
re-initialises the xdp_frame structure if it has, using
xdp_update_frame_from_buff(). However, xdp_update_frame_from_buff()
doesn't touch frame->mem, so that wasn't correctly re-initialised, which
led to the pages from page_pool not being returned correctly. Syzbot
noticed this as a memory leak.
Fix this by also copying the frame->mem structure when re-initialising
the frame, like we do on initialisation of a new page from page_pool.
Fixes: e5995bc7e2ba ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption")
Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Reported-by: syzbot+d121e098da06af416d23@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+d121e098da06af416d23@syzkaller.appspotmail.com
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20241030-test-run-mem-fix-v1-1-41e88e8cae43@redhat.com
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.12
- Spec compliant identification fix (Keith)
- Module parameter to enable backward compatibility on unusual
namespace formats (Keith)
- Target double free fix when using keys (Vitaliy)
- Passthrough command error handling fix (Keith)"
* tag 'nvme-6.12-2024-10-31' of git://git.infradead.org/nvme:
nvme: re-fix error-handling for io_uring nvme-passthrough
nvmet-auth: assign dh_key to NULL after kfree_sensitive
nvme: module parameter to disable pi with offsets
nvme: enhance cns version checking
|
|
I haven't been able to properly review the work on the driver for a while.
Hence, this commit removes me from the maintainers list.
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Acked-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014145009.3360515-1-mairacanal@riseup.net
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
When io_uring starts a write, it'll call kiocb_start_write() to bump the
super block rwsem, preventing any freezes from happening while that
write is in-flight. The freeze side will grab that rwsem for writing,
excluding any new writers from happening and waiting for existing writes
to finish. But io_uring unconditionally uses kiocb_start_write(), which
will block if someone is currently attempting to freeze the mount point.
This causes a deadlock where freeze is waiting for previous writes to
complete, but the previous writes cannot complete, as the task that is
supposed to complete them is blocked waiting on starting a new write.
This results in the following stuck trace showing that dependency with
the write blocked starting a new write:
task:fio state:D stack:0 pid:886 tgid:886 ppid:876
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_rwsem_wait+0x1e8/0x3f8
__percpu_down_read+0xe8/0x500
io_write+0xbb8/0xff8
io_issue_sqe+0x10c/0x1020
io_submit_sqes+0x614/0x2110
__arm64_sys_io_uring_enter+0x524/0x1038
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
INFO: task fsfreeze:7364 blocked for more than 15 seconds.
Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963
with the attempting freezer stuck trying to grab the rwsem:
task:fsfreeze state:D stack:0 pid:7364 tgid:7364 ppid:995
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_down_write+0x2b0/0x680
freeze_super+0x248/0x8a8
do_vfs_ioctl+0x149c/0x1b18
__arm64_sys_ioctl+0xd0/0x1a0
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a
blocking grab of the super block rwsem if it isn't set. For normal issue
where IOCB_NOWAIT would always be set, this returns -EAGAIN which will
have io_uring core issue a blocking attempt of the write. That will in
turn also get completions run, ensuring forward progress.
Since freezing requires CAP_SYS_ADMIN in the first place, this isn't
something that can be triggered by a regular user.
Cc: stable@vger.kernel.org # 5.10+
Reported-by: Peter Mann <peter.mann@sh.cz>
Link: https://lore.kernel.org/io-uring/38c94aec-81c9-4f62-b44e-1d87f5597644@sh.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Short circuiting TDR on jobs not started is an optimization which is not
required. On LNL we are facing an issue where jobs do not get scheduled
by the GuC if it misses a GGTT page update. When this occurs let the TDR
fire, toggle the scheduling which may get the job unstuck, and print a
warning message. If the TDR fires twice on job that hasn't started,
timeout the job.
v2:
- Add warning message (Paulo)
- Add fixes tag (Paulo)
- Timeout job which hasn't started after TDR firing twice
v3:
- Include local change
v4:
- Short circuit check_timeout on job not started
- use warn level rather than notice (Paulo)
Fixes: 7ddb9403dd74 ("drm/xe: Sample ctx timestamp to determine if jobs have timed out")
Cc: stable@vger.kernel.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025214330.2010521-2-matthew.brost@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 35d25a4a0012e690ef0cc4c5440231176db595cc)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
On LNL without a mmio read before a GGTT invalidate the GuC can
incorrectly read the GGTT scratch page upon next access leading to jobs
not getting scheduled. A mmio read before a GGTT invalidate seems to fix
this. Since a GGTT invalidate is not a hot code path, blindly do a mmio
read before each GGTT invalidate.
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3164
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023221200.1797832-1-matthew.brost@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 5a710196883e0ac019ac6df2a6d79c16ad3c32fa)
[ Fix conflict with mmio vs gt argument ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.
Fixes: 7828b7bbbf20 ("gpio: add sloppy logic analyzer using polling")
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241030174132.2113286-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Since commit f79dc03fe68c ("kconfig: refactor choice value
calculation"), when EXPERT is disabled, nothing within the "if INPUT"
... "endif" block in drivers/input/Kconfig is displayed. This issue
affects all command-line interfaces and GUI frontends.
The prompt for INPUT is hidden when EXPERT is disabled. Previously,
menu_is_visible() returned true in this case; however, it now returns
false, resulting in all sub-menu entries being skipped.
Here is a simplified test case illustrating the issue:
config A
bool "A" if X
default y
config B
bool "B"
depends on A
When X is disabled, A becomes unconfigurable and is forced to y.
B should be displayed, as its dependency is met.
This commit restores the necessary code, so menu_is_visible() functions
as it did previously.
Fixes: f79dc03fe68c ("kconfig: refactor choice value calculation")
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/all/5fd0dfc7ff171aa74352e638c276069a5f2e888d.camel@proton.me/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The Debian kernel supports the pkg.linux.nokerneldbg build profile.
The debug package tends to become huge, and you may not want to build
it even when CONFIG_DEBUG_INFO is enabled.
This commit introduces a similar profile for the upstream kernel.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Since commit f1d87664b82a ("kbuild: cross-compile linux-headers package
when possible"), 'make bindeb-pkg' may attempt to cross-compile the
linux-headers package, but it fails under certain circumstances.
For example, when CONFIG_MODULE_SIG_FORMAT is enabled on Debian, the
following command fails:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bindeb-pkg
[ snip ]
Rebuilding host programs with aarch64-linux-gnu-gcc...
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/kallsyms
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sorttable
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/asn1_compiler
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sign-file
In file included from /usr/include/openssl/opensslv.h:109,
from debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sign-file.c:25:
/usr/include/openssl/macros.h:14:10: fatal error: openssl/opensslconf.h: No such file or directory
14 | #include <openssl/opensslconf.h>
| ^~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
This commit adds a new profile, pkg.linux-upstream.nokernelheaders, to
guard the linux-headers package.
There are two options to fix the above issue.
Option 1: Set the pkg.linux-upstream.nokernelheaders build profile
$ DEB_BUILD_PROFILES=pkg.linux-upstream.nokernelheaders \
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bindeb-pkg
This skips the building of the linux-headers package.
Option 2: Install the necessary build dependencies
If you want to cross-compile the linux-headers package, you need to
install additional packages.
For example, on Debian, the packages necessary for cross-compiling it
to arm64 can be installed with the following commands:
# dpkg --add-architecture arm64
# apt update
# apt install gcc-aarch64-linux-gnu libssl-dev:arm64
Fixes: f1d87664b82a ("kbuild: cross-compile linux-headers package when possible")
Reported-by: Ron Economos <re@w6rz.net>
Closes: https://lore.kernel.org/all/b3d4f49e-7ddb-29ba-0967-689232329b53@w6rz.net/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Ron Economos <re@w6rz.net>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Since commit f1d87664b82a ("kbuild: cross-compile linux-headers package
when possible"), 'make binrpm-pkg' may attempt to cross-compile the
kernel-devel package, but it fails under certain circumstances.
For example, when CONFIG_MODULE_SIG_FORMAT is enabled on openSUSE
Tumbleweed, the following command fails:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-suse-linux- binrpm-pkg
[ snip ]
Rebuilding host programs with aarch64-suse-linux-gcc...
HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/kallsyms
HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/sorttable
HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/asn1_compiler
HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/sign-file
/home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/sign-file.c:25:10: fatal error: openssl/opensslv.h: No such file or directory
25 | #include <openssl/opensslv.h>
| ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
I believe this issue is less common on Fedora because the disto's cross-
compilier cannot link user-space programs. Hence, CONFIG_CC_CAN_LINK is
unset.
On Fedora 40, the package information explains this limitation clearly:
$ dnf info gcc-aarch64-linux-gnu
[ snip ]
Description : Cross-build GNU C compiler.
:
: Only building kernels is currently supported. Support for cross-building
: user space programs is not currently provided as that would massively multiply
: the number of packages.
Anyway, cross-compiling RPM packages is somewhat challenging.
This commit disables the kernel-devel package when cross-compiling
because I did not come up with a better solution.
Fixes: f1d87664b82a ("kbuild: cross-compile linux-headers package when possible")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Fix an issue detected by the Smatch tool:
drivers/gpio/gpiolib-swnode.c:78 swnode_find_gpio() error:
uninitialized symbol 'ret'.
The issue occurs because the 'ret' variable may be used without
initialization if the for_each_gpio_property_name loop does not run.
This could lead to returning an undefined value, causing unpredictable
behavior.
Initialize 'ret' to 0 before the loop to ensure the function
returns an error code if no properties are parsed, maintaining proper
error handling.
Fixes: 9e4c6c1ad ("Merge tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linux")
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://lore.kernel.org/r/20241026090642.28633-1-surajsonawane0215@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
drm_sched_start()'s and drm_sched_stop()'s names suggest that those
functions might be intended for actively starting and stopping the
scheduler on initialization and teardown.
They are, however, only used on timeout handling (reset recovery). The
docstrings should reflect that to prevent confusion.
Document those functions' purpose.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029133819.78696-2-pstanner@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
The following patchset contains Netfilter fixes for net:
1) Remove unused parameters in conntrack_dump_flush.c used by
selftests, from Liu Jing.
2) Fix possible UaF when removing xtables module via getsockopt()
interface, from Dong Chenchen.
3) Fix potential crash in nf_send_reset6() reported by syzkaller.
From Eric Dumazet
4) Validate offset and length before calling skb_checksum()
in nft_payload, otherwise hitting BUG() is possible.
netfilter pull request 24-10-31
* tag 'nf-24-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_payload: sanitize offset and length before calling skb_checksum()
netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()
netfilter: Fix use-after-free in get_info()
selftests: netfilter: remove unused parameter
====================
Link: https://patch.msgid.link/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci: fix null-ptr-deref in hci_read_supported_codecs
* tag 'for-net-2024-10-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
====================
Link: https://patch.msgid.link/20241030192205.38298-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|