| Age | Commit message (Collapse) | Author |
|---|
|
Merge cpufreq fixes for 6.15-rc5:
- Fix a recent regression causing systems where frequency tables are
used by cpufreq to have issues with setting frequency limits (Rafael
Wysocki).
- Fix a recent regressions causing frequency boost settings to become
out-of-sync if platform firmware updates the registers associated
with them during system resume (Viresh Kumar).
- Fix an unchecked MSR aceess in the intel_pstate driver occurring when
CPUID indicates no turbo, but the driver attempts to enable turbo
frequencies due to a misleading value read from an MSR (Srinivas
Pandruvada).
* pm-cpufreq:
cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
cpufreq: Fix setting policy limits when frequency tables are used
cpufreq: ACPI: Re-sync CPU boost state on system resume
|
|
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:
root@rb1:~# gpiomon -c gpiochip1 10
irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
Unable to handle kernel paging request at virtual address ffff8000a1dc3820
Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
pc : mpm_set_type+0x80/0xcc
lr : mpm_set_type+0x5c/0xcc
Call trace:
mpm_set_type+0x80/0xcc (P)
qcom_mpm_set_type+0x64/0x158
irq_chip_set_type_parent+0x20/0x38
msm_gpio_irq_set_type+0x50/0x530
__irq_set_trigger+0x60/0x184
__setup_irq+0x304/0x6bc
request_threaded_irq+0xc8/0x19c
edge_detector_setup+0x260/0x364
linereq_create+0x420/0x5a8
gpio_ioctl+0x2d4/0x6c0
Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs.
Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250502-irq-qcom-mpm-fix-no-wake-v1-1-8a1eafcd28d4@linaro.org
|
|
Running the "perf script task-analyzer tests" with address sanitizer
showed a double free:
```
FAIL: "test_csv_extended_times" Error message: "Failed to find required string:'Out-Out;'."
=================================================================
==19190==ERROR: AddressSanitizer: attempting double-free on 0x50b000017b10 in thread T0:
#0 0x55da9601c78a in free (perf+0x26078a) (BuildId: e7ef50e08970f017a96fde6101c5e2491acc674a)
#1 0x55da96640c63 in filename__read_build_id tools/perf/util/symbol-minimal.c:221:2
0x50b000017b10 is located 0 bytes inside of 112-byte region [0x50b000017b10,0x50b000017b80)
freed by thread T0 here:
#0 0x55da9601ce40 in realloc (perf+0x260e40) (BuildId: e7ef50e08970f017a96fde6101c5e2491acc674a)
#1 0x55da96640ad6 in filename__read_build_id tools/perf/util/symbol-minimal.c:204:10
previously allocated by thread T0 here:
#0 0x55da9601ca23 in malloc (perf+0x260a23) (BuildId: e7ef50e08970f017a96fde6101c5e2491acc674a)
#1 0x55da966407e7 in filename__read_build_id tools/perf/util/symbol-minimal.c:181:9
SUMMARY: AddressSanitizer: double-free (perf+0x26078a) (BuildId: e7ef50e08970f017a96fde6101c5e2491acc674a) in free
==19190==ABORTING
FAIL: "invocation of perf script report task-analyzer --csv-summary csvsummary --summary-extended command failed" Error message: ""
FAIL: "test_csvsummary_extended" Error message: "Failed to find required string:'Out-Out;'."
---- end(-1) ----
132: perf script task-analyzer tests : FAILED!
```
The buf_size if always set to phdr->p_filesz, but that may be 0
causing a free and realloc to return NULL. This is treated in
filename__read_build_id like a failure and the buffer is freed again.
To avoid this problem only grow buf, meaning the buf_size will never
be 0. This also reduces the number of memory (re)allocations.
Fixes: b691f64360ecec49 ("perf symbols: Implement poor man's ELF parser")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250501070003.22251-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is a breakdown of perf_mem_data_src.mem_dtlb values. It assumes
PMU drivers would set PERF_MEM_TLB_HIT bit with an appropriate level.
And having PERF_MEM_TLB_MISS means that it failed to find one in any
levels of TLB. For now, it doesn't use PERF_MEM_TLB_{WK,OS} bits.
Also it seems Intel machines don't distinguish L1 or L2 precisely. So I
added ANY_HIT (printed as "L?-Hit") to handle the case.
$ perf mem report -F overhead,dtlb,dso --stdio
...
# --- D-TLB ----
# Overhead L?-Hit Miss Shared Object
# ........ .............. .................
#
67.03% 99.5% 0.5% [unknown]
31.23% 99.2% 0.8% [kernel.kallsyms]
1.08% 97.8% 2.2% [i915]
0.36% 100.0% 0.0% [JIT] tid 6853
0.12% 100.0% 0.0% [drm]
0.05% 100.0% 0.0% [drm_kms_helper]
0.05% 100.0% 0.0% [ext4]
0.02% 100.0% 0.0% [aesni_intel]
0.02% 100.0% 0.0% [crc32c_intel]
0.02% 100.0% 0.0% [dm_crypt]
...
Committer testing:
# perf report --header | grep cpudesc
# cpudesc : AMD Ryzen 9 9950X3D 16-Core Processor
# perf mem report -F overhead,dtlb,dso --stdio | head -20
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 2K of event 'cycles:P'
# Total weight : 2637
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked,local_ins_lat,local_p_stage_cyc
#
# ---------- D-TLB -----------
# Overhead L1-Hit L2-Hit Miss Other Shared Object
# ........ ............................ .................................
#
77.47% 18.4% 0.1% 0.6% 80.9% [kernel.kallsyms]
5.61% 36.5% 0.7% 1.4% 61.5% libxul.so
2.77% 39.7% 0.0% 12.3% 47.9% libc.so.6
2.01% 34.0% 1.9% 1.9% 62.3% libglib-2.0.so.0.8400.1
1.93% 31.4% 2.0% 2.0% 64.7% [amdgpu]
1.63% 48.8% 0.0% 0.0% 51.2% [JIT] tid 60168
1.14% 3.3% 0.0% 0.0% 96.7% [vdso]
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is a breakdown of perf_mem_data_src.mem_snoop values. For now, it
doesn't use mem_snoopx values like FWD and PEER.
$ perf mem report -F overhead,snoop,comm --stdio
...
# ---------- Snoop -----------
# Overhead Hit HitM Miss Other Command
# ........ ............................ ...............
#
34.24% 0.6% 0.0% 0.0% 99.4% gnome-shell
12.02% 1.0% 0.0% 0.0% 99.0% chrome
9.32% 1.0% 0.0% 0.3% 98.7% Isolated Web Co
6.85% 1.0% 0.3% 0.0% 98.6% swapper
6.30% 0.8% 0.8% 0.0% 98.5% Xorg
3.02% 2.4% 0.0% 0.0% 97.6% VizCompositorTh
2.35% 0.0% 0.0% 0.0% 100.0% firefox-esr
2.04% 0.0% 0.0% 0.0% 100.0% JS Helper
1.51% 3.2% 0.0% 0.0% 96.8% threaded-ml
1.44% 0.0% 0.0% 0.0% 100.0% AudioIP~allback
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is a breakdown of perf_mem_data_src.mem_lvl_num. But it's also
divided into two parts because the combination is bigger than 8.
Since there are many entries for different cache levels, 'cache' field
focuses on them. I generalized buffers like LFB, MAB and MHB to L1-buf
and L2-buf.
The rest goes to 'memory' field which can be RAM, CXL, PMEM, IO, etc.
$ perf mem report -F cache,mem,dso --stdio
...
#
# -------------- Cache -------------- --- Memory ---
# L1 L2 L3 L1-buf Other RAM Other Shared Object
# ................................... .............. ....................................
#
53.9% 3.6% 16.2% 21.6% 4.8% 4.8% 95.2% [kernel.kallsyms]
64.7% 1.7% 3.5% 17.4% 12.8% 12.8% 87.2% chrome (deleted)
78.3% 2.8% 0.0% 1.0% 17.9% 17.9% 82.1% libc.so.6
39.6% 1.5% 0.0% 5.7% 53.2% 53.2% 46.8% libxul.so
26.2% 0.0% 0.0% 0.0% 73.8% 73.8% 26.2% [unknown]
85.5% 0.0% 0.0% 14.5% 0.0% 0.0% 100.0% libspa-audioconvert.so
66.3% 4.4% 0.0% 29.4% 0.0% 0.0% 100.0% libglib-2.0.so.0.8200.1 (deleted)
1.9% 0.0% 0.0% 0.0% 98.1% 98.1% 1.9% libmutter-cogl-15.so.0.0.0 (deleted)
10.6% 0.0% 0.0% 89.4% 0.0% 0.0% 100.0% libpulsecommon-16.1.so
0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 100.0% libfreeblpriv3.so (deleted)
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some mem_stat types don't use all 8 columns. And there are cases only
samples in certain kinds of mem_stat types are available only. For that
case hide columns which has no samples.
The new output for the previous data would be:
$ perf mem report -F overhead,op,comm --stdio
...
# ------ Mem Op -------
# Overhead Load Store Other Command
# ........ ..................... ...............
#
44.85% 21.1% 30.7% 48.3% swapper
26.82% 98.8% 0.3% 0.9% netsli-prober
7.19% 51.7% 13.7% 34.6% perf
5.81% 89.7% 2.2% 8.1% qemu-system-ppc
4.77% 100.0% 0.0% 0.0% notifications_c
1.77% 95.9% 1.2% 3.0% MemoryReleaser
0.77% 71.6% 4.1% 24.3% DefaultEventMan
0.19% 66.7% 22.2% 11.1% gnome-shell
...
On Intel machines, the event is only for loads or stores so it'll have
only one column:
# Mem Op
# Overhead Load Command
# ........ ....... ...............
#
20.55% 100.0% swapper
17.13% 100.0% chrome
9.02% 100.0% data-loop.0
6.26% 100.0% pipewire-pulse
5.63% 100.0% threaded-ml
5.47% 100.0% GraphRunner
5.37% 100.0% AudioIP~allback
5.30% 100.0% Chrome_ChildIOT
3.17% 100.0% Isolated Web Co
...
Committer testing:
# grep "model name" -m1 /proc/cpuinfo
model name : AMD Ryzen 9 9950X3D 16-Core Processo
# perf mem report -F overhead,op,comm --stdio
# Total Lost Samples: 0
#
# Samples: 2K of event 'cycles:P'
# Total weight : 2637
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked,local_ins_lat,local_p_stage_cyc
#
# ------ Mem Op -------
# Overhead Load Store Other Command
# ........ ..................... ...............
#
61.02% 14.4% 25.5% 60.1% swapper
5.61% 26.4% 13.5% 60.1% Isolated Web Co
5.50% 21.4% 29.7% 49.0% perf
4.74% 27.2% 15.2% 57.6% gnome-shell
4.63% 33.6% 11.5% 54.9% mdns_service
4.29% 28.3% 12.4% 59.3% ptyxis
2.16% 24.6% 19.3% 56.1% DOM Worker
0.99% 23.1% 34.6% 42.3% firefox
0.72% 26.3% 15.8% 57.9% IPC I/O Parent
0.61% 12.5% 12.5% 75.0% kworker/u130:20
0.61% 37.5% 18.8% 43.8% podman
0.57% 33.3% 6.7% 60.0% Timer
0.53% 14.3% 7.1% 78.6% KMS thread
0.49% 30.8% 7.7% 61.5% kworker/u130:3-
0.46% 41.7% 33.3% 25.0% IPDL Background
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is an actual example of the he_mem_stat based sample breakdown. It
uses 'mem_op' field of union perf_mem_data_src which means memory
operations.
It'd have basically 'load' or 'store' which can be useful if PMU doesn't
have separate events for them like IBS or SPE. In addition, there's an
entry in case load and store happen at the same time. Also adds entries
for prefetching and execution.
$ perf mem report -F +op -s comm --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4K of event 'ibs_op//'
# Total weight : 9559
# Sort order : comm
#
# --------------------- Mem Op ----------------------
# Overhead Samples Load Store Ld+St Pfetch Exec Other N/A N/A Command
# ........ ....... ................................................... ...............
#
44.85% 4077 21.1% 30.7% 0.0% 0.0% 0.0% 48.3% 0.0% 0.0% swapper
26.82% 45 98.8% 0.3% 0.0% 0.0% 0.0% 0.9% 0.0% 0.0% netsli-prober
7.19% 442 51.7% 13.7% 0.0% 0.0% 0.0% 34.6% 0.0% 0.0% perf
5.81% 75 89.7% 2.2% 0.0% 0.0% 0.0% 8.1% 0.0% 0.0% qemu-system-ppc
4.77% 1 100.0% 0.0% 0.0% 0.0% 0.0% 0.0% 0.0% 0.0% notifications_c
1.77% 10 95.9% 1.2% 0.0% 0.0% 0.0% 3.0% 0.0% 0.0% MemoryReleaser
0.77% 32 71.6% 4.1% 0.0% 0.0% 0.0% 24.3% 0.0% 0.0% DefaultEventMan
0.19% 10 66.7% 22.2% 0.0% 0.0% 0.0% 11.1% 0.0% 0.0% gnome-shell
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is a preparation for later changes to support mem_stat output. The
new fields will need two lines for the header - the first line will show
type of mem stat and the second line will show the name of each item
which is returned by mem_stat_name().
Each element in the mem_stat array will be printed in percentage for the
hist_entry and their sum would be 100%.
Add new output field dimension only for SORT_MODE__MEM using mem_stat.
To handle possible name conflict with existing sort keys, move the order
of checking output field dimensions after the sort dimensions when it
looks for sort keys.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a logic to account he->mem_stat based on mem_stat_type in hists.
Each mem_stat entry will have different meaning based on the type so the
index in the array is calculated at runtime using the corresponding
value in the sample.data_src.
Still hists has no mem_stat_types yet so this code won't work for now.
Later hists->mem_stat_types will be allocated based on what users want
in the output actually.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'struct he_mem_stat' is to save detailed information about memory
instruction. It'll be used to show breakdown of various data from
PERF_SAMPLE_DATA_SRC. Note that this structure is generic and the
contents will be different depending on actual data it'll use later.
The information about the actual data will be saved in 'struct hists'
and its length is in nr_mem_stats. This commit just adds ground works
and does nothing since hists->nr_mem_stats is 0 for now.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is a preparation to support multi-line headers in 'perf mem report'.
Normal sort keys and output fields that don't have contents for multi-
line will print the header string at the last line only.
As we don't use multi-line headers normally, it should not have any
changes in the output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's no way to enable PERF_SAMPLE_DATA_SRC without PERF_SAMPLE_ADDR
which brings a lot of overhead due to the number of MMAP[2] records.
Let's add a new option to enable this information separately.
Committer testing:
# perf record -a --sample-mem-info
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.815 MB perf.data (2637 samples) ]
#
# perf evlist -v
cycles:P: type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|IDENTIFIER|DATA_SRC, read_format: ID|LOST, disabled: 1, freq: 1, precise_ip: 2, sample_id_all: 1
dummy:u: type: 1 (PERF_TYPE_SOFTWARE), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|IDENTIFIER|DATA_SRC, read_format: ID|LOST, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
#
# perf report -D |& grep -w PERF_RECORD_SAMPLE -A3 -m1
0 44675164447282 0x1a7590 [0x40]: PERF_RECORD_SAMPLE(IP, 0x4001): 107299/107299: 0xffffffffac4a5e11 period: 144 addr: 0
. data_src: 0x229080142
... thread: perf:107299
...... dso: /lib/modules/6.15.0-rc4+/build/vmlinux
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250430205548.789750-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When it removes an output format for cancelled children or latency, it
should delete itself from the sort list as well. Otherwise assertion
in fmt_free() will fire.
$ perf report -H --stdio
perf: ui/hist.c:603: fmt_free: Assertion `!(!list_empty(&fmt->sort_list))' failed.
Aborted (core dumped)
Also convert to perf_hpp__column_unregister() for the same open codes.
Committer notes:
Before this patch:
# perf test hierarchy
83: perf report --hierarchy : FAILED!
# perf test -v hierarchy
--- start ---
test child forked, pid 102242
perf report --hierarchy
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB /tmp/perf-test-report.HX0N85TlPq/perf-report-hierarchy-perf.data (6 samples) ]
perf: ui/hist.c:603: fmt_free: Assertion `!(!list_empty(&fmt->sort_list))' failed.
/home/acme/libexec/perf-core/tests/shell/perf-report-hierarchy.sh: line 34: 102250 Aborted (core dumped) perf report --hierarchy > /dev/null
--- Cleaning up ---
---- end(-1) ----
83: perf report --hierarchy : FAILED!
#
After:
# perf test hierarchy
83: perf report --hierarchy : Ok
#
Fixes: dbd11b6bdab12f60 ("perf hist: Remove formats in hierarchy when cancel children")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250430180321.736939-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Super simple test to check that at least we're not segfaulting when
trying to use 'perf report --hierarchy', more subtests should be added
to make sure the output is the expected one.
This is being merged right before a fix for that that this test detects:
# perf test hierarchy
83: perf report --hierarchy : FAILED!
# perf test -v hierarchy
--- start ---
test child forked, pid 102242
perf report --hierarchy
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB /tmp/perf-test-report.HX0N85TlPq/perf-report-hierarchy-perf.data (6 samples) ]
perf: ui/hist.c:603: fmt_free: Assertion `!(!list_empty(&fmt->sort_list))' failed.
/home/acme/libexec/perf-core/tests/shell/perf-report-hierarchy.sh: line 34: 102250 Aborted (core dumped) perf report --hierarchy > /dev/null
--- Cleaning up ---
---- end(-1) ----
83: perf report --hierarchy : FAILED!
#
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/lkml/20250430180321.736939-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two minor updates, both in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove redundant query_complete trace
scsi: myrb: Fix spelling mistake "statux" -> "status"
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fix queue unquiesce check on PCI slot_reset (Keith Busch)
- fix premature queue removal and I/O failover in nvme-tcp (Michael
Liang)
- don't restore null sk_state_change (Alistair Francis)
- select CONFIG_TLS where needed (Alistair Francis)
- always free derived key data (Hannes Reinecke)
- more quirks (Wentao Guan)
- ublk zero copy fix
- ublk selftest fix for UBLK_F_NEED_GET_DATA
* tag 'block-6.15-20250502' of git://git.kernel.dk/linux:
nvmet-auth: always free derived key data
nvmet-tcp: don't restore null sk_state_change
nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
nvme-tcp: fix premature queue removal and I/O failover
nvme-pci: add quirks for WDC Blue SN550 15b7:5009
nvme-pci: add quirks for device 126f:1001
nvme-pci: fix queue unquiesce check on slot_reset
ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req
ublk: enhance check for register/unregister io buffer command
ublk: decouple zero copy from user copy
selftests: ublk: fix UBLK_F_NEED_GET_DATA
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix, annotating the fdinfo side SQ/CQ head/tail reads
with data_race() as they are known racy.
Only serves to silence syzbot testing, by definition these debug
outputs are going to be racy as they may change as soon as we've read
them"
* tag 'io_uring-6.15-20250502' of git://git.kernel.dk/linux:
io_uring/fdinfo: annotate racy sq/cq head/tail reads
|
|
Pull bcachefs fixes from Kent Overstreet:
"Lots of assorted small fixes...
- Some repair path fixes, a fix for -ENOMEM when reconstructing lots
of alloc info on large filesystems, upgrade for ancient 0.14
filesystems, etc.
- Various assert tweaks; assert -> ERO, ERO -> log the error in the
superblock and continue
- casefolding now uses d_ops like on other casefolding filesystems
- fix device label create on device add, fix bucket array resize on
filesystem resize
- fix xattrs with FORTIFY_SOURCE builds with gcc-15/clang"
* tag 'bcachefs-2025-05-01' of git://evilpiepirate.org/bcachefs: (22 commits)
bcachefs: Remove incorrect __counted_by annotation
bcachefs: add missing sched_annotate_sleep()
bcachefs: Fix __bch2_dev_group_set()
bcachefs: Kill ERO for i_blocks check in truncate
bcachefs: check for inode.bi_sectors underflow
bcachefs: Kill ERO in __bch2_i_sectors_acct()
bcachefs: readdir fixes
bcachefs: improve missing journal write device error message
bcachefs: Topology error after insert is now an ERO
bcachefs: Use bch2_kvmalloc() for journal keys array
bcachefs: More informative error message when shutting down due to error
bcachefs: btree_root_unreadable_and_scan_found_nothing autofix for non data btrees
bcachefs: btree_node_data_missing is now autofix
bcachefs: Don't generate alloc updates to invalid buckets
bcachefs: Improve bch2_dev_bucket_missing()
bcachefs: fix bch2_dev_buckets_resize()
bcachefs: Add upgrade table entry from 0.14
bcachefs: Run BCH_RECOVERY_PASS_reconstruct_snapshots on missing subvol -> snapshot
bcachefs: Add missing utf8_unload()
bcachefs: Emit unicode version message on startup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix potential NULL dereference in the i.MX driver
- Fix the pull up/down resistor values in the Meson driver
- Fix the mapping of the PHY LED pins in the Airhoa driver
- Fix EINT interrupts on older controllers and a debounce value issue
in the Mediatek driver
- Fix an erronoeus PINGROUP define in the Qualcomm driver
* tag 'pinctrl-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Fix PINGROUP definition for sm8750
pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init()
pinctrl: mediatek: Fix new design debounce issue
pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers
pinctrl: airoha: fix wrong PHY LED mapping and PHY2 LED defines
pinctrl: meson: define the pull up/down resistor value as 60 kOhm
pinctrl: imx: Return NULL if no group is matched and found
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"ARM-SMMU fixes:
- Fix broken detection of the S2FWB feature
- Ensure page-size bitmap is initialised for SVA domains
- Fix handling of SMMU client devices with duplicate Stream IDs
- Don't fail SMMU probe if Stream IDs are aliased across clients
Intel VT-d fixes:
- Add quirk for IGFX device
- Revert an ATS change to fix a boot failure
AMD IOMMU:
- Fix potential buffer overflow
Core:
- Fix for iommu_copy_struct_from_user()"
* tag 'iommu-fixes-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)
iommu/vt-d: Revert ATS timing change to fix boot failure
iommu: Fix two issues in iommu_copy_struct_from_user()
iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid
iommu/arm-smmu-v3: Fail aliasing StreamIDs more gracefully
iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids
iommu/arm-smmu-v3: Fix pgsize_bit for sva domains
iommu/arm-smmu-v3: Add missing S2FWB feature detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix to avoid bugs due to leftover obj_ext after allocation
profiling is disabled at runtime (Zhenhua Huang)
* tag 'slab-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slab: clean up slab->obj_exts always
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.15-rc5
- imx-lpi2c: fix error handling sequence in probe
|
|
The folio_index() helper is only needed for mixed usage of page cache
and swap cache, for pure page cache usage, the caller can just use
folio->index instead.
It can't be a swap cache folio here. Swap mapping may only call into fs
through 'swap_rw' but btrfs does not use that method for swap.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This reverts commit 7e06de7c83a746e58d4701e013182af133395188.
Commit 7e06de7c83a7 ("btrfs: canonicalize the device path before adding
it") tries to make btrfs to use "/dev/mapper/*" name first, then any
filename inside "/dev/" as the device path.
This is mostly fine when there is only the root namespace involved, but
when multiple namespace are involved, things can easily go wrong for the
d_path() usage.
As d_path() returns a file path that is namespace dependent, the
resulted string may not make any sense in another namespace.
Furthermore, the "/dev/" prefix checks itself is not reliable, one can
still make a valid initramfs without devtmpfs, and fill all needed
device nodes manually.
Overall the userspace has all its might to pass whatever device path for
mount, and we are not going to win the war trying to cover every corner
case.
So just revert that commit, and do no extra d_path() based file path
sanity check.
CC: stable@vger.kernel.org # 6.12+
Link: https://lore.kernel.org/linux-fsdevel/20250115185608.GA2223535@zen.localdomain/
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When trying read-only scrub on a btrfs with rescue=idatacsums mount
option, it will crash with the following call trace:
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
CPU: 1 UID: 0 PID: 835 Comm: btrfs Tainted: G O 6.15.0-rc3-custom+ #236 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csums_bitmap+0x49/0x480 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x35b/0x3d0 [btrfs]
scrub_simple_mirror+0x175/0x290 [btrfs]
scrub_stripe+0x5f7/0x6f0 [btrfs]
scrub_chunk+0x9a/0x150 [btrfs]
scrub_enumerate_chunks+0x333/0x660 [btrfs]
btrfs_scrub_dev+0x23e/0x600 [btrfs]
btrfs_ioctl+0x1dcf/0x2f80 [btrfs]
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[CAUSE]
Mount option "rescue=idatacsums" will completely skip loading the csum
tree, so that any data read will not find any data csum thus we will
ignore data checksum verification.
Normally call sites utilizing csum tree will check the fs state flag
NO_DATA_CSUMS bit, but unfortunately scrub does not check that bit at all.
This results in scrub to call btrfs_search_slot() on a NULL pointer
and triggered above crash.
[FIX]
Check both extent and csum tree root before doing any tree search.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
num_extent_folios() unconditionally calls folio_order() on
eb->folios[0]. If that is NULL this will be a segfault. It is reasonable
for it to return 0 as the number of folios in the eb when the first
entry is NULL, so do that instead.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_prelim_ref() calls the old and new reference variables in the
incorrect order. This causes a NULL pointer dereference because oldref
is passed as NULL to trace_btrfs_prelim_ref_insert().
Note, trace_btrfs_prelim_ref_insert() is being called with newref as
oldref (and oldref as NULL) on purpose in order to print out
the values of newref.
To reproduce:
echo 1 > /sys/kernel/debug/tracing/events/btrfs/btrfs_prelim_ref_insert/enable
Perform some writeback operations.
Backtrace:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 115949067 P4D 115949067 PUD 11594a067 PMD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 1188 Comm: fsstress Not tainted 6.15.0-rc2-tester+ #47 PREEMPT(voluntary) 7ca2cef72d5e9c600f0c7718adb6462de8149622
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
RIP: 0010:trace_event_raw_event_btrfs__prelim_ref+0x72/0x130
Code: e8 43 81 9f ff 48 85 c0 74 78 4d 85 e4 0f 84 8f 00 00 00 49 8b 94 24 c0 06 00 00 48 8b 0a 48 89 48 08 48 8b 52 08 48 89 50 10 <49> 8b 55 18 48 89 50 18 49 8b 55 20 48 89 50 20 41 0f b6 55 28 88
RSP: 0018:ffffce44820077a0 EFLAGS: 00010286
RAX: ffff8c6b403f9014 RBX: ffff8c6b55825730 RCX: 304994edf9cf506b
RDX: d8b11eb7f0fdb699 RSI: ffff8c6b403f9010 RDI: ffff8c6b403f9010
RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000010
R10: 00000000ffffffff R11: 0000000000000000 R12: ffff8c6b4e8fb000
R13: 0000000000000000 R14: ffffce44820077a8 R15: ffff8c6b4abd1540
FS: 00007f4dc6813740(0000) GS:ffff8c6c1d378000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 000000010eb42000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
prelim_ref_insert+0x1c1/0x270
find_parent_nodes+0x12a6/0x1ee0
? __entry_text_end+0x101f06/0x101f09
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
btrfs_is_data_extent_shared+0x167/0x640
? fiemap_process_hole+0xd0/0x2c0
extent_fiemap+0xa5c/0xbc0
? __entry_text_end+0x101f05/0x101f09
btrfs_fiemap+0x7e/0xd0
do_vfs_ioctl+0x425/0x9d0
__x64_sys_ioctl+0x75/0xc0
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In preparation for making the kmalloc() family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct folio **" but the returned type will be
"struct page **". These are the same allocation size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Eustall locking fix and disabling on VF
- Documentation fix kernel version supporting hwmon entries
- SVM fixes on error handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/fqkoqvo62fbkvw6xoxoxutzozqksxxudbmqacjm3durid2pkak@imlxghgrk3ob
|
|
The 'has_dma_mapping' flag should be set once there is a
mapping so it could be unmapped in case of error.
v2:
- Resend for CI
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250428024752.881292-1-matthew.brost@intel.com
(cherry picked from commit f64cf7b681af72d3f715c0d0fd72091a54471c1a)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The version in the sysfs attribute should correspond to the version in
which this is enabled and visible for end users. It usually doesn't
correspond to the version in which the patch was developed, but rather a
release that will contain it. Update them to 6.15.
Fixes: dac328dea701 ("drm/xe/hwmon: expose package and vram temperature")
Reported-by: Ulisses Furquim <ulisses.furquim@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4840
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250421-hwmon-doc-fix-v1-1-9f68db702249@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 8500393a8e6c58e5e7c135133ad792fc6fd5b6f4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
On some paths in print_event_fields() it takes the trace_event_sem for
read, even though it should always be held when the function is called.
Remove the taking of that mutex and add a lockdep_assert_held_read() to
make sure the trace_event_sem is held when print_event_fields() is called.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501224128.0b1f0571@batman.local.home
Fixes: 80a76994b2d88 ("tracing: Add "fields" option to show raw trace event fields")
Reported-by: syzbot+441582c1592938fccf09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6813ff5e.050a0220.14dd7d.001b.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.15-2025-05-01:
amdgpu:
- Fix possible UAF in HDCP
- XGMI dma-buf fix
- NBIO 7.11 fix
- VCN 5.0.1 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250501185634.4132187-1-alexander.deucher@amd.com
|
|
This actually reverts 86e92eeeb237 ("bcachefs: Annotate struct bch_xattr
with __counted_by()").
After the x_name, there is a value. According to the disscussion[1],
__counted_by assumes that the flexible array member contains exactly
the amount of elements that are specified. Now there are users came across
a false positive detection of an out of bounds write caused by
the __counted_by here[2], so revert that.
[1] https://lore.kernel.org/lkml/Zv8VDKWN1GzLRT-_@archlinux/T/#m0ce9541c5070146320efd4f928cc1ff8de69e9b2
[2] https://privatebin.net/?a0d4e97d590d71e1#9bLmp2Kb5NU6X6cZEucchDcu88HzUQwHUah8okKPReEt
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The original code would skip null delay pointers, but when the pointers
were converted to point within the spi_device struct, the check was not
updated to skip delays of zero. Hence all spi devices that didn't set
delays would fail to probe.
Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://patch.msgid.link/20250423-spi-tegra114-v1-1-2d608bcc12f9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function trace_adjust_address() is used to map addresses of modules
stored in the persistent memory and are also loaded in the current boot to
return the current address for the module.
If there's only one module entry, it will simply use that, otherwise it
performs a bsearch of the entry array to find the modules to offset with.
The issue is if there are no modules in the array. The code does not
account for that and ends up referencing the first element in the array
which does not exist and causes a crash.
If nr_entries is zero, exit out early as if this was a core kernel
address.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501151909.65910359@gandalf.local.home
Fixes: 35a380ddbc653 ("tracing: Show last module text symbols in the stacktrace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The check for a failed memory location is incorrectly checking
the wrong level of pointer indirection by checking !filter_hash
rather than !*filter_hash. Fix this.
Cc: asami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250422221335.89896-1-colin.i.king@gmail.com
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
drm/i915 fixes for v6.15-rc5:
- Fix build for CONFIG_DRM_I915_PXP=n
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/87selquhpe.fsf@intel.com
|
|
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.
Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14b0 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
00594 ------------[ cut here ]------------
00594 do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000003e51ef4a>] prepare_to_wait_event+0x5c/0x1c0
00594 WARNING: CPU: 12 PID: 1117 at kernel/sched/core.c:8741 __might_sleep+0x74/0x88
00594 Modules linked in:
00594 CPU: 12 UID: 0 PID: 1117 Comm: umount Not tainted 6.15.0-rc4-ktest-g3a72e369412d #21845 PREEMPT
00594 Hardware name: linux,dummy-virt (DT)
00594 pstate: 60001005 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00594 pc : __might_sleep+0x74/0x88
00594 lr : __might_sleep+0x74/0x88
00594 sp : ffffff80c8d67a90
00594 x29: ffffff80c8d67a90 x28: ffffff80f5903500 x27: 0000000000000000
00594 x26: 0000000000000000 x25: ffffff80cf5002a0 x24: ffffffc087dad000
00594 x23: ffffff80c8d67b40 x22: 0000000000000000 x21: 0000000000000000
00594 x20: 0000000000000242 x19: ffffffc080b92020 x18: 00000000ffffffff
00594 x17: 30303c5b20746120 x16: 74657320323d6574 x15: 617473203b474e49
00594 x14: 0000000000000001 x13: 00000000000c0000 x12: ffffff80facc0000
00594 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0800b0774
00594 x8 : c0000000fffbffff x7 : ffffffc087dac670 x6 : 00000000015fffa8
00594 x5 : ffffff80facbffa8 x4 : ffffff80fbd30b90 x3 : 0000000000000000
00594 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff80f5903500
00594 Call trace:
00594 __might_sleep+0x74/0x88 (P)
00594 __mutex_lock+0x64/0x8d8
00594 mutex_lock_nested+0x28/0x38
00594 bch2_fs_ec_flush+0xf8/0x128
00594 __bch2_fs_read_only+0x54/0x1d8
00594 bch2_fs_read_only+0x3e0/0x438
00594 __bch2_fs_stop+0x5c/0x250
00594 bch2_put_super+0x18/0x28
00594 generic_shutdown_super+0x6c/0x140
00594 bch2_kill_sb+0x1c/0x38
00594 deactivate_locked_super+0x54/0xd0
00594 deactivate_super+0x70/0x90
00594 cleanup_mnt+0xec/0x188
00594 __cleanup_mnt+0x18/0x28
00594 task_work_run+0x90/0xd8
00594 do_notify_resume+0x138/0x148
00594 el0_svc+0x9c/0xa0
00594 el0t_64_sync_handler+0x104/0x130
00594 el0t_64_sync+0x154/0x158
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Happy May Day.
Things have calmed down on our end (knock on wood), no outstanding
investigations. Including fixes from Bluetooth and WiFi.
Current release - fix to a fix:
- igc: fix lock order in igc_ptp_reset
Current release - new code bugs:
- Revert "wifi: iwlwifi: make no_160 more generic", fixes regression
to Killer line of devices reported by a number of people
- Revert "wifi: iwlwifi: add support for BE213", initial FW is too
buggy
- number of fixes for mld, the new Intel WiFi subdriver
Previous releases - regressions:
- wifi: mac80211: restore monitor for outgoing frames
- drv: vmxnet3: fix malformed packet sizing in vmxnet3_process_xdp
- eth: bnxt_en: fix timestamping FIFO getting out of sync on reset,
delivering stale timestamps
- use sock_gen_put() in the TCP fraglist GRO heuristic, don't assume
every socket is a full socket
Previous releases - always broken:
- sched: adapt qdiscs for reentrant enqueue cases, fix list
corruptions
- xsk: fix race condition in AF_XDP generic RX path, shared UMEM
can't be protected by a per-socket lock
- eth: mtk-star-emac: fix spinlock recursion issues on rx/tx poll
- btusb: avoid NULL pointer dereference in skb_dequeue()
- dsa: felix: fix broken taprio gate states after clock jump"
* tag 'net-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: vertexcom: mse102x: Fix RX error handling
net: vertexcom: mse102x: Add range check for CMD_RTS
net: vertexcom: mse102x: Fix LEN_MASK
net: vertexcom: mse102x: Fix possible stuck of SPI interrupt
net: hns3: defer calling ptp_clock_register()
net: hns3: fixed debugfs tm_qset size
net: hns3: fix an interrupt residual problem
net: hns3: store rx VLAN tag offload state for VF
octeon_ep: Fix host hang issue during device reboot
net: fec: ERR007885 Workaround for conventional TX
net: lan743x: Fix memleak issue when GSO enabled
ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations
net: use sock_gen_put() when sk_state is TCP_TIME_WAIT
bnxt_en: fix module unload sequence
bnxt_en: Fix ethtool -d byte order for 32-bit values
bnxt_en: Fix out-of-bound memcpy() during ethtool -w
bnxt_en: Fix coredump logic to free allocated buffer
bnxt_en: delay pci_alloc_irq_vectors() in the AER path
bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings()
bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan()
...
|
|
Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") added some additional CPUs to the
Spectre-BHB workaround, including some new arrays for designs that
require new 'k' values for the workaround to be effective.
Unfortunately, the new arrays omitted the sentinel entry and so
is_midr_in_range_list() will walk off the end when it doesn't find a
match. With UBSAN enabled, this leads to a crash during boot when
is_midr_in_range_list() is inlined (which was more common prior to
c8c2647e69be ("arm64: Make _midr_in_range_list() an exported
function")):
| Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP
| pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : spectre_bhb_loop_affected+0x28/0x30
| lr : is_spectre_bhb_affected+0x170/0x190
| [...]
| Call trace:
| spectre_bhb_loop_affected+0x28/0x30
| update_cpu_capabilities+0xc0/0x184
| init_cpu_features+0x188/0x1a4
| cpuinfo_store_boot_cpu+0x4c/0x60
| smp_prepare_boot_cpu+0x38/0x54
| start_kernel+0x8c/0x478
| __primary_switched+0xc8/0xd4
| Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: aarch64 BRK: Fatal exception
Add the missing sentinel entries.
Cc: Lee Jones <lee@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: <stable@vger.kernel.org>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250501104747.28431-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
EU stall sampling is not supported on SRIOV VF. Do not
initialize or open EU stall stream on SRIOV VF.
Fixes: 9a0b11d4cf3b ("drm/xe/eustall: Add support to init, enable and disable EU stall sampling")
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/10db5d1c7e17aadca7078ff74575b7ffc0d5d6b8.1745215022.git.harish.chegondi@intel.com
(cherry picked from commit 6ed20625a4b8189a1bd6598aa58e03147ce378ee)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Use a separate lock in the polling function eu_stall_data_buf_poll()
instead of eu_stall->stream_lock. This would prevent a possible
circular locking dependency leading to a deadlock as described below.
This would also require additional locking with the new lock in
the read function.
<4> [787.192986] ======================================================
<4> [787.192988] WARNING: possible circular locking dependency detected
<4> [787.192991] 6.14.0-rc7-xe+ #1 Tainted: G U
<4> [787.192993] ------------------------------------------------------
<4> [787.192994] xe_eu_stall/20093 is trying to acquire lock:
<4> [787.192996] ffff88819847e2c0 ((work_completion)
(&(&stream->buf_poll_work)->work)), at: __flush_work+0x1f8/0x5e0
<4> [787.193005] but task is already holding lock:
<4> [787.193007] ffff88814ce83ba8 (>->eu_stall->stream_lock){3:3},
at: xe_eu_stall_stream_ioctl+0x41/0x6a0 [xe]
<4> [787.193090] which lock already depends on the new lock.
<4> [787.193093] the existing dependency chain (in reverse order) is:
<4> [787.193095]
-> #1 (>->eu_stall->stream_lock){+.+.}-{3:3}:
<4> [787.193099] __mutex_lock+0xb4/0xe40
<4> [787.193104] mutex_lock_nested+0x1b/0x30
<4> [787.193106] eu_stall_data_buf_poll_work_fn+0x44/0x1d0 [xe]
<4> [787.193155] process_one_work+0x21c/0x740
<4> [787.193159] worker_thread+0x1db/0x3c0
<4> [787.193161] kthread+0x10d/0x270
<4> [787.193164] ret_from_fork+0x44/0x70
<4> [787.193168] ret_from_fork_asm+0x1a/0x30
<4> [787.193172]
-> #0 ((work_completion)(&(&stream->buf_poll_work)->work)){+.+.}-{0:0}:
<4> [787.193176] __lock_acquire+0x1637/0x2810
<4> [787.193180] lock_acquire+0xc9/0x300
<4> [787.193183] __flush_work+0x219/0x5e0
<4> [787.193186] cancel_delayed_work_sync+0x87/0x90
<4> [787.193189] xe_eu_stall_disable_locked+0x9a/0x260 [xe]
<4> [787.193237] xe_eu_stall_stream_ioctl+0x5b/0x6a0 [xe]
<4> [787.193285] __x64_sys_ioctl+0xa4/0xe0
<4> [787.193289] x64_sys_call+0x131e/0x2650
<4> [787.193292] do_syscall_64+0x91/0x180
<4> [787.193295] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<4> [787.193299]
other info that might help us debug this:
<4> [787.193302] Possible unsafe locking scenario:
<4> [787.193304] CPU0 CPU1
<4> [787.193305] ---- ----
<4> [787.193306] lock(>->eu_stall->stream_lock);
<4> [787.193308] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193311] lock(>->eu_stall->stream_lock);
<4> [787.193313] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193315]
*** DEADLOCK ***
Fixes: 760edec939685 ("drm/xe/eustall: Add support to read() and poll() EU stall data")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4598
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/c896932fca84f79db2df5942911997ed77b2b9b6.1744934656.git.harish.chegondi@intel.com
(cherry picked from commit c2b1f1b8641372bb2e563c49eb25632623a860fc)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
bch2_sb_disk_groups_to_cpu() goes off of the superblock member info, so
we need to set that first.
Reported-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For vcn5.0.1 only, enable DPG PAUSE to avoid DPG resets.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e5f86c14c3440171f2a3e7a68ceb739297726e9)
|
|
APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8116a32cdbe456c7f511183eb9ab187e3d590fb)
Cc: stable@vger.kernel.org
|
|
If peer memory is XGMI-accessible, we should never access it through PCIe
P2P DMA mappings. PCIe P2P is slower, has different coherence behaviour,
limited or no support for atomics, or may not work at all. Fail with a
warning if DMABUF mappings of such memory are attempted.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbe4c63689bc6b5fd3ab72650ea4b6a667e96a68)
|
|
The HDCP code in amdgpu_dm_hdcp.c copies pointers to amdgpu_dm_connector
objects without incrementing the kref reference counts. When using a
USB-C dock, and the dock is unplugged, the corresponding
amdgpu_dm_connector objects are freed, creating dangling pointers in the
HDCP code. When the dock is plugged back, the dangling pointers are
dereferenced, resulting in a slab-use-after-free:
[ 66.775837] BUG: KASAN: slab-use-after-free in event_property_validate+0x42f/0x6c0 [amdgpu]
[ 66.776171] Read of size 4 at addr ffff888127804120 by task kworker/0:1/10
[ 66.776179] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.14.0-rc7-00180-g54505f727a38-dirty #233
[ 66.776183] Hardware name: HP HP Pavilion Aero Laptop 13-be0xxx/8916, BIOS F.17 12/18/2024
[ 66.776186] Workqueue: events event_property_validate [amdgpu]
[ 66.776494] Call Trace:
[ 66.776496] <TASK>
[ 66.776497] dump_stack_lvl+0x70/0xa0
[ 66.776504] print_report+0x175/0x555
[ 66.776507] ? __virt_addr_valid+0x243/0x450
[ 66.776510] ? kasan_complete_mode_report_info+0x66/0x1c0
[ 66.776515] kasan_report+0xeb/0x1c0
[ 66.776518] ? event_property_validate+0x42f/0x6c0 [amdgpu]
[ 66.776819] ? event_property_validate+0x42f/0x6c0 [amdgpu]
[ 66.777121] __asan_report_load4_noabort+0x14/0x20
[ 66.777124] event_property_validate+0x42f/0x6c0 [amdgpu]
[ 66.777342] ? __lock_acquire+0x6b40/0x6b40
[ 66.777347] ? enable_assr+0x250/0x250 [amdgpu]
[ 66.777571] process_one_work+0x86b/0x1510
[ 66.777575] ? pwq_dec_nr_in_flight+0xcf0/0xcf0
[ 66.777578] ? assign_work+0x16b/0x280
[ 66.777580] ? lock_is_held_type+0xa3/0x130
[ 66.777583] worker_thread+0x5c0/0xfa0
[ 66.777587] ? process_one_work+0x1510/0x1510
[ 66.777588] kthread+0x3a2/0x840
[ 66.777591] ? kthread_is_per_cpu+0xd0/0xd0
[ 66.777594] ? trace_hardirqs_on+0x4f/0x60
[ 66.777597] ? _raw_spin_unlock_irq+0x27/0x60
[ 66.777599] ? calculate_sigpending+0x77/0xa0
[ 66.777602] ? kthread_is_per_cpu+0xd0/0xd0
[ 66.777605] ret_from_fork+0x40/0x90
[ 66.777607] ? kthread_is_per_cpu+0xd0/0xd0
[ 66.777609] ret_from_fork_asm+0x11/0x20
[ 66.777614] </TASK>
[ 66.777643] Allocated by task 10:
[ 66.777646] kasan_save_stack+0x39/0x60
[ 66.777649] kasan_save_track+0x14/0x40
[ 66.777652] kasan_save_alloc_info+0x37/0x50
[ 66.777655] __kasan_kmalloc+0xbb/0xc0
[ 66.777658] __kmalloc_cache_noprof+0x1c8/0x4b0
[ 66.777661] dm_dp_add_mst_connector+0xdd/0x5c0 [amdgpu]
[ 66.777880] drm_dp_mst_port_add_connector+0x47e/0x770 [drm_display_helper]
[ 66.777892] drm_dp_send_link_address+0x1554/0x2bf0 [drm_display_helper]
[ 66.777901] drm_dp_check_and_send_link_address+0x187/0x1f0 [drm_display_helper]
[ 66.777909] drm_dp_mst_link_probe_work+0x2b8/0x410 [drm_display_helper]
[ 66.777917] process_one_work+0x86b/0x1510
[ 66.777919] worker_thread+0x5c0/0xfa0
[ 66.777922] kthread+0x3a2/0x840
[ 66.777925] ret_from_fork+0x40/0x90
[ 66.777927] ret_from_fork_asm+0x11/0x20
[ 66.777932] Freed by task 1713:
[ 66.777935] kasan_save_stack+0x39/0x60
[ 66.777938] kasan_save_track+0x14/0x40
[ 66.777940] kasan_save_free_info+0x3b/0x60
[ 66.777944] __kasan_slab_free+0x52/0x70
[ 66.777946] kfree+0x13f/0x4b0
[ 66.777949] dm_dp_mst_connector_destroy+0xfa/0x150 [amdgpu]
[ 66.778179] drm_connector_free+0x7d/0xb0
[ 66.778184] drm_mode_object_put.part.0+0xee/0x160
[ 66.778188] drm_mode_object_put+0x37/0x50
[ 66.778191] drm_atomic_state_default_clear+0x220/0xd60
[ 66.778194] __drm_atomic_state_free+0x16e/0x2a0
[ 66.778197] drm_mode_atomic_ioctl+0x15ed/0x2ba0
[ 66.778200] drm_ioctl_kernel+0x17a/0x310
[ 66.778203] drm_ioctl+0x584/0xd10
[ 66.778206] amdgpu_drm_ioctl+0xd2/0x1c0 [amdgpu]
[ 66.778375] __x64_sys_ioctl+0x139/0x1a0
[ 66.778378] x64_sys_call+0xee7/0xfb0
[ 66.778381] do_syscall_64+0x87/0x140
[ 66.778385] entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fix this by properly incrementing and decrementing the reference counts
when making and deleting copies of the amdgpu_dm_connector pointers.
(Mario: rebase on current code and update fixes tag)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Fixes: da3fd7ac0bcf3 ("drm/amd/display: Update CP property based on HW query")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://lore.kernel.org/r/20250417215005.37964-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d4673f3c3b3dcb74e36e53cdfc880baa7a87b330)
Cc: stable@vger.kernel.org
|
