| Age | Commit message (Collapse) | Author |
|---|
|
Gen 4+ ARA to the Quirks List
Lenovo ThinkBook 14 Gen 4+ ARA and ThinkBook 16 Gen 4+ ARA
need to be added to the list of quirks for the microphone to work properly.
Signed-off-by: linkt <xazrael@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/MEYPR01MB8397A3C27DE6206FA3EF834DB6239@MEYPR01MB8397.ausprd01.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Siarhei Volkau <lis8215@gmail.com>:
The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master
|
|
Add set_bais_level function for rt5682s codec to enable bclk and lrclk
before codec widgets power on and disable bclk and lrclk after widgets
power down, to avoid pop noise
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20220921090750.3833256-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
The IPC4 use of doorbell registers leaves some corner cases not well defined
and the 'correct sequences' are subjective in a sense.
The DSP doorbell registers are used as separate and independent channels and
the sequences for host -> DSP -> host (reply) can be racy.
For example:
The ACKing of a received message can happen before the firmware sends the reply
or it can as well happen after the reply has been sent and received by the host.
Both can be considered 'correct sequences' but they need different handling.
This series will allow the kernel to service any interpretation of the
sequencing on the firmware side.
|
|
"Route"
There are two spelling mistakes in codec routing description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221019071639.1003730-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "convert-xxx" properties only have an effect for DPCM DAI links.
A DAI link is only created as DPCM if the device tree requires it;
part of this involves checking for the use of "convert-xxx" properties.
When the convert-sample-format property was added, the checks got out
of sync. A DAI link that specified only convert-sample-format but did
not pass any of the other DPCM checks would not go into DPCM mode and
the convert-sample-format property would be silently ignored.
Fix this by adding a function to do the "convert-xxx" property checks,
instead of open-coding it in simple-card and audio-graph-card. And add
"convert-sample-format" to the check function so that DAI links using
it will be initialized correctly.
Fixes: 047a05366f4b ("ASoC: simple-card-utils: Fixup DAI sample format")
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20221019012302.633830-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver missed the default value of register 0xc070/0xc360.
This patch adds that default value to avoid invalid register access
when the device doesn't be enumerated yet.
BugLink: https://github.com/thesofproject/linux/issues/3924
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20221019095715.31082-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch updates the pad control and checks the
hardware version to set the different preset settings.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20221019095731.31101-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current soc-pcm.c is coping fe hw_param to dpcm->hw_param (A),
fixup it (B), and copy it to be (C).
int dpcm_be_dai_hw_params(...)
{
...
for_each_dpcm_be(fe, stream, dpcm) {
...
/* copy params for each dpcm */
(A) memcpy(&dpcm->hw_params, &fe->dpcm[stream].hw_params, ...) ;
/* perform any hw_params fixups */
(B) ret = snd_soc_link_be_hw_params_fixup(be, &dpcm->hw_params);
...
/* copy the fixed-up hw params for BE dai */
(C) memcpy(&be->dpcm[stream].hw_params, &dpcm->hw_params, ...);
...
}
...
}
But here, (1) it is coping hw_params without caring stream (Playback/Capture),
(2) we can get same value from be. We don't need to have dpcm->hw_params.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/87v8ogsl6h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The comment of snd_soc_dapm_widget_for_each_path() (= X) has
"_sink_" (= s), but this is typo.
With "_sink_" is already exist at (A). This patch fixup it.
/**
(s) * snd_soc_dapm_widget_for_each_sink_path - ...
* ****
*/
(X) #define snd_soc_dapm_widget_for_each_path(w, dir, p)
/**
(s) * snd_soc_dapm_widget_for_each_sink_path_safe - ...
* ****
*/
(X) #define snd_soc_dapm_widget_for_each_path_safe(w, dir, p, next_p)
(A) #define snd_soc_dapm_widget_for_each_sink_path(w, p)
****
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/87wn8wsl6n.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc-dapm.h defines many things, but it is using
randam white space and tag.
This patch do nothing, but cleanup its white space.
This patch cleanup also 100 char in 1 line.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/87y1tcsl6u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dapm_up_seq is arranged in numerical order, but _dai_link
is out of order. This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/87zgdssl70.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_dapm_new_dai() setups local variable "template" at (X) and (Y),
which is used at (Z). But these are difficult to read.
static struct snd_soc_dapm_widget * snd_soc_dapm_new_dai()
{
...
^ template.reg = ...
| template.id = ...
(X) template.name = ...
| template.event = ...
| template.event_flags = ...
v template.kcontrol_news = ...
if (rtd->dai_link->num_params > 1) {
...
^ template.num_kcontrols = ...
(Y) template.kcontrol_news = ...
v ...
}
...
(Z) w = snd_soc_dapm_new_control_unlocked(..., &template);
}
And this function has error message, but not for all cases.
This patch (1) setups "template" in one place, and indicate error message
for all cases. This patch cleanup the code, but nothing changed for
meaning.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/871qr4tzro.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dapm_widget_set_power() (= X) is called only from
dapm_power_one_widget() (= Y), and total purpose of these functions are
calling dapm_seq_insert() (= a) accordingly for each widget.
(X) static void dapm_widget_set_power(...)
{
...
if (power)
(a) dapm_seq_insert(w, up_list, true);
else
(a) dapm_seq_insert(w, down_list, false);
}
(Y) static void dapm_power_one_widget(...)
{
..
switch (w->id) {
case snd_soc_dapm_pre:
(a) dapm_seq_insert(w, down_list, false);
break;
case snd_soc_dapm_post:
(a) dapm_seq_insert(w, up_list, true);
break;
default:
power = dapm_widget_power_check(w);
(X) dapm_widget_set_power(w, power, up_list, down_list);
break;
}
}
It should be more simple, but the code is unnecessarily complicated,
and difficult to read/understand. This patch merge these into one.
Link: https://lore.kernel.org/all/87tu42owdd.wl-kuninori.morimoto.gx@renesas.com/
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/8735bktzrx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch cleanup dapm_widget_set_power() comment, parenthesis,
and 100 chars. It has no meaning, nothing will be changed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/874jw0tzsh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently snd_soc_dapm_free_widget() is assuming input parameter is
non NULL. Thus, caller need to care about it.
This patch care it at snd_soc_dapm_free_widget().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/875yggtzsq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_dapm_add_path() is using local variable "widgets[]", but it is
same as path->node[].
This is no meaning and duplicate operation. This patch removes "widgets[]".
path->node[SND_SOC_DAPM_DIR_IN] = wsource;
path->node[SND_SOC_DAPM_DIR_OUT] = wsink;
widgets[SND_SOC_DAPM_DIR_IN] = wsource;
widgets[SND_SOC_DAPM_DIR_OUT] = wsink;
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/877d0wtzsx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current error handling on snd_soc_dapm_add_route() has some wastes.
It indicates *own* error message *only* for sink or source,
and return error directly at (A). OTOH, it has similar error message at
(B) which indicates *both* sink/source.
And more, (A) is using dev_err(), (B) is using dev_warn().
(B) is caring prefix, but (A) is not.
(X) int snd_soc_dapm_add_route(...)
{
...
if (wsource == NULL) {
(A) dev_err(...);
return -ENODEV;
}
if (wsink == NULL) {
(A) dev_err(...);
return -ENODEV;
}
...
ret = snd_soc_dapm_add_path(...);
if (ret)
(B) goto err;
return 0;
err:
(B) dev_warn(...);
return ret;
}
Above snd_soc_dapm_add_route() (= X) is called from
snd_soc_dapm_add_routes() (= Y).
(X) will indicate error message by itself, but (Y) will indicate
own error message at (C). (C) is duplicated.
(Y) int snd_soc_dapm_add_routes(...)
{
...
for (...) {
(X) int r = snd_soc_dapm_add_route(...);
if (r < 0) {
(C) dev_err(...);
ret = r;
}
...
}
...
}
This patch (1) merges these error message (= A,B) into one,
(2) use dev_err(), (3) remove duplicate error message (= C) from
snd_soc_dapm_add_routes().
By this patch, it will indicate error message like this.
- error message with prefix
- not found widget will have "(*)" mark
- it indicates [control] if exists.
ex)
[if no sink with control]
ASoC: Failed to add route SOURCE -> [CTRL] -> SINK(*)
[if no source without control]
ASoC: Failed to add route SOURCE(*) -> SINK
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/878rlctzt5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current ASoC has snd_soc_dapm_wcache, but its member is only
snd_soc_dapm_widget.
struct snd_soc_dapm_wcache {
struct snd_soc_dapm_widget *widget;
};
It is no meaning for now, and makes code unreadable.
This patch replace snd_soc_dapm_wcache to snd_soc_dapm_widget directly.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/87a65stztf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Delete the doubled word "for" in comments.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20221017141812.6867-1-dengshaomin@cdjrlc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
These are random cleanup for soc-dpam.c/h.
Basically, these are just cleanup, nothing changed.
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
All Intel drivers for cAVS platforms contain a sequence for S3 resume
which doesn't seem justified nor necessary. Forensic Git investigation
in internal repositories did not provide any rationale for the
implementation, and tests show no impact when those sequences are
removed.
This sequence was identified as problematic during a large HDaudio
cleanup where all programming sequences were revisited before
extensions are added.
|
|
Add protection against multiple open of the mtrace/coreN debugfs
nodes. This is not supported in the implementation, and this will
show up as unexpected behaviour of the interface, and potential
use of already freed memory.
Fixes: f4ea22f7aa75 ("ASoC: SOF: ipc4: Add support for mtrace log extraction")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221018121332.20802-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add mtl_mx98357_rt5682 driver data for Chrome Rex board support.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221017205728.210813-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Don't populate the read-only array ramp_base on the stack but
instead make it static const. Also makes the object code a
little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221018152928.942186-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Modify set tdm slot function to set ACP I2S controller slots
in tdm mode based on number of slots.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20221018122711.2559452-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It makes more sense to log the message before it is sent to the DSP.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221018133843.16958-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
By acking a received message we tell the DSP that we have processed the
message (reply or notification) and we are open to receive a new one.
The original implementation did this in a common code after the received
message got handled as reply or notification.
With right timing this opens up a small window when we have processed the
reply and let the other thread proceed to send a new message to the DSP,
which is allowed as the DSP is free to receive message.
But when the message is received and processed by the DSP and it wants to
send a reply it will still see that the previous message has not been
acked, so it fails to send a reply. Later the first reply got acked by the
kernel, but it is too late and the in-flight message got a timeout due to
firmware not responding (which it tried, but could not).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Before attempting to send a message to the DSP we need to check if the
downstream BUSY flag has been cleared by the firmware to avoid lost IPC
messages by the firmware.
This is required by a firmware which only acks the received message after
it has sent a reply to the host.
With a bad luck, the host would send a message before the firmware gets to
the clearing the flag and thus losing a message.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Read both registers as the first step in the interrupt handler to make
sure that we are handling the event which triggered the interrupt.
The delayed reading of the target request register might reflect incorrect
information about the reason why the interrupt was risen.
Note also that the IPC3 interrupt handler is implemented in this way also.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It makes more sense to log the message before it is sent to the DSP.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch cleanup dapm_widget_set_power() comment, parenthesis,
and 100 chars. It has no meaning, nothing will be changed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8oiowdk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently snd_soc_dapm_free_widget() is assuming input parameter is
non NULL. Thus, caller need to care about it.
This patch care it at snd_soc_dapm_free_widget().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wn8yowdr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_dapm_add_path() is using local variable "widgets[]", but it is
same as path->node[].
This is no meaning and duplicate operation. This patch removes "widgets[]".
path->node[SND_SOC_DAPM_DIR_IN] = wsource;
path->node[SND_SOC_DAPM_DIR_OUT] = wsink;
widgets[SND_SOC_DAPM_DIR_IN] = wsource;
widgets[SND_SOC_DAPM_DIR_OUT] = wsink;
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1teowdx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current error handling on snd_soc_dapm_add_route() has some wastes.
It indicates *own* error message *only* for sink or source,
and return error directly at (A). OTOH, it has similar error message at
(B) which indicates *both* sink/source.
And more, (A) is using dev_err(), (B) is using dev_warn().
(B) is caring prefix, but (A) is not.
(X) int snd_soc_dapm_add_route(...)
{
...
if (wsource == NULL) {
(A) dev_err(...);
return -ENODEV;
}
if (wsink == NULL) {
(A) dev_err(...);
return -ENODEV;
}
...
ret = snd_soc_dapm_add_path(...);
if (ret)
(B) goto err;
return 0;
err:
(B) dev_warn(...);
return ret;
}
Above snd_soc_dapm_add_route() (= X) is called from
snd_soc_dapm_add_routes() (= Y).
(X) will indicate error message by itself, but (Y) will indicate
own error message at (C). (C) is duplicated.
(Y) int snd_soc_dapm_add_routes(...)
{
...
for (...) {
(X) int r = snd_soc_dapm_add_route(...);
if (r < 0) {
(C) dev_err(...);
ret = r;
}
...
}
...
}
This patch (1) merges these error message (= A,B) into one,
(2) use dev_err(), (3) remove duplicate error message (= C) from
snd_soc_dapm_add_routes().
By this patch, it will indicate error message like this.
- error message with prefix
- not found widget will have "(*)" mark
- it indicates [control] if exists.
ex)
[if no sink with control]
ASoC: Failed to add route SOURCE -> [CTRL] -> SINK(*)
[if no source without control]
ASoC: Failed to add route SOURCE(*) -> SINK
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zgduowe5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current ASoC has snd_soc_dapm_wcache, but its member is only
snd_soc_dapm_widget.
struct snd_soc_dapm_wcache {
struct snd_soc_dapm_widget *widget;
};
It is no meaning for now, and makes code unreadable.
This patch replace snd_soc_dapm_wcache to snd_soc_dapm_widget directly.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qr6qayt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The flow contains surprising parts that seem to have been inspired by
the Skylake driver.
During a resume from S3, the state of the links prior to suspend
should not matter. One would have to assume that the links are powered
down anyways prior to suspend, and there is also no specific code that
turns links on unconditionally on resume.
Likewise, the snd_hdac_init_chip() routine will start the cmd_io
handling, and it's not clear why we should care about the state of the
DMA prior to suspend.
This patch removes these two sequences to simplify the flow.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221017204946.207986-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The same code was directly copied from the skylake driver where it was
already questionable. Remove and simplify the flow.
Tested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221017204946.207986-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit cce6c149eba3a ("ASoC: Intel: Skylake: add link management")
added a perfectly logical/symmetrical link handling for
'suspend_active' aka S0ix
However that commit also added a less obvious part, where during S3
resume the code will "turn off the links which are off before suspend"
as well as stop the cmd_io which is not started.
This sequence looks completely unnecessary and possibly wrong, remove it.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221017204946.207986-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Initial IPC4 tests used the same conventions as previous reference
closed-source firmware, but for MeteorLake the convention is the same
as previous SOF releases (sof-<platform>.ri). Only the prefix changes
to avoid confusions between IPC types.
This change has no impact on users since the firmware has not yet been
released.
Fixes: 064520e8aeaa2 ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221017204004.207446-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some NUC15 LAPBC710 devices don't expose the same DMI information as
the Intel reference, add additional entry in the match table.
BugLink: https://github.com/thesofproject/linux/issues/3885
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221017204054.207512-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Doug Brown <doug@schmorgal.com>:
This series adds devicetree support for the Wolfson WM8961 codec. The
first patch adds a schema, the second patch hooks it up in the code, and
the third patch allows it to be selected in Kconfig.
|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Two fixes are leading the way - one addresses the incorrect DMA mask
assignment (typo) at driver probe. The other, fixes a potential buffer
overflow when copying data received from firmware to kernel buffer.
However unlikely, the fix should still be there.
Then a range of patches providing the support for:
- AML with rt286 (machine board)
- KBL-R for rt298 (codec)
- KBL-R with rt298 (machine board)
- APL/KBL with da7219 (machine board)
- Addition of all the missing SKL-based PCI ids to core.c
Of the remaining changes, only one stands out - special case is provided
for "unsupported" IPCs. The driver supports a range of platforms,
however, on some generations given IPC may not be supported. Such call
shall not be treated as "invalid" - those are two different scenarios.
Everything else in the patchset is mostly a readability improvement:
spelling fixes and log messages issues, code simplification.
|
|
Merge series from Chancel Liu <chancel.liu@nxp.com>:
At a previous time, we have successfully created a virtual sound card
based on rpmsg. The sound card works under this mechanism Cortex-A core
tells the Cortex-M core the format, rate, channel, .etc configuration
of the PCM parameters and Cortex-M controls real hardware devices such
as SAI and DMA. From the view of Linux side, the sound card is bound to
a rpmsg channel through which it can access SAI.
Here these patches are introduced to create a new virtual sound card to
access MICFIL based on a new created rpmsg channel. It's easy to create
a new rpmsg channel for MICFIL through rpmsg name service announcment.
Also the other ASoC components bound to this rpmsg MICFIL sound card
will be registered with these patches.
If other sound cards using different hardware devices needs to be
created over rpmsg in the future, these patches can be referred.
|
|
Merge series from Siarhei Volkau <lis8215@gmail.com>:
The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master
The patchset improves:
- Exposes output stage (post mixer) gain control and makes it new
Master playback gain, DAC gain was the previous master.
However, no Master mute now.
- Exposes all mixer inputs (both Mics, LineIn and DAC) with their
gain controls.
- Exposes microphones widgets: single/differential input, boost.
Known issues:
- Bypass path enablement isn't applied immediately, for make
things going bit clock needs to be triggered for a bit,
e.g. by aplay dummy.wav
It might be a hardware bug, since the bit clock isn't
declared as required for codec operation.
Tested on:
- Ritmix RZX-27 (jz4725b).
- Ritmix RZX-50 (jz4755).
|
|
Merge series from Shang XiaoJing <shangxiaojing@huawei.com>:
Use DIV_ROUND_UP() instead of open-coding it, which intents and makes
it more clear what is going on for the casual reviewer.
|
|
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
This series adds machine board for max98927 codec present on some
Chromebook devices.
|
|
If SOUNDWIRE is enabled, then SND_SOC_SC7180 should depend on
SOUNDWIRE to prevent SOUNDWIRE=m and SND_SOC_SC7180=y, which causes
build errors:
s390-linux-ld: sound/soc/qcom/common.o: in function `qcom_snd_sdw_prepare':
common.c:(.text+0x140): undefined reference to `sdw_disable_stream'
s390-linux-ld: common.c:(.text+0x14a): undefined reference to `sdw_deprepare_stream'
s390-linux-ld: common.c:(.text+0x158): undefined reference to `sdw_prepare_stream'
s390-linux-ld: common.c:(.text+0x16a): undefined reference to `sdw_enable_stream'
s390-linux-ld: common.c:(.text+0x17c): undefined reference to `sdw_deprepare_stream'
s390-linux-ld: sound/soc/qcom/common.o: in function `qcom_snd_sdw_hw_free':
common.c:(.text+0x344): undefined reference to `sdw_disable_stream'
s390-linux-ld: common.c:(.text+0x34e): undefined reference to `sdw_deprepare_stream'
Fixes: 3bd975f3ae0a ("ASoC: qcom: sm8250: move some code to common")
Fixes: 9e3ecb5b1681 ("ASoC: qcom: sc7180: Add machine driver for sound card registration")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@quicinc.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Ajit Pandey <ajitp@codeaurora.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: stable@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20221015001228.18990-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If CONFIG_SND_SOC_TLV320ADC3XXX=y:
`.exit.text' referenced in section `.data' of sound/soc/codecs/tlv320adc3xxx.o: defined in discarded section `.exit.text' of sound/soc/codecs/tlv320adc3xxx.o
Fix this by wrapping the adc3xxx_i2c_remove() pointer in __exit_p().
Fixes: e9a3b57efd28fe88 ("ASoC: codec: tlv320adc3xxx: New codec driver")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/3225ba4cfe558d9380155e75385954dd21d4e7eb.1665909132.git.geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Microphone input can be single ended or differential, although
known SoCs with that codec expose MIC1P only.
Also there is 20dB mic boost in the Mic1 path.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-8-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
