| Age | Commit message (Collapse) | Author |
|---|
|
Pull io_uring fixes from Jens Axboe:
- Fix for a file ref leak for registered ring fds
- Turn the ->timeout_lock into a raw spinlock, as it nests under the
io-wq lock which is a raw spinlock as it's called from the scheduler
side
- Limit ring resizing to DEFER_TASKRUN for now. We will broaden this in
the future, but for now, ensure that it's only feasible on rings with
a single user
- Add sanity check for io-wq enqueuing
* tag 'io_uring-6.13-20241220' of git://git.kernel.dk/linux:
io_uring: check if iowq is killed before queuing
io_uring/register: limit ring resizing to DEFER_TASKRUN
io_uring: Fix registered ring file refcount leak
io_uring: make ctx->timeout_lock a raw spinlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some important, and small, fixes for USB and Thunderbolt
issues that have come up in the -rc releases. And some new device ids
for good measure. Included in here are:
- Much reported xhci bugfix for usb-storage devices (and other
devices as well, tripped me up on a video camera)
- thunderbolt fixes for some small reported issues
- new usb-serial device ids
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci: fix ring expansion regression in 6.13-rc1
xhci: Turn NEC specific quirk for handling Stop Endpoint errors generic
thunderbolt: Improve redrive mode handling
USB: serial: option: add Telit FE910C04 rmnet compositions
USB: serial: option: add MediaTek T7XX compositions
USB: serial: option: add Netprisma LCUK54 modules for WWAN Ready
USB: serial: option: add MeiG Smart SLM770A
USB: serial: option: add TCL IK512 MBIM & ECM
thunderbolt: Don't display nvm_version unless upgrade supported
thunderbolt: Add support for Intel Panther Lake-M/P
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"A fix for the remove path of the Rockchip driver, the code was just
clearly and obviously wrong"
* tag 'spi-fix-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rockchip-sfc: Fix error in remove progress
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"The recently added regulator-uv-survival-time-ms property was renamed
during the review of the series that added it, but unfortunately only
in the DT binding and not in the code that parses the binding.
This brings the code in line with the binding, if someone started
using the original name we can add compat support for it but there's
nothing upstream yet and it's a very niche feature so hopefully not"
* tag 'regulator-fix-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rename regulator-uv-survival-time-ms according to DT binding
|
|
Pull drm fixes from Dave Airlie:
"Probably the last pull before Christmas holidays, I'll still be around
for most of the time anyways, nothing too major in here, bunch of
amdgpu and i915 along with a smattering of fixes across the board.
core:
- fix FB dependency
- avoid div by 0 more in vrefresh
- maintainers update
display:
- fix DP tunnel error path
dma-buf:
- fix !DEBUG_FS
sched:
- docs warning fix
panel:
- collection of misc panel fixes
i915:
- Reset engine utilization buffer before registration
- Ensure busyness counter increases motonically
- Accumulate active runtime on gt reset
amdgpu:
- Disable BOCO when CONFIG_HOTPLUG_PCI_PCIE is not enabled
- scheduler job fixes
- IP version check fixes
- devcoredump fix
- GPUVM update fix
- NBIO 2.5 fix
udmabuf:
- fix memory leak on last export
- sealing fixes
ivpu:
- fix NULL pointer
- fix memory leak
- fix WARN"
* tag 'drm-fixes-2024-12-20' of https://gitlab.freedesktop.org/drm/kernel: (33 commits)
drm/sched: Fix drm_sched_fini() docu generation
accel/ivpu: Fix WARN in ivpu_ipc_send_receive_internal()
accel/ivpu: Fix memory leak in ivpu_mmu_reserved_context_init()
accel/ivpu: Fix general protection fault in ivpu_bo_list()
drm/amdgpu/nbio7.0: fix IP version check
drm/amd: Update strapping for NBIO 2.5.0
drm/amdgpu: Handle NULL bo->tbo.resource (again) in amdgpu_vm_bo_update
drm/amdgpu: fix amdgpu_coredump
drm/amdgpu/smu14.0.2: fix IP version check
drm/amdgpu/gfx12: fix IP version check
drm/amdgpu/mmhub4.1: fix IP version check
drm/amdgpu/nbio7.11: fix IP version check
drm/amdgpu/nbio7.7: fix IP version check
drm/amdgpu: don't access invalid sched
drm/amd: Require CONFIG_HOTPLUG_PCI_PCIE for BOCO
drm: rework FB_CORE dependency
drm/fbdev: Select FB_CORE dependency for fbdev on DMA and TTM
fbdev: Fix recursive dependencies wrt BACKLIGHT_CLASS_DEVICE
i915/guc: Accumulate active runtime on gt reset
i915/guc: Ensure busyness counter increases motonically
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fixes from Steven Rostedt:
- Fix possible overflow of mmapped ring buffer with bad offset
If the mmap() to the ring buffer passes in a start address that is
passed the end of the mmapped file, it is not caught and a
slab-out-of-bounds is triggered.
Add a check to make sure the start address is within the bounds
- Do not use TP_printk() to boot mapped ring buffers
As a boot mapped ring buffer's data may have pointers that map to the
previous boot's memory map, it is unsafe to allow the TP_printk() to
be used to read the boot mapped buffer's events. If a TP_printk()
points to a static string from within the kernel it will not match
the current kernel mapping if KASLR is active, and it can fault.
Have it simply print out the raw fields.
* tag 'trace-ringbuffer-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
trace/ring-buffer: Do not use TP_printk() formatting for boot mapped buffers
ring-buffer: Fix overflow in __rb_map_vma
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.13, please pull the following:
- Willow corrects the L2 cache line size on the Raspberry Pi 5 (2712) to
the correct value of 64 bytes
* tag 'arm-soc/for-6.13/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
Link: https://lore.kernel.org/r/20241217190547.868744-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V soc driver fixes for v6.13-rc4
A single fix for the Auto Update driver, where a mistake in array
indexing (accessing as a u32 rather than a u8) caused the driver to read
the wrong feature disable bits.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.13-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
Link: https://lore.kernel.org/r/20241218-suffrage-unfazed-fa0113072a42@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When we do sk_psock_verdict_apply->sk_psock_skb_ingress, an sk_msg will
be created out of the skb, and the rmem accounting of the sk_msg will be
handled by the skb.
For skmsgs in __SK_REDIRECT case of tcp_bpf_send_verdict, when redirecting
to the ingress of a socket, although we sk_rmem_schedule and add sk_msg to
the ingress_msg of sk_redir, we do not update sk_rmem_alloc. As a result,
except for the global memory limit, the rmem of sk_redir is nearly
unlimited. Thus, add sk_rmem_alloc related logic to limit the recv buffer.
Since the function sk_msg_recvmsg and __sk_psock_purge_ingress_msg are
used in these two paths. We use "msg->skb" to test whether the sk_msg is
skb backed up. If it's not, we shall do the memory accounting explicitly.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241210012039.1669389-3-zijianzhang@bytedance.com
|
|
When bpf_tcp_ingress() is called, the skmsg is being redirected to the
ingress of the destination socket. Therefore, we should charge its
receive socket buffer, instead of sending socket buffer.
Because sk_rmem_schedule() tests pfmemalloc of skb, we need to
introduce a wrapper and call it for skmsg.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241210012039.1669389-2-zijianzhang@bytedance.com
|
|
We are seeing a sparse warning in gcs_restore_signal():
arch/arm64/kernel/signal.c:1054:9: sparse: sparse: cast removes address space '__user' of expression
when storing the final GCSPR_EL0 value back into the register, caused by
the fact that write_sysreg_s() casts the value it writes to a u64 which
sparse sees as discarding the __userness of the pointer.
Avoid this by treating the address as an integer, casting to a pointer only
when using it to write to userspace.
While we're at it also inline gcs_signal_cap_valid() into it's one user
and make equivalent updates to gcs_signal_entry().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412082005.OBJ0BbWs-lkp@intel.com/
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241214-arm64-gcs-signal-sparse-v3-1-5e8d18fffc0c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.13-2024-12-18:
amdgpu:
- Disable BOCO when CONFIG_HOTPLUG_PCI_PCIE is not enabled
- scheduler job fixes
- IP version check fixes
- devcoredump fix
- GPUVM update fix
- NBIO 2.5 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218204637.2966198-1-alexander.deucher@amd.com
|
|
Treat slow-path TDP MMU faults as spurious if the access is allowed given
the existing SPTE to fix a benign warning (other than the WARN itself)
due to replacing a writable SPTE with a read-only SPTE, and to avoid the
unnecessary LOCK CMPXCHG and subsequent TLB flush.
If a read fault races with a write fault, fast GUP fails for any reason
when trying to "promote" the read fault to a writable mapping, and KVM
resolves the write fault first, then KVM will end up trying to install a
read-only SPTE (for a !map_writable fault) overtop a writable SPTE.
Note, it's not entirely clear why fast GUP fails, or if that's even how
KVM ends up with a !map_writable fault with a writable SPTE. If something
else is going awry, e.g. due to a bug in mmu_notifiers, then treating read
faults as spurious in this scenario could effectively mask the underlying
problem.
However, retrying the faulting access instead of overwriting an existing
SPTE is functionally correct and desirable irrespective of the WARN, and
fast GUP _can_ legitimately fail with a writable VMA, e.g. if the Accessed
bit in primary MMU's PTE is toggled and causes a PTE value mismatch. The
WARN was also recently added, specifically to track down scenarios where
KVM is unnecessarily overwrites SPTEs, i.e. treating the fault as spurious
doesn't regress KVM's bug-finding capabilities in any way. In short,
letting the WARN linger because there's a tiny chance it's due to a bug
elsewhere would be excessively paranoid.
Fixes: 1a175082b190 ("KVM: x86/mmu: WARN and flush if resolving a TDP MMU fault clears MMU-writable")
Reported-by: Lei Yang <leiyang@redhat.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219588
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218213611.3181643-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop KVM's arbitrary behavior of making DE_CFG.LFENCE_SERIALIZE read-only
for the guest, as rejecting writes can lead to guest crashes, e.g. Windows
in particular doesn't gracefully handle unexpected #GPs on the WRMSR, and
nothing in the AMD manuals suggests that LFENCE_SERIALIZE is read-only _if
it exists_.
KVM only allows LFENCE_SERIALIZE to be set, by the guest or host, if the
underlying CPU has X86_FEATURE_LFENCE_RDTSC, i.e. if LFENCE is guaranteed
to be serializing. So if the guest sets LFENCE_SERIALIZE, KVM will provide
the desired/correct behavior without any additional action (the guest's
value is never stuffed into hardware). And having LFENCE be serializing
even when it's not _required_ to be is a-ok from a functional perspective.
Fixes: 74a0e79df68a ("KVM: SVM: Disallow guest from changing userspace's MSR_AMD64_DE_CFG value")
Fixes: d1d93fa90f1a ("KVM: SVM: Add MSR-based feature support for serializing LFENCE")
Reported-by: Simon Pilkington <simonp.git@mailbox.org>
Closes: https://lore.kernel.org/all/52914da7-a97b-45ad-86a0-affdf8266c61@mailbox.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20241211172952.1477605-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use is_64_bit_hypercall() instead of is_64_bit_mode() to detect a 64-bit
hypercall when completing said hypercall. For guests with protected state,
e.g. SEV-ES and SEV-SNP, KVM must assume the hypercall was made in 64-bit
mode as the vCPU state needed to detect 64-bit mode is unavailable.
Hacking the sev_smoke_test selftest to generate a KVM_HC_MAP_GPA_RANGE
hypercall via VMGEXIT trips the WARN:
------------[ cut here ]------------
WARNING: CPU: 273 PID: 326626 at arch/x86/kvm/x86.h:180 complete_hypercall_exit+0x44/0xe0 [kvm]
Modules linked in: kvm_amd kvm ... [last unloaded: kvm]
CPU: 273 UID: 0 PID: 326626 Comm: sev_smoke_test Not tainted 6.12.0-smp--392e932fa0f3-feat #470
Hardware name: Google Astoria/astoria, BIOS 0.20240617.0-0 06/17/2024
RIP: 0010:complete_hypercall_exit+0x44/0xe0 [kvm]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl_run+0x2400/0x2720 [kvm]
kvm_vcpu_ioctl+0x54f/0x630 [kvm]
__se_sys_ioctl+0x6b/0xc0
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: b5aead0064f3 ("KVM: x86: Assume a 64-bit hypercall for guests with protected state")
Cc: stable@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20241128004344.4072099-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
On SNP-enabled system, VMRUN marks AVIC Backing Page as in-use while
the guest is running for both secure and non-secure guest. Any hypervisor
write to the in-use vCPU's AVIC backing page (e.g. to inject an interrupt)
will generate unexpected #PF in the host.
Currently, attempt to run AVIC guest would result in the following error:
BUG: unable to handle page fault for address: ff3a442e549cc270
#PF: supervisor write access in kernel mode
#PF: error_code(0x80000003) - RMP violation
PGD b6ee01067 P4D b6ee02067 PUD 10096d063 PMD 11c540063 PTE 80000001149cc163
SEV-SNP: PFN 0x1149cc unassigned, dumping non-zero entries in 2M PFN region: [0x114800 - 0x114a00]
...
Newer AMD system is enhanced to allow hypervisor to modify the backing page
for non-secure guest on SNP-enabled system. This enhancement is available
when the CPUID Fn8000_001F_EAX bit 30 is set (HvInUseWrAllowed).
This table describes AVIC support matrix w.r.t. SNP enablement:
| Non-SNP system | SNP system
-----------------------------------------------------
Non-SNP guest | AVIC Activate | AVIC Activate iff
| | HvInuseWrAllowed=1
-----------------------------------------------------
SNP guest | N/A | Secure AVIC
Therefore, check and disable AVIC in kvm_amd driver when the feature is not
available on SNP-enabled system.
See the AMD64 Architecture Programmer’s Manual (APM) Volume 2 for detail.
(https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/
programmer-references/40332.pdf)
Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20241104075845.7583-1-suravee.suthikulpanit@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.13-rc4:
- udma-buf fixes related to sealing.
- dma-buf build warning fix when debugfs is not enabled.
- Assorted drm/panel fixes.
- Correct error return in drm_dp_tunnel_mgr_create.
- Fix even more divide by zero in drm_mode_vrefresh.
- Fix FBDEV dependencies in Kconfig.
- Documentation fix for drm_sched_fini.
- IVPU NULL pointer, memory leak and WARN fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0763051-87b7-483e-89e0-a9f993383450@linux.intel.com
|
|
task work can be executed after the task has gone through io_uring
termination, whether it's the final task_work run or the fallback path.
In this case, task work will find ->io_wq being already killed and
null'ed, which is a problem if it then tries to forward the request to
io_queue_iowq(). Make io_queue_iowq() fail requests in this case.
Note that it also checks PF_KTHREAD, because the user can first close
a DEFER_TASKRUN ring and shortly after kill the task, in which case
->iowq check would race.
Cc: stable@vger.kernel.org
Fixes: 50c52250e2d74 ("block: implement async io_uring discard cmd")
Fixes: 773af69121ecc ("io_uring: always reissue from task_work context")
Reported-by: Will <willsroot@protonmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/63312b4a2c2bb67ad67b857d17a300e1d3b078e8.1734637909.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With recent netfs apis changes, the bytes written
value was not getting updated in /proc/fs/cifs/Stats.
Fix this by updating tcon->bytes in write operations.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: try the outer netns attribute in rtnl_get_peer_net()
- rust: net::phy fix module autoloading
Current release - new code bugs:
- phy: avoid undefined behavior in *_led_polarity_set()
- eth: octeontx2-pf: fix netdev memory leak in rvu_rep_create()
Previous releases - regressions:
- smc: check sndbuf_space again after NOSPACE flag is set in smc_poll
- ipvs: fix clamp() of ip_vs_conn_tab on small memory systems
- dsa: restore dsa_software_vlan_untag() ability to operate on
VLAN-untagged traffic
- eth:
- tun: fix tun_napi_alloc_frags()
- ionic: no double destroy workqueue
- idpf: trigger SW interrupt when exiting wb_on_itr mode
- rswitch: rework ts tags management
- team: fix feature exposure when no ports are present
Previous releases - always broken:
- core: fix repeated netlink messages in queue dump
- mdiobus: fix an OF node reference leak
- smc: check iparea_offset and ipv6_prefixes_cnt when receiving
proposal msg
- can: fix missed interrupts with m_can_pci
- eth: oa_tc6: fix infinite loop error when tx credits becomes 0"
* tag 'net-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
net: mctp: handle skb cleanup on sock_queue failures
net: mdiobus: fix an OF node reference leak
octeontx2-pf: fix error handling of devlink port in rvu_rep_create()
octeontx2-pf: fix netdev memory leak in rvu_rep_create()
psample: adjust size if rate_as_probability is set
netdev-genl: avoid empty messages in queue dump
net: dsa: restore dsa_software_vlan_untag() ability to operate on VLAN-untagged traffic
selftests: openvswitch: fix tcpdump execution
net: usb: qmi_wwan: add Quectel RG255C
net: phy: avoid undefined behavior in *_led_polarity_set()
netfilter: ipset: Fix for recursive locking warning
ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems
can: m_can: fix missed interrupts with m_can_pci
can: m_can: set init flag earlier in probe
rtnetlink: Try the outer netns attribute in rtnl_get_peer_net().
net: netdevsim: fix nsim_pp_hold_write()
idpf: trigger SW interrupt when exiting wb_on_itr mode
idpf: add support for SW triggered interrupts
qed: fix possible uninit pointer read in qed_mcp_nvm_info_populate()
net: ethernet: bgmac-platform: fix an OF node reference leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- mtk-sd: Cleanup the wakeup configuration in error/remove-path
- sdhci-tegra: Correct quirk for ADMA2 length
* tag 'mmc-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mtk-sd: disable wakeup in .remove() and in the error path of .probe()
mmc: sdhci-tegra: Remove SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC quirk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix regression in pwm-stm32 driver when converting to new waveform
support
Fabrice Gasnier found and fixed a regression I introduced with
v6.13-rc1 when converting the stm32 pwm driver to support the new
waveform stuff. On some hardware variants this completely broke the
driver"
* tag 'pwm/for-6.13-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Fix complementary output in round_waveform_tohw()
|
|
Pull smb server fixes from Steve French:
- Two fixes for better handling maximum outstanding requests
- Fix simultaneous negotiate protocol race
* tag 'v6.13-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: conn lock to serialize smb2 negotiate
ksmbd: fix broken transfers when exceeding max simultaneous operations
ksmbd: count all requests in req_running counter
|
|
If a PCIe port only supports a single speed, enabling bandwidth control
is pointless: There's no need to monitor autonomous speed changes, nor
can the speed be changed.
Not enabling it saves a small amount of memory and compute resources,
but also fixes a boot hang reported by Niklas: It occurs when enabling
bandwidth control on Downstream Ports of Intel JHL7540 "Titan Ridge 2018"
Thunderbolt controllers. The ports only support 2.5 GT/s in accordance
with USB4 v2 sec 11.2.1, so the present commit works around the issue.
PCIe r6.2 sec 8.2.1 prescribes that:
"A device must support 2.5 GT/s and is not permitted to skip support
for any data rates between 2.5 GT/s and the highest supported rate."
Consequently, bandwidth control is currently only disabled if a port
doesn't support higher speeds than 2.5 GT/s. However the Implementation
Note in PCIe r6.2 sec 7.5.3.18 cautions:
"It is strongly encouraged that software primarily utilize the
Supported Link Speeds Vector instead of the Max Link Speed field,
so that software can determine the exact set of supported speeds on
current and future hardware. This can avoid software being confused
if a future specification defines Links that do not require support
for all slower speeds."
In other words, future revisions of the PCIe Base Spec may allow gaps
in the Supported Link Speeds Vector. To be future-proof, don't just
check whether speeds above 2.5 GT/s are supported, but rather check
whether *more than one* speed is supported.
Fixes: 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Closes: https://lore.kernel.org/r/db8e457fcd155436449b035e8791a8241b0df400.camel@kernel.org
Link: https://lore.kernel.org/r/3564908a9c99fc0d2a292473af7a94ebfc8f5820.1734428762.git.lukas@wunner.de
Reported-by: Niklas Schnelle <niks@kernel.org>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jonathan Cameron <Jonthan.Cameron@huawei.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Supported Link Speeds Vector in the Link Capabilities 2 Register
indicates the *supported* link speeds. The Max Link Speed field in the
Link Capabilities Register indicates the *maximum* of those speeds.
pcie_get_supported_speeds() neglects to honor the Max Link Speed field and
will thus incorrectly deem higher speeds as supported. Fix it.
One user-visible issue addressed here is an incorrect value in the sysfs
attribute "max_link_speed".
But the main motivation is a boot hang reported by Niklas: Intel JHL7540
"Titan Ridge 2018" Thunderbolt controllers supports 2.5-8 GT/s speeds,
but indicate 2.5 GT/s as maximum. Ilpo recalls seeing this on more
devices. It can be explained by the controller's Downstream Ports
supporting 8 GT/s if an Endpoint is attached, but limiting to 2.5 GT/s
if the port interfaces to a PCIe Adapter, in accordance with USB4 v2
sec 11.2.1:
"This section defines the functionality of an Internal PCIe Port that
interfaces to a PCIe Adapter. [...]
The Logical sub-block shall update the PCIe configuration registers
with the following characteristics: [...]
Max Link Speed field in the Link Capabilities Register set to 0001b
(data rate of 2.5 GT/s only).
Note: These settings do not represent actual throughput. Throughput
is implementation specific and based on the USB4 Fabric performance."
The present commit is not sufficient on its own to fix Niklas' boot hang,
but it is a prerequisite: A subsequent commit will fix the boot hang by
enabling bandwidth control only if more than one speed is supported.
The GENMASK() macro used herein specifies 0 as lowest bit, even though
the Supported Link Speeds Vector ends at bit 1. This is done on purpose
to avoid a GENMASK(0, 1) macro if Max Link Speed is zero. That macro
would be invalid as the lowest bit is greater than the highest bit.
Ilpo has witnessed a zero Max Link Speed on Root Complex Integrated
Endpoints in particular, so it does occur in practice. (The Link
Capabilities Register is optional on RCiEPs per PCIe r6.2 sec 7.5.3.)
Fixes: d2bd39c0456b ("PCI: Store all PCIe Supported Link Speeds")
Closes: https://lore.kernel.org/r/70829798889c6d779ca0f6cd3260a765780d1369.camel@kernel.org
Link: https://lore.kernel.org/r/fe03941e3e1cc42fb9bf4395e302bff53ee2198b.1734428762.git.lukas@wunner.de
Reported-by: Niklas Schnelle <niks@kernel.org>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
With DEFER_TASKRUN, we know the ring can't be both waited upon and
resized at the same time. This is important for CQ resizing. Allowing SQ
ring resizing is more trivial, but isn't the interesting use case. Hence
limit ring resizing in general to DEFER_TASKRUN only for now. This isn't
a huge problem as CQ ring resizing is generally the most useful on
networking type of workloads where it can be hard to size the ring
appropriately upfront, and those should be using DEFER_TASKRUN for
better performance.
Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.")
fixed a netns UAF by manually enabled socket refcounting
(sk->sk_net_refcnt=1 and sock_inuse_add(net, 1)).
The reason the patch worked for that bug was because we now hold
references to the netns (get_net_track() gets a ref internally)
and they're properly released (internally, on __sk_destruct()),
but only because sk->sk_net_refcnt was set.
Problem:
(this happens regardless of CONFIG_NET_NS_REFCNT_TRACKER and regardless
if init_net or other)
Setting sk->sk_net_refcnt=1 *manually* and *after* socket creation is not
only out of cifs scope, but also technically wrong -- it's set conditionally
based on user (=1) vs kernel (=0) sockets. And net/ implementations
seem to base their user vs kernel space operations on it.
e.g. upon TCP socket close, the TCP timers are not cleared because
sk->sk_net_refcnt=1:
(cf. commit 151c9c724d05 ("tcp: properly terminate timers for kernel sockets"))
net/ipv4/tcp.c:
void tcp_close(struct sock *sk, long timeout)
{
lock_sock(sk);
__tcp_close(sk, timeout);
release_sock(sk);
if (!sk->sk_net_refcnt)
inet_csk_clear_xmit_timers_sync(sk);
sock_put(sk);
}
Which will throw a lockdep warning and then, as expected, deadlock on
tcp_write_timer().
A way to reproduce this is by running the reproducer from ef7134c7fc48
and then 'rmmod cifs'. A few seconds later, the deadlock/lockdep
warning shows up.
Fix:
We shouldn't mess with socket internals ourselves, so do not set
sk_net_refcnt manually.
Also change __sock_create() to sock_create_kern() for explicitness.
As for non-init_net network namespaces, we deal with it the best way
we can -- hold an extra netns reference for server->ssocket and drop it
when it's released. This ensures that the netns still exists whenever
we need to create/destroy server->ssocket, but is not directly tied to
it.
Fixes: ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.")
Cc: stable@vger.kernel.org
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Repeating automatically selected options in Kconfig files is redundant, so
let's delete repeated "select NETFS_SUPPORT" that was added accidentally.
Fixes: 69c3c023af25 ("cifs: Implement netfslib hooks")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
value
Replace default hardcoded value for cifsAttrs with ATTR_ARCHIVE macro
Use SMB2_LEASE_KEY_SIZE macro for leasekey size in smb2_lease_break
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Commit baf4afc5831438 ("drm/sched: Improve teardown documentation")
added a list of drm_sched_fini()'s problems. The list triggers htmldocs
warning (but renders correctly in htmldocs output):
Documentation/gpu/drm-mm:571: ./drivers/gpu/drm/scheduler/sched_main.c:1359: ERROR: Unexpected indentation.
Separate the list from the preceding paragraph by a blank line to fix
the warning. While at it, also end the aforementioned paragraph by a
colon.
Fixes: baf4afc58314 ("drm/sched: Improve teardown documentation")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20241108175655.6d3fcfb7@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
[phasta: Adjust commit message]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217034915.62594-1-bagasdotme@gmail.com
|
|
In get_uprobe_offset(), the call to procmap_query() use the constant
PROCMAP_QUERY_VMA_EXECUTABLE, even if PROCMAP_QUERY is not defined.
Define PROCMAP_QUERY_VMA_EXECUTABLE when PROCMAP_QUERY isn't.
Fixes: 4e9e07603ecd ("selftests/bpf: make use of PROCMAP_QUERY ioctl if available")
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20241218175724.578884-1-jmarchan@redhat.com
|
|
Move pm_runtime_set_active() to ivpu_pm_init() so when
ivpu_ipc_send_receive_internal() is executed before ivpu_pm_enable()
it already has correct runtime state, even if last resume was
not successful.
Fixes: 8ed520ff4682 ("accel/ivpu: Move set autosuspend delay to HW specific code")
Cc: stable@vger.kernel.org # v6.7+
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210130939.1575610-4-jacek.lawrynowicz@linux.intel.com
|
|
Add appropriate error handling to ensure all allocated resources are
released upon encountering an error.
Fixes: a74f4d991352 ("accel/ivpu: Defer MMU root page table allocation")
Cc: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210130939.1575610-3-jacek.lawrynowicz@linux.intel.com
|
|
Check if ctx is not NULL before accessing its fields.
Fixes: 37dee2a2f433 ("accel/ivpu: Improve buffer object debug logs")
Cc: stable@vger.kernel.org # v6.8
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210130939.1575610-2-jacek.lawrynowicz@linux.intel.com
|
|
Currently, LoongArch LLVM does not support the constraint "o" and no plan
to support it, it only supports the similar constraint "m", so change the
constraints from "nor" in the "else" case to arch-specific "nmr" to avoid
the build error such as "unexpected asm memory constraint" for LoongArch.
Fixes: 630301b0d59d ("selftests/bpf: Add basic USDT selftests")
Suggested-by: Weining Lu <luweining@loongson.cn>
Suggested-by: Li Chen <chenli@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: stable@vger.kernel.org
Link: https://llvm.org/docs/LangRef.html#supported-constraint-code-list
Link: https://github.com/llvm/llvm-project/blob/main/llvm/lib/Target/LoongArch/LoongArchISelDAGToDAG.cpp#L172
Link: https://lore.kernel.org/bpf/20241219111506.20643-1-yangtiezhu@loongson.cn
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.13-rc4
This includes following USB4/Thunderbolt fixes for v6.13-rc4:
- Add Intel Panther Lake PCI IDs
- Do not show nvm_version for retimers that are not supported
- Fix redrive mode handling.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.13-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Improve redrive mode handling
thunderbolt: Don't display nvm_version unless upgrade supported
thunderbolt: Add support for Intel Panther Lake-M/P
|
|
The regulator bindings don't document regulator-uv-survival-time-ms, but
the more descriptive regulator-uv-less-critical-window-ms instead.
Looking back at v3[1] and v4[2] of the series adding the support,
the property was indeed renamed between these patch series, but
unfortunately the rename only made it into the DT bindings with the
driver code still using the old name.
Let's therefore rename the property in the driver code to follow suit.
This will break backwards compatibility, but there are no upstream
device trees using the property and we never documented the old name
of the property anyway. ¯\_(ツ)_/¯"
[1]: https://lore.kernel.org/all/20231025084614.3092295-7-o.rempel@pengutronix.de/
[2]: https://lore.kernel.org/all/20231026144824.4065145-5-o.rempel@pengutronix.de/
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://patch.msgid.link/20241218-regulator-uv-survival-time-ms-rename-v1-1-6cac9c3c75da@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, we don't use the return value from sock_queue_rcv_skb, which
means we may leak skbs if a message is not successfully queued to a
socket.
Instead, ensure that we're freeing the skb where the sock hasn't
otherwise taken ownership of the skb by adding checks on the
sock_queue_rcv_skb() to invoke a kfree on failure.
In doing so, rather than using the 'rc' value to trigger the
kfree_skb(), use the skb pointer itself, which is more explicit.
Also, add a kunit test for the sock delivery failure cases.
Fixes: 4a992bbd3650 ("mctp: Implement message fragmentation & reassembly")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20241218-mctp-next-v2-1-1c1729645eaa@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fwnode_find_mii_timestamper() calls of_parse_phandle_with_fixed_args()
but does not decrement the refcount of the obtained OF node. Add an
of_node_put() call before returning from the function.
This bug was detected by an experimental static analysis tool that I am
developing.
Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241218035106.1436405-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Reset engine utilization buffer before registration (Umesh Nerlige Ramappa)
- Ensure busyness counter increases motonically (Umesh Nerlige Ramappa)
- Accumulate active runtime on gt reset (Umesh Nerlige Ramappa)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z2LppUZudGKXwWjW@linux
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following series contains two fixes for Netfilter/IPVS:
1) Possible build failure in IPVS on systems with less than 512MB
memory due to incorrect use of clamp(), from David Laight.
2) Fix bogus lockdep nesting splat with ipset list:set type,
from Phil Sutter.
netfilter pull request 24-12-19
* tag 'nf-24-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: Fix for recursive locking warning
ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems
====================
Link: https://patch.msgid.link/20241218234137.1687288-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Unregister the devlink port when register_netdev() fails.
Fixes: 9ed0343f561e ("octeontx2-pf: Add devlink port support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20241217052326.1086191-2-harshit.m.mogalapalli@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When rvu_rep_devlink_port_register() fails, free_netdev(ndev) for this
incomplete iteration before going to "exit:" label.
Fixes: 9ed0343f561e ("octeontx2-pf: Add devlink port support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20241217052326.1086191-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If PSAMPLE_ATTR_SAMPLE_PROBABILITY flag is to be sent, the available
size for the packet data has to be adjusted accordingly.
Also, check the error code returned by nla_put_flag.
Fixes: 7b1b2b60c63f ("net: psample: allow using rate as probability")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241217113739.3929300-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Empty netlink responses from do() are not correct (as opposed to
dump() where not dumping anything is perfectly fine).
We should return an error if the target object does not exist,
in this case if the netdev is down it has no queues.
Fixes: 6b6171db7fc8 ("netdev-genl: Add netlink framework functions for queue")
Reported-by: syzbot+0a884bc2d304ce4af70f@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241218022508.815344-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
VLAN-untagged traffic
Robert Hodaszi reports that locally terminated traffic towards
VLAN-unaware bridge ports is broken with ocelot-8021q. He is describing
the same symptoms as for commit 1f9fc48fd302 ("net: dsa: sja1105: fix
reception from VLAN-unaware bridges").
For context, the set merged as "VLAN fixes for Ocelot driver":
https://lore.kernel.org/netdev/20240815000707.2006121-1-vladimir.oltean@nxp.com/
was developed in a slightly different form earlier this year, in January.
Initially, the switch was unconditionally configured to set OCELOT_ES0_TAG
when using ocelot-8021q, regardless of port operating mode.
This led to the situation where VLAN-unaware bridge ports would always
push their PVID - see ocelot_vlan_unaware_pvid() - a negligible value
anyway - into RX packets. To strip this in software, we would have needed
DSA to know what private VID the switch chose for VLAN-unaware bridge
ports, and pushed into the packets. This was implemented downstream, and
a remnant of it remains in the form of a comment mentioning
ds->ops->get_private_vid(), as something which would maybe need to be
considered in the future.
However, for upstream, it was deemed inappropriate, because it would
mean introducing yet another behavior for stripping VLAN tags from
VLAN-unaware bridge ports, when one already existed (ds->untag_bridge_pvid).
The latter has been marked as obsolete along with an explanation why it
is logically broken, but still, it would have been confusing.
So, for upstream, felix_update_tag_8021q_rx_rule() was developed, which
essentially changed the state of affairs from "Felix with ocelot-8021q
delivers all packets as VLAN-tagged towards the CPU" into "Felix with
ocelot-8021q delivers all packets from VLAN-aware bridge ports towards
the CPU". This was done on the premise that in VLAN-unaware mode,
there's nothing useful in the VLAN tags, and we can avoid introducing
ds->ops->get_private_vid() in the DSA receive path if we configure the
switch to not push those VLAN tags into packets in the first place.
Unfortunately, and this is when the trainwreck started, the selftests
developed initially and posted with the series were not re-ran.
dsa_software_vlan_untag() was initially written given the assumption
that users of this feature would send _all_ traffic as VLAN-tagged.
It was only partially adapted to the new scheme, by removing
ds->ops->get_private_vid(), which also used to be necessary in
standalone ports mode.
Where the trainwreck became even worse is that I had a second opportunity
to think about this, when the dsa_software_vlan_untag() logic change
initially broke sja1105, in commit 1f9fc48fd302 ("net: dsa: sja1105: fix
reception from VLAN-unaware bridges"). I did not connect the dots that
it also breaks ocelot-8021q, for pretty much the same reason that not
all received packets will be VLAN-tagged.
To be compatible with the optimized Felix control path which runs
felix_update_tag_8021q_rx_rule() to only push VLAN tags when useful (in
VLAN-aware mode), we need to restore the old dsa_software_vlan_untag()
logic. The blamed commit introduced the assumption that
dsa_software_vlan_untag() will see only VLAN-tagged packets, assumption
which is false. What corrupts RX traffic is the fact that we call
skb_vlan_untag() on packets which are not VLAN-tagged in the first
place.
Fixes: 93e4649efa96 ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges")
Reported-by: Robert Hodaszi <robert.hodaszi@digi.com>
Closes: https://lore.kernel.org/netdev/20241215163334.615427-1-robert.hodaszi@digi.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241216135059.1258266-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
idpf: trigger SW interrupt when exiting wb_on_itr mode
Joshua Hay says:
This patch series introduces SW triggered interrupt support for idpf,
then uses said interrupt to fix a race condition between completion
writebacks and re-enabling interrupts.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: trigger SW interrupt when exiting wb_on_itr mode
idpf: add support for SW triggered interrupts
====================
Link: https://patch.msgid.link/20241217225715.4005644-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the way tcpdump is executed by:
- Using the right variable for the namespace. Currently the use of the
empty "ns" makes the command fail.
- Waiting until it starts to capture to ensure the interesting traffic
is caught on slow systems.
- Using line-buffered output to ensure logs are available when the test
is paused with "-p". Otherwise the last chunk of data might only be
written when tcpdump is killed.
Fixes: 74cc26f416b9 ("selftests: openvswitch: add interface support")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20241217211652.483016-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
split_huge_pages_write() does not handle the case where strsep finds no
delimiter in the given string and sets the input buffer to NULL, which
allows this reproducer to trigger a protection fault.
Link: https://lkml.kernel.org/r/20241216042752.257090-2-leocstone@gmail.com
Signed-off-by: Leo Stone <leocstone@gmail.com>
Reported-by: syzbot+8a3da2f1bbf59227c289@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8a3da2f1bbf59227c289
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It was recently noticed that set_codetag_empty() might be used not only to
mark NULL alloctag references as empty to avoid warnings but also to reset
valid tags (in clear_page_tag_ref()). Since set_codetag_empty() is
defined as NOOP for CONFIG_MEM_ALLOC_PROFILING_DEBUG=n, such use of
set_codetag_empty() leads to subtle bugs. Fix set_codetag_empty() for
CONFIG_MEM_ALLOC_PROFILING_DEBUG=n to reset the tag reference.
Link: https://lkml.kernel.org/r/20241130001423.1114965-2-surenb@google.com
Fixes: a8fc28dad6d5 ("alloc_tag: introduce clear_page_tag_ref() helper function")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/lkml/20241124074318.399027-1-00107082@163.com/
Cc: David Wang <00107082@163.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
