summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-05selftests: forwarding: fix error message in learning_testVladimir Oltean
When packets are not received, they aren't received on $host1_if, so the message talking about the second host not receiving them is incorrect. Fix it. Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-05selftests: forwarding: fix learning_test when h1 supports IFF_UNICAST_FLTVladimir Oltean
The first host interface has by default no interest in receiving packets MAC DA de:ad:be:ef:13:37, so it might drop them before they hit the tc filter and this might confuse the selftest. Enable promiscuous mode such that the filter properly counts received packets. Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-05selftests: forwarding: fix flood_unicast_test when h2 supports IFF_UNICAST_FLTVladimir Oltean
As mentioned in the blamed commit, flood_unicast_test() works by checking the match count on a tc filter placed on the receiving interface. But the second host interface (host2_if) has no interest in receiving a packet with MAC DA de:ad:be:ef:13:37, so its RX filter drops it even before the ingress tc filter gets to be executed. So we will incorrectly get the message "Packet was not flooded when should", when in fact, the packet was flooded as expected but dropped due to an unrelated reason, at some other layer on the receiving side. Force h2 to accept this packet by temporarily placing it in promiscuous mode. Alternatively we could either deliver to its MAC address or use tcpdump_start, but this has the fewest complications. This fixes the "flooding" test from bridge_vlan_aware.sh and bridge_vlan_unaware.sh, which calls flood_test from the lib. Fixes: 236dd50bf67a ("selftests: forwarding: Add a test for flooded traffic") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-05bpf: Omit superfluous address family check in __bpf_skc_lookupTobias Klauser
family is only set to either AF_INET or AF_INET6 based on len. In all other cases we return early. Thus the check against AF_UNSPEC can be omitted. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220630082618.15649-1-tklauser@distanz.ch
2022-07-05Merge branch 'af_unix-fix-regression-by-the-per-netns-hash-table-series'Paolo Abeni
Kuniyuki Iwashima says: ==================== af_unix: Fix regression by the per-netns hash table series. The series 6dd4142fb5a9 ("Merge branch 'af_unix-per-netns-socket-hash'") replaced a global hash table with per-netns tables, which caused regression reported in the links below. [0][1] When a pathname socket is visible, any socket with the same type has to be able to connect to it even in different netns. The series puts all sockets into each namespace's hash table, making it impossible to look up a visible socket in different netns. On the other hand, while dumping sockets, they are filtered by netns. To keep such code simple, let's add a new global hash table only for pathname sockets and link them with sk_bind_node. Then we can keep all sockets in each per-netns table and look up pathname sockets via the global table. [0]: https://lore.kernel.org/netdev/B2AA3091-796D-475E-9A11-0021996E1C00@linux.ibm.com/ [1]: https://lore.kernel.org/netdev/5fb8d86f-b633-7552-8ba9-41e42f07c02a@gmail.com/ Changes: v3: * 1st: Update changelog s/named/pathname/ * 2nd: Fix checkpatch.pl CHECK by --strict option v2: https://lore.kernel.org/netdev/20220702014447.93746-1-kuniyu@amazon.com/ * Add selftest v1: https://lore.kernel.org/netdev/20220701072519.96097-1-kuniyu@amazon.com/ ==================== Link: https://lore.kernel.org/r/20220702154818.66761-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-05selftests: net: af_unix: Test connect() with different netns.Kuniyuki Iwashima
This patch add a test that checks connect()ivity between two sockets: unnamed socket -> bound socket * SOCK_STREAM or SOCK_DGRAM * pathname or abstract * same or different netns Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-05af_unix: Put pathname sockets in the global hash table.Kuniyuki Iwashima
Commit cf2f225e2653 ("af_unix: Put a socket into a per-netns hash table.") accidentally broke user API for pathname sockets. A socket was able to connect() to a pathname socket whose file was visible even if they were in different network namespaces. The commit puts all sockets into a per-netns hash table. As a result, connect() to a pathname socket in a different netns fails to find it in the caller's per-netns hash table and returns -ECONNREFUSED even when the task can view the peer socket file. We can reproduce this issue by: Console A: # python3 >>> from socket import * >>> s = socket(AF_UNIX, SOCK_STREAM, 0) >>> s.bind('test') >>> s.listen(32) Console B: # ip netns add test # ip netns exec test sh # python3 >>> from socket import * >>> s = socket(AF_UNIX, SOCK_STREAM, 0) >>> s.connect('test') Note when dumping sockets by sock_diag, procfs, and bpf_iter, they are filtered only by netns. In other words, even if they are visible and connect()able, all sockets in different netns are skipped while iterating sockets. Thus, we need a fix only for finding a peer pathname socket. This patch adds a global hash table for pathname sockets, links them with sk_bind_node, and uses it in unix_find_socket_byinode(). By doing so, we can keep sockets in per-netns hash tables and dump them easily. Thanks to Sachin Sant and Leonard Crestez for reports, logs and a reproducer. Fixes: cf2f225e2653 ("af_unix: Put a socket into a per-netns hash table.") Reported-by: Sachin Sant <sachinp@linux.ibm.com> Reported-by: Leonard Crestez <cdleonard@gmail.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Tested-by: Leonard Crestez <cdleonard@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-04Merge tag 'linux-can-fixes-for-5.19-20220704' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== can 2022-07-04 The 1st patch is by Oliver Hartkopp, targets the BCM CAN protocol and converts a costly synchronize_rcu() to call_rcu() to fix a performance regression. Srinivas Neeli's patch for the xilinx_can driver drops the brp limit down to 1, as only the pre-production silicon have an issue with a brp of 1. The next patch is by Duy Nguyen and fixes the data transmission on R-Car V3U SoCs in the rcar_canfd driver. Rhett Aultman's patch fixes a DMA memory leak in the gs_usb driver. Liang He's patch removes an extra of_node_get() in the grcan driver. The next 2 patches are by me, target the m_can driver and fix the timestamp handling used for peripheral devices like the tcan4x5x. Jimmy Assarsson contributes 3 patches for the kvaser_usb driver and fixes CAN clock and bit timing related issues. The remaining 5 patches target the mcp251xfd driver. Thomas Kopp contributes 2 patches to improve the workaround for broken CRC when reading the TBC register. 3 patches by me add a missing hrtimer_cancel() during the ndo_stop() callback, and fix the reading of the Device ID register. * tag 'linux-can-fixes-for-5.19-20220704' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversion can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read dev_id can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel() can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on TBC register can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for mcp2517fd can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits can: m_can: m_can_chip_config(): actually enable internal timestamping can: grcan: grcan_probe(): remove extra of_node_get() can: gs_usb: gs_usb_open/close(): fix memory leak can: rcar_canfd: Fix data transmission failed on R-Car V3U Revert "can: xilinx_can: Limit CANFD brp to 2" can: bcm: use call_rcu() instead of costly synchronize_rcu() ==================== Link: https://lore.kernel.org/r/20220704122613.1551119-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-04Merge tag 'soc-fixes-5.19-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Another set of minor patches for Arm DTS files and soc specific drivers: - More reference counting bug fixes for DT nodes, and other trivial code fixes - Multiple code fixes for the Arm SCMI firmware driver to improve compatibility with firmware implementations. - A patch series for at91 to address power management issues from using the wrong DT compatible properties. - A series of patches to fix pad settings for NXP imx8mp to leave the configuration untouched from the boot loader - Additional DT fixes for qualcomm and NXP platforms - A boot time fix for stm32mp15 DT - Konrad Dybcio becomes an additional reviewer for the Qualcomm platforms" * tag 'soc-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) soc: qcom: smem: use correct format characters ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15 ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board ARM: dts: stm32: use the correct clock source for CEC on stm32mp151 ARM: dts: stm32: fix pwr regulators references to use scmi soc: ixp4xx/npe: Fix unused match warning ARM: at91: pm: Mark at91_pm_secure_init as __init ARM: at91: fix soc detection for SAM9X60 SiPs ARM: dts: at91: sama5d2_icp: fix eeprom compatibles ARM: dts: at91: sam9x60ek: fix eeprom compatible and size ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt ARM: at91: pm: use proper compatible for sama5d2's rtc arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API firmware: arm_scmi: Fix response size warning for OPTEE transport arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings ...
2022-07-04Merge tag 'stm32-dt-for-v5.19-fixes-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.19, round 2 Highlights: ----------- -Fixes STM32MP15: - Add missing usbh clock and fix clk order for usbh to avoid PLL issue. - Fix SCMI version: use scmi regulator and update missing SCMI clocks to be able to correcly boot. * tag 'stm32-dt-for-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15 ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board ARM: dts: stm32: use the correct clock source for CEC on stm32mp151 ARM: dts: stm32: fix pwr regulators references to use scmi Link: https://lore.kernel.org/r/1259e082-a3a4-96a5-ec9c-05dbb893a746@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-04soc: qcom: smem: use correct format charactersBill Wendling
When compiling with -Wformat, clang emits the following warnings: drivers/soc/qcom/smem.c:847:41: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] dev_err(smem->dev, "bad host %hu\n", remote_host); ~~~ ^~~~~~~~~~~ %u ./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err' dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__) ~~~ ^~~~~~~~~~~ ./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap' _p_func(dev, fmt, ##__VA_ARGS__); \ ~~~ ^~~~~~~~~~~ drivers/soc/qcom/smem.c:852:47: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] dev_err(smem->dev, "duplicate host %hu\n", remote_host); ~~~ ^~~~~~~~~~~ %u ./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err' dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__) ~~~ ^~~~~~~~~~~ ./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap' _p_func(dev, fmt, ##__VA_ARGS__); \ ~~~ ^~~~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct one and change type of remote_host to "u16" to match with other types. Signed-off-by: Bill Wendling <morbo@google.com> Tested-by: Justin Stitt <jstitt007@gmail.com> Reviewed-by: Justin Stitt <jstitt007@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-04Merge tag 'asoc-fix-v5.19-rc3' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.19 A collection of fixes for v5.19, quite large but nothing major - a good chunk of it is more stuff that was identified by mixer-test regarding event generation.
2022-07-04ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)Egor Vorontsov
The patch applies the same quirks used for SC-01 at firmware v1.1.0 to the ones running v1.0.0, with respect to hard-coded sample rates. I got two more units and successfully tested the patch series with both firmwares. The support is now complete (not accounting ASIO). Signed-off-by: Egor Vorontsov <sdoregor@sdore.me> Link: https://lore.kernel.org/r/20220627100041.2861494-2-sdoregor@sdore.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-04ALSA: usb-audio: Add quirk for Fiero SC-01Egor Vorontsov
Fiero SC-01 is a USB sound card with two mono inputs and a single stereo output. The inputs are composed into a single stereo stream. The device uses a vendor-provided driver on Windows and does not work at all without it. The driver mostly provides ASIO functionality, but also alters the way the sound card is queried for sample rates and clocks. ALSA queries those failing with an EPIPE (same as Windows 10 does). Presumably, the vendor-provided driver does not query it at all, simply matching by VID:PID. Thus, I consider this a buggy firmware and adhere to a set of fixed endpoint quirks instead. The soundcard has an internal clock. Implicit feedback mode is required for the playback. I have updated my device to v1.1.0 from a Windows 10 VM using a vendor- provided binary prior to the development, hoping for it to just begin working. The device provides no obvious way to downgrade the firmware, and regardless, there's no binary available for v1.0.0 anyway. Thus, I will be getting another unit to extend the patch with support for that. Expected to be a simple copy-paste of the existing one, though. There were no previous reports of that device in context of Linux anywhere. Other issues have been reported though, but that's out of the scope. Signed-off-by: Egor Vorontsov <sdoregor@sdore.me> Link: https://lore.kernel.org/r/20220627100041.2861494-1-sdoregor@sdore.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-04ALSA: hda/realtek: Add quirk for Clevo L140PUTim Crawford
Fixes headset detection on Clevo L140PU. Signed-off-by: Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220624144109.3957-1-tcrawford@system76.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-04ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devicesJohn Veness
Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that the audio stream doesn't sound mono. Also fix initial stream alignment, so that left and right channels are in the correct order. Signed-off-by: John Veness <john-linux@pelago.org.uk> Link: https://lore.kernel.org/r/20220624140757.28758-1-john-linux@pelago.org.uk Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-04can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversionMarc Kleine-Budde
In mcp251xfd_register_get_dev_id() the device ID register is read with handcrafted SPI transfers. As all registers, this register is in little endian. Further it is not naturally aligned in struct mcp251xfd_map_buf_nocrc::data. However after the transfer the register content is converted from big endian to CPU endianness not taking care of being unaligned. Fix the conversion by converting from little endian to CPU endianness taking the unaligned source into account. Side note: So far the register content is 0x0 on all mcp251xfd compatible chips, and is only used for an informative printk. Link: https://lore.kernel.org/all/20220627092859.809042-1-mkl@pengutronix.de Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read ↵Marc Kleine-Budde
dev_id The device ID register is 32 bits wide. The driver uses incorrectly the size of a pointer to a u32 to calculate the length of the SPI transfer. This results in a read of 2 registers on 64 bit platforms. This is no problem on the Linux side, as the RX buffer of the SPI transfer is large enough. In the mpc251xfd chip this results in the read of an undocumented register. So far no problems were observed. Fix the length of the SPI transfer to read the device ID register only. Link: https://lore.kernel.org/all/20220616094914.244440-1-mkl@pengutronix.de Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel()Marc Kleine-Budde
In commit 169d00a25658 ("can: mcp251xfd: add TX IRQ coalescing support") software based TX coalescing was added to the driver. The key idea is to keep the TX complete IRQ disabled for some time after processing it and re-enable later by a hrtimer. When bringing the interface down, this timer has to be stopped. Add the missing hrtimer_cancel() of the tx_irq_time hrtimer to mcp251xfd_stop(). Link: https://lore.kernel.org/all/20220620143942.891811-1-mkl@pengutronix.de Fixes: 169d00a25658 ("can: mcp251xfd: add TX IRQ coalescing support") Cc: stable@vger.kernel.org # v5.18 Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on ↵Thomas Kopp
TBC register The mcp251xfd compatible chips have an erratum ([1], [2]), where the received CRC doesn't match the calculated CRC. In commit c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") the following workaround was implementierend. - If a CRC read error on the TBC register is detected and the first byte is 0x00 or 0x80, the most significant bit of the first byte is flipped and the CRC is calculated again. - If the CRC now matches, the _original_ data is passed to the reader. For now we assume transferred data was OK. New investigations and simulations indicate that the CRC send by the device is calculated on correct data, and the data is incorrectly received by the SPI host controller. Use flipped instead of original data and update workaround description in mcp251xfd_regmap_crc_read(). [1] mcp2517fd: DS80000792C: "Incorrect CRC for certain READ_CRC commands" [2] mcp2518fd: DS80000789C: "Incorrect CRC for certain READ_CRC commands" Link: https://lore.kernel.org/all/DM4PR11MB53901D49578FE265B239E55AFB7C9@DM4PR11MB5390.namprd11.prod.outlook.com Fixes: c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") Cc: stable@vger.kernel.org Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com> [mkl: split into 2 patches, update patch description and documentation] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for ↵Thomas Kopp
mcp2517fd The mcp251xfd compatible chips have an erratum ([1], [2]), where the received CRC doesn't match the calculated CRC. In commit c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") the following workaround was implementierend. - If a CRC read error on the TBC register is detected and the first byte is 0x00 or 0x80, the most significant bit of the first byte is flipped and the CRC is calculated again. - If the CRC now matches, the _original_ data is passed to the reader. For now we assume transferred data was OK. Measurements on the mcp2517fd show that the workaround is applicable not only of the lowest byte is 0x00 or 0x80, but also if 3 least significant bits are set. Update check on 1st data byte and workaround description accordingly. [1] mcp2517fd: DS80000792C: "Incorrect CRC for certain READ_CRC commands" [2] mcp2518fd: DS80000789C: "Incorrect CRC for certain READ_CRC commands" Link: https://lore.kernel.org/all/DM4PR11MB53901D49578FE265B239E55AFB7C9@DM4PR11MB5390.namprd11.prod.outlook.com Fixes: c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") Cc: stable@vger.kernel.org Reported-by: Pavel Modilaynen <pavel.modilaynen@volvocars.com> Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com> [mkl: split into 2 patches, update patch description and documentation] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: kvaser_usb: kvaser_usb_leaf: fix bittiming limitsJimmy Assarsson
Use correct bittiming limits depending on device. For devices based on USBcanII, Leaf M32C or Leaf i.MX28. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Fixes: b4f20130af23 ("can: kvaser_usb: add support for Kvaser Leaf v2 and usb mini PCIe") Fixes: f5d4abea3ce0 ("can: kvaser_usb: Add support for the USBcan-II family") Link: https://lore.kernel.org/all/20220603083820.800246-4-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> [mkl: remove stray netlink.h include] [mkl: keep struct can_bittiming_const kvaser_usb_flexc_bittiming_const in kvaser_usb_hydra.c] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regressionJimmy Assarsson
The firmware of M32C based Leaf devices expects bittiming parameters calculated for 16MHz clock. Since we use the actual clock frequency of the device, the device may end up with wrong bittiming parameters, depending on user requested parameters. This regression affects M32C based Leaf devices with non-16MHz clock. Fixes: fb12797ab1fe ("can: kvaser_usb: get CAN clock frequency from device") Link: https://lore.kernel.org/all/20220603083820.800246-3-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_infoJimmy Assarsson
Unify and move compile-time known information into new struct kvaser_usb_driver_info, in favor of run-time checks. All Kvaser USBcanII supports listen-only mode and error counter reporting. Link: https://lore.kernel.org/all/20220603083820.800246-2-extja@kvaser.com Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> [mkl: move struct kvaser_usb_driver_info into kvaser_usb_core.c] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04net: hns: Fix spelling mistakes in comments.Zhang Jiaming
Fix spelling of 'waitting' in comments. remove unnecessary space of 'MDIO_COMMAND_REG 's'. Signed-off-by: Zhang Jiaming <jiaming@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04ibmvnic: Properly dispose of all skbs during a failover.Rick Lindsley
During a reset, there may have been transmits in flight that are no longer valid and cannot be fulfilled. Resetting and clearing the queues is insufficient; each skb also needs to be explicitly freed so that upper levels are not left waiting for confirmation of a transmit that will never happen. If this happens frequently enough, the apparent backlog will cause TCP to begin "congestion control" unnecessarily, culminating in permanently decreased throughput. Fixes: d7c0ef36bde03 ("ibmvnic: Free and re-allocate scrqs when tx/rx scrqs change") Tested-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Rick Lindsley <ricklind@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04Merge branch 'nfp-vlan-strip-and-insert'David S. Miller
Simon Horman says: ==================== nfp: support VLAN strip and insert this series adds support to the NFP driver for HW offload of both: * RX VLAN ctag/stag strip * TX VLAN ctag insert ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04nfp: support TX VLAN ctag insertDiana Wang
Add support for TX VLAN ctag insert which may be configured via ethtool. e.g. # ethtool -K $DEV tx-vlan-offload on The NIC supplies VLAN insert information as packet metadata. The fields of this VLAN metadata are gotten from sk_buff, including vlan_proto and vlan tag. Configuration control bit NFP_NET_CFG_CTRL_TXVLAN_V2 is to signal availability of ctag-insert features of the firmware. NFDK is used to communicate via PCIE to NFP-3800 based NICs while NFD3 is used for other NICs supported by the NFP driver. The metadata format on tx side of NFD3 is different from NFDK. This feature is not currently implemented for NFDK. Signed-off-by: Diana Wang <na.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04nfp: support RX VLAN ctag/stag stripDiana Wang
Add support for RX VLAN ctag/stag strip which may be configured via ethtool. e.g. # ethtool -K $DEV rx-vlan-offload on # ethtool -K $DEV rx-vlan-stag-hw-parse on Ctag-stripped and stag-stripped cannot be enabled at the same time because currently the kernel supports only one layer of VLAN stripping. The NIC supplies VLAN strip information as packet metadata. The fields of this VLAN metadata are: * strip flag: 1 for stripped; 0 for unstripped * tci: VLAN TCI ID * tpid: 1 for ETH_P_8021AD; 0 for ETH_P_8021Q Configuration control bits NFP_NET_CFG_CTRL_RXVLAN_V2 and NFP_NET_CFG_CTRL_RXQINQ are to signal availability of ctag-strip and stag-strip features of the firmware. Signed-off-by: Diana Wang <na.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bitsMarc Kleine-Budde
In commit 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") the RX path for peripheral devices was switched to RX-offload. Received CAN frames are pushed to RX-offload together with a timestamp. RX-offload is designed to handle overflows of the timestamp correctly, if 32 bit timestamps are provided. The timestamps of m_can core are only 16 bits wide. So this patch shifts them to full 32 bit before passing them to RX-offload. Link: https://lore.kernel.org/all/20220612211410.4081390-1-mkl@pengutronix.de Fixes: 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") Cc: <stable@vger.kernel.org> # 5.13 Cc: Torin Cooper-Bennun <torin@maxiluxsystems.com> Reviewed-by: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: m_can: m_can_chip_config(): actually enable internal timestampingMarc Kleine-Budde
In commit df06fd678260 ("can: m_can: m_can_chip_config(): enable and configure internal timestamps") the timestamping in the m_can core should be enabled. In peripheral mode, the RX'ed CAN frames, TX compete frames and error events are sorted by the timestamp. The above mentioned commit however forgot to enable the timestamping. Add the missing bits to enable the timestamp counter to the write of the Timestamp Counter Configuration register. Link: https://lore.kernel.org/all/20220612212708.4081756-1-mkl@pengutronix.de Fixes: df06fd678260 ("can: m_can: m_can_chip_config(): enable and configure internal timestamps") Cc: <stable@vger.kernel.org> # 5.13 Cc: Torin Cooper-Bennun <torin@maxiluxsystems.com> Reviewed-by: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: grcan: grcan_probe(): remove extra of_node_get()Liang He
In grcan_probe(), of_find_node_by_path() has already increased the refcount. There is no need to call of_node_get() again, so remove it. Link: https://lore.kernel.org/all/20220619070257.4067022-1-windhl@126.com Fixes: 1e93ed26acf0 ("can: grcan: grcan_probe(): fix broken system id check for errata workaround needs") Cc: stable@vger.kernel.org # v5.18 Cc: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: gs_usb: gs_usb_open/close(): fix memory leakRhett Aultman
The gs_usb driver appears to suffer from a malady common to many USB CAN adapter drivers in that it performs usb_alloc_coherent() to allocate a number of USB request blocks (URBs) for RX, and then later relies on usb_kill_anchored_urbs() to free them, but this doesn't actually free them. As a result, this may be leaking DMA memory that's been used by the driver. This commit is an adaptation of the techniques found in the esd_usb2 driver where a similar design pattern led to a memory leak. It explicitly frees the RX URBs and their DMA memory via a call to usb_free_coherent(). Since the RX URBs were allocated in the gs_can_open(), we remove them in gs_can_close() rather than in the disconnect function as was done in esd_usb2. For more information, see the 928150fad41b ("can: esd_usb2: fix memory leak"). Link: https://lore.kernel.org/all/alpine.DEB.2.22.394.2206031547001.1630869@thelappy Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: stable@vger.kernel.org Signed-off-by: Rhett Aultman <rhett.aultman@samsara.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: rcar_canfd: Fix data transmission failed on R-Car V3UDuy Nguyen
On R-Car V3U, this driver should use suitable register offset instead of other SoCs' one. Otherwise, data transmission failed on R-Car V3U. Fixes: 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC") Link: https://lore.kernel.org/all/20220704074611.957191-1-yoshihiro.shimoda.uh@renesas.com Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04Merge branch 'smsc95xx-deadlock'David S. Miller
Lukas Wunner says: ==================== Deadlock no more in LAN95xx Second attempt at fixing a runtime resume deadlock in the LAN95xx USB driver: In short, the driver isn't using the "nopm" register accessors in portions of its runtime resume path, causing a deadlock. I'm fixing that by auto-detecting whether nopm accessors shall be used, instead of having to explicitly call them wherever it's necessary. As a byproduct, code size shrinks significantly (see diffstat below). Back in April I submitted a first attempt which was rejected by Alan Stern: https://lore.kernel.org/all/6710d8c18ff54139cdc538763ba544187c5a0cee.1651041411.git.lukas@wunner.de/ That approach only detected whether a PM callback is running concurrently, not whether the access is performed by the PM callback. I've come up with a different approach which should resolve the objection (see patch [1/3]). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04usbnet: smsc95xx: Clean up unnecessary BUG_ON() upon register accessLukas Wunner
smsc95xx_read_reg() and smsc95xx_write_reg() call BUG_ON() if the struct usbnet pointer passed in is NULL. The functions have just been amended to dereference the pointer on entry. So the kernel now oopses if the pointer is NULL, eliminating the need for an explicit BUG_ON(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04usbnet: smsc95xx: Clean up nopm handlingLukas Wunner
The LAN95xx driver has just been amended to auto-detect whether the _nopm variant of usbnet_read_cmd() / usbnet_write_cmd() shall be used. Drop all the now unnecessary open coding of that distinction. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04usbnet: smsc95xx: Fix deadlock on runtime resumeLukas Wunner
Commit 05b35e7eb9a1 ("smsc95xx: add phylib support") amended smsc95xx_resume() to call phy_init_hw(). That function waits for the device to runtime resume even though it is placed in the runtime resume path, causing a deadlock. The problem is that phy_init_hw() calls down to smsc95xx_mdiobus_read(), which never uses the _nopm variant of usbnet_read_cmd(). Commit b4df480f68ae ("usbnet: smsc95xx: add reset_resume function with reset operation") causes a similar deadlock on resume if the device was already runtime suspended when entering system sleep: That's because the commit introduced smsc95xx_reset_resume(), which calls down to smsc95xx_reset(), which neglects to use _nopm accessors. Fix by auto-detecting whether a device access is performed by the suspend/resume task_struct and use the _nopm variant if so. This works because the PM core guarantees that suspend/resume callbacks are run in task context. Stacktrace for posterity: INFO: task kworker/2:1:49 blocked for more than 122 seconds. Workqueue: usb_hub_wq hub_event schedule rpm_resume __pm_runtime_resume usb_autopm_get_interface usbnet_read_cmd __smsc95xx_read_reg __smsc95xx_phy_wait_not_busy __smsc95xx_mdio_read smsc95xx_mdiobus_read __mdiobus_read mdiobus_read smsc_phy_reset phy_init_hw smsc95xx_resume usb_resume_interface usb_resume_both usb_runtime_resume __rpm_callback rpm_callback rpm_resume __pm_runtime_resume usb_autoresume_device hub_event process_one_work Fixes: b4df480f68ae ("usbnet: smsc95xx: add reset_resume function with reset operation") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v3.16+ Cc: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04net: phy: broadcom: Add support for BCM53128 internal PHYsKurt Kanzenbach
Add support for BCM53128 internal PHYs. These support interrupts as well as statistics. Therefore, enable the Broadcom PHY driver for them. Tested on BCM53128 switch using the mainline b53 DSA driver. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04dt-bindings: net: dsa: renesas,rzn1-a5psw: add interrupts descriptionClément Léger
Describe the switch interrupts (dlr, switch, prp, hub, pattern) which are connected to the GIC. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04selftest: net: bridge mdb add/del entry to port that is downCasper Andersson
Tests that permanent mdb entries can be added/deleted on ports with state down. Signed-off-by: Casper Andersson <casper.casan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04net: ipconfig: use strscpy to replace strlcpyXueBing Chen
The strlcpy should not be used because it doesn't limit the source length. Preferred is strscpy. Signed-off-by: XueBing Chen <chenxuebing@jari.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04Revert "can: xilinx_can: Limit CANFD brp to 2"Srinivas Neeli
This reverts commit 05ca14fdb6fe65614e0652d03e44b02748d25af7. On early silicon engineering samples observed bit shrinking issue when we use brp as 1. Hence updated brp_min as 2. As in production silicon this issue is fixed, so reverting the patch. Link: https://lore.kernel.org/all/20220609082433.1191060-2-srinivas.neeli@xilinx.com Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04Merge branch 'netdev-docs'David S. Miller
Jakub Kicinski says: ==================== docs: netdev: document more of our rules The patch series length limit and reverse xmas tree are not documented. Add those, and a tl;dr section summarizing how we differ. v2: improve the series length blurb (Andrew) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04docs: netdev: add a cheat sheet for the rulesJakub Kicinski
Summarize the rules we see broken most often and which may be less familiar to kernel devs who are used to working outside of netdev. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04docs: netdev: document reverse xmas treeJakub Kicinski
Similarly to the 15 patch rule the reverse xmas tree is not documented. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04docs: netdev: document that patch series length limitJakub Kicinski
We had been asking people to avoid massive patch series but it does not appear in the FAQ. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04Merge branch 'mlxsw-unified-bridge-conversion-part-6'David S. Miller
Ido Schimmel says: ==================== mlxsw: Unified bridge conversion - part 6/6 This is the sixth and final part of the conversion of mlxsw to the unified bridge model. It transitions the last bits of functionality that were under firmware's responsibility in the legacy model to the driver. The last patches flip the driver to the unified bridge model and clean up code that was used to make the conversion easier to review. Patchset overview: Patch #1 sets the egress VID for known unicast packets. For multicast packets, the egress VID is configured using the MPE table. See commit 8c2da081c8b8 ("mlxsw: spectrum_fid: Configure egress VID classification for multicast"). Patch #2 configures the VNI to FID classification that is used during decapsulation. Patch #3 configures ingress router interface (RIF) in FID classification records, so that when a packet reaches the router block, its ingress RIF is known. Care is taken to configure this in all the different flows (e.g., RIF set on a FID, {Port, VID} joins a FID that already has a RIF etc.). Patch #4 configures the egress VID for routed packets. For such packets, the egress VID is not set by the MPE table or by an FDB record at the egress bridge, but instead by a dedicated table that maps {Egress RIF, Egress port} to a VID. Patch #5 removes VID configuration from RIF creation as in the unified bridge model firmware no longer needs it. Patch #6 sets the egress FID to use in RIF configuration so that the device knows using which FID to bridge the packet after routing. Patches #7-#9 add a new 802.1Q family and associated VLAN RIFs. In the unified bridge model, we no longer need to emulate 802.1Q FIDs using 802.1D FIDs as VNI can be associated with both. Patches #10-#11 finally flip the driver to the unified bridge model. Patches #12-#13 clean up code that was used to make the conversion easier to review. v2: * Fix build failure [1] in patch #1. [1] https://lore.kernel.org/netdev/20220630201709.6e66a1bb@kernel.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04mlxsw: spectrum_fid: Remove '_ub_' indication from structures and definesAmit Cohen
Some structures and defines were added with '_ub_' indication, as there were equivalent objects for the legacy model. Now when the legacy model is not used anymore, remove the '_ub_' indication. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04mlxsw: spectrum_fid: Remove flood_index() from FID operation structureAmit Cohen
The flood_index() function is not needed anymore, as in the unified bridge model the flood index is calculated using 'mid_base' and 'fid_offset'. Remove this function. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 00:41:57 +0000