| Age | Commit message (Collapse) | Author |
|---|
|
OPAL firmware provides the facility for some groups of sensors to be
enabled/disabled at runtime to give the user the option of using the
system resources for collecting these sensors or not.
For example, on POWER9 systems, the On Chip Controller (OCC) gathers
various system and chip level sensors and maintains their values in
main memory.
This patch provides support for enabling/disabling the sensor groups
like power, temperature, current and voltage.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
[stewart@linux.vnet.ibm.com: Commit message]
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Adds support to enable/disable a sensor group at runtime. This
can be used to select the sensor groups that needs to be copied to
main memory by OCC. Sensor groups like power, temperature, current,
voltage, frequency, utilization can be enabled/disabled at runtime.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Export pnv_idle_states and nr_pnv_idle_states so that its accessible to
cpuidle driver. Use properties from pnv_idle_states structure for powernv
cpuidle_init.
Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Device-tree parsing happens twice, once while deciding idle state to be
used for hotplug and once during cpuidle init. Hence, parsing the device
tree and caching it will reduce code duplication. Parsing code has been
moved to pnv_parse_cpuidle_dt() from pnv_probe_idle_states(). In addition
to the properties in the device tree the number of available states is
also required.
Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Some of the event counters are overloaded which makes it very
difficult to interpret their values.
Counter 0 is supposed to report CB1 interrupts but it can also count
PMU_INT_WAITING_CHARGER events.
Counter 1 is supposed to report GPIO interrupts but it can also count
other events (depending upon the value of the PMU_INT_ADB bit).
Disambiguate these statistics with dedicated counters for GPIO and
CB1 interrupts.
Comments in the MkLinux source code say that the type 0 and type 1
interrupts are model-specific. Label them as "unknown".
This change to the contents of /proc/pmu/interrupts is by necessity
visible in userland. However, packages which interact with the PMU
(that is, pbbuttonsd, pmac-utils and pmud) don't open this file.
AFAIK, user software has no need to poll these counters.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Replace an open-coded ffs() with the function call.
Simplify an if-else cascade using a switch statement.
Correct a typo and an indentation issue.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Now that the PowerMac via-pmu driver supports m68k PowerBooks,
switch over to that driver and remove the via-pmu68k driver.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Don't load the via-pmu68k driver on early PowerBooks. The M50753 PMU
device found in those models was never supported by this driver.
Attempting to load the driver usually causes a boot hang.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
At present, CONFIG_ADB_PMU depends on CONFIG_PPC_PMAC. When this gets
relaxed to CONFIG_PPC_PMAC || CONFIG_MAC, those Kconfig symbols with
implicit deps on PPC_PMAC will need explicit deps. Add them now.
No functional change.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Put #ifdefs around the Open Firmware, xmon, interrupt dispatch,
battery and suspend code. Add the necessary interrupt handling to
support m68k PowerBooks.
The pmu_kind value is available to userspace using the
PMU_IOC_GET_MODEL ioctl. It is not clear yet what hardware classes
are be needed to describe m68k PowerBook models, so pmu_kind is given
the provisional value PMU_UNKNOWN.
To find out about the hardware, user programs can use /proc/bootinfo
or /proc/hardware, or send the PMU_GET_VERSION command using /dev/adb.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
On most PowerPC Macs, the PMU driver uses the shift register and
IO port B from a single VIA chip.
On 68k and early PowerPC PowerBooks, the driver uses the shift register
from one VIA chip together with IO port B from another.
Replace via with via1 and via2 to accommodate this. For the
CONFIG_PPC_PMAC case, set via1 = via2 so there is no change.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
On 68k Macs, the via/vias pointer can't be used to determine whether
the PMU driver has been initialized. For portability, add a new state
to indicate that via_find_pmu() succeeded.
After via_find_pmu() executes, testing vias == NULL is equivalent to
testing via == NULL. Replace these tests with pmu_state == uninitialized
which is simpler and more consistent. No functional change.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The shift register interrupt flag gets cleared in via_pmu_interrupt()
and once again in pmu_sr_intr(). Fix this theoretical race condition.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add missing in_8() accessors to init_pmu() and pmu_sr_intr().
This fixes several sparse warnings:
drivers/macintosh/via-pmu.c:536:29: warning: dereference of noderef expression
drivers/macintosh/via-pmu.c:537:33: warning: dereference of noderef expression
drivers/macintosh/via-pmu.c:1455:17: warning: dereference of noderef expression
drivers/macintosh/via-pmu.c:1456:69: warning: dereference of noderef expression
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The pmu_init() function has the __init qualifier, but the ops struct
that holds a pointer to it does not. This causes a build warning.
The driver works fine because the pointer is only dereferenced early.
The function is so small that there's negligible benefit from using
the __init qualifier. Remove it to fix the warning, consistent with
the other ADB drivers.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
mmu_init_secondary() calls ppc44x_pin_tlb() which is marked __init,
leading to a warning:
The function mmu_init_secondary() references
the function __init ppc44x_pin_tlb().
There's no CPU hotplug support on 44x so mmu_init_secondary() will
only be called at boot. Therefore we should mark it as __init.
Signed-off-by: Alexey Spirkov <alexeis@astrosoft.ru>
[mpe: Flesh out change log details]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Paul Menzel reported that kmemleak was producing reports such as:
unreferenced object 0xc0000000f8b80000 (size 16384):
comm "init", pid 1, jiffies 4294937416 (age 312.240s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d997deb7>] __pud_alloc+0x80/0x190
[<0000000087f2e8a3>] move_page_tables+0xbac/0xdc0
[<00000000091e51c2>] shift_arg_pages+0xc0/0x210
[<00000000ab88670c>] setup_arg_pages+0x22c/0x2a0
[<0000000060871529>] load_elf_binary+0x41c/0x1648
[<00000000ecd9d2d4>] search_binary_handler.part.11+0xbc/0x280
[<0000000034e0cdd7>] __do_execve_file.isra.13+0x73c/0x940
[<000000005f953a6e>] sys_execve+0x58/0x70
[<000000009700a858>] system_call+0x5c/0x70
Indicating that a PUD was being leaked.
However what's really happening is that kmemleak is not able to
recognise the references from the PGD to the PUD, because they are not
fully qualified pointers.
We can confirm that in xmon, eg:
Find the task struct for pid 1 "init":
0:mon> P
task_struct ->thread.ksp PID PPID S P CMD
c0000001fe7c0000 c0000001fe803960 1 0 S 13 systemd
Dump virtual address 0 to find the PGD:
0:mon> dv 0 c0000001fe7c0000
pgd @ 0xc0000000f8b01000
Dump the memory of the PGD:
0:mon> d c0000000f8b01000
c0000000f8b01000 00000000f8b90000 0000000000000000 |................|
c0000000f8b01010 0000000000000000 0000000000000000 |................|
c0000000f8b01020 0000000000000000 0000000000000000 |................|
c0000000f8b01030 0000000000000000 00000000f8b80000 |................|
^^^^^^^^^^^^^^^^
There we can see the reference to our supposedly leaked PUD. But
because it's missing the leading 0xc, kmemleak won't recognise it.
We can confirm it's still in use by translating an address that is
mapped via it:
0:mon> dv 7fff94000000 c0000001fe7c0000
pgd @ 0xc0000000f8b01000
pgdp @ 0xc0000000f8b01038 = 0x00000000f8b80000 <--
pudp @ 0xc0000000f8b81ff8 = 0x00000000037c4000
pmdp @ 0xc0000000037c5ca0 = 0x00000000fbd89000
ptep @ 0xc0000000fbd89000 = 0xc0800001d5ce0386
Maps physical address = 0x00000001d5ce0000
Flags = Accessed Dirty Read Write
The fix is fairly simple. We need to tell kmemleak to ignore PUD
allocations and never report them as leaks. We can also tell it not to
scan the PGD, because it will never find pointers in there. However it
will still notice if we allocate a PGD and then leak it.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Split asm/tlbflush.h into:
asm/nohash/tlbflush.h
asm/book3s/32/tlbflush.h
asm/book3s/64/tlbflush.h (already existing)
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
asm/tlbflush.h is only needed for:
- using functions xxx_flush_tlb_xxx()
- using MMU_NO_CONTEXT
- including asm-generic/pgtable.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
mmu-44x.h doesn't need asm/page.h if PAGE_SHIFT are replaced by CONFIG_PPC_XX_PAGES
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Remove superflous includes and add missing ones
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
PPC_PIN_SIZE is specific to the 44x and is defined in mmu.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
set_breakpoint() is only used in process.c so make it static
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Files not using fixmap consts or functions don't need asm/fixmap.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
files not using feature fixup don't need asm/feature-fixups.h
files using feature fixup need asm/feature-fixups.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Only include linux/stringify.h is files using __stringify()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch moves ASM_CONST() and stringify_in_c() into
dedicated asm-const.h, then cleans all related inclusions.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: asm-compat.h should include asm-const.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Files not using cpu_has_feature() don't need cpu_has_feature.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
page.h doesn't need kdump.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This delay was in the very first OPAL console commit 6.5 years ago,
and came from the vio hvc driver. The firmware console has hardened
sufficiently to remove it.
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The RAW console does not need writes to be atomic, so relax
opal_put_chars to be able to do partial writes, and implement an
_atomic variant which does not take a spinlock. This API is used
in xmon, so the less locking that is used, the better chance there
is that a crash can be debugged.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
OPAL console writes do not have to synchronously flush firmware /
hardware buffers unless they are going through the udbg path.
Remove the unconditional flushing from opal_put_chars. Flush if
there was no space in the buffer as an optimisation (callers loop
waiting for success in that case). udbg flushing is moved to
udbg_opal_putc.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
opal_put_chars deals with partial writes because in OPALv1,
opal_console_write_buffer_space did not work correctly. That firmware
is not supported.
This reworks the opal_put_chars code to no longer deal with partial
writes by turning them into full writes. Partial write handling is still
supported in terms of what gets returned to the caller, but it may not
go to the console atomically. A warning message is printed in this
case.
This allows console flushing to be moved out of the opal_write_lock
spinlock. That could cause the lock to be held for long periods if the
console is busy (especially if it was being spammed by firmware),
which is dangerous because the lock is taken by xmon to debug the
system. Flushing outside the lock improves the situation a bit.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
A new console flushing firmware API was introduced to replace event
polling loops, and implemented in opal-kmsg with affddff69c55e
("powerpc/powernv: Add a kmsg_dumper that flushes console output on
panic"), to flush the console in the panic path.
The OPAL console driver has other situations where interrupts are off
and it needs to flush the console synchronously. These still use a
polling loop.
So move the opal-kmsg flush code to opal_flush_console, and use the
new function in opal-kmsg and opal_put_chars.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Use the more refined and tested event polling loop from opal_put_chars
as the fallback console flush in the opal-kmsg path. This loop is used
by the console driver today, whereas the opal-kmsg fallback is not
likely to have been used for years.
Use WARN_ONCE rather than a printk when the fallback is invoked to
prepare for moving the console flush into a common function.
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
OPAL_CONSOLE_FLUSH is documented as being able to return OPAL_BUSY,
so implement the standard OPAL_BUSY handling for it.
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The OPAL console driver does not delay in case it gets OPAL_BUSY or
OPAL_BUSY_EVENT from firmware.
It can't yet be made to sleep because it is called under spinlock,
but it can be changed to the standard OPAL_BUSY loop form, and a
delay added to keep it from hitting the firmware too frequently.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The intention here is to consume and discard the remaining buffer
upon error. This works if there has not been a previous partial write.
If there has been, then total_len is no longer total number of bytes
to copy. total_len is always "bytes left to copy", so it should be
added to written bytes.
This code may not be exercised any more if partial writes will not be
hit, but this is a small bugfix before a larger change.
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
handler
Fixes: 8034f715f ("powernv/opal-dump: Convert to irq domain")
Converts all the return explicit number to a more proper IRQ_HANDLED,
which looks proper incase of interrupt handler returning case.
Here, It also removes error message like "nobody cared" which was
getting unveiled while returning -1 or 0 from handler.
Signed-off-by: Mukesh Ojha <mukesh02@linux.vnet.ibm.com>
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Moves the return value check of 'opal_dump_info' to a proper place which
was previously unnecessarily filling all the dump info even on failure.
Signed-off-by: Mukesh Ojha <mukesh02@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Since commit dc3106690b20 ("powerpc: tm: Always use fp_state and
vr_state to store live registers") tm_reclaim_thread() doesn't use the
parameter anymore, both callers have to bother getting it as they have
no need for a struct thread_info either.
Just remove it and adjust the callers.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In commit eb5c3f1c8647 ("powerpc: Always save/restore checkpointed regs
during treclaim/trecheckpoint") __tm_recheckpoint was modified to no
longer take the second parameter 'unsigned long orig_msr' as part of a
TM rewrite to simplify the reclaiming/recheckpointing process.
There is a comment in the asm file where the function is delcared which
has an incorrect prototype with the 'orig_msr' parameter.
This patch corrects the comment.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch reworked selftest memcmp_64 so that memcmp selftest can
cover more test cases.
It adds testcases for:
- memcmp over 4K bytes size.
- s1/s2 with different/random offset on 16 bytes boundary.
- enter/exit_vmx_ops pairness.
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
[mpe: Add -maltivec to fix build on some toolchains]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch is based on the previous VMX patch on memcmp().
To optimize ppc64 memcmp() with VMX instruction, we need to think about
the VMX penalty brought with: If kernel uses VMX instruction, it needs
to save/restore current thread's VMX registers. There are 32 x 128 bits
VMX registers in PPC, which means 32 x 16 = 512 bytes for load and store.
The major concern regarding the memcmp() performance in kernel is KSM,
who will use memcmp() frequently to merge identical pages. So it will
make sense to take some measures/enhancement on KSM to see whether any
improvement can be done here. Cyril Bur indicates that the memcmp() for
KSM has a higher possibility to fail (unmatch) early in previous bytes
in following mail.
https://patchwork.ozlabs.org/patch/817322/#1773629
And I am taking a follow-up on this with this patch.
Per some testing, it shows KSM memcmp() will fail early at previous 32
bytes. More specifically:
- 76% cases will fail/unmatch before 16 bytes;
- 83% cases will fail/unmatch before 32 bytes;
- 84% cases will fail/unmatch before 64 bytes;
So 32 bytes looks a better choice than other bytes for pre-checking.
The early failure is also true for memcmp() for non-KSM case. With a
non-typical call load, it shows ~73% cases fail before first 32 bytes.
This patch adds a 32 bytes pre-checking firstly before jumping into VMX
operations, to avoid the unnecessary VMX penalty. It is not limited to
KSM case. And the testing shows ~20% improvement on memcmp() average
execution time with this patch.
And note the 32B pre-checking is only performed when the compare size
is long enough (>=4K currently) to allow VMX operation.
The detail data and analysis is at:
https://github.com/justdoitqd/publicFiles/blob/master/memcmp/README.md
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch add VMX primitives to do memcmp() in case the compare size
is equal or greater than 4K bytes. KSM feature can benefit from this.
Test result with following test program(replace the "^>" with ""):
------
># cat tools/testing/selftests/powerpc/stringloops/memcmp.c
>#include <malloc.h>
>#include <stdlib.h>
>#include <string.h>
>#include <time.h>
>#include "utils.h"
>#define SIZE (1024 * 1024 * 900)
>#define ITERATIONS 40
int test_memcmp(const void *s1, const void *s2, size_t n);
static int testcase(void)
{
char *s1;
char *s2;
unsigned long i;
s1 = memalign(128, SIZE);
if (!s1) {
perror("memalign");
exit(1);
}
s2 = memalign(128, SIZE);
if (!s2) {
perror("memalign");
exit(1);
}
for (i = 0; i < SIZE; i++) {
s1[i] = i & 0xff;
s2[i] = i & 0xff;
}
for (i = 0; i < ITERATIONS; i++) {
int ret = test_memcmp(s1, s2, SIZE);
if (ret) {
printf("return %d at[%ld]! should have returned zero\n", ret, i);
abort();
}
}
return 0;
}
int main(void)
{
return test_harness(testcase, "memcmp");
}
------
Without this patch (but with the first patch "powerpc/64: Align bytes
before fall back to .Lshort in powerpc64 memcmp()." in the series):
4.726728762 seconds time elapsed ( +- 3.54%)
With VMX patch:
4.234335473 seconds time elapsed ( +- 2.63%)
There is ~+10% improvement.
Testing with unaligned and different offset version (make s1 and s2 shift
random offset within 16 bytes) can archieve higher improvement than 10%..
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Some old tool chains don't know about instructions like vcmpequd.
This patch adds .long macro for vcmpequd and vcmpequb, which is
a preparation to optimize ppc64 memcmp with VMX instructions.
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently memcmp() 64bytes version in powerpc will fall back to .Lshort
(compare per byte mode) if either src or dst address is not 8 bytes aligned.
It can be opmitized in 2 situations:
1) if both addresses are with the same offset with 8 bytes boundary:
memcmp() can compare the unaligned bytes within 8 bytes boundary firstly
and then compare the rest 8-bytes-aligned content with .Llong mode.
2) If src/dst addrs are not with the same offset of 8 bytes boundary:
memcmp() can align src addr with 8 bytes, increment dst addr accordingly,
then load src with aligned mode and load dst with unaligned mode.
This patch optmizes memcmp() behavior in the above 2 situations.
Tested with both little/big endian. Performance result below is based on
little endian.
Following is the test result with src/dst having the same offset case:
(a similar result was observed when src/dst having different offset):
(1) 256 bytes
Test with the existing tools/testing/selftests/powerpc/stringloops/memcmp:
- without patch
29.773018302 seconds time elapsed ( +- 0.09% )
- with patch
16.485568173 seconds time elapsed ( +- 0.02% )
-> There is ~+80% percent improvement
(2) 32 bytes
To observe performance impact on < 32 bytes, modify
tools/testing/selftests/powerpc/stringloops/memcmp.c with following:
-------
#include <string.h>
#include "utils.h"
-#define SIZE 256
+#define SIZE 32
#define ITERATIONS 10000
int test_memcmp(const void *s1, const void *s2, size_t n);
--------
- Without patch
0.244746482 seconds time elapsed ( +- 0.36%)
- with patch
0.215069477 seconds time elapsed ( +- 0.51%)
-> There is ～+13% improvement
(3) 0~8 bytes
To observe <8 bytes performance impact, modify
tools/testing/selftests/powerpc/stringloops/memcmp.c with following:
-------
#include <string.h>
#include "utils.h"
-#define SIZE 256
-#define ITERATIONS 10000
+#define SIZE 8
+#define ITERATIONS 1000000
int test_memcmp(const void *s1, const void *s2, size_t n);
-------
- Without patch
1.845642503 seconds time elapsed ( +- 0.12% )
- With patch
1.849767135 seconds time elapsed ( +- 0.26% )
-> They are nearly the same. (-0.2%)
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch adds error reporting to H_ENTER and H_READ hcalls. A
failure for both these hcalls are mostly fatal and it would be good to
log the failure reason.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
