summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-30netfilter: conntrack: sanitize table size default settingsFlorian Westphal
conntrack has two distinct table size settings: nf_conntrack_max and nf_conntrack_buckets. The former limits how many conntrack objects are allowed to exist in each namespace. The second sets the size of the hashtable. As all entries are inserted twice (once for original direction, once for reply), there should be at least twice as many buckets in the table than the maximum number of conntrack objects that can exist at the same time. Change the default multiplier to 1 and increase the chosen bucket sizes. This results in the same nf_conntrack_max settings as before but reduces the average bucket list length. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-30Merge branch 'IXP46x-PTP-Timer'David S. Miller
Linus Walleij says: ==================== IXP46x PTP Timer clean-up and DT ChangeLog v2->v3: - Dropped the patch enabling compile tests: we are still dependent on some machine-specific headers. The plan is to get rid of this after device tree conversion. We include one of the compile testing fixes anyway, because it is nice to have fixed. - Rebased on the latest net-next ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30ixp4xx_eth: Probe the PTP module from the device treeLinus Walleij
This adds device tree probing support for the PTP module adjacent to the ethernet module. It is pretty straight forward, all resources are in the device tree as they come to the platform device. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30ixp4xx_eth: Add devicetree bindingsLinus Walleij
This adds device tree bindings for the IXP46x PTP Timer, a companion to the IXP4xx ethernet in newer platforms. Cc: devicetree@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30ixp4xx_eth: Stop referring to GPIOsLinus Walleij
The driver is being passed interrupts, then looking up the same interrupts as GPIOs a second time to convert them into interrupts and set properties on them. This is pointless: the GPIO and irqchip APIs of a GPIO chip are orthogonal. Just request the interrupts and be done with it, drop reliance on any GPIO functions or definitions. Use devres-managed functions and add a small devress quirk to unregister the clock as well and we can rely on devres to handle all the resources and cut down a bunch of boilerplate in the process. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30ixp4xx_eth: fix compile-testingArnd Bergmann
Change the driver to use portable integer types to avoid warnings during compile testing, including: drivers/net/ethernet/xscale/ixp4xx_eth.c:721:21: error: cast to 'u32 *' (aka 'unsigned int *') from smaller integer type 'int' [-Werror,-Wint-to-pointer-cast] memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4); ^ drivers/net/ethernet/xscale/ixp4xx_eth.c:963:12: error: incompatible pointer types passing 'u32 *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types] &port->desc_tab_phys))) ^~~~~~~~~~~~~~~~~~~~ include/linux/dmapool.h:27:20: note: passing argument to parameter 'handle' here dma_addr_t *handle); ^ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30ixp4xx_eth: make ptp support a platform driverArnd Bergmann
After the recent ixp4xx cleanups, the ptp driver has gained a build failure in some configurations: drivers/net/ethernet/xscale/ptp_ixp46x.c: In function 'ptp_ixp_init': drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: error: 'IXP4XX_TIMESYNC_BASE_VIRT' undeclared (first use in this function) Avoid the last bit of hardcoded constants from platform headers by turning the ptp driver bit into a platform driver and passing the IRQ and MMIO address as resources. This is a bit tricky: - The interface between the two drivers is now the new ixp46x_ptp_find() function, replacing the global ixp46x_phc_index variable. The call is done as late as possible, in hwtstamp_set(), to ensure that the ptp device is fully probed. - As the ptp driver is now called by the network driver, the link dependency is reversed, which in turn requires a small Makefile hack - The GPIO number is still left hardcoded. This is clearly not great, but it can be addressed later. Note that commit 98ac0cc270b7 ("ARM: ixp4xx: Convert to MULTI_IRQ_HANDLER") changed the IRQ number to something meaningless. Passing the correct IRQ in a resource fixes this. - When the PTP driver is disabled, ethtool .get_ts_info() now correctly lists only software timestamping regardless of the hardware. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [Fix a missing include] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30Merge branch 'hns3-cleanups'David S. Miller
Guangbin Huang says: ==================== net: hns3: add some cleanups This series includes some cleanups for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: uniform parameter name of hclge_ptp_clean_tx_hwts()Hao Chen
The parameter name of hclge_ptp_clean_tx_hwts() in declaration is "dev", but the definition of this function is used the common name "hdev" as other functions, so modify it. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hnss3: use max() to simplify codeHao Chen
Replace the "? :" statement wich max() to simplify code. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: modify a print format of hns3_dbg_queue_map()Hao Chen
The type of tqp_vector->vector_irq is int, so modify its print format to "%d". Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: refine function hclge_dbg_dump_tm_pri()Guangbin Huang
To improve flexibility, simplicity and maintainability to dump info of every element of tm priority, add a struct hclge_dbg_item array of tm priority and fill string of every data according to this array. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: reconstruct function hclge_ets_validate()Guangbin Huang
This patch reconstructs function hclge_ets_validate() to reduce the code cycle complexity and make code more concise. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: reconstruct function hns3_self_testPeng Li
This patch reconstructs function hns3_self_test to reduce the code cycle complexity and make code more concise. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: initialize each member of structure array on a separate lineJiaran Zhang
To make the format of each member initialization of structure array clearer, initialize each member on a separate line. Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30Merge branch 'bnxt_en-fw-messages'David S. Miller
Michael Chan says: ==================== bnxt_en: Implement new driver APIs to send FW messages The current driver APIs to send messages to the firmware allow only one outstanding message in flight. There is only one buffer for the firmware response for each firmware channel. To send a firmware message, all callers must take a mutex and it is released after the firmware response has been read. This scheme does not allow multiple firmware messages in flight. Firmware may take a long time to respond to some messages (e.g. NVRAM related ones) and this causes the mutex to be held for a long time, blocking other callers. This patchset intoduces the new driver APIs to address the above shortcomings. The new APIs are compatible with new and old firmware. But the new deferred firmware response mechanism will require newer firmware in order to allow multiple outstanding firmware commands. All callers are updated to use the new APIs. v2: Patch 4 and patch 9 updated to fix issues reported by test robot ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: support multiple HWRM commands in flightEdwin Peer
Add infrastructure to maintain a pending list of HWRM commands awaiting completion and reduce the scope of the hwrm_cmd_lock mutex so that it protects only the request mailbox. The mailbox is free to use for one or more concurrent commands after receiving deferred response events. For uniformity and completeness, use the same pending list for collecting completions for commands that respond via a completion ring. These commands are only used for freeing rings and for IRQ test and we only support one such command in flight. Note deferred responses are also only supported on the main channel. The secondary channel (KONG) does not support deferred responses. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: remove legacy HWRM interfaceEdwin Peer
There are no longer any callers relying on the old API. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: update all firmware calls to use the new APIsEdwin Peer
The conversion follows this general pattern for most of the calls: 1. The input message is changed from a stack variable initialized using bnxt_hwrm_cmd_hdr_init() to a pointer allocated and intialized using hwrm_req_init(). 2. If we don't need to read the firmware response, the hwrm_send_message() call is replaced with hwrm_req_send(). 3. If we need to read the firmware response, the mutex lock is replaced by hwrm_req_hold() to hold the response. When the response is read, the mutex unlock is replaced by hwrm_req_drop(). If additional DMA buffers are needed for firmware response data, the hwrm_req_dma_slice() is used instead of calling dma_alloc_coherent(). Some minor refactoring is also done while doing these conversions. v2: Fix unintialized variable warnings in __bnxt_hwrm_get_tx_rings() and bnxt_approve_mac() Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: use link_lock instead of hwrm_cmd_lock to protect link_infoEdwin Peer
We currently use the hwrm_cmd_lock to serialize the update of the firmware's link status response data and the copying of link status data to the VF. This won't work when we update the firmware message APIs, so we use the link_lock mutex instead. All link_info data should be updated under the link_lock mutex. Also add link_lock to functions that touch link_info in __bnxt_open_nic() and bnxt_probe_phy(). The locking is probably not strictly necessary during probe, but it's more consistent. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: add support for HWRM request slicesEdwin Peer
Slices are a mechanism for suballocating DMA mapped regions from the request buffer. Such regions can be used for indirect command data instead of creating new mappings with dma_alloc_coherent(). The advantage of using a slice is that the lifetime of the slice is bound to the request and will be automatically unmapped when the request is consumed. A single external region is also supported. This allows for regions that will not fit inside the spare request buffer space such that the same API can be used consistently even for larger mappings. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: add HWRM request assignment APIEdwin Peer
hwrm_req_replace() provides an assignment like operation to replace a managed HWRM request object with data from a pre-built source. This is useful for handling request data provided by higher layer HWRM clients. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: discard out of sequence HWRM responsesEdwin Peer
During firmware crash recovery, it is possible for firmware to respond to stale HWRM commands that have already timed out. Because response buffers may be reused, any out of sequence responses need to be ignored and only the matching seq_id should be accepted. Also, READ_ONCE should be used for the reads from the DMA buffer to ensure that the necessary loads are scheduled. Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: introduce new firmware message API based on DMA poolsEdwin Peer
This change constitutes a major step towards supporting multiple firmware commands in flight by maintaining a separate response buffer for the duration of each request. These firmware commands are also known as Hardware Resource Manager (HWRM) commands. Using separate response buffers requires an API change in order for callers to be able to free the buffer when done. It is impossible to keep the existing APIs unchanged. The existing usage for a simple HWRM message request such as the following: struct input req = {0}; bnxt_hwrm_cmd_hdr_init(bp, &req, REQ_TYPE, -1, -1); rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT); if (rc) /* error */ changes to: struct input *req; rc = hwrm_req_init(bp, req, REQ_TYPE); if (rc) /* error */ rc = hwrm_req_send(bp, req); /* consumes req */ if (rc) /* error */ The key changes are: 1. The req is no longer allocated on the stack. 2. The caller must call hwrm_req_init() to allocate a req buffer and check for a valid buffer. 3. The req buffer is automatically released when hwrm_req_send() returns. 4. If the caller wants to check the firmware response, the caller must call hwrm_req_hold() to take ownership of the response buffer and release it afterwards using hwrm_req_drop(). The caller is no longer required to explicitly hold the hwrm_cmd_lock mutex to read the response. 5. Because the firmware commands and responses all have different sizes, some safeguards are added to the code. This patch maintains legacy API compatibiltiy, implementing the old API in terms of the new. The follow-on patches will convert all callers to use the new APIs. v2: Fix redefined writeq with parisc .config Fix "cast from pointer to integer of different size" warning in hwrm_calc_sentinel() Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: move HWRM API implementation into separate fileEdwin Peer
Move all firmware messaging functions and definitions to new bnxt_hwrm.[ch]. The follow-on patches will make major modifications to these APIs. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: Refactor the HWRM_VER_GET firmware callsEdwin Peer
Refactor the code so that __bnxt_hwrm_ver_get() does not call bnxt_hwrm_do_send_msg() directly. The new APIs will not expose this internal call. Add a new bnxt_hwrm_poll() to poll the HWRM_VER_GET firmware call silently. The other bnxt_hwrm_ver_get() function will send the HWRM_VER_GET message directly with error logs enabled. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: remove DMA mapping for KONG responseEdwin Peer
The additional response buffer serves no useful purpose. There can be only one firmware command in flight due to the hwrm_cmd_lock mutex, which is taken for the entire duration of any command completion, KONG or otherwise. It is thus safe to share a single DMA buffer. Removing the code associated with the additional mapping will simplify matters in the next patch, which allocates response buffers from DMA pools on a per request basis. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30netfilter: add netfilter hooks to SRv6 data planeRyoga Saito
This patch introduces netfilter hooks for solving the problem that conntrack couldn't record both inner flows and outer flows. This patch also introduces a new sysctl toggle for enabling lightweight tunnel netfilter hooks. Signed-off-by: Ryoga Saito <contact@proelbtn.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-29io_uring: allow updating linked timeoutsPavel Begunkov
We allow updating normal timeouts, add support for adjusting timings of linked timeouts as well. Reported-by: Victor Stewart <v@nametag.social> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-29io_uring: keep ltimeouts in a listPavel Begunkov
A preparation patch. Keep all queued linked timeout in a list, so they may be found and updated. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-29Linux 5.14v5.14Linus Torvalds
2021-08-29Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One hotfix for a NULL pointer deref in the Renesas usb clk driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: renesas: rcar-usb2-clock-sel: Fix kernel NULL pointer dereference
2021-08-29Merge tag 'irqchip-5.15' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - API updates: - Treewide conversion to generic_handle_domain_irq() for anything that looks like a chained interrupt controller - Update the irqdomain documentation - Use of bitmap_zalloc() throughout the tree - New functionalities: - Support for GICv3 EPPI partitions - Fixes: - Qualcomm PDC hierarchy fixes - Yet another priority decoding fix for the GICv3 pseudo-NMIs - Fix the apple-aic driver irq_eoi() callback to always unmask the interrupt - Properly handle edge interrupts on loongson-pch-pic - Let the mtk-sysirq driver advertise IRQCHIP_SKIP_SET_WAKE Link: https://lore.kernel.org/r/20210828121013.2647964-1-maz@kernel.org
2021-08-29Merge tag 'sched_urgent_for_v5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Have get_push_task() check whether current has migration disabled and thus avoid useless invocations of the migration thread - Rework initialization flow so that all rq->core's are initialized, even of CPUs which have not been onlined yet, so that iterating over them all works as expected * tag 'sched_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix get_push_task() vs migrate_disable() sched: Fix Core-wide rq->lock for uninitialized CPUs
2021-08-29Merge tag 'irq_urgent_for_v5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Borislav Petkov: - Have msix_mask_all() check a global control which says whether MSI-X masking should be done and thus make it usable on Xen-PV too * tag 'irq_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Skip masking MSI-X on Xen PV
2021-08-29Merge tag 'perf_urgent_for_v5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Prevent the amd/power module from being removed while in use - Mark AMD IBS as not supporting content exclusion - Add a workaround for AMD erratum #1197 where IBS registers might not be restored properly after exiting CC6 state - Fix a potential truncation of a 32-bit variable due to shifting - Read the correct bits describing the number of configurable address ranges on Intel PT * tag 'perf_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/power: Assign pmu.module perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op perf/x86/amd/ibs: Work around erratum #1197 perf/x86/intel/uncore: Fix integer overflow on 23 bit left shift of a u32 perf/x86/intel/pt: Fix mask of num_address_ranges
2021-08-29Merge tag 'x86_urgent_for_v5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix build error on RHEL where -Werror=maybe-uninitialized is set. - Restore the firmware's IDT when calling EFI boot services and before ExitBootServices() has been called. This fixes a boot failure on what appears to be a tablet with 32-bit UEFI running a 64-bit kernel. * tag 'x86_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Fix a maybe-uninitialized build warning treated as error x86/efi: Restore Firmware IDT before calling ExitBootServices()
2021-08-29Revert "parisc: Add assembly implementations for memset, strlen, strcpy, ↵Helge Deller
strncpy and strcat" This reverts commit 83af58f8068ea3f7b3c537c37a30887bfa585069. It turns out that at least the assembly implementation for strncpy() was buggy. Revert the whole commit and return back to the default coding. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.4+ Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-29Merge tag 'wireless-drivers-next-2021-08-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== pull-request: wireless-drivers-next-2021-08-29 here's a pull request to net-next tree, more info below. Please let me know if there are any problems. wireless-drivers-next patches for v5.15 Second, and most likely last, set of patches for v5.15. Lots of iwlwifi patches this time, but smaller changes to other drivers as well. Nothing special standing out. Major changes: rtw88 * add quirk to disable pci caps on HP Pavilion 14-ce0xxx brcmfmac * Add WPA3 Personal with FT to supported cipher suites wcn36xx * allow firmware name to be overridden by DT iwlwifi * support scanning hidden 6GHz networks * support for a new hardware family (Bz) * support for new firmware API versions mwifiex * add reset_d3cold quirk for Surface gen4+ devices ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-29io_uring: support CLOCK_BOOTTIME/REALTIME for timeoutsJens Axboe
Certain use cases want to use CLOCK_BOOTTIME or CLOCK_REALTIME rather than CLOCK_MONOTONIC, instead of the default CLOCK_MONOTONIC. Add an IORING_TIMEOUT_BOOTTIME and IORING_TIMEOUT_REALTIME flag that allows timeouts and linked timeouts to use the selected clock source. Only one clock source may be selected, and we -EINVAL the request if more than one is given. If neither BOOTIME nor REALTIME are selected, the previous default of MONOTONIC is used. Link: https://github.com/axboe/liburing/issues/369 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-29io-wq: provide a way to limit max number of workersJens Axboe
io-wq divides work into two categories: 1) Work that completes in a bounded time, like reading from a regular file or a block device. This type of work is limited based on the size of the SQ ring. 2) Work that may never complete, we call this unbounded work. The amount of workers here is just limited by RLIMIT_NPROC. For various uses cases, it's handy to have the kernel limit the maximum amount of pending workers for both categories. Provide a way to do with with a new IORING_REGISTER_IOWQ_MAX_WORKERS operation. IORING_REGISTER_IOWQ_MAX_WORKERS takes an array of two integers and sets the max worker count to what is being passed in for each category. The old values are returned into that same array. If 0 is being passed in for either category, it simply returns the current value. The value is capped at RLIMIT_NPROC. This actually isn't that important as it's more of a hint, if we're exceeding the value then our attempt to fork a new worker will fail. This happens naturally already if more than one node is in the system, as these values are per-node internally for io-wq. Reported-by: Johannes Lundberg <johalun0@gmail.com> Link: https://github.com/axboe/liburing/issues/420 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-29Merge tag 'floppy-for-5.15' of https://github.com/evdenis/linux-floppy into ↵Jens Axboe
for-5.15/drivers Pull floppy fix from Denis: "Bring back O_NDELAY for floppy Only one commit this time with revert of O_NDELAY removal for the floppy. Users reported that the commit breaks userspace utils and known floppy workflow patterns. We already reverted the same commit back in 2016 presumably for the same reason. Completely drop O_NDELAY for floppy seems excessive to solve problems it introduces. I started to write basic selftests for the floppy to prevent this kind of userspace breaks in the future. Signed-off-by: Denis Efremov <efremov@linux.com>" * tag 'floppy-for-5.15' of https://github.com/evdenis/linux-floppy: Revert "floppy: reintroduce O_NDELAY fix"
2021-08-29ssb: fix boolreturn.cocci warningJing Yangyang
./include/linux/ssb/ssb_driver_extif.h:200:8-9:WARNING: return of 0/1 in function 'ssb_extif_available' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210824061341.59255-1-deng.changcheng@zte.com.cn
2021-08-29intel: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/f55043d0c847bfae60087707778563cf732a7bf9.1629619229.git.christophe.jaillet@wanadoo.fr
2021-08-29mwifiex: pcie: add reset_d3cold quirk for Surface gen4+ devicesTsuchiya Yuto
To reset mwifiex on Surface gen4+ (Pro 4 or later gen) devices, it seems that putting the wifi device into D3cold is required according to errata.inf file on Windows installation (Windows/INF/errata.inf). This patch adds a function that performs power-cycle (put into D3cold then D0) and call the function at the end of reset_prepare(). Note: Need to also reset the parent device (bridge) of wifi on SB1; it might be because the bridge of wifi always reports it's in D3hot. When I tried to reset only the wifi device (not touching parent), it gave the following error and the reset failed: acpi device:4b: Cannot transition to power state D0 for parent in D3hot mwifiex_pcie 0000:03:00.0: can't change power state from D3cold to D0 (config space inaccessible) Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210820142050.35741-3-verdre@v0yd.nl
2021-08-29mwifiex: pcie: add DMI-based quirk implementation for Surface devicesJonas Dreßler
This commit adds the ability to apply device-specific quirks to the mwifiex driver. It uses DMI matching similar to the quirks brcmfmac uses with dmi.c. We'll add identifiers to match various MS Surface devices, which this is primarily meant for, later. This commit is a slightly modified version of a previous patch sent in by Tsuchiya Yuto. Co-developed-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210820142050.35741-2-verdre@v0yd.nl
2021-08-29brcmfmac: pcie: fix oops on failure to resume and reprobeAhmad Fatoum
When resuming from suspend, brcmf_pcie_pm_leave_D3 will first attempt a hot resume and then fall back to removing the PCI device and then reprobing. If this probe fails, the kernel will oops, because brcmf_err, which is called to report the failure will dereference the stale bus pointer. Open code and use the default bus-less brcmf_err to avoid this. Fixes: 8602e62441ab ("brcmfmac: pass bus to the __brcmf_err() in pcie.c") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210817063521.22450-1-a.fatoum@pengutronix.de
2021-08-29bcma: Drop the unused parameter of bcma_scan_read32()Zenghui Yu
As it had never been used since the initial commit 8369ae33b705 ("bcma: add Broadcom specific AMBA bus driver"). Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210727025232.663-3-yuzenghui@huawei.com
2021-08-29bcma: Fix memory leak for internally-handled coresZenghui Yu
kmemleak reported that dev_name() of internally-handled cores were leaked on driver unbinding. Let's use device_initialize() to take refcounts for them and put_device() to properly free the related stuff. While looking at it, there's another potential issue for those which should be *registered* into driver core. If device_register() failed, we put device once and freed bcma_device structures. In bcma_unregister_cores(), they're treated as unregistered and we hit both UAF and double-free. That smells not good and has also been fixed now. Fixes: ab54bc8460b5 ("bcma: fill core details for every device") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210727025232.663-2-yuzenghui@huawei.com
2021-08-29Merge commit 'e257d969f36503b8eb1240f32653a1afb3109f86' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next I think last commits in tag iwlwifi-next-for-kalle-2021-08-26 are not ready yet so I'm skipping those and pulling an earlier commit. I modified Luca's description below to not include the skipped commits. iwlwifi patches for v5.15 * Support scanning hidden 6GHz networks; * Some improvements in the FW error dumps; * Add some HE capability flags * A bunch of janitorial clean-ups; * Clean-ups in the TX code; * Small fix for SMPS; * Support for a new hardware family (Bz); * Small fix in the scan code; * A bunch of changes in the D3 code, including new FW API; * Finalize the refactoring of 6GHz scan; * Initial changes in the SAR profile code; * Fix reading one of our ACPI tables (WTAS); * Support some new ACPI table revisions; * Support new API of the WoWlan status FW notification; * Fixes in SAR ACPI tables handling; * Some debugging improvements; * Fix in ROC; * Support for new FW API versions; * Support new FW command versions; * Some other small fixes, clean-ups and improvements.
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 15:31:33 +0000