summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-05serial: pic32: restore disabled irqs in pic32_uart_startup()Jiri Slaby
pic32_uart_startup() disables interrupts by local_irq_save(). But the function never enables them. The serial core only holds a mutex, so irqs are not restored. So how could this driver work? This irq handling was already present in the driver's initial commit 157b9394709ed (serial: pic32_uart: Add PIC32 UART driver). So is it a candidate for removal? Anyone has a contact to the author: Andrei Pistirica (I believe the one below -- @microchip.com -- will bounce)? Or to someone else @microchip.com? Cc: Andrei Pistirica <andrei.pistirica@microchip.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220503063122.20957-12-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: pic32: free up irq names correctlyJiri Slaby
struct pic32_sport contains built-up names for irqs. These are freed only in error path of pic32_uart_startup(). And even there, the freeing happens before free_irq(). So fix this by: * moving frees after free_irq(), and * add frees to pic32_uart_shutdown() -- the opposite of pic32_uart_startup(). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220503063122.20957-11-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: pic32: don't zero members of kzalloc-ated structureJiri Slaby
struct pic32_sport (sport) has just been kzallocated. So there is no need to zero its member (sport->port) now. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220503063122.20957-10-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: pic32: don't assign pic32_sport::cts_gpio twiceJiri Slaby
sport->cts_gpio is first assigned -EINVAL and few lines below using of_get_named_gpio(). Remove the first (useless) assignment. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220503063122.20957-9-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: pic32: convert to_pic32_sport() to an inlineJiri Slaby
'c' is not in wrapped in parentheses in the to_pic32_sport() macro, so it might be problematic wrt macro expansion. Using an inline is always safer in these cases. Both type-wise and macro-expansion-wise. So switch the macro to an inline. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220503063122.20957-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: pic32: remove pic32_get_port() macroJiri Slaby
It's just &sport->port. First, sport was not in parenthesis, so macro expansion could be an issue. Second, it's so simple, that we can expand the macro and make the code really straightforward. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220503063122.20957-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: pic32: simplify pic32_sport::enable_tx_irq handlingJiri Slaby
Make it a bool, so use true+false. And remove the wrap-around macro -- i.e. access the member directly. It makes the code more obvious. BTW the macro did not have 'sport' in parentheses, so it was potentially problematic wrt expansion. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220503063122.20957-6-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: pic32: simplify clk handlingJiri Slaby
struct pic32_sport::ref_clk is only set, but not read. That means we can remove it. And when we do so, pic32_enable_clock() and pic32_disable_clock() are simple wrappers around clk_prepare_enable() and clk_disable_unprepare() respectively. So we can remove the former two from the code and replace it by the latter two. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220503063122.20957-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: pic32: remove constants from struct pic32_sportJiri Slaby
All the irqflags_* in struct pic32_sport are set to IRQF_NO_THREAD and never updated. So remove pic32_sport::irqflags_* and use the flag directly. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220503063122.20957-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: pic32: move header content to .cJiri Slaby
There is no point keeping the header content separated. So move the content to the appropriate source file. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220503063122.20957-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: pic32: remove unused items from the headerJiri Slaby
struct pic32_console_opt and its support are unused in pic32. So remove all that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220503063122.20957-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 modeMarek Vasut
In case the RS485 mode is emulated using GPIO RTS, use the TC interrupt to deassert the GPIO RTS, otherwise the GPIO RTS stays asserted after a transmission ended and the RS485 cannot work. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Erwan Le Ray <erwan.leray@foss.st.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jean Philippe Romain <jean-philippe.romain@foss.st.com> Cc: Valentin Caron <valentin.caron@foss.st.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/20220430162845.244655-2-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: stm32: Factor out GPIO RTS toggling into separate functionMarek Vasut
Pull out the GPIO RTS enable and disable handling into separate function. Limit the scope of GPIO RTS toggling only to GPIO emulated RS485 too. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Erwan Le Ray <erwan.leray@foss.st.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jean Philippe Romain <jean-philippe.romain@foss.st.com> Cc: Valentin Caron <valentin.caron@foss.st.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/20220430162845.244655-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: sifive: Remove duplicate `clkin_rate' settingMaciej W. Rozycki
The `clkin_rate' member of `struct sifive_serial_port' now duplicates `uartclk' from nested `struct uart_port', so use `uartclk' throughout and remove `clkin_rate'. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204291656150.9383@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: sifive: Report actual baud base rather than fixed 115200Maciej W. Rozycki
The base baud value reported is supposed to be the highest baud rate that can be set for a serial port. The SiFive FU740-C000 SOC's on-chip UART supports baud rates of up to 1/16 of the input clock rate, which is the bus clock `tlclk'[1], often at 130MHz in the case of the HiFive Unmatched board. However the sifive UART driver reports a fixed value of 115200 instead: 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 1, base_baud = 115200) is a SiFive UART v0 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 2, base_baud = 115200) is a SiFive UART v0 even though we already support setting higher baud rates, e.g.: $ tty /dev/ttySIF1 $ stty speed 230400 The baud base value is computed by the serial core by dividing the UART clock recorded in `struct uart_port' by 16, which is also the minimum value of the clock divider supported, so correct the baud base value reported by setting the UART clock recorded to the input clock rate rather than 115200: 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 1, base_baud = 8125000) is a SiFive UART v0 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 2, base_baud = 8125000) is a SiFive UART v0 References: [1] "SiFive FU740-C000 Manual", v1p3, SiFive, Inc., August 13, 2021, Section 16.9 "Baud Rate Divisor Register (div)", pp.143-144 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1f1496a923b6 ("riscv: Fix sifive serial driver") Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204291656280.9383@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250: Add proper clock handling for OxSemi PCIe devicesMaciej W. Rozycki
Oxford Semiconductor PCIe (Tornado) 950 serial port devices are driven by a fixed 62.5MHz clock input derived from the 100MHz PCI Express clock. We currently drive the device using its default oversampling rate of 16 and the clock prescaler disabled, consequently yielding the baud base of 3906250. This base is inadequate for some of the high-speed baud rates such as 460800bps, for which the closest rate possible can be obtained by dividing the baud base by 8, yielding the baud rate of 488281.25bps, which is off by 5.9638%. This is enough for data communication to break with the remote end talking actual 460800bps, where missed stop bits have been observed. We can do better however, by taking advantage of a reduced oversampling rate, which can be set to any integer value from 4 to 16 inclusive by programming the TCR register, and by using the clock prescaler, which can be set to any value from 1 to 63.875 in increments of 0.125 in the CPR/CPR2 register pair. The prescaler has to be explicitly enabled though by setting bit 7 in the MCR or otherwise it is bypassed (in the enhanced mode that we enable) as if the value of 1 was used. Make use of these features then as follows: - Set the baud base to 15625000, reflecting the minimum oversampling rate of 4 with the clock prescaler and divisor both set to 1. - Override the `set_mctrl' and set the MCR shadow there so as to have MCR[7] always set and have the 8250 core propagate these settings. - Override the `get_divisor' handler and determine a good combination of parameters by using a lookup table with predetermined value pairs of the oversampling rate and the clock prescaler and finding a pair that divides the input clock such that the quotient, when rounded to the nearest integer, deviates the least from the exact result. Calculate the clock divisor accordingly. Scale the resulting oversampling rate (only by powers of two) if possible so as to maximise it, reducing the divisor accordingly, and avoid a divisor overflow for very low baud rates by scaling the oversampling rate and/or the prescaler even if that causes some accuracy loss. Also handle the historic spd_cust feature so as to allow one to set all the three parameters manually to arbitrary values, by keeping the low 16 bits for the divisor and then putting TCR in bits 19:16 and CPR/CPR2 in bits 28:20, sanitising the bit pattern supplied such as to clamp CPR/CPR2 values between 0.000 and 0.875 inclusive to 33.875. This preserves compatibility with any existing setups, that is where requesting a custom divisor that only has any bits set among the low 16 the oversampling rate of 16 and the clock prescaler of 33.875 will be used as with the original 8250. Finally abuse the `frac' argument to store the determined bit patterns for the TCR, CPR and CPR2 registers. - Override the `set_divisor' handler so as to set the TCR, CPR and CPR2 registers from the `frac' value supplied. Set the divisor as usual. With the baud base set to 15625000 and the unsigned 16-bit UART_DIV_MAX limitation imposed by `serial8250_get_baud_rate' standard baud rates below 300bps become unavailable in the regular way, e.g. the rate of 200bps requires the baud base to be divided by 78125 and that is beyond the unsigned 16-bit range. The historic spd_cust feature can still be used to obtain such rates if so required. See Documentation/tty/device_drivers/oxsemi-tornado.rst for more details. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181519450.9383@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250: Export ICR access helpers for internal useMaciej W. Rozycki
Make ICR access helpers available outside 8250_port.c, however retain them as ordinary static functions so as not to regress code generation. This is because `serial_icr_write' is currently automatically inlined by GCC, however `serial_icr_read' is not. Making them both static inline would grow code produced, e.g.: $ i386-linux-gnu-size --format=gnu 8250_port-{old,new}.o text data bss total filename 15065 3378 0 18443 8250_port-old.o 15289 3378 0 18667 8250_port-new.o and: $ riscv64-linux-gnu-size --format=gnu 8250_port-{old,new}.o text data bss total filename 16980 5306 0 22286 8250_port-old.o 17124 5306 0 22430 8250_port-new.o while making them external would needlessly add a new module interface and lose the benefit from `serial_icr_write' getting inlined outside 8250_port.o. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181517500.9383@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250: Fold EndRun device support into OxSemi Tornado codeMaciej W. Rozycki
The EndRun PTP/1588 dual serial port device is based on the Oxford Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set for EndRun Technologies and uses the same sequence to determine the number of ports available. Despite that we have duplicate code specific to the EndRun device. Remove redundant code then and factor out OxSemi Tornado device detection. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181516220.9383@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: men_z135_uart: Drop duplicated iotype assignmentIlpo Järvinen
The driver assigns same iotype twice. Drop one of them. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/14b71e1-2396-3d83-3a97-9582765d453@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250: pxa: Remove unneeded <linux/pm_runtime.h>Geert Uytterhoeven
The 8250 PXA driver never used Runtime PM, so there was never a need to include <linux/pm_runtime.h>. Fixes: ab28f51c77cd4618 ("serial: rewrite pxa2xx-uart to use 8250_core") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/9fd96fba9bbbbdeb16af0dc07ae9dee21c8e297c.1651494971.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250: core: Remove unneeded <linux/pm_runtime.h>Geert Uytterhoeven
The last calls into Runtime PM were moved to 8250_port.c a long time ago. Fixes: b6830f6df8914faa ("serial: 8250: Split base port operations from universal driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/2545eaa7fc552013a5d04c4df027255204e64834.1651494971.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250: dw: Fix NULL pointer dereferenceHeikki Krogerus
dw8250_platform_data is only used on DT platforms for now. Fixes: 4a218b277fdb ("serial: 8250: dw: Create a generic platform data structure") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220502115621.77985-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4Geert Uytterhoeven
Despite the name, R-Car V3U is the first member of the R-Car Gen4 family. Hence move its compatible value to the R-Car Gen4 section. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/c57ed00e85778380776330be6183c6861d843c22.1651497024.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4Geert Uytterhoeven
Despite the name, R-Car V3U is the first member of the R-Car Gen4 family. Hence move its compatible value to the R-Car Gen4 section. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/dd734aaa4e5e0b32864b038b79eafe72907fb99f.1651497024.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-02Merge 5.18-rc5 into tty-nextGreg Kroah-Hartman
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-01Linux 5.18-rc5v5.18-rc5Linus Torvalds
2022-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM: - Take care of faults occuring between the PARange and IPA range by injecting an exception - Fix S2 faults taken from a host EL0 in protected mode - Work around Oops caused by a PMU access from a 32bit guest when PMU has been created. This is a temporary bodge until we fix it for good. x86: - Fix potential races when walking host page table - Fix shadow page table leak when KVM runs nested - Work around bug in userspace when KVM synthesizes leaf 0x80000021 on older (pre-EPYC) or Intel processors Generic (but affects only RISC-V): - Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: work around QEMU issue with synthetic CPUID leaves Revert "x86/mm: Introduce lookup_address_in_mm()" KVM: x86/mmu: fix potential races when walking host page table KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR KVM: arm64: Inject exception on out-of-IPA-range translation fault KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set KVM: arm64: Handle host stage-2 faults from 32-bit EL0
2022-05-01Merge tag 'x86_urgent_for_v5.18_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is solely controlled by the hypervisor - A build fix to make the function prototype (__warn()) as visible as the definition itself - A bunch of objtool annotation fixes which have accumulated over time - An ORC unwinder fix to handle bad input gracefully - Well, we thought the microcode gets loaded in time in order to restore the microcode-emulated MSRs but we thought wrong. So there's a fix for that to have the ordering done properly - Add new Intel model numbers - A spelling fix * tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests bug: Have __warn() prototype defined unconditionally x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config objtool: Use offstr() to print address of missing ENDBR objtool: Print data address for "!ENDBR" data warnings x86/xen: Add ANNOTATE_NOENDBR to startup_xen() x86/uaccess: Add ENDBR to __put_user_nocheck*() x86/retpoline: Add ANNOTATE_NOENDBR for retpolines x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline objtool: Enable unreachable warnings for CLANG LTO x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE x86,objtool: Mark cpu_startup_entry() __noreturn x86,xen,objtool: Add UNWIND hint lib/strn*,objtool: Enforce user_access_begin() rules MAINTAINERS: Add x86 unwinding entry x86/unwind/orc: Recheck address range after stack info was updated x86/cpu: Load microcode during restore_processor_state() x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
2022-05-01Merge tag 'objtool_urgent_for_v5.18_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: "A bunch of objtool fixes to improve unwinding, sibling call detection, fallthrough detection and relocation handling of weak symbols when the toolchain strips section symbols" * tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix code relocs vs weak symbols objtool: Fix type of reloc::addend objtool: Fix function fallthrough detection for vmlinux objtool: Fix sibling call detection in alternatives objtool: Don't set 'jump_dest' for sibling calls x86/uaccess: Don't jump between functions
2022-05-01Merge tag 'irq_urgent_for_v5.18_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Borislav Petkov: - Fix locking when accessing device MSI descriptors * tag 'irq_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bus: fsl-mc-msi: Fix MSI descriptor mutex lock for msi_first_desc()
2022-04-30Merge tag 'driver-core-5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core and kernfs fixes for some reported problems. They include: - kernfs regression that is causing oopses in 5.17 and newer releases - topology sysfs fixes for a few small reported problems. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: fix NULL dereferencing in kernfs_remove topology: Fix up build warning in topology_is_visible() arch_topology: Do not set llc_sibling if llc_id is invalid topology: make core_mask include at least cluster_siblings topology/sysfs: Hide PPIN on systems that do not support it.
2022-04-30Merge tag 'char-misc-5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a small number of char/misc/other driver fixes for 5.18-rc5 Nothing major in here, this is mostly IIO driver fixes along with some other small things: - at25 driver fix for systems without a dma-able stack - phy driver fixes for reported issues - binder driver fixes for reported issues All of these have been in linux-next without any reported problems" * tag 'char-misc-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (31 commits) eeprom: at25: Use DMA safe buffers binder: Gracefully handle BINDER_TYPE_FDA objects with num_fds=0 binder: Address corner cases in deferred copy and fixup phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe() iio: imu: inv_icm42600: Fix I2C init possible nack iio: dac: ltc2688: fix voltage scale read interconnect: qcom: sdx55: Drop IP0 interconnects interconnect: qcom: sc7180: Drop IP0 interconnects phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks bus: mhi: host: pci_generic: Flush recovery worker during freeze bus: mhi: host: pci_generic: Add missing poweroff() PM callback phy: ti: tusb1210: Fix an error handling path in tusb1210_probe() phy: samsung: exynos5250-sata: fix missing device put in probe error paths phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe phy: ti: Fix missing of_node_put in ti_pipe3_get_sysctrl() phy: ti: tusb1210: Make tusb1210_chg_det_states static iio:dac:ad3552r: Fix an IS_ERR() vs NULL check iio: sx9324: Fix default precharge internal resistance register ...
2022-04-30Merge tag 'tty-5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small serial driver fixes, and a larger number of GSM line discipline fixes for 5.18-rc5. These include: - lots of tiny n_gsm fixes for issues to resolve a number of reported problems. Seems that people are starting to actually use this code again. - 8250 driver fixes for some devices - imx serial driver fix - amba-pl011 driver fix All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (27 commits) tty: n_gsm: fix sometimes uninitialized warning in gsm_dlci_modem_output() serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device serial: 8250: Also set sticky MCR bits in console restoration tty: n_gsm: fix software flow control handling tty: n_gsm: fix invalid use of MSC in advanced option tty: n_gsm: fix broken virtual tty handling Revert "serial: sc16is7xx: Clear RS485 bits in the shutdown" tty: n_gsm: fix missing update of modem controls after DLCI open serial: 8250: Fix runtime PM for start_tx() for empty buffer serial: imx: fix overrun interrupts in DMA mode serial: amba-pl011: do not time out prematurely when draining tx fifo tty: n_gsm: fix incorrect UA handling tty: n_gsm: fix reset fifo race condition tty: n_gsm: fix missing tty wakeup in convergence layer type 2 tty: n_gsm: fix wrong signal octets encoding in MSC tty: n_gsm: fix wrong command frame length field encoding tty: n_gsm: fix wrong command retry handling tty: n_gsm: fix missing explicit ldisc flush tty: n_gsm: fix wrong DLCI release order tty: n_gsm: fix insufficient txframe size ...
2022-04-30Merge tag 'usb-5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 5.18-rc5 for some reported issues and new quirks. They include: - dwc3 driver fixes - xhci driver fixes - typec driver fixes - new usb-serial driver ids - added new USB devices to existing quirk tables - other tiny fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits) usb: phy: generic: Get the vbus supply usb: dwc3: gadget: Return proper request status usb: dwc3: pci: add support for the Intel Meteor Lake-P usb: dwc3: core: Only handle soft-reset in DCTL usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind() usb: misc: eud: Fix an error handling path in eud_probe() usb: core: Don't hold the device lock while sleeping in do_proc_control() usb: dwc3: Try usb-role-switch first in dwc3_drd_init usb: dwc3: core: Fix tx/rx threshold settings usb: mtu3: fix USB 3.0 dual-role-switch from device to host xhci: Enable runtime PM on second Alderlake controller usb: dwc3: fix backwards compat with rockchip devices dt-bindings: usb: samsung,exynos-usb2: add missing required reg usb: misc: fix improper handling of refcount in uss720_probe() USB: Fix ehci infinite suspend-resume loop issue in zhaoxin usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constant usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLY usb: typec: ucsi: Fix role swapping usb: typec: ucsi: Fix reuse of completion structure usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions ...
2022-04-30Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One fix for an endless error loop with the target driver affecting tapes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: pscsi: Set SCF_TREAT_READ_AS_NORMAL flag only if there is valid data
2022-04-29Merge tag 'soc-fixes-5.18-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: - A fix for a regression caused by the previous set of bugfixes changing tegra and at91 pinctrl properties. More work is needed to figure out what this should actually be, but a revert makes it work for the moment. - Defconfig regression fixes for tegra after renamed symbols - Build-time warning and static checker fixes for imx, op-tee, sunxi, meson, at91, and omap - More at91 DT fixes for audio, regulator and spi nodes - A regression fix for Renesas Hyperflash memory probe - A stability fix for amlogic boards, modifying the allowed cpufreq states - Multiple fixes for system suspend on omap2+ - DT fixes for various i.MX bugs - A probe error fix for imx6ull-colibri MMC - A MAINTAINERS file entry for samsung bug reports * tag 'soc-fixes-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) Revert "arm: dts: at91: Fix boolean properties with values" bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create() Revert "arm64: dts: tegra: Fix boolean properties with values" arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock ARM: dts: imx6ull-colibri: fix vqmmc regulator MAINTAINERS: add Bug entry for Samsung and memory controller drivers memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35 ARM: dts: am3517-evm: Fix misc pinmuxing ARM: dts: am33xx-l4: Add missing touchscreen clock properties ARM: dts: Fix mmc order for omap3-gta04 ARM: dts: at91: fix pinctrl phandles ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name ARM: dts: at91: Describe regulators on at91sam9g20ek ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek ARM: dts: at91: Fix boolean properties with values ARM: dts: at91: use generic node name for dataflash ARM: dts: at91: align SPI NOR node name with dtschema ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines ...
2022-04-29Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A semi-large pile of clk driver fixes this time around. Nothing is touching the core so these fixes are fairly well contained to specific devices that use these clk drivers. - Some Allwinner SoC fixes to gracefully handle errors and mark an RTC clk as critical so that the RTC keeps ticking. - Fix AXI bus clks and RTC clk design for Microchip PolarFire SoC driver introduced this cycle. This has some devicetree bits acked by riscv maintainers. We're fixing it now so that the prior bindings aren't released in a major kernel version. - Remove a reset on Microchip PolarFire SoCs that broke when enabling CONFIG_PM. - Set a min/max for the Qualcomm graphics clk. This got broken by the clk rate range patches introduced this cycle" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource() clk: sunxi-ng: sun6i-rtc: Mark rtc-32k as critical riscv: dts: microchip: reparent mpfs clocks clk: microchip: mpfs: add RTCREF clock control clk: microchip: mpfs: re-parent the configurable clocks dt-bindings: rtc: add refclk to mpfs-rtc dt-bindings: clk: mpfs: add defines for two new clocks dt-bindings: clk: mpfs document msspll dri registers riscv: dts: microchip: fix usage of fic clocks on mpfs clk: microchip: mpfs: mark CLK_ATHENA as critical clk: microchip: mpfs: fix parents for FIC clocks clk: qcom: clk-rcg2: fix gfx3d frequency calculation clk: microchip: mpfs: don't reset disabled peripherals clk: sunxi-ng: fix not NULL terminated coccicheck error
2022-04-29Merge tag 'block-5.18-2022-04-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Revert of a patch that caused timestamp issues (Tejun) - iocost warning fix (Tejun) - bfq warning fix (Jan) * tag 'block-5.18-2022-04-29' of git://git.kernel.dk/linux-block: bfq: Fix warning in bfqq_request_over_limit() Revert "block: inherit request start time from bio for BLK_CGROUP" iocost: don't reset the inuse weight of under-weighted debtors
2022-04-29Merge tag 'io_uring-5.18-2022-04-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Pretty boring: - three patches just adding reserved field checks (me, Eugene) - Fixing a potential regression with IOPOLL caused by a block change (Joseph)" Boring is good. * tag 'io_uring-5.18-2022-04-29' of git://git.kernel.dk/linux-block: io_uring: check that data field is 0 in ringfd unregister io_uring: fix uninitialized field in rw io_kiocb io_uring: check reserved fields for recv/recvmsg io_uring: check reserved fields for send/sendmsg
2022-04-29Merge tag 'random-5.18-rc5-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator fixes from Jason Donenfeld: - Eric noticed that the memmove() in crng_fast_key_erasure() was bogus, so this has been changed to a memcpy() and the confusing situation clarified with a detailed comment. - [Half]SipHash documentation updates from Bagas and Eric, after Eric pointed out that the use of HalfSipHash in random.c made a bit of the text potentially misleading. * tag 'random-5.18-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: Documentation: siphash: disambiguate HalfSipHash algorithm from hsiphash functions Documentation: siphash: enclose HalfSipHash usage example in the literal block Documentation: siphash: convert danger note to warning for HalfSipHash random: document crng_fast_key_erasure() destination possibility
2022-04-29Merge tag 'ceph-for-5.18-rc5' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph client fixes from Ilya Dryomov: "A fix for a NULL dereference that turns out to be easily triggerable by fsync (marked for stable) and a false positive WARN and snap_rwsem locking fixups" * tag 'ceph-for-5.18-rc5' of https://github.com/ceph/ceph-client: ceph: fix possible NULL pointer dereference for req->r_session ceph: remove incorrect session state check ceph: get snap_rwsem read lock in handle_cap_export for ceph_add_cap libceph: disambiguate cluster/pool full log message
2022-04-29Revert "arm: dts: at91: Fix boolean properties with values"Arnd Bergmann
This reverts commit 0dc23d1a8e17, which caused another regression as the pinctrl code actually expects an integer value of 0 or 1 rather than a simple boolean property. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29KVM: x86: work around QEMU issue with synthetic CPUID leavesPaolo Bonzini
Synthesizing AMD leaves up to 0x80000021 caused problems with QEMU, which assumes the *host* CPUID[0x80000000].EAX is higher or equal to what KVM_GET_SUPPORTED_CPUID reports. This causes QEMU to issue bogus host CPUIDs when preparing the input to KVM_SET_CPUID2. It can even get into an infinite loop, which is only terminated by an abort(): cpuid_data is full, no space for cpuid(eax:0x8000001d,ecx:0x3e) To work around this, only synthesize those leaves if 0x8000001d exists on the host. The synthetic 0x80000021 leaf is mostly useful on Zen2, which satisfies the condition. Fixes: f144c49e8c39 ("KVM: x86: synthesize CPUID leaf 0x80000021h if useful") Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-29Merge tag 'perf-tools-fixes-for-v5.18-2022-04-29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix Intel PT (Processor Trace) timeless decoding with perf.data directory. - ARM SPE (Statistical Profiling Extensions) address fixes, for synthesized events and for SPE events with physical addresses. Add a simple 'perf test' entry to make sure this doesn't regress. - Remove arch specific processing of kallsyms data to fixup symbol end address, fixing excessive memory consumption in the annotation code. * tag 'perf-tools-fixes-for-v5.18-2022-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf symbol: Remove arch__symbols__fixup_end() perf symbol: Update symbols__fixup_end() perf symbol: Pass is_kallsyms to symbols__fixup_end() perf test: Add perf_event_attr test for Arm SPE perf arm-spe: Fix SPE events with phys addresses perf arm-spe: Fix addresses of synthesized SPE events perf intel-pt: Fix timeless decoding with perf.data directory
2022-04-29Merge tag 'riscv-for-linus-5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A fix to properly ensure a single CPU is running during patch_text(). - A defconfig update to include RPMSG_CTRL when RPMSG_CHAR was set, necessary after a recent refactoring. * tag 'riscv-for-linus-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: configs: Configs that had RPMSG_CHAR now get RPMSG_CTRL riscv: patch_text: Fixup last cpu should be master
2022-04-29Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Will Deacon: "Rename and reallocate the PT_ARM_MEMTAG_MTE ELF segment type. This is a fix to the MTE ELF ABI for a bug that was added during the most recent merge window as part of the coredump support. The issue is that the value assigned to the new PT_ARM_MEMTAG_MTE segment type has already been allocated to PT_AARCH64_UNWIND by the ELF ABI, so we've bumped the value and changed the name of the identifier to be better aligned with the existing one" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: elf: Fix the arm64 MTE ELF segment name and value
2022-04-29Revert "x86/mm: Introduce lookup_address_in_mm()"Sean Christopherson
Drop lookup_address_in_mm() now that KVM is providing it's own variant of lookup_address_in_pgd() that is safe for use with user addresses, e.g. guards against page tables being torn down. A variant that provides a non-init mm is inherently dangerous and flawed, as the only reason to use an mm other than init_mm is to walk a userspace mapping, and lookup_address_in_pgd() does not play nice with userspace mappings, e.g. doesn't disable IRQs to block TLB shootdowns and doesn't use READ_ONCE() to ensure an upper level entry isn't converted to a huge page between checking the PAGE_SIZE bit and grabbing the address of the next level down. This reverts commit 13c72c060f1ba6f4eddd7b1c4f52a8aded43d6d9. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <YmwIi3bXr/1yhYV/@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-29Merge branch 'kvm-fixes-for-5.18-rc5' into HEADPaolo Bonzini
Fixes for (relatively) old bugs, to be merged in both the -rc and next development trees: * Fix potential races when walking host page table * Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT * Fix shadow page table leak when KVM runs nested
2022-04-29KVM: x86/mmu: fix potential races when walking host page tableMingwei Zhang
KVM uses lookup_address_in_mm() to detect the hugepage size that the host uses to map a pfn. The function suffers from several issues: - no usage of READ_ONCE(*). This allows multiple dereference of the same page table entry. The TOCTOU problem because of that may cause KVM to incorrectly treat a newly generated leaf entry as a nonleaf one, and dereference the content by using its pfn value. - the information returned does not match what KVM needs; for non-present entries it returns the level at which the walk was terminated, as long as the entry is not 'none'. KVM needs level information of only 'present' entries, otherwise it may regard a non-present PXE entry as a present large page mapping. - the function is not safe for mappings that can be torn down, because it does not disable IRQs and because it returns a PTE pointer which is never safe to dereference after the function returns. So implement the logic for walking host page tables directly in KVM, and stop using lookup_address_in_mm(). Cc: Sean Christopherson <seanjc@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Message-Id: <20220429031757.2042406-1-mizhang@google.com> [Inline in host_pfn_mapping_level, ensure no semantic change for its callers. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-29KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENTPaolo Bonzini
When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags member that at the time was unused. Unfortunately this extensibility mechanism has several issues: - x86 is not writing the member, so it would not be possible to use it on x86 except for new events - the member is not aligned to 64 bits, so the definition of the uAPI struct is incorrect for 32- on 64-bit userspace. This is a problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately usage of flags was only introduced in 5.18. Since padding has to be introduced, place a new field in there that tells if the flags field is valid. To allow further extensibility, in fact, change flags to an array of 16 values, and store how many of the values are valid. The availability of the new ndata field is tied to a system capability; all architectures are changed to fill in the field. To avoid breaking compilation of userspace that was using the flags field, provide a userspace-only union to overlap flags with data[0]. The new field is placed at the same offset for both 32- and 64-bit userspace. Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Message-Id: <20220422103013.34832-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 13:55:23 +0000