summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-17qtnfmac: decrease default Tx queue sizeSergey Matyukevich
Avoid extra buffering in driver by default. Use max hardware Tx queue size. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17qtnfmac: skb2rbd_attach cleanupSergey Matyukevich
Update PCIE_HDP_TX_HOST_Q_WR_PTR register in skb2rbd_attach as a part of procedure of passing new Rx buffer to hardware. Sync up all the the qtnf_rx_bd descriptor updates before passing Rx buffer to hardware. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17qtnfmac: use __netdev_alloc_skb_ip_alignSergey Matyukevich
Replace __dev_alloc_skb and explicit NET_IP_ALIGN alignment by built-in __netdev_alloc_skb_ip_align function. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17qtnfmac: switch to napi_gro_receiveSergey Matyukevich
Use napi_gro_receive() rather than netif_receive_skb() to improve performance when GRO is enabled. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17qtnfmac: remove unused qtnf_rx_frame declarationSergey Matyukevich
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17mwifiex: check for NL80211_SCAN_FLAG_RANDOM_ADDR during hidden SSID scanGanapathi Bhat
At the end of user scan request, driver will perform an active scan for hidden SSIDs in passive channels. While doing this, driver unconditionally adding random_mac in scan command, which is no expected. It should add random_mac only if scan_request has NL80211_SCAN_FLAG_RANDOM_ADDR flag set. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17mwifiex: do not use random MAC for pre-association scanningGanapathi Bhat
Driver should use random MAC address only if the scan is requested by user(provided NL80211_SCAN_FLAG_RANDOM_ADDR is set in scan request). It should not be used for a scan performed before association. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-11Merge tag 'iwlwifi-next-for-kalle-2017-08-11' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Sencond batch of iwlwifi patches for 4.14 * Some more code moved to a new directory; * Fixes in LED handling; * Some FW API updates; * General fixes and cleanups here and there.
2017-08-11brcm80211: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10mwifiex: uap: enable 11d based on userspace configruationXinming Hu
This patch check whether userspace beacon data include country ie, if so then download command to enable 11d setup in firmeare accordingly. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10zd1211rw: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10zd1201: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10rtl8192cu: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10rtl8xxxu: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10rtl8187: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10rt73usb: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10rt2800usb: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10rt2500usb: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10mt7601u: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10mwifiex: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10libertas_tf: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10libertas: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10p54: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10orinoco: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10at76c50x: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10carl9170: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10ar5523: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-09iwlwifi: mvm: fix the coex firmware APIEmmanuel Grumbach
The firmware API defined in the header files didn't match the structure that are actually passed by the firmware. The impact could be a decision for MIMO in Tx or Rx in coex scenarios. Fixes: 430a3bbafdc7 ("iwlwifi: mvm: BT Coex - new API") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: pcie: free the TSO page when a Tx queue is unmapped on A000 devicesEmmanuel Grumbach
When we unmap a non-empty Tx queue, we need to free the pages that we allocated for the headers in TSO flows. This code existed for the 9000 device family, but somehow it got left out when the new Tx path for the A000 devices was written. Fixes: 2b0c5946d9ed ("iwlwifi: pcie: introduce a000 TX queues management") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: remove references to unsupported HWLuca Coelho
There are still some references to 3945 and 4965 HW, which were never supported in iwlwifi. These references were inherited from a previous project and are irrelevant here. Additionally, remove some irrelevant references to 5100 HW. Remove all these. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: fix nmi triggering from hostGolan Ben-Ami
Although nmi was triggered fine till now, it appears that the driver didn't write the exact correct values to the correct addresses for each HW. Fix the nmi triggering by setting the correct addresses and values. Fixes: 4c9706dc2f29 ("iwlwifi: update nmi register") Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: pcie: don't init a Tx queue with an SSN > size of the queueEmmanuel Grumbach
The TVQM tells us the initial write pointer for a queue, but that write pointer is in WiFi sequence number unit and not in TFD index unit. Which means that the write pointer in the TVQM's response can be bigger than the Tx queue ring size. Fix that by modulo'ing the write pointer from the TVQM with the Tx queue size. Fixes: 66128fa08806 ("iwlwifi: move to TVQM mode") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: add station before allocating a queueShaul Triebitz
One of the queue config params is the associated station id. Hence the FW must know about the station prior to the queue allocation. In a000 devices, allocating a queue without a valid station results with assert 0x2B00. In FW restart flow the queues are allocated before adding the station so first add the station. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: don't send CTDP commands via debugfs if not supportedMatt Chen
Fix this issue if it is not supported by the firmware. Fixes: 00f481bd895a ("iwlwifi: mvm: add ctdp operations to debugfs") Signed-off-by: Matt Chen <matt.chen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: support new beacon template commandHaim Dreyfuss
Support a new version of the beacon template command. This replaces v8 of the command, which was missing the rate code. Also, export rate decision logic to a separate function. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: set the default cTDP budgetChaya Rachel Ivgi
In case there is no value received from BIOS for cTDP budget, the default should be 2000 mWatt. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: move a000 device NVM retrieval to a common placeShaul Triebitz
Getting the NVM data in a000 devices should be shared across operation mode. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: dump smem configuration when firmware crashesGolan Ben-Ami
Add the smem configuration to the fw data dump, once the firmware crashes. This is useful mainly for later parsing of the smem. Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: fix a000 RF_ID defineLiad Kaufman
One of the defines has a wrong value. Fixes: 1afb0ae42174 ("iwlwifi: allow combining different phy images with mac images") Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: add support of FPGA fwTzipi Peres
Load FW according to NIC type, taking into account simulation, if exists. This is determined by a prph register. Signed-off-by: Tzipi Peres <tzipi.peres@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: fix a few instances of misaligned kerneldoc parametersLuca Coelho
There are a few places where we don't have a space between the * and the @ in the parameter description. Also, in one case, the @ had trailing space before the parameter name. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: change functions that can only return 0 to voidSharon Dvir
Change iwl_set_ucode_api_flags(), iwl_set_ucode_capabilities() to be void. No need to check returned values. Found by Klocwork. Signed-off-by: Sharon Dvir <sharon.dvir@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: add debugfs to force CT-killChaya Rachel Ivgi
CT-kill is a thermal-based "RF-kill", which disables the NIC completely if the temperature gets too high, in order to avoid damage. Add a debugfs entry to simulate high temperatures, in order to test CT-kill flows in the driver without having to physically heat the device up. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: add const to thermal_cooling_device_ops structureBhumika Goyal
Declare thermal_cooling_device_ops structure as const as it is only passed as an argument to the function thermal_cooling_device_register and this argument is of type const. So, declare the structure as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: use firmware LED command where applicableJohannes Berg
On devices starting from 8000 series, the host can no longer toggle the LED through the CSR_LED_REG register, but must do it via the firmware instead. Add support for this. Note that this means that the LED cannot be turned on while the firmware is off, so using an arbitrary LED trigger may not work as expected. Fixes: 503ab8c56ca0 ("iwlwifi: Add 8000 HW family support") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: remove useless condition in LED codeJohannes Berg
If the module parameter is set to disable the LED, we leave the initialization routine before setting the LEDS_INIT_COMPLETE status bit. Therefore, there's no need to check the parameter again on exit, just the status check is sufficient. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-08rt2x00: Fix MMIC CountermeasuresMichael Skeffington
Set RX_FLAG_DECRYPTED in case of MMIC failure so that ieee80211_rx_h_decrypt() doesnt drop the frame before getting to ieee80211_rx_h_michael_mic_verify(). Signed-off-by: Michael Skeffington <mike@astro.ai> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rtlwifi: constify rate_control_ops structureBhumika Goyal
rate_control_ops structure is only passed as an argument to the function ieee80211_rate_control_{register/unregister}. This argument is of type const, so declare the structure as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08wlcore: add const to bin_attribute structureBhumika Goyal
Add const to bin_attribute structure as it is only passed to the functions sysfs_{remove/create}_bin_file. The corresponding arguments are of type const, so declare the structure to be const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08brcmfmac: add setting carrier state ON for successful roamingChung-Hsien Hsu
After association, ping is not working when sweeping the channel at the AP side. It is caused by having incorrect carrier state (OFF) for the STA in successful roaming. This patch sets the carrier state ON for the case. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 19:58:08 +0000