| Age | Commit message (Collapse) | Author |
|---|
|
Allow the power-domains property to the PWM_DISP block as on some SoCs
this does need at most one power domain.
Fixes: b09b179bac0a ("dt-bindings: pwm: Convert pwm-mtk-disp.txt to mediatek,pwm-disp.yaml format")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240404081808.92199-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
With 16 channel pwm support, we're registering two instances of pwm_chip
with 8 channels each. We need to update PM functions to use both instances
of pwm_chip during power state transitions.
Introduce struct dwc_pwm_drvdata and use it as driver_data, which will
maintain both instances of pwm_chip along with dwc_pwm_info and allow us
to use them inside suspend/resume handles.
Fixes: ebf2c89eb95e ("pwm: dwc: Add 16 channel support for Intel Elkhart Lake")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240415074051.14681-1-raag.jadav@intel.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
We only pool write combined and uncached allocations because they
require extra overhead on allocation and release.
If we also pool cached NUMA it not only means some extra unnecessary
overhead, but also that under memory pressure it can happen that
pages from the wrong NUMA node enters the pool and are re-used
over and over again.
This can lead to performance reduction after running into memory
pressure.
v2: restructure and cleanup the code a bit from the internal hack to
test this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 4482d3c94d7f ("drm/ttm: add NUMA node id to the pool")
CC: stable@vger.kernel.org
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415134821.1919-1-christian.koenig@amd.com
|
|
Upon reviewing the flower control flags handling in
this driver, I notice that the key wasn't being used,
only the mask.
Ie. `tc flower ... ip_flags nofrag` was hardware
offloaded as `... ip_flags frag`.
Only compile tested, no access to HW.
Fixes: c672e3727989 ("octeontx2-pf: Add support to filter packet based on IP fragment")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit under Fixes optimized the number of recv() calls
needed during RTM_GETROUTE dumps, but we got multiple
reports of applications hanging on recv() calls.
Applications expect that a route dump will be terminated
with a recv() reading an individual NLM_DONE message.
Coalescing NLM_DONE is perfectly legal in netlink,
but even tho reporters fixed the code in respective
projects, chances are it will take time for those
applications to get updated. So revert to old behavior
(for now)?
Old kernel (5.19):
$ ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \
--dump getroute --json '{"rtm-family": 2}'
Recv: read 692 bytes, 11 messages
nl_len = 68 (52) nl_flags = 0x22 nl_type = 24
...
nl_len = 60 (44) nl_flags = 0x22 nl_type = 24
Recv: read 20 bytes, 1 messages
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
Before (6.9-rc2):
$ ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \
--dump getroute --json '{"rtm-family": 2}'
Recv: read 712 bytes, 12 messages
nl_len = 68 (52) nl_flags = 0x22 nl_type = 24
...
nl_len = 60 (44) nl_flags = 0x22 nl_type = 24
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
After:
$ ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \
--dump getroute --json '{"rtm-family": 2}'
Recv: read 692 bytes, 11 messages
nl_len = 68 (52) nl_flags = 0x22 nl_type = 24
...
nl_len = 60 (44) nl_flags = 0x22 nl_type = 24
Recv: read 20 bytes, 1 messages
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/all/20240315124808.033ff58d@elisabeth
Reported-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://lore.kernel.org/all/02b50aae-f0e9-47a4-8365-a977a85975d3@ovn.org
Fixes: 4ce5dc9316de ("inet: switch inet_dump_fib() to RCU protection")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit adds kernel-doc style comments with complete parameter
descriptions for the function cuse_process_init_reply.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When Output Resource (dcb->or) value is assigned in
fabricate_dcb_output(), there may be out of bounds access to
dac_users array in case dcb->or is zero because ffs(dcb->or) is
used as index there.
The 'or' argument of fabricate_dcb_output() must be interpreted as a
number of bit to set, not value.
Utilize macros from 'enum nouveau_or' in calls instead of hardcoding.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2e5702aff395 ("drm/nouveau: fabricate DCB encoder table for iMac G4")
Fixes: 670820c0e6a9 ("drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.")
Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240411110854.16701-1-m.kobuk@ispras.ru
|
|
Running a lot of VK CTS in parallel against nouveau, once every
few hours you might see something like this crash.
BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27
Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021
RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau]
Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1
RSP: 0000:ffffac20c5857838 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001
RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180
RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10
R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c
R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c
FS: 00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
...
? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau]
? gp100_vmm_pgt_mem+0x37/0x180 [nouveau]
nvkm_vmm_iter+0x351/0xa20 [nouveau]
? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau]
? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
? __lock_acquire+0x3ed/0x2170
? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau]
? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau]
? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
nvkm_vmm_map_locked+0x224/0x3a0 [nouveau]
Adding any sort of useful debug usually makes it go away, so I hand
wrote the function in a line, and debugged the asm.
Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in
the nv50_instobj_acquire called from nvkm_kmap.
If Thread A and Thread B both get to nv50_instobj_acquire around
the same time, and Thread A hits the refcount_set line, and in
lockstep thread B succeeds at refcount_inc_not_zero, there is a
chance the ptrs value won't have been stored since refcount_set
is unordered. Force a memory barrier here, I picked smp_mb, since
we want it on all CPUs and it's write followed by a read.
v2: use paired smp_rmb/smp_wmb.
Cc: <stable@vger.kernel.org>
Fixes: be55287aa5ba ("drm/nouveau/imem/nv50: embed nvkm_instobj directly into nv04_instobj")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240411011510.2546857-1-airlied@gmail.com
|
|
FUSE attempts to detect server support for statx by trying it once and
setting no_statx=1 if it fails with ENOSYS, but consider the following
scenario:
- Userspace (e.g. sh) calls stat() on a file
* succeeds
- Userspace (e.g. lsd) calls statx(BTIME) on the same file
- request_mask = STATX_BASIC_STATS | STATX_BTIME
- first pass: sync=true due to differing cache_mask
- statx fails and returns ENOSYS
- set no_statx and retry
- retry sets mask = STATX_BASIC_STATS
- now mask == cache_mask; sync=false (time_before: still valid)
- so we take the "else if (stat)" path
- "err" is still ENOSYS from the failed statx call
Fix this by zeroing "err" before retrying the failed call.
Fixes: d3045530bdd2 ("fuse: implement statx")
Cc: stable@vger.kernel.org # v6.6
Signed-off-by: Danny Lin <danny@orbstack.dev>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Parallel dio write takes a negative refcount of fi->iocachectr and so does
open of file in passthrough mode.
The refcount of passthrough mode is associated with attach/detach of a
fuse_backing object to fuse inode.
For parallel dio write, the backing file is irrelevant, so the call to
fuse_inode_uncached_io_start() passes a NULL fuse_backing object.
Passing a NULL fuse_backing will result in false -EBUSY error if the file
is already open in passthrough mode.
Allow taking negative fi->iocachectr refcount with NULL fuse_backing,
because it does not conflict with an already attached fuse_backing object.
Fixes: 4a90451bbc7f ("fuse: implement open in passthrough mode")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There is a confusion with fuse_file_uncached_io_{start,end} interface.
These helpers do two things when called from passthrough open()/release():
1. Take/drop negative refcount of fi->iocachectr (inode uncached io mode)
2. State change ff->iomode IOM_NONE <-> IOM_UNCACHED (file uncached open)
The calls from parallel dio write path need to take a reference on
fi->iocachectr, but they should not be changing ff->iomode state, because
in this case, the fi->iocachectr reference does not stick around until file
release().
Factor out helpers fuse_inode_uncached_io_{start,end}, to be used from
parallel dio write path and rename fuse_file_*cached_io_{start,end} helpers
to fuse_file_*cached_io_{open,release} to clarify the difference.
Fixes: 205c1d802683 ("fuse: allow parallel dio writes with FUSE_DIRECT_IO_ALLOW_MMAP")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
EM060K_129, EM060K_12a, EM060K_12b and EM0060K_12c are EM060K's sub-models,
having the same name "Quectel EM060K-GL" and the same interface layout.
MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0129 Rev= 5.04
S: Manufacturer=Quectel
S: Product=Quectel EM060K-GL
S: SerialNumber=f6fa08b6
C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Jerry Meng <jerry-meng@foxmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Update the USB serial option driver support for the Fibocom
FM135-GL LTE modules.
- VID:PID 2cb7:0115, FM135-GL for laptop debug M.2 cards(with MBIM
interface for /Linux/Chrome OS)
0x0115: mbim, diag, at, pipe
Here are the outputs of usb-devices:
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0115 Rev=05.15
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom Module
S: SerialNumber=12345678
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: bolan wang <bolan.wang@fibocom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.9-rc5
This includes following USB4/Thunderbolt fixes for v6.9-rc5:
- Avoid creating DisplayPort tunnels for the adapters on the same router
- Correct wake configurations after device router unplug
- Fix immediate wake when "wakeup_count" is used to enter system sleep.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Avoid notify PM core about runtime PM resume
thunderbolt: Fix wake configurations after device unplug
thunderbolt: Do not create DisplayPort tunnels on adapters of the same router
|
|
Update the kerneldoc comment for uio_interrupt_handler and add one for
uio_interrupt_thread.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/oe-kbuild-all/202404112227.mIATKoTb-lkp@intel.com/
Fixes: f8a27dfa4b82 ("uio: use threaded interrupts")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20240414215220.2424597-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a small (64 bit) per-device bitmap that tracks ranges that
have btree nodes, for accelerating btree node scan if it is ever needed.
- New helpers, bch2_dev_btree_bitmap_marked() and
bch2_dev_bitmap_mark(), for checking and updating the bitmap
- Interior btree update path updates the bitmaps when required
- The check_allocations pass has a new fsck_err check,
btree_bitmap_not_marked
- New on disk format version, mi_btree_mitmap, which indicates the new
bitmap is present
- Upgrade table lists the required recovery pass and expected fsck error
- Btree node scan uses the bitmap to skip ranges if we're on the new
version
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a sysfs knob for immediately flushing the entire journal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We shouldn't be doing the unlock/relock dance when we're not using a
path - this fixes an assertion pop when called from btree node scan.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For forwards compatibilyt, we allow bkeys of unknown type in leaf nodes;
we can simply ignore metadata we don't understand. Pointers to btree
nodes must always be of known types, howwever.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull sysfs fix from Al Viro:
"Get rid of lockdep false positives around sysfs/overlayfs
syzbot has uncovered a class of lockdep false positives for setups
with sysfs being one of the backing layers in overlayfs. The root
cause is that of->mutex allocated when opening a sysfs file read-only
(which overlayfs might do) is confused with of->mutex of a file opened
writable (held in write to sysfs file, which overlayfs won't do).
Assigning them separate lockdep classes fixes that bunch and it's
obviously safe"
* tag 'pull-sysfs-annotation-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kernfs: annotate different lockdep class for of->mutex of writable files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Follow up fixes for the BHI mitigations code
- Fix !SPECULATION_MITIGATIONS bug not turning off mitigations as
expected
- Work around an APIC emulation bug when the kernel is built with Clang
and run as a SEV guest
- Follow up x86 topology fixes
* tag 'x86-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Move TOPOEXT enablement into the topology parser
x86/cpu/amd: Make the NODEID_MSR union actually work
x86/cpu/amd: Make the CPUID 0x80000008 parser correct
x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI
x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto
x86/bugs: Clarify that syscall hardening isn't a BHI mitigation
x86/bugs: Fix BHI handling of RRSBA
x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr'
x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES
x86/bugs: Fix BHI documentation
x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n
x86/topology: Don't update cpu_possible_map in topo_set_cpuids()
x86/bugs: Fix return type of spectre_bhi_state()
x86/apic: Force native_apic_mem_read() to use the MOV instruction
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
- Address a (valid) W=1 build warning
- Fix timer self-tests
- Annotate a KCSAN warning wrt. accesses to the tick_do_timer_cpu
global variable
- Address a !CONFIG_BUG build warning
* tag 'timers-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: kselftest: Fix build failure with NOLIBC
selftests: timers: Fix abs() warning in posix_timers test
selftests: kselftest: Mark functions that unconditionally call exit() as __noreturn
selftests: timers: Fix posix_timers ksft_print_msg() warning
selftests: timers: Fix valid-adjtimex signed left-shift undefined behavior
bug: Fix no-return-statement warning with !CONFIG_BUG
timekeeping: Use READ/WRITE_ONCE() for tick_do_timer_cpu
selftests/timers/posix_timers: Reimplement check_timer_distribution()
irqflags: Explicitly ignore lockdep_hrtimer_exit() argument
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix the x86 PMU multi-counter code returning invalid data in certain
circumstances"
* tag 'perf-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix out of range data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix a PREEMPT_RT build bug"
* tag 'locking-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Make rwsem_assert_held_write_nolockdep() build with PREEMPT_RT=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix a bug in the GIC irqchip driver"
* tag 'irq-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Fix VSYNC referencing an unmapped VPE on GIC v4.1
|
|
Pull virtio bugfixes from Michael Tsirkin:
"Some small, obvious (in hindsight) bugfixes:
- new ioctl in vhost-vdpa has a wrong # - not too late to fix
- vhost has apparently been lacking an smp_rmb() - due to code
duplication :( The duplication will be fixed in the next merge
cycle, this is a minimal fix
- an error message in vhost talks about guest moving used index -
which of course never happens, guest only ever moves the available
index
- i2c-virtio didn't set the driver owner so it did not get refcounted
correctly"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: correct misleading printing information
vhost-vdpa: change ioctl # for VDPA_GET_VRING_SIZE
virtio: store owner from modules with register_virtio_driver()
vhost: Add smp_rmb() in vhost_enable_notify()
vhost: Add smp_rmb() in vhost_vq_avail_empty()
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- fix up swiotlb buffer padding even more (Petr Tesarik)
- fix for partial dma_sync on swiotlb (Michael Kelley)
- swiotlb debugfs fix (Dexuan Cui)
* tag 'dma-maping-6.9-2024-04-14' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: do not set total_used to 0 in swiotlb_create_debugfs_files()
swiotlb: fix swiotlb_bounce() to do partial sync's correctly
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary
|
|
Add FAULT_INJECTION_DEBUG_FS and FAILSLAB configurations to the kconfig
fragment for the iommfd selftests. These kconfigs are needed by the
iommufd_fail_nth test.
Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Link: https://lore.kernel.org/r/20240325090048.1423908-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Some kconfigs don't automatically include this symbol which results in sub
functions for some of the dirty tracking related things that are
non-functional. Thus the test suite will fail. select IOMMUFD_DRIVER in
the IOMMUFD_TEST kconfig to fix it.
Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Link: https://lore.kernel.org/r/20240327182050.GA1363414@ziepe.ca
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The commit fc8b2a619469
("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
adds check of potential number of UDP segments vs
UDP_MAX_SEGMENTS in linux/virtio_net.h.
After this change certification test of USO guest-to-guest
transmit on Windows driver for virtio-net device fails,
for example with packet size of ~64K and mss of 536 bytes.
In general the USO should not be more restrictive than TSO.
Indeed, in case of unreasonably small mss a lot of segments
can cause queue overflow and packet loss on the destination.
Limit of 128 segments is good for any practical purpose,
with minimal meaningful mss of 536 the maximal UDP packet will
be divided to ~120 segments.
The number of segments for UDP packets is validated vs
UDP_MAX_SEGMENTS also in udp.c (v4,v6), this does not affect
quest-to-guest path but does affect packets sent to host, for
example.
It is important to mention that UDP_MAX_SEGMENTS is kernel-only
define and not available to user mode socket applications.
In order to request MSS smaller than MTU the applications
just uses setsockopt with SOL_UDP and UDP_SEGMENT and there is
no limitations on socket API level.
Fixes: fc8b2a619469 ("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On the time to free xbc memory in xbc_exit(), memblock may has handed
over memory to buddy allocator. So it doesn't make sense to free memory
back to memblock. memblock_free() called by xbc_exit() even causes UAF bugs
on architectures with CONFIG_ARCH_KEEP_MEMBLOCK disabled like x86.
Following KASAN logs shows this case.
This patch fixes the xbc memory free problem by calling memblock_free()
in early xbc init error rewind path and calling memblock_free_late() in
xbc exit path to free memory to buddy allocator.
[ 9.410890] ==================================================================
[ 9.418962] BUG: KASAN: use-after-free in memblock_isolate_range+0x12d/0x260
[ 9.426850] Read of size 8 at addr ffff88845dd30000 by task swapper/0/1
[ 9.435901] CPU: 9 PID: 1 Comm: swapper/0 Tainted: G U 6.9.0-rc3-00208-g586b5dfb51b9 #5
[ 9.446403] Hardware name: Intel Corporation RPLP LP5 (CPU:RaptorLake)/RPLP LP5 (ID:13), BIOS IRPPN02.01.01.00.00.19.015.D-00000000 Dec 28 2023
[ 9.460789] Call Trace:
[ 9.463518] <TASK>
[ 9.465859] dump_stack_lvl+0x53/0x70
[ 9.469949] print_report+0xce/0x610
[ 9.473944] ? __virt_addr_valid+0xf5/0x1b0
[ 9.478619] ? memblock_isolate_range+0x12d/0x260
[ 9.483877] kasan_report+0xc6/0x100
[ 9.487870] ? memblock_isolate_range+0x12d/0x260
[ 9.493125] memblock_isolate_range+0x12d/0x260
[ 9.498187] memblock_phys_free+0xb4/0x160
[ 9.502762] ? __pfx_memblock_phys_free+0x10/0x10
[ 9.508021] ? mutex_unlock+0x7e/0xd0
[ 9.512111] ? __pfx_mutex_unlock+0x10/0x10
[ 9.516786] ? kernel_init_freeable+0x2d4/0x430
[ 9.521850] ? __pfx_kernel_init+0x10/0x10
[ 9.526426] xbc_exit+0x17/0x70
[ 9.529935] kernel_init+0x38/0x1e0
[ 9.533829] ? _raw_spin_unlock_irq+0xd/0x30
[ 9.538601] ret_from_fork+0x2c/0x50
[ 9.542596] ? __pfx_kernel_init+0x10/0x10
[ 9.547170] ret_from_fork_asm+0x1a/0x30
[ 9.551552] </TASK>
[ 9.555649] The buggy address belongs to the physical page:
[ 9.561875] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x45dd30
[ 9.570821] flags: 0x200000000000000(node=0|zone=2)
[ 9.576271] page_type: 0xffffffff()
[ 9.580167] raw: 0200000000000000 ffffea0011774c48 ffffea0012ba1848 0000000000000000
[ 9.588823] raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
[ 9.597476] page dumped because: kasan: bad access detected
[ 9.605362] Memory state around the buggy address:
[ 9.610714] ffff88845dd2ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.618786] ffff88845dd2ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.626857] >ffff88845dd30000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.634930] ^
[ 9.638534] ffff88845dd30080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.646605] ffff88845dd30100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.654675] ==================================================================
Link: https://lore.kernel.org/all/20240414114944.1012359-1-qiang4.zhang@linux.intel.com/
Fixes: 40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed")
Cc: Stable@vger.kernel.org
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
The writable file /sys/power/resume may call vfs lookup helpers for
arbitrary paths and readonly files can be read by overlayfs from vfs
helpers when sysfs is a lower layer of overalyfs.
To avoid a lockdep warning of circular dependency between overlayfs
inode lock and kernfs of->mutex, use a different lockdep class for
writable and readonly kernfs files.
Reported-by: syzbot+9a5b0ced8b1bfb238b56@syzkaller.appspotmail.com
Fixes: 0fedefd4c4e3 ("kernfs: sysfs: support custom llseek method for sysfs entries")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Confusingly, X86_FEATURE_RETPOLINE doesn't mean retpolines are enabled,
as it also includes the original "AMD retpoline" which isn't a retpoline
at all.
Also replace cpu_feature_enabled() with boot_cpu_has() because this is
before alternatives are patched and cpu_feature_enabled()'s fallback
path is slower than plain old boot_cpu_has().
Fixes: ec9404e40e8f ("x86/bhi: Add BHI mitigation knob")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/ad3807424a3953f0323c011a643405619f2a4927.1712944776.git.jpoimboe@kernel.org
|
|
The btree write buffer flush fastpath that avoids the main transaction
commit path had the unfortunate side effect of not doing btree node
merging.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There's been a bug in the btree write buffer where it wasn't triggering
btree node merges - and leaving behind a bunch of nearly empty btree
nodes.
Then during journal replay, when updates to the backpointers btree
aren't using the btree write buffer (because we require synchronization
with journal replay), we end up doing those merges all at once.
Then if it's the interior update path running them, we deadlock because
those run with the highest watermark.
There's no real need for the interior update path to be doing btree node
merges; other code paths can handle that at lower watermarks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a deadlock where the interior update path during journal
replay ends up doing a ton of merges on the backpointers btree, and
deadlocking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_journal_flush_seq requires us to have a write ref
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_key_can_insert_cached() should be checking the watermark -
BCH_TRANS_COMMIT_journal_replay really means nonblocking mode when
watermark < reclaim, it was being used incorrectly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a bug where we fail to start when upgrading/downgrading
because we forgot we needed to go rw.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
many nodes found during scan will be old nodes, overwritten by newer
nodes
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
.to_text() functions need to work on key values that didn't pass .valid
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Need to check if we have a valid bucket before checking if ptr is stale
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
add missing validation; fixes assertion pop in bkey unpack
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
