summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-23net: dsa: add port STP state helperVivien Didelot
Add a void helper to set the STP state of a port, checking first if the required routine is provided by the driver. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23drivers: net: xgene: Fix MSS programmingIyappan Subramanian
Current driver programs static value of MSS in hardware register for TSO offload engine to segment the TCP payload regardless the MSS value provided by network stack. This patch fixes this by programming hardware registers with the stack provided MSS value. Since the hardware has the limitation of having only 4 MSS registers, this patch uses reference count of mss values being used. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Toan Le <toanle@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23rxrpc: Should be using ktime_add_ms() not ktime_add_ns()David Howells
ktime_add_ms() should be used to add the resend time (in ms) rather than ktime_add_ns(). Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Make sure sendmsg() is woken on call completionDavid Howells
Make sure that sendmsg() gets woken up if the call it is waiting for completes abnormally. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Don't send an ACK at the end of service call response transmissionDavid Howells
Don't send an IDLE ACK at the end of the transmission of the response to a service call. The service end resends DATA packets until the client sends an ACK that hard-acks all the send data. At that point, the call is complete. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Preset timestamp on Tx sk_buffsDavid Howells
Set the timestamp on sk_buffs holding packets to be transmitted before queueing them because the moment the packet is on the queue it can be seen by the retransmission algorithm - which may see a completely random timestamp. If the retransmission algorithm sees such a timestamp, it may retransmit the packet and, in future, tell the congestion management algorithm that the retransmit timer expired. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23cxgb4: fix signed wrap around when decrementing index idxColin Ian King
Change predecrement compare to post decrement compare to avoid an unsigned integer wrap-around comparison when decrementing idx in the while loop. For example, when idx is zero, the current situation will predecrement idx in the while loop, wrapping idx to the maximum signed integer and cause out of bounds reads on rxq_info->msix_tbl[idx]. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23Merge branch 'mlx5-sriov-vlan-push-pop'David S. Miller
Saeed Mahameed says: ==================== Mellanox 100G SRIOV offloads vlan push/pop From Or Gerlitz: This series further enhances the SRIOV TC offloads of mlx5 to handle the TC vlan push and pop actions. This serves a common use-case in virtualization systems where the virtual switch add (push) vlan tags to packets sent from VMs and removes (pop) vlan tags before the packet is received by the VM. We use the new E-Switch switchdev mode and the TC vlan action to achieve that also in SW defined SRIOV environments by offloading TC rules that contain this action along with forwarding (TC mirred/redirect action) the packet. In the first patch we add some helpers to access the TC vlan action info by offloading drivers. The next five patches don't add any new functionality, they do some refactoring and cleanups in the current code to be used next. The seventh patch deals with supporting vlans by the mlx5 e-switch in switchdev mode. The eighth patch does the vlan action offload from TC and the last patch adds matching for vlans as typically required by TC flows that involve vlan pop action. The series was applied on top of commit 524605e "cxgb4: Convert to use simple_open()" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net/mlx5e: Add TC vlan match parsingOr Gerlitz
Enhance the parsing of offloaded TC rules matches to handle vlans. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net/mlx5e: Add TC vlan action for SRIOV offloadsOr Gerlitz
Parse TC vlan actions and set the required elements to allow offloading. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net/mlx5: E-Switch, Support VLAN actions in the offloads modeOr Gerlitz
Many virtualization systems use a policy under which a vlan tag is pushed to packets sent by guests, and popped before the packet is forwarded to the VM. The current generation of the mlx5 HW doesn't fully support that on a per flow level. As such, we are addressing the above common use case with the SRIOV e-Switch abilities to push vlan into packets sent by VFs and pop vlan from packets forwarded to VFs. The HW can match on the correct vlan being present in packets forwarded to VFs (eSwitch steering is done before stripping the tag), so this part is offloaded as is. A common practice for vlans is to avoid both push vlan and pop vlan for inter-host VM/VM (east-west) communication because in this case, push on egress cancels out with pop on ingress. For supporting that, we use a global eswitch vlan pop policy, hence allowing guest A to communicate with both remote VM B and local VM C. This works since the HW pops the vlan only if it exists (e.g for C --> A packets but not for B --> A packets). On the slow path, when a VF vport has an offloaded flow which involves pushing vlans, wheres another flow is not currently offloaded, the packets from the 2nd flow seen by the VF representor on the host have vlan. The VF rep driver removes such vlan before calling into the host networking stack. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net/mlx5e: Refactor retrival of skb from rx completion element (cqe)Or Gerlitz
Factor the relevant code into a static inline helper (skb_from_cqe) doing that. Move the call to napi_gro_receive to be carried out just after mlx5e_complete_rx_cqe returns. Both changes are to be used for the VF representor as well in the next commit. This patch doesn't change any functionality. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net/mlx5: Put elements related to offloaded TC rule in one structOr Gerlitz
Put the representors related to the source and dest vports and the action in struct mlx5_esw_flow_attr which is used while setting the FDB rule. This patch doesn't change any functionality. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net/mlx5: E-Switch, Allow fine tuning of eswitch vport push/pop vlanOr Gerlitz
The HW can be programmed to push vlan, pop vlan or both. A factorization step towards using the push/pop capabilties in the eswitch offloads mode. This patch doesn't add new functionality. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net/mlx5: E-Switch, Set vport representor fields explicitly on registrationOr Gerlitz
The structure we use for the eswitch vport representor (mlx5_eswitch_rep) has some fields which are set from upper layers in the driver when they register the rep. Use explicit setting on registration time for them and avoid global memcpy. This patch doesn't add new functionality. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net/mlx5: E-Switch, Set the vport when registering the uplink repOr Gerlitz
Set the vport value in the PF entry to be that of the uplink so we can use it blindly over the tc / eswitch offload code without translating it each time we deal with the uplink representor. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net_sched: act_vlan: add helper inlines to access tcf_vlan infoOr Gerlitz
Needed e.g for offloading drivers to pick the relevant attributes. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net_sched: sch_fq: account for schedule/timers driftsEric Dumazet
It looks like the following patch can make FQ very precise, even in VM or stressed hosts. It matters at high pacing rates. We take into account the difference between the time that was programmed when last packet was sent, and current time (a drift of tens of usecs is often observed) Add an EWMA of the unthrottle latency to help diagnostics. This latency is the difference between current time and oldest packet in delayed RB-tree. This accounts for the high resolution timer latency, but can be different under stress, as fq_check_throttled() can be opportunistically be called from a dequeue() called after an enqueue() for a different flow. Tested: // Start a 10Gbit flow $ netperf --google-pacing-rate 1250000000 -H lpaa24 -l 10000 -- -K bbr & Before patch : $ sar -n DEV 10 5 | grep eth0 | grep Average Average: eth0 17106.04 756876.84 1102.75 1119049.02 0.00 0.00 0.52 After patch : $ sar -n DEV 10 5 | grep eth0 | grep Average Average: eth0 17867.00 800245.90 1151.77 1183172.12 0.00 0.00 0.52 A new iproute2 tc can output the 'unthrottle latency' : $ tc -s qd sh dev eth0 | grep latency 0 gc, 0 highprio, 32490767 throttled, 2382 ns latency Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23sfc: check async completer is !NULL before callingBert Kenward
Add a NULL check before calling asynchronous MCDI completion functions during device removal. Fixes: 7014d7f6 ("sfc: allow asynchronous MCDI without completion function") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23Merge branch 'sctp-fix-gap-ack-blocks'David S. Miller
Marcelo Ricardo Leitner says: ==================== sctp: fix the handling of SACK Gap Ack blocks sctp_acked() is using 32bit arithmetics on 16bits vars, via TSN_lte() macros, which is weird and confusing. Once the offset to ctsn is calculated, all wrapping is already handled and thus to verify the Gap Ack blocks we can just use pure less/big-or-equal than checks. Also, rename gap variable to tsn_offset, so it's more meaningful, as it doesn't point to any gap at all. Even so, I don't think this discrepancy resulted in any practical bug. This patch is a preparation for the next one, which will introduce typecheck() for TSN_lte() macros and would cause a compile error here. Suggested-by: David Laight <David.Laight@ACULAB.COM> Reported-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23sctp: improve how SSN, TSN and ASCONF serial are comparedMarcelo Ricardo Leitner
Make it similar to time_before() macros: - easier to understand - make use of typecheck() to avoid working on unexpected variable types (made the issue on previous patch visible) - for _[lg]te versions, slighly faster, as the compiler used to generate a sequence of cmp/je/cmp/js instructions and now it's sub/test/jle (for _lte): Before, for sctp_outq_sack: if (primary->cacc.changeover_active) { 1f01: 80 b9 84 02 00 00 00 cmpb $0x0,0x284(%rcx) 1f08: 74 6e je 1f78 <sctp_outq_sack+0xe8> u8 clear_cycling = 0; if (TSN_lte(primary->cacc.next_tsn_at_change, sack_ctsn)) { 1f0a: 8b 81 80 02 00 00 mov 0x280(%rcx),%eax return ((s) - (t)) & TSN_SIGN_BIT; } static inline int TSN_lte(__u32 s, __u32 t) { return ((s) == (t)) || (((s) - (t)) & TSN_SIGN_BIT); 1f10: 8b 7d bc mov -0x44(%rbp),%edi 1f13: 39 c7 cmp %eax,%edi 1f15: 74 25 je 1f3c <sctp_outq_sack+0xac> 1f17: 39 f8 cmp %edi,%eax 1f19: 78 21 js 1f3c <sctp_outq_sack+0xac> primary->cacc.changeover_active = 0; After: if (primary->cacc.changeover_active) { 1ee7: 80 b9 84 02 00 00 00 cmpb $0x0,0x284(%rcx) 1eee: 74 73 je 1f63 <sctp_outq_sack+0xf3> u8 clear_cycling = 0; if (TSN_lte(primary->cacc.next_tsn_at_change, sack_ctsn)) { 1ef0: 8b 81 80 02 00 00 mov 0x280(%rcx),%eax 1ef6: 2b 45 b4 sub -0x4c(%rbp),%eax 1ef9: 85 c0 test %eax,%eax 1efb: 7e 26 jle 1f23 <sctp_outq_sack+0xb3> primary->cacc.changeover_active = 0; *_lt() generated pretty much the same code. Tested with gcc (GCC) 6.1.1 20160621. This patch also removes SSN_lte as it is not used and cleanups some comments. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23sctp: fix the handling of SACK Gap Ack blocksMarcelo Ricardo Leitner
sctp_acked() is using 32bit arithmetics on 16bits vars, via TSN_lte() macros, which is weird and confusing. Once the offset to ctsn is calculated, all wrapping is already handled and thus to verify the Gap Ack blocks we can just use pure less/big-or-equal than checks. Also, rename gap variable to tsn_offset, so it's more meaningful, as it doesn't point to any gap at all. Even so, I don't think this discrepancy resulted in any practical bug. This patch is a preparation for the next one, which will introduce typecheck() for TSN_lte() macros and would cause a compile error here. Suggested-by: David Laight <David.Laight@ACULAB.COM> Reported-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net_sched: check NULL on error path in route4_change()WANG Cong
On error path in route4_change(), 'f' could be NULL, so we should check NULL before calling tcf_exts_destroy(). Fixes: b9a24bb76bf6 ("net_sched: properly handle failure case of tcf_exts_init()") Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-09-23ixgbe: reset before SRIOV init to avoid mailbox issuesEmil Tantilov
Enabling SRIOV while the ixgbevf driver is loaded will result in all mailbox requests from ixgbevf_open() being rejected by ixgbe because adapter->clear_to_send is set to false on reset. Call ixgbe_sriov_reinit() before pci_enable_sriov() to make sure that mailbox requests are handled from the time ixgbevf is loaded. Reported-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-23ixgbe: Support 4 queue RSS on VFs with 1 or 2 queue RSS on PFAlexander Duyck
Instead of limiting the VFs if we don't use 4 queues for RSS in the PF we can instead just limit the RSS queues used to a power of 2. By doing this we can support use cases where VFs are using more queues than the PF is currently using and can support RSS if so desired. The only limitation on this is that we cannot support 3 queues of RSS in the PF or VF. In either of these cases we should fall back to 2 queues in order to be able to use the power of 2 masking provided by the psrtype register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-23ixgbe: Limit reporting of redirection table if SR-IOV is enabledAlexander Duyck
The hardware redirection table can support more queues then the PF currently has when SR-IOV is enabled. In order to account for this use the RSS mask to trim of the bits that are not used. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-23ixgbe: Allow setting multiple queues when SR-IOV is enabledAlexander Duyck
The maximum queue count reported was 1, however support for multiple queues with SR-IOV was added some time ago so we should report support for it to the user so that they can select multiple queues if they so desire. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-23ixgbe: Use MDIO_PRTAD_NONE consistentlyMark Rustad
The value MDIO_PRTAD_NONE should be used to indicate no PHY address. Not 0, not 0xFFFF. Use the MDIO_PRTAD_NONE value consistently. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-23ixgbevf: add spinlocks for MTU change callsEmil Tantilov
Protect set_rlpml with mailbox lock to make sure the MTU configuration is handled properly. This change resolves an issue where set_rlpml can fail when the VF interface is brought up: ixgbevf 0000:03:1d.6: Failed to set MTU at 1500 Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-23ixgbe: Indicate support for pause frames in all casesMark Rustad
All the MACs supported by ixgbe support pause frames, so indicate that support in ethtool. Also set advertising according to requested mode. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-23ixgbe: Resolve NULL reference by setting {read, write}_reg_mdiMark Rustad
Set the read_reg_mdi and write_reg_mdi method pointers for X550EM_A_10G_T devices to resolve jumping to NULL. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-23ixgbe: make ixgbe_led_on/off_t_x550em staticEmil Tantilov
These functions are only used in ixgbe_x550.c. Fixes a warning when compiling with -Wmissing-prototypes Reported-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-23ixgbe: simplify the logic for setting VLAN filteringEmil Tantilov
Simplify the logic for setting VLNCTRL.VFE by checking the VMDQ flag and 82598 MAC instead of having to maintain a list of MAC types. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40evf: remove unnecessary error checking against i40e_shutdown_adminqLihong Yang
The i40e_shutdown_adminq function never returns failure. There is no need to check the non-0 return value. Clean up the unnecessary error checking and warning against it. Change-ID: Ibb616f09cfb93bd1a872ebf3241a15fb8354b31b Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40e: Limit TX descriptor count in cases where frag size is greater than 16KAlexander Duyck
The i40e driver was incorrectly assuming that we would always be pulling no more than 1 descriptor from each fragment. It is in fact possible for us to end up with the case where 2 descriptors worth of data may be pulled when a frame is larger than one of the pieces generated when aligning the payload to either 4K or pieces smaller than 16K. To adjust for this we just need to make certain to test all the way to the end of the fragments as it is possible for us to span 2 descriptors in the block before us so we need to guarantee that even the last 6 descriptors have enough data to fill a full frame. Change-ID: Ic2ecb4d6b745f447d334e66c14002152f50e2f99 Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40evf: remove unnecessary error checking against i40evf_up_completeBimmy Pujari
Function i40evf_up_complete() always returns success. Changed this to a void type and removed the code that checks the return status and prints an error message. Change-ID: I8c400f174786b9c855f679e470f35af292fb50ad Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40evf: Fix link state event handlingSridhar Samudrala
Currently disabling the link state from PF via ip link set enp5s0f0 vf 0 state disable doesn't disable the CARRIER on the VF. This patch updates the carrier and starts/stops the tx queues based on the link state notification from PF. PF: enp5s0f0, VF: enp5s2 #modprobe i40e #echo 2 > /sys/class/net/enp5s0f0/device/sriov_numvfs #ip link set enp5s2 up #ip -d link show enp5s2 175: enp5s2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether ea:4d:60:bc:6f:85 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 #ip link set enp5s0f0 vf 0 state disable #ip -d link show enp5s0f0 171: enp5s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 68:05:ca:2e:72:68 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 numtxqueues 72 numrxqueues 72 portid 6805ca2e7268 vf 0 MAC 00:00:00:00:00:00, spoof checking on, link-state disable, trust off vf 1 MAC 00:00:00:00:00:00, spoof checking on, link-state auto, trust off #ip -d link show enp5s2 175: enp5s2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 link/ether ea:4d:60:bc:6f:85 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 numtxqueues 16 numrxqueues 16 Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40e: avoid potential null pointer dereference when assigning lenColin Ian King
There is a sanitcy check for desc being null in the first line of function i40evf_debug_aq. However, before that, aq_desc is cast from desc, and aq_desc is being dereferenced on the assignment of len, so this could be a potential null pointer deference. Fix this by moving the initialization of len to the code block where len is being used and hence at this point we know it is OK to dereference aq_desc. Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40e: Fix for extra byte swap in tunnel setupCarolyn Wyborny
This patch fixes an issue where we were byte swapping the port parameter, then byte swapping it again in function execution. Obviously, that's unnecessary, so take it out of the function calls. Without this patch, the udp based tunnel configuration would not be correct. Change-ID: I788d83c5bd5732170f1a81dbfa0b1ac3ca8ea5b7 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40e: Fix to check for NULLCarolyn Wyborny
This patch fixes an issue in the virt channel code, where a return from i40e_find_vsi_from_id was not checked for NULL when applicable. Without this patch, there is a risk for panic and static analysis tools complain. This patch fixes the problem by adding the check and adding an additional input check for similar reasons. Change-ID: I7e9be88eb7a3addb50eadc451c8336d9e06f5394 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40e: return correct opcode to VFMitch Williams
This conditional is backward, so the driver responds back to the VF with the wrong opcode. Do the old switcheroo to fix this. Change-ID: I384035b0fef8a3881c176de4b4672009b3400b25 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40e: fix "dump port" command when NPAR enabledAlan Brady
When using the debugfs to issue the "dump port" command with NPAR enabled, the firmware reports back with invalid argument. The issue occurs because the pf->mac_seid was used to perform the query. This is fine when NPAR is disabled because the switch ID == pf->mac_seid, however this is not the case when NPAR is enabled. This fix instead goes through the VSI to determine the correct ID to use in either case. Change-ID: I0cd67913a7f2c4a2962e06d39e32e7447cc55b6a Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40e: fix setting user defined RSS hash keyAlan Brady
Previously, when using ethtool to change the RSS hash key, ethtool would report back saying the old key was still being used and no error was reported. It was unclear whether it was being reported incorrectly or being set incorrectly. Debugging revealed 'i40e_set_rxfh()' returned zero immediately instead of setting the key because a user defined indirection table is not supplied when changing the hash key. This fix instead changes it such that if an indirection table is not supplied, then a default one is created and the hash key is now correctly set. Change-ID: Iddb621897ecf208650272b7ee46702cad7b69a71 Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22Merge tag 'media/v4.8-7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - several fixes for new drivers added for Kernel 4.8 addition (cec core, pulse8 cec driver and Mediatek vcodec) - a regression fix for cx23885 and saa7134 drivers - an important fix for rcar-fcp, making rcar_fcp_enable() return 0 on success * tag 'media/v4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (25 commits) [media] cx23885/saa7134: assign q->dev to the PCI device [media] rcar-fcp: Make sure rcar_fcp_enable() returns 0 on success [media] cec: fix ioctl return code when not registered [media] cec: don't Feature Abort broadcast msgs when unregistered [media] vcodec:mediatek: Refine VP8 encoder driver [media] vcodec:mediatek: Refine H264 encoder driver [media] vcodec:mediatek: change H264 profile default to profile high [media] vcodec:mediatek: Add timestamp and timecode copy for V4L2 Encoder [media] vcodec:mediatek: Fix visible_height larger than coded_height issue in s_fmt_out [media] vcodec:mediatek: Fix fops_vcodec_release flow for V4L2 Encoder [media] vcodec:mediatek:code refine for v4l2 Encoder driver [media] cec-funcs.h: add missing vendor-specific messages [media] cec-edid: check for IEEE identifier [media] pulse8-cec: fix error handling [media] pulse8-cec: set correct Signal Free Time [media] mtk-vcodec: add HAS_DMA dependency [media] cec: ignore messages when log_addr_mask == 0 [media] cec: add item to TODO [media] cec: set unclaimed addresses to CEC_LOG_ADDR_INVALID [media] cec: add CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK flag ...
2016-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Mostly small bits scattered all over the place, which is usually how things go this late in the -rc series. 1) Proper driver init device resets in bnx2, from Baoquan He. 2) Fix accounting overflow in __tcp_retransmit_skb(), sk_forward_alloc, and ip_idents_reserve, from Eric Dumazet. 3) Fix crash in bna driver ethtool stats handling, from Ivan Vecera. 4) Missing check of skb_linearize() return value in mac80211, from Johannes Berg. 5) Endianness fix in nf_table_trace dumps, from Liping Zhang. 6) SSN comparison fix in SCTP, from Marcelo Ricardo Leitner. 7) Update DSA and b44 MAINTAINERS entries. 8) Make input path of vti6 driver work again, from Nicolas Dichtel. 9) Off-by-one in mlx4, from Sebastian Ott. 10) Fix fallback route lookup handling in ipv6, from Vincent Bernat. 11) Fix stack corruption on probe in qed driver, from Yuval Mintz. 12) PHY init fixes in r8152 from Hayes Wang. 13) Missing SKB free in irda_accept error path, from Phil Turnbull" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) tcp: properly account Fast Open SYN-ACK retrans tcp: fix under-accounting retransmit SNMP counters MAINTAINERS: Update b44 maintainer. net: get rid of an signed integer overflow in ip_idents_reserve() net/mlx4_core: Fix to clean devlink resources net: can: ifi: Configure transmitter delay vti6: fix input path ipmr, ip6mr: return lastuse relative to now r8152: disable ALDPS and EEE before setting PHY r8152: remove r8153_enable_eee r8152: move PHY settings to hw_phy_cfg r8152: move enabling PHY r8152: move some functions cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapter qed: Fix stack corruption on probe MAINTAINERS: Add an entry for the core network DSA code net: ipv6: fallback to full lookup if table lookup is unsuitable net/mlx5: E-Switch, Handle mode change failures net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init code net/mlx5: Fix flow counter bulk command out mailbox allocation ...
2016-09-22xen-netback: switch to threaded irq for control ringJuergen Gross
Instead of open coding it use the threaded irq mechanism in xen-netback. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net: ethernet: mediatek: get out of potential invalid pointer accessSean Wang
Potential dangerous invalid pointer might be accessed if the error happens when couple phy_device to net_device so cleanup the error path. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net: ethernet: mediatek: use [get|set]_link_ksettingsSean Wang
1) use new api [get|set]_link_ksettings instead of [get|set]_settings old ones. 2) dev->phydev is sure being ready before calling these callbacks, so removing all the sanity check if it is existing. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net: ethernet: mediatek: remove superfluous local variable for phy addressSean Wang
remove the unused variable for parsing PHY address and the related logic for sanity test which would be all already handled done when of_mdiobus_register was called Reported-by: Nelson Chang <nelson.chang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 09:46:34 +0000