summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-22ice: Advertise virtchnl UDP segmentation offload capabilityBrett Creeley
As the hardware is capable of supporting UDP segmentation offload, add a capability bit to virtchnl.h to communicate this and have the driver advertise its support. Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-22ice: Allow ignoring opcodes on specific VFMichal Swiatkowski
Declare bitmap of allowed commands on VF. Initialize default opcodes list that should be always supported. Declare array of supported opcodes for each caps used in virtchnl code. Change allowed bitmap by setting or clearing corresponding bit to allowlist (bit set) or denylist (bit clear). Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-22ice: warn about potentially malicious VFsVignesh Sridhar
Attempt to detect malicious VFs and, if suspected, log the information but keep going to allow the user to take any desired actions. Potentially malicious VFs are identified by checking if the VFs are transmitting too many messages via the PF-VF mailbox which could cause an overflow of this channel resulting in denial of service. This is done by creating a snapshot or static capture of the mailbox buffer which can be traversed and in which the messages sent by VFs are tracked. Co-developed-by: Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com> Signed-off-by: Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com> Co-developed-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Co-developed-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-22Merge tag 'mt76-for-kvalo-2021-04-21' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 5.13 * testmode improvements * bugfixes * device tree power limits support for 7615 and newer * hardware recovery fixes * mt7663 reset/init fixes * mt7915 flash pre-calibration support * mt7921/mt7663 runtime power management fixes # gpg: Signature made Wed 21 Apr 2021 09:58:49 PM EEST using DSA key ID 02A76EF5 # gpg: Good signature from "Felix Fietkau <nbd@nbd.name>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
2021-04-22brcmfmac: Avoid GFP_ATOMIC when GFP_KERNEL is enoughChristophe JAILLET
A workqueue is not atomic, so constraints can be relaxed here. GFP_KERNEL can be used instead of GFP_ATOMIC. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/b6e619415db4ee5de95389280d7195bb56e45f77.1618860716.git.christophe.jaillet@wanadoo.fr
2021-04-22qtnfmac: Fix possible buffer overflow in qtnf_event_handle_external_authLee Gibson
Function qtnf_event_handle_external_auth calls memcpy without checking the length. A user could control that length and trigger a buffer overflow. Fix by checking the length is within the maximum allowed size. Signed-off-by: Lee Gibson <leegib@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210419145842.345787-1-leegib@gmail.com
2021-04-22wlcore: Fix buffer overrun by snprintf due to incorrect buffer sizeColin Ian King
The size of the buffer than can be written to is currently incorrect, it is always the size of the entire buffer even though the snprintf is writing as position pos into the buffer. Fix this by setting the buffer size to be the number of bytes left in the buffer, namely sizeof(buf) - pos. Addresses-Coverity: ("Out-of-bounds access") Fixes: 7b0e2c4f6be3 ("wlcore: fix overlapping snprintf arguments in debugfs") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210419141405.180582-1-colin.king@canonical.com
2021-04-22wl3501_cs: Fix out-of-bounds warnings in wl3501_mgmt_joinGustavo A. R. Silva
Fix the following out-of-bounds warnings by adding a new structure wl3501_req instead of duplicating the same members in structure wl3501_join_req and wl3501_scan_confirm: arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [39, 108] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 36 [-Warray-bounds] arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [25, 95] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 22 [-Warray-bounds] Refactor the code, accordingly: $ pahole -C wl3501_req drivers/net/wireless/wl3501_cs.o struct wl3501_req { u16 beacon_period; /* 0 2 */ u16 dtim_period; /* 2 2 */ u16 cap_info; /* 4 2 */ u8 bss_type; /* 6 1 */ u8 bssid[6]; /* 7 6 */ struct iw_mgmt_essid_pset ssid; /* 13 34 */ struct iw_mgmt_ds_pset ds_pset; /* 47 3 */ struct iw_mgmt_cf_pset cf_pset; /* 50 8 */ struct iw_mgmt_ibss_pset ibss_pset; /* 58 4 */ struct iw_mgmt_data_rset bss_basic_rset; /* 62 10 */ /* size: 72, cachelines: 2, members: 10 */ /* last cacheline: 8 bytes */ }; $ pahole -C wl3501_join_req drivers/net/wireless/wl3501_cs.o struct wl3501_join_req { u16 next_blk; /* 0 2 */ u8 sig_id; /* 2 1 */ u8 reserved; /* 3 1 */ struct iw_mgmt_data_rset operational_rset; /* 4 10 */ u16 reserved2; /* 14 2 */ u16 timeout; /* 16 2 */ u16 probe_delay; /* 18 2 */ u8 timestamp[8]; /* 20 8 */ u8 local_time[8]; /* 28 8 */ struct wl3501_req req; /* 36 72 */ /* size: 108, cachelines: 2, members: 10 */ /* last cacheline: 44 bytes */ }; $ pahole -C wl3501_scan_confirm drivers/net/wireless/wl3501_cs.o struct wl3501_scan_confirm { u16 next_blk; /* 0 2 */ u8 sig_id; /* 2 1 */ u8 reserved; /* 3 1 */ u16 status; /* 4 2 */ char timestamp[8]; /* 6 8 */ char localtime[8]; /* 14 8 */ struct wl3501_req req; /* 22 72 */ /* --- cacheline 1 boundary (64 bytes) was 30 bytes ago --- */ u8 rssi; /* 94 1 */ /* size: 96, cachelines: 2, members: 8 */ /* padding: 1 */ /* last cacheline: 32 bytes */ }; The problem is that the original code is trying to copy data into a bunch of struct members adjacent to each other in a single call to memcpy(). Now that a new struct wl3501_req enclosing all those adjacent members is introduced, memcpy() doesn't overrun the length of &sig.beacon_period and &this->bss_set[i].beacon_period, because the address of the new struct object _req_ is used as the destination, instead. This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1fbaf516da763b50edac47d792a9145aa4482e29.1618442265.git.gustavoars@kernel.org
2021-04-22wl3501_cs: Fix out-of-bounds warnings in wl3501_send_pktGustavo A. R. Silva
Fix the following out-of-bounds warnings by enclosing structure members daddr and saddr into new struct addr, in structures wl3501_md_req and wl3501_md_ind: arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds] arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds] Refactor the code, accordingly: $ pahole -C wl3501_md_req drivers/net/wireless/wl3501_cs.o struct wl3501_md_req { u16 next_blk; /* 0 2 */ u8 sig_id; /* 2 1 */ u8 routing; /* 3 1 */ u16 data; /* 4 2 */ u16 size; /* 6 2 */ u8 pri; /* 8 1 */ u8 service_class; /* 9 1 */ struct { u8 daddr[6]; /* 10 6 */ u8 saddr[6]; /* 16 6 */ } addr; /* 10 12 */ /* size: 22, cachelines: 1, members: 8 */ /* last cacheline: 22 bytes */ }; $ pahole -C wl3501_md_ind drivers/net/wireless/wl3501_cs.o struct wl3501_md_ind { u16 next_blk; /* 0 2 */ u8 sig_id; /* 2 1 */ u8 routing; /* 3 1 */ u16 data; /* 4 2 */ u16 size; /* 6 2 */ u8 reception; /* 8 1 */ u8 pri; /* 9 1 */ u8 service_class; /* 10 1 */ struct { u8 daddr[6]; /* 11 6 */ u8 saddr[6]; /* 17 6 */ } addr; /* 11 12 */ /* size: 24, cachelines: 1, members: 9 */ /* padding: 1 */ /* last cacheline: 24 bytes */ }; The problem is that the original code is trying to copy data into a couple of arrays adjacent to each other in a single call to memcpy(). Now that a new struct _addr_ enclosing those two adjacent arrays is introduced, memcpy() doesn't overrun the length of &sig.daddr[0] and &sig.daddr, because the address of the new struct object _addr_ is used, instead. This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/d260fe56aed7112bff2be5b4d152d03ad7b78e78.1618442265.git.gustavoars@kernel.org
2021-04-22ath11k: fix warning in ath11k_mhi_configAnilkumar Kolli
Initialize static variable ath11k_mhi_config for all hw_rev, return error for unknown hw_rev. This patch fixes below Smatch warning: drivers/net/wireless/ath/ath11k/mhi.c:357 ath11k_mhi_register() error: uninitialized symbol 'ath11k_mhi_config'. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 Fixes: a233811ef600 ("ath11k: Add qcn9074 mhi controller config") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1617857830-19315-1-git-send-email-akolli@codeaurora.org
2021-04-22ath11k: qmi: Fix spelling mistake "requeqst" -> "request"Colin Ian King
There is a spelling mistake in an ath11k_warn message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210316091924.15627-1-colin.king@canonical.com
2021-04-22ath10k: Fix ath10k_wmi_tlv_op_pull_peer_stats_info() unlock without lockShuah Khan
ath10k_wmi_tlv_op_pull_peer_stats_info() could try to unlock RCU lock winthout locking it first when peer reason doesn't match the valid cases for this function. Add a default case to return without unlocking. Fixes: 09078368d516 ("ath10k: hold RCU lock when calling ieee80211_find_sta_by_ifaddr()") Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210406230228.31301-1-skhan@linuxfoundation.org
2021-04-22ath10k: Fix a use after free in ath10k_htc_send_bundleLv Yunlong
In ath10k_htc_send_bundle, the bundle_skb could be freed by dev_kfree_skb_any(bundle_skb). But the bundle_skb is used later by bundle_skb->len. As skb_len = bundle_skb->len, my patch replaces bundle_skb->len to skb_len after the bundle_skb was freed. Fixes: c8334512f3dd1 ("ath10k: add htt TX bundle for sdio") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210329120154.8963-1-lyl2019@mail.ustc.edu.cn
2021-04-22ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devicesToke Høiland-Jørgensen
When the error check in ath9k_hw_read_revisions() was added, it checked for -EIO which is what ath9k_regread() in the ath9k_htc driver uses. However, for plain ath9k, the register read function uses ioread32(), which just returns -1 on error. So if such a read fails, it still gets passed through and ends up as a weird mac revision in the log output. Fix this by changing ath9k_regread() to return -1 on error like ioread32() does, and fix the error check to look for that instead of -EIO. Fixes: 2f90c7e5d094 ("ath9k: Check for errors when reading SREV register") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210326180819.142480-1-toke@redhat.com
2021-04-21net: phy: marvell: don't use empty switch default caseMarek Behún
This causes error reported by kernel test robot. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: 41d26bf4aba0 ("net: phy: marvell: refactor HWMON OOP style") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21net: bridge: fix error in br_multicast_add_port when CONFIG_NET_SWITCHDEV=nVladimir Oltean
When CONFIG_NET_SWITCHDEV is disabled, the shim for switchdev_port_attr_set inside br_mc_disabled_update returns -EOPNOTSUPP. This is not caught, and propagated to the caller of br_multicast_add_port, preventing ports from joining the bridge. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: ae1ea84b33da ("net: bridge: propagate error code and extack from br_mc_disabled_update") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21mt76: mt7921: reinit wpdma during drv_own if necessaryLorenzo Bianconi
Check dummy reg to reinitialized WPDMA during driver_own operation Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: move mt76_token_init in mt76_alloc_deviceLorenzo Bianconi
In order to remove duplicated code, move mt76_token_init in mt76_alloc_device routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: fix a precision vs width bug in printkDan Carpenter
Precision %.*s was intended instead of width %*s. The original code is potentially an information leak. Fixes: c7cc5ec57303 ("mt76: mt7921: rework mt7921_mcu_debug_msg_event routine") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: fix a precision vs width bug in printkDan Carpenter
Precision %.*s was intended instead of width %*s. The original code will still print unintended data from beyond the end of skb->data. Fixes: 665b2c780d63 ("mt76: mt7915: limit firmware log message printk to buffer length") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: fix a precision vs width bug in printkDan Carpenter
Precision "%.*s" was intended instead of width "%*s". The original code will print garbage from beyond the end of the skb->data. Fixes: d76d6c3ba2b0 ("mt76: mt7615: limit firmware log message printk to buffer length") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: debugfs: introduce napi_threaded nodeLorenzo Bianconi
Introduce napi_threaded debugfs knob in order to enable/disable NAPI threaded support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: introduce mt7921_mcu_sta_add routineLorenzo Bianconi
mt7921_mcu_sta_add will be used to add and remove wtbl entries. Create broadcast wtbl entry after AP association Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: mt7921_stop should put device in fw_own stateSean Wang
mt7921_stop should put device in fw_own state to reduce power consumption. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: unschedule mac_work before going to sleepLorenzo Bianconi
In order to wake the device less frequently and so reduce power consumpation, unschedule mac_work before going to sleep Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7663: add awake and doze time accountingLorenzo Bianconi
Similar to mt7921, introduce awake and doze time accounting for runtime pm. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: improve doze opportunityLorenzo Bianconi
Increase mt7921 mac work timeout in oder to have move sleep opportunities Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: get rid of mcu_reset function pointerLorenzo Bianconi
since mcu_reset it used only by mt7921, move the reset callback to mt7921_mcu_parse_response routine and get rid of the function pointer. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: do not read rf value from efuse in flash modeShayne Chen
Do not read rf value from efuse when driver is configured to use flash mode. Tested-by: Bruce Chuang <bruce-ss.chuang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: move token utilities in mt76 common moduleLorenzo Bianconi
Move token management in mt76 common module since it is shared between mt7615, mt7915 and mt7921 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: move token_lock, token and token_count in mt76_devLorenzo Bianconi
Move token_lock, token and token_count data structures in mt76_dev. This is a preliminary patch to move token management in mt76 common module since it is shared by mt7615, mt7915 and mt7921 drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: fix possible invalid register accessSean Wang
Disable the interrupt and synchronze for the pending irq handlers to ensure the irq tasklet is not being scheduled after the suspend to avoid the possible invalid register access acts when the host pcie controller is suspended. [17932.910534] mt7921e 0000:01:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 21375 usecs [17932.910590] pcieport 0000:00:00.0: calling pci_pm_suspend+0x0/0x22c @ 18565, parent: pci0000:00 [17932.910602] pcieport 0000:00:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 8 usecs [17932.910671] mtk-pcie 11230000.pcie: calling platform_pm_suspend+0x0/0x60 @ 22783, parent: soc [17932.910674] mtk-pcie 11230000.pcie: platform_pm_suspend+0x0/0x60 returned 0 after 0 usecs ... 17933.615352] x1 : 00000000000d4200 x0 : ffffff8269ca2300 [17933.620666] Call trace: [17933.623127] mt76_mmio_rr+0x28/0xf0 [mt76] [17933.627234] mt7921_rr+0x38/0x44 [mt7921e] [17933.631339] mt7921_irq_tasklet+0x54/0x1d8 [mt7921e] [17933.636309] tasklet_action_common+0x12c/0x16c [17933.640754] tasklet_action+0x24/0x2c [17933.644418] __do_softirq+0x16c/0x344 [17933.648082] irq_exit+0xa8/0xac [17933.651224] scheduler_ipi+0xd4/0x148 [17933.654890] handle_IPI+0x164/0x2d4 [17933.658379] gic_handle_irq+0x140/0x178 [17933.662216] el1_irq+0xb8/0x180 [17933.665361] cpuidle_enter_state+0xf8/0x204 [17933.669544] cpuidle_enter+0x38/0x4c [17933.673122] do_idle+0x1a4/0x2a8 [17933.676352] cpu_startup_entry+0x24/0x28 [17933.680276] rest_init+0xd4/0xe0 [17933.683508] arch_call_rest_init+0x10/0x18 [17933.687606] start_kernel+0x340/0x3b4 [17933.691279] Code: aa0003f5 d503201f f953eaa8 8b344108 (b9400113) [17933.697373] ---[ end trace a24b8e26ffbda3c5 ]--- [17933.767846] Kernel panic - not syncing: Fatal exception in interrupt Fixes: ffa1bf97425b ("mt76: mt7921: introduce PM support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: enable deep sleep when the device suspendsSean Wang
Enable the deep sleep mode in suspend handler to reduce the power consumption further. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: introduce mt76_connac_mcu_set_deep_sleep utilitySean Wang
Introduce mt76_connac_mcu_set_deep_sleep to enable deep sleep mode and will be activated immediately when the host returns the ownership to the device. Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: introduce mt7921_wpdma_reinit_cond utility routineLorenzo Bianconi
Add mt7921_wpdma_reinit_cond to check dummy reg if driver needs to reinitialized WPDMA after driver_own operation Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: introduce mt7921_dma_{enable,disable} utilitiesLorenzo Bianconi
Introduce mt7921_dma_enable and mt7921_dma_disable utilities routine in order for code reusing between mt7921_dma_reset and mt7921_dma_init. This is a preliminary patch to reset dma during device driver_own request. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: introduce mt7921_wpdma_reset utility routineLorenzo Bianconi
Introduce mt7921_wpdma_reset routine to reset wpdma during chip reset or driver_own request. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: move mt7921_dma_reset in dma.cLorenzo Bianconi
Move mt7921_dma_reset routine in dma.c and make mt7921_dma_prefetch static. Moreover add force parameter to mt7921_dma_reset signature. This is a preliminary patch to reset dma mt7921_mcu_drv_pmctrl. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: Fix a dereference of pointer sta before it is null checkedColin Ian King
Currently the assignment of idx dereferences pointer sta before sta is null checked, leading to a potential null pointer dereference. Fix this by assigning idx when it is required after the null check on pointer sta. Addresses-Coverity: ("Dereference before null check") Fixes: a4a5a430b076 ("mt76: mt7615: fix TSF configuration") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: enable sw interruptsLorenzo Bianconi
Enable sw interrupts in order to wake the device from deep sleep receiving packets Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: add awake and doze time accountingLorenzo Bianconi
Introduce awake and doze time accounting for runtime pm. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: remove MT76_STATE_PM in tx pathLorenzo Bianconi
since tx/rx path is now relying pm ref counting, get rid of MT76_STATE_PM check in the tx path Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: use waitqueue for runtime-pmLorenzo Bianconi
Simplify the code using a wait_queue_head_t instead of a completion to wait the chip is fully awake in mt76_connac_pm_wake routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: do not run mt76_txq_schedule_all directlyLorenzo Bianconi
In order to not break runtime-pm, do run mt76_txq_schedule_all in mt7615_set_channel/mt7921_set_channel but rely on mt76_worker_schedule Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: rely on pm refcounting in mt7615_led_set_configLorenzo Bianconi
Rely on mt76_connac_pm_ref/mt76_connac_pm_unref utility routines in mt7615_led_set_config Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: alaways wake the device before scanningLorenzo Bianconi
move scanning check from mt76_connac_power_save_sched routine to mt7921_pm_power_save_work/mt7615_pm_power_save_work ones Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: get rid of useless MT76_STATE_PM in mt7921_mac_workLorenzo Bianconi
Remove useless MT76_STATE_PM check in mt7921_mac_work since mt7921_mutex_acquire will wake up the device if necessary Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: remove MT76_STATE_PM in mac_tx_freeLorenzo Bianconi
Get rid of MT76_STATE_PM chec in mt7615_mac_tx_free and mt7921_mac_tx_free since we already rely on mt76_connac_pm_unref in the NAPI callback. Remove mt76_connac_power_save_sched calls in mt7615_mac_tx_free and mt7921_mac_tx_free Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: check wake refcount in mcu_fw_pmctrlLorenzo Bianconi
In order to avoid synchronization races between tx and rx path, rely on mt76_connac_skip_fw_pmctrl putting the chip in sleep mode for mt7921 and mt7663 devices Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: unschedule ps_work in mt76_connac_pm_wakeLorenzo Bianconi
In order to avoid synchronization issues between wake and ps works, cancel ps_work in mt76_connac_pm_wake routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 07:30:17 +0000