| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Thomas Gleixner:
- Move the smp_processor_id() invocation back into the non-preemtible
region, so that the result is valid to use
- Add the missing package C2 residency counters for Sierra Forest CPUs
to make the newly added support actually useful
* tag 'perf-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix smp_processor_id()-in-preemptible warnings
perf/x86/intel/cstate: Add pkg C2 residency counter for Sierra Forest
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A couple of fixes for interrupt chip drivers:
- Make sure to skip the clear register space in the MBIGEN driver
when calculating the node register index. Otherwise the clear
register is clobbered and the wrong node registers are accessed.
- Fix a signed/unsigned confusion in the loongarch CPU driver which
converts an error code to a huge "valid" interrupt number.
- Convert the mesion GPIO interrupt controller lock to a raw spinlock
so it works on RT.
- Add a missing static to a internal function in the pic32 EVIC
driver"
* tag 'irq-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mbigen: Fix mbigen node address layout
irqchip/meson-gpio: Convert meson_gpio_irq_controller::lock to 'raw_spinlock_t'
irqchip/irq-pic32-evic: Add missing 'static' to internal function
irqchip/loongarch-cpu: Fix return value of lpic_gsi_to_irq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two fixes for locking and jump labels:
- Ensure that the atomic_cmpxchg() conditions are correct and
evaluating to true on any non-zero value except 1. The missing
check of the return value leads to inconsisted state of the jump
label counter.
- Add a missing type conversion in the paravirt spinlock code which
makes loongson build again"
* tag 'locking-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_label: Fix the fix, brown paper bags galore
locking/pvqspinlock: Correct the type of "old" variable in pv_kick_node()
|
|
Commit 04f08ef291d4 ("arm/arm64: dts: arm: Use generic clock and
regulator nodenames") renamed nodes and created 2 "clock-24000000" nodes
(at different paths).
The kernel can't handle these duplicate names even though they are at
different paths. Fix this by renaming one of the nodes to "clock-pclk".
This name is aligned with other Arm boards (those didn't have a known
frequency to use in the node name).
Fixes: 04f08ef291d4 ("arm/arm64: dts: arm: Use generic clock and regulator nodenames")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull smb client fixes from Steve French:
- two reparse point fixes
- minor cleanup
- additional trace point (to help debug a recent problem)
* tag '6.11-rc1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
smb: client: fix FSCTL_GET_REPARSE_POINT against NetApp
smb3: add dynamic tracepoints for shutdown ioctl
cifs: Remove cifs_aio_ctx
smb: client: handle lack of FSCTL_GET_REPARSE_POINT support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- two Kconfig fixes
- one fix for the UVC driver addressing probing time detection of a UVC
custom controls
- one fix related to PDF generation
* tag 'media/v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: v4l: Fix missing tabular column hint for Y14P format
media: intel/ipu6: select AUXILIARY_BUS in Kconfig
media: ipu-bridge: fix ipu6 Kconfig dependencies
media: uvcvideo: Fix custom control mapping probing
|
|
Lorenzo Bianconi says:
====================
Add second QDMA support for EN7581 eth controller
EN7581 SoC supports two independent QDMA controllers to connect the
Ethernet Frame Engine (FE) to the CPU. Introduce support for the second
QDMA controller. This is a preliminary series to support multiple FE ports
(e.g. connected to a second PHY controller).
Changes since v1:
- squash patch 6/9 and 7/9
- move some duplicated code from patch 2/9 in 1/9
- cosmetics
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce support for the DSA built-in switch available on the EN7581
development board. EN7581 support is similar to MT7988 one except
it requires to set MT7530_FORCE_MODE bit in MT753X_PMCR_P register
for on cpu port.
Tested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add documentation for the built-in switch which can be found in the
Airoha EN7581 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The lifetime of TCP-AO static_key is the same as the last
tcp_ao_info. On the socket destruction tcp_ao_info ceases to be
with RCU grace period, while tcp-ao static branch is currently deferred
destructed. The static key definition is
: DEFINE_STATIC_KEY_DEFERRED_FALSE(tcp_ao_needed, HZ);
which means that if RCU grace period is delayed by more than a second
and tcp_ao_needed is in the process of disablement, other CPUs may
yet see tcp_ao_info which atent dead, but soon-to-be.
And that breaks the assumption of static_key_fast_inc_not_disabled().
See the comment near the definition:
> * The caller must make sure that the static key can't get disabled while
> * in this function. It doesn't patch jump labels, only adds a user to
> * an already enabled static key.
Originally it was introduced in commit eb8c507296f6 ("jump_label:
Prevent key->enabled int overflow"), which is needed for the atomic
contexts, one of which would be the creation of a full socket from a
request socket. In that atomic context, it's known by the presence
of the key (md5/ao) that the static branch is already enabled.
So, the ref counter for that static branch is just incremented
instead of holding the proper mutex.
static_key_fast_inc_not_disabled() is just a helper for such usage
case. But it must not be used if the static branch could get disabled
in parallel as it's not protected by jump_label_mutex and as a result,
races with jump_label_update() implementation details.
Happened on netdev test-bot[1], so not a theoretical issue:
[] jump_label: Fatal kernel bug, unexpected op at tcp_inbound_hash+0x1a7/0x870 [ffffffffa8c4e9b7] (eb 50 0f 1f 44 != 66 90 0f 1f 00)) size:2 type:1
[] ------------[ cut here ]------------
[] kernel BUG at arch/x86/kernel/jump_label.c:73!
[] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
[] CPU: 3 PID: 243 Comm: kworker/3:3 Not tainted 6.10.0-virtme #1
[] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[] Workqueue: events jump_label_update_timeout
[] RIP: 0010:__jump_label_patch+0x2f6/0x350
...
[] Call Trace:
[] <TASK>
[] arch_jump_label_transform_queue+0x6c/0x110
[] __jump_label_update+0xef/0x350
[] __static_key_slow_dec_cpuslocked.part.0+0x3c/0x60
[] jump_label_update_timeout+0x2c/0x40
[] process_one_work+0xe3b/0x1670
[] worker_thread+0x587/0xce0
[] kthread+0x28a/0x350
[] ret_from_fork+0x31/0x70
[] ret_from_fork_asm+0x1a/0x30
[] </TASK>
[] Modules linked in: veth
[] ---[ end trace 0000000000000000 ]---
[] RIP: 0010:__jump_label_patch+0x2f6/0x350
[1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao-dbg/results/696681/5-connect-deny-ipv6/stderr
Cc: stable@kernel.org
Fixes: 67fa83f7c86a ("net/tcp: Add static_key for TCP-AO")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One core change that reverts the double message print patch in sd.c
(it was causing regressions on embedded systems).
The rest are driver fixes in ufs, mpt3sas and mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: exynos: Don't resume FMP when crypto support is disabled
scsi: mpt3sas: Avoid IOMMU page faults on REPORT ZONES
scsi: mpi3mr: Avoid IOMMU page faults on REPORT ZONES
scsi: ufs: core: Do not set link to OFF state while waking up from hibernation
scsi: Revert "scsi: sd: Do not repeat the starting disk message"
scsi: ufs: core: Fix deadlock during RTC update
scsi: ufs: core: Bypass quick recovery if force reset is needed
scsi: ufs: core: Check LSDBS cap when !mcq
|
|
Kuniyuki Iwashima says:
====================
net: Random cleanup for netns initialisation.
patch 1 & 2 suppress unwanted memory allocation for net->gen->ptr[].
patch 3 ~ 6 move part of netns initialisation to prenet_init() that
do not require pernet_ops_rwsem.
v2:
patch 1 : Removed Fixes: tag
patch 2 : Use XOR for WARN_ON()
v1: https://lore.kernel.org/netdev/20240729210801.16196-1-kuniyu@amazon.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 7c3f1875c66f ("net: move somaxconn init from sysctl code")
introduced net_defaults_ops to make sure that net.core sysctl knobs
are always initialised even if CONFIG_SYSCTL is disabled.
Such operations better fit preinit_net() added for a similar purpose
by commit 6e77a5a4af05 ("net: initialize net->notrefcnt_tracker earlier").
Let's initialise the sysctl defaults in preinit_net().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most initialisations in setup_net() do not require pernet_ops_rwsem
and can be moved to preinit_net().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When initialising the root netns, we call preinit_net() under
pernet_ops_rwsem.
However, the operations in preinit_net() do not require pernet_ops_rwsem.
Also, we don't hold it for preinit_net() when initialising non-root netns.
To be consistent, let's call preinit_net() without pernet_ops_rwsem in
net_ns_init().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When initialising the root netns, we set net->passive in setup_net().
However, we do it twice for non-root netns in copy_net_ns() and
setup_net().
This is because we could bypass setup_net() in copy_net_ns() if
down_read_killable() fails.
preinit_net() is a better place to put such an operation.
Let's initialise net->passive in preinit_net().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can allocate per-netns memory for struct pernet_operations by specifying
id and size.
register_pernet_operations() assigns an id to pernet_operations and later
ops_init() allocates the specified size of memory as net->gen->ptr[id].
If id is missing, no memory is allocated. If size is not specified,
pernet_operations just wastes an entry of net->gen->ptr[] for every netns.
net_generic is available only when both id and size are specified, so let's
ensure that.
While we are at it, we add const to both fields.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and
ppp parts") converted net->gen->ptr[pppol2tp_net_id] in l2tp_ppp.c to
net->gen->ptr[l2tp_net_id] in l2tp_core.c.
Now the leftover wastes one entry of net->gen->ptr[] in each netns.
Let's avoid the unwanted allocation.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull xfs fixes from Chandan Babu:
- Fix memory leak when corruption is detected during scrubbing parent
pointers
- Allow SECURE namespace xattrs to use reserved block pool to in order
to prevent ENOSPC
- Save stack space by passing tracepoint's char array to file_path()
instead of another stack variable
- Remove unused parameter in macro XFS_DQUOT_LOGRES
- Replace comma with semicolon in a couple of places
* tag 'xfs-6.11-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: convert comma to semicolon
xfs: convert comma to semicolon
xfs: remove unused parameter in macro XFS_DQUOT_LOGRES
xfs: fix file_path handling in tracepoints
xfs: allow SECURE namespace xattrs to use reserved block pool
xfs: fix a memory leak
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- fix unaligned memory accesses when calling BPF functions
- adjust memory size constants to fix possible DMA corruptions
* tag 'parisc-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: fix a possible DMA corruption
parisc: fix unaligned accesses in BPF
|
|
The runtime constants linker script depended on documented linker
behavior [1]:
"If an output section’s name is the same as the input section’s name
and is representable as a C identifier, then the linker will
automatically PROVIDE two symbols: __start_SECNAME and __stop_SECNAME,
where SECNAME is the name of the section. These indicate the start
address and end address of the output section respectively"
to just automatically define the symbol names for the bounds of the
runtime constant arrays.
It turns out that this isn't actually something we can rely on, with old
linkers not generating these automatic symbols. It looks to have been
introduced in binutils-2.29 back in 2017, and we still support building
with versions all the way back to binutils-2.25 (from 2015).
And yes, Oleg actually seems to be using such ancient versions of
binutils.
So instead of depending on the implicit symbols from "section names
match and are representable C identifiers", just do this all manually.
It's not like it causes us any extra pain, we already have to do that
for all the other sections that we use that often have special
characters in them.
Reported-and-tested-by: Oleg Nesterov <oleg@redhat.com>
Link: https://sourceware.org/binutils/docs/ld/Input-Section-Example.html [1]
Link: https://lore.kernel.org/all/20240802114518.GA20924@redhat.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The DEVID register contains two pieces of information: the device ID in
the upper nibble, and the silicon revision number in the lower nibble.
The driver should work fine with any silicon revision, so let's mask
that out in the device ID check.
Fixes: 20e6d190ffe1 ("net: pse-pd: Add TI TPS23881 PSE controller driver")
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git
uvcvideo v6.11 regression fix: fix custom control mapping probing
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
According to the datasheet, the VSC73xx family's maximum internal MDIO bus
speed is 20 MHz. It also allows disabling the preamble.
This commit sets the MDIO clock prescaler to the minimum value and
disables the preamble to speed up MDIO operations.
It doesn't affect the external bus because it's configured in a different
subblock.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240731203455.580262-1-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
commit 3cec055c5695 ("rxrpc: Don't hold a ref for connection workqueue")
left behind rxrpc_put_client_conn().
And commit 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
removed rxrpc_accept_incoming_calls() but left declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240731100815.1277894-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to '__reuseport_alloc()', annotate flexible array member
'sock' of 'struct sock_reuseport' with '__counted_by()' and use
convenient 'struct_size()' to simplify the math used in 'kzalloc()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240801142311.42837-1-dmantipov@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Smatch reports that copying media_name and if_name to name_parts may
overwrite the destination.
.../bearer.c:166 bearer_name_validate() error: strcpy() 'media_name' too large for 'name_parts->media_name' (32 vs 16)
.../bearer.c:167 bearer_name_validate() error: strcpy() 'if_name' too large for 'name_parts->if_name' (1010102 vs 16)
This does seem to be the case so guard against this possibility by using
strscpy() and failing if truncation occurs.
Introduced by commit b97bf3fd8f6a ("[TIPC] Initial merge")
Compile tested only.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240801-tipic-overrun-v2-1-c5b869d1f074@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GVE driver wrongly relies on netif_carrier_ok() to check the
interface administrative state when resources are being
allocated/deallocated for queue(s). netif_carrier_ok() needs
to be replaced with netif_running() for all such cases.
Administrative state is the result of "ip link set dev <dev>
up/down". It reflects whether the administrator wants to use
the device for traffic and the corresponding resources have
been allocated.
Fixes: 5f08cd3d6423 ("gve: Alloc before freeing when adjusting queues")
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240801205619.987396-1-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Nick Child says:
====================
ibmveth RR performance
This patchset aims to increase the ibmveth drivers small packet
request response rate.
These 2 patches address:
1. NAPI rescheduling technique
2. Driver-side processing of small packets
Testing over several netperf tcp_rr connections, we saw a
30% increase in transactions per second. No regressions
were observed in other workloads.
====================
Link: https://patch.msgid.link/20240801211215.128101-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the length of a packet is under the rx_copybreak threshold, the
buffer is copied into a new skb and sent up the stack. This allows the
dma mapped memory to be recycled back to FW.
Previously, the reuse of the DMA space was handled immediately.
This means that further packet processing has to wait until
h_add_logical_lan finishes for this packet.
Therefore, when reusing a packet, offload the hcall to the replenish
function. As a result, much of the shared logic between the recycle and
replenish functions can be removed.
This change increases TCP_RR packet rate by another 15% (370k to 430k
txns). We can see the ftrace data supports this:
PREV: ibmveth_poll = 8078553.0 us / 190999.0 hits = AVG 42.3 us
NEW: ibmveth_poll = 7632787.0 us / 224060.0 hits = AVG 34.07 us
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20240801211215.128101-3-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the ibmveth driver processes less than the budget, it must call
napi_complete_done() to release the instance. This function will
return false if the driver should avoid rearming interrupts.
Previously, the driver was ignoring the return code of
napi_complete_done(). As a result, there were unnecessary calls to
enable the veth irq.
Therefore, use the return code napi_complete_done() to determine if
irq rearm is necessary.
Additionally, in the event that new data is received immediately after
rearming interrupts, rather than just rescheduling napi, also jump
back to the poll processing loop since we are already in the poll
function (and know that we did not expense all of budget).
This slight tweak results in a 15% increase in TCP_RR transaction rate
(320k to 370k txns). We can see the ftrace data supports this:
PREV: ibmveth_poll = 8818014.0 us / 182802.0 hits = AVG 48.24
NEW: ibmveth_poll = 8082398.0 us / 191413.0 hits = AVG 42.22
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20240801211215.128101-2-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DEVID register contains two pieces of information: the device ID in
the upper nibble, and the silicon revision number in the lower nibble.
The driver should work fine with any silicon revision, so let's mask
that out in the device ID check.
Fixes: 20e6d190ffe1 ("net: pse-pd: Add TI TPS23881 PSE controller driver")
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240731154152.4020668-1-kyle.swenson@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
linkmode_andnot() simply returns the result of bitmap_andnot().
And the return type of bitmap_andnot() is bool.
So it makes sense for the return type of linkmode_andnot()
to also be bool.
I checked all call-sites and they either ignore the return
value or treat it as a bool.
Compile tested only.
Link: https://lore.kernel.org/netdev/68088998-4486-4930-90a4-96a32f08c490@lunn.ch/
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240801-linkfield-bowl-v1-1-d58f68967802@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lorenzo Bianconi says:
====================
Add second QDMA support for EN7581 eth controller
EN7581 SoC supports two independent QDMA controllers to connect the
Ethernet Frame Engine (FE) to the CPU. Introduce support for the second
QDMA controller. This is a preliminary series to support multiple FE ports
(e.g. connected to a second PHY controller).
====================
Link: https://patch.msgid.link/cover.1722522582.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Link the running gdm port to the qdma controller used to connect with
the CPU. Moreover, load all QDMA controllers available on EN7581 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/95b515df34ba4727f7ae5b14a1d0462cceec84ff.1722522582.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a preliminary patch to support multi-QDMA controllers.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/b51cf69c94d8cbc81e0a0b35587f024d01e6d9c0.1722522582.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Map MMIO regions of both qdma controllers available on EN7581 SoC.
Run airoha_hw_cleanup routine for both QDMA controllers available on
EN7581 SoC removing airoha_eth module or in airoha_probe error path.
This is a preliminary patch to support multi-QDMA controllers.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/a734ae608da14b67ae749b375d880dbbc70868ea.1722522582.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a preliminary patch to support multi-QDMA controllers.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/1e40c3cb973881c0eb3c3c247c78550da62054ab.1722522582.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
structures
Move airoha_eth pointer in airoha_qdma structure from
airoha_tx_irq_queue/airoha_queue ones. This is a preliminary patch to
introduce support for multi-QDMA controllers available on EN7581.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/074565b82fd0ceefe66e186f21133d825dbd48eb.1722522582.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
QDMA controllers have independent irq lines, so move irqmask in
airoha_qdma structure. This is a preliminary patch to support multiple
QDMA controllers.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/1c8a06e8be605278a7b2f3cd8ac06e74bf5ebf2b.1722522582.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
QDMA controllers available in EN7581 SoC have independent tx/rx hw queues
so move them in airoha_queues structure.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/795fc4797bffbf7f0a1351308aa9bf0e65b5126e.1722522582.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce airoha_qdma struct and move qdma IO register mapping in
airoha_qdma. This is a preliminary patch to enable both QDMA controllers
available on EN7581 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/7df163bdc72ee29c3d27a0cbf54522ffeeafe53c.1722522582.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in
reuseport_add_sock(). [0]
The repro first creates a listener with SO_REUSEPORT. Then, it creates
another listener on the same port and concurrently closes the first
listener.
The second listen() calls reuseport_add_sock() with the first listener as
sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently,
but the close() does clear it by reuseport_detach_sock().
The problem is SCTP does not properly synchronise reuseport_alloc(),
reuseport_add_sock(), and reuseport_detach_sock().
The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must
provide synchronisation for sockets that are classified into the same
reuseport group.
Otherwise, such sockets form multiple identical reuseport groups, and
all groups except one would be silently dead.
1. Two sockets call listen() concurrently
2. No socket in the same group found in sctp_ep_hashtable[]
3. Two sockets call reuseport_alloc() and form two reuseport groups
4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives
incoming packets
Also, the reported null-ptr-deref could occur.
TCP/UDP guarantees that would not happen by holding the hash bucket lock.
Let's apply the locking strategy to __sctp_hash_endpoint() and
__sctp_unhash_endpoint().
[0]:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350
Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14
RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012
RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385
R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0
R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__sctp_hash_endpoint net/sctp/input.c:762 [inline]
sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790
sctp_listen_start net/sctp/socket.c:8570 [inline]
sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625
__sys_listen_socket net/socket.c:1883 [inline]
__sys_listen+0x1b7/0x230 net/socket.c:1894
__do_sys_listen net/socket.c:1902 [inline]
__se_sys_listen net/socket.c:1900 [inline]
__x64_sys_listen+0x5a/0x70 net/socket.c:1900
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f24e46039b9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032
RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9
RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004
RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0
R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c
R13: 00007f24e465a5dc R14: 0020000000000001 R15: 00007ffcced5f7d8
</TASK>
Modules linked in:
Fixes: 6ba845740267 ("sctp: process sk_reuseport in sctp_get_port_local")
Reported-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e6979a5d2f10ecb700e4
Tested-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20240731234624.94055-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Build bot reports undefined references to devlink functions.
And local testing revealed undefined references to page_pool functions.
Based on a patch by Jakub Kicinski <kuba@kernel.org>
Fixes: 1a9d48892ea5 ("eth: fbnic: Allocate core device specific structures and devlink interface")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408011219.hiPmwwAs-lkp@intel.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240802-fbnic-select-v2-1-41f82a3e0178@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Print more stack frames and the failing line when check fails.
This helps when tests use helpers to do the checks.
Before:
# At ./ksft/drivers/net/hw/rss_ctx.py line 92:
# Check failed 1037698 >= 396893.0 traffic on other queues:[344612, 462380, 233020, 449174, 342298]
not ok 8 rss_ctx.test_rss_context_queue_reconfigure
After:
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 387, in test_rss_context_queue_reconfigure:
# Check| test_rss_queue_reconfigure(cfg, main_ctx=False)
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 230, in test_rss_queue_reconfigure:
# Check| _send_traffic_check(cfg, port, ctx_ref, { 'target': (0, 3),
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 92, in _send_traffic_check:
# Check| ksft_lt(sum(cnts[i] for i in params['noise']), directed / 2,
# Check failed 1045235 >= 405823.5 traffic on other queues (context 1)':[460068, 351995, 565970, 351579, 127270]
not ok 8 rss_ctx.test_rss_context_queue_reconfigure
Link: https://patch.msgid.link/20240801232317.545577-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Petr suggested to use errno.EOPNOTSUPP instead of hard-coded 95
in the new test case. Adjust existing ones to match this style.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new @ksft_disruptive decorator to mark the tests that might
be disruptive to the system. Depending on how well the previous
test works in the CI we might want to disable disruptive tests
by default and only let the developers run them manually.
KSFT framework runs disruptive tests by default. DISRUPTIVE=False
environment (or config file) can be used to disable these tests.
ksft_setup should be called by the test cases that want to use
new decorator (ksft_setup is only called via NetDrvEnv/NetDrvEpEnv for now).
In the future we can add similar decorators to, for example, avoid
running slow tests all the time. And/or have some option to run
only 'fast' tests for some sort of smoke test scenario.
$ DISRUPTIVE=False ./stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down # SKIP marked as disruptive
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:1 error:0
v3:
- parse yes and properly treat non-zero nums as true (Petr)
v2:
- convert from cli argument to env variable (Jakub)
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Verify that total device stats don't decrease after it has been turned down.
Also make sure the device doesn't crash when we access per-queue stats
when it's down (in case it tries to access some pointers that are NULL).
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
v3:
- use errno.EOPNOTSUPP (Petr)
- move qstat[0] under try (Petr)
v2:
- KTAP output formatting (Jakub)
- defer instead of try/finally (Jakub)
- disappearing stats is an error (Jakub)
- ksft_ge instead of open coding (Jakub)
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We re-define values of enum netdev_priv_flags as preprocessor
macros with the same name. I guess this was done to avoid breaking
out of tree modules which may use #ifdef X for kernel compatibility?
Commit 7aa98047df95 ("net: move net_device priv_flags out from UAPI")
which added the enum doesn't say. In any case, the flags with defines
are quite old now, and defines for new flags don't get added.
OOT drivers have to resort to code greps for compat detection, anyway.
Let's delete these defines, save LoC, help LXR link to the right place.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20240801163401.378723-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The old SysKonnect NIc's are not used or actively maintained anymore.
My sky2 NIC's are all in box in back corner of attic.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20240801162930.212299-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
