summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-07-30Staging: bcm: IPv6Protocol.c: Whitespace cleanupMatthias Beyer
Removes whitespace before semicolons and add blank line after declaration. Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30Staging: bcm: IPv6Protocol.c: Replaced member accessing with variableMatthias Beyer
Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30Staging: bcm: IPv6Procotol.c: Replaced member accessing with variableMatthias Beyer
Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30Staging: bcm: IPv6Protocol.c: Removed unnecessary if-else blocksMatthias Beyer
This patch simplifies if (a) { x = false; } else { if (b) { x = false; } } to if (a || b) { x = false; } Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30Staging: bcm: IPv6Protocol.c: Reindented switch-caseMatthias Beyer
This patch removes the unneccessary blocks inside the case statements and fixes the indentation of their content. Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: unisys: remove U8 typeBenjamin Romer
This patch switches all use of the U8 typedef to use the kernel's u8 type instead. Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: unisys: add sysfs entries for parahotplug supportBenjamin Romer
This patch adds new a new directory parahotplug to the visorchipset sysfs directory, and two new attributes, deviceenabled, and devicedisabled, into the new directory, to add s-Par parahotplug support. The parahotplug interface is used to deal with SR-IOV recovery situations on s-Par guest partitions. The command service partition will send a message to a guest when an SR-IOV device that guest is using needs to be temporarily removed. The message triggers a udev event that will cause a recovery script to run. When that script has completed its work, it will write to one of the parahotplug interfaces to send a message back to Command, indicating that the recovery action has completed. When a guest that is sharing an SR-IOV device is restarted, that guest will take down the PF driver on the device, but any guests with VFs will not know that their device needs to be reset as well. The recovery script makes it so the device will be shut down fully and then restarted after the sharing guest comes back up, and ensures that the timing is correct. Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: unisys: remove parahotplug proc entryBenjamin Romer
Remove the parahotplug proc code entirely in preparation for replacement with sysfs entries. Since visorchipset_proc_read_writeonly() is orphaned by the removal, it is removed as well. Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: vt6655: clean up the tail of function device_init_registersMalcolm Priestley
Aligning the code. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: vt6655: remove typedef enum __device_init_typeMalcolm Priestley
The value is either DEVICE_INIT_COLD or DEVICE_INIT_DXPL making no difference to code. Remove typedef and remove if statement in device_init_registers pulling the code in. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: vt6655: dead code remove undefined macro IO_MAPMalcolm Priestley
This device is always memory mapped Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: vt6655: dead code remove undefined macro FOR_LED_ON_NOTEBOOK code.Malcolm Priestley
Removing all variables associated with the code. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: vt6655: deadcode remove undefined macro THREAD code.Malcolm Priestley
Removing _RxManagementQueue, InitRxManagementQueue, MlmeThread, mlme_kill, EnQueue and DeQueue. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: vt6655: remove undefined TASK_LET codeMalcolm Priestley
Removing all code within and function MngWorkItem. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging:rtl8712:mlme_linux.c: Adds blank lines to pass checkpatch.plSantiago Torres
Added three newlines after variable declarations to pass checkpatch.pl. Signed-off by: Santiago Torres-Arias <torresariass@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: lustre: fix sparse warnings "Using plain integer as NULL pointer"Radek Dostal
fixes all sparse warnings "Using plain integer as NULL pointer" in drivers/staging/lustre drivers/staging/lustre/lnet/lnet/api-ni.c:1665:32: warning: Using plain integer as NULL pointer drivers/staging/lustre/lnet/lnet/api-ni.c:1773:35: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/fld/fld_request.c:171:17: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/llite/llite_lib.c:155:30: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/llite/lproc_llite.c:846:11: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/lov/lov_obd.c:902:48: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/lov/lov_obd.c:946:54: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/lov/lov_obd.c:2819:46: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/lov/lov_dev.c:456:66: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/mdc_request.c:2426:46: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/mdc_request.c:2569:46: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/mdc_request.c:2740:46: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:175:57: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:176:57: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:177:57: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:178:57: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:179:57: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:180:57: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:181:57: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:182:57: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:183:57: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:185:57: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:186:57: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:193:66: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:194:63: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:195:56: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:196:51: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:197:50: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:198:48: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:199:57: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:200:11: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:206:48: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mdc/lproc_mdc.c:207:11: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/mgc/mgc_request.c:199:9: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/obdclass/linux/linux-module.c:331:11: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/obdclass/obd_config.c:1164:53: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/obdclass/obd_config.c:1306:71: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/obdclass/llog_test.c:943:62: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/obdclass/llog_test.c:944:65: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/obdecho/echo_client.c:3116:46: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/osc/osc_request.c:3424:46: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/osc/osc_request.c:3548:46: warning: Using plain integer as NULL pointer drivers/staging/lustre/lustre/osc/osc_request.c:3615:46: warning: Using plain integer as NULL pointer Signed-off-by: Radek Dostal <rd@radekdostal.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30Staging: lustre: linux-module: add const modifier to file_operationsJessica Yu
Add the const modifier to the file_operations struct, since it is normally const. Signed-off-by: Jessica Yu <jyu@cowsay.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30Staging: lustre: linux-module: remove extraneous parensJessica Yu
Remove unnecessary parens from return statements, return is not a function Signed-off-by: Jessica Yu <jyu@cowsay.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30Staging: lustre: linux-module: remove unnecessary spacesJessica Yu
Remove extraneous space after open paren and before close paren. Signed-off-by: Jessica Yu <jyu@cowsay.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30Staging: lustre: linux-module: fix pointer style issueJessica Yu
Fix pointer code style (foo * bar -> foo *bar) Signed-off-by: Jessica Yu <jyu@cowsay.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: amplc_dio200: use the comedi_device 'mmio' memberH Hartley Sweeten
The amplc_dio200_common module currently uses a union in the private data to determine if the hardware uses port or memory mapped I/O. Use the new 'mmio' member in the comedi_device for the ioremap'ed base address and remove all the union code. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: ii_pci20kc: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the __iomem * base address. Since this was the only member in the private data, remove the struct and its allocation. This legacy driver is a bit strange. The base address of the board is passed to the (*attach) using by the user using the comedi_config utiltiy. This base address is currently not ioremap'ed and is simply cast to a void __iomem *. I'm not sure if this is correct. Add a comment so it will be addressed later. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: ni_labpc: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address. Only the ni_labpc_pci module does the ioremap, its also the only module that sets the 'has_mmio' member in the boardinfo. Remove this member from the boardinfo and use dev->mmio to determine if the I/O is memory mapped. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: ni_labpc: refactor labpc_8255_mmio()H Hartley Sweeten
Refactor the 8255 support code in preperation for using the comedi_device 'mmio' member. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: ni_labpc: don't pass dev->iobase to labpc_counter_set_mode()H Hartley Sweeten
Use the comedi_device parameter that is passed to this function to find the dev->iobase so it does not have to be included in each call. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: ni_labpc: don't pass dev->iobase to labpc_counter_load()H Hartley Sweeten
Use the comedi_device parameter that is passed to this function to find the dev->iobase so it does not have to be included in each call. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: ni_labpc: pass comedi_device to the I/O callbacksH Hartley Sweeten
This driver uses some callbacks in the private data to handle the port mapped or memory mapped I/O used to access the hardware. Pass the comedi_device pointer to the helper functions so that the base address can be found and does not need to be included in each call. Also, remove the inline from the helper functions. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: mite: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed 'daq_io_addr'. Move the iounmap of this address from mite_detach() to the drivers that use the mite module. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: mite: pass comedi_device to mite_setup()H Hartley Sweeten
For aesthetics, pass the comedi_device to mite_setup() and mite_setup2() so that the dev->class_dev can be used in the dev_{level} message to make the messages have consistancy with the other comedi drivers. Remove the extra dev_warn() noise in the drivers when mite_setup() fails. Rename the 'use_iodwbsr_1' parameter and change it to a bool. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: mite: inline mite_setup()H Hartley Sweeten
This exported function simply calls mite_setup2() with the 'use_iodsbsr_1' parameter set to 0. Inline the simple function and remove the EXPORT_SYMBOL_GPL. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: s626: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: rtd520: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address of PCI bar 2. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: cb_pcidas64: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address of PCI bar 3. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: ni_670x: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: ni_6527: iounmap resource when detachedH Hartley Sweeten
PCI bar 1 is ioremap'ed during the (*auto_attach). This resource needs to be iounmap'ed when the driver is (*detach)ed. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: ni_6527: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: dt3000: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: daqboard2000: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: addi_apci_3xxx: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: icp_multi: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: mf6x4: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: me_daq: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: gsc_hpdi: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: ni_65xx: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address. Since this was the only member in the private data, remove the struct and its allocation. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: 8255_pci: use the comedi_device 'mmio' memberH Hartley Sweeten
Use the new 'mmio' member in the comedi_device for the ioremap'ed base address. Since this was the only member in the private data, remove the struct and its allocation. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: add an 'mmio' member to comedi_deviceH Hartley Sweeten
All the comedi drivers that use memory mapped io currently have a void __iomem * member in their private data for the driver. For some of the drivers this is actually the only member in that data. For convienence, add a new member to the comedi_device for this void __iomem *. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: amplc_pci230: tidy up stuct pci230_privateIan Abbott
Align the member comments a bit better in the declaration of `struct pci230_private`. Also remove the heading comment as it is just a boilerplate comedi comment. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: amplc_pci230: no need to initialize named members to zeroIan Abbott
The members of the elements of `pci230_boards[]` that are not explicitly named in their initializers will be initialized to 0 automatically, so there is no need to initialize them to 0 explicitly. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: amplc_pci230: add whitespace to pci230_boards[]Ian Abbott
Add a bit of whitespace to the initializer of `pci230_boards[]` for aesthetic reasons. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-30staging: comedi: amplc_pci230: no need for '&function'Ian Abbott
Remove the "address-of" operator when the operand is a function. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 13:37:07 +0000