summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-12-20selftests: net: Add a VLAN bridge binding selftestPetr Machata
Add a test that exercises bridge binding. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/baf7244fd1fe223a6d93e027584fa9f99dee982c.1734540770.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20selftests: net: lib: Add a couple autodefer helpersPetr Machata
Alongside the helper ip_link_set_up(), one to set the link down will be useful as well. Add a helper to determine the link state as well, ip_link_is_up(), and use it to short-circuit any changes if the state is already the desired one. Furthermore, add a helper bridge_vlan_add(). Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/856d9e01725fdba21b7f6716358f645b19131af2.1734540770.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20net: bridge: Handle changes in VLAN_FLAG_BRIDGE_BINDINGPetr Machata
When bridge binding is enabled on a VLAN netdevice, its link state should track bridge ports that are members of the corresponding VLAN. This works for newly-added netdevices. However toggling the option does not have the effect of enabling or disabling the behavior as appropriate. In this patch, react to bridge_binding toggles on VLAN uppers. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/90a8ca8aea4d81378b29d75d9e562433e0d5c7ff.1734540770.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20net: bridge: Extract a helper to handle bridge_binding togglesPetr Machata
Currently, the BROPT_VLAN_BRIDGE_BINDING bridge option is only toggled when VLAN devices are added on top of a bridge or removed from it. Extract the toggling of the option to a function so that it could be invoked by a subsequent patch when the state of an upper VLAN device changes. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/a7455f6fe1dfa7b13126ed8a7fb33d3b611eecb8.1734540770.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20inetpeer: avoid false sharing in inet_peer_xrlim_allow()Eric Dumazet
Under DOS, inet_peer_xrlim_allow() might be called millions of times per second from different cpus. Make sure to write over peer->rate_tokens and peer->rate_last only when really needed. Note the inherent races of this function are still there, we do not care of precise ICMP rate limiting. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20241219150330.3159027-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20Merge branch 'hisilicon-hns-deadcoding'Jakub Kicinski
Dr. David Alan Gilbert says: ==================== hisilicon hns deadcoding From: "Dr. David Alan Gilbert" <linux@treblig.org> A small set of deadcoding for functions that are not called, and a couple of function pointers that they called. Build tested only; I don't have the hardware. ==================== Link: https://patch.msgid.link/20241218163341.40297-1-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20net: hisilicon: hns: Remove unused enumsDr. David Alan Gilbert
The enums dsaf_roce_port_mode, dsaf_roce_port_num and dsaf_roce_qos_sl are unused after the removal of the reset code. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Jijie Shao<shaojijie@huawei.com> Link: https://patch.msgid.link/20241218163341.40297-5-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20net: hisilicon: hns: Remove reset helpersDr. David Alan Gilbert
With hns_dsaf_roce_reset() removed in a previous patch, the two helper member pointers, 'hns_dsaf_roce_srst', and 'hns_dsaf_srst_chns' are now unread. Remove them, and the helper functions that they were initialised to, that is hns_dsaf_srst_chns(), hns_dsaf_srst_chns_acpi(), hns_dsaf_roce_srst() and hns_dsaf_roce_srst_acpi(). Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Jijie Shao<shaojijie@huawei.com> Link: https://patch.msgid.link/20241218163341.40297-4-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20net: hisilicon: hns: Remove unused hns_rcb_startDr. David Alan Gilbert
hns_rcb_start() has been unused since 2016's commit 454784d85de3 ("net: hns: delete redundancy ring enable operations") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Jijie Shao<shaojijie@huawei.com> Link: https://patch.msgid.link/20241218163341.40297-3-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20net: hisilicon: hns: Remove unused hns_dsaf_roce_resetDr. David Alan Gilbert
hns_dsaf_roce_reset() has been unused since 2021's commit 38d220882426 ("RDMA/hns: Remove support for HIP06") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Jijie Shao<shaojijie@huawei.com> Link: https://patch.msgid.link/20241218163341.40297-2-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19Merge branch 'xdp-a-fistful-of-generic-changes-pt-iii'Jakub Kicinski
Alexander Lobakin says: ==================== xdp: a fistful of generic changes pt. III XDP for idpf is currently 5.(6) chapters: * convert Rx to libeth; * convert Tx and stats to libeth; * generic XDP and XSk code changes; * generic XDP and XSk code additions pt. 1; * generic XDP and XSk code additions pt. 2 (you are here); * actual XDP for idpf via new libeth_xdp; * XSk for idpf (via ^). Part III.3 does the following: * adds generic functions to build skbs from xdp_buffs (regular and XSk) and attach frags to xdp_buffs (regular and XSk); * adds helper to optimize XSk xmit in drivers. Everything is prereq for libeth_xdp, but will be useful standalone as well: less code in drivers, faster XSk XDP_PASS, smaller object code. ==================== Link: https://patch.msgid.link/20241218174435.1445282-1-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19xsk: add generic XSk &xdp_buff -> skb conversionAlexander Lobakin
Same as with converting &xdp_buff to skb on Rx, the code which allocates a new skb and copies the XSk frame there is identical across the drivers, so make it generic. This includes copying all the frags if they are present in the original buff. System percpu page_pools greatly improve XDP_PASS performance on XSk: instead of page_alloc() + page_free(), the net core recycles the same pages, so the only overhead left is memcpy()s. When the Page Pool is not compiled in, the whole function is a return-NULL (but it always gets selected when eBPF is enabled). Note that the passed buff gets freed if the conversion is done w/o any error, assuming you don't need this buffer after you convert it to an skb. Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241218174435.1445282-6-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19xsk: make xsk_buff_add_frag() really add the frag via __xdp_buff_add_frag()Alexander Lobakin
Currently, xsk_buff_add_frag() only adds the frag to pool's linked list, not doing anything with the &xdp_buff. The drivers do that manually and the logic is the same. Make it really add an skb frag, just like xdp_buff_add_frag() does that, and freeing frags on error if needed. This allows to remove repeating code from i40e and ice and not add the same code again and again. Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241218174435.1445282-5-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19xdp: add generic xdp_build_skb_from_buff()Alexander Lobakin
The code which builds an skb from an &xdp_buff keeps multiplying itself around the drivers with almost no changes. Let's try to stop that by adding a generic function. Unlike __xdp_build_skb_from_frame(), always allocate an skbuff head using napi_build_skb() and make use of the available xdp_rxq pointer to assign the Rx queue index. In case of PP-backed buffer, mark the skb to be recycled, as every PP user's been switched to recycle skbs. Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241218174435.1445282-4-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19xdp: add generic xdp_buff_add_frag()Alexander Lobakin
The code piece which would attach a frag to &xdp_buff is almost identical across the drivers supporting XDP multi-buffer on Rx. Make it a generic elegant "oneliner". Also, I see lots of drivers calculating frags_truesize as `xdp->frame_sz * nr_frags`. I can't say this is fully correct, since frags might be backed by chunks of different sizes, especially with stuff like the header split. Even page_pool_alloc() can give you two different truesizes on two subsequent requests to allocate the same buffer size. Add a field to &skb_shared_info (unionized as there's no free slot currently on x86_64) to track the "true" truesize. It can be used later when updating the skb. Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241218174435.1445282-3-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19page_pool: add page_pool_dev_alloc_netmem()Alexander Lobakin
Similarly to other _dev shorthands, add one for page_pool_alloc_netmem() to allocate a netmem using the default Rx GFP flags (ATOMIC | NOWARN) to make the page -> netmem transition of drivers easier. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241218174435.1445282-2-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19gre: Drop ip_route_output_gre().Guillaume Nault
We already have enough variants of ip_route_output*() functions. We don't need a GRE specific one in the generic route.h header file. Furthermore, ip_route_output_gre() is only used once, in ipgre_open(), where it can be easily replaced by a simple call to ip_route_output_key(). While there, and for clarity, explicitly set .flowi4_scope to RT_SCOPE_UNIVERSE instead of relying on the implicit zero initialisation. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/ab7cba47b8558cd4bfe2dc843c38b622a95ee48e.1734527729.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19af_unix: Add a prompt to CONFIG_AF_UNIX_OOBFlorent Revest
This makes it possible to disable the MSG_OOB support in .config. Signed-off-by: Florent Revest <revest@chromium.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241218143334.1507465-1-revest@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19selftests: net: remove redundant ncdevmem printJamal Hadi Salim
Remove extrenous fprintf Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20241218140018.15607-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19sfc: remove efx_writed_page_lockedAndy Moreton
From: Andy Moreton <andy.moreton@amd.com> efx_writed_page_locked is a workaround for Siena hardware that is not needed on later adapters, and has no callers. Remove it. Signed-off-by: Andy Moreton <andy.moreton@amd.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20241218135930.2350358-1-edward.cree@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: stmmac: Drop useless code related to ethtool rx-copybreakFurong Xu
After commit 2af6106ae949 ("net: stmmac: Introducing support for Page Pool"), the driver always copies frames to get a better performance, zero-copy for RX frames is no more, then these code turned to be useless and users of ethtool may get confused about the unhandled rx-copybreak parameter. This patch mostly reverts commit 22ad38381547 ("stmmac: do not perform zero-copy for rx frames") Signed-off-by: Furong Xu <0x1207@gmail.com> Link: https://patch.msgid.link/20241218083407.390509-1-0x1207@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: Document netmem driver supportMina Almasry
Document expectations from drivers looking to add support for device memory tcp or other netmem based features. Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20241217201206.2360389-1-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: airoha: Fix error path in airoha_probe()Lorenzo Bianconi
Do not run napi_disable() if airoha_hw_init() fails since Tx/Rx napi has not been started yet. In order to fix the issue, introduce airoha_qdma_stop_napi routine and remove napi_disable in airoha_hw_cleanup(). Fixes: 23020f049327 ("net: airoha: Introduce ethernet support for EN7581 SoC") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20241216-airoha_probe-error-path-fix-v2-1-6b10e04e9a5c@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19Merge branch 'net-add-and-use-phy_disable_eee'Jakub Kicinski
Heiner Kallweit says: ==================== net: add and use phy_disable_eee If a MAC driver doesn't support EEE, then the PHY shouldn't advertise it. Add phy_disable_eee() for this purpose, and use it in cpsw driver. ==================== Link: https://patch.msgid.link/5139374e-7151-4d0d-8ba9-9ec3d9b52f67@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: ethernet: ti: cpsw: disable PHY EEE advertisementHeiner Kallweit
It seems the cpsw MAC doesn't support EEE. See e.g. the commit message of ce2899428ec0 ("ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY"). There are cases where this causes issues if the PHY's on both sides have negotiated EEE. As a workaround EEE modes of the PHY are marked broken in DT, effectively disabling EEE advertisement. Improve this by using new function phy_disable_eee() in the MAC driver. This properly disables EEE advertisement, and allows to remove the eee-broken-xxx properties from DT. As EEE is disabled anyway, we can remove also the set_eee ethtool op. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/d08a798e-8565-422c-b2ed-121794db077f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: phy: add phy_disable_eeeHeiner Kallweit
If a MAC driver doesn't support EEE, then the PHY shouldn't advertise it. Add phy_disable_eee() for this purpose. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/fd51738c-dcd6-4d61-b8c5-faa6ac0f1026@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19Merge tag 'wireless-next-2024-12-19' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.14 Multi-Link Operation implementation continues, both in stack and in drivers. Otherwise it has been relatively quiet. Major changes: cfg80211/mac80211 - define wiphy guard - get TX power per link - EHT 320 MHz channel support for mesh ath11k - QCA6698AQ support ath9k - RX inactivity detection rtl8xxxu - add more USB device IDs rtw88 - add more USB device IDs - enable USB RX aggregation and USB 3 to improve performance rtw89 - PowerSave flow for Multi-Link Operation * tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits) wifi: wlcore: sysfs: constify 'struct bin_attribute' wifi: brcmfmac: clarify unmodifiable headroom log message wifi: brcmfmac: add missing header include for brcmf_dbg wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() wifi: qtnfmac: fix spelling error in core.h wifi: rtw89: phy: add dummy C2H event handler for report of TAS power wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read() wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc() wifi: rtlwifi: pci: wait for firmware loading before releasing memory wifi: rtlwifi: fix memory leaks and invalid access at probe error path wifi: rtlwifi: destroy workqueue at rtl_deinit_core wifi: rtlwifi: remove unused check_buddy_priv wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2 wifi: rtw89: regd: update regulatory map to R68-R51 wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ wifi: rtw89: disable firmware training HE GI and LTF wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS wifi: rtw89: ps: refactor channel info to firmware before entering PS wifi: rtw89: ps: refactor PS flow to support MLO wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s ... ==================== Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: netlink: catch attempts to send empty messagesJakub Kicinski
syzbot can figure out a way to redirect a netlink message to a tap. Sending empty skbs to devices is not valid and we end up hitting a skb_assert_len() in __dev_queue_xmit(). Make catching these mistakes easier, assert the skb size directly in netlink core. Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241218024400.824355-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: dsa: microchip: Add suspend/resume support to KSZ DSA driverTristram Ha
The KSZ DSA driver starts a timer to read MIB counters periodically to avoid count overrun. During system suspend this will give an error for not able to write to register as the SPI system returns an error when it is in suspend state. This implementation stops the timer when the system goes into suspend and restarts it when resumed. Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241218020311.70628-1-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19Merge branch 'bnxt_en-driver-update'Jakub Kicinski
Michael Chan says: ==================== bnxt_en: Driver update The first patch configures context memory for RoCE resources based on FW limits. The next 4 patches restrict certain ethtool operations when they are not supported. The last patch adds Pavan Chebbi as co-maintainer of the driver. v1: https://lore.kernel.org/20241215205943.2341612-1-michael.chan@broadcom.com ==================== Link: https://patch.msgid.link/20241217182620.2454075-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19MAINTAINERS: bnxt_en: Add Pavan Chebbi as co-maintainerMichael Chan
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241217182620.2454075-7-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19bnxt_en: Skip reading PXP registers during ethtool -d if unsupportedMichael Chan
Newer firmware does not allow reading the PXP registers during ethtool -d, so skip the firmware call in that case. Userspace (bnxt.c) always expects the register block to be populated so zeroes will be returned instead. Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241217182620.2454075-6-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19bnxt_en: Skip MAC loopback selftest if it is unsupported by FWMichael Chan
Call the new HWRM_PORT_MAC_QCAPS to check if mac loopback is supported. Skip the MAC loopback ethtool self test if it is not supported. Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20241217182620.2454075-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19bnxt_en: Skip PHY loopback ethtool selftest if unsupported by FWMichael Chan
Skip PHY loopback selftest if firmware advertises that it is unsupported in the HWRM_PORT_PHY_QCAPS call. Only show PHY loopback test result to be 0 if the test has run and passes. Do the same for external loopback to be consistent. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241217182620.2454075-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19bnxt_en: Do not allow ethtool -m on an untrusted VFMichael Chan
Block all ethtool module operations on an untrusted VF. The firmware won't allow it and will return error. Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241217182620.2454075-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19bnxt_en: Use FW defined resource limits for RoCEHongguang Gao
If FW supports setting resource limits for RoCE, then just use the FW limits instead of using some fixed values in the driver. These limits will be used to allocate context memory for QP, SRQ, AH, and MR resources for RoCE. Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241217182620.2454075-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc4). No conflicts. Adjacent changes: drivers/net/ethernet/renesas/rswitch.h 32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure") 922b4b955a03 ("net: renesas: rswitch: rework ts tags management") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19Merge tag 'net-6.13-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can and netfilter. Current release - regressions: - rtnetlink: try the outer netns attribute in rtnl_get_peer_net() - rust: net::phy fix module autoloading Current release - new code bugs: - phy: avoid undefined behavior in *_led_polarity_set() - eth: octeontx2-pf: fix netdev memory leak in rvu_rep_create() Previous releases - regressions: - smc: check sndbuf_space again after NOSPACE flag is set in smc_poll - ipvs: fix clamp() of ip_vs_conn_tab on small memory systems - dsa: restore dsa_software_vlan_untag() ability to operate on VLAN-untagged traffic - eth: - tun: fix tun_napi_alloc_frags() - ionic: no double destroy workqueue - idpf: trigger SW interrupt when exiting wb_on_itr mode - rswitch: rework ts tags management - team: fix feature exposure when no ports are present Previous releases - always broken: - core: fix repeated netlink messages in queue dump - mdiobus: fix an OF node reference leak - smc: check iparea_offset and ipv6_prefixes_cnt when receiving proposal msg - can: fix missed interrupts with m_can_pci - eth: oa_tc6: fix infinite loop error when tx credits becomes 0" * tag 'net-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) net: mctp: handle skb cleanup on sock_queue failures net: mdiobus: fix an OF node reference leak octeontx2-pf: fix error handling of devlink port in rvu_rep_create() octeontx2-pf: fix netdev memory leak in rvu_rep_create() psample: adjust size if rate_as_probability is set netdev-genl: avoid empty messages in queue dump net: dsa: restore dsa_software_vlan_untag() ability to operate on VLAN-untagged traffic selftests: openvswitch: fix tcpdump execution net: usb: qmi_wwan: add Quectel RG255C net: phy: avoid undefined behavior in *_led_polarity_set() netfilter: ipset: Fix for recursive locking warning ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems can: m_can: fix missed interrupts with m_can_pci can: m_can: set init flag earlier in probe rtnetlink: Try the outer netns attribute in rtnl_get_peer_net(). net: netdevsim: fix nsim_pp_hold_write() idpf: trigger SW interrupt when exiting wb_on_itr mode idpf: add support for SW triggered interrupts qed: fix possible uninit pointer read in qed_mcp_nvm_info_populate() net: ethernet: bgmac-platform: fix an OF node reference leak ...
2024-12-19Merge tag 'mmc-v6.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - mtk-sd: Cleanup the wakeup configuration in error/remove-path - sdhci-tegra: Correct quirk for ADMA2 length * tag 'mmc-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mtk-sd: disable wakeup in .remove() and in the error path of .probe() mmc: sdhci-tegra: Remove SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC quirk
2024-12-19Merge tag 'pwm/for-6.13-rc4-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm fix from Uwe Kleine-König: "Fix regression in pwm-stm32 driver when converting to new waveform support Fabrice Gasnier found and fixed a regression I introduced with v6.13-rc1 when converting the stm32 pwm driver to support the new waveform stuff. On some hardware variants this completely broke the driver" * tag 'pwm/for-6.13-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: pwm: stm32: Fix complementary output in round_waveform_tohw()
2024-12-19Merge tag 'v6.13-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: - Two fixes for better handling maximum outstanding requests - Fix simultaneous negotiate protocol race * tag 'v6.13-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: conn lock to serialize smb2 negotiate ksmbd: fix broken transfers when exceeding max simultaneous operations ksmbd: count all requests in req_running counter
2024-12-19Merge branch 'net-fib_rules-add-flow-label-selector-support'Paolo Abeni
Ido Schimmel says: ==================== net: fib_rules: Add flow label selector support In some deployments users would like to encode path information into certain bits of the IPv6 flow label, the UDP source port and the DSCP and use this information to route packets accordingly. Redirecting traffic to a routing table based on the flow label is not currently possible with Linux as FIB rules cannot match on it despite the flow label being available in the IPv6 flow key. This patchset extends FIB rules to match on the flow label with a mask. Future patches will add mask attributes to L4 ports and DSCP matches. Patches #1-#5 gradually extend FIB rules to match on the flow label. Patches #6-#7 allow user space to specify a flow label in route get requests. This is useful for both debugging and testing. Patch #8 adjusts the fib6_table_lookup tracepoint to print the flow label to the trace buffer for better observability. Patch #9 extends the FIB rule selftest with flow label test cases while utilizing the route get functionality from patch #6. ==================== Link: https://patch.msgid.link/20241216171201.274644-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19selftests: fib_rule_tests: Add flow label selector match testsIdo Schimmel
Add tests for the new FIB rule flow label selector. Test both good and bad flows and with both input and output routes. # ./fib_rule_tests.sh IPv6 FIB rule tests [...] TEST: rule6 check: flowlabel redirect to table [ OK ] TEST: rule6 check: flowlabel no redirect to table [ OK ] TEST: rule6 del by pref: flowlabel redirect to table [ OK ] TEST: rule6 check: iif flowlabel redirect to table [ OK ] TEST: rule6 check: iif flowlabel no redirect to table [ OK ] TEST: rule6 del by pref: iif flowlabel redirect to table [ OK ] TEST: rule6 check: flowlabel masked redirect to table [ OK ] TEST: rule6 check: flowlabel masked no redirect to table [ OK ] TEST: rule6 del by pref: flowlabel masked redirect to table [ OK ] TEST: rule6 check: iif flowlabel masked redirect to table [ OK ] TEST: rule6 check: iif flowlabel masked no redirect to table [ OK ] TEST: rule6 del by pref: iif flowlabel masked redirect to table [ OK ] [...] Tests passed: 268 Tests failed: 0 Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19tracing: ipv6: Add flow label to fib6_table_lookup tracepointIdo Schimmel
The different parameters affecting the IPv6 route lookup are printed to the trace buffer by the fib6_table_lookup tracepoint. Add the IPv6 flow label for better observability as it can affect the route lookup both in terms of multipath hash calculation and policy based routing (FIB rules). Example: # echo 1 > /sys/kernel/tracing/events/fib6/fib6_table_lookup/enable # ip -6 route get ::1 flowlabel 0x12345 ipproto udp sport 12345 dport 54321 &> /dev/null # cat /sys/kernel/tracing/trace_pipe ip-358 [010] ..... 44.897484: fib6_table_lookup: table 255 oif 0 iif 1 proto 17 ::/12345 -> ::1/54321 flowlabel 0x12345 tos 0 scope 0 flags 0 ==> dev lo gw :: err 0 Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19netlink: specs: Add route flow label attributeIdo Schimmel
Add the new flow label attribute to the spec. Example: # ip link add name dummy1 up type dummy # ip -6 route add default table 254 dev dummy1 # ip -6 route add default table 10 dev dummy1 # ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \ --do newrule \ --json '{"family": 10, "priority": 1, "flowlabel": 10, "flowlabel-mask": 255, "action": 1, "table": 10}' None $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_route.yaml \ --do getroute \ --json '{"rtm-family": 10, "rta-flowlabel": 1}' --output-json \ | jq '.["rta-table"]' 254 $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_route.yaml \ --do getroute \ --json '{"rtm-family": 10, "rta-flowlabel": 10}' --output-json \ | jq '.["rta-table"]' 10 Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19ipv6: Add flow label to route get requestsIdo Schimmel
The default IPv6 multipath hash policy takes the flow label into account when calculating a multipath hash and previous patches added a flow label selector to IPv6 FIB rules. Allow user space to specify a flow label in route get requests by adding a new netlink attribute and using its value to populate the "flowlabel" field in the IPv6 flow info structure prior to a route lookup. Deny the attribute in RTM_{NEW,DEL}ROUTE requests by checking for it in rtm_to_fib6_config() and returning an error if present. A subsequent patch will use this capability to test the new flow label selector in IPv6 FIB rules. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19netlink: specs: Add FIB rule flow label attributesIdo Schimmel
Add the new flow label attributes to the spec. Example: # ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \ --do newrule \ --json '{"family": 10, "flowlabel": 1, "flowlabel-mask": 1, "action": 1, "table": 1}' None $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \ --dump getrule --json '{"family": 10}' --output-json \ | jq '.[] | select(.flowlabel == "0x1")' { "table": 1, "suppress-prefixlen": "0xffffffff", "protocol": 0, "priority": 32765, "flowlabel": "0x1", "flowlabel-mask": "0x1", "family": 10, "dst-len": 0, "src-len": 0, "tos": 0, "action": "to-tbl", "flags": 0 } Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19net: fib_rules: Enable flow label selector usageIdo Schimmel
Now that both IPv4 and IPv6 correctly handle the new flow label attributes, enable user space to configure FIB rules that make use of the flow label by changing the policy to stop rejecting them and accepting 32 bit values in big-endian byte order. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19ipv6: fib_rules: Add flow label supportIdo Schimmel
Implement support for the new flow label selector which allows IPv6 FIB rules to match on the flow label with a mask. Ensure that both flow label attributes are specified (or none) and that the mask is valid. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19ipv4: fib_rules: Reject flow label attributesIdo Schimmel
IPv4 FIB rules cannot match on flow label so reject requests that try to add such rules. Do that in the IPv4 configure callback as the netlink policy resides in the core and used by both IPv4 and IPv6. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 13:25:54 +0000