| Age | Commit message (Collapse) | Author |
|---|
|
'fixes-on-the-open-alliance-tc6-10base-t1x-mac-phy-support-generic-lib'
Parthiban Veerasooran says:
====================
Fixes on the OPEN Alliance TC6 10BASE-T1x MAC-PHY support generic lib
This patch series contain the below fixes.
- Infinite loop error when tx credits becomes 0.
- Race condition between tx skb reference pointers.
v2:
- Added mutex lock to protect tx skb reference handling.
v3:
- Added mutex protection in assigning new tx skb to waiting_tx_skb
pointer.
- Explained the possible scenario for the race condition with the time
diagram in the commit message.
v4:
- Replaced mutex with spin_lock_bh() variants as the start_xmit runs in
BH/softirq context which can't take sleeping locks.
====================
Link: https://patch.msgid.link/20241213123159.439739-1-parthiban.veerasooran@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There are two skb pointers to manage tx skb's enqueued from n/w stack.
waiting_tx_skb pointer points to the tx skb which needs to be processed
and ongoing_tx_skb pointer points to the tx skb which is being processed.
SPI thread prepares the tx data chunks from the tx skb pointed by the
ongoing_tx_skb pointer. When the tx skb pointed by the ongoing_tx_skb is
processed, the tx skb pointed by the waiting_tx_skb is assigned to
ongoing_tx_skb and the waiting_tx_skb pointer is assigned with NULL.
Whenever there is a new tx skb from n/w stack, it will be assigned to
waiting_tx_skb pointer if it is NULL. Enqueuing and processing of a tx skb
handled in two different threads.
Consider a scenario where the SPI thread processed an ongoing_tx_skb and
it moves next tx skb from waiting_tx_skb pointer to ongoing_tx_skb pointer
without doing any NULL check. At this time, if the waiting_tx_skb pointer
is NULL then ongoing_tx_skb pointer is also assigned with NULL. After
that, if a new tx skb is assigned to waiting_tx_skb pointer by the n/w
stack and there is a chance to overwrite the tx skb pointer with NULL in
the SPI thread. Finally one of the tx skb will be left as unhandled,
resulting packet missing and memory leak.
- Consider the below scenario where the TXC reported from the previous
transfer is 10 and ongoing_tx_skb holds an tx ethernet frame which can be
transported in 20 TXCs and waiting_tx_skb is still NULL.
tx_credits = 10; /* 21 are filled in the previous transfer */
ongoing_tx_skb = 20;
waiting_tx_skb = NULL; /* Still NULL */
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true.
- After oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = 10;
waiting_tx_skb = NULL; /* Still NULL */
- Perform SPI transfer.
- Process SPI rx buffer to get the TXC from footers.
- Now let's assume previously filled 21 TXCs are freed so we are good to
transport the next remaining 10 tx chunks from ongoing_tx_skb.
tx_credits = 21;
ongoing_tx_skb = 10;
waiting_tx_skb = NULL;
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true again.
- In the oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = NULL;
waiting_tx_skb = NULL;
- Now the below bad case might happen,
Thread1 (oa_tc6_start_xmit) Thread2 (oa_tc6_spi_thread_handler)
--------------------------- -----------------------------------
- if waiting_tx_skb is NULL
- if ongoing_tx_skb is NULL
- ongoing_tx_skb = waiting_tx_skb
- waiting_tx_skb = skb
- waiting_tx_skb = NULL
...
- ongoing_tx_skb = NULL
- if waiting_tx_skb is NULL
- waiting_tx_skb = skb
To overcome the above issue, protect the moving of tx skb reference from
waiting_tx_skb pointer to ongoing_tx_skb pointer and assigning new tx skb
to waiting_tx_skb pointer, so that the other thread can't access the
waiting_tx_skb pointer until the current thread completes moving the tx
skb reference safely.
Fixes: 53fbde8ab21e ("net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames")
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
SPI thread wakes up to perform SPI transfer whenever there is an TX skb
from n/w stack or interrupt from MAC-PHY. Ethernet frame from TX skb is
transferred based on the availability tx credits in the MAC-PHY which is
reported from the previous SPI transfer. Sometimes there is a possibility
that TX skb is available to transmit but there is no tx credits from
MAC-PHY. In this case, there will not be any SPI transfer but the thread
will be running in an endless loop until tx credits available again.
So checking the availability of tx credits along with TX skb will prevent
the above infinite loop. When the tx credits available again that will be
notified through interrupt which will trigger the SPI transfer to get the
available tx credits.
Fixes: 53fbde8ab21e ("net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Kuniyuki Iwashima says:
====================
af_unix: Prepare for skb drop reason.
This is a prep series and cleans up error paths in the following
functions
* unix_stream_connect()
* unix_stream_sendmsg()
* unix_dgram_sendmsg()
to make it easy to add skb drop reason for AF_UNIX, which seems to
have a potential user.
https://lore.kernel.org/netdev/CAAf2ycmZHti95WaBR3s+L5Epm1q7sXmvZ-EqCK=-oZj=45tOwQ@mail.gmail.com/
v1: https://lore.kernel.org/netdev/20241206052607.1197-1-kuniyu@amazon.com/
====================
Link: https://patch.msgid.link/20241213110850.25453-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
unix_our_peer() is used only in unix_may_send().
Let's inline it in unix_may_send().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The error path is complicated in unix_dgram_sendmsg() because there
are two timings when other could be non-NULL: when it's fetched from
unix_peer_get() and when it's looked up by unix_find_other().
Let's move unix_peer_get() to the else branch for unix_find_other()
and clean up the error paths.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When other has SOCK_DEAD in unix_dgram_sendmsg(), we hold
unix_state_lock() for the sender socket first.
However, we do not need it for sk->sk_type.
Let's move the lock down a bit.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When other has SOCK_DEAD in unix_dgram_sendmsg(), we call sock_put() for
it first and then set NULL to other before jumping to the error path.
This is to skip sock_put() in the error path.
Let's not set NULL to other and defer the sock_put() to the error path
to clean up the labels later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There are two paths jumping to the restart label in unix_dgram_sendmsg().
One requires another lookup and sk_filter(), but the other doesn't.
Let's split the label to make each flow more straightforward.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In unix_dgram_sendmsg(), we use a local variable sunaddr pointing
NULL or msg->msg_name based on msg->msg_namelen.
Let's remove sunaddr and simplify the usage.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When other is NULL in unix_dgram_sendmsg(), we check if sunaddr
is NULL before looking up a receiver socket.
There are three paths going through the check, but it's always
false for 2 out of the 3 paths: the first socket lookup and the
second 'goto restart'.
The condition can be true for the first 'goto restart' only when
SOCK_DEAD is flagged for the socket found with msg->msg_name.
Let's move the check to the single appropriate path.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We will introduce skb drop reason for AF_UNIX, then we need to
set an errno and a drop reason for each path.
Let's set an error only when it's needed in unix_dgram_sendmsg().
Then, we need not (re)set 0 to err.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If we move send_sig() to the SEND_SHUTDOWN check before
the while loop, then we can reuse the same kfree_skb()
after the pipe_err_free label.
Let's gather the scattered kfree_skb()s in error paths.
While at it, some style issues are fixed, and the pipe_err_free
label is renamed to out_pipe to match other label names.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We will introduce skb drop reason for AF_UNIX, then we need to
set an errno and a drop reason for each path.
Let's set an error only when it's needed in unix_stream_sendmsg().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The label order is weird in unix_stream_connect(), and all NULL checks
are unnecessary if reordered.
Let's clean up the error paths to make it easy to set a drop reason
for each path.
While at it, a comment with the old style is updated.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We will introduce skb drop reason for AF_UNIX, then we need to
set an errno and a drop reason for each path.
Let's set an error only when it's needed in unix_stream_connect().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The alias symbol name was renamed. Adjust module_phy_driver macro to
create the proper symbol name to fix module autoloading.
Fixes: 054a9cd395a7 ("modpost: rename alias symbol for MODULE_DEVICE_TABLE()")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20241212130015.238863-1-fujita.tomonori@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The hypercall page is no longer needed. It can be removed, as from the
Xen perspective it is optional.
But, from Linux's perspective, it removes naked RET instructions that
escape the speculative protections that Call Depth Tracking and/or
Untrain Ret are trying to achieve.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
|
|
Call the Xen hypervisor via the new xen_hypercall_func static-call
instead of the hypercall page.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
Add generic hypercall functions usable for all normal (i.e. not iret)
hypercalls. Depending on the guest type and the processor vendor
different functions need to be used due to the to be used instruction
for entering the hypervisor:
- PV guests need to use syscall
- HVM/PVH guests on Intel need to use vmcall
- HVM/PVH guests on AMD and Hygon need to use vmmcall
As PVH guests need to issue hypercalls very early during boot, there
is a 4th hypercall function needed for HVM/PVH which can be used on
Intel and AMD processors. It will check the vendor type and then set
the Intel or AMD specific function to use via static_call().
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
|
|
Heiner Kallweit says:
====================
r8169: add support for RTL8125D rev.b
Add support for RTL8125D rev.b. Its XID is 0x689. It is basically
based on the one with XID 0x688, but with different firmware file.
To avoid a mess with the version numbering, adjust it first.
====================
Link: https://patch.msgid.link/15c4a9fd-a653-4b09-825d-751964832a7a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for RTL8125D rev.b. Its XID is 0x689. It is basically
based on the one with XID 0x688, but with different firmware file.
Signed-off-by: ChunHao Lin <hau@realtek.com>
[hkallweit1@gmail.com: rebased after adjusted version numbering]
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/75e5e9ec-d01f-43ac-b0f4-e7456baf18d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adjust version numbering for RTL8126, so that it doesn't overlap with
new RTL8125 versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/6a354364-20e9-48ad-a198-468264288757@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a check for NULL at the start of create_txqs() and
create_rxqs() which tess if "nic_dev->txqs" is non-NULL. The
intention is that if the device is already open and the queues
are already created then we don't create them a second time.
However, the bug is that if we have an error in the create_txqs()
then the pointer doesn't get set back to NULL. The NULL check
at the start of the function will say that it's already open when
it's not and the device can't be used.
Set ->txqs back to NULL on cleanup on error.
Fixes: c3e79baf1b03 ("net-next/hinic: Add logical Txq and Rxq")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0cc98faf-a0ed-4565-a55b-0fa2734bc205@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Small follow-up to align this to an equivalent behavior as the bond driver.
The change in 3625920b62c3 ("teaming: fix vlan_features computing") removed
the netdevice vlan_features when there is no team port attached, yet it
leaves the full set of enc_features intact.
Instead, leave the default features as pre 3625920b62c3, and recompute once
we do have ports attached. Also, similarly as in bonding case, call the
netdev_base_features() helper on the enc_features.
Fixes: 3625920b62c3 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241213123657.401868-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Anna Emese Nyiri says:
====================
Add support for SO_PRIORITY cmsg
Introduce a new helper function, `sk_set_prio_allowed`,
to centralize the logic for validating priority settings.
Add support for the `SO_PRIORITY` control message,
enabling user-space applications to set socket priority
via control messages (cmsg).
====================
Link: https://patch.msgid.link/20241213084457.45120-1-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit 6fd1d51cfa253 ("net: SO_RCVMARK socket option
for SO_MARK with recvmsg()").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-5-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend cmsg_sender.c with a new option '-Q' to send SO_PRIORITY
ancillary data.
cmsg_so_priority.sh script added to validate SO_PRIORITY behavior
by creating VLAN device with egress QoS mapping and testing packet
priorities using flower filters. Verify that packets with different
priorities are correctly matched and counted by filters for multiple
protocols and IP versions.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-4-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Linux socket API currently allows setting SO_PRIORITY at the
socket level, applying a uniform priority to all packets sent through
that socket. The exception to this is IP_TOS, when the priority value
is calculated during the handling of
ancillary data, as implemented in commit f02db315b8d8 ("ipv4: IP_TOS
and IP_TTL can be specified as ancillary data").
However, this is a computed
value, and there is currently no mechanism to set a custom priority
via control messages prior to this patch.
According to this patch, if SO_PRIORITY is specified as ancillary data,
the packet is sent with the priority value set through
sockc->priority, overriding the socket-level values
set via the traditional setsockopt() method. This is analogous to
the existing support for SO_MARK, as implemented in
commit c6af0c227a22 ("ip: support SO_MARK cmsg").
If both cmsg SO_PRIORITY and IP_TOS are passed, then the one that
takes precedence is the last one in the cmsg list.
This patch has the side effect that raw_send_hdrinc now interprets cmsg
IP_TOS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-3-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify priority setting permissions with the 'sk_set_prio_allowed'
function, centralizing the validation logic. This change is made in
anticipation of a second caller in a following patch.
No functional changes.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-2-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the missing phys-binding attr to the mctp-attrs in the rt_link spec.
This fixes commit 580db513b4a9 ("net: mctp: Expose transport binding
identifier via IFLA attribute").
Note that enum mctp_phys_binding is not currently uapi, but perhaps it
should be?
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241213112551.33557-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "gl->tot_len" variable is controlled by the user. It comes from
process_responses(). On 32bit systems, the "gl->tot_len +
sizeof(struct cpl_pass_accept_req) + sizeof(struct rss_header)" addition
could have an integer wrapping bug. Use size_add() to prevent this.
Fixes: a08943947873 ("crypto: chtls - Register chtls with net tls")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c6bfb23c-2db2-4e1b-b8ab-ba3925c82ef5@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When userspace is adding data to an RPC call for transmission, it must pass
MSG_MORE to sendmsg() if it intends to add more data in future calls to
sendmsg(). Calling sendmsg() without MSG_MORE being asserted closes the
transmission phase of the call (assuming sendmsg() adds all the data
presented) and further attempts to add more data should be rejected.
However, this is no longer the case. The change of call state that was
previously the guard got bumped over to the I/O thread, which leaves a
window for a repeat sendmsg() to insert more data. This previously went
unnoticed, but the more recent patch that changed the structures behind the
Tx queue added a warning:
WARNING: CPU: 3 PID: 6639 at net/rxrpc/sendmsg.c:296 rxrpc_send_data+0x3f2/0x860
and rejected the additional data, returning error EPROTO.
Fix this by adding a guard flag to the call, setting the flag when we queue
the final packet and then rejecting further attempts to add data with
EPROTO.
Fixes: 2d689424b618 ("rxrpc: Move call state changes from sendmsg to I/O thread")
Reported-by: syzbot+ff11be94dfcd7a5af8da@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/6757fb68.050a0220.2477f.005f.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: syzbot+ff11be94dfcd7a5af8da@syzkaller.appspotmail.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/2870480.1734037462@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use spin_lock_irq(), not spin_lock_bh() to take the lock when accessing the
->attend_link() to stop a delay in the I/O thread due to an interrupt being
taken in the app thread whilst that holds the lock and vice versa.
Fixes: a2ea9a907260 ("rxrpc: Use irq-disabling spinlocks between app and I/O thread")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/2870146.1734037095@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
netdev: fix repeated netlink messages in queue dumps
Fix dump continuation for queues and queue stats in the netdev family.
Because we used post-increment when saving id of dumped queue next
skb would re-dump the already dumped queue.
====================
Link: https://patch.msgid.link/20241213152244.3080955-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sanity check netlink dumps, to make sure dumps don't have
repeated entries or gaps in IDs.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test already catches a netlink bug fixed by this series,
but only when running on HW with many queues. Make sure the
netdevsim instance created has a lot of queues, and constrain
the size of the recv_buffer used by netlink.
While at it test both rx and tx queues.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
recv_size parameter allows constraining the buffer size for dumps.
It's useful in testing kernel handling of dump continuation,
IOW testing dumps which span multiple skbs.
Let the tests set this parameter when initializing the YNL family.
Keep the normal default, we don't want tests to unintentionally
behave very differently than normal code.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 103 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 103 != 100 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 102 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 102 != 100 missing queue keys
not ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:4 fail:1 xfail:0 xpass:0 skip:0 error:0
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: ab63a2387cb9 ("netdev: add per-queue statistics")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 102 != 100
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 101 != 100
not ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0
not ok 1 selftests: drivers/net: queues.py # exit=1
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 6b6171db7fc8 ("netdev-genl: Add netlink framework functions for queue")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next 2024-12-16
The following pull-request contains mlx5 IFC updates.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add device cap abs_native_port_num
net/mlx5: qos: Add ifc support for cross-esw scheduling
net/mlx5: Add support for new scheduling elements
net/mlx5: Add ConnectX-8 device to ifc
net/mlx5: ifc: Reorganize mlx5_ifc_flow_table_context_bits
====================
Link: https://patch.msgid.link/20241216124028.973763-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC performs value range tracking for variables as a way to provide better
diagnostics. One place this is regularly seen is with warnings associated
with bounds-checking, e.g. -Wstringop-overflow, -Wstringop-overread,
-Warray-bounds, etc. In order to keep the signal-to-noise ratio high,
warnings aren't emitted when a value range spans the entire value range
representable by a given variable. For example:
unsigned int len;
char dst[8];
...
memcpy(dst, src, len);
If len's value is unknown, it has the full "unsigned int" range of [0,
UINT_MAX], and GCC's compile-time bounds checks against memcpy() will
be ignored. However, when a code path has been able to narrow the range:
if (len > 16)
return;
memcpy(dst, src, len);
Then the range will be updated for the execution path. Above, len is
now [0, 16] when reading memcpy(), so depending on other optimizations,
we might see a -Wstringop-overflow warning like:
error: '__builtin_memcpy' writing between 9 and 16 bytes into region of size 8 [-Werror=stringop-overflow]
When building with CONFIG_FORTIFY_SOURCE, the fortified run-time bounds
checking can appear to narrow value ranges of lengths for memcpy(),
depending on how the compiler constructs the execution paths during
optimization passes, due to the checks against the field sizes. For
example:
if (p_size_field != SIZE_MAX &&
p_size != p_size_field && p_size_field < size)
As intentionally designed, these checks only affect the kernel warnings
emitted at run-time and do not block the potentially overflowing memcpy(),
so GCC thinks it needs to produce a warning about the resulting value
range that might be reaching the memcpy().
We have seen this manifest a few times now, with the most recent being
with cpumasks:
In function ‘bitmap_copy’,
inlined from ‘cpumask_copy’ at ./include/linux/cpumask.h:839:2,
inlined from ‘__padata_set_cpumasks’ at kernel/padata.c:730:2:
./include/linux/fortify-string.h:114:33: error: ‘__builtin_memcpy’ reading between 257 and 536870904 bytes from a region of size 256 [-Werror=stringop-overread]
114 | #define __underlying_memcpy __builtin_memcpy
| ^
./include/linux/fortify-string.h:633:9: note: in expansion of macro ‘__underlying_memcpy’
633 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
./include/linux/fortify-string.h:678:26: note: in expansion of macro ‘__fortify_memcpy_chk’
678 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
./include/linux/bitmap.h:259:17: note: in expansion of macro ‘memcpy’
259 | memcpy(dst, src, len);
| ^~~~~~
kernel/padata.c: In function ‘__padata_set_cpumasks’:
kernel/padata.c:713:48: note: source object ‘pcpumask’ of size [0, 256]
713 | cpumask_var_t pcpumask,
| ~~~~~~~~~~~~~~^~~~~~~~
This warning is _not_ emitted when CONFIG_FORTIFY_SOURCE is disabled,
and with the recent -fdiagnostics-details we can confirm the origin of
the warning is due to FORTIFY's bounds checking:
../include/linux/bitmap.h:259:17: note: in expansion of macro 'memcpy'
259 | memcpy(dst, src, len);
| ^~~~~~
'__padata_set_cpumasks': events 1-2
../include/linux/fortify-string.h:613:36:
612 | if (p_size_field != SIZE_MAX &&
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
613 | p_size != p_size_field && p_size_field < size)
| ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
| |
| (1) when the condition is evaluated to false
| (2) when the condition is evaluated to true
'__padata_set_cpumasks': event 3
114 | #define __underlying_memcpy __builtin_memcpy
| ^
| |
| (3) out of array bounds here
Note that the cpumask warning started appearing since bitmap functions
were recently marked __always_inline in commit ed8cd2b3bd9f ("bitmap:
Switch from inline to __always_inline"), which allowed GCC to gain
visibility into the variables as they passed through the FORTIFY
implementation.
In order to silence these false positives but keep otherwise deterministic
compile-time warnings intact, hide the length variable from GCC with
OPTIMIZE_HIDE_VAR() before calling the builtin memcpy.
Additionally add a comment about why all the macro args have copies with
const storage.
Reported-by: "Thomas Weißschuh" <linux@weissschuh.net>
Closes: https://lore.kernel.org/all/db7190c8-d17f-4a0d-bc2f-5903c79f36c2@t-8ch.de/
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Closes: https://lore.kernel.org/all/20241112124127.1666300-1-nilay@linux.ibm.com/
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
When function tracing and function graph tracing are both enabled (in
different instances) the "parent" of some of the function tracing events
is "return_to_handler" which is the trampoline used by function graph
tracing. To fix this, ftrace_get_true_parent_ip() was introduced that
returns the "true" parent ip instead of the trampoline.
To do this, the ftrace_regs_get_stack_pointer() is used, which uses
kernel_stack_pointer(). The problem is that microblaze does not implement
kerenl_stack_pointer() so when function graph tracing is enabled, the
build fails. But microblaze also does not enabled HAVE_DYNAMIC_FTRACE_WITH_ARGS.
That option has to be enabled by the architecture to reliably get the
values from the fregs parameter passed in. When that config is not set,
the architecture can also pass in NULL, which is not tested for in that
function and could cause the kernel to crash.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Jeff Xie <jeff.xie@linux.dev>
Link: https://lore.kernel.org/20241216164633.6df18e87@gandalf.local.home
Fixes: 60b1f578b578 ("ftrace: Get the true parent ip for function tracer")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
A bug was discovered where the idle shadow stacks were not initialized
for offline CPUs when starting function graph tracer, and when they came
online they were not traced due to the missing shadow stack. To fix
this, the idle task shadow stack initialization was moved to using the
CPU hotplug callbacks. But it removed the initialization when the
function graph was enabled. The problem here is that the hotplug
callbacks are called when the CPUs come online, but the idle shadow
stack initialization only happens if function graph is currently
active. This caused the online CPUs to not get their shadow stack
initialized.
The idle shadow stack initialization still needs to be done when the
function graph is registered, as they will not be allocated if function
graph is not registered.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241211135335.094ba282@batman.local.home
Fixes: 2c02f7375e65 ("fgraph: Use CPU hotplug mechanism to initialize idle shadow stacks")
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Closes: https://lore.kernel.org/all/CACRpkdaTBrHwRbbrphVy-=SeDz6MSsXhTKypOtLrTQ+DgGAOcQ@mail.gmail.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Three small fixes for the soc tree:
- devicetee fix for the Arm Juno reference machine, to allow more
interesting PCI configurations
- build fix for SCMI firmware on the NXP i.MX platform
- fix for a race condition in Arm FF-A firmware"
* tag 'soc-fixes-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: fvp: Update PCIe bus-range property
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
firmware: arm_scmi: Fix i.MX build dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi:
- Add support for Alienware m16 R1 AMD
- Do not setup legacy LED control with X and G Series
- intel/ifs: Clearwater Forest support
- intel/vsec: Panther Lake support
- p2sb: Do not hide the device if BIOS left it unhidden
- touchscreen_dmi: Add SARY Tab 3 tablet information
* tag 'platform-drivers-x86-v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/vsec: Add support for Panther Lake
platform/x86/intel/ifs: Add Clearwater Forest to CPU support list
platform/x86: touchscreen_dmi: Add info for SARY Tab 3 tablet
p2sb: Do not scan and remove the P2SB device when it is unhidden
p2sb: Move P2SB hide and unhide code to p2sb_scan_and_cache()
p2sb: Introduce the global flag p2sb_hidden_by_bios
p2sb: Factor out p2sb_read_from_cache()
alienware-wmi: Adds support to Alienware m16 R1 AMD
alienware-wmi: Fix X Series and G Series quirks
|
|
For many use cases (e.g. container images are just fetched from remote),
performance will be impacted if underlay page cache is up-to-date but
direct i/o flushes dirty pages first.
Instead, let's use buffered I/O by default to keep in sync with loop
devices and add a (re)mount option to explicitly give a try to use
direct I/O if supported by the underlying files.
The container startup time is improved as below:
[workload] docker.io/library/workpress:latest
unpack 1st run non-1st runs
EROFS snapshotter buffered I/O file 4.586404265s 0.308s 0.198s
EROFS snapshotter direct I/O file 4.581742849s 2.238s 0.222s
EROFS snapshotter loop 4.596023152s 0.346s 0.201s
Overlayfs snapshotter 5.382851037s 0.206s 0.214s
Fixes: fb176750266a ("erofs: add file-backed mount support")
Cc: Derek McGowan <derek@mcg.dev>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241212134336.2059899-1-hsiangkao@linux.alibaba.com
|
|
Record `m_sb` and `m_dif` to replace `m_fscache`, `m_daxdev`, `m_fp`
and `m_dax_part_off` in order to simplify the codebase.
Note that `m_bdev` is still left since it can be assigned from
`sb->s_bdev` directly.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241212235401.2857246-1-hsiangkao@linux.alibaba.com
|
|
Instead of just listing each one directly in `struct erofs_sb_info`
except that we still use `sb->s_bdev` for the primary block device.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241216125310.930933-2-hsiangkao@linux.alibaba.com
|
|
Kory Maincent says:
====================
net: Make timestamping selectable
Up until now, there was no way to let the user select the hardware
PTP provider at which time stamping occurs. The stack assumed that PHY time
stamping is always preferred, but some MAC/PHY combinations were buggy.
This series updates the default MAC/PHY default timestamping and aims to
allow the user to select the desired hwtstamp provider administratively.
Here is few netlink spec usage examples:
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema
--dump tsinfo-get
--json '{"header":{"dev-name":"eth0"}}'
[{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtst-provider': {'index': 0, 'qualifier': 0},
'phc-index': 0,
'rx-filters': {'bits': {'bit': [{'index': 0, 'name': 'none'},
{'index': 2, 'name': 'some'}]},
'nomask': True,
'size': 16},
'timestamping': {'bits': {'bit': [{'index': 0, 'name': 'hardware-transmit'},
{'index': 2, 'name': 'hardware-receive'},
{'index': 6,
'name': 'hardware-raw-clock'}]},
'nomask': True,
'size': 17},
'tx-types': {'bits': {'bit': [{'index': 0, 'name': 'off'},
{'index': 1, 'name': 'on'}]},
'nomask': True,
'size': 4}},
{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtst-provider': {'index': 2, 'qualifier': 0},
'phc-index': 2,
'rx-filters': {'bits': {'bit': [{'index': 0, 'name': 'none'},
{'index': 1, 'name': 'all'}]},
'nomask': True,
'size': 16},
'timestamping': {'bits': {'bit': [{'index': 0, 'name': 'hardware-transmit'},
{'index': 1, 'name': 'software-transmit'},
{'index': 2, 'name': 'hardware-receive'},
{'index': 3, 'name': 'software-receive'},
{'index': 4,
'name': 'software-system-clock'},
{'index': 6,
'name': 'hardware-raw-clock'}]},
'nomask': True,
'size': 17},
'tx-types': {'bits': {'bit': [{'index': 0, 'name': 'off'},
{'index': 1, 'name': 'on'},
{'index': 2, 'name': 'onestep-sync'}]},
'nomask': True,
'size': 4}}]
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsinfo-get
--json '{"header":{"dev-name":"eth0"},
"hwtst-provider":{"index":0, "qualifier":0 }
}'
{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtst-provider': {'index': 0, 'qualifier': 0},
'phc-index': 0,
'rx-filters': {'bits': {'bit': [{'index': 0, 'name': 'none'},
{'index': 2, 'name': 'some'}]},
'nomask': True,
'size': 16},
'timestamping': {'bits': {'bit': [{'index': 0, 'name': 'hardware-transmit'},
{'index': 2, 'name': 'hardware-receive'},
{'index': 6, 'name': 'hardware-raw-clock'}]},
'nomask': True,
'size': 17},
'tx-types': {'bits': {'bit': [{'index': 0, 'name': 'off'},
{'index': 1, 'name': 'on'}]},
'nomask': True,
'size': 4}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsinfo-set
--json '{"header":{"dev-name":"eth0"},
"hwtst-provider":{"index":2, "qualifier":0}}'
None
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsconfig-get
--json '{"header":{"dev-name":"eth0"}}'
{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtstamp-flags': 1,
'hwtstamp-provider': {'index': 1, 'qualifier': 0},
'rx-filters': {'bits': {'bit': [{'index': 12, 'name': 'ptpv2-event'}]},
'nomask': True,
'size': 16},
'tx-types': {'bits': {'bit': [{'index': 1, 'name': 'on'}]},
'nomask': True,
'size': 4}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsconfig-set
--json '{"header":{"dev-name":"eth0"},
"hwtstamp-provider":{"index":1, "qualifier":0 },
"rx-filters":{"bits": {"bit": {"name":"ptpv2-l4-event"}},
"nomask": 1},
"tx-types":{"bits": {"bit": {"name":"on"}},
"nomask": 1}}'
{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtstamp-flags': 1,
'hwtstamp-provider': {'index': 1, 'qualifier': 0},
'rx-filters': {'bits': {'bit': [{'index': 12, 'name': 'ptpv2-event'}]},
'nomask': True,
'size': 16},
'tx-types': {'bits': {'bit': [{'index': 1, 'name': 'on'}]},
'nomask': True,
'size': 4}}
Changes in v21:
- NIT fixes.
- Link to v20: https://lore.kernel.org/r/20241204-feature_ptp_netnext-v20-0-9bd99dc8a867@bootlin.com
Changes in v20:
- Change hwtstamp provider design to avoid saving "user" (phy or net) in
the ptp clock structure.
- Link to v19: https://lore.kernel.org/r/20241030-feature_ptp_netnext-v19-0-94f8aadc9d5c@bootlin.com
Changes in v19:
- Rebase on net-next
- Link to v18: https://lore.kernel.org/r/20241023-feature_ptp_netnext-v18-0-ed948f3b6887@bootlin.com
Changes in v18:
- Few changes in the tsconfig-set ethtool command.
- Add tsconfig-set-reply ethtool netlink socket.
- Add missing netlink tsconfig documentation
- Link to v17: https://lore.kernel.org/r/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com
Changes in v17:
- Fix a documentation nit.
- Add a missing kernel_ethtool_tsinfo update from a new MAC driver.
- Link to v16: https://lore.kernel.org/r/20240705-feature_ptp_netnext-v16-0-5d7153914052@bootlin.com
Changes in v16:
- Add a new patch to separate tsinfo into a new tsconfig command to get
and set the hwtstamp config.
- Used call_rcu() instead of synchronize_rcu() to free the hwtstamp_provider
- Moved net core changes of patch 12 directly to patch 8.
- Link to v15: https://lore.kernel.org/r/20240612-feature_ptp_netnext-v15-0-b2a086257b63@bootlin.com
Changes in v15:
- Fix uninitialized ethtool_ts_info structure.
- Link to v14: https://lore.kernel.org/r/20240604-feature_ptp_netnext-v14-0-77b6f6efea40@bootlin.com
Changes in v14:
- Add back an EXPORT_SYMBOL() missing.
- Link to v13: https://lore.kernel.org/r/20240529-feature_ptp_netnext-v13-0-6eda4d40fa4f@bootlin.com
Changes in v13:
- Add PTP builtin code to fix build errors when building PTP as a module.
- Fix error spotted by smatch and sparse.
- Link to v12: https://lore.kernel.org/r/20240430-feature_ptp_netnext-v12-0-2c5f24b6a914@bootlin.com
Changes in v12:
- Add missing return description in the kdoc.
- Fix few nit.
- Link to v11: https://lore.kernel.org/r/20240422-feature_ptp_netnext-v11-0-f14441f2a1d8@bootlin.com
Changes in v11:
- Add netlink examples.
- Remove a change of my out of tree marvell_ptp patch in the patch series.
- Remove useless extern.
- Link to v10: https://lore.kernel.org/r/20240409-feature_ptp_netnext-v10-0-0fa2ea5c89a9@bootlin.com
Changes in v10:
- Move declarations to net/core/dev.h instead of netdevice.h
- Add netlink documentation.
- Add ETHTOOL_A_TSINFO_GHWTSTAMP netlink attributes instead of a bit in
ETHTOOL_A_TSINFO_TIMESTAMPING bitset.
- Send "Move from simple ida to xarray" patch standalone.
- Add tsinfo ntf command.
- Add rcu_lock protection mechanism to avoid memory leak.
- Fixed doc and kdoc issue.
- Link to v9: https://lore.kernel.org/r/20240226-feature_ptp_netnext-v9-0-455611549f21@bootlin.com
Changes in v9:
- Remove the RFC prefix.
- Correct few NIT fixes.
- Link to v8: https://lore.kernel.org/r/20240216-feature_ptp_netnext-v8-0-510f42f444fb@bootlin.com
Changes in v8:
- Drop the 6 first patch as they are now merged.
- Change the full implementation to not be based on the hwtstamp layer
(MAC/PHY) but on the hwtstamp provider which mean a ptp clock and a
phc qualifier.
- Made some patch to prepare the new implementation.
- Expand netlink tsinfo instead of a new ts command for new hwtstamp
configuration uAPI and for dumping tsinfo of specific hwtstamp provider.
- Link to v7: https://lore.kernel.org/r/20231114-feature_ptp_netnext-v7-0-472e77951e40@bootlin.com
Changes in v7:
- Fix a temporary build error.
- Link to v6: https://lore.kernel.org/r/20231019-feature_ptp_netnext-v6-0-71affc27b0e5@bootlin.com
Changes in v6:
- Few fixes from the reviews.
- Replace the allowlist to default_timestamp flag to know which phy is
using old API behavior.
- Rename the timestamping layer enum values.
- Move to a simple enum instead of the mix between enum and bitfield.
- Update ts_info and ts-set in software timestamping case.
Changes in v5:
- Update to ndo_hwstamp_get/set. This bring several new patches.
- Add few patches to make the glue.
- Convert macb to ndo_hwstamp_get/set.
- Add netlink specs description of new ethtool commands.
- Removed netdev notifier.
- Split the patches that expose the timestamping to userspace to separate
the core and ethtool development.
- Add description of software timestamping.
- Convert PHYs hwtstamp callback to use kernel_hwtstamp_config.
Changes in v4:
- Move on to ethtool netlink instead of ioctl.
- Add a netdev notifier to allow packet trapping by the MAC in case of PHY
time stamping.
- Add a PHY whitelist to not break the old PHY default time-stamping
preference API.
Changes in v3:
- Expose the PTP choice to ethtool instead of sysfs.
You can test it with the ethtool source on branch feature_ptp of:
https://github.com/kmaincent/ethtool
- Added a devicetree binding to select the preferred timestamp.
Changes in v2:
- Move selected_timestamping_layer variable of the concerned patch.
- Use sysfs_streq instead of strmcmp.
- Use the PHY timestamp only if available.
====================
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
