| Age | Commit message (Collapse) | Author |
|---|
|
MAC supports filtering unmatched unicast packets according to
the MAC address table. This patch adds the support for
unicast frame filtering.
To support automatic restoration of MAC entries
after reset, the driver saves a copy of MAC entries in the driver.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20241216040532.1566229-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
the driver requested three interrupts: "tx", "rx", "err".
The err interrupt is a summary interrupt. We distinguish
different errors based on the status register and mask.
With "cat /proc/interrupts | grep hibmcge",
we can't distinguish the detailed cause of the error,
so we added this file to debugfs.
the following effects are achieved:
[root@localhost sjj]# cat /sys/kernel/debug/hibmcge/0000\:83\:00.1/irq_info
RX : enabled: true , logged: false, count: 0
TX : enabled: true , logged: false, count: 0
MAC_MII_FIFO_ERR : enabled: false, logged: true , count: 0
MAC_PCS_RX_FIFO_ERR : enabled: false, logged: true , count: 0
MAC_PCS_TX_FIFO_ERR : enabled: false, logged: true , count: 0
MAC_APP_RX_FIFO_ERR : enabled: false, logged: true , count: 0
MAC_APP_TX_FIFO_ERR : enabled: false, logged: true , count: 0
SRAM_PARITY_ERR : enabled: true , logged: true , count: 0
TX_AHB_ERR : enabled: true , logged: true , count: 0
RX_BUF_AVL : enabled: true , logged: false, count: 0
REL_BUF_ERR : enabled: true , logged: true , count: 0
TXCFG_AVL : enabled: true , logged: false, count: 0
TX_DROP : enabled: true , logged: false, count: 0
RX_DROP : enabled: true , logged: false, count: 0
RX_AHB_ERR : enabled: true , logged: true , count: 0
MAC_FIFO_ERR : enabled: true , logged: false, count: 0
RBREQ_ERR : enabled: true , logged: false, count: 0
WE_ERR : enabled: true , logged: false, count: 0
The irq framework of hibmcge driver also includes tx/rx interrupts.
Therefore, TX and RX are not moved separately form this file.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216040532.1566229-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch initializes debugfs and creates root directory
for each device. The tx_ring and rx_ring debugfs files
are implemented together.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216040532.1566229-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Oleksij Rempel says:
====================
lan78xx: Preparations for PHYlink
This patch set is a third part of the preparatory work for migrating
the lan78xx USB Ethernet driver to the PHYlink framework. During
extensive testing, I observed that resetting the USB adapter can lead to
various read/write errors. While the errors themselves are acceptable,
they generate excessive log messages, resulting in significant log spam.
This set improves error handling to reduce logging noise by addressing
errors directly and returning early when necessary.
====================
Link: https://patch.msgid.link/20241216120941.1690908-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enhance error handling in Wake-on-LAN (WoL) operations:
- Log a warning in `lan78xx_get_wol` if `lan78xx_read_reg` fails.
- Check and handle errors from `device_set_wakeup_enable` and
`phy_ethtool_set_wol` in `lan78xx_set_wol`.
- Ensure proper cleanup with a unified error handling path.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241216120941.1690908-7-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove PHY register handling from `lan78xx_get_regs` and
`lan78xx_get_regs_len`. Since the controller can have different PHYs
attached, the first 32 registers are not universally relevant or the
most interesting. Simplify the implementation to focus on MAC and device
registers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241216120941.1690908-6-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename `phy_mutex` to `mdiobus_mutex` for clarity, as the mutex protects
MDIO bus access rather than PHY-specific operations. Update all
references to ensure consistency.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241216120941.1690908-5-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename the generic `done` label to the action-specific `exit_unlock`
label in `lan78xx_mac_reset`. This improves clarity by indicating the
specific cleanup action (mutex unlock) and aligns with best practices
for error handling and cleanup labels.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20241216120941.1690908-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update lan78xx_stop_hw to return -ETIMEDOUT instead of -ETIME when
a timeout occurs. While -ETIME indicates a general timer expiration,
-ETIMEDOUT is more commonly used for signaling operation timeouts and
provides better consistency with standard error handling in the driver.
The -ETIME checks in tx_complete() and rx_complete() are unrelated to
this error handling change. In these functions, the error values are derived
from urb->status, which reflects USB transfer errors. The error value from
lan78xx_stop_hw will be exposed in the following cases:
- usb_driver::suspend
- net_device_ops::ndo_stop (potentially, though currently the return value
is not used).
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20241216120941.1690908-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update `lan78xx_get_regs` to handle errors during register and PHY
reads. Log warnings for failed reads and exit the function early if an
error occurs. Drop all previously logged registers to signal
inconsistent readings to the user space. This ensures that invalid data
is not returned to users.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241216120941.1690908-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are close to removing page->index. Use page->private instead, which
is least likely to be removed.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20241216155124.3114-1-willy@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Benefit from the recent conversion of the driver to NAPI and enable GRO
support through the use of napi_gro_receive(). Pass the NAPI pointer
from the bus driver (mlxsw_pci) to the switch driver (mlxsw_spectrum)
through the skb control block where various packet metadata is already
encoded.
The main motivation is to improve forwarding performance through the use
of GRO fraglist [1]. In my testing, when the forwarding data path is
simple (routing between two ports) there is not much difference in
forwarding performance between GRO disabled and GRO enabled with
fraglist.
The improvement becomes more noticeable as the data path becomes more
complex since it is traversed less times with GRO enabled. For example,
with 10 ingress and 10 egress flower filters with different priorities
on the two ports between which routing is performed, there is an
improvement of about 140% in forwarded bandwidth.
[1] https://lore.kernel.org/netdev/20200125102645.4782-1-steffen.klassert@secunet.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/21258fe55f608ccf1ee2783a5a4534220af28903.1734354812.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
inetpeer: reduce false sharing and atomic operations
After commit 8c2bd38b95f7 ("icmp: change the order of rate limits"),
there is a risk that a host receiving packets from an unique
source targeting closed ports is using a common inet_peer structure
from many cpus.
All these cpus have to acquire/release a refcount and update
the inet_peer timestamp (p->dtime)
Switch to pure RCU to avoid changing the refcount, and update
p->dtime only once per jiffy.
Tested:
DUT : 128 cores, 32 hw rx queues.
receiving 8,400,000 UDP packets per second, targeting closed ports.
Before the series:
- napi poll can not keep up, NIC drops 1,200,000 packets
per second.
- We use 20 % of cpu cycles
After this series:
- All packets are received (no more hw drops)
- We use 12 % of cpu cycles.
v1: https://lore.kernel.org/20241213130212.1783302-1-edumazet@google.com
====================
Link: https://patch.msgid.link/20241215175629.1248773-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All inet_getpeer() callers except ip4_frag_init() don't need
to acquire a permanent refcount on the inetpeer.
They can switch to full RCU protection.
Move the refcount_inc_not_zero() into ip4_frag_init(),
so that all the other callers no longer have to
perform a pair of expensive atomic operations on
a possibly contended cache line.
inet_putpeer() no longer needs to be exported.
After this patch, my DUT can receive 8,400,000 UDP packets
per second targeting closed ports, using 50% less cpu cycles
than before.
Also change two calls to l3mdev_master_ifindex() by
l3mdev_master_ifindex_rcu() (Ido ideas)
Fixes: 8c2bd38b95f7 ("icmp: change the order of rate limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet_putpeer() will be removed in the following patch,
because we will no longer use refcounts.
Update inetpeer timestamp (p->dtime) at lookup time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers of inet_getpeer() want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers of inet_getpeer_v4() and inet_getpeer_v6()
want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Thomas Weißschuh says:
====================
net: constify 'struct bin_attribute'
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
====================
Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-0-ec460b91f274@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-4-ec460b91f274@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-2-ec460b91f274@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-1-ec460b91f274@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Xiao Liang reported that the cited commit changed netns handling
in newlink() of netkit, veth, and vxcan.
Before the patch, if we don't find a netns attribute in the peer
device attributes, we tried to find another netns attribute in
the outer netlink attributes by passing it to rtnl_link_get_net().
Let's restore the original behaviour.
Fixes: 48327566769a ("rtnetlink: fix double call of rtnl_link_get_net_ifla()")
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCORBVVU8P6AHcEkENMj+gD2d3ce9t=A_o48E0yOQp8_wUQ@mail.gmail.com/#t
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Xiao Liang <shaw.leon@gmail.com>
Link: https://patch.msgid.link/20241216110432.51488-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nsim_pp_hold_write() has two problems:
1) It may return with rtnl held, as found by syzbot.
2) Its return value does not propagate an error if any.
Fixes: 1580cbcbfe77 ("net: netdevsim: add some fake page pool use")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216083703.1859921-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
page_pool_is_last_ref() releases a reference while the name,
to me at least, suggests it just checks if the refcount is 1.
The semantics of the function are the same as those of
atomic_dec_and_test() and refcount_dec_and_test(), so just
use the _and_test() suffix.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20241215212938.99210-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Hexagon-specific constant extender optimization in LLVM may crash on
Linux kernel code [1], such as fs/bcache/btree_io.c after
commit 32ed4a620c54 ("bcachefs: Btree path tracepoints") in 6.12:
clang: llvm/lib/Target/Hexagon/HexagonConstExtenders.cpp:745: bool (anonymous namespace)::HexagonConstExtenders::ExtRoot::operator<(const HCE::ExtRoot &) const: Assertion `ThisB->getParent() == OtherB->getParent()' failed.
Stack dump:
0. Program arguments: clang --target=hexagon-linux-musl ... fs/bcachefs/btree_io.c
1. <eof> parser at end of file
2. Code generation
3. Running pass 'Function Pass Manager' on module 'fs/bcachefs/btree_io.c'.
4. Running pass 'Hexagon constant-extender optimization' on function '@__btree_node_lock_nopath'
Without assertions enabled, there is just a hang during compilation.
This has been resolved in LLVM main (20.0.0) [2] and backported to LLVM
19.1.0 but the kernel supports LLVM 13.0.1 and newer, so disable the
constant expander optimization using the '-mllvm' option when using a
toolchain that is not fixed.
Cc: stable@vger.kernel.org
Link: https://github.com/llvm/llvm-project/issues/99714 [1]
Link: https://github.com/llvm/llvm-project/commit/68df06a0b2998765cb0a41353fcf0919bbf57ddb [2]
Link: https://github.com/llvm/llvm-project/commit/2ab8d93061581edad3501561722ebd5632d73892 [3]
Reviewed-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a race condition between exiting wb_on_itr and completion write
backs. For example, we are in wb_on_itr mode and a Tx completion is
generated by HW, ready to be written back, as we are re-enabling
interrupts:
HW SW
| |
| | idpf_tx_splitq_clean_all
| | napi_complete_done
| |
| tx_completion_wb | idpf_vport_intr_update_itr_ena_irq
That tx_completion_wb happens before the vector is fully re-enabled.
Continuing with this example, it is a UDP stream and the
tx_completion_wb is the last one in the flow (there are no rx packets).
Because the HW generated the completion before the interrupt is fully
enabled, the HW will not fire the interrupt once the timer expires and
the write back will not happen. NAPI poll won't be called. We have
indicated we're back in interrupt mode but nothing else will trigger the
interrupt. Therefore, the completion goes unprocessed, triggering a Tx
timeout.
To mitigate this, fire a SW triggered interrupt upon exiting wb_on_itr.
This interrupt will catch the rogue completion and avoid the timeout.
Add logic to set the appropriate bits in the vector's dyn_ctl register.
Fixes: 9c4a27da0ecc ("idpf: enable WB_ON_ITR")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
SW triggered interrupts are guaranteed to fire after their timer
expires, unlike Tx and Rx interrupts which will only fire after the
timer expires _and_ a descriptor write back is available to be processed
by the driver.
Add the necessary fields, defines, and initializations to enable a SW
triggered interrupt in the vector's dyn_ctl register.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add a devlink health reporter for MDD events. The 'dump' handler will
return the information captured in each call to ice_handle_mdd_event().
A device reset (CORER/PFR) will put the reporter back in healthy state.
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Co-developed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add Tx hang devlink health reporter, see struct ice_tx_hang_event to see
what exactly is reported. For now dump descriptors with little metadata
and skb diagnostic information.
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
[BUG]
There is a bug report in the mailing list where btrfs_run_delayed_refs()
failed to drop the ref count for logical 25870311358464 num_bytes
2113536.
The involved leaf dump looks like this:
item 166 key (25870311358464 168 2113536) itemoff 10091 itemsize 50
extent refs 1 gen 84178 flags 1
ref#0: shared data backref parent 32399126528000 count 0 <<<
ref#1: shared data backref parent 31808973717504 count 1
Notice the count number is 0.
[CAUSE]
There is no concrete evidence yet, but considering 0 -> 1 is also a
single bit flipped, it's possible that hardware memory bitflip is
involved, causing the on-disk extent tree to be corrupted.
[FIX]
To prevent us reading such corrupted extent item, or writing such
damaged extent item back to disk, enhance the handling of
BTRFS_EXTENT_DATA_REF_KEY and BTRFS_SHARED_DATA_REF_KEY keys for both
inlined and key items, to detect such 0 ref count and reject them.
CC: stable@vger.kernel.org # 5.4+
Link: https://lore.kernel.org/linux-btrfs/7c69dd49-c346-4806-86e7-e6f863a66f48@app.fastmail.com/
Reported-by: Frankie Fisher <frankie@terrorise.me.uk>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Btrfs like other file systems can't really deal with I/O not aligned to
it's internal block size (which strangely is called sector size in
btrfs, for historical reasons), but the block layer split helper doesn't
even know about that.
Round down the split boundary so that all I/Os are aligned.
Fixes: d5e4377d5051 ("btrfs: split zone append bios in btrfs_submit_bio")
CC: stable@vger.kernel.org # 6.12
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Otherwise it won't catch bios turned into regular writes by the block
level zone write plugging. The additional test it adds is for emulated
zone append.
Fixes: 9b1ce7f0c6f8 ("block: Implement zone append emulation")
CC: stable@vger.kernel.org # 6.12
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have been using the following check
if (generation <= root->root_key.offset)
to make decisions about whether or not to visit a node during snapshot
delete. This is because for normal subvolumes this is set to 0, and for
snapshots it's set to the creation generation. The idea being that if
the generation of the node is less than or equal to our creation
generation then we don't need to visit that node, because it doesn't
belong to us, we can simply drop our reference and move on.
However reloc roots don't have their generation stored in
root->root_key.offset, instead that is the objectid of their
corresponding fs root. This means we can incorrectly not walk into
nodes that need to be dropped when deleting a reloc root.
There are a variety of consequences to making the wrong choice in two
distinct areas.
visit_node_for_delete()
1. False positive. We think we are newer than the block when we really
aren't. We don't visit the node and drop our reference to the node
and carry on. This would result in leaked space.
2. False negative. We do decide to walk down into a block that we
should have just dropped our reference to. However this means that
the child node will have refs > 1, so we will switch to
UPDATE_BACKREF, and then the subsequent walk_down_proc() will notice
that btrfs_header_owner(node) != root->root_key.objectid and it'll
break out of the loop, and then walk_up_proc() will drop our reference,
so this appears to be ok.
do_walk_down()
1. False positive. We are in UPDATE_BACKREF and incorrectly decide that
we are done and don't need to update the backref for our lower nodes.
This is another case that simply won't happen with relocation, as we
only have to do UPDATE_BACKREF if the node below us was shared and
didn't have FULL_BACKREF set, and since we don't own that node
because we're a reloc root we actually won't end up in this case.
2. False negative. Again this is tricky because as described above, we
simply wouldn't be here from relocation, because we don't own any of
the nodes because we never set btrfs_header_owner() to the reloc root
objectid, and we always use FULL_BACKREF, we never actually need to
set FULL_BACKREF on any children.
Having spent a lot of time stressing relocation/snapshot delete recently
I've not seen this pop in practice. But this is objectively incorrect,
so fix this to get the correct starting generation based on the root
we're dropping to keep me from thinking there's a problem here.
CC: stable@vger.kernel.org
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Drop "devlink_" prefix from files that sit in devlink/.
I'm going to add more files there, and repeating "devlink" does not feel
good. This is also the scheme used in most other places, most notably the
devlink core files are named like that.
devlink.[ch] stays as is.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add devlink_fmsg_dump_skb() function that adds some diagnostic
information about skb (like length, pkt type, MAC, etc) to devlink
fmsg mechanism using bunch of devlink_fmsg_put() function calls.
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add devlink_fmsg_put() that dispatches based on the type
of the value to put, example: bool -> devlink_fmsg_bool_pair_put().
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Improve CamelCase recognition logic to avoid reporting on
_Generic() use.
Other C keywords, such as _Bool, are intentionally omitted, as those
should be rather avoided in new source code.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fixes from Steven Rostedt:
- Always try to initialize the idle functions when graph tracer starts
A bug was found that when a CPU is offline when graph tracing starts
and then comes online, that CPU is not traced. The fix to that was to
move the initialization of the idle shadow stack over to the hot plug
online logic, which also handle onlined CPUs. The issue was that it
removed the initialization of the shadow stack when graph tracing
starts, but the callbacks to the hot plug logic do nothing if graph
tracing isn't currently running. Although that fix fixed the onlining
of a CPU during tracing, it broke the CPUs that were already online.
- Have microblaze not try to get the "true parent" in function tracing
If function tracing and graph tracing are both enabled at the same
time the parent of the functions traced by the function tracer may
sometimes be the graph tracing trampoline. The graph tracing hijacks
the return pointer of the function to trace it, but that can
interfere with the function tracing parent output.
This was fixed by using the ftrace_graph_ret_addr() function passing
in the kernel stack pointer using the ftrace_regs_get_stack_pointer()
function. But Al Viro reported that Microblaze does not implement the
kernel_stack_pointer(regs) helper function that
ftrace_regs_get_stack_pointer() uses and fails to compile when
function graph tracing is enabled.
It was first thought that this was a microblaze issue, but the real
cause is that this only works when an architecture implements
HAVE_DYNAMIC_FTRACE_WITH_ARGS, as a requirement for that config is to
have ftrace always pass a valid ftrace_regs to the callbacks. That
also means that the architecture supports
ftrace_regs_get_stack_pointer()
Microblaze does not set HAVE_DYNAMIC_FTRACE_WITH_ARGS nor does it
implement ftrace_regs_get_stack_pointer() which caused it to fail to
build. Only implement the "true parent" logic if an architecture has
that config set"
* tag 'ftrace-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Do not find "true_parent" if HAVE_DYNAMIC_FTRACE_WITH_ARGS is not set
fgraph: Still initialize idle shadow stacks when starting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix DirectMap accounting in /proc/meminfo file
- Fix strscpy() return code handling that led to "unsigned 'len' is
never less than zero" warning
- Fix the calculation determining whether to use three- or four-level
paging: account KMSAN modules metadata
* tag 's390-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Consider KMSAN modules metadata for paging levels
s390/ipl: Fix never less than zero warning
s390/mm: Fix DirectMap accounting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"The first one fixes a syzbot UAF report caused by a commit introduced
in this cycle, but it also addresses a longstanding memory leak. The
second one resolves a PSI memstall mis-accounting issue.
The remaining patches switch file-backed mounts to use buffered I/Os
by default instead of direct I/Os, since the page cache of underlay
files is typically valid and maybe even dirty. This change also aligns
with the default policy of loopback devices. A mount option has been
added to try to use direct I/Os explicitly.
Summary:
- Fix (pcluster) memory leak and (sbi) UAF after umounting
- Fix a case of PSI memstall mis-accounting
- Use buffered I/Os by default for file-backed mounts"
* tag 'erofs-for-6.13-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: use buffered I/O for file-backed mounts by default
erofs: reference `struct erofs_device_info` for erofs_map_dev
erofs: use `struct erofs_device_info` for the primary device
erofs: add erofs_sb_free() helper
MAINTAINERS: erofs: update Yue Hu's email address
erofs: fix PSI memstall accounting
erofs: fix rare pcluster memory leak after unmounting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fix from Kees Cook:
"Silence a GCC value-range warning that is being ironically triggered
by bounds checking"
* tag 'hardening-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fortify: Hide run-time copy size from value range tracking
|
|
The TP_printk() portion of a trace event is executed at the time a event
is read from the trace. This can happen seconds, minutes, hours, days,
months, years possibly later since the event was recorded. If the print
format contains a dereference to a string via "%s", and that string was
allocated, there's a chance that string could be freed before it is read
by the trace file.
To protect against such bugs, there are two functions that verify the
event. The first one is test_event_printk(), which is called when the
event is created. It reads the TP_printk() format as well as its arguments
to make sure nothing may be dereferencing a pointer that was not copied
into the ring buffer along with the event. If it is, it will trigger a
WARN_ON().
For strings that use "%s", it is not so easy. The string may not reside in
the ring buffer but may still be valid. Strings that are static and part
of the kernel proper which will not be freed for the life of the running
system, are safe to dereference. But to know if it is a pointer to a
static string or to something on the heap can not be determined until the
event is triggered.
This brings us to the second function that tests for the bad dereferencing
of strings, trace_check_vprintf(). It would walk through the printf format
looking for "%s", and when it finds it, it would validate that the pointer
is safe to read. If not, it would produces a WARN_ON() as well and write
into the ring buffer "[UNSAFE-MEMORY]".
The problem with this is how it used va_list to have vsnprintf() handle
all the cases that it didn't need to check. Instead of re-implementing
vsnprintf(), it would make a copy of the format up to the %s part, and
call vsnprintf() with the current va_list ap variable, where the ap would
then be ready to point at the string in question.
For architectures that passed va_list by reference this was possible. For
architectures that passed it by copy it was not. A test_can_verify()
function was used to differentiate between the two, and if it wasn't
possible, it would disable it.
Even for architectures where this was feasible, it was a stretch to rely
on such a method that is undocumented, and could cause issues later on
with new optimizations of the compiler.
Instead, the first function test_event_printk() was updated to look at
"%s" as well. If the "%s" argument is a pointer outside the event in the
ring buffer, it would find the field type of the event that is the problem
and mark the structure with a new flag called "needs_test". The event
itself will be marked by TRACE_EVENT_FL_TEST_STR to let it be known that
this event has a field that needs to be verified before the event can be
printed using the printf format.
When the event fields are created from the field type structure, the
fields would copy the field type's "needs_test" value.
Finally, before being printed, a new function ignore_event() is called
which will check if the event has the TEST_STR flag set (if not, it
returns false). If the flag is set, it then iterates through the events
fields looking for the ones that have the "needs_test" flag set.
Then it uses the offset field from the field structure to find the pointer
in the ring buffer event. It runs the tests to make sure that pointer is
safe to print and if not, it triggers the WARN_ON() and also adds to the
trace output that the event in question has an unsafe memory access.
The ignore_event() makes the trace_check_vprintf() obsolete so it is
removed.
Link: https://lore.kernel.org/all/CAHk-=wh3uOnqnZPpR0PeLZZtyWbZLboZ7cHLCKRWsocvs9Y7hQ@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20241217024720.848621576@goodmis.org
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The test_event_printk() code makes sure that when a trace event is
registered, any dereferenced pointers in from the event's TP_printk() are
pointing to content in the ring buffer. But currently it does not handle
"%s", as there's cases where the string pointer saved in the ring buffer
points to a static string in the kernel that will never be freed. As that
is a valid case, the pointer needs to be checked at runtime.
Currently the runtime check is done via trace_check_vprintf(), but to not
have to replicate everything in vsnprintf() it does some logic with the
va_list that may not be reliable across architectures. In order to get rid
of that logic, more work in the test_event_printk() needs to be done. Some
of the strings can be validated at this time when it is obvious the string
is valid because the string will be saved in the ring buffer content.
Do all the validation of strings in the ring buffer at boot in
test_event_printk(), and make sure that the field of the strings that
point into the kernel are accessible. This will allow adding checks at
runtime that will validate the fields themselves and not rely on paring
the TP_printk() format at runtime.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20241217024720.685917008@goodmis.org
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The process_pointer() helper function looks to see if various trace event
macros are used. These macros are for storing data in the event. This
makes it safe to dereference as the dereference will then point into the
event on the ring buffer where the content of the data stays with the
event itself.
A few helper functions were missing. Those were:
__get_rel_dynamic_array()
__get_dynamic_array_len()
__get_rel_dynamic_array_len()
__get_rel_sockaddr()
Also add a helper function find_print_string() to not need to use a middle
man variable to test if the string exists.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20241217024720.521836792@goodmis.org
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The test_event_printk() analyzes print formats of trace events looking for
cases where it may dereference a pointer that is not in the ring buffer
which can possibly be a bug when the trace event is read from the ring
buffer and the content of that pointer no longer exists.
The function needs to accurately go from one print format argument to the
next. It handles quotes and parenthesis that may be included in an
argument. When it finds the start of the next argument, it uses a simple
"c = strstr(fmt + i, ',')" to find the end of that argument!
In order to include "%s" dereferencing, it needs to process the entire
content of the print format argument and not just the content of the first
',' it finds. As there may be content like:
({ const char *saved_ptr = trace_seq_buffer_ptr(p); static const char
*access_str[] = { "---", "--x", "w--", "w-x", "-u-", "-ux", "wu-", "wux"
}; union kvm_mmu_page_role role; role.word = REC->role;
trace_seq_printf(p, "sp gen %u gfn %llx l%u %u-byte q%u%s %s%s" " %snxe
%sad root %u %s%c", REC->mmu_valid_gen, REC->gfn, role.level,
role.has_4_byte_gpte ? 4 : 8, role.quadrant, role.direct ? " direct" : "",
access_str[role.access], role.invalid ? " invalid" : "", role.efer_nx ? ""
: "!", role.ad_disabled ? "!" : "", REC->root_count, REC->unsync ?
"unsync" : "sync", 0); saved_ptr; })
Which is an example of a full argument of an existing event. As the code
already handles finding the next print format argument, process the
argument at the end of it and not the start of it. This way it has both
the start of the argument as well as the end of it.
Add a helper function "process_pointer()" that will do the processing during
the loop as well as at the end. It also makes the code cleaner and easier
to read.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20241217024720.362271189@goodmis.org
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Fix xen netfront crash (XSA-465) and avoid using the hypercall page
that doesn't do speculation mitigations (XSA-466)"
* tag 'xsa465+xsa466-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove hypercall page
x86/xen: use new hypercall functions instead of hypercall page
x86/xen: add central hypercall functions
x86/xen: don't do PV iret hypercall through hypercall page
x86/static-call: provide a way to do very early static-call updates
objtool/x86: allow syscall instruction
x86: make get_cpu_vendor() accessible from Xen code
xen/netfront: fix crash when removing device
|
|
Coverity reports an uninit pointer read in qed_mcp_nvm_info_populate().
If EOPNOTSUPP is returned from qed_mcp_bist_nvm_get_num_images() ensure
nvm_info.num_images is set to 0 to avoid possible uninit assignment
to p_hwfn->nvm_info.image_att later on in out label.
Closes: https://scan5.scan.coverity.com/#/project-view/63204/10063?selectedIssue=1636666
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Gianfranco Trad <gianf.trad@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241215011733.351325-2-gianf.trad@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Similar to the use of $crate::Module, ThisModule should be referred to as
$crate::ThisModule in the macro evaluation. The reason the macro previously
did not cause any errors is because all the users of the macro would use
kernel::prelude::*, bringing ThisModule into scope.
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20241214194242.19505-1-sergeantsagara@protonmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that we have generic QDISC_CONGESTED and QDISC_OVERLIMIT drop
reasons, let's have all the qdiscs that contain an AQM apply them
consistently when dropping packets.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241214-fq-codel-drop-reasons-v1-1-2a814e884c37@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The OF node obtained by of_parse_phandle() is not freed. Call
of_node_put() to balance the refcount.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 1676aba5ef7e ("net: ethernet: bgmac: device tree phy enablement")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241214014912.2810315-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
