summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-10Merge branch 'pci/misc' into nextBjorn Helgaas
* pci/misc: PCI: Read capability list as dwords, not bytes PCI: Don't clear ASPM bits when the FADT declares it's unsupported PCI: Clarify policy for vendor IDs in pci.txt PCI/ACPI: Optimize device state transition delays PCI: Export pci_find_host_bridge() for use inside PCI core PCI: Make a shareable UUID for PCI firmware ACPI _DSM PCI: Fix typo in Thunderbolt kernel message
2015-04-10Merge branches 'pci/host-exynos', 'pci/host-iproc', 'pci/host-keystone', ↵Bjorn Helgaas
'pci/host-layerscape', 'pci/host-mvebu', 'pci/host-rcar' and 'pci/host-versatile' into next * pci/host-exynos: PCI: exynos: Fix INTx enablement statement termination error * pci/host-iproc: PCI: iproc: Add Broadcom iProc PCIe support PCI: iproc: Add DT docs for Broadcom iProc PCIe driver PCI: Export symbols required for loadable host driver modules * pci/host-keystone: PCI: keystone: Don't dereference possible NULL pointer * pci/host-layerscape: PCI: layerscape: Simplify platform_get_resource_byname() failure checking * pci/host-mvebu: PCI: mvebu: Add suspend/resume support * pci/host-rcar: PCI: rcar: Verify that mem_res is 64K-aligned PCI: rcar: Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR PCI: rcar: Write zeroes to reserved PCIEPARL bits PCI: rcar: Fix position of MSI enable bit * pci/host-versatile: PCI: versatile: Check for devm_ioremap_resource() failures
2015-04-10drivers/usb/core: devio.c: Removed an uneeded space before tabChase Metzger
Ran checkpatch.pl on file and removed a warning about an unwanted space before a tab. Signed-off-by: Chase Metzger <chasemetzger15@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-10usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resumeGregory Herrero
msleep(USB_RESUME_TIMEOUT) must be done when the controller drives the resume. This is true after HPRT0_RES is written. Moreover, restore the delay after controller power is up. Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-10Merge tag 'usb-ci-v4.1-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: Two Chipidea updates - Forbid dumpping registers when the controller in low power mode - dp pullup needs to be controlled by fsm when working at otg fsm mode
2015-04-10Merge tag 'for-4.1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: New Features ============ *) Add driver for USB PHYs on sun9i *) Add driver for USB PHY on dm816x *) Modified exynos5-usbdrd driver to add support for Exynos5433 SoC Fixes ===== *) Fix power_on/power_off failure paths in some drivers *) Make miphy365x use generic PHY type constants *) Fix build errors due to missing export symbols in qcom-ufs driver *) Make all the functions return proper error values Cleanups ======== *) use PTR_ERR_OR_ZERO to simplify code *) use devm_kcalloc instead of devm_kzalloc with multiply *) remove un-necessary ifdef CONFIG_OF
2015-04-10Merge tag 'usb-for-v4.1-part2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing Felipe writes: usb: generic resume timeout for v4.1 This part 2 pull request contains only the patches which make sure everybody on linux uses the same resume timeout value. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-10mmc: sdhci-st: Update ST SDHCI binding documentation.Peter Griffin
This patch updates the binding information to reflect the extra dt options which are now supported by the sdhci-st.c driver which enable support for stih407 family silicon. STiH410 SoC and later support UHS modes for eMMC, so the driver now makes use of these common bindings. Examples are provided for both eMMC (which has additional bindings) and also sd slot for STiH407. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Update the quirks for this controller.Peter Griffin
Some additional quirks need to be enabled now we support UHS modes. This avoids some spurious warnings like "Got data interrupt 0x00000002 even though no data operation was in progress" Testing on stih410-b2120 board achieves the following speeds with HS200 eMMC card. max-frequency = 200Mhz /dev/mmcblk0p1: Timing buffered disk reads: 270 MB in 3.02 seconds = 89.54 MB/sec max-frequency = 100Mhz root@debian-armhf:~# hdparm -t /dev/mmcblk0p1 /dev/mmcblk0p1: Timing buffered disk reads: 210 MB in 3.00 seconds = 70.00 MB/sec max-frequency = 50Mhz root@debian-armhf:~# hdparm -t /dev/mmcblk0p1 /dev/mmcblk0p1: Timing buffered disk reads: 118 MB in 3.00 seconds = 39.28 MB/sec This is better than the 3.10 kernel which achieves 77.59 MB/sec at 200Mhz clock (same board/soc/eMMC). Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function.Peter Griffin
To allow UHS modes to work properly we need to provide the st specific set_uhs_signaling callback function. This function differs from the generic sdhci_set_uhs_signaling callback in that we need to configure the correct delay depending on the UHS mode, and also set the V18_EN bit. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue registers.Peter Griffin
STiH407 family SoC's have glue registers in the flashSS subsystem which are used to configure the Arasan HC. This patch configures these glue registers according to what has been specified in the DT. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add delay management functions for top registers (eMMC).Peter Griffin
Due to the tight timing constraints in some UHS modes, it is required to have some delay management in the design. Two types of delay management are supported in the HW: - 1) Static delay management 2) Dynamic delay management NB: The delay management is only there when eMMC interface is selected. 1: Static delay management: is used to provide PVT dependent static delay on the clock/data lines to manage setup/hold requirements of the interface. The maximum delay possible is 3.25ns. These delays are PVT dependent, and thus delay values applied are not accurate and vary across provcess voltage and temperature range. Due to this these delays must not be used on the very time critical paths. 2. Dynamic delay locked loop (DLL): is used to provide dynamic delay management. The advantage of DLL is that it provides accurate & PVT indepedent delay. The DLL is used to provide delay on the loopback clock on "Read Path" to capture read data reliably. On TX path the clock on which output data is transmitted is delayed, resulting in delay of TX data. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add support for de-asserting reset signal and top regs resourcePeter Griffin
STiH407 family SoC's can have a reset signal for the controller which needs to be managed. Also the eMMC controller has some additional 'top' memory mapped registers which are used to manage the dynamic and static delay required for UHS modes. This patch adds support for creating the mapping, which will be used by subsequent patches. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add macros for register offsets and bitfields for mmcss glue regsPeter Griffin
The stih407 family SoC's have additional glue registers in the flashSS which are used to configure the Arasan controller. This patch adds macros for the register offsets and bitfields which will be used by subsequent patches to support stih407 family SoC's. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10x86/apic/uv: Update the UV APIC HUB checkMike Travis
Update the check for UV2000/3000. Note when the HUB is not recognized. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Hedi Berriche <hedi@sgi.com> Acked-by: Dimitri Sivanich <sivanich@sgi.com> Link: http://lkml.kernel.org/r/20150409182629.267239403@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-10x86/apic/uv: Update the UV APIC driver checkMike Travis
Fix a bug in the OEM check function that determines if the system is a UV system and the BIOS is compatible with the kernel's UV apic driver. This prevents some possibly obscure panics and guards the system against being started on SGI hardware that does not have the required kernel support. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Hedi Berriche <hedi@sgi.com> Acked-by: Dimitri Sivanich <sivanich@sgi.com> Link: http://lkml.kernel.org/r/20150409182629.112998930@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-10x86/apic/uv: Update the APIC UV OEM checkMike Travis
Optimize the first "SGI" OEM check to return faster if the system is not an SGI or UV system. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Hedi Berriche <hedi@sgi.com> Acked-by: Dimitri Sivanich <sivanich@sgi.com> Link: http://lkml.kernel.org/r/20150409182628.952357922@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-10md/raid0: fix bug with chunksize not a power of 2.NeilBrown
Since commit 20d0189b1012a37d2533a87fb451f7852f2418d1 in v3.14-rc1 RAID0 has performed incorrect calculations when the chunksize is not a power of 2. This happens because "sector_div()" modifies its first argument, but this wasn't taken into account in the patch. So restore that first arg before re-using the variable. Reported-by: Joe Landman <joe.landman@gmail.com> Reported-by: Dave Chinner <david@fromorbit.com> Fixes: 20d0189b1012a37d2533a87fb451f7852f2418d1 Cc: stable@vger.kernel.org (3.14 and later). Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-10nios2: fix cache coherency issue when debug with gdbLey Foon Tan
Remove the end address checking for flushda function. We need to flush each address line for flushda instruction, from start to end address. This is because flushda instruction only flush the cache if tag and line fields are matched. Change to use ldwio instruction (bypass cache) to load the instruction that causing trap. Our interest is the actual instruction that executed by the processor, this should be uncached. Note, EA address might be an userspace cached address. Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-04-09Merge tag 'pm+acpi-4.0-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are stable-candidate fixes of some recently reported issues in the cpufreq core, cpuidle core, the ACPI cpuidle driver and the hibernate core. Specifics: - Revert a 3.17 hibernate commit that was supposed to fix an issue related to e820 reserved regions, but broke resume from hibernation on Lenovo x230 (Rafael J Wysocki). - Prevent the ACPI cpuidle driver from overwriting the name and description of the C0 state set by the core when the list of C-states changes (Thomas Schlichter). - Remove the no longer needed state_count field from struct cpuidle_device which prevents the list of C-states shown by the sysfs interface from becoming incorrect when the current number of them is different from the number of C-states on boot (Bartlomiej Zolnierkiewicz). - The cpufreq core updates the policy object of the only online CPU during system resume to make it reflect the current hardware state, but it always assumes that CPU to be CPU0 which need not be the case, so fix the code to avoid that assumption (Viresh Kumar)" * tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions" cpuidle: ACPI: do not overwrite name and description of C0 cpuidle: remove state_count field from struct cpuidle_device cpufreq: Schedule work for the first-online CPU on resume
2015-04-09PCI: Read capability list as dwords, not bytesSean O. Stalley
Reading both the capability ID and "next" pointer at the same time lets us parse the list with half the number of config reads. Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09Merge branches 'pm-sleep', 'pm-cpufreq' and 'pm-cpuidle'Rafael J. Wysocki
* pm-sleep: Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions" * pm-cpufreq: cpufreq: Schedule work for the first-online CPU on resume * pm-cpuidle: cpuidle: ACPI: do not overwrite name and description of C0 cpuidle: remove state_count field from struct cpuidle_device
2015-04-09PCI: layerscape: Simplify platform_get_resource_byname() failure checkingBjorn Helgaas
devm_ioremap_resource() validates the resource it receives, so if we check for devm_ioremap_resource() failure, we need not check for failure of the preceding platform_get_resource(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09PCI: keystone: Don't dereference possible NULL pointerBjorn Helgaas
Check for failure from platform_get_resource() (this check actually happens inside devm_ioremap_resource()) before dereferencing the pointer returned from platform_get_resource(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09PCI: versatile: Check for devm_ioremap_resource() failuresJisheng Zhang
Check for failure of devm_ioremap_resource(). devm_ioremap_resource() validates the resource it receives, so if we check for devm_ioremap_resource() failure, we need not check for failure of the preceding platform_get_resource(). [bhelgaas: changelog] Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09PCI: Don't clear ASPM bits when the FADT declares it's unsupportedMatthew Garrett
Communications with a hardware vendor confirm that the expected behaviour on systems that set the FADT ASPM disable bit but which still grant full PCIe control is for the OS to leave any BIOS configuration intact and refuse to touch the ASPM bits. This mimics the behaviour of Windows. Signed-off-by: Matthew Garrett <mjg59@coreos.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09PCI: Clarify policy for vendor IDs in pci.txtMichael S. Tsirkin
Clarify pci.txt so it matches the "do not add new entries unless they are shared between multiple drivers" comment in include/linux/pci_ids.h. [bhelgaas: changelog, strengthen language] Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09Merge tag 'pci-v4.0-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Here are some fixes for v4.0. I apologize for how late they are. We were hoping for some better fixes, but couldn't get them polished in time. These fix: - a Xen domU oops with PCI passthrough devices - a sparc T5 boot failure - a STM SPEAr13xx crash (use after initdata freed) - a cpcihp hotplug driver thinko - an AER thinko that printed stack junk Details: Enumeration - Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas) Resource management - Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas) AER - Avoid info leak in __print_tlp_header() (Rasmus Villemoes) PCI device hotplug - Add missing curly braces in cpci_configure_slot() (Dan Carpenter) ST Microelectronics SPEAr13xx host bridge driver - Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov) * tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" PCI: Don't look for ACPI hotplug parameters if ACPI is disabled PCI: cpcihp: Add missing curly braces in cpci_configure_slot() PCI/AER: Avoid info leak in __print_tlp_header() PCI: spear: Drop __initdata from spear13xx_pcie_driver
2015-04-09ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob supportDmitry M. Fedin
Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3237" Signed-off-by: Dmitry M. Fedin <dmitry.fedin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-09hwmon: (it87) Use feature macros on sio_dataGuenter Roeck
Feature macros work on sio_data as well, so use them there. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-09ocfs2: _really_ sync the right rangeAl Viro
"ocfs2 syncs the wrong range" had been broken; prior to it the code was doing the wrong thing in case of O_APPEND, all right, but _after_ it we were syncing the wrong range in 100% cases. *ppos, aka iocb->ki_pos is incremented prior to that point, so we are always doing sync on the area _after_ the one we'd written to. Spotted by Joseph Qi <joseph.qi@huawei.com> back in January; unfortunately, I'd missed his mail back then ;-/ Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-09nios2: add missing ptrace registers definesLey Foon Tan
These are all register available in nios2. Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-04-09x86/iommu: Fix header comments regarding standard and _FINISH macrosAravind Gopalakrishnan
The comment line regarding IOMMU_INIT and IOMMU_INIT_FINISH macros is incorrect: "The standard vs the _FINISH differs in that the _FINISH variant will continue detecting other IOMMUs in the call list..." It should be "..the *standard* variant will continue detecting..." Fix that. Also, make it readable while at it. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: konrad.wilk@oracle.com Fixes: 6e9636693373 ("x86, iommu: Update header comments with appropriate naming") Link: http://lkml.kernel.org/r/1428508017-5316-1-git-send-email-Aravind.Gopalakrishnan@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-09x86/asm/entry/64: Reduce padding in execve stubsDenys Vlasenko
execve stubs are 7 bytes only. Padding them to 16 bytes is a waste. text data bss dec hex filename 12594 0 0 12594 3132 entry_64.o.before 12530 0 0 12530 30f2 entry_64.o Run-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-8-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-09x86/asm/entry/64: Remove GET_THREAD_INFO() in ret_from_forkDenys Vlasenko
It used to be used to check for _TIF_IA32, but the check has been removed. Remove GET_THREAD_INFO() too. Run-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-7-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-09x86/asm/entry/64: Simplify jumps in ret_from_forkDenys Vlasenko
Replace test jz 1f jmp label 1: with test jnz label Run-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-6-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-09x86/asm/entry/64: Remove a redundant jumpDenys Vlasenko
Jumping to the very next instruction is not very useful: jmp label label: Removing the jump. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-5-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-09x86/asm/entry/64: Optimize [v]fork/clone stubsDenys Vlasenko
Replace "call func; ret" with "jmp func". Run-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-4-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-09x86/asm/entry: Zero EXTRA_REGS for stub32_execve() tooDenys Vlasenko
The change which affected how execve clears EXTRA_REGS missed 32-bit execve syscalls. Fix this by using 64-bit execve stub epilogue for them too. Run-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-09x86/asm/entry/64: Move stub_x32_execvecloser() to stub_execveat()Denys Vlasenko
This is a preparatory patch for moving stub32_execve[at]() to this file. It makes sense to have all execve stubs in one place, so that they can reuse code. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-09x86/asm/entry/64: Use common code for rt_sigreturn() epilogueDenys Vlasenko
Similarly to stub_execve, we can reuse the epilogue in stub_rt_sigreturn() and stub_x32_rt_sigreturn(). Add a comment explaining why we can't eliminage SAVE_EXTRA_REGS here. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-09powerpc, jump_label: Include linux/jump_label.h to get HAVE_JUMP_LABEL defineAnton Blanchard
Commit 1bc9e47aa8e4 ("powerpc/jump_label: Use HAVE_JUMP_LABEL") converted uses of CONFIG_JUMP_LABEL to HAVE_JUMP_LABEL in some assembly files. HAVE_JUMP_LABEL is defined in linux/jump_label.h, so we need to include this or we always get the non jump label fallback code. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: benh@kernel.crashing.org Cc: catalin.marinas@arm.com Cc: davem@davemloft.net Cc: heiko.carstens@de.ibm.com Cc: jbaron@akamai.com Cc: linux@arm.linux.org.uk Cc: linuxppc-dev@lists.ozlabs.org Cc: liuj97@gmail.com Cc: mgorman@suse.de Cc: mmarek@suse.cz Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: rostedt@goodmis.org Cc: schwidefsky@de.ibm.com Cc: will.deacon@arm.com Fixes: 1bc9e47aa8e4 ("powerpc/jump_label: Use HAVE_JUMP_LABEL") Link: http://lkml.kernel.org/r/1428551492-21977-3-git-send-email-anton@samba.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-09jump_label: Allow jump labels to be used in assemblyAnton Blanchard
To use jump labels in assembly we need the HAVE_JUMP_LABEL define, so we select a fallback version if the toolchain does not support them. Modify linux/jump_label.h so it can be included by assembly files. We also need to add -DCC_HAVE_ASM_GOTO to KBUILD_AFLAGS. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: benh@kernel.crashing.org Cc: catalin.marinas@arm.com Cc: davem@davemloft.net Cc: heiko.carstens@de.ibm.com Cc: jbaron@akamai.com Cc: linux@arm.linux.org.uk Cc: linuxppc-dev@lists.ozlabs.org Cc: liuj97@gmail.com Cc: mgorman@suse.de Cc: mmarek@suse.cz Cc: mpe@ellerman.id.au Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: rostedt@goodmis.org Cc: schwidefsky@de.ibm.com Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1428551492-21977-2-git-send-email-anton@samba.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-09jump_label: Allow asm/jump_label.h to be included in assemblyAnton Blanchard
Wrap asm/jump_label.h for all archs with #ifndef __ASSEMBLY__. Since these are kernel only headers, we don't need #ifdef __KERNEL__ so can simplify things a bit. If an architecture wants to use jump labels in assembly, it will still need to define a macro to create the __jump_table entries (see ARCH_STATIC_BRANCH in the powerpc asm/jump_label.h for an example). Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: benh@kernel.crashing.org Cc: catalin.marinas@arm.com Cc: davem@davemloft.net Cc: heiko.carstens@de.ibm.com Cc: jbaron@akamai.com Cc: linux@arm.linux.org.uk Cc: linuxppc-dev@lists.ozlabs.org Cc: liuj97@gmail.com Cc: mgorman@suse.de Cc: mmarek@suse.cz Cc: mpe@ellerman.id.au Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: rostedt@goodmis.org Cc: schwidefsky@de.ibm.com Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1428551492-21977-1-git-send-email-anton@samba.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-09mmc: sdhci-esdhc-imx: Call mmc_of_parse()Fabio Estevam
Currently it is not possible to use 'mmc-pwrseq-simple' property with this driver because mmc_of_parse() is never called. mmc_of_parse() calls mmc_pwrseq_alloc() that manages MMC power sequence and allows passing GPIOs in the devicetree to properly power/reset the Wifi chipset. When using mmc_of_parse() we no longer need to have custom code to request card-detect and write-protect pins, as this can now be handled by the mmc core. Tested on a imx6sl-warp board where BT/Wifi is functional and also on a imx6q-sabresd. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-09mmc: dw_mmc: Add locking around cmd11 timerDoug Anderson
It is possible for the cmd11 interrupt to fire and delete the cmd11_timer before the cmd11_timer was actually setup. Let's fix this race by adding a few spinlocks. Note that the race wasn't seen in practice without adding some printk statements, but it still seems wise to fix. Fixes: 5c935165da79 ("mmc: dw_mmc: Add a timeout for sending CMD11") Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-09mmc: dw_mmc: Add a return in an unexpected cmd11 timeoutDoug Anderson
If we get an unexpected cmd11 timeout we shouldn't actually treat it as a timeout (not that we really expect to get an unexpected cmd11 timeout, but still). Fixes: 5c935165da79 ("mmc: dw_mmc: Add a timeout for sending CMD11") Reported-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-09mmc: dw_mmc: Increase cmd11 timeout to 500msDoug Anderson
Although the cmd11 interrupt should come within 2ms, that's a very short time. Let's increase the timeout to be really sure that we don't get an accidnetal timeout. One case in particular this is useful is if you've got a serial console and printk in just the right places. Under that scenario I've seen delays of up to 130ms before the interrupt fired. CMD11 is only sent during card insertion, so this extra timeout shouldn't be terrible. Fixes: 5c935165da79 ("mmc: dw_mmc: Add a timeout for sending CMD11") Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-09mmc: dw_mmc: fix fifo ordering in big endianBen Dooks
The dw_mmc driver changes to make the IO accesors endian agnostic did not take into account the fifo accesses do not need to be swapped. To fix this add a mmci_fifo_read/write wrapper to allow these to be passed through the IO without being swapped. Since these are now specific functions, it would be easier just to store the pointer to the fifo registers in the host block instead of the offset to them. So change the host->data_offset to host->fifo_reg (which also means we catch all the places this is read or written). Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-09mmc: dw_mmc: change idmac descriptor files to __le32Ben Dooks
The dw_mmc driver does not take into account the processor may be in big endian when writing the descriptors. Change the descriptors for the 32bit IDMA to use __le32 and ensure they are suitably swapped before writing. Note, this has not been tested as the socfpga driver does not try to use idma. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 02:43:45 +0000