| Age | Commit message (Collapse) | Author |
|---|
|
'asoc/topic/amd', 'asoc/topic/atmel' and 'asoc/topic/au1x' into asoc-next
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
asoc-linus
|
|
|
|
|
|
|
|
The soc_compr_copy callback is currently broken. Since the
changes to move the compr_ops over to the component the return
value is not correctly propagated, always returning zero on
success rather than the number of bytes copied. This causes
user-space to stall continuously reading as it does not believe
it has received any data.
Furthermore, the changes to move the compr_ops over to the
component iterate through the list of components and will call
the copy callback for any that have compressed ops. There isn't
currently any consensus on the mechanism to combine the results
of multiple copy callbacks.
To fix this issue for now halt searching the component list when
we locate a copy callback and return the result of that single
callback. Additional work should probably be done to look at the
other ops, tidy things up, and work out if we want to support
multiple components on a single compressed, but this is the only
fix required to get things working again.
Fixes: 9e7e3738ab0e ("ASoC: snd_soc_component_driver has snd_compr_ops")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
rt5663 needs mclk/sclk early to synchronize its internal clocks. Enable
these clocks early.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Extended I2S config blob supports multiple mclk dividers in NHLT blob.
This patch detects whether the I2S blob is legacy or extended based on the
signature value and chooses the mclk source and divider accordingly.
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For certain platforms, it is required to start the clocks (mclk/sclk/fs)
before the stream start. Example: for few chrome systems, codec needs the
mclk/sclk to be enabled early for a successful clock synchronization and
for few IVI platforms, clock need to be enabled at boot and should be ON
always.
Add the required structures and create set_dma_control ipc to enable or
disable the clock. To enable sclk without fs, mclk ipc structure is used,
else sclkfs ipc structure is used.
Clock prepare/unprepare are used to enable/disable the clock as the IPC
will be sent in non-atomic context. The clk set_dma_control IPC
structures are populated during the set_rate callback and IPC is sent
to enable the clock during prepare callback.
This patch creates virtual clock driver, which allows the machine driver
to use the clock interface to send IPCs to DSP to enable/disable the
clocks.
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 3bb0f7c31b1a ("ASoC: don't use snd_soc_write/read on twl4030")
caused regressions for both twl4030 and twl6040 as it assumes the
ASoC driver is using regmap. As a side effect, this also causes a
considerable increase in idle power consumption omap3 boards using
twl4030 as the PMIC.
This is because the removal of read and write function pointers
causes some of the ASoC IO functions to not do anything. For example,
snd_soc_register_card() calls snd_soc_dapm_new_widgets() that calls
snd_soc_codec_drv_read() that now does nothing.
A long term solution suggested by Mark Brown <broonie@kernel.org>
is to make the twl drivers use regmap by adding a call to
snd_soc_codec_set_regmap(). This however needs more consideration
as currently the driver internal reads do caching and we would have
both regmap access and internal read/write access accessing the same
hardware registers.
So to fix the regression, let's just do a partial revert adding back
the read and write function pointers. Note that other non-regmap
ASoC drivers may need similar patches.
Fixes: 3bb0f7c31b1a ("ASoC: don't use snd_soc_write/read on twl4030")
Fixes: 93a00c467fe9 ("ASoC: don't use snd_soc_write/read on twl6040")
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-twl-breakage
|
|
The rt5514 dsp captures pcm data through spi directly, so we should not
use rockchip-i2s as it's cpu dai like other codecs.
Use dummy_dai for rt5514 dsp dailink to make voice wakeup work again.
Reported-by: Jimmy Cheng-Yi Chiang <cychiang@google.com>
Fixes: (72cfb0f20c75 ASoC: rockchip: Use codec of_node and dai_name for rt5514 dsp)
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit fbb16563c6c2 ("ASoC: snd_soc_component_driver has pmdown_time")
added new .pmdown_time which is for inverted version of current
.ignore_pmdown_time
But it is confusable name. Let's rename it to .use_pmdown_time
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Power Down Release Command (PMVR, PMDAC, RSTN, PMDA1-PMDA6)
which are located on PW_MGMT1 / PW_MGMT3 register must be
write again after at least 5 LRCK cycle or later on each command.
Otherwise, Playback volume will be 0dB.
Basically, it should be
1. PowerDownRelease by Power Management1 <= call 1.x after 5LRCK
1.x Dummy write to Power Management1
2. PowerDownRelease by Power Management3 <= call 2.x after 5LRCK
2.x Dummy write to Power Management3
To avoid too many dummy write, this patch is merging these.
1. PowerDownRelease by Power Management1
2. PowerDownRelease by Power Management3 <= call after 5LRCK
2.x Dummy write to Power Management1/3 <= merge dummy write
This patch adds dummy write when Playback Start timing.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_pcm_private_free()
commit f523acebbb74 ("ASoC: add Component level pcm_new/pcm_free v2")
added component level pcm_new/pcm_free, but flush_delayed_work()
on soc_pcm_private_free() is called in for_each_rtdcom() loop.
It doesn't need to be called many times.
This patch moves it out of loop.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_rtdcom_lookup() look up component by uisng driver name.
Then, it uses component->driver->name.
Some driver might doesn't have it, thus it should care NULL pointer.
This patch solve this issue.
Reported-by: Mukunda,Vijendar <vijendar.mukunda@amd.com>
Reported-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Mukunda,Vijendar <vijendar.mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 pti fixes from Thomas Gleixner:
"A small set of fixes for the meltdown/spectre mitigations:
- Make kprobes aware of retpolines to prevent probes in the retpoline
thunks.
- Make the machine check exception speculation protected. MCE used to
issue an indirect call directly from the ASM entry code. Convert
that to a direct call into a C-function and issue the indirect call
from there so the compiler can add the retpoline protection,
- Make the vmexit_fill_RSB() assembly less stupid
- Fix a typo in the PTI documentation"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Optimize inline assembler for vmexit_fill_RSB
x86/pti: Document fix wrong index
kprobes/x86: Disable optimizing on the function jumps to indirect thunk
kprobes/x86: Blacklist indirect thunk functions for kprobes
retpoline: Introduce start/end markers of indirect thunk
x86/mce: Make machine check speculation protected
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 kexec fix from Thomas Gleixner:
"A single fix for the WBINVD issue introduced by the SME support which
causes kexec fails on non AMD/SME capable CPUs. Issue WBINVD only when
the CPU has SME and avoid doing so in a loop"
[ Side note: this patch fixes the problem, but it isn't entirely clear
why it is required. The wbinvd should just work regardless, but there
seems to be some system - as opposed to CPU - issue, since the wbinvd
causes more problems later in the shutdown sequence, but wbinvd
instructions while the system is still active are not problematic.
Possibly some SMI or pending machine check issue on the affected system ]
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Rework wbinvd, hlt operation in stop_this_cpu()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the new matrix allocator to prevent vector exhaustion
by certain network drivers which allocate gazillions of unused vectors
which cannot be put into reservation mode due to MSI and the lack of
MSI entry masking.
The fix/workaround is to spread the vectors across CPUs by searching
the supplied target CPU mask for the CPU with the smallest number of
allocated vectors"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq/matrix: Spread interrupts on allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha fixes from Matt Turner:
"A build fix and a regression fix"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha/PCI: Fix noname IRQ level detection
alpha: extend memset16 to EV6 optimised routines
|
|
Commit bacf6b499e11 ("x86/mm: Use a struct to reduce parameters for SME
PGD mapping") moved some parameters into a structure.
The structure was large enough to trigger the stack protection canary in
sme_encrypt_kernel which doesn't work this early, causing reboots.
Mark sme_encrypt_kernel appropriately to not use the canary.
Fixes: bacf6b499e11 ("x86/mm: Use a struct to reduce parameters for SME PGD mapping")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The conversion of the alpha architecture PCI host bridge legacy IRQ
mapping/swizzling to the new PCI host bridge map/swizzle hooks carried
out through:
commit 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with
host bridge IRQ mapping hooks")
implies that IRQ for devices are now allocated through pci_assign_irq()
function in pci_device_probe() that is called when a driver matching a
device is found in order to probe the device through the device driver.
Alpha noname platforms required IRQ level programming to be executed
in sio_fixup_irq_levels(), that is called in noname_init_pci(), a
platform hook called within a subsys_initcall.
In noname_init_pci(), present IRQs are detected through
sio_collect_irq_levels() that check the struct pci_dev->irq number
to detect if an IRQ has been allocated for the device.
By the time sio_collect_irq_levels() is called, some devices may still
have not a matching driver loaded to match them (eg loadable module)
therefore their IRQ allocation is still pending - which means that
sio_collect_irq_levels() does not programme the correct IRQ level for
those devices, causing their IRQ handling to be broken when the device
driver is actually loaded and the device is probed.
Fix the issue by adding code in the noname map_irq() function
(noname_map_irq()) that, whilst mapping/swizzling the IRQ line, it also
ensures that the correct IRQ level programming is executed at platform
level, fixing the issue.
Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with
host bridge IRQ mapping hooks")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # 4.14
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Meelis Roos <mroos@linux.ee>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
Pull KVM fixes from Radim Krčmář:
"ARM:
- fix incorrect huge page mappings on systems using the contiguous
hint for hugetlbfs
- support alternative GICv4 init sequence
- correctly implement the ARM SMCC for HVC and SMC handling
PPC:
- add KVM IOCTL for reporting vulnerability and workaround status
s390:
- provide userspace interface for branch prediction changes in
firmware
x86:
- use correct macros for bits"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: wire up bpb feature
KVM: PPC: Book3S: Provide information about hardware/firmware CVE workarounds
KVM/x86: Fix wrong macro references of X86_CR0_PG_BIT and X86_CR4_PAE_BIT in kvm_valid_sregs()
arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls
KVM: arm64: Fix GICv4 init when called from vgic_its_create
KVM: arm/arm64: Check pagesize when allocating a hugepage at Stage 2
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"Some final MIPS fixes for 4.15, including important build fixes and a
MAINTAINERS update:
- Add myself as MIPS co-maintainer.
- Fix various all*config build failures (particularly as a result of
switching the default MIPS platform to the "generic" platform).
- Fix GCC7 build failures (duplicate const and questionable calls to
missing __multi3 intrinsic on mips64r6).
- Fix warnings when CPU Idle is enabled (4.14).
- Fix AR7 serial output (since 3.17).
- Fix ralink platform_get_irq error checking (since 3.12)"
* tag 'mips_fixes_4.15_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MAINTAINERS: Add James as MIPS co-maintainer
MIPS: Fix undefined reference to physical_memsize
MIPS: Implement __multi3 for GCC7 MIPS64r6 builds
MIPS: mm: Fix duplicate "const" on insn_table_MM
MIPS: CM: Drop WARN_ON(vp != 0)
MIPS: ralink: Fix platform_get_irq's error checking
MIPS: Fix CPS SMP NS16550 UART defaults
MIPS: BCM47XX Avoid compile error with MIPS allnoconfig
MIPS: RB532: Avoid undefined mac_pton without GENERIC_NET_UTILS
MIPS: RB532: Avoid undefined early_serial_setup() without SERIAL_8250_CONSOLE
MIPS: ath25: Avoid undefined early_serial_setup() without SERIAL_8250_CONSOLE
MIPS: AR7: ensure the port type's FCR value is used
|
|
The new firmware interfaces for branch prediction behaviour changes
are transparently available for the guest. Nevertheless, there is
new state attached that should be migrated and properly resetted.
Provide a mechanism for handling reset, migration and VSIE.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[Changed capability number to 152. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Add PPC KVM ioctl to report vulnerability and workaround status to userspace.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One fix for SAS attached SATA CD-ROMs. It turns out that the libata
handling of CD devices relies on the SCSI error handler, so disable
async aborts (which don't start the error handler) for these devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Disable asynchronous aborts for SATA devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"All fixes marked for stable:
- Fix DM thinp btree corruption seen when inserting a new key/value
pair into a full root node.
- Fix DM thinp btree removal deadlock due to artificially low number
of allowed concurrent locks allowed.
- Fix possible DM crypt corruption if kernel keyring service is used.
Only affects ciphers using following IVs: essiv, lmk and tcw.
- Two DM crypt device initialization error checking fixes.
- Fix DM integrity to allow use of async ciphers that require DMA"
* tag 'for-4.15/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: fix error return code in crypt_ctr()
dm crypt: wipe kernel key copy after IV initialization
dm integrity: don't store cipher request on the stack
dm crypt: fix crash by adding missing check for auth key size
dm btree: fix serious bug in btree_split_beneath()
dm thin metadata: THIN_MAX_CONCURRENT_LOCKS should be 6
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two more small fixes
- The conversion of enums into their actual numbers to display in the
event format file had an off-by-one bug, that could cause an enum
not to be converted, and break user space parsing tools.
- A fix to a previous fix to bring back the context recursion checks.
The interrupt case checks for NMI, IRQ and softirq, but the softirq
returned the same number regardless if it was set or not, although
the logic would force it to be set if it were hit"
* tag 'trace-v4.15-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix converting enum's from the map in trace_event_eval_update()
ring-buffer: Fix duplicate results in mapping context to bits in recursive lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for use-after-free in Synaptics RMI4 driver
- correction to multitouch contact tracking on certain ALPS touchpads
(which got broken when we tried to fix the 2-finger scrolling)
- touchpad on Lenovo T640p is switched over to SMbus/RMI
- a few device node refcount fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - prevent UAF reported by KASAN
Input: ALPS - fix multi-touch decoding on SS4 plus touchpads
Input: synaptics - Lenovo Thinkpad T460p devices should use RMI
Input: of_touchscreen - add MODULE_LICENSE
Input: 88pm860x-ts - fix child-node lookup
Input: twl6040-vibra - fix child-node lookup
Input: twl4030-vibra - fix sibling-node lookup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two bugfixes for the I2C core: Lixing Wang fixed a refcounting problem
with DT nodes. Jeremy Compostella fixed a buffer overflow possibility
when using a 'don't use' ioctl interface directly"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA
i2c: core: decrease reference count of device node in i2c_unregister_device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixlet from Tejun Heo:
"This just adds one more entry for liteon optical drives to the device
blacklist for large IOs.
The change is very low risk"
* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: apply MAX_SEC_1024 to all LITEON EP1 series devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"cgroup.threads should be delegatable (ie. a container should be able
to write to it from inside) but was missing the flag.
The change is very low risk"
* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: make cgroup.threads delegatable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixlet from Tejun Heo:
"One patch to add touch_nmi_watchdog() while dumping workqueue debug
messages to avoid triggering the lockup detector spuriously.
The change is very low risk"
* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: avoid hard lockups in show_workqueue_state()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"We have various small DT fixes, and one important regression fix:
The recent device tree bugfixes that were intended to address issues
that 'dtc' started warning about in 4.15 fixed various USB PHY device
nodes, but it turns out that we had code that depended on those nodes
being incorrect and the probe failing with a particular error code.
With the workaround we can also deal with correct device nodes.
The DT fixes include:
- Allwinner A10 and A20 had the display pipeline set up incorrectly
(introduced in v4.15)
- The Altera PMU lacked an interrupt-parent (never worked)
- Pin muxing on the Openblocks A7 (never worked)
- Clocks might get set up wrong on Armada 7K/8K (4.15 regression)
We now have additional device tree patches to address all the
remaining warnings introduced in 4.15, but decided to queue them for
4.16 instead, to avoid risking another regression like the USB PHY
thing mentioned above.
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
phy: work around 'phys' references to usb-nop-xceiv devices
ARM: sunxi_defconfig: Enable CMA
arm64: dts: socfpga: add missing interrupt-parent
ARM: dts: sun[47]i: Fix display backend 1 output to TCON0 remote endpoint
ARM64: dts: marvell: armada-cp110: Fix clock resources for various node
ARM: dts: da850-lcdk: Remove leading 0x and 0s from unit address
ARM: dts: kirkwood: fix pin-muxing of MPP7 on OpenBlocks A7
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"More than we'd like after rc8, but nothing very alarming either, just
tying up loose ends before the release:
Since we changed powernv to use cpufreq_get() from show_cpuinfo(), we
see warnings with PREEMPT enabled. But the preempt_disable() in
show_cpuinfo() doesn't actually prevent CPU hotplug as it suggests, so
remove it.
Two updates to the recently merged RFI flush code. Wire up the generic
sysfs file to report the status, and add a debugfs file to allow
enabling/disabling it at runtime.
Two updates to xmon, one to add the RFI flush related fields to the
paca dump, and another to not use hashed pointers in the paca dump.
And one minor fix to add a missing include of linux/types.h in
asm/hvcall.h, not seen to break the build in upstream, but correct
anyway.
Thanks to: Benjamin Herrenschmidt, Michal Suchanek, Nicholas Piggin"
* tag 'powerpc-4.15-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: include linux/types.h in asm/hvcall.h
powerpc/64s: Allow control of RFI flush via debugfs
powerpc/64s: Wire up cpu_show_meltdown()
powerpc: Don't preempt_disable() in show_cpuinfo()
powerpc/xmon: Don't print hashed pointers in paca dump
powerpc/xmon: Add RFI flush related fields to paca dump
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Nouveau, i915, vmwgfx and sun4i regression fixes.
The i915 change fixes a display corruption problem introduced in 4.15,
the nouveau changes are for regressions in 4.15, one of the vmwgfx
fixes goes back a little further, the other is a 4.15 regression fix,
the 3 sun4i changes fix blank HDMI output on those devices"
* tag 'drm-fixes-for-v4.15-rc9' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/mmu/mcp77: fix regressions in stolen memory handling
drm/nouveau/bar/gk20a: Avoid bar teardown during init
drm/nouveau/drm/nouveau: Pass the proper arguments to nvif_object_map_handle()
drm/vmwgfx: fix memory corruption with legacy/sou connectors
drm/vmwgfx: Fix a boot time warning
drm/i915: Fix deadlock in i830_disable_pipe()
drm/i915: Redo plane sanitation during readout
drm/i915: Add .get_hw_state() method for planes
drm/sun4i: hdmi: Add missing rate halving check in sun4i_tmds_determine_rate
drm/sun4i: hdmi: Fix incorrect assignment in sun4i_tmds_determine_rate
drm/sun4i: hdmi: Check for unset best_parent in sun4i_tmds_determine_rate
|
|
Merge misc fixes from Andrew Morton:
"6 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
sparse doesn't support struct randomization
proc: fix coredump vs read /proc/*/stat race
scripts/gdb/linux/tasks.py: fix get_thread_info
scripts/decodecode: fix decoding for AArch64 (arm64) instructions
mm/page_owner.c: remove drain_all_pages from init_early_allocated_pages
mm/memory.c: release locked page in do_swap_page()
|
|
Force __builtin_constant_p to evaluate whether the argument to atomic_add
& atomic_sub is constant in the front-end before optimisations which
can lead GCC to output a call to __bad_increment_for_ia64_fetch_and_add().
See GCC bugzilla 83653.
Signed-off-by: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Without this patch, I drown in a sea of unknown attribute warnings
Link: http://lkml.kernel.org/r/20180117024539.27354-1-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
