| Age | Commit message (Collapse) | Author |
|---|
|
Commit f7b93d42945c ("arm64/alternatives: use subsections for replacement
sequences") moved the alternatives replacement sequences into subsections,
in order to keep the as close as possible to the code that they replace.
Unfortunately, this broke the logic in branch_insn_requires_update,
which assumed that any branch into kernel executable code was a branch
that required updating, which is no longer the case now that the code
sequences that are patched in are in the same section as the patch site
itself.
So the only way to discriminate branches that require updating and ones
that don't is to check whether the branch targets the replacement sequence
itself, and so we can drop the call to kernel_text_address() entirely.
Fixes: f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences")
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20200709125953.30918-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If the pmd is soft dirty we must mark the pte as soft dirty (and not dirty).
This fixes some cases for guest migration with huge page backings.
Cc: <stable@vger.kernel.org> # 4.8
Fixes: bc29b7ac1d9f ("s390/mm: clean up pte/pmd encoding")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When the erratum_1463225 array was introduced a sentinel at the end was
missing thus causing a KASAN: global-out-of-bounds in
is_affected_midr_range_list on arm64 error.
Fixes: a9e821b89daa ("arm64: Add KRYO4XX gold CPU cores to erratum list 1463225 and 1418040")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/linux-arm-kernel/CA+G9fYs3EavpU89-rTQfqQ9GgxAMgMAk7jiiVrfP0yxj5s+Q6g@mail.gmail.com/
Link: https://lore.kernel.org/r/20200709051345.14544-1-f.fainelli@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
I got a memleak report when doing some fuzz test:
BUG: memory leak
unreferenced object 0xffff888113e02300 (size 488):
comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
a0 a4 ce 19 81 88 ff ff 60 ce 09 0d 81 88 ff ff ........`.......
backtrace:
[<00000000129a84ec>] kmem_cache_zalloc include/linux/slab.h:659 [inline]
[<00000000129a84ec>] __alloc_file+0x25/0x310 fs/file_table.c:101
[<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151
[<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193
[<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233
[<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline]
[<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74
[<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720
[<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
[<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
BUG: memory leak
unreferenced object 0xffff8881152dd5e0 (size 16):
comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s)
hex dump (first 16 bytes):
01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000074caa794>] kmem_cache_zalloc include/linux/slab.h:659 [inline]
[<0000000074caa794>] lsm_file_alloc security/security.c:567 [inline]
[<0000000074caa794>] security_file_alloc+0x32/0x160 security/security.c:1440
[<00000000c6745ea3>] __alloc_file+0xba/0x310 fs/file_table.c:106
[<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151
[<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193
[<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233
[<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline]
[<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74
[<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720
[<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
[<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
If io_sqe_file_register() failed, we need put the file that get by fget()
to avoid the memleak.
Fixes: c3a31e605620 ("io_uring: add support for IORING_REGISTER_FILES_UPDATE")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For those applications which are not willing to use io_uring_enter()
to reap and handle cqes, they may completely rely on liburing's
io_uring_peek_cqe(), but if cq ring has overflowed, currently because
io_uring_peek_cqe() is not aware of this overflow, it won't enter
kernel to flush cqes, below test program can reveal this bug:
static void test_cq_overflow(struct io_uring *ring)
{
struct io_uring_cqe *cqe;
struct io_uring_sqe *sqe;
int issued = 0;
int ret = 0;
do {
sqe = io_uring_get_sqe(ring);
if (!sqe) {
fprintf(stderr, "get sqe failed\n");
break;;
}
ret = io_uring_submit(ring);
if (ret <= 0) {
if (ret != -EBUSY)
fprintf(stderr, "sqe submit failed: %d\n", ret);
break;
}
issued++;
} while (ret > 0);
assert(ret == -EBUSY);
printf("issued requests: %d\n", issued);
while (issued) {
ret = io_uring_peek_cqe(ring, &cqe);
if (ret) {
if (ret != -EAGAIN) {
fprintf(stderr, "peek completion failed: %s\n",
strerror(ret));
break;
}
printf("left requets: %d\n", issued);
continue;
}
io_uring_cqe_seen(ring, cqe);
issued--;
printf("left requets: %d\n", issued);
}
}
int main(int argc, char *argv[])
{
int ret;
struct io_uring ring;
ret = io_uring_queue_init(16, &ring, 0);
if (ret) {
fprintf(stderr, "ring setup failed: %d\n", ret);
return 1;
}
test_cq_overflow(&ring);
return 0;
}
To fix this issue, export cq overflow status to userspace by adding new
IORING_SQ_CQ_OVERFLOW flag, then helper functions() in liburing, such as
io_uring_peek_cqe, can be aware of this cq overflow and do flush accordingly.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As of commit 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather
than a mask") lookup_user_key() needs an explicit declaration of what it
wants to do with the key. Add KEY_NEED_SEARCH to fix a warning with the
below signature, and fixes the inability to retrieve a key.
WARNING: CPU: 15 PID: 6276 at security/keys/permission.c:35 key_task_permission+0xd3/0x140
[..]
RIP: 0010:key_task_permission+0xd3/0x140
[..]
Call Trace:
lookup_user_key+0xeb/0x6b0
? vsscanf+0x3df/0x840
? key_validate+0x50/0x50
? key_default_cmp+0x20/0x20
nvdimm_get_user_key_payload.part.0+0x21/0x110 [libnvdimm]
nvdimm_security_store+0x67d/0xb20 [libnvdimm]
security_store+0x67/0x1a0 [libnvdimm]
kernfs_fop_write+0xcf/0x1c0
vfs_write+0xde/0x1d0
ksys_write+0x68/0xe0
do_syscall_64+0x5c/0xa0
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Fixes: 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather than a mask")
Suggested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/159297332630.1304143.237026690015653759.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
ib_pd is accessed internally during destroy of the TIR/TIS, but PD
can be not set yet. This leading to the following kernel panic.
BUG: kernel NULL pointer dereference, address: 0000000000000074
PGD 8000000079eaa067 P4D 8000000079eaa067 PUD 7ae81067 PMD 0 Oops: 0000 [#1] SMP PTI
CPU: 1 PID: 709 Comm: syz-executor.0 Not tainted 5.8.0-rc3 #41 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
RIP: 0010:destroy_raw_packet_qp_tis drivers/infiniband/hw/mlx5/qp.c:1189 [inline]
RIP: 0010:destroy_raw_packet_qp drivers/infiniband/hw/mlx5/qp.c:1527 [inline]
RIP: 0010:destroy_qp_common+0x2ca/0x4f0 drivers/infiniband/hw/mlx5/qp.c:2397
Code: 00 85 c0 74 2e e8 56 18 55 ff 48 8d b3 28 01 00 00 48 89 ef e8 d7 d3 ff ff 48 8b 43 08 8b b3 c0 01 00 00 48 8b bd a8 0a 00 00 <0f> b7 50 74 e8 0d 6a fe ff e8 28 18 55 ff 49 8d 55 50 4c 89 f1 48
RSP: 0018:ffffc900007bbac8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88807949e800 RCX: 0000000000000998
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88807c180140
RBP: ffff88807b50c000 R08: 000000000002d379 R09: ffffc900007bba00
R10: 0000000000000001 R11: 000000000002d358 R12: ffff888076f37000
R13: ffff88807949e9c8 R14: ffffc900007bbe08 R15: ffff888076f37000
FS: 00000000019bf940(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000074 CR3: 0000000076d68004 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
mlx5_ib_create_qp+0xf36/0xf90 drivers/infiniband/hw/mlx5/qp.c:3014
_ib_create_qp drivers/infiniband/core/core_priv.h:333 [inline]
create_qp+0x57f/0xd20 drivers/infiniband/core/uverbs_cmd.c:1443
ib_uverbs_create_qp+0xcf/0x100 drivers/infiniband/core/uverbs_cmd.c:1564
ib_uverbs_write+0x5fa/0x780 drivers/infiniband/core/uverbs_main.c:664
__vfs_write+0x3f/0x90 fs/read_write.c:495
vfs_write+0xc7/0x1f0 fs/read_write.c:559
ksys_write+0x5e/0x110 fs/read_write.c:612
do_syscall_64+0x3e/0x70 arch/x86/entry/common.c:359
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x466479
Code: Bad RIP value.
RSP: 002b:00007ffd057b62b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000466479
RDX: 0000000000000070 RSI: 0000000020000240 RDI: 0000000000000003
RBP: 00000000019bf8fc R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000bf6 R14: 00000000004cb859 R15: 00000000006fefc0
Fixes: 6c41965d647a ("RDMA/mlx5: Don't access ib_qp fields in internal destroy QP path")
Link: https://lore.kernel.org/r/20200707110612.882962-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Some released FW versions mistakenly don't set the capability that 50G per
lane link-modes are supported for VFs (ptys_extended_ethernet capability
bit).
Use PTYS.ext_eth_proto_capability instead, as this indication is always
accurate. If PTYS.ext_eth_proto_capability is valid
(has a non-zero value) conclude that the HCA supports 50G per lane.
Otherwise, conclude that the HCA doesn't support 50G per lane.
Fixes: 08e8676f1607 ("IB/mlx5: Add support for 50Gbps per lane link modes")
Link: https://lore.kernel.org/r/20200707110612.882962-3-leon@kernel.org
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The bond_ipsec_* helpers don't need RTNL, and can potentially get called
without it being held, so switch from rtnl_dereference() to
rcu_dereference() to access bond struct data.
Lightly tested with xfrm bonding, no problems found, should address the
syzkaller bug referenced below.
Reported-by: syzbot+582c98032903dcc04816@syzkaller.appspotmail.com
CC: Huy Nguyen <huyn@mellanox.com>
CC: Saeed Mahameed <saeedm@mellanox.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make sure we don't regress the CAP_SYSLOG behavior of the module address
visibility via /proc/modules nor /sys/module/*/sections/*.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
When evaluating access control over kallsyms visibility, credentials at
open() time need to be used, not the "current" creds (though in BPF's
case, this has likely always been the same). Plumb access to associated
file->f_cred down through bpf_dump_raw_ok() and its callers now that
kallsysm_show_value() has been refactored to take struct cred.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 7105e828c087 ("bpf: allow for correlation of maps and helpers in dump")
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The kprobe show() functions were using "current"'s creds instead
of the file opener's creds for kallsyms visibility. Fix to use
seq_file->file->f_cred.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 81365a947de4 ("kprobes: Show address of kprobes if kallsyms does")
Fixes: ffb9bd68ebdb ("kprobes: Show blacklist addresses as same as kallsyms does")
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The printing of section addresses in /sys/module/*/sections/* was not
using the correct credentials to evaluate visibility.
Before:
# cat /sys/module/*/sections/.*text
0xffffffffc0458000
...
# capsh --drop=CAP_SYSLOG -- -c "cat /sys/module/*/sections/.*text"
0xffffffffc0458000
...
After:
# cat /sys/module/*/sections/*.text
0xffffffffc0458000
...
# capsh --drop=CAP_SYSLOG -- -c "cat /sys/module/*/sections/.*text"
0x0000000000000000
...
Additionally replaces the existing (safe) /proc/modules check with
file->f_cred for consistency.
Reported-by: Dominik Czarnota <dominik.czarnota@trailofbits.com>
Fixes: be71eda5383f ("module: Fix display of wrong module .text address")
Cc: stable@vger.kernel.org
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In order to gain access to the open file's f_cred for kallsym visibility
permission checks, refactor the module section attributes to use the
bin_attribute instead of attribute interface. Additionally removes the
redundant "name" struct member.
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In order to perform future tests against the cred saved during open(),
switch kallsyms_show_value() to operate on a cred, and have all current
callers pass current_cred(). This makes it very obvious where callers
are checking the wrong credential in their "read" contexts. These will
be fixed in the coming patches.
Additionally switch return value to bool, since it is always used as a
direct permission check, not a 0-on-success, negative-on-error style
function return.
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Andrii Nakryiko says:
====================
This patch set improves libbpf's support of old kernels, missing features like
BTF support, global variables support, etc.
Most critical one is a silent drop of CO-RE relocations if libbpf fails to
load BTF (despite sanitization efforts). This is frequently the case for
kernels that have no BTF support whatsoever. There are still useful BPF
applications that could work on such kernels and do rely on CO-RE. To that
end, this series revamps the way BTF is handled in libbpf. Failure to load BTF
into kernel doesn't prevent libbpf from using BTF in its full capability
(e.g., for CO-RE relocations) internally.
Another issue that was identified was reliance of perf_buffer__new() on
BPF_OBJ_GET_INFO_BY_FD command, which is more recent that perf_buffer support
itself. Furthermore, BPF_OBJ_GET_INFO_BY_FD is needed just for some sanity
checks to provide better user errors, so could be safely omitted if kernel
doesn't provide it.
Perf_buffer selftest was adjusted to use skeleton, instead of bpf_prog_load().
The latter uses BPF_F_TEST_RND_HI32 flag, which is a relatively recent
addition and unnecessary fails selftest in libbpf's Travis CI tests. By using
skeleton we both get a shorter selftest and it work on pretty ancient kernels,
giving better libbpf test coverage.
One new selftest was added that relies on basic CO-RE features, but otherwise
doesn't expect any recent features (like global variables) from kernel. Again,
it's good to have better coverage of old kernels in libbpf testing.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Switch perf_buffer test to use skeleton to avoid use of bpf_prog_load() and
make test a bit more succinct. Also switch BPF program to use tracepoint
instead of kprobe, as that allows to support older kernels, which had
tracepoint support before kprobe support in the form that libbpf expects
(i.e., libbpf expects /sys/bus/event_source/devices/kprobe/type, which doesn't
always exist on old kernels).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-7-andriin@fb.com
|
|
perf_buffer__new() is relying on BPF_OBJ_GET_INFO_BY_FD availability for few
sanity checks. OBJ_GET_INFO for maps is actually much more recent feature than
perf_buffer support itself, so this causes unnecessary problems on old kernels
before BPF_OBJ_GET_INFO_BY_FD was added.
This patch makes those sanity checks optional and just assumes best if command
is not supported. If user specified something incorrectly (e.g., wrong map
type), kernel will reject it later anyway, except user won't get a nice
explanation as to why it failed. This seems like a good trade off for
supporting perf_buffer on old kernels.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-6-andriin@fb.com
|
|
Add a test that relies on CO-RE, but doesn't expect any of the recent
features, not available on old kernels. This is useful for Travis CI tests
running against very old kernels (e.g., libbpf has 4.9 kernel testing now), to
verify that CO-RE still works, even if kernel itself doesn't support BTF yet,
as long as there is .BTF embedded into vmlinux image by pahole. Given most of
CO-RE doesn't require any kernel awareness of BTF, it is a useful test to
validate that libbpf's BTF sanitization is working well even with ancient
kernels.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-5-andriin@fb.com
|
|
Change sanitization process to preserve original BTF, which might be used by
libbpf itself for Kconfig externs, CO-RE relocs, etc, even if kernel is old
and doesn't support BTF. To achieve that, if libbpf detects the need for BTF
sanitization, it would clone original BTF, sanitize it in-place, attempt to
load it into kernel, and if successful, will preserve loaded BTF FD in
original `struct btf`, while freeing sanitized local copy.
If kernel doesn't support any BTF, original btf and btf_ext will still be
preserved to be used later for CO-RE relocation and other BTF-dependent libbpf
features, which don't dependon kernel BTF support.
Patch takes care to not specify BTF and BTF.ext features when loading BPF
programs and/or maps, if it was detected that kernel doesn't support BTF
features.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-4-andriin@fb.com
|
|
Add setter for BTF FD to allow application more fine-grained control in more
advanced scenarios. Storing BTF FD inside `struct btf` provides little benefit
and probably would be better done differently (e.g., btf__load() could just
return FD on success), but we are stuck with this due to backwards
compatibility. The main problem is that it's impossible to load BTF and than
free user-space memory, but keep FD intact, because `struct btf` assumes
ownership of that FD upon successful load and will attempt to close it during
btf__free(). To allow callers (e.g., libbpf itself for BTF sanitization) to
have more control over this, add btf__set_fd() to allow to reset FD
arbitrarily, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-3-andriin@fb.com
|
|
With valid ELF and valid BTF, there is no reason (apart from bugs) why BTF
finalization should fail. So make it strict and return error if it fails. This
makes CO-RE relocation more reliable, as they are not going to be just
silently skipped, if BTF finalization failed.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-2-andriin@fb.com
|
|
Convert all-mask IP address to Big Endian, instead, for comparison.
Fixes: f286dd8eaad5 ("cxgb4: use correct type for all-mask IP address comparison")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DP83869 is an Ethernet PHY, not a charger, so fix the documentation
accordingly.
Fixes: 4d66c56f7efe ("dt-bindings: net: dp83869: Add TI dp83869 phy")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DP83867 is an Ethernet PHY, not a charger, so fix the documentation
accordingly.
Fixes: 74ac28f16486 ("dt-bindings: dp83867: Convert DP83867 to yaml")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A scenario has been observed where a 'bc_init' message for a link is not
retransmitted if it fails to be received by the peer. This leads to the
peer never establishing the link fully and it discarding all other data
received on the link. In this scenario the message is lost in transit to
the peer.
The issue is traced to the 'nxt_retr' field of the skb not being
initialised for links that aren't a bc_sndlink. This leads to the
comparison in tipc_link_advance_transmq() that gates whether to attempt
retransmission of a message performing in an undesirable way.
Depending on the relative value of 'jiffies', this comparison:
time_before(jiffies, TIPC_SKB_CB(skb)->nxt_retr)
may return true or false given that 'nxt_retr' remains at the
uninitialised value of 0 for non bc_sndlinks.
This is most noticeable shortly after boot when jiffies is initialised
to a high value (to flush out rollover bugs) and we compare a jiffies of,
say, 4294940189 to zero. In that case time_before returns 'true' leading
to the skb not being retransmitted.
The fix is to ensure that all skbs have a valid 'nxt_retr' time set for
them and this is achieved by refactoring the setting of this value into
a central function.
With this fix, transmission losses of 'bc_init' messages do not stall
the link establishment forever because the 'bc_init' message is
retransmitted and the link eventually establishes correctly.
Fixes: 382f598fb66b ("tipc: reduce duplicate packets for unicast traffic")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's possible that device removal happens when the bond is in non-AB mode,
and addition happens in AB mode, so bond_ipsec_del_sa() never gets called,
which leaves security associations in an odd state if bond_ipsec_add_sa()
then gets called after switching the bond into AB. Just call add and
delete universally for all modes to keep things consistent.
However, it's also possible that this code gets called when the system is
shutting down, and the xfrm subsystem has already been disconnected from
the bond device, so we need to do some error-checking and bail, lest we
hit a null ptr deref.
Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load")
CC: Huy Nguyen <huyn@mellanox.com>
CC: Saeed Mahameed <saeedm@mellanox.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Linus Walleij says:
====================
RTL8366RB tagging support
This patch set adds DSA tagging support to the RTL8366RB
DSA driver.
There is a minor performance improvement in the tag parser
compared to the previous patch set and the review tags
have been collected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This activates the support to use the CPU tag to properly
direct ingress traffic to the right port.
Bit 15 in register RTL8368RB_CPU_CTRL_REG can be set to
1 to disable the insertion of the CPU tag which is what
the code currently does. The bit 15 define calls this
setting RTL8368RB_CPU_INSTAG which is confusing since the
inverse meaning is implied: programmers may think that
setting this bit to 1 will *enable* inserting the tag
rather than disabling it, so rename this setting in
bit 15 to RTL8368RB_CPU_NO_TAG which is more to the
point.
After this e.g. ping works out-of-the-box with the
RTL8366RB.
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This implements the known parts of the Realtek 4 byte
tag protocol version 0xA, as found in the RTL8366RB
DSA switch.
It is designated as protocol version 0xA as a
different Realtek 4 byte tag format with protocol
version 0x9 is known to exist in the Realtek RTL8306
chips.
The tag and switch chip lacks public documentation, so
the tag format has been reverse-engineered from
packet dumps. As only ingress traffic has been available
for analysis an egress tag has not been possible to
develop (even using educated guesses about bit fields)
so this is as far as it gets. It is not known if the
switch even supports egress tagging.
Excessive attempts to figure out the egress tag format
was made. When nothing else worked, I just tried all bit
combinations with 0xannp where a is protocol and p is
port. I looped through all values several times trying
to get a response from ping, without any positive
result.
Using just these ingress tags however, the switch
functionality is vastly improved and the packets find
their way into the destination port without any
tricky VLAN configuration. On the D-Link DIR-685 the
LAN ports now come up and respond to ping without
any command line configuration so this is a real
improvement for users.
Egress packets need to be restricted to the proper
target ports using VLAN, which the RTL8366RB DSA
switch driver already sets up.
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a number of places in test_progs that use minus-1 as the argument
to exit(). This is confusing as a process exit status is masked to be a
number between 0 and 255 as defined in man exit(3). Thus, users will see
status 255 instead of minus-1.
This patch use positive exit code 3 instead of minus-1. These cases are put
in the same group of infrastructure setup errors.
Fixes: fd27b1835e70 ("selftests/bpf: Reset process and thread affinity after each test/sub-test")
Fixes: 811d7e375d08 ("bpf: selftests: Restore netns after each test")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159410594499.1093222.11080787853132708654.stgit@firesoul
|
|
This is a follow up adjustment to commit 6c92bd5cd465 ("selftests/bpf:
Test_progs indicate to shell on non-actions"), that returns shell exit
indication EXIT_FAILURE (value 1) when user selects a non-existing test.
The problem with using EXIT_FAILURE is that a shell script cannot tell
the difference between a non-existing test and the test failing.
This patch uses value 2 as shell exit indication.
(Aside note unrecognized option parameters use value 64).
Fixes: 6c92bd5cd465 ("selftests/bpf: Test_progs indicate to shell on non-actions")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159410593992.1093222.90072558386094370.stgit@firesoul
|
|
emit_obj_refs_json needs to added the same as with emit_obj_refs_plain
to prevent segfaults, similar to Commit "8ae4121bd89e bpf: Fix bpftool
without skeleton code enabled"). See the error below:
# ./bpftool -p prog
{
"error": "bpftool built without PID iterator support"
},[{
"id": 2,
"type": "cgroup_skb",
"tag": "7be49e3934a125ba",
"gpl_compatible": true,
"loaded_at": 1594052789,
"uid": 0,
"bytes_xlated": 296,
"jited": true,
"bytes_jited": 203,
"bytes_memlock": 4096,
"map_ids": [2,3
Segmentation fault (core dumped)
The same happens for ./bpftool -p map, as well as ./bpftool -j prog/map.
Fixes: d53dee3fe013 ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs")
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200708110827.7673-1-louis.peens@netronome.com
|
|
This patch exposes new link modes using 100Gbps per lane, including 100G,
200G and 400G modes.
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define 100G, 200G and 400G link modes using 100Gbps per lane
LR, ER and FR are defined as a single link mode because they are
using same technology and by design are fully interoperable.
EEPROM content indicates if the module is LR, ER, or FR, and the
user space ethtool decoder is planned to support decoding these
modes in the EEPROM.
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
CC: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the tx path of l2tp, l2tp_xmit_skb() calls skb_dst_set() to set
skb's dst. However, it will eventually call inet6_csk_xmit() or
ip_queue_xmit() where skb's dst will be overwritten by:
skb_dst_set_noref(skb, dst);
without releasing the old dst in skb. Then it causes dst/dev refcnt leak:
unregister_netdevice: waiting for eth0 to become free. Usage count = 1
This can be reproduced by simply running:
# modprobe l2tp_eth && modprobe l2tp_ip
# sh ./tools/testing/selftests/net/l2tp.sh
So before going to inet6_csk_xmit() or ip_queue_xmit(), skb's dst
should be dropped. This patch is to fix it by removing skb_dst_set()
from l2tp_xmit_skb() and moving skb_dst_drop() into l2tp_xmit_core().
Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: James Chapman <jchapman@katalix.com>
Tested-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Michael Chan says:
====================
bnxt_en: Driver update for net-next.
This patchset implements ethtool -X to setup user-defined RSS indirection
table. The new infrastructure also allows the proper logical ring index
to be used to populate the RSS indirection when queried by ethtool -x.
Prior to these patches, we were incorrectly populating the output of
ethtool -x with internal ring IDs which would make no sense to the user.
The last 2 patches add some cleanups to the VLAN acceleration logic
and check the firmware capabilities before allowing VLAN acceleration
offloads.
v4: Move bnxt_get_rxfh_indir_size() fix to a new patch #2.
Modify patch #7 to revert RSS map to default only when necessary.
v3: Use ALIGN() in patch 5.
Add warning messages in patch 6.
v2: Some RSS indirection table changes requested by Jakub Kicinski.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bare-metal use cases require giving firmware and the embedded
application processor control over VLAN offloads. The driver should
not attempt to override or utilize this feature in such scenarios
since it will not work as expected.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The hardware VLAN offload feature on our NIC does not have separate
knobs for handling customer and service tags on RX. Either offloading
of both must be enabled or both must be disabled. Introduce definitions
for the combined feature set in order to clean up the code and make
this constraint more clear. Technically these features can be separately
enabled on TX, however, since the default is to turn both on, the
combined TX feature set is also introduced for code consistency.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the new infrastructure in place, we can now support the setting of
the indirection table from ethtool.
When changing channels, in a rare case that firmware cannot reserve the
rings that were promised, we will still try to keep the RSS map and only
revert to default when absolutely necessary.
v4: Revert RSS map to default during ring change only when absolutely
necessary.
v3: Add warning messages when firmware cannot reserve the requested RX
rings, and when the RSS table entries have to change to default.
v2: When changing channels, if the RSS table size changes and RSS map
is non-default, return error.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we have the logical indirection table, we can return these
proper logical indices directly to ethtool -x instead of the physical
IDs.
Reported-by: Jakub Kicinski <kicinski@fb.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we have the logical table, we can fill the HW RSS table
using the logical table's entries and converting them to the HW
specific format. Re-initialize the logical table to standard
distribution if the number of RX rings changes during ring reservation.
v4: Use bnxt_get_rxfh_indir_size() to get the RSS table size.
v2: Use ALIGN() to roundup the RSS table size.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On some chips, this varies based on the number of RX rings. Add this
helper function and refactor the existing code to use it.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver currently does not keep track of the logical RSS indirection
table. The hardware RSS table is set up with standard default ring
distribution when initializing the chip. This makes it difficult to
support user sepcified indirection table entries. As a first step, add
the logical table in the main bnxt structure and allocate it according
to chip specific table size. Add a function that sets up default
RSS distribution based on the number of RX rings.
v4: Use bnxt_get_rxfh_indir_size() for the current RSS table size.
v2: Use kmalloc_array() since we init. all entries afterwards.
Use ALIGN() to roundup the RSS table size.
Use ethtool_rxfh_indir_default() to init. the default entries.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix up bnxt_get_rxfh_indir_size() to return the proper current RSS
table size for P5 chips. Change it to non-static so that bnxt.c
can use it to get the table size.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, we allocate one page for the hardware DMA RSS indirection
table. While the size is currently big enough for all chips, future
chip variations may support bigger sizes, so it is better to calculate
and store the chip specific size and allocate accordingly.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When adding first socket to nbd, if nsock's allocation failed, the data
structure member "config->socks" was reallocated, but the data structure
member "config->num_connections" was not updated. A memory leak will occur
then because the function "nbd_config_put" will free "config->socks" only
when "config->num_connections" is not zero.
Fixes: 03bf73c315ed ("nbd: prevent memory leak")
Reported-by: syzbot+934037347002901b8d2a@syzkaller.appspotmail.com
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
cpu-feature-registers.rst is missing a new line before a couple
of tables listing the visible fields, causing broken tables in
the HTML documentation generated by "make htmldocs". Fix this
by adding the missing new line.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20200707143152.154541-1-suzuki.poulose@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
After entering kdb due to breakpoint, when we execute 'ss' or 'go' (will
delay installing breakpoints, do single-step first), it won't work
correctly, and it will enter kdb due to oops.
It's because the reason gotten in kdb_stub() is not as expected, and it
seems that the ex_vector for single-step should be 0, like what arch
powerpc/sh/parisc has implemented.
Before the patch:
Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry
[0]kdb> bp printk
Instruction(i) BP #0 at 0xffff8000101486cc (printk)
is enabled addr at ffff8000101486cc, hardtype=0 installed=0
[0]kdb> g
/ # echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 due to Breakpoint @ 0xffff8000101486cc
[3]kdb> ss
Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 Oops: (null)
due to oops @ 0xffff800010082ab8
CPU: 3 PID: 266 Comm: sh Not tainted 5.7.0-rc4-13839-gf0e5ad491718 #6
Hardware name: linux,dummy-virt (DT)
pstate: 00000085 (nzcv daIf -PAN -UAO)
pc : el1_irq+0x78/0x180
lr : __handle_sysrq+0x80/0x190
sp : ffff800015003bf0
x29: ffff800015003d20 x28: ffff0000fa878040
x27: 0000000000000000 x26: ffff80001126b1f0
x25: ffff800011b6a0d8 x24: 0000000000000000
x23: 0000000080200005 x22: ffff8000101486cc
x21: ffff800015003d30 x20: 0000ffffffffffff
x19: ffff8000119f2000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000
x9 : 0000000000000000 x8 : ffff800015003e50
x7 : 0000000000000002 x6 : 00000000380b9990
x5 : ffff8000106e99e8 x4 : ffff0000fadd83c0
x3 : 0000ffffffffffff x2 : ffff800011b6a0d8
x1 : ffff800011b6a000 x0 : ffff80001130c9d8
Call trace:
el1_irq+0x78/0x180
printk+0x0/0x84
write_sysrq_trigger+0xb0/0x118
proc_reg_write+0xb4/0xe0
__vfs_write+0x18/0x40
vfs_write+0xb0/0x1b8
ksys_write+0x64/0xf0
__arm64_sys_write+0x14/0x20
el0_svc_common.constprop.2+0xb0/0x168
do_el0_svc+0x20/0x98
el0_sync_handler+0xec/0x1a8
el0_sync+0x140/0x180
[3]kdb>
After the patch:
Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry
[0]kdb> bp printk
Instruction(i) BP #0 at 0xffff8000101486cc (printk)
is enabled addr at ffff8000101486cc, hardtype=0 installed=0
[0]kdb> g
/ # echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc
[0]kdb> g
Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc
[0]kdb> ss
Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to SS trap @ 0xffff800010082ab8
[0]kdb>
Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support")
Signed-off-by: Wei Li <liwei391@huawei.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200509214159.19680-2-liwei391@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Continually butchering our entry code with CPU errata workarounds has
led to it looking a little scruffy. Consistently used /* */ comment
style for multi-line block comments and ensure that small numeric labels
use consecutive integers.
No functional change, but the state of things was irritating.
Signed-off-by: Will Deacon <will@kernel.org>
|
