| Age | Commit message (Collapse) | Author |
|---|
|
nr_pages is unsigned long but gets passed to rb_alloc_aux() as an int,
and is stored as an int.
Only power-of-2 values are accepted, so if nr_pages is a 64_bit value, it
will be passed to rb_alloc_aux() as zero.
That is not ideal because:
1. the value is incorrect
2. rb_alloc_aux() is at risk of misbehaving, although it manages to
return -ENOMEM in that case, it is a result of passing zero to get_order()
even though the get_order() result is documented to be undefined in that
case.
Fix by simply validating the maximum supported value in the first place.
Use -ENOMEM error code for consistency with the current error code that
is returned in that case.
Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-6-adrian.hunter@intel.com
|
|
perf_buffer->aux_nr_pages uses a 32-bit type, so a cast is needed to
calculate a 64-bit size.
Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-5-adrian.hunter@intel.com
|
|
Currently, perf allocates an array of page pointers which is limited in
size by MAX_PAGE_ORDER. That in turn limits the maximum Intel PT buffer
size to 2GiB. Should that limitation be lifted, the Intel PT driver can
support larger sizes, except for one calculation in
pt_topa_entry_for_page(), which is limited to 32-bits.
Fix pt_topa_entry_for_page() address calculation by adding a cast.
Fixes: 39152ee51b77 ("perf/x86/intel/pt: Get rid of reverse lookup table for ToPA")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-4-adrian.hunter@intel.com
|
|
topa_entry->base is a bit-field. Bit-fields are not promoted to a 64-bit
type, even if the underlying type is 64-bit, and so, if necessary, must
be cast to a larger type when calculations are done.
Fix a topa_entry->base address calculation by adding a cast.
Without the cast, the address was limited to 36-bits i.e. 64GiB.
The address calculation is used on systems that do not support Multiple
Entry ToPA (only Broadwell), and affects physical addresses on or above
64GiB. Instead of writing to the correct address, the address comprising
the first 36 bits would be written to.
Intel PT snapshot and sampling modes are not affected.
Fixes: 52ca9ced3f70 ("perf/x86/intel/pt: Add Intel PT PMU driver")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240624201101.60186-3-adrian.hunter@intel.com
|
|
topa_entry->base needs to store a pfn. It obviously needs to be
large enough to store the largest possible x86 pfn which is
MAXPHYADDR-PAGE_SIZE (52-12). So it is 4 bits too small.
Increase the size of topa_entry->base from 36 bits to 40 bits.
Note, systems where physical addresses can be 256TiB or more are affected.
[ Adrian: Amend commit message as suggested by Dave Hansen ]
Fixes: 52ca9ced3f70 ("perf/x86/intel/pt: Add Intel PT PMU driver")
Signed-off-by: Marco Cavenati <cavenati.marco@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240624201101.60186-2-adrian.hunter@intel.com
|
|
Unknown uncore PMON types can be found in both SPR and EMR with HBM or
CXL.
$ls /sys/devices/ | grep type
uncore_type_12_16
uncore_type_12_18
uncore_type_12_2
uncore_type_12_4
uncore_type_12_6
uncore_type_12_8
uncore_type_13_17
uncore_type_13_19
uncore_type_13_3
uncore_type_13_5
uncore_type_13_7
uncore_type_13_9
The unknown PMON types are HBM and CXL PMON. Except for the name, the
other information regarding the HBM and CXL PMON counters can be
retrieved via the discovery table. Add them into the uncores tables for
SPR and EMR.
The event config registers for all CXL related units are 8-byte apart.
Add SPR_UNCORE_MMIO_OFFS8_COMMON_FORMAT to specially handle it.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-9-kan.liang@linux.intel.com
|
|
The unit control and ID information are retrieved from the unit control
RB tree. No one uses the old structure anymore. Remove them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-8-kan.liang@linux.intel.com
|
|
The unit control RB tree has the unit control and unit ID information
for all the PCI units. Use them to replace the box_ctls/pci_offsets to
get an accurate unit control address for PCI uncore units.
The UPI/M3UPI units in the discovery table are ignored. Please see the
commit 65248a9a9ee1 ("perf/x86/uncore: Add a quirk for UPI on SPR").
Manually allocate a unit control RB tree for UPI/M3UPI.
Add cleanup_extra_boxes to release such manual allocation.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-7-kan.liang@linux.intel.com
|
|
The unit control RB tree has the unit control and unit ID information
for all the MSR units. Use them to replace the box_ctl and
uncore_msr_box_ctl() to get an accurate unit control address for MSR
uncore units.
Add intel_generic_uncore_assign_hw_event(), which utilizes the accurate
unit control address from the unit control RB tree to calculate the
config_base and event_base.
The unit id related information should be retrieved from the unit
control RB tree as well.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-6-kan.liang@linux.intel.com
|
|
The unit control RB tree has the unit control and unit ID information
for all the units. Use it to replace the box_ctls/mmio_offsets to get
an accurate unit control address for MMIO uncore units.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-5-kan.liang@linux.intel.com
|
|
The box_ids only save the unit ID for the first die. If a unit, e.g., a
CXL unit, doesn't exist in the first die. The unit ID cannot be
retrieved.
The unit control RB tree also stores the unit ID information.
Retrieve the unit ID from the unit control RB tree
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-4-kan.liang@linux.intel.com
|
|
The cpumask of some uncore units, e.g., CXL uncore units, may be wrong
under some configurations. Perf may access an uncore counter of a
non-existent uncore unit.
The uncore driver assumes that all uncore units are symmetric among
dies. A global cpumask is shared among all uncore PMUs. However, some
CXL uncore units may only be available on some dies.
A per PMU cpumask is introduced to track the CPU mask of this PMU.
The driver searches the unit control RB tree to check whether the PMU is
available on a given die, and updates the per PMU cpumask accordingly.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-3-kan.liang@linux.intel.com
|
|
The unit control address of some CXL units may be wrongly calculated
under some configuration on a EMR machine.
The current implementation only saves the unit control address of the
units from the first die, and the first unit of the rest of dies. Perf
assumed that the units from the other dies have the same offset as the
first die. So the unit control address of the rest of the units can be
calculated. However, the assumption is wrong, especially for the CXL
units.
Introduce an RB tree for each uncore type to save the unit control
address and three kinds of ID information (unit ID, PMU ID, and die ID)
for all units.
The unit ID is a physical ID of a unit.
The PMU ID is a logical ID assigned to a unit. The logical IDs start
from 0 and must be contiguous. The physical ID and the logical ID are
1:1 mapping. The units with the same physical ID in different dies share
the same PMU.
The die ID indicates which die a unit belongs to.
The RB tree can be searched by two different keys (unit ID or PMU ID +
die ID). During the RB tree setup, the unit ID is used as a key to look
up the RB tree. The perf can create/assign a proper PMU ID to the unit.
Later, after the RB tree is setup, PMU ID + die ID is used as a key to
look up the RB tree to fill the cpumask of a PMU. It's used more
frequently, so PMU ID + die ID is compared in the unit_less().
The uncore_find_unit() has to be O(N). But the RB tree setup only occurs
once during the driver load time. It should be acceptable.
Compared with the current implementation, more space is required to save
the information of all units. The extra size should be acceptable.
For example, on EMR, there are 221 units at most. For a 2-socket machine,
the extra space is ~6KB at most.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240614134631.1092359-2-kan.liang@linux.intel.com
|
|
Replace this pattern in events/amd/{un,}core.c:
cmpxchg(*ptr, old, new) == old
... with the simpler and faster:
try_cmpxchg(*ptr, &old, new)
The x86 CMPXCHG instruction returns success in the ZF flag, so this change
saves a compare after the CMPXCHG.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240425101708.5025-1-ubizjak@gmail.com
|
|
Use of this structure was removed in:
8f2a28c5859b ("perf/x86/cstate: Use new probe function")
Remove the now stale type as well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
AMD CPUs have the scope of RAPL energy-pkg event as package, whereas
Intel Cascade Lake CPUs have the scope as die.
To account for the difference in the energy-pkg event scope between AMD
and Intel CPUs, give more generic and semantically correct names to the
maxdie and dieid variables.
No functional change.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240502095115.177713-2-Dhananjay.Ugwekar@amd.com
|
|
We are going to fix perf-events fallout of changes in tip:x86/cpu,
so merge in that branch first.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
To support APX functionality, the EVEX prefix is used to:
- promote legacy instructions
- promote VEX instructions
- add new instructions
Promoted VEX instructions require no extra annotation because the opcodes
do not change and the permissive nature of the instruction decoder already
allows them to have an EVEX prefix.
Promoted legacy instructions and new instructions are placed in map 4 which
has not been used before.
Create a new table for map 4 and add APX instructions.
Annotate SCALABLE instructions with "(es)" - refer to patch "x86/insn: Add
support for APX EVEX to the instruction decoder logic". SCALABLE
instructions must be represented in both no-prefix (NP) and 66 prefix
forms.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-9-adrian.hunter@intel.com
|
|
Intel Advanced Performance Extensions (APX) extends the EVEX prefix to
support:
- extended general purpose registers (EGPRs) i.e. r16 to r31
- Push-Pop Acceleration (PPX) hints
- new data destination (NDD) register
- suppress status flags writes (NF) of common instructions
- new instructions
Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture
Specification for details.
The extended EVEX prefix does not need amended instruction decoder logic,
except in one area. Some instructions are defined as SCALABLE which means
the EVEX.W bit and EVEX.pp bits are used to determine operand size.
Specifically, if an instruction is SCALABLE and EVEX.W is zero, then
EVEX.pp value 0 (representing no prefix NP) means default operand size,
whereas EVEX.pp value 1 (representing 66 prefix) means operand size
override i.e. 16 bits
Add an attribute (INAT_EVEX_SCALABLE) to identify such instructions, and
amend the logic appropriately.
Amend the awk script that generates the attribute tables from the opcode
map, to recognise "(es)" as attribute INAT_EVEX_SCALABLE.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-8-adrian.hunter@intel.com
|
|
opcode map
Support for REX2 has been added to the instruction decoder logic and the
awk script that generates the attribute tables from the opcode map.
Add REX2 prefix byte (0xD5) to the opcode map.
Add annotation (!REX2) for map 0/1 opcodes that are reserved under REX2.
Add JMPABS to the opcode map and add annotation (REX2) to identify that it
has a mandatory REX2 prefix. A separate opcode attribute table is not
needed at this time because JMPABS has the same attribute encoding as the
MOV instruction that it shares an opcode with i.e. INAT_MOFFSET.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-7-adrian.hunter@intel.com
|
|
Intel Advanced Performance Extensions (APX) uses a new 2-byte prefix named
REX2 to select extended general purpose registers (EGPRs) i.e. r16 to r31.
The REX2 prefix is effectively an extended version of the REX prefix.
REX2 and EVEX are also used with PUSH/POP instructions to provide a
Push-Pop Acceleration (PPX) hint. With PPX hints, a CPU will attempt to
fast-forward register data between matching PUSH and POP instructions.
REX2 is valid only with opcodes in maps 0 and 1. Similar extension for
other maps is provided by the EVEX prefix, covered in a separate patch.
Some opcodes in maps 0 and 1 are reserved under REX2. One of these is used
for a new 64-bit absolute direct jump instruction JMPABS.
Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture
Specification for details.
Define a code value for the REX2 prefix (INAT_PFX_REX2), and add attribute
flags for opcodes reserved under REX2 (INAT_NO_REX2) and to identify
opcodes (only JMPABS) that require a mandatory REX2 prefix
(INAT_REX2_VARIANT).
Amend logic to read the REX2 prefix and get the opcode attribute for the
map number (0 or 1) encoded in the REX2 prefix.
Amend the awk script that generates the attribute tables from the opcode
map, to recognise "REX2" as attribute INAT_PFX_REX2, and "(!REX2)"
as attribute INAT_NO_REX2, and "(REX2)" as attribute INAT_REX2_VARIANT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-6-adrian.hunter@intel.com
|
|
The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.
Add instructions documented in Intel Architecture Instruction Set
Extensions and Future Features Programming Reference March 2024
319433-052, that have not been added yet:
AADD
AAND
AOR
AXOR
CMPccXADD
PBNDKB
RDMSRLIST
URDMSR
UWRMSR
VBCSTNEBF162PS
VBCSTNESH2PS
VCVTNEEBF162PS
VCVTNEEPH2PS
VCVTNEOBF162PS
VCVTNEOPH2PS
VCVTNEPS2BF16
VPDPB[SU,UU,SS]D[,S]
VPDPW[SU,US,UU]D[,S]
VPMADD52HUQ
VPMADD52LUQ
VSHA512MSG1
VSHA512MSG2
VSHA512RNDS2
VSM3MSG1
VSM3MSG2
VSM3RNDS2
VSM4KEY4
VSM4RNDS4
WRMSRLIST
TCMMIMFP16PS
TCMMRLFP16PS
TDPFP16PS
PREFETCHIT1
PREFETCHIT0
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-5-adrian.hunter@intel.com
|
|
The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.
Intel Architecture Instruction Set Extensions and Future Features manual
number 319433-044 of May 2021, documented VEX versions of instructions
VPDPBUSD, VPDPBUSDS, VPDPWSSD and VPDPWSSDS, but the opcode map has them
listed as EVEX only.
Remove EVEX-only (ev) annotation from instructions VPDPBUSD, VPDPBUSDS,
VPDPWSSD and VPDPWSSDS, which allows them to be decoded with either a VEX
or EVEX prefix.
Fixes: 0153d98f2dd6 ("x86/insn: Add misc instructions to x86 instruction decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-4-adrian.hunter@intel.com
|
|
The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.
Opcode 0x68 PUSH instruction is currently defined as 64-bit operand size
only i.e. (d64). That was based on Intel SDM Opcode Map. However that is
contradicted by the Instruction Set Reference section for PUSH in the
same manual.
Remove 64-bit operand size only annotation from opcode 0x68 PUSH
instruction.
Example:
$ cat pushw.s
.global _start
.text
_start:
pushw $0x1234
mov $0x1,%eax # system call number (sys_exit)
int $0x80
$ as -o pushw.o pushw.s
$ ld -s -o pushw pushw.o
$ objdump -d pushw | tail -4
0000000000401000 <.text>:
401000: 66 68 34 12 pushw $0x1234
401004: b8 01 00 00 00 mov $0x1,%eax
401009: cd 80 int $0x80
$ perf record -e intel_pt//u ./pushw
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB perf.data ]
Before:
$ perf script --insn-trace=disasm
Warning:
1 instruction trace errors
pushw 10349 [000] 10586.869237014: 401000 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) pushw $0x1234
pushw 10349 [000] 10586.869237014: 401006 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb %al, (%rax)
pushw 10349 [000] 10586.869237014: 401008 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb %cl, %ch
pushw 10349 [000] 10586.869237014: 40100a [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb $0x2e, (%rax)
instruction trace error type 1 time 10586.869237224 cpu 0 pid 10349 tid 10349 ip 0x40100d code 6: Trace doesn't match instruction
After:
$ perf script --insn-trace=disasm
pushw 10349 [000] 10586.869237014: 401000 [unknown] (./pushw) pushw $0x1234
pushw 10349 [000] 10586.869237014: 401004 [unknown] (./pushw) movl $1, %eax
Fixes: eb13296cfaf6 ("x86: Instruction decoder API")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-3-adrian.hunter@intel.com
|
|
The x86 instruction decoder needs to know these new instructions that
are going to be used in the crypto library as well as the x86 core
code. Add the following:
LOADIWKEY:
Load a CPU-internal wrapping key.
ENCODEKEY128:
Wrap a 128-bit AES key to a key handle.
ENCODEKEY256:
Wrap a 256-bit AES key to a key handle.
AESENC128KL:
Encrypt a 128-bit block of data using a 128-bit AES key
indicated by a key handle.
AESENC256KL:
Encrypt a 128-bit block of data using a 256-bit AES key
indicated by a key handle.
AESDEC128KL:
Decrypt a 128-bit block of data using a 128-bit AES key
indicated by a key handle.
AESDEC256KL:
Decrypt a 128-bit block of data using a 256-bit AES key
indicated by a key handle.
AESENCWIDE128KL:
Encrypt 8 128-bit blocks of data using a 128-bit AES key
indicated by a key handle.
AESENCWIDE256KL:
Encrypt 8 128-bit blocks of data using a 256-bit AES key
indicated by a key handle.
AESDECWIDE128KL:
Decrypt 8 128-bit blocks of data using a 128-bit AES key
indicated by a key handle.
AESDECWIDE256KL:
Decrypt 8 128-bit blocks of data using a 256-bit AES key
indicated by a key handle.
The detail can be found in Intel Software Developer Manual.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240502105853.5338-2-adrian.hunter@intel.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
New CPU #defines encode vendor and family as well as model.
[ dhansen: vertically align 0's in invlpg_miss_ids[] ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181518.41946-1-tony.luck%40intel.com
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181518.41927-1-tony.luck%40intel.com
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181517.41907-1-tony.luck%40intel.com
|
|
New CPU #defines encode vendor and family as well as model.
[ dhansen: vertically align macro and remove stray subject / ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181516.41887-1-tony.luck%40intel.com
|
|
New CPU #defines encode vendor and family as well as model.
[ bp: Squash two resctrl patches into one. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181514.41848-1-tony.luck%40intel.com
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181513.41829-1-tony.luck%40intel.com
|
|
New CPU #defines encode vendor and family as well as model.
[ bp: Squash *three* mce patches into one, fold in fix:
https://lore.kernel.org/r/20240429022051.63360-1-tony.luck@intel.com ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181511.41772-1-tony.luck%40intel.com
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181511.41753-1-tony.luck%40intel.com
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181510.41733-1-tony.luck%40intel.com
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181505.41654-1-tony.luck%40intel.com
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181504.41634-1-tony.luck%40intel.com
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181503.41614-1-tony.luck%40intel.com
|
|
New CPU #defines encode vendor and family as well as model.
[ bp: Squash *three* uncore patches into one. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181501.41557-1-tony.luck%40intel.com
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix EEVDF corner cases
- Fix two nohz_full= related bugs that can cause boot crashes
and warnings
* tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
sched/isolation: Prevent boot crash when the boot CPU is nohz_full
sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()
sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr
sched/eevdf: Always update V if se->on_rq when reweighting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Make the CPU_MITIGATIONS=n interaction with conflicting
mitigation-enabling boot parameters a bit saner.
- Re-enable CPU mitigations by default on non-x86
- Fix TDX shared bit propagation on mprotect()
- Fix potential show_regs() system hang when PKE initialization
is not fully finished yet.
- Add the 0x10-0x1f model IDs to the Zen5 range
- Harden #VC instruction emulation some more
* tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n
cpu: Re-enable CPU mitigations by default for !X86 architectures
x86/tdx: Preserve shared bit on mprotect()
x86/cpu: Fix check for RDPKRU in __show_regs()
x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range
x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix a double free bug in the init error path of the GICv3 irqchip
driver"
* tag 'irq-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Prevent double free on error
|
|
housekeeping_setup() checks cpumask_intersects(present, online) to ensure
that the kernel will have at least one housekeeping CPU after smp_init(),
but this doesn't work if the maxcpus= kernel parameter limits the number of
processors available after bootup.
For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at
boot time on a virtual machine with 4 CPUs.
Change housekeeping_setup() to use cpumask_first_and() and check that the
returned CPU number is valid and less than setup_max_cpus.
Another corner case is "nohz_full=0" on a machine with a single CPU or with
the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty
and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the
WARN_ON(tick_nohz_full_running) in tick_sched_do_timer().
And how should the kernel interpret the "nohz_full=" parameter? It should
be silently ignored, but currently cpulist_parse() happily returns the
empty cpumask and this leads to the same problem.
Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask)
and do nothing in this case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240413141746.GA10008@redhat.com
|
|
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:
08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full").
However after:
aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.
Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.
This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.
There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).
Fixes: aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/
|
|
Pull Rust fixes from Miguel Ojeda:
- Soundness: make internal functions generated by the 'module!' macro
inaccessible, do not implement 'Zeroable' for 'Infallible' and
require 'Send' for the 'Module' trait.
- Build: avoid errors with "empty" files and workaround 'rustdoc' ICE.
- Kconfig: depend on '!CFI_CLANG' and avoid selecting 'CONSTRUCTORS'.
- Code docs: remove non-existing key from 'module!' macro example.
- Docs: trivial rendering fix in arch table.
* tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux:
rust: remove `params` from `module` macro example
kbuild: rust: force `alloc` extern to allow "empty" Rust files
kbuild: rust: remove unneeded `@rustc_cfg` to avoid ICE
rust: kernel: require `Send` for `Module` implementations
rust: phy: implement `Send` for `Registration`
rust: make mutually exclusive with CFI_CLANG
rust: macros: fix soundness issue in `module!` macro
rust: init: remove impl Zeroable for Infallible
docs: rust: fix improper rendering in Arch Support page
rust: don't select CONSTRUCTORS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
separation
- A fix to avoid loading rv64/NOMMU kernel past the start of RAM
- A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
overflow in the bitmask
- The sud_test kselftest has been fixed to properly swizzle the syscall
number into the return register, which are not the same on RISC-V
- A fix for a build warning in the perf tools on rv32
- A fix for the CBO selftests, to avoid non-constants leaking into the
inline asm
- A pair of fixes for T-Head PBMT errata probing, which has been
renamed MAE by the vendor
* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
perf riscv: Fix the warning due to the incompatible type
riscv: T-Head: Test availability bit before enabling MAE errata
riscv: thead: Rename T-Head PBMT to MAE
selftests: sud_test: return correct emulated syscall value on RISC-V
riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
|
|
Pull smb client fixes from Steve French:
"Three smb3 client fixes, all also for stable:
- two small locking fixes spotted by Coverity
- FILE_ALL_INFO and network_open_info packing fix"
* tag '6.9-rc5-cifs-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix lock ordering potential deadlock in cifs_sync_mid_result
smb3: missing lock when picking channel
smb: client: Fix struct_group() usage in __packed structs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fix a race condition in the at24 eeprom handler, a NULL pointer
exception in the I2C core for controllers only using target modes,
drop a MAINTAINERS entry, and fix an incorrect DT binding for at24"
* tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: fix NULL function pointer dereference
MAINTAINERS: Drop entry for PCA9541 bus master selector
eeprom: at24: fix memory corruption race condition
dt-bindings: eeprom: at24: Fix ST M24C64-D compatible schema
|
|
create_prof_cpu_mask() is no longer used after commit 1f44a225777e ("s390:
convert interrupt handling to use generic hardirq").
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
