summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-26mptcp: update mptcp ack sequence from work queueFlorian Westphal
If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26mptcp: add work queue skeletonPaolo Abeni
Will be extended with functionality in followup patches. Initial user is moving skbs from subflows receive queue to the mptcp-level receive queue. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26mptcp: add and use mptcp_data_ready helperFlorian Westphal
allows us to schedule the work queue to drain the ssk receive queue in a followup patch. This is needed to avoid sending all-to-pessimistic mptcp-level acknowledgements. At this time, the ack_seq is what was last read by userspace instead of the highest in-sequence number queued for reading. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26Merge branch 'mlxsw-Small-driver-update'David S. Miller
Jiri Pirko says: ==================== mlxsw: Small driver update This patchset contains couple of patches not related to each other. They are small optimization and extension changes to the driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26mlxsw: spectrum: Add mlxsw_sp_span_ops.buffsize_get for Spectrum-3Petr Machata
The buffer factor on Spectrum-3 is larger than on Spectrum-2. Add a new callback and use it for mlxsw_sp->span_ops on Spectrum-3. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26mlxsw: spectrum: Initialize advertised speeds to supported speedsIdo Schimmel
During port initialization the driver instructs the device to only advertise speeds that can be supported by the port's current width. Since the device now returns the supported speeds based on the port's current width, the driver no longer needs to compute the speeds that can be advertised. Simplify port initialization by setting the advertised speeds to the queried supported speeds. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26mlxsw: spectrum: Move the ECN-marked packet counter to ethtoolPetr Machata
Spectrum-1 and Spectrum-2 do not have a per-TC counter of number of packets marked by ECN. The value reported currently is the total number of marked packets. Showing this value at individual TC Qdiscs is misleading. Move the counter to ethtool instead. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26mlxsw: spectrum_switchdev: Optimize SFN records processingJiri Pirko
Currently, only one SFN query is done from repetitive work at a time, processing 64 entries. Another work iteration is scheduled in 100ms, that means that the max rate of learned FDB entries is limited to 6400/s. That is slow. Fix this by doing 2 optimizations: 1) Run 10 SFN queries at a time. 2) In case the SFN is not drained, schedule work with 0 delay to allow to continue processing rest of the records. On a testing setup with 500K entries the time to process decreased from 870secs to 10secs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: phy: corrected the return value for genphy_check_and_restart_aneg and ↵Sudheesh Mavila
genphy_c45_check_and_restart_aneg When auto-negotiation is not required, return value should be zero. Changes v1->v2: - improved comments and code as Andrew Lunn and Heiner Kallweit suggestion - fixed issue in genphy_c45_check_and_restart_aneg as Russell King suggestion. Fixes: 2a10ab043ac5 ("net: phy: add genphy_check_and_restart_aneg()") Fixes: 1af9f16840e9 ("net: phy: add genphy_c45_check_and_restart_aneg()") Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26af_llc: fix if-statement empty body warningRandy Dunlap
When debugging via dprintk() is not enabled, make the dprintk() macro be an empty do-while loop, as is done in <linux/sunrpc/debug.h>. This fixes a gcc warning when -Wextra is set: ../net/llc/af_llc.c:974:51: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] I have verified that there is not object code change (with gcc 7.5.0). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26slip: not call free_netdev before rtnl_unlock in slip_openyangerkun
As the description before netdev_run_todo, we cannot call free_netdev before rtnl_unlock, fix it by reorder the code. Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26Merge tag 'mlx5-updates-2020-02-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-02-25 The following series provides some misc updates to mlx5 driver: 1) From Maxim, Refactoring for mlx5e netdev channels recreation flow. - Add error handling - Add context to the preactivate hook - Use preactivate hook with context where it can be used and subsequently unify channel recreation flow everywhere. - Fix XPS cpumask to not reset upon channel recreation. 2) From Tariq: - Use indirect calls wrapper on RX. - Check LRO capability bit 3) Multiple small cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26Merge branch 'net-smc-improve-peer-ID-in-CLC-decline'David S. Miller
Hans Wippel says: ==================== net/smc: improve peer ID in CLC decline The following two patches improve the peer ID in CLC decline messages if RoCE devices are present in the host but no suitable device is found for a connection. The first patch reworks the peer ID initialization. The second patch contains the actual changes of the CLC decline messages. Changes v1 -> v2: * make smc_ib_is_valid_local_systemid() static in first patch * changed if in smc_clc_send_decline() to remove curly braces Changes RFC -> v1: * split the patch into two parts * removed zero assignment to global variable (thanks Leon) Thanks to Leon Romanovsky and Karsten Graul for the feedback! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net/smc: improve peer ID in CLC decline for SMC-RHans Wippel
According to RFC 7609, all CLC messages contain a peer ID that consists of a unique instance ID and the MAC address of one of the host's RoCE devices. But if a SMC-R connection cannot be established, e.g., because no matching pnet table entry is found, the current implementation uses a zero value in the CLC decline message although the host's peer ID is set to a proper value. If no RoCE and no ISM device is usable for a connection, there is no LGR and the LGR check in smc_clc_send_decline() prevents that the peer ID is copied into the CLC decline message for both SMC-D and SMC-R. So, this patch modifies the check to also accept the case of no LGR. Also, only a valid peer ID is copied into the decline message. Signed-off-by: Hans Wippel <ndev@hwipl.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net/smc: rework peer ID handlingHans Wippel
This patch initializes the peer ID to a random instance ID and a zero MAC address. If a RoCE device is in the host, the MAC address part of the peer ID is overwritten with the respective address. Also, a function for checking if the peer ID is valid is added. A peer ID is considered valid if the MAC address part contains a non-zero MAC address. Signed-off-by: Hans Wippel <ndev@hwipl.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26tcp-zerocopy: Update returned getsockopt() optlen.Arjun Roy
TCP receive zerocopy currently does not update the returned optlen for getsockopt() if the user passed in a larger than expected value. Thus, userspace cannot properly determine if all the fields are set in the passed-in struct. This patch sets the optlen for this case before returning, in keeping with the expected operation of getsockopt(). Fixes: c8856c051454 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.") Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26ipv6: restrict IPV6_ADDRFORM operationEric Dumazet
IPV6_ADDRFORM is able to transform IPv6 socket to IPv4 one. While this operation sounds illogical, we have to support it. One of the things it does for TCP socket is to switch sk->sk_prot to tcp_prot. We now have other layers playing with sk->sk_prot, so we should make sure to not interfere with them. This patch makes sure sk_prot is the default pointer for TCP IPv6 socket. syzbot reported : BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD a0113067 P4D a0113067 PUD a8771067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 0 PID: 10686 Comm: syz-executor.0 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Bad RIP value. RSP: 0018:ffffc9000281fce0 EFLAGS: 00010246 RAX: 1ffffffff15f48ac RBX: ffffffff8afa4560 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880a69a8f40 RBP: ffffc9000281fd10 R08: ffffffff86ed9b0c R09: ffffed1014d351f5 R10: ffffed1014d351f5 R11: 0000000000000000 R12: ffff8880920d3098 R13: 1ffff1101241a613 R14: ffff8880a69a8f40 R15: 0000000000000000 FS: 00007f2ae75db700(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000a3b85000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: inet_release+0x165/0x1c0 net/ipv4/af_inet.c:427 __sock_release net/socket.c:605 [inline] sock_close+0xe1/0x260 net/socket.c:1283 __fput+0x2e4/0x740 fs/file_table.c:280 ____fput+0x15/0x20 fs/file_table.c:313 task_work_run+0x176/0x1b0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop arch/x86/entry/common.c:164 [inline] prepare_exit_to_usermode+0x480/0x5b0 arch/x86/entry/common.c:195 syscall_return_slowpath+0x113/0x4a0 arch/x86/entry/common.c:278 do_syscall_64+0x11f/0x1c0 arch/x86/entry/common.c:304 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45c429 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2ae75dac78 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: 0000000000000000 RBX: 00007f2ae75db6d4 RCX: 000000000045c429 RDX: 0000000000000001 RSI: 000000000000011a RDI: 0000000000000004 RBP: 000000000076bf20 R08: 0000000000000038 R09: 0000000000000000 R10: 0000000020000180 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000a9d R14: 00000000004ccfb4 R15: 000000000076bf2c Modules linked in: CR2: 0000000000000000 ---[ end trace 82567b5207e87bae ]--- RIP: 0010:0x0 Code: Bad RIP value. RSP: 0018:ffffc9000281fce0 EFLAGS: 00010246 RAX: 1ffffffff15f48ac RBX: ffffffff8afa4560 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880a69a8f40 RBP: ffffc9000281fd10 R08: ffffffff86ed9b0c R09: ffffed1014d351f5 R10: ffffed1014d351f5 R11: 0000000000000000 R12: ffff8880920d3098 R13: 1ffff1101241a613 R14: ffff8880a69a8f40 R15: 0000000000000000 FS: 00007f2ae75db700(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000a3b85000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+1938db17e275e85dc328@syzkaller.appspotmail.com Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net/smc: fix cleanup for linkgroup setup failuresUrsula Braun
If an SMC connection to a certain peer is setup the first time, a new linkgroup is created. In case of setup failures, such a linkgroup is unusable and should disappear. As a first step the linkgroup is removed from the linkgroup list in smc_lgr_forget(). There are 2 problems: smc_listen_decline() might be called before linkgroup creation resulting in a crash due to calling smc_lgr_forget() with parameter NULL. If a setup failure occurs after linkgroup creation, the connection is never unregistered from the linkgroup, preventing linkgroup freeing. This patch introduces an enhanced smc_lgr_cleanup_early() function which * contains a linkgroup check for early smc_listen_decline() invocations * invokes smc_conn_free() to guarantee unregistering of the connection. * schedules fast linkgroup removal of the unusable linkgroup And the unused function smcd_conn_free() is removed from smc_core.h. Fixes: 3b2dec2603d5b ("net/smc: restructure client and server code in af_smc") Fixes: 2a0674fffb6bc ("net/smc: improve abnormal termination of link groups") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26Merge branch 'net-fix-sysfs-permssions-when-device-changes-network'David S. Miller
Christian Brauner says: ==================== net: fix sysfs permssions when device changes network /* v7 */ This is v7 with a build warning fixup that slipped past me the last time. It removes to unused variables in sysfs_group_change_owner(). I observed no warning when building just now. /* v6 */ This is v6 with two small fixups. I missed adapting the commit message to reflect the renamed helper for changing the owner of sysfs files and I also forgot to make the new dpm helper static inline. /* v5 */ This is v5 with a small fixup requested by Rafael. /* v4 */ This is v4 with more documentation and other fixes that Greg requested. /* v3 */ This is v3 with explicit uid and gid parameters added to functions that change sysfs object ownership as Greg requested. (I've tagged this with net-next since it's triggered by a bug for network device files but it also touches driver core aspects so it's not clear-cut. I can of course split this series into separate patchsets.) We have been struggling with a bug surrounding the ownership of network device sysfs files when moving network devices between network namespaces owned by different user namespaces reported by multiple users. Currently, when moving network devices between network namespaces the ownership of the corresponding sysfs entries is not changed. This leads to problems when tools try to operate on the corresponding sysfs files. I also causes a bug when creating a network device in a network namespaces owned by a user namespace and moving that network device back to the host network namespaces. Because when a network device is created in a network namespaces it will be owned by the root user of the user namespace and all its associated sysfs files will also be owned by the root user of the corresponding user namespace. If such a network device has to be moved back to the host network namespace the permissions will still be set to the root user of the owning user namespaces of the originating network namespace. This means unprivileged users can e.g. re-trigger uevents for such incorrectly owned devices on the host or in other network namespaces. They can also modify the settings of the device itself through sysfs when they wouldn't be able to do the same through netlink. Both of these things are unwanted. For example, quite a few workloads will create network devices in the host network namespace. Other tools will then proceed to move such devices between network namespaces owner by other user namespaces. While the ownership of the device itself is updated in net/core/net-sysfs.c:dev_change_net_namespace() the corresponding sysfs entry for the device is not. Below you'll find that moving a network device (here a veth device) from a network namespace into another network namespaces owned by a different user namespace with a different id mapping. As you can see the permissions are wrong even though it is owned by the userns root user after it has been moved and can be interacted with through netlink: drwxr-xr-x 5 nobody nobody 0 Jan 25 18:08 . drwxr-xr-x 9 nobody nobody 0 Jan 25 18:08 .. -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 addr_assign_type -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 addr_len -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 address -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 broadcast -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_changes -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_down_count -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_up_count -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dev_id -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dev_port -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dormant -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 duplex -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 flags -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 gro_flush_timeout -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 ifalias -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 ifindex -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 iflink -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 link_mode -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 mtu -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 name_assign_type -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 netdev_group -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 operstate -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_port_id -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_port_name -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_switch_id drwxr-xr-x 2 nobody nobody 0 Jan 25 18:09 power -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 proto_down drwxr-xr-x 4 nobody nobody 0 Jan 25 18:09 queues -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 speed drwxr-xr-x 2 nobody nobody 0 Jan 25 18:09 statistics lrwxrwxrwx 1 nobody nobody 0 Jan 25 18:08 subsystem -> ../../../../class/net -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 tx_queue_len -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 type -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:08 uevent Constrast this with creating a device of the same type in the network namespace directly. In this case the device's sysfs permissions will be correctly updated. (Please also note, that in a lot of workloads this strategy of creating the network device directly in the network device to workaround this issue can not be used. Either because the network device is dedicated after it has been created or because it used by a process that is heavily sandboxed and couldn't create network devices itself.): drwxr-xr-x 5 root root 0 Jan 25 18:12 . drwxr-xr-x 9 nobody nobody 0 Jan 25 18:08 .. -r--r--r-- 1 root root 4096 Jan 25 18:12 addr_assign_type -r--r--r-- 1 root root 4096 Jan 25 18:12 addr_len -r--r--r-- 1 root root 4096 Jan 25 18:12 address -r--r--r-- 1 root root 4096 Jan 25 18:12 broadcast -rw-r--r-- 1 root root 4096 Jan 25 18:12 carrier -r--r--r-- 1 root root 4096 Jan 25 18:12 carrier_changes -r--r--r-- 1 root root 4096 Jan 25 18:12 carrier_down_count -r--r--r-- 1 root root 4096 Jan 25 18:12 carrier_up_count -r--r--r-- 1 root root 4096 Jan 25 18:12 dev_id -r--r--r-- 1 root root 4096 Jan 25 18:12 dev_port -r--r--r-- 1 root root 4096 Jan 25 18:12 dormant -r--r--r-- 1 root root 4096 Jan 25 18:12 duplex -rw-r--r-- 1 root root 4096 Jan 25 18:12 flags -rw-r--r-- 1 root root 4096 Jan 25 18:12 gro_flush_timeout -rw-r--r-- 1 root root 4096 Jan 25 18:12 ifalias -r--r--r-- 1 root root 4096 Jan 25 18:12 ifindex -r--r--r-- 1 root root 4096 Jan 25 18:12 iflink -r--r--r-- 1 root root 4096 Jan 25 18:12 link_mode -rw-r--r-- 1 root root 4096 Jan 25 18:12 mtu -r--r--r-- 1 root root 4096 Jan 25 18:12 name_assign_type -rw-r--r-- 1 root root 4096 Jan 25 18:12 netdev_group -r--r--r-- 1 root root 4096 Jan 25 18:12 operstate -r--r--r-- 1 root root 4096 Jan 25 18:12 phys_port_id -r--r--r-- 1 root root 4096 Jan 25 18:12 phys_port_name -r--r--r-- 1 root root 4096 Jan 25 18:12 phys_switch_id drwxr-xr-x 2 root root 0 Jan 25 18:12 power -rw-r--r-- 1 root root 4096 Jan 25 18:12 proto_down drwxr-xr-x 4 root root 0 Jan 25 18:12 queues -r--r--r-- 1 root root 4096 Jan 25 18:12 speed drwxr-xr-x 2 root root 0 Jan 25 18:12 statistics lrwxrwxrwx 1 nobody nobody 0 Jan 25 18:12 subsystem -> ../../../../class/net -rw-r--r-- 1 root root 4096 Jan 25 18:12 tx_queue_len -r--r--r-- 1 root root 4096 Jan 25 18:12 type -rw-r--r-- 1 root root 4096 Jan 25 18:12 uevent Now, when creating a network device in a network namespace owned by a user namespace and moving it to the host the permissions will be set to the id that the user namespace root user has been mapped to on the host leading to all sorts of permission issues mentioned above: 458752 drwxr-xr-x 5 458752 458752 0 Jan 25 18:12 . drwxr-xr-x 9 root root 0 Jan 25 18:08 .. -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 addr_assign_type -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 addr_len -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 address -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 broadcast -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 carrier -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 carrier_changes -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 carrier_down_count -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 carrier_up_count -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 dev_id -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 dev_port -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 dormant -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 duplex -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 flags -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 gro_flush_timeout -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 ifalias -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 ifindex -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 iflink -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 link_mode -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 mtu -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 name_assign_type -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 netdev_group -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 operstate -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 phys_port_id -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 phys_port_name -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 phys_switch_id drwxr-xr-x 2 458752 458752 0 Jan 25 18:12 power -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 proto_down drwxr-xr-x 4 458752 458752 0 Jan 25 18:12 queues -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 speed drwxr-xr-x 2 458752 458752 0 Jan 25 18:12 statistics lrwxrwxrwx 1 root root 0 Jan 25 18:12 subsystem -> ../../../../class/net -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 tx_queue_len -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 type -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 uevent Fix this by changing the basic sysfs files associated with network devices when moving them between network namespaces. To this end we add some infrastructure to sysfs. The patchset takes care to only do this when the owning user namespaces changes and the kids differ. So there's only a performance overhead, when the owning user namespace of the network namespace is different __and__ the kid mappings for the root user are different for the two user namespaces: Assume we have a netdev eth0 which we create in netns1 owned by userns1. userns1 has an id mapping of 0 100000 100000. Now we move eth0 into netns2 which is owned by userns2 which also defines an id mapping of 0 100000 100000. In this case sysfs doesn't need updating. The patch will handle this case and not do any needless work. Now assume eth0 is moved into netns3 which is owned by userns3 which defines an id mapping of 0 123456 65536. In this case the root user in each namespace corresponds to different kid and sysfs needs updating. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: fix sysfs permssions when device changes network namespaceChristian Brauner
Now that we moved all the helpers in place and make use netdev_change_owner() to fixup the permissions when moving network devices between network namespaces. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net-sysfs: add queue_change_owner()Christian Brauner
Add a function to change the owner of the queue entries for a network device when it is moved between network namespaces. Currently, when moving network devices between network namespaces the ownership of the corresponding queue sysfs entries are not changed. This leads to problems when tools try to operate on the corresponding sysfs files. Fix this. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net-sysfs: add netdev_change_owner()Christian Brauner
Add a function to change the owner of a network device when it is moved between network namespaces. Currently, when moving network devices between network namespaces the ownership of the corresponding sysfs entries is not changed. This leads to problems when tools try to operate on the corresponding sysfs files. This leads to a bug whereby a network device that is created in a network namespaces owned by a user namespace will have its corresponding sysfs entry owned by the root user of the corresponding user namespace. If such a network device has to be moved back to the host network namespace the permissions will still be set to the user namespaces. This means unprivileged users can e.g. trigger uevents for such incorrectly owned devices. They can also modify the settings of the device itself. Both of these things are unwanted. For example, workloads will create network devices in the host network namespace. Other tools will then proceed to move such devices between network namespaces owner by other user namespaces. While the ownership of the device itself is updated in net/core/net-sysfs.c:dev_change_net_namespace() the corresponding sysfs entry for the device is not: drwxr-xr-x 5 nobody nobody 0 Jan 25 18:08 . drwxr-xr-x 9 nobody nobody 0 Jan 25 18:08 .. -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 addr_assign_type -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 addr_len -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 address -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 broadcast -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_changes -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_down_count -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_up_count -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dev_id -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dev_port -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dormant -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 duplex -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 flags -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 gro_flush_timeout -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 ifalias -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 ifindex -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 iflink -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 link_mode -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 mtu -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 name_assign_type -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 netdev_group -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 operstate -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_port_id -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_port_name -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_switch_id drwxr-xr-x 2 nobody nobody 0 Jan 25 18:09 power -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 proto_down drwxr-xr-x 4 nobody nobody 0 Jan 25 18:09 queues -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 speed drwxr-xr-x 2 nobody nobody 0 Jan 25 18:09 statistics lrwxrwxrwx 1 nobody nobody 0 Jan 25 18:08 subsystem -> ../../../../class/net -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 tx_queue_len -r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 type -rw-r--r-- 1 nobody nobody 4096 Jan 25 18:08 uevent However, if a device is created directly in the network namespace then the device's sysfs permissions will be correctly updated: drwxr-xr-x 5 root root 0 Jan 25 18:12 . drwxr-xr-x 9 nobody nobody 0 Jan 25 18:08 .. -r--r--r-- 1 root root 4096 Jan 25 18:12 addr_assign_type -r--r--r-- 1 root root 4096 Jan 25 18:12 addr_len -r--r--r-- 1 root root 4096 Jan 25 18:12 address -r--r--r-- 1 root root 4096 Jan 25 18:12 broadcast -rw-r--r-- 1 root root 4096 Jan 25 18:12 carrier -r--r--r-- 1 root root 4096 Jan 25 18:12 carrier_changes -r--r--r-- 1 root root 4096 Jan 25 18:12 carrier_down_count -r--r--r-- 1 root root 4096 Jan 25 18:12 carrier_up_count -r--r--r-- 1 root root 4096 Jan 25 18:12 dev_id -r--r--r-- 1 root root 4096 Jan 25 18:12 dev_port -r--r--r-- 1 root root 4096 Jan 25 18:12 dormant -r--r--r-- 1 root root 4096 Jan 25 18:12 duplex -rw-r--r-- 1 root root 4096 Jan 25 18:12 flags -rw-r--r-- 1 root root 4096 Jan 25 18:12 gro_flush_timeout -rw-r--r-- 1 root root 4096 Jan 25 18:12 ifalias -r--r--r-- 1 root root 4096 Jan 25 18:12 ifindex -r--r--r-- 1 root root 4096 Jan 25 18:12 iflink -r--r--r-- 1 root root 4096 Jan 25 18:12 link_mode -rw-r--r-- 1 root root 4096 Jan 25 18:12 mtu -r--r--r-- 1 root root 4096 Jan 25 18:12 name_assign_type -rw-r--r-- 1 root root 4096 Jan 25 18:12 netdev_group -r--r--r-- 1 root root 4096 Jan 25 18:12 operstate -r--r--r-- 1 root root 4096 Jan 25 18:12 phys_port_id -r--r--r-- 1 root root 4096 Jan 25 18:12 phys_port_name -r--r--r-- 1 root root 4096 Jan 25 18:12 phys_switch_id drwxr-xr-x 2 root root 0 Jan 25 18:12 power -rw-r--r-- 1 root root 4096 Jan 25 18:12 proto_down drwxr-xr-x 4 root root 0 Jan 25 18:12 queues -r--r--r-- 1 root root 4096 Jan 25 18:12 speed drwxr-xr-x 2 root root 0 Jan 25 18:12 statistics lrwxrwxrwx 1 nobody nobody 0 Jan 25 18:12 subsystem -> ../../../../class/net -rw-r--r-- 1 root root 4096 Jan 25 18:12 tx_queue_len -r--r--r-- 1 root root 4096 Jan 25 18:12 type -rw-r--r-- 1 root root 4096 Jan 25 18:12 uevent Now, when creating a network device in a network namespace owned by a user namespace and moving it to the host the permissions will be set to the id that the user namespace root user has been mapped to on the host leading to all sorts of permission issues: 458752 drwxr-xr-x 5 458752 458752 0 Jan 25 18:12 . drwxr-xr-x 9 root root 0 Jan 25 18:08 .. -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 addr_assign_type -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 addr_len -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 address -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 broadcast -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 carrier -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 carrier_changes -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 carrier_down_count -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 carrier_up_count -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 dev_id -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 dev_port -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 dormant -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 duplex -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 flags -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 gro_flush_timeout -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 ifalias -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 ifindex -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 iflink -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 link_mode -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 mtu -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 name_assign_type -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 netdev_group -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 operstate -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 phys_port_id -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 phys_port_name -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 phys_switch_id drwxr-xr-x 2 458752 458752 0 Jan 25 18:12 power -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 proto_down drwxr-xr-x 4 458752 458752 0 Jan 25 18:12 queues -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 speed drwxr-xr-x 2 458752 458752 0 Jan 25 18:12 statistics lrwxrwxrwx 1 root root 0 Jan 25 18:12 subsystem -> ../../../../class/net -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 tx_queue_len -r--r--r-- 1 458752 458752 4096 Jan 25 18:12 type -rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 uevent Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26drivers/base/power: add dpm_sysfs_change_owner()Christian Brauner
Add a helper to change the owner of a device's power entries. This needs to happen when the ownership of a device is changed, e.g. when moving network devices between network namespaces. This function will be used to correctly account for ownership changes, e.g. when moving network devices between network namespaces. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26device: add device_change_owner()Christian Brauner
Add a helper to change the owner of a device's sysfs entries. This needs to happen when the ownership of a device is changed, e.g. when moving network devices between network namespaces. This function will be used to correctly account for ownership changes, e.g. when moving network devices between network namespaces. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26sysfs: add sysfs_change_owner()Christian Brauner
Add a helper to change the owner of sysfs objects. This function will be used to correctly account for kobject ownership changes, e.g. when moving network devices between network namespaces. This mirrors how a kobject is added through driver core which in its guts is done via kobject_add_internal() which in summary creates the main directory via create_dir(), populates that directory with the groups associated with the ktype of the kobject (if any) and populates the directory with the basic attributes associated with the ktype of the kobject (if any). These are the basic steps that are associated with adding a kobject in sysfs. Any additional properties are added by the specific subsystem itself (not by driver core) after it has registered the device. So for the example of network devices, a network device will e.g. register a queue subdirectory under the basic sysfs directory for the network device and than further subdirectories within that queues subdirectory. But that is all specific to network devices and they call the corresponding sysfs functions to do that directly when they create those queue objects. So anything that a subsystem adds outside of what driver core does must also be changed by it (That's already true for removal of files it created outside of driver core.) and it's the same for ownership changes. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26sysfs: add sysfs_group{s}_change_owner()Christian Brauner
Add helpers to change the owner of sysfs groups. This function will be used to correctly account for kobject ownership changes, e.g. when moving network devices between network namespaces. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26sysfs: add sysfs_link_change_owner()Christian Brauner
Add a helper to change the owner of a sysfs link. This function will be used to correctly account for kobject ownership changes, e.g. when moving network devices between network namespaces. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26sysfs: add sysfs_file_change_owner()Christian Brauner
Add helpers to change the owner of a sysfs files. This function will be used to correctly account for kobject ownership changes, e.g. when moving network devices between network namespaces. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not neededNicolas Saenz Julienne
Outdated Raspberry Pi 4 firmware might configure the external PHY as rgmii although the kernel currently sets it as rgmii-rxid. This makes connections unreliable as ID_MODE_DIS is left enabled. To avoid this, explicitly clear that bit whenever we don't need it. Fixes: da38802211cc ("net: bcmgenet: Add RGMII_RXID support") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26sched: act: count in the size of action flags bitfieldJiri Pirko
The put of the flags was added by the commit referenced in fixes tag, however the size of the message was not extended accordingly. Fix this by adding size of the flags bitfield to the message size. Fixes: e38226786022 ("net: sched: update action implementations to support flags") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27kbuild: get rid of trailing slash from subdir- exampleMasahiro Yamada
obj-* needs a trailing slash for a directory, but subdir-* does not. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-26net: core: devlink.c: Use built-in RCU list checkingMadhuparna Bhowmik
list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled. The devlink->lock is held when devlink_dpipe_table_find() is called in non RCU read side section. Therefore, pass struct devlink to devlink_dpipe_table_find() for lockdep checking. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: cisco: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] Lastly, fix the following checkpatch warning: CHECK: Prefer kernel type 'u32' over 'u_int32_t' #61: FILE: drivers/net/ethernet/cisco/enic/vnic_devcmd.h:653: + u_int32_t val[]; This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: marvell: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: hns: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26sfc: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26qlogic: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was detected with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: dsa: bcm_sf2: Forcibly configure IMP port for 1Gb/secFlorian Fainelli
We are still experiencing some packet loss with the existing advanced congestion buffering (ACB) settings with the IMP port configured for 2Gb/sec, so revert to conservative link speeds that do not produce packet loss until this is resolved. Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec") Fixes: de34d7084edd ("net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26Revert "net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278"Florian Fainelli
This reverts commit 7458bd540fa0a90220b9e8c349d910d9dde9caf8 ("net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278") as it causes advanced congestion buffering issues with 7278 switch devices when using their internal Giabit PHY. While this is being debugged, continue with conservative defaults that work and do not cause packet loss. Fixes: 7458bd540fa0 ("net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes: 1) Perform garbage collection from workqueue to fix rcu detected stall in ipset hash set types, from Jozsef Kadlecsik. 2) Fix the forceadd evaluation path, also from Jozsef. 3) Fix nft_set_pipapo selftest, from Stefano Brivio. 4) Crash when add-flush-add element in pipapo set, also from Stefano. Add test to cover this crash. 5) Remove sysctl entry under mutex in hashlimit, from Cong Wang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26Merge tag 'tag-chrome-platform-fixes-for-v5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform fix from Benson Leung: "Fix a build warning" * tag 'tag-chrome-platform-fixes-for-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: wilco_ec: Include asm/unaligned instead of linux/ path
2020-02-26bnxt_en: add newline to netdev_*() format stringsJonathan Lemon
Add missing newlines to netdev_* format strings so the lines aren't buffered by the printk subsystem. Nitpicked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26netfilter: xt_hashlimit: unregister proc file before releasing mutexCong Wang
Before releasing the global mutex, we only unlink the hashtable from the hash list, its proc file is still not unregistered at this point. So syzbot could trigger a race condition where a parallel htable_create() could register the same file immediately after the mutex is released. Move htable_remove_proc_entry() back to mutex protection to fix this. And, fold htable_destroy() into htable_put() to make the code slightly easier to understand. Reported-and-tested-by: syzbot+d195fd3b9a364ddd6731@syzkaller.appspotmail.com Fixes: c4a3922d2d20 ("netfilter: xt_hashlimit: reduce hashlimit_mutex scope for htable_put()") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-26ethtool: limit bitset sizeMichal Kubecek
Syzbot reported that ethnl_compact_sanity_checks() can be tricked into reading past the end of ETHTOOL_A_BITSET_VALUE and ETHTOOL_A_BITSET_MASK attributes and even the message by passing a value between (u32)(-31) and (u32)(-1) as ETHTOOL_A_BITSET_SIZE. The problem is that DIV_ROUND_UP(attr_nbits, 32) is 0 for such values so that zero length ETHTOOL_A_BITSET_VALUE will pass the length check but ethnl_bitmap32_not_zero() check would try to access up to 512 MB of attribute "payload". Prevent this overflow byt limiting the bitset size. Technically, compact bitset format would allow bitset sizes up to almost 2^18 (so that the nest size does not exceed U16_MAX) but bitsets used by ethtool are much shorter. S16_MAX, the largest value which can be directly used as an upper limit in policy, should be a reasonable compromise. Fixes: 10b518d4e6dd ("ethtool: netlink bitset handling") Reported-by: syzbot+7fd4ed5b4234ab1fdccd@syzkaller.appspotmail.com Reported-by: syzbot+709b7a64d57978247e44@syzkaller.appspotmail.com Reported-by: syzbot+983cb8fb2d17a7af549d@syzkaller.appspotmail.com Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: Fix Tx hash bound checkingAmritha Nambiar
Fixes the lower and upper bounds when there are multiple TCs and traffic is on the the same TC on the same device. The lower bound is represented by 'qoffset' and the upper limit for hash value is 'qcount + qoffset'. This gives a clean Rx to Tx queue mapping when there are multiple TCs, as the queue indices for upper TCs will be offset by 'qoffset'. v2: Fixed commit description based on comments. Fixes: 1b837d489e06 ("net: Revoke export for __skb_tx_hash, update it to just be static skb_tx_hash") Fixes: eadec877ce9c ("net: Add support for subordinate traffic classes to netdev_pick_tx") Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26Merge tag 'trace-v5.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing and bootconfig updates: "Fixes and changes to bootconfig before it goes live in a release. Change in API of bootconfig (before it comes live in a release): - Have a magic value "BOOTCONFIG" in initrd to know a bootconfig exists - Set CONFIG_BOOT_CONFIG to 'n' by default - Show error if "bootconfig" on cmdline but not compiled in - Prevent redefining the same value - Have a way to append values - Added a SELECT BLK_DEV_INITRD to fix a build failure Synthetic event fixes: - Switch to raw_smp_processor_id() for recording CPU value in preempt section. (No care for what the value actually is) - Fix samples always recording u64 values - Fix endianess - Check number of values matches number of fields - Fix a printing bug Fix of trace_printk() breaking postponed start up tests Make a function static that is only used in a single file" * tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue bootconfig: Add append value operator support bootconfig: Prohibit re-defining value on same key bootconfig: Print array as multiple commands for legacy command line bootconfig: Reject subkey and value on same parent key tools/bootconfig: Remove unneeded error message silencer bootconfig: Add bootconfig magic word for indicating bootconfig explicitly bootconfig: Set CONFIG_BOOT_CONFIG=n by default tracing: Clear trace_state when starting trace bootconfig: Mark boot_config_checksum() static tracing: Disable trace_printk() on post poned tests tracing: Have synthetic event test use raw_smp_processor_id() tracing: Fix number printing bug in print_synth_event() tracing: Check that number of vals matches number of synth event fields tracing: Make synth_event trace functions endian-correct tracing: Make sure synth_event_trace() example always uses u64
2020-02-26Merge tag 'linux-kselftest-kunit-5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit fixes from Shuah Khan: "This Kselftest kunit update consists of fixes to documentation and the run-time tool from Brendan Higgins and Heidi Fahim" * tag 'linux-kselftest-kunit-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: run kunit_tool from any directory kunit: test: Improve error messages for kunit_tool when kunitconfig is invalid Documentation: kunit: fixed sphinx error in code block
2020-02-26Merge tag 'linux-kselftest-5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: - fixes to TIMEOUT failures and out-of-tree compilation compilation errors from Michael Ellerman. - declutter git status fix from Christophe Leroy * tag 'linux-kselftest-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/rseq: Fix out-of-tree compilation selftests: Install settings files to fix TIMEOUT failures selftest/lkdtm: Don't pollute 'git status'
2020-02-26Revert "KVM: x86: enable -Werror"Christoph Hellwig
This reverts commit ead68df94d248c80fdbae220ae5425eb5af2e753. Using the -Werror flag breaks the build for me due to mostly harmless KASAN or similar warnings: arch/x86/kvm/x86.c: In function ‘kvm_timer_init’: arch/x86/kvm/x86.c:7209:1: error: the frame size of 1112 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Feel free to add a CONFIG_WERROR if you care strong enough, but don't break peoples builds for absolutely no good reason. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-26signal: avoid double atomic counter increments for user accountingLinus Torvalds
When queueing a signal, we increment both the users count of pending signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount of the user struct itself (because we keep a reference to the user in the signal structure in order to correctly account for it when freeing). That turns out to be fairly expensive, because both of them are atomic updates, and particularly under extreme signal handling pressure on big machines, you can get a lot of cache contention on the user struct. That can then cause horrid cacheline ping-pong when you do these multiple accesses. So change the reference counting to only pin the user for the _first_ pending signal, and to unpin it when the last pending signal is dequeued. That means that when a user sees a lot of concurrent signal queuing - which is the only situation when this matters - the only atomic access needed is generally the 'sigpending' count update. This was noticed because of a particularly odd timing artifact on a dual-socket 96C/192T Cascade Lake platform: when you get into bad contention, on that machine for some reason seems to be much worse when the contention happens in the upper 32-byte half of the cacheline. As a result, the kernel test robot will-it-scale 'signal1' benchmark had an odd performance regression simply due to random alignment of the 'struct user_struct' (and pointed to a completely unrelated and apparently nonsensical commit for the regression). Avoiding the double increments (and decrements on the dequeueing side, of course) makes for much less contention and hugely improved performance on that will-it-scale microbenchmark. Quoting Feng Tang: "It makes a big difference, that the performance score is tripled! bump from original 17000 to 54000. Also the gap between 5.0-rc6 and 5.0-rc6+Jiri's patch is reduced to around 2%" [ The "2% gap" is the odd cacheline placement difference on that platform: under the extreme contention case, the effect of which half of the cacheline was hot was 5%, so with the reduced contention the odd timing artifact is reduced too ] It does help in the non-contended case too, but is not nearly as noticeable. Reported-and-tested-by: Feng Tang <feng.tang@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Philip Li <philip.li@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 21:39:34 +0000