| Age | Commit message (Collapse) | Author |
|---|
|
s/techically/technically/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
debugfs_create_file_unsafe does not protect the fops handed to it
against file removal. DEFINE_DEBUGFS_ATTRIBUTE makes the fops aware of
the file lifetime and thus protects it against removal.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
+. LOONGSON64 use 0x98xx_xxxx_xxxx_xxxx as xphys cached, instread of
0xa8xx_xxxx_xxxx_xxxx
+. let CONFIG_MIPS_PGD_C0_CONTEXT depend on 64bit
+. cast CAC_BASE into u64 to silence warning on MIPS32
CP0 Context has enough room for wraping pgd into its 41-bit PTEBase field.
+. For XPHYS, the trick is that pgd is 4kB aligned, and the PABITS <= 53,
only save 53 - 12 = 41 bits, aka :
bit[63:59] | 0000 00 | bit[53:12] | 0000 0000 0000
+. for CKSEG0, only save 29 - 12 = 17 bits
when switching pgd, only need to save bit[53:12] or bit[28:12] into
CP0 Context's bit[63:23], see folling asm generated at run time
tlbmiss_handler_setup_pgd:
.set push
.set noreorder
dsra a2, a0, 29
move a3, a0
dins a0, zero, 29, 35
daddiu a2, a2, 4 //for CKSEG0, a2 from 0xfffffffffffffffc
//into 0
movn a0, a3, a2
dsll a0, a0, 11
jr ra
dmtc0 a0, CP0_CONTEXT
.set pop
when using it on page walking
dmfc0 k0, CP0_CONTEXT
dins k0, zero, 0, 23 // zero badv2
ori k0, k0, (CAC_BASE >> 53) // *prefix* with bit[63:59]
drotr k0, k0, 11 // kick it in the right place
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The NT39016 panel is a fun beast, even though the documentation states
that the CS line is active-low, it will work just fine if the CS line is
configured as active-high, but it won't work if the CS line is forced
low or forced high.
Since it did actually work with the spi-cs-high property, this is not a
bugfix, but we should nonetheless remove that property to match the
documentation.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The NT39016 panel is a fun beast, even though the documentation states
that the CS line is active-low, it will work just fine if the CS line is
configured as active-high, but it won't work if the CS line is forced
low or forced high.
Since it did actually work with the spi-cs-high property, this is not a
bugfix, but we should nonetheless remove that property from the example
to match the documentation.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Separated function was not improving code quality much (or at all).
Moreover it expected possible flash end address as argument and it was
returning NVRAM size.
The new code always operates on offsets which means less logic and less
calculations.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This loop requires variable initialization, stop condition and post
iteration increment. It's pretty much a for loop definition.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This simplifies function finding NVRAM. It doesn't directly deal with
NVRAM structure anymore and is a bit smaller.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This avoids duplicating code doing casting and checking for NVRAM magic.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
1. Use "bcm47xx_" function name prefix for consistency
2. It takes flash start as argument so s/iobase/flash_start/
3. "off" was used for finding flash end so just call it "flash_size"
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Loongson64 allocates arrays of pglist_data statically and is located
at Node 0, and cpu from Nodes other than 0 need remote access to
pglist_data and zone info.
Delay pglist_data allocation till run time, and make it NUMA-aware
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The purpose of separating loongson_system_configuration from boot_param.h
is to keep the other structure consistent with the firmware.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
We don't need them anymore, They are uniform on all Loongson64 systems
and have been fixed in DeviceTree.loongson3_platform_init is replaced
with DTS + driver.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Upstream a long-standing OpenWrt patch [0] that fixes MT7620 PCIe PLL
lock check. The existing code checks the wrong register bit: PPLL_SW_SET
is not defined in PPLL_CFG1 and bit 31 of PPLL_CFG1 is marked as reserved
in the MT7620 Programming Guide. The correct bit to check for PLL lock
is PPLL_LD (bit 23).
Also reword the error message for clarity.
Without this change it is unlikely that this driver ever worked with
mainline kernel.
[0]: https://lists.infradead.org/pipermail/lede-commits/2017-July/004441.html
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that there are proper device tree bindings we can start using them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that there are proper device tree bindings we can start using them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that there are proper device tree bindings we can start using them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that there are proper device tree bindings we can start using them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that there are proper device tree bindings we can start using them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that there are proper device tree bindings we can start using them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Change /include/ with #include in order to be able to include header files
from dt-bindings.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
bpftrace is a high-level tracing language for Linux enhanced Berkeley
Packet Filter (eBPF) available in recent Linux kernels (4.x). bpftrace
uses LLVM as a backend to compile scripts to BPF-bytecode and makes use
of BCC for interacting with the Linux BPF system, as well as existing
Linux tracing capabilities: kernel dynamic tracing (kprobes), user-level
dynamic tracing (uprobes), and tracepoints.
According to Linux Kernel Requirements in bpftrace/INSTALL.md [1], the
kernel needs to be built with the following options:
CONFIG_BPF=y
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_BPF_EVENTS=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_HAVE_KPROBES=y
CONFIG_KPROBES=y
CONFIG_KPROBE_EVENTS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_UPROBES=y
CONFIG_UPROBE_EVENTS=y
CONFIG_DEBUG_FS=y
So enable some missed configs in loongson3_defconfig to make sure
the above configs are set after make loongson3_defconfig.
[1] https://github.com/iovisor/bpftrace/blob/master/INSTALL.md
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
s/revelant/relevant/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Many architectures duplicate similar shell scripts.
This commit converts mips to use scripts/syscallhdr.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Many architectures duplicate similar shell scripts.
This commit converts mips to use scripts/syscalltbl.sh. This also
unifies syscall_table_32_o32.h and syscall_table_64_o32.h into
syscall_table_o32.h.
The offset parameters are unneeded here; __SYSCALL(nr, entry) is defined
as 'PTR entry', so the parameter 'nr' is not used in the first place.
With this commit, syscall tables and generated files are straight
mapped, which makes things easier to understand.
syscall_n32.tbl --> syscall_table_n32.h
syscall_n64.tbl --> syscall_table_n64.h
syscall_o32.tbl --> syscall_table_o32.h
Then, the abi parameters are also unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
After removal of the guest part of KVM TE (trap and emulate), also remove
the host part.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
KVM_GUEST is broken and unmaintained, so let's remove it.
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
- fixes for boot breakage because of misaligned FDTs
- fix for overwritten exception handlers
- enable MIPS optimized crypto for all MIPS CPUs to improve wireguard
performance
|
|
BMIPS is one of the few platforms that do change the exception base.
After commit 2dcb39645441 ("memblock: do not start bottom-up allocations
with kernel_end") we started seeing BMIPS boards fail to boot with the
built-in FDT being corrupted.
Before the cited commit, early allocations would be in the [kernel_end,
RAM_END] range, but after commit they would be within [RAM_START +
PAGE_SIZE, RAM_END].
The custom exception base handler that is installed by
bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the
memory region allocated by unflatten_and_copy_device_tree() thus
corrupting the FDT used by the kernel.
To fix this, we need to perform an early reservation of the custom
exception space. Additional we reserve the first 4k (1k for R3k) for
either normal exception vector space (legacy CPUs) or special vectors
like cache exceptions.
Huge thanks to Serge for analysing and proposing a solution to this
issue.
Fixes: 2dcb39645441 ("memblock: do not start bottom-up allocations with kernel_end")
Reported-by: Kamal Dasu <kdasu.kdev@gmail.com>
Debugged-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The devicetree specification requires 8-byte alignment in
memory. This is now enforced by libfdt since commit 79edff12060f
("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
which included the upstream commit 5e735860c478 ("libfdt: Check for
8-byte address alignment in fdt_ro_probe_()").
This broke the MIPS raw appended DTBs which would be appended to
the image immediately following the initramfs section. This ends
with a 32bit size, resulting in a 4-byte alignment of the DTB.
Fix by padding with zeroes to 8-bytes when MIPS_RAW_APPENDED_DTB
is defined.
Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The MIPS Poly1305 implementation is generic MIPS code written such as to
support down to the original MIPS I and MIPS III ISA for the 32-bit and
64-bit variant respectively. Lift the current limitation then to enable
code for MIPSr1 ISA or newer processors only and have it available for
all MIPS processors.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: a11d055e7a64 ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation")
Cc: stable@vger.kernel.org # v5.5+
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Since 5.12-rc1, the Device Tree blob must now be properly aligned.
Therefore, the decompress routine must be careful to copy the blob at
the next aligned address after the kernel image.
This commit fixes the kernel sometimes not booting with a Device Tree
blob appended to it.
Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
These are PCI based systems, so not enabling the support is rather
pointless. Additionally the random configѕ generated by the build bot
for IP27 and IP30 builds without PCI fail to buіld.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Ensure this file has a prototype for phys_to_dma and dma_to_phys.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Ensure this file has a prototype for phys_to_dma and dma_to_phys.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fix the following coccicheck warning:
./arch/mips/cavium-octeon/oct_ilm.c:65:0-23: WARNING:
reset_statistics_ops should be defined with DEFINE_DEBUGFS_ATTRIBUTE
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
MIPS doesn't have architecture-optimized bitsearching functions,
like find_{first,next}_bit() etc.
It's absolutely harmless to enable GENERIC_FIND_FIRST_BIT as this
functionality is not new at all and well-tested. It provides more
optimized code and saves some .text memory (32 R2):
add/remove: 4/1 grow/shrink: 1/53 up/down: 216/-372 (-156)
Users of for_each_set_bit() like hotpath gic_handle_shared_int()
will also benefit from this.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
CPU_MIPS64 is supposed to be selected for CPUs that implement a revision
of the MIPS64 ISA. While it contains the generic ones, it forgot about
Octeon and Loongson in its list, which are indeed MIPS64 processors.
This commit adds these missing CPUs to the auto-selection list.
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: George Cherian <gcherian@marvell.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This board is used in Ubiquiti EdgeRouter 4.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
When booting bmips with SMP enabled on a BCM6358 running on CPU #1 instead of
CPU #0, the current CPU mapping code produces the following:
- smp_processor_id(): 0
- cpu_logical_map(0): 1
- cpu_number_map(0): 1
This is because SMP isn't supported on BCM6358 since it has a shared TLB, so
it is disabled and max_cpus is decreased from 2 to 1.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This is a Copyright line, and just a typo slipped through.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
|
|
Pull rdma fixes from Jason Gunthorpe:
"Nothing special here, though Bob's regression fixes for rxe would have
made it before the rc cycle had there not been such strong winter
weather!
- Fix corner cases in the rxe reference counting cleanup that are
causing regressions in blktests for SRP
- Two kdoc fixes so W=1 is clean
- Missing error return in error unwind for mlx5
- Wrong lock type nesting in IB CM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
RDMA/rxe: Fix missed IB reference counting in loopback
RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
RDMA/mlx5: Set correct kernel-doc identifier
IB/mlx5: Add missing error code
RDMA/rxe: Fix missing kconfig dependency on CRYPTO
RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull gcc-plugins fixes from Kees Cook:
"Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
been reported a couple times now by static analyzers, so best to get
them fixed to reduce the noise. :)
- Fix coding style issues (Jason Yan)"
* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: latent_entropy: remove unneeded semicolon
gcc-plugins: structleak: remove unneeded variable 'ret'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore fixes from Kees Cook:
- Rate-limit ECC warnings (Dmitry Osipenko)
- Fix error path check for NULL (Tetsuo Handa)
* tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/ram: Rate-limit "uncorrectable error in header" message
pstore: Fix warning in pstore_kill_sb()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Fix DM verity target's optional Forward Error Correction (FEC) for
Reed-Solomon roots that are unaligned to block size"
* tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: fix FEC for RS roots unaligned to block size
dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
|
|
Pull block fixes from Jens Axboe:
- NVMe fixes:
- more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal
Terjan)
- fix a hwmon error return (Daniel Wagner)
- fix the keep alive timeout initialization (Martin George)
- ensure the model_number can't be changed on a used subsystem
(Max Gurtovoy)
- rsxx missing -EFAULT on copy_to_user() failure (Dan)
- rsxx remove unused linux.h include (Tian)
- kill unused RQF_SORTED (Jean)
- updated outdated BFQ comments (Joseph)
- revert work-around commit for bd_size_lock, since we removed the
offending user in this merge window (Damien)
* tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block:
nvmet: model_number must be immutable once set
nvme-fabrics: fix kato initialization
nvme-hwmon: Return error code when registration fails
nvme-pci: add quirks for Lexar 256GB SSD
nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.
rsxx: Return -EFAULT if copy_to_user() fails
block/bfq: update comments and default value in docs for fifo_expire
rsxx: remove unused including <linux/version.h>
block: Drop leftover references to RQF_SORTED
block: revert "block: fix bd_size_lock use"
|
|
Pull io_uring fixes from Jens Axboe:
"A bit of a mix between fallout from the worker change, cleanups and
reductions now possible from that change, and fixes in general. In
detail:
- Fully serialize manager and worker creation, fixing races due to
that.
- Clean up some naming that had gone stale.
- SQPOLL fixes.
- Fix race condition around task_work rework that went into this
merge window.
- Implement unshare. Used for when the original task does unshare(2)
or setuid/seteuid and friends, drops the original workers and forks
new ones.
- Drop the only remaining piece of state shuffling we had left, which
was cred. Move it into issue instead, and we can drop all of that
code too.
- Kill f_op->flush() usage. That was such a nasty hack that we had
out of necessity, we no longer need it.
- Following from ->flush() removal, we can also drop various bits of
ctx state related to SQPOLL and cancelations.
- Fix an issue with IOPOLL retry, which originally was fallout from a
filemap change (removing iov_iter_revert()), but uncovered an issue
with iovec re-import too late.
- Fix an issue with system suspend.
- Use xchg() for fallback work, instead of cmpxchg().
- Properly destroy io-wq on exec.
- Add create_io_thread() core helper, and use that in io-wq and
io_uring. This allows us to remove various silly completion events
related to thread setup.
- A few error handling fixes.
This should be the grunt of fixes necessary for the new workers, next
week should be quieter. We've got a pending series from Pavel on
cancelations, and how tasks and rings are indexed. Outside of that,
should just be minor fixes. Even with these fixes, we're still killing
a net ~80 lines"
* tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits)
io_uring: don't restrict issue_flags for io_openat
io_uring: make SQPOLL thread parking saner
io-wq: kill hashed waitqueue before manager exits
io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return
io_uring: don't keep looping for more events if we can't flush overflow
io_uring: move to using create_io_thread()
kernel: provide create_io_thread() helper
io_uring: reliably cancel linked timeouts
io_uring: cancel-match based on flags
io-wq: ensure all pending work is canceled on exit
io_uring: ensure that threads freeze on suspend
io_uring: remove extra in_idle wake up
io_uring: inline __io_queue_async_work()
io_uring: inline io_req_clean_work()
io_uring: choose right tctx->io_wq for try cancel
io_uring: fix -EAGAIN retry with IOPOLL
io-wq: fix error path leak of buffered write hash map
io_uring: remove sqo_task
io_uring: kill sqo_dead and sqo submission halting
io_uring: ignore double poll add on the same waitqueue head
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the usage of device links in the runtime PM core code and
update the DTPM (Dynamic Thermal Power Management) feature added
recently.
Specifics:
- Make the runtime PM core code avoid attempting to suspend supplier
devices before updating the PM-runtime status of a consumer to
'suspended' (Rafael Wysocki).
- Fix DTPM (Dynamic Thermal Power Management) root node
initialization and label that feature as EXPERIMENTAL in Kconfig
(Daniel Lezcano)"
* tag 'pm-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap/drivers/dtpm: Add the experimental label to the option description
powercap/drivers/dtpm: Fix root node initialization
PM: runtime: Update device status before letting suppliers suspend
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Make the empty stubs of some helper functions used when CONFIG_ACPI is
not set actually match those functions (Andy Shevchenko)"
* tag 'acpi-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: bus: Constify is_acpi_node() and friends (part 2)
|
