summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-09Merge branch 'netvsc-small-cleanups'David S. Miller
Stephen Hemminger says: ==================== netvsc: small cleanups These are all small optimizations found during development of later features. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09netvsc: fold in get_outbound_net_devicestephen hemminger
No longer need common code to find get_outbound_net_device. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09netvsc: pass net_device to netvsc_init_buf and netvsc_connect_vspstephen hemminger
Don't need to find netvsc_device structure, caller already had it. Also rearrange declarations. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09netvsc: mark error cases as unlikelystephen hemminger
Mark if() statements used for error handling only as unlikely() Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09netvsc: use typed pointer for internal statestephen hemminger
The element netvsc_device:extension is always a pointer to RNDIS information. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09netvsc: use hv_get_bytes_to_readstephen hemminger
Don't need need to look at write space in netvsc_close. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09netvsc: optimize calculation of number of slotsstephen hemminger
Speed up transmit check for fragmented packets by using existing macros to compute number of pages, and eliminate loop since skb fragments each take a page. Number of slots is also unsigned. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09Merge branch 'dsa-mv88e6xxx-ops-cosmetics'David S. Miller
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: ops cosmetics This patchset brings no functional changes. It is a first step in a bigger cosmetics change to the driver. It simplifies print messages and polishes data types and chip operations. The next patchs will only prefix and document the port registers macros. Changes in v2: - KISS and simply use dev_* since chip->ds may not be initialized - add reviewers tags ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv88e6xxx: prefix PHY macrosVivien Didelot
Prefix the PHY_* macros with a Marvell specific MV88E6XXX_ prefix. There is no functional changes. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv88e6xxx: rework jumbo size operationVivien Didelot
Marvell chips have a Jumbo Mode to set the maximum frame size (MTU). The mv88e6xxx_ops structure is meant to contain generic functionalities, no driver logic. Change port_jumbo_config to port_set_jumbo_size setting the mode from a given maximum size value. There is no functional changes since we still use 10240 bytes. At the same time, correctly clear all Jumbo Mode bits before writing. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv88e6xxx: rework pause limit operationVivien Didelot
All Marvell chips supporting Pause frames limiting use 1-byte value for input and output. Old chips have both bytes adjacent in a 16-bit register. New ones have an indirect table using 8-bit data. The mv88e6xxx library functions (such as in port.c) must not contain driver logic, but only generic helpers. This patch changes the port_pause_config operation for port_pause_limit taking two u8 arguments for input and output limits. There is no functional changes. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv88e6xxx: do not prefix ops with g1Vivien Didelot
The mv88e6xxx_ops describe functionalities, regardless their locations (which can be Global1, Global2, or whatever register set.) Rename the g1_set_cpu_port and g1_set_egress_port ops to set_cpu_port and set_egress_port. No functional changes. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv88e6xxx: use bridge state valuesVivien Didelot
Reuse the BR_STATE_* values to abstract a port STP state value. This provides shorter names and better control over the DSA switch operation call. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv88e6xxx: add egress mode enumerationVivien Didelot
As for the frame mode, add a mv88e6xxx_egress_mode enumeration instead of a 16-bit register mask. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv888e6xxx: do not use netdev printingVivien Didelot
The mv888e6xxx driver accesses a port's netdev mostly for printing. This is bad for 2 reasons: DSA and CPU ports do not have a netdev pointer; it doesn't give us a correct picture of why a DSA driver might need to access a port's netdev. Instead simply use dev_* printing functions with chip->dev (or ds->dev depending on the scope, both guaranteed to exist), with a p%d prefix for the target port. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08skbuff: only inherit relevant tx_flagsWillem de Bruijn
When inheriting tx_flags from one skbuff to another, always apply a mask to avoid overwriting unrelated other bits in the field. The two SKBTX_SHARED_FRAG cases clears all other bits. In practice, tx_flags are zero at this point now. But this is fragile. Timestamp flags are set, for instance, if in tcp_gso_segment, after this clear in skb_segment. The SKBTX_ANY_TSTAMP mask in __skb_tstamp_tx ensures that new skbs do not accidentally inherit flags such as SKBTX_SHARED_FRAG. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08Merge branch 'net-add-const-to-mii_phy_ops-structures'David S. Miller
Bhumika Goyal says: ==================== drivers: net: add const to mii_phy_ops structures The object references of mii_phy_ops structures are only stored in the ops field of a mii_phy_def structure. This ops field is of type const. So, mii_phy_ops structures having similar properties can be declared as const. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08drivers: net: emac: add const to mii_phy_ops structuresBhumika Goyal
The object references of mii_phy_ops structures are only stored in the ops field of a mii_phy_def structure. This ops field is of type const. So, mii_phy_ops structures having similar properties can be declared as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08drivers/net/sungem: add const to mii_phy_ops structuresBhumika Goyal
The object references of mii_phy_ops structures are only stored in the ops field of a mii_phy_def structure. This ops field is of type const. So, mii_phy_ops structures having similar properties can be declared as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2017-06-07 This series contains a fix for e1000e and igb. Colin Ian King fixes sparse warnings in igb by making functions static. Chris Wilson provides a fix for a previous commit which is causing an issue during suspend "e1000e_pm_suspend()", where we need to run e1000e_pm_thaw() if __e1000_shutdown() is unsuccessful. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08cxgb4: fix to bring link down after adapter crashRahul Lakkireddy
Use PORT_REG for T4 and T5_PORT_REG for > T4 to write to correct register to bring down link during shutdown after adapter crash. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: ipmr: add getlink supportNikolay Aleksandrov
Currently there's no way to dump the VIF table for an ipmr table other than the default (via proc). This is a major issue when debugging ipmr issues and in general it is good to know which interfaces are configured. This patch adds support for RTM_GETLINK for the ipmr family so we can dump the VIF table and the ipmr table's current config for each table. We're protected by rtnl so no need to acquire RCU or mrt_lock. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08Merge branch 'mlxsw-Remove-compatibility-with-old-firmware'David S. Miller
Jiri Pirko says: ==================== mlxsw: Remove compatibility with old firmware Up until recently we couldn't enforce a minimal firmware version, which forced us to be compatible with old firmware versions. This patchset removes this code and simplifies the driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08mlxsw: spectrum: Pass port argument to module mapping functionsIdo Schimmel
Previous patch made it unnecessary to map ports to modules before we allocate their struct. We can now therefore pass the port struct to these functions, thereby making them consistent with other functions that operate on ports. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08mlxsw: spectrum: Simplify port split flowIdo Schimmel
In commit be94535f9531 ("mlxsw: spectrum: Make split flow match firmware requirements") we had to modify the port split flow to overcome quirks in the device's firmware. This resulted in asymmetrical code with regards to port creation and removal. The problem in the firmware is long gone and since we can now enforce a minimal firmware version, we can simplify the code and make it symmetric again. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08mlxsw: spectrum_router: Mark only first LPM tree as reservedIdo Schimmel
In new firmware versions (that we can now enforce via request_firmware()), only the first LPM tree is reserved and not the first two as in older versions. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08Merge branch 'net-Remove-support-from-bridge-bypass-for-mlxsw-rocker-drivers'David S. Miller
Jiri Pirko says: =================== net: Remove support from bridge bypass for mlxsw/rocker drivers Currently setting bridge port attributes and adding FDBs are done via setting the SELF flag which implies unconsistent offloading model. This patch-set fixes this behavior by making the bridge and drivers which are using it to be totally in sync. This implies several changes: - Offloading bridge flags from the bridge code. - Sending notification about FDB add/del to the software bridge in a similiar way it is done for the hardware externally learned FDBs. By making the offloading model more consistent a cleanup is done in the drivers supporting it. This is done in order to remove un-needed logic related to dump operation which is redundant. First add missing functionality to bridge, then clean up the mlxsw/rocker drivers. v1->v2 - Move bridge-switchdev related stuff to br_switchdev.c as suggested by Nik =================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08rocker: Remove support bridge bypass FDBArkadi Sharshevsky
The FDB add/delete are now done through the notification chain. The FDBs are synced with the bridge and there is no need for extra dumping. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08rocker: Remove support for bypass bridge port attributes/vlan setArkadi Sharshevsky
The bridge port attributes/vlan for mlxsw devices should be set only from bridge code. The vlans are synced totally with the bridge so there is no need to special dump support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08rocker: Add support for learning FDB through notificationArkadi Sharshevsky
Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08rocker: Change world_ops API and implementation to be switchdev independantArkadi Sharshevsky
Currently the switchdev_trans struct is embedded in the world_ops API. In order to add support for adding FDB via a notfication chain the API should be switchdev independent. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08rocker: Add support for querying supported bridge flagsArkadi Sharshevsky
Add support for querying supported bridge flags. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08rocker: Remove support for bridge FDB learning syncArkadi Sharshevsky
Currently the rocker driver supports an option for disabling syncing the hardware learned FDBs with the software bridge. This behavior breaks the bridge offload model and thus it is removed. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: Remove support for bridge bypass ndos from stacked devicesArkadi Sharshevsky
Remove support for bridge bypass ndos from stacked devices. At this point no driver which supports stack device behavior offload supports operation with SELF flag. The case for upper device is already taken care of in both of the following cases: 1. FDB add/del - driver should check at the notification cb if the stacked device contains his ports. 2. Port attribute - calls switchdev code directly which checks for case of stack device. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08mlxsw: spectrum: Remove support for bridge bypass FDB add/delArkadi Sharshevsky
The FDB add/del are now done through the notification chain. The FDBs are synced with the bridge and there is no need for extra dumping. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08mlxsw: spectrum_switchdev: Add support for learning FDB through notificationArkadi Sharshevsky
Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. Support for stacked devices is also provided. In case of a successful FDB add a notification is sent back to bridge. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08mlxsw: spectrum_switchdev: Change switchdev notifier APIArkadi Sharshevsky
The current API for sending switchdev notifications implies only FDB add/del. In order to support notification about successful FDB offload the API is changed. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08mlxsw: spectrum: Remove support for bypass bridge port attributes/vlan setArkadi Sharshevsky
The bridge port attributes/vlan for mlxsw devices should be set only from bridge code. The vlans are synced totally with the bridge so there is no need to special dump support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08mlxsw: spectrum_switchdev: Add support for querying supported bridge flagsArkadi Sharshevsky
Add support for querying supported bridge flags. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08mlxsw: spectrum: Remove support for bridge FDB learning syncArkadi Sharshevsky
Currently the mlxsw driver supports an option for disabling syncing the hardware learned FDBs with the software bridge. This behavior breaks the bridge offload model and thus it is removed. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: bridge: Receive notification about successful FDB offloadArkadi Sharshevsky
When a new static FDB is added to the bridge a notification is sent to the driver for offload. In case of successful offload the driver should notify the bridge back, which in turn should mark the FDB as offloaded. Currently, externally learned is equivalent for being offloaded which is not correct due to the fact that FDBs which are added from user-space are also marked as externally learned. In order to specify if an FDB was successfully offloaded a new flag is introduced. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: bridge: Add support for notifying devices about FDB add/delArkadi Sharshevsky
Currently the bridge doesn't notify the underlying devices about new FDBs learned. The FDB sync is placed on the switchdev notifier chain because devices may potentially learn FDB that are not directly related to their ports, for example: 1. Mixed SW/HW bridge - FDBs that point to the ASICs external devices should be offloaded as CPU traps in order to perform forwarding in slow path. 2. EVPN - Externally learned FDBs for the vtep device. Notification is sent only about static FDB add/del. This is done due to fact that currently this is the only scenario supported by switch drivers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: switchdev: Change notifier chain to be atomicArkadi Sharshevsky
In order to use the switchdev notifier chain for FDB sync with the device it has to be changed to atomic. The is done because the bridge can learn new FDBs in atomic context. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: bridge: Add support for calling FDB external learning under rcuArkadi Sharshevsky
This is done as a preparation to moving the switchdev notifier chain to be atomic. The FDB external learning should be called under rtnl or rcu. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: bridge: Add support for offloading port attributesArkadi Sharshevsky
Currently the flood, learning and learning_sync port attributes are offloaded by setting the SELF flag. Add support for offloading the flood and learning attribute through the bridge code. In case of setting an unsupported flag on a offloded port the operation will fail. The learning_sync attribute doesn't have any software representation and cannot be offloaded through the bridge code. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: switchdev: Add support for querying supported bridge flags by hardwareArkadi Sharshevsky
This is done as a preparation stage before setting the bridge port flags from the bridge code. Currently the device can be queried for the bridge flags state, but the querier cannot distinguish if the flag is disabled or if it is not supported at all. Thus, add new attr and a bit-mask which include information regarding the support on a per-flag basis. Drivers that support bridge offload but not support bridge flags should return zeroed bitmask. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08Merge branch 'dsa-add-cross-chip-VLAN-support'David S. Miller
Vivien Didelot says: ==================== net: dsa: add cross-chip VLAN support The current code in DSA does not support cross-chip VLAN. This means that in a multi-chip environment such as this one (similar to ZII Rev B) [CPU].................... (mdio) (eth0) | : : : _|_____ _______ _______ [__sw0__]--[__sw1__]--[__sw2__] | | | | | | | | | v v v v v v v v v p1 p2 p3 p4 p5 p6 p7 p8 p9 adding a VLAN to p9 won't be enough to reach the CPU, until at least one port of sw0 and sw1 join the VLAN as well and become aware of the VID. This patchset makes the DSA core program the VLAN on the CPU and DSA links itself, which brings seamlessly cross-chip VLAN support to DSA. With this series applied*, the hardware VLAN tables of a 3-switch setup look like this after adding a VLAN to only one port of the end switch: # cat /sys/class/net/br0/bridge/default_pvid 42 # cat /sys/kernel/debug/mv88e6xxx/sw{0,1,2}/vtu # ip link set up master br0 dev lan6 # cat /sys/kernel/debug/mv88e6xxx/sw{0,1,2}/vtu VID FID SID 0 1 2 3 4 5 6 42 1 0 x x x x x = = VID FID SID 0 1 2 3 4 5 6 42 1 0 x x x x x = = VID FID SID 0 1 2 3 4 5 6 7 8 9 42 1 0 u x x x x x x x x = ('x' is excluded, 'u' is untagged, '=' is unmodified DSA and CPU ports.) Completely removing a VLAN entry (which is currently the responsibility of drivers anyway) is not supported yet since it requires some caching. (*) the output is shown from this out-of-tree debugfs patch: https://github.com/vivien/linux/commit/7b61a684b9d6b6a499135a587c7f62a1fddceb8b.patch Changes in v2: - canonical incrementation (port++ instead of ++port) - check CPU and DSA ports before purging a VLAN - add Reviewed-by tags ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: dsa: mv88e6xxx: do not skip ports on VLAN delVivien Didelot
The mv88e6xxx driver currently tries to be smart and remove by itself a VLAN entry from the VTU when the driven switch sees no user ports as members of the VLAN. This is bad in a multi-chip switch fabric, since a chip in between others may have no bridge port members, but still needs to be aware of the VID in order to correctly pass frames in the data path. Now that the DSA core explicitly manages DSA and CPU ports, do not skip them when checking remaining VLAN members. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: dsa: mv88e6xxx: exclude all ports in new VLANVivien Didelot
Now that the DSA core adds the CPU and DSA ports itself to the new VLAN entry, there is no need to include them as members of this VLAN when initializing a new VTU entry. As of now, initialize a new VTU entry with all ports excluded. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: dsa: add CPU and DSA ports as VLAN membersVivien Didelot
In a multi-chip switch fabric, it is currently the responsibility of the driver to add the CPU or DSA (interconnecting chips together) ports as members of a new VLAN entry. This makes the drivers more complicated. We want the DSA drivers to be stupid and the DSA core being the one responsible for caring about the abstracted switch logic and topology. Make the DSA core program the CPU and DSA ports as part of the VLAN. This makes all chips of the data path to be aware of VIDs spanning the the whole fabric and thus, seamlessly add support for cross-chip VLAN. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 01:39:26 +0000