Age | Commit message (Collapse) | Author |
|
Pull io_uring fix from Jens Axboe:
"Just a single fix, annotating the fdinfo side SQ/CQ head/tail reads
with data_race() as they are known racy.
Only serves to silence syzbot testing, by definition these debug
outputs are going to be racy as they may change as soon as we've read
them"
* tag 'io_uring-6.15-20250502' of git://git.kernel.dk/linux:
io_uring/fdinfo: annotate racy sq/cq head/tail reads
|
|
Pull bcachefs fixes from Kent Overstreet:
"Lots of assorted small fixes...
- Some repair path fixes, a fix for -ENOMEM when reconstructing lots
of alloc info on large filesystems, upgrade for ancient 0.14
filesystems, etc.
- Various assert tweaks; assert -> ERO, ERO -> log the error in the
superblock and continue
- casefolding now uses d_ops like on other casefolding filesystems
- fix device label create on device add, fix bucket array resize on
filesystem resize
- fix xattrs with FORTIFY_SOURCE builds with gcc-15/clang"
* tag 'bcachefs-2025-05-01' of git://evilpiepirate.org/bcachefs: (22 commits)
bcachefs: Remove incorrect __counted_by annotation
bcachefs: add missing sched_annotate_sleep()
bcachefs: Fix __bch2_dev_group_set()
bcachefs: Kill ERO for i_blocks check in truncate
bcachefs: check for inode.bi_sectors underflow
bcachefs: Kill ERO in __bch2_i_sectors_acct()
bcachefs: readdir fixes
bcachefs: improve missing journal write device error message
bcachefs: Topology error after insert is now an ERO
bcachefs: Use bch2_kvmalloc() for journal keys array
bcachefs: More informative error message when shutting down due to error
bcachefs: btree_root_unreadable_and_scan_found_nothing autofix for non data btrees
bcachefs: btree_node_data_missing is now autofix
bcachefs: Don't generate alloc updates to invalid buckets
bcachefs: Improve bch2_dev_bucket_missing()
bcachefs: fix bch2_dev_buckets_resize()
bcachefs: Add upgrade table entry from 0.14
bcachefs: Run BCH_RECOVERY_PASS_reconstruct_snapshots on missing subvol -> snapshot
bcachefs: Add missing utf8_unload()
bcachefs: Emit unicode version message on startup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix potential NULL dereference in the i.MX driver
- Fix the pull up/down resistor values in the Meson driver
- Fix the mapping of the PHY LED pins in the Airhoa driver
- Fix EINT interrupts on older controllers and a debounce value issue
in the Mediatek driver
- Fix an erronoeus PINGROUP define in the Qualcomm driver
* tag 'pinctrl-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Fix PINGROUP definition for sm8750
pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init()
pinctrl: mediatek: Fix new design debounce issue
pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers
pinctrl: airoha: fix wrong PHY LED mapping and PHY2 LED defines
pinctrl: meson: define the pull up/down resistor value as 60 kOhm
pinctrl: imx: Return NULL if no group is matched and found
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"ARM-SMMU fixes:
- Fix broken detection of the S2FWB feature
- Ensure page-size bitmap is initialised for SVA domains
- Fix handling of SMMU client devices with duplicate Stream IDs
- Don't fail SMMU probe if Stream IDs are aliased across clients
Intel VT-d fixes:
- Add quirk for IGFX device
- Revert an ATS change to fix a boot failure
AMD IOMMU:
- Fix potential buffer overflow
Core:
- Fix for iommu_copy_struct_from_user()"
* tag 'iommu-fixes-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)
iommu/vt-d: Revert ATS timing change to fix boot failure
iommu: Fix two issues in iommu_copy_struct_from_user()
iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid
iommu/arm-smmu-v3: Fail aliasing StreamIDs more gracefully
iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids
iommu/arm-smmu-v3: Fix pgsize_bit for sva domains
iommu/arm-smmu-v3: Add missing S2FWB feature detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix to avoid bugs due to leftover obj_ext after allocation
profiling is disabled at runtime (Zhenhua Huang)
* tag 'slab-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slab: clean up slab->obj_exts always
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.15-rc5
- imx-lpi2c: fix error handling sequence in probe
|
|
The folio_index() helper is only needed for mixed usage of page cache
and swap cache, for pure page cache usage, the caller can just use
folio->index instead.
It can't be a swap cache folio here. Swap mapping may only call into fs
through 'swap_rw' but btrfs does not use that method for swap.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This reverts commit 7e06de7c83a746e58d4701e013182af133395188.
Commit 7e06de7c83a7 ("btrfs: canonicalize the device path before adding
it") tries to make btrfs to use "/dev/mapper/*" name first, then any
filename inside "/dev/" as the device path.
This is mostly fine when there is only the root namespace involved, but
when multiple namespace are involved, things can easily go wrong for the
d_path() usage.
As d_path() returns a file path that is namespace dependent, the
resulted string may not make any sense in another namespace.
Furthermore, the "/dev/" prefix checks itself is not reliable, one can
still make a valid initramfs without devtmpfs, and fill all needed
device nodes manually.
Overall the userspace has all its might to pass whatever device path for
mount, and we are not going to win the war trying to cover every corner
case.
So just revert that commit, and do no extra d_path() based file path
sanity check.
CC: stable@vger.kernel.org # 6.12+
Link: https://lore.kernel.org/linux-fsdevel/20250115185608.GA2223535@zen.localdomain/
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When trying read-only scrub on a btrfs with rescue=idatacsums mount
option, it will crash with the following call trace:
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
CPU: 1 UID: 0 PID: 835 Comm: btrfs Tainted: G O 6.15.0-rc3-custom+ #236 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csums_bitmap+0x49/0x480 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x35b/0x3d0 [btrfs]
scrub_simple_mirror+0x175/0x290 [btrfs]
scrub_stripe+0x5f7/0x6f0 [btrfs]
scrub_chunk+0x9a/0x150 [btrfs]
scrub_enumerate_chunks+0x333/0x660 [btrfs]
btrfs_scrub_dev+0x23e/0x600 [btrfs]
btrfs_ioctl+0x1dcf/0x2f80 [btrfs]
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[CAUSE]
Mount option "rescue=idatacsums" will completely skip loading the csum
tree, so that any data read will not find any data csum thus we will
ignore data checksum verification.
Normally call sites utilizing csum tree will check the fs state flag
NO_DATA_CSUMS bit, but unfortunately scrub does not check that bit at all.
This results in scrub to call btrfs_search_slot() on a NULL pointer
and triggered above crash.
[FIX]
Check both extent and csum tree root before doing any tree search.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
num_extent_folios() unconditionally calls folio_order() on
eb->folios[0]. If that is NULL this will be a segfault. It is reasonable
for it to return 0 as the number of folios in the eb when the first
entry is NULL, so do that instead.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_prelim_ref() calls the old and new reference variables in the
incorrect order. This causes a NULL pointer dereference because oldref
is passed as NULL to trace_btrfs_prelim_ref_insert().
Note, trace_btrfs_prelim_ref_insert() is being called with newref as
oldref (and oldref as NULL) on purpose in order to print out
the values of newref.
To reproduce:
echo 1 > /sys/kernel/debug/tracing/events/btrfs/btrfs_prelim_ref_insert/enable
Perform some writeback operations.
Backtrace:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 115949067 P4D 115949067 PUD 11594a067 PMD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 1188 Comm: fsstress Not tainted 6.15.0-rc2-tester+ #47 PREEMPT(voluntary) 7ca2cef72d5e9c600f0c7718adb6462de8149622
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
RIP: 0010:trace_event_raw_event_btrfs__prelim_ref+0x72/0x130
Code: e8 43 81 9f ff 48 85 c0 74 78 4d 85 e4 0f 84 8f 00 00 00 49 8b 94 24 c0 06 00 00 48 8b 0a 48 89 48 08 48 8b 52 08 48 89 50 10 <49> 8b 55 18 48 89 50 18 49 8b 55 20 48 89 50 20 41 0f b6 55 28 88
RSP: 0018:ffffce44820077a0 EFLAGS: 00010286
RAX: ffff8c6b403f9014 RBX: ffff8c6b55825730 RCX: 304994edf9cf506b
RDX: d8b11eb7f0fdb699 RSI: ffff8c6b403f9010 RDI: ffff8c6b403f9010
RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000010
R10: 00000000ffffffff R11: 0000000000000000 R12: ffff8c6b4e8fb000
R13: 0000000000000000 R14: ffffce44820077a8 R15: ffff8c6b4abd1540
FS: 00007f4dc6813740(0000) GS:ffff8c6c1d378000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 000000010eb42000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
prelim_ref_insert+0x1c1/0x270
find_parent_nodes+0x12a6/0x1ee0
? __entry_text_end+0x101f06/0x101f09
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
btrfs_is_data_extent_shared+0x167/0x640
? fiemap_process_hole+0xd0/0x2c0
extent_fiemap+0xa5c/0xbc0
? __entry_text_end+0x101f05/0x101f09
btrfs_fiemap+0x7e/0xd0
do_vfs_ioctl+0x425/0x9d0
__x64_sys_ioctl+0x75/0xc0
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In preparation for making the kmalloc() family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct folio **" but the returned type will be
"struct page **". These are the same allocation size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Jakub Kicinski says:
====================
tools: ynl-gen: additional C types and classic netlink handling
This series is a bit of a random grab bag adding things we need
to generate code for rt-link.
First two patches are pretty random code cleanups.
Patch 3 adds default values if the spec is missing them.
Patch 4 adds support for setting Netlink request flags
(NLM_F_CREATE, NLM_F_REPLACE etc.). Classic netlink uses those
quite a bit.
Patches 5 and 6 extend the notification handling for variations
used in classic netlink. Patch 6 adds support for when notification
ID is the same as the ID of the response message to GET.
Next 4 patches add support for handling a couple of complex types.
These are supported by the schema and Python but C code gen wasn't
there.
Patch 11 is a bit of a hack, it skips code related to kernel
policy generation, since we don't need it for classic netlink.
Patch 12 adds support for having different fixed headers per op.
Something we could avoid in previous rtnetlink specs but some
specs do mix.
v2: https://lore.kernel.org/20250425024311.1589323-1-kuba@kernel.org
v1: https://lore.kernel.org/20250424021207.1167791-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250429154704.2613851-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rtnetlink has variety of ops with different fixed headers.
Detect that op fixed header is not the same as family one,
and use sizeof() directly. For reverse parsing we need to
pass the fixed header len along the policy (in the socket
state).
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-13-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rt-link has a vlan-protocols enum with:
name: 8021q value: 33024
name: 8021ad value: 34984
It's nice to have, since it converts the values to strings in Python.
For C, however, the codegen is trying to use enums to generate strict
policy checks. Parsing such sparse enums is not possible via policies.
Since for classic netlink we don't support kernel codegen and policy
generation - skip the auto-generation of checks from enums.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-12-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
IPv6 addresses are expressed as binary arrays since we don't have u128.
Since they are not variable length, however, they are relatively
easy to represent as an array of known size.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-11-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
C codegen supports ArrayNest AKA indexed-array carrying scalars,
but only for the netlink -> struct parsing. Support rendering
from struct to netlink.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-10-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Binary types with struct are fixed size, relatively easy to
handle for multi attr. Declare the member as a pointer.
Count the members, allocate an array, copy in the data.
Allow the netlink attr to be smaller or larger than our view
of the struct in case the build headers are newer or older
than the running kernel.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for multi attr strings (needed for link alt_names).
We record the length individual strings in a len member, to do
the same for multi-attr create a struct ynl_string in ynl.h
and use it as a layer holding both the string and its length.
Since strings may be arbitrary length dynamically allocate each
individual one.
Adjust arg_member and struct member to avoid spacing the double
pointers to get "type **name;" rather than "type * *name;"
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-8-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Allow CRUD-style notification where the notification is more
like the response to the request, which can optionally be
looped back onto the requesting socket. Since the notification
and request are different ops in the spec, for example:
-
name: delrule
doc: Remove an existing FIB rule
attribute-set: fib-rule-attrs
do:
request:
value: 33
attributes: *fib-rule-all
-
name: delrule-ntf
doc: Notify a rule deletion
value: 33
notify: getrule
We need to find the request by ID. Ideally we'd detect this model
from the spec properties, rather than assume that its what all
classic netlink families do. But maybe that'd cause this model
to spread and its easy to get wrong. For now assume CRUD == classic.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-7-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Classic Netlink has GET callbacks with no doit support, just dumps.
Support using their responses in notifications. If notification points
at a type which only has a dump - use the dump's type.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-6-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Classic netlink makes extensive use of flags. Support specifying
them the same way as attributes are specified (using a helper),
for example:
rt_link_newlink_req_set_nlflags(req, NLM_F_CREATE | NLM_F_ECHO);
Wrap the code up in a RenderInfo predicate. I think that some
genetlink families may want this, too. It should be easy to
add a spec property later.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The C codegen refers to op attribute lists all over the place,
without checking if they are present, even tho attribute list
is technically an optional property. Add them automatically
at init if missing so that we don't have to make specs longer.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of walking the entries in the code gen add a method
for the struct class to return if any of the members need
an iterator.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The dict stores struct objects (of class Struct), not just
a trivial set with directions.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Eustall locking fix and disabling on VF
- Documentation fix kernel version supporting hwmon entries
- SVM fixes on error handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/fqkoqvo62fbkvw6xoxoxutzozqksxxudbmqacjm3durid2pkak@imlxghgrk3ob
|
|
The 'has_dma_mapping' flag should be set once there is a
mapping so it could be unmapped in case of error.
v2:
- Resend for CI
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250428024752.881292-1-matthew.brost@intel.com
(cherry picked from commit f64cf7b681af72d3f715c0d0fd72091a54471c1a)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The version in the sysfs attribute should correspond to the version in
which this is enabled and visible for end users. It usually doesn't
correspond to the version in which the patch was developed, but rather a
release that will contain it. Update them to 6.15.
Fixes: dac328dea701 ("drm/xe/hwmon: expose package and vram temperature")
Reported-by: Ulisses Furquim <ulisses.furquim@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4840
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250421-hwmon-doc-fix-v1-1-9f68db702249@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 8500393a8e6c58e5e7c135133ad792fc6fd5b6f4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
On some paths in print_event_fields() it takes the trace_event_sem for
read, even though it should always be held when the function is called.
Remove the taking of that mutex and add a lockdep_assert_held_read() to
make sure the trace_event_sem is held when print_event_fields() is called.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501224128.0b1f0571@batman.local.home
Fixes: 80a76994b2d88 ("tracing: Add "fields" option to show raw trace event fields")
Reported-by: syzbot+441582c1592938fccf09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6813ff5e.050a0220.14dd7d.001b.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Rewrite the textual description for the VIA Rhine platform Ethernet
controller as YAML schema, and switch the filename to follow the
compatible string. These are used in several VIA/WonderMedia SoCs
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250430-rhine-binding-v2-1-4290156c0f57@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
setup
Recent updates to the locking mechanism that protects IPv6 routing tables
[1] have affected the SRv6 networking subsystem. Such changes cause
problems with some SRv6 Endpoints behaviors, like End.B6.Encaps and also
impact SRv6 counters.
Starting from commit 169fd62799e8 ("ipv6: Get rid of RTNL for SIOCADDRT and
RTM_NEWROUTE."), the inet6_rtm_newroute() function no longer needs to
acquire the RTNL lock for creating and configuring IPv6 routes and set up
lwtunnels.
The RTNL lock can be avoided because the ip6_route_add() function
finishes setting up a new route in a section protected by RCU.
This makes sure that no dev/nexthops can disappear during the operation.
Because of this, the steps for setting up lwtunnels - i.e., calling
lwtunnel_build_state() - are now done in a RCU lock section and not
under the RTNL lock anymore.
However, creating and configuring a lwtunnel instance in an
RCU-protected section can be problematic when that tunnel needs to
allocate memory using the GFP_KERNEL flag.
For example, the following trace shows what happens when an SRv6
End.B6.Encaps behavior is instantiated after commit 169fd62799e8 ("ipv6:
Get rid of RTNL for SIOCADDRT and RTM_NEWROUTE."):
[ 3061.219696] BUG: sleeping function called from invalid context at ./include/linux/sched/mm.h:321
[ 3061.226136] in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 445, name: ip
[ 3061.232101] preempt_count: 0, expected: 0
[ 3061.235414] RCU nest depth: 1, expected: 0
[ 3061.238622] 1 lock held by ip/445:
[ 3061.241458] #0: ffffffff83ec64a0 (rcu_read_lock){....}-{1:3}, at: ip6_route_add+0x41/0x1e0
[ 3061.248520] CPU: 1 UID: 0 PID: 445 Comm: ip Not tainted 6.15.0-rc3-micro-vm-dev-00590-ge527e891492d #2058 PREEMPT(full)
[ 3061.248532] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 3061.248549] Call Trace:
[ 3061.248620] <TASK>
[ 3061.248633] dump_stack_lvl+0xa9/0xc0
[ 3061.248846] __might_resched+0x218/0x360
[ 3061.248871] __kmalloc_node_track_caller_noprof+0x332/0x4e0
[ 3061.248889] ? rcu_is_watching+0x3a/0x70
[ 3061.248902] ? parse_nla_srh+0x56/0xa0
[ 3061.248938] kmemdup_noprof+0x1c/0x40
[ 3061.248952] parse_nla_srh+0x56/0xa0
[ 3061.248969] seg6_local_build_state+0x2e0/0x580
[ 3061.248992] ? __lock_acquire+0xaff/0x1cd0
[ 3061.249013] ? do_raw_spin_lock+0x111/0x1d0
[ 3061.249027] ? __pfx_seg6_local_build_state+0x10/0x10
[ 3061.249068] ? lwtunnel_build_state+0xe1/0x3a0
[ 3061.249274] lwtunnel_build_state+0x10d/0x3a0
[ 3061.249303] fib_nh_common_init+0xce/0x1e0
[ 3061.249337] ? __pfx_fib_nh_common_init+0x10/0x10
[ 3061.249352] ? in6_dev_get+0xaf/0x1f0
[ 3061.249369] ? __rcu_read_unlock+0x64/0x2e0
[ 3061.249392] fib6_nh_init+0x290/0xc30
[ 3061.249422] ? __pfx_fib6_nh_init+0x10/0x10
[ 3061.249447] ? __lock_acquire+0xaff/0x1cd0
[ 3061.249459] ? _raw_spin_unlock_irqrestore+0x22/0x70
[ 3061.249624] ? ip6_route_info_create+0x423/0x520
[ 3061.249641] ? rcu_is_watching+0x3a/0x70
[ 3061.249683] ip6_route_info_create_nh+0x190/0x390
[ 3061.249715] ip6_route_add+0x71/0x1e0
[ 3061.249730] ? __pfx_inet6_rtm_newroute+0x10/0x10
[ 3061.249743] inet6_rtm_newroute+0x426/0xc50
[ 3061.249764] ? avc_has_perm_noaudit+0x13d/0x360
[ 3061.249853] ? __pfx_inet6_rtm_newroute+0x10/0x10
[ 3061.249905] ? __lock_acquire+0xaff/0x1cd0
[ 3061.249962] ? rtnetlink_rcv_msg+0x52f/0x890
[ 3061.249996] ? __pfx_inet6_rtm_newroute+0x10/0x10
[ 3061.250012] rtnetlink_rcv_msg+0x551/0x890
[ 3061.250040] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 3061.250065] ? __lock_acquire+0xaff/0x1cd0
[ 3061.250092] netlink_rcv_skb+0xbd/0x1f0
[ 3061.250108] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 3061.250124] ? __pfx_netlink_rcv_skb+0x10/0x10
[ 3061.250179] ? netlink_deliver_tap+0x10b/0x700
[ 3061.250210] netlink_unicast+0x2e7/0x410
[ 3061.250232] ? __pfx_netlink_unicast+0x10/0x10
[ 3061.250241] ? __lock_acquire+0xaff/0x1cd0
[ 3061.250280] netlink_sendmsg+0x366/0x670
[ 3061.250306] ? __pfx_netlink_sendmsg+0x10/0x10
[ 3061.250313] ? find_held_lock+0x2d/0xa0
[ 3061.250344] ? import_ubuf+0xbc/0xf0
[ 3061.250370] ? __pfx_netlink_sendmsg+0x10/0x10
[ 3061.250381] __sock_sendmsg+0x13e/0x150
[ 3061.250420] ____sys_sendmsg+0x33d/0x450
[ 3061.250442] ? __pfx_____sys_sendmsg+0x10/0x10
[ 3061.250453] ? __pfx_copy_msghdr_from_user+0x10/0x10
[ 3061.250489] ? __pfx_slab_free_after_rcu_debug+0x10/0x10
[ 3061.250514] ___sys_sendmsg+0xe5/0x160
[ 3061.250530] ? __pfx____sys_sendmsg+0x10/0x10
[ 3061.250568] ? __lock_acquire+0xaff/0x1cd0
[ 3061.250617] ? find_held_lock+0x2d/0xa0
[ 3061.250678] ? __virt_addr_valid+0x199/0x340
[ 3061.250704] ? preempt_count_sub+0xf/0xc0
[ 3061.250736] __sys_sendmsg+0xca/0x140
[ 3061.250750] ? __pfx___sys_sendmsg+0x10/0x10
[ 3061.250786] ? syscall_exit_to_user_mode+0xa2/0x1e0
[ 3061.250825] do_syscall_64+0x62/0x140
[ 3061.250844] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 3061.250855] RIP: 0033:0x7f0b042ef914
[ 3061.250868] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 e9 5d 0c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53
[ 3061.250876] RSP: 002b:00007ffc2d113ef8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 3061.250885] RAX: ffffffffffffffda RBX: 00000000680f93fa RCX: 00007f0b042ef914
[ 3061.250891] RDX: 0000000000000000 RSI: 00007ffc2d113f60 RDI: 0000000000000003
[ 3061.250897] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000008
[ 3061.250902] R10: fffffffffffff26d R11: 0000000000000246 R12: 0000000000000001
[ 3061.250907] R13: 000055a961f8a520 R14: 000055a961f63eae R15: 00007ffc2d115270
[ 3061.250952] </TASK>
To solve this issue, we replace the GFP_KERNEL flag with the GFP_ATOMIC
one in those SRv6 Endpoints that need to allocate memory during the
setup phase. This change makes sure that memory allocations are handled
in a way that works with RCU critical sections.
[1] - https://lore.kernel.org/all/20250418000443.43734-1-kuniyu@amazon.com/
Fixes: 169fd62799e8 ("ipv6: Get rid of RTNL for SIOCADDRT and RTM_NEWROUTE.")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250429132453.31605-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After 52358dd63e34 ("net: phy: remove function stubs") there's a
problem if CONFIG_MDIO_BUS is set, but CONFIG_PHYLIB is not.
mdiobus_scan() uses phylib functions like get_phy_device().
Bringing back the stub wouldn't make much sense, because it would
allow to compile mdiobus_scan(), but the function would be unusable.
The stub returned NULL, and we have the following in mdiobus_scan():
phydev = get_phy_device(bus, addr, c45);
if (IS_ERR(phydev))
return phydev;
So calling mdiobus_scan() w/o CONFIG_PHYLIB would cause a crash later in
mdiobus_scan(). In general the PHYLIB functionality isn't optional here.
Consequently, MDIO bus providers depend on PHYLIB.
Therefore factor it out and build it together with the libphy core
modules. In addition make all MDIO bus providers under /drivers/net/mdio
depend on PHYLIB. Same applies to enetc MDIO bus provider. Note that
PHYLIB selects MDIO_DEVRES, therefore we can omit this here.
Fixes: 52358dd63e34 ("net: phy: remove function stubs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504270639.mT0lh2o1-lkp@intel.com/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/c74772a9-dab6-44bf-a657-389df89d85c2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MediaTek MT7988 SoC comes with an single built-in Ethernet PHY for
2500Base-T/1000Base-T/100Base-TX/10Base-T link partners in addition to
the built-in 1GE switch. The built-in PHY only supports full duplex.
Add muxes allowing to select GMAC2->2.5G PHY path and add basic support
for XGMAC as the built-in 2.5G PHY is internally connected via XGMII.
The XGMAC features will also be used by 5GBase-R, 10GBase-R and USXGMII
SerDes modes which are going to be added once support for standalone PCS
drivers is in place.
In order to make use of the built-in 2.5G PHY the appropriate PHY driver
as well as (proprietary) PHY firmware has to be present as well.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/9072cefbff6db969720672ec98ed5cef65e8218c.1745715380.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This user of SHA-256 does not support any other algorithm, so the
crypto_shash abstraction provides no value. Just use the SHA-256
library API instead, which is much simpler and easier to use.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://patch.msgid.link/20250428191606.856198-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RTL8211F supports multiple WOL modes. This patch adds support for
magic packets.
The PHY notifies the system via the INTB/PMEB pin when a WOL event
occurs.
Signed-off-by: Daniel Braunwarth <daniel.braunwarth@kuka.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250429-realtek_wol-v2-1-8f84def1ef2c@kuka.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure the following prerequisites before executing the test:
1. 'socat' is installed on the remote host.
2. Python version supports socket.SO_INCOMING_CPU (available since v3.11).
Skip the test if either prerequisite is not met.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250430054801.750646-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allwinner A523 SoC variant (A527/T527) contains an "EMAC0" Ethernet
MAC compatible to the A64 version.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://patch.msgid.link/20250430-01-sun55i-emac0-v3-2-6fc000bbccbd@gentoo.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-04-29 (igb, igc, ixgbe, idpf)
For igb:
Kurt Kanzenbach adds linking of IRQs and queues to NAPI instances and
adds persistent NAPI config. Lastly, he removes undesired IRQs that
occur while busy polling.
For igc:
Kurt Kanzenbach switches the Tx mode for MQPRIO offload to harmonize the
current implementation with TAPRIO.
For ixgbe:
Jedrzej adds separate ethtool ops for E610 devices to account for device
differences.
Slawomir adds devlink region support for E610 devices.
For idpf:
Mateusz assigns and utilizes the ptype field out of libeth_rqe_info.
Michal removes unreachable code.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: remove unreachable code from setting mailbox
idpf: assign extracted ptype to struct libeth_rqe_info field
ixgbe: devlink: add devlink region support for E610
ixgbe: add E610 .set_phys_id() callback implementation
ixgbe: apply different rules for setting FC on E610
ixgbe: add support for ACPI WOL for E610
ixgbe: create E610 specific ethtool_ops structure
igc: Change Tx mode for MQPRIO offloading
igc: Limit netdev_tc calls to MQPRIO
igb: Get rid of spurious interrupts
igb: Add support for persistent NAPI config
igb: Link queues to NAPI instances
igb: Link IRQs to NAPI instances
====================
Link: https://patch.msgid.link/20250429234651.3982025-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous patch that added bounds check for create lease context
introduced a memory leak. When the bounds check fails, the function
returns NULL without freeing the previously allocated lease_ctx_info
structure.
This patch fixes the issue by adding kfree(lreq) before returning NULL
in both boundary check cases.
Fixes: bab703ed8472 ("ksmbd: add bounds check for create lease context")
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Client can send empty newname string to ksmbd server.
It will cause a kernel oops from d_alloc.
This patch return the error when attempting to rename
a file or directory with an empty new name string.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.15-2025-05-01:
amdgpu:
- Fix possible UAF in HDCP
- XGMI dma-buf fix
- NBIO 7.11 fix
- VCN 5.0.1 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250501185634.4132187-1-alexander.deucher@amd.com
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc5).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This actually reverts 86e92eeeb237 ("bcachefs: Annotate struct bch_xattr
with __counted_by()").
After the x_name, there is a value. According to the disscussion[1],
__counted_by assumes that the flexible array member contains exactly
the amount of elements that are specified. Now there are users came across
a false positive detection of an out of bounds write caused by
the __counted_by here[2], so revert that.
[1] https://lore.kernel.org/lkml/Zv8VDKWN1GzLRT-_@archlinux/T/#m0ce9541c5070146320efd4f928cc1ff8de69e9b2
[2] https://privatebin.net/?a0d4e97d590d71e1#9bLmp2Kb5NU6X6cZEucchDcu88HzUQwHUah8okKPReEt
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The original code would skip null delay pointers, but when the pointers
were converted to point within the spi_device struct, the check was not
updated to skip delays of zero. Hence all spi devices that didn't set
delays would fail to probe.
Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://patch.msgid.link/20250423-spi-tegra114-v1-1-2d608bcc12f9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function trace_adjust_address() is used to map addresses of modules
stored in the persistent memory and are also loaded in the current boot to
return the current address for the module.
If there's only one module entry, it will simply use that, otherwise it
performs a bsearch of the entry array to find the modules to offset with.
The issue is if there are no modules in the array. The code does not
account for that and ends up referencing the first element in the array
which does not exist and causes a crash.
If nr_entries is zero, exit out early as if this was a core kernel
address.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501151909.65910359@gandalf.local.home
Fixes: 35a380ddbc653 ("tracing: Show last module text symbols in the stacktrace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The check for a failed memory location is incorrectly checking
the wrong level of pointer indirection by checking !filter_hash
rather than !*filter_hash. Fix this.
Cc: asami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250422221335.89896-1-colin.i.king@gmail.com
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
drm/i915 fixes for v6.15-rc5:
- Fix build for CONFIG_DRM_I915_PXP=n
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/87selquhpe.fsf@intel.com
|
|
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.
Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14b0 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
00594 ------------[ cut here ]------------
00594 do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000003e51ef4a>] prepare_to_wait_event+0x5c/0x1c0
00594 WARNING: CPU: 12 PID: 1117 at kernel/sched/core.c:8741 __might_sleep+0x74/0x88
00594 Modules linked in:
00594 CPU: 12 UID: 0 PID: 1117 Comm: umount Not tainted 6.15.0-rc4-ktest-g3a72e369412d #21845 PREEMPT
00594 Hardware name: linux,dummy-virt (DT)
00594 pstate: 60001005 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00594 pc : __might_sleep+0x74/0x88
00594 lr : __might_sleep+0x74/0x88
00594 sp : ffffff80c8d67a90
00594 x29: ffffff80c8d67a90 x28: ffffff80f5903500 x27: 0000000000000000
00594 x26: 0000000000000000 x25: ffffff80cf5002a0 x24: ffffffc087dad000
00594 x23: ffffff80c8d67b40 x22: 0000000000000000 x21: 0000000000000000
00594 x20: 0000000000000242 x19: ffffffc080b92020 x18: 00000000ffffffff
00594 x17: 30303c5b20746120 x16: 74657320323d6574 x15: 617473203b474e49
00594 x14: 0000000000000001 x13: 00000000000c0000 x12: ffffff80facc0000
00594 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0800b0774
00594 x8 : c0000000fffbffff x7 : ffffffc087dac670 x6 : 00000000015fffa8
00594 x5 : ffffff80facbffa8 x4 : ffffff80fbd30b90 x3 : 0000000000000000
00594 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff80f5903500
00594 Call trace:
00594 __might_sleep+0x74/0x88 (P)
00594 __mutex_lock+0x64/0x8d8
00594 mutex_lock_nested+0x28/0x38
00594 bch2_fs_ec_flush+0xf8/0x128
00594 __bch2_fs_read_only+0x54/0x1d8
00594 bch2_fs_read_only+0x3e0/0x438
00594 __bch2_fs_stop+0x5c/0x250
00594 bch2_put_super+0x18/0x28
00594 generic_shutdown_super+0x6c/0x140
00594 bch2_kill_sb+0x1c/0x38
00594 deactivate_locked_super+0x54/0xd0
00594 deactivate_super+0x70/0x90
00594 cleanup_mnt+0xec/0x188
00594 __cleanup_mnt+0x18/0x28
00594 task_work_run+0x90/0xd8
00594 do_notify_resume+0x138/0x148
00594 el0_svc+0x9c/0xa0
00594 el0t_64_sync_handler+0x104/0x130
00594 el0t_64_sync+0x154/0x158
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Happy May Day.
Things have calmed down on our end (knock on wood), no outstanding
investigations. Including fixes from Bluetooth and WiFi.
Current release - fix to a fix:
- igc: fix lock order in igc_ptp_reset
Current release - new code bugs:
- Revert "wifi: iwlwifi: make no_160 more generic", fixes regression
to Killer line of devices reported by a number of people
- Revert "wifi: iwlwifi: add support for BE213", initial FW is too
buggy
- number of fixes for mld, the new Intel WiFi subdriver
Previous releases - regressions:
- wifi: mac80211: restore monitor for outgoing frames
- drv: vmxnet3: fix malformed packet sizing in vmxnet3_process_xdp
- eth: bnxt_en: fix timestamping FIFO getting out of sync on reset,
delivering stale timestamps
- use sock_gen_put() in the TCP fraglist GRO heuristic, don't assume
every socket is a full socket
Previous releases - always broken:
- sched: adapt qdiscs for reentrant enqueue cases, fix list
corruptions
- xsk: fix race condition in AF_XDP generic RX path, shared UMEM
can't be protected by a per-socket lock
- eth: mtk-star-emac: fix spinlock recursion issues on rx/tx poll
- btusb: avoid NULL pointer dereference in skb_dequeue()
- dsa: felix: fix broken taprio gate states after clock jump"
* tag 'net-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: vertexcom: mse102x: Fix RX error handling
net: vertexcom: mse102x: Add range check for CMD_RTS
net: vertexcom: mse102x: Fix LEN_MASK
net: vertexcom: mse102x: Fix possible stuck of SPI interrupt
net: hns3: defer calling ptp_clock_register()
net: hns3: fixed debugfs tm_qset size
net: hns3: fix an interrupt residual problem
net: hns3: store rx VLAN tag offload state for VF
octeon_ep: Fix host hang issue during device reboot
net: fec: ERR007885 Workaround for conventional TX
net: lan743x: Fix memleak issue when GSO enabled
ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations
net: use sock_gen_put() when sk_state is TCP_TIME_WAIT
bnxt_en: fix module unload sequence
bnxt_en: Fix ethtool -d byte order for 32-bit values
bnxt_en: Fix out-of-bound memcpy() during ethtool -w
bnxt_en: Fix coredump logic to free allocated buffer
bnxt_en: delay pci_alloc_irq_vectors() in the AER path
bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings()
bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan()
...
|