summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-06-01ASoC: simple-card: set cpu dai clk in hw_paramsDaniel Mack
The simple-card driver currently accepts a clock node in the cpu dai sub-node and only uses it as an alternative to the 'system-clock-frequency' property to get the current frequency. This patch adds another use of the passed clock node. If mclk-fs is specified, the clocks in cpu and codec dai sub-nodes will be set to the calculated rate (stream rate * mclk_fs) in hw_params. This allows platforms to pass tuneable clocks as phandle that will automatically be set to the right rates. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-31net-sysfs: Fix memory leak in XPS configurationAlexander Duyck
This patch reorders the error cases in showing the XPS configuration so that we hold off on memory allocation until after we have verified that we can support XPS on a given ring. Fixes: 184c449f91fe ("net: Add support for XPS with QoS via traffic classes") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31ixgbe: fix parsing of TC actions for HW offloadOndřej Hlavatý
The previous code was optimistic, accepting the offload of whole action chain when there was a single known action (drop/redirect). This results in offloading a rule which should not be offloaded, because its behavior cannot be reproduced in the hardware. For example: $ tc filter add dev eno1 parent ffff: protocol ip \ u32 ht 800: order 1 match tcp src 42 FFFF \ action mirred egress mirror dev enp1s16 pipe \ drop The controller is unable to mirror the packet to a VF, but still offloads the rule by dropping the packet. Change the approach of the function to a pessimistic one, rejecting the chain when an unknown action is found. This is better suited for future extensions. Note that both recognized actions always return TC_ACT_SHOT, therefore it is safe to ignore actions behind them. Signed-off-by: Ondřej Hlavatý <ohlavaty@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31Merge tag 'xfs-4.17-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fix from Darrick Wong: "Clear out i_mapping error state when we're reinitializing inodes. This last minute fix prevents writeback error state from persisting past the end of the in-core inode lifecycle and causing EIO errors to be reported to userspace when no error has occurred. This fix for the behavioral regression has been soaking in for-next for a while, but various fs developers persuaded me to try to get it upstream for 4.17 because the patch that broke things was introduced in 4.17-rc4" * tag 'xfs-4.17-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: fs: clear writeback errors in inode_init_always
2018-05-31net: ethernet: davinci_emac: fix error handling in probe()Dan Carpenter
The current error handling code has an issue where it does: if (priv->txchan) cpdma_chan_destroy(priv->txchan); The problem is that ->txchan is either valid or an error pointer (which would lead to an Oops). I've changed it to use multiple error labels so that the test can be removed. Also there were some missing calls to netif_napi_del(). Fixes: 3ef0fdb2342c ("net: davinci_emac: switch to new cpdma layer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net/ncsi: Fix array size in dumpit handlerSamuel Mendoza-Jonas
With CONFIG_CC_STACKPROTECTOR enabled the kernel panics as below when parsing a NCSI_CMD_PKG_INFO command: [ 150.149711] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 805cff08 [ 150.149711] [ 150.159919] CPU: 0 PID: 1301 Comm: ncsi-netlink Not tainted 4.13.16-468cbec6d2c91239332cb91b1f0a73aafcb6f0c6 #1 [ 150.170004] Hardware name: Generic DT based system [ 150.174852] [<80109930>] (unwind_backtrace) from [<80106bc4>] (show_stack+0x20/0x24) [ 150.182641] [<80106bc4>] (show_stack) from [<805d36e4>] (dump_stack+0x20/0x28) [ 150.189888] [<805d36e4>] (dump_stack) from [<801163ac>] (panic+0xdc/0x278) [ 150.196780] [<801163ac>] (panic) from [<801162cc>] (__stack_chk_fail+0x20/0x24) [ 150.204111] [<801162cc>] (__stack_chk_fail) from [<805cff08>] (ncsi_pkg_info_all_nl+0x244/0x258) [ 150.212912] [<805cff08>] (ncsi_pkg_info_all_nl) from [<804f939c>] (genl_lock_dumpit+0x3c/0x54) [ 150.221535] [<804f939c>] (genl_lock_dumpit) from [<804f873c>] (netlink_dump+0xf8/0x284) [ 150.229550] [<804f873c>] (netlink_dump) from [<804f8d44>] (__netlink_dump_start+0x124/0x17c) [ 150.237992] [<804f8d44>] (__netlink_dump_start) from [<804f9880>] (genl_rcv_msg+0x1c8/0x3d4) [ 150.246440] [<804f9880>] (genl_rcv_msg) from [<804f9174>] (netlink_rcv_skb+0xd8/0x134) [ 150.254361] [<804f9174>] (netlink_rcv_skb) from [<804f96a4>] (genl_rcv+0x30/0x44) [ 150.261850] [<804f96a4>] (genl_rcv) from [<804f7790>] (netlink_unicast+0x198/0x234) [ 150.269511] [<804f7790>] (netlink_unicast) from [<804f7ffc>] (netlink_sendmsg+0x368/0x3b0) [ 150.277783] [<804f7ffc>] (netlink_sendmsg) from [<804abea4>] (sock_sendmsg+0x24/0x34) [ 150.285625] [<804abea4>] (sock_sendmsg) from [<804ac1dc>] (___sys_sendmsg+0x244/0x260) [ 150.293556] [<804ac1dc>] (___sys_sendmsg) from [<804ad98c>] (__sys_sendmsg+0x5c/0x9c) [ 150.301400] [<804ad98c>] (__sys_sendmsg) from [<804ad9e4>] (SyS_sendmsg+0x18/0x1c) [ 150.308984] [<804ad9e4>] (SyS_sendmsg) from [<80102640>] (ret_fast_syscall+0x0/0x3c) [ 150.316743] ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 805cff08 This turns out to be because the attrs array in ncsi_pkg_info_all_nl() is initialised to a length of NCSI_ATTR_MAX which is the maximum attribute number, not the number of attributes. Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family") Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31Merge tag 'wireless-drivers-for-davem-2018-05-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.17 Two last minute fixes, hopefully they make it to 4.17 still. rt2x00 * revert a fix which caused even more problems iwlwifi * fix a crash when there are 16 or more logical CPUs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31cls_flower: Fix incorrect idr release when failing to modify rulePaul Blakey
When we fail to modify a rule, we incorrectly release the idr handle of the unmodified old rule. Fix that by checking if we need to release it. Fixes: fe2502e49b58 ("net_sched: remove cls_flower idr on failure") Reported-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net/sonic: Use dma_mapping_error()Finn Thain
With CONFIG_DMA_API_DEBUG=y, calling sonic_open() produces the message, "DMA-API: device driver failed to check map error". Add the missing dma_mapping_error() call. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31drm/amd/display: Update color props when modeset is requiredLeo (Sunpeng) Li
This fixes issues where color management properties don't persist over DPMS on/off, or when the CRTC is moved across connectors. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-31drm/amd/display: Make atomic-check validate underscan changesDavid Francis
When the underscan state was changed, atomic-check was triggering a validation but passing the old underscan values. This change adds a somewhat hacky check in dm_update_crtcs_state that will update the stream if old and newunderscan values are different. This was causing 4k on Fiji to allow underscan when it wasn't permitted. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-31ASoC: dapm: use match_string() helperXie Yisheng
match_string() returns the index of an array for a matching string, which can be used instead of open coded variant. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-31ASoC: max98095: use match_string() helperXie Yisheng
match_string() returns the index of an array for a matching string, which can be used instead of open coded variant. Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-31ASoC: max98088: use match_string() helperXie Yisheng
match_string() returns the index of an array for a matching string, which can be used instead of open coded variant. Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-31Merge tag 'platform-drivers-x86-v4.17-4' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fix from Andy Shevchenko: "Fix NULL pointer dereference in asus-wmi on rfkill cleanup. The effective change is just one new condition - two lines of code. But it required moving one static helper function, which is why the diff looks a bit bigger" * tag 'platform-drivers-x86-v4.17-4' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: asus-wmi: Fix NULL pointer dereference
2018-05-31platform/x86: asus-wmi: Fix NULL pointer dereferenceJoão Paulo Rechi Vita
Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-05-31Merge tag 'perf-urgent-for-mingo-4.17-20180531' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix 'perf test Session topology' segfault on s390 (Thomas Richter) - Fix NULL return handling in bpf__prepare_load() (YueHaibing) - Fix indexing on Coresight ETM packet queue decoder (Mathieu Poirier) - Fix perf.data format description of NRCPUS header (Arnaldo Carvalho de Melo) - Update perf.data documentation section on cpu topology - Handle uncore event aliases in small groups properly (Kan Liang) - Add missing perf_sample.addr into python sample dictionary (Leo Yan) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-31ASoC: Intel: bytcr_rt5651: Set card long_name based on quirksHans de Goede
Many X86 devices using a BYT SoC + RT5651 codec are cheap devices with generic DMI strings, causing snd_soc_set_dmi_name() to fail to set a long_name, making it impossible for userspace to have a correct UCM profile which knowns which input is connected to the internal mic, which input is connected to the hsmic (for correct jack-based switching) and which inputs are unused. Our quirks already specify which inputs the internal and headset mic are connected to. This commit sets a long_name based on the quirks so that userspace can have UCM profiles doing the right thing based on the long_name. Note that if we ever encounter the need for a special UCM profile for some device we can add a quirk to set a specific long_name for the device, Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-31sched/headers: Fix typoDavidlohr Bueso
I cannot spell 'throttling'. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180530224940.17839-1-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-31sched/deadline: Fix missing clock updateJuri Lelli
A missing clock update is causing the following warning: rq->clock_update_flags < RQCF_ACT_SKIP WARNING: CPU: 10 PID: 0 at kernel/sched/sched.h:963 inactive_task_timer+0x5d6/0x720 Call Trace: <IRQ> __hrtimer_run_queues+0x10f/0x530 hrtimer_interrupt+0xe5/0x240 smp_apic_timer_interrupt+0x79/0x2b0 apic_timer_interrupt+0xf/0x20 </IRQ> do_idle+0x203/0x280 cpu_startup_entry+0x6f/0x80 start_secondary+0x1b0/0x200 secondary_startup_64+0xa5/0xb0 hardirqs last enabled at (793919): [<ffffffffa27c5f6e>] cpuidle_enter_state+0x9e/0x360 hardirqs last disabled at (793920): [<ffffffffa2a0096e>] interrupt_entry+0xce/0xe0 softirqs last enabled at (793922): [<ffffffffa20bef78>] irq_enter+0x68/0x70 softirqs last disabled at (793921): [<ffffffffa20bef5d>] irq_enter+0x4d/0x70 This happens because inactive_task_timer() calls sub_running_bw() (if TASK_DEAD and non_contending) that might trigger a schedutil update, which might access the clock. Clock is however currently updated only later in inactive_task_timer() function. Fix the problem by updating the clock right after task_rq_lock(). Reported-by: kernel test robot <xiaolong.ye@intel.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Claudio Scordino <claudio@evidence.eu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luca Abeni <luca.abeni@santannapisa.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180530160809.9074-1-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-31ASoC: mt6797-mt6351: add hostless phone call pathKai Chieh Chuang
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-31ASoC: mt6797: add Hostless DAIKai Chieh Chuang
add path for hosltess lpbk from ADDA Capture to ADDA Playback add path for hostless phone call between ADDA DAI and PCM DAI Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-31ASoC: mt6797: add PCM interfaceKai Chieh Chuang
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-31ASoC: mediatek: export mtk-afe symbols as neededArnd Bergmann
The new mt6797-afe driver uses some functions in a common file, which works for a built-in driver but fails for a loadable module: ERROR: "mtk_afe_pcm_free" [sound/soc/mediatek/mt6797/snd-soc-mt6797-afe.ko] undefined! ERROR: "mtk_afe_add_sub_dai_control" [sound/soc/mediatek/mt6797/snd-soc-mt6797-afe.ko] undefined! ERROR: "mtk_afe_pcm_new" [sound/soc/mediatek/mt6797/snd-soc-mt6797-afe.ko] undefined! ERROR: "mtk_afe_combine_sub_dai" [sound/soc/mediatek/mt6797/snd-soc-mt6797-afe.ko] undefined! ERROR: "mtk_afe_pcm_ops" [sound/soc/mediatek/mt6797/snd-soc-mt6797-afe.ko] undefined! This exports the five symbols above for modules. Fixes: b3c702f56bf5 ("ASoC: mt6797: combine DAI to register component") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-31ASoC: codecs: PCM1789: include gpio/consumer.hArnd Bergmann
When CONFIG_GPIOLIB is disabled, this codec fails to build because gpio/consumer.h is not included implicitly. sound/soc/codecs/pcm1789.c: In function 'pcm1789_common_init': sound/soc/codecs/pcm1789.c:247:19: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_gpio_request_one'? [-Werror=implicit-function-declaration] pcm1789->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); ^~~~~~~~~~~~~~~~~~~~~~~ Fixes: 4ae340d1be36 ("ASoC: codecs: Add support for PCM1789") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-31sched/core: Require cpu_active() in select_task_rq(), for user tasksPaul Burton
select_task_rq() is used in a few paths to select the CPU upon which a thread should be run - for example it is used by try_to_wake_up() & by fork or exec balancing. As-is it allows use of any online CPU that is present in the task's cpus_allowed mask. This presents a problem because there is a period whilst CPUs are brought online where a CPU is marked online, but is not yet fully initialized - ie. the period where CPUHP_AP_ONLINE_IDLE <= state < CPUHP_ONLINE. Usually we don't run any user tasks during this window, but there are corner cases where this can happen. An example observed is: - Some user task A, running on CPU X, forks to create task B. - sched_fork() calls __set_task_cpu() with cpu=X, setting task B's task_struct::cpu field to X. - CPU X is offlined. - Task A, currently somewhere between the __set_task_cpu() in copy_process() and the call to wake_up_new_task(), is migrated to CPU Y by migrate_tasks() when CPU X is offlined. - CPU X is onlined, but still in the CPUHP_AP_ONLINE_IDLE state. The scheduler is now active on CPU X, but there are no user tasks on the runqueue. - Task A runs on CPU Y & reaches wake_up_new_task(). This calls select_task_rq() with cpu=X, taken from task B's task_struct, and select_task_rq() allows CPU X to be returned. - Task A enqueues task B on CPU X's runqueue, via activate_task() & enqueue_task(). - CPU X now has a user task on its runqueue before it has reached the CPUHP_ONLINE state. In most cases, the user tasks that schedule on the newly onlined CPU have no idea that anything went wrong, but one case observed to be problematic is if the task goes on to invoke the sched_setaffinity syscall. The newly onlined CPU reaches the CPUHP_AP_ONLINE_IDLE state before the CPU that brought it online calls stop_machine_unpark(). This means that for a portion of the window of time between CPUHP_AP_ONLINE_IDLE & CPUHP_ONLINE the newly onlined CPU's struct cpu_stopper has its enabled field set to false. If a user thread is executed on the CPU during this window and it invokes sched_setaffinity with a CPU mask that does not include the CPU it's running on, then when __set_cpus_allowed_ptr() calls stop_one_cpu() intending to invoke migration_cpu_stop() and perform the actual migration away from the CPU it will simply return -ENOENT rather than calling migration_cpu_stop(). We then return from the sched_setaffinity syscall back to the user task that is now running on a CPU which it just asked not to run on, and which is not present in its cpus_allowed mask. This patch resolves the problem by having select_task_rq() enforce that user tasks run on CPUs that are active - the same requirement that select_fallback_rq() already enforces. This should ensure that newly onlined CPUs reach the CPUHP_AP_ACTIVE state before being able to schedule user tasks, and also implies that bringup_wait_for_ap() will have called stop_machine_unpark() which resolves the sched_setaffinity issue above. I haven't yet investigated them, but it may be of interest to review whether any of the actions performed by hotplug states between CPUHP_AP_ONLINE_IDLE & CPUHP_AP_ACTIVE could have similar unintended effects on user tasks that might schedule before they are reached, which might widen the scope of the problem from just affecting the behaviour of sched_setaffinity. Signed-off-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180526154648.11635-2-paul.burton@mips.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-31sched/core: Fix rules for running on online && !active CPUsPeter Zijlstra
As already enforced by the WARN() in __set_cpus_allowed_ptr(), the rules for running on an online && !active CPU are stricter than just being a kthread, you need to be a per-cpu kthread. If you're not strictly per-CPU, you have better CPUs to run on and don't need the partially booted one to get your work done. The exception is to allow smpboot threads to bootstrap the CPU itself and get kernel 'services' initialized before we allow userspace on it. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 955dbdf4ce87 ("sched: Allow migrating kthreads into online but inactive CPUs") Link: http://lkml.kernel.org/r/20170725165821.cejhb7v2s3kecems@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-31xfrm Fix potential error pointer dereference in xfrm_bundle_create.Steffen Klassert
We may derference an invalid pointer in the error path of xfrm_bundle_create(). Fix this by returning this error pointer directly instead of assigning it to xdst0. Fixes: 45b018beddb6 ("ipsec: Create and use new helpers for dst child access.") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-05-30fs: clear writeback errors in inode_init_alwaysDarrick J. Wong
In inode_init_always(), we clear the inode mapping flags, which clears any retained error (AS_EIO, AS_ENOSPC) bits. Unfortunately, we do not also clear wb_err, which means that old mapping errors can leak through to new inodes. This is crucial for the XFS inode allocation path because we recycle old in-core inodes and we do not want error state from an old file to leak into the new file. This bug was discovered by running generic/036 and generic/047 in a loop and noticing that the EIOs generated by the collision of direct and buffered writes in generic/036 would survive the remount between 036 and 047, and get reported to the fsyncs (on different files!) in generic/047. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-05-31Merge tag 'drm-misc-fixes-2018-05-30' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes dw-hdmi: Fix Oops regression from rc1 (Neil) Cc: Neil Armstrong <narmstrong@baylibre.com> * tag 'drm-misc-fixes-2018-05-30' of git://anongit.freedesktop.org/drm/drm-misc: drm/bridge/synopsys: dw-hdmi: fix dw_hdmi_setup_rx_sense
2018-05-30Merge tag 'for-linus-20180530' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Just a single fix that should make it into this release, fixing a regression with T10-DIF on NVMe" * tag 'for-linus-20180530' of git://git.kernel.dk/linux-block: nvme: fix extended data LBA supported setting
2018-05-30Merge tag 'selinux-pr-20180530' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux fix from Paul Moore: "One more small fix for SELinux: a small string length fix found by KASAN. I dislike sending patches this late in the release cycle, but this patch fixes a legitimate problem, is very small, limited in scope, and well understood. There are two threads with more information on the problem, the latest is linked below: https://marc.info/?t=152723737400001&r=1&w=2 Stephen points out in the thread linked above: 'Such a setxattr() call can only be performed by a process with CAP_MAC_ADMIN that is also allowed mac_admin permission in SELinux policy. Consequently, this is never possible on Android (no process is allowed mac_admin permission, always enforcing) and is only possible in Fedora/RHEL for a few domains (if enforcing)'" * tag 'selinux-pr-20180530' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: KASAN: slab-out-of-bounds in xattr_getsecurity
2018-05-30Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a potential kernel panic in the inside-secure driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: inside-secure - do not use memset on MMIO
2018-05-30perf tools: Fix perf.data format description of NRCPUS headerArnaldo Carvalho de Melo
In the perf.data HEADER_CPUDESC feadure header we store first the number of available CPUs in the system, then the number of CPUs at the time of writing the header, not the other way around. Reported-by: Thomas-Mich Richter <tmricht@linux.ibm.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Lakshman Annadorai <lakshmana@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-j7o92acm2vnxjv70y4o3swoc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-30perf script python: Add addr into perf sample dictLeo Yan
ARM CoreSight auxtrace uses 'sample->addr' to record the target address for branch instructions, so the data of 'sample->addr' is required for tracing data analysis. This commit collects data of 'sample->addr' into perf sample dict, finally can be used for python script for parsing event. Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Walker <robert.walker@arm.com> Cc: Tor Jeremiassen <tor@ti.com> Cc: coresight@lists.linaro.org Cc: kim.phillips@arm.co Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1527497103-3593-3-git-send-email-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-30perf data: Update documentation section on cpu topologyThomas Richter
Add an explanation of each cpu's core and socket identifier to the perf.data file format documentation. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180528074433.16652-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-30perf cs-etm: Fix indexing for decoder packet queueMathieu Poirier
The tail of a queue is supposed to be pointing to the next available slot in a queue. In this implementation the tail is incremented before it is used and as such points to the last used element, something that has the immense advantage of centralizing tail management at a single location and eliminating a lot of redundant code. But this needs to be taken into consideration on the dequeueing side where the head also needs to be incremented before it is used, or the first available element of the queue will be skipped. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Walker <robert.walker@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1527289854-10755-1-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-30perf bpf: Fix NULL return handling in bpf__prepare_load()YueHaibing
bpf_object__open()/bpf_object__open_buffer can return error pointer or NULL, check the return values with IS_ERR_OR_NULL() in bpf__prepare_load and bpf__prepare_load_buffer Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: netdev@vger.kernel.org Link: https://lkml.kernel.org/n/tip-psf4xwc09n62al2cb9s33v9h@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-30drm/bridge/synopsys: dw-hdmi: fix dw_hdmi_setup_rx_senseNeil Armstrong
The dw_hdmi_setup_rx_sense exported function should not use struct device to recover the dw-hdmi context using drvdata, but take struct dw_hdmi directly like other exported functions. This caused a regression using Meson DRM on S905X since v4.17-rc1 : Internal error: Oops: 96000007 [#1] PREEMPT SMP [...] CPU: 0 PID: 124 Comm: irq/32-dw_hdmi_ Not tainted 4.17.0-rc7 #2 Hardware name: Libre Technology CC (DT) [...] pc : osq_lock+0x54/0x188 lr : __mutex_lock.isra.0+0x74/0x530 [...] Process irq/32-dw_hdmi_ (pid: 124, stack limit = 0x00000000adf418cb) Call trace: osq_lock+0x54/0x188 __mutex_lock_slowpath+0x10/0x18 mutex_lock+0x30/0x38 __dw_hdmi_setup_rx_sense+0x28/0x98 dw_hdmi_setup_rx_sense+0x10/0x18 dw_hdmi_top_thread_irq+0x2c/0x50 irq_thread_fn+0x28/0x68 irq_thread+0x10c/0x1a0 kthread+0x128/0x130 ret_from_fork+0x10/0x18 Code: 34000964 d00050a2 51000484 9135c042 (f864d844) ---[ end trace 945641e1fbbc07da ]--- note: irq/32-dw_hdmi_[124] exited with preempt_count 1 genirq: exiting task "irq/32-dw_hdmi_" (124) is an active IRQ thread (irq 32) Fixes: eea034af90c6 ("drm/bridge/synopsys: dw-hdmi: don't clobber drvdata") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1527673438-20643-1-git-send-email-narmstrong@baylibre.com
2018-05-30vhost_net: flush batched heads before trying to busy pollingJason Wang
After commit e2b3b35eb989 ("vhost_net: batch used ring update in rx"), we tend to batch updating used heads. But it doesn't flush batched heads before trying to do busy polling, this will cause vhost to wait for guest TX which waits for the used RX. Fixing by flush batched heads before busy loop. 1 byte TCP_RR performance recovers from 13107.83 to 50402.65. Fixes: e2b3b35eb989 ("vhost_net: batch used ring update in rx") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30ASoC: core: Fix return code shown on error for hw_paramsJon Hunter
When the call to hw_params for a component fails, the error code is held by the variable '__ret' but the error message displays the value held by the variable 'ret'. Fix the return code shown when hw_params fails for a component. Fixes: b8135864d4d3 ("ASoC: snd_soc_component_driver has snd_pcm_ops") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - a missing -msoft-float for the compile of the kexec purgatory - a fix for the dasd driver to avoid the double use of a field in the 'struct request' [ That latter one is being discussed, and Christoph asked for something cleaner, but for now it's a fix ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: use blk_mq_rq_from_pdu for per request data s390/purgatory: Fix endless interrupt loop
2018-05-30perf test: "Session topology" dumps core on s390Thomas Richter
The "perf test Session topology" entry fails with core dump on s390. The root cause is a NULL pointer dereference in function check_cpu_topology() line 76 (or line 82 without -v). The session->header.env.cpu variable is NULL because on s390 function process_cpu_topology() returns with error: socket_id number is too big. You may need to upgrade the perf tool. and releases the env.cpu variable via zfree() and sets it to NULL. Here is the gdb output: (gdb) n 76 pr_debug("CPU %d, core %d, socket %d\n", i, (gdb) n Program received signal SIGSEGV, Segmentation fault. 0x00000000010f4d9e in check_cpu_topology (path=0x3ffffffd6c8 "/tmp/perf-test-J6CHMa", map=0x14a1740) at tests/topology.c:76 76 pr_debug("CPU %d, core %d, socket %d\n", i, (gdb) Make sure the env.cpu variable is not used when its NULL. Test for NULL pointer and return TEST_SKIP if so. Output before: [root@p23lp27 perf]# ./perf test -F 39 39: Session topology :Segmentation fault (core dumped) [root@p23lp27 perf]# Output after: [root@p23lp27 perf]# ./perf test -vF 39 39: Session topology : --- start --- templ file: /tmp/perf-test-Ajx59D socket_id number is too big.You may need to upgrade the perf tool. ---- end ---- Session topology: Skip [root@p23lp27 perf]# Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180528073657.11743-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-30perf parse-events: Handle uncore event aliases in small groups properlyKan Liang
Perf stat doesn't count the uncore event aliases from the same uncore block in a group, for example: perf stat -e '{unc_m_cas_count.all,unc_m_clockticks}' -a -I 1000 # time counts unit events 1.000447342 <not counted> unc_m_cas_count.all 1.000447342 <not counted> unc_m_clockticks 2.000740654 <not counted> unc_m_cas_count.all 2.000740654 <not counted> unc_m_clockticks The output is very misleading. It gives a wrong impression that the uncore event doesn't work. An uncore block could be composed by several PMUs. An uncore event alias is a joint name which means the same event runs on all PMUs of a block. Perf doesn't support mixed events from different PMUs in the same group. It is wrong to put uncore event aliases in a big group. The right way is to split the big group into multiple small groups which only include the events from the same PMU. Only uncore event aliases from the same uncore block should be specially handled here. It doesn't make sense to mix the uncore events with other uncore events from different blocks or even core events in a group. With the patch: # time counts unit events 1.001557653 140,833 unc_m_cas_count.all 1.001557653 1,330,231,332 unc_m_clockticks 2.002709483 85,007 unc_m_cas_count.all 2.002709483 1,429,494,563 unc_m_clockticks Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Agustin Vega-Frias <agustinv@codeaurora.org> Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1525727623-19768-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-30ASoC: imx-audmux: add RXFS/RXCLK defines for 6-wire connectionsPhilipp Zabel
In asynchronous mode, a RxFS and RxClk connection needs to be made between two ports. Add a define for the bit to be set in the *SEL fields. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [m.felsch@pengutronix.de: fixed comment to include i.MX21 and 35] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-30ASoC: fix 0-day warnings with snd_soc_new_compress()Pierre-Louis Bossart
All conditionally-defined routines in include/sound/soc.h expose a static inline fallback to avoid 0-day warnings and compilation issues, except snd_soc_new_compress(). Fixes: 5db6aab6f36f ('ASoC: topology: Add support for compressed PCMs') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "We are switching a bunch of Lenovo devices with Synaptics touchpads from PS/2 emulation over to native RMI/SMbus. Given that all commits are marked for stable there is no point delaying them till next release" [ Also fix a too-small stack array for i2c communication in elan driver ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c_smbus - fix corrupted stack Input: synaptics - add Lenovo 80 series ids to SMBus Input: synaptics - add Intertouch support on X1 Carbon 6th and X280 Input: synaptics - Lenovo Thinkpad X1 Carbon G5 (2017) with Elantech trackpoints should use RMI Input: synaptics - Lenovo Carbon X1 Gen5 (2017) devices should use RMI
2018-05-30Merge branch 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes One last fix for 4.17. Fix a suspend regression in DC. * 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux: drm/amd/display: Fix BUG_ON during CRTC atomic check update
2018-05-30Merge tag 'drm-misc-fixes-2018-05-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes core: Add 220us psr setup time (Dhinakaran) omap: Fix NULL deref (Tomi) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> * tag 'drm-misc-fixes-2018-05-29' of git://anongit.freedesktop.org/drm/drm-misc: drm/omap: fix NULL deref crash with SDI displays drm/psr: Fix missed entry in PSR setup time table.
2018-05-29selinux: KASAN: slab-out-of-bounds in xattr_getsecuritySachin Grover
Call trace: [<ffffff9203a8d7a8>] dump_backtrace+0x0/0x428 [<ffffff9203a8dbf8>] show_stack+0x28/0x38 [<ffffff920409bfb8>] dump_stack+0xd4/0x124 [<ffffff9203d187e8>] print_address_description+0x68/0x258 [<ffffff9203d18c00>] kasan_report.part.2+0x228/0x2f0 [<ffffff9203d1927c>] kasan_report+0x5c/0x70 [<ffffff9203d1776c>] check_memory_region+0x12c/0x1c0 [<ffffff9203d17cdc>] memcpy+0x34/0x68 [<ffffff9203d75348>] xattr_getsecurity+0xe0/0x160 [<ffffff9203d75490>] vfs_getxattr+0xc8/0x120 [<ffffff9203d75d68>] getxattr+0x100/0x2c8 [<ffffff9203d76fb4>] SyS_fgetxattr+0x64/0xa0 [<ffffff9203a83f70>] el0_svc_naked+0x24/0x28 If user get root access and calls security.selinux setxattr() with an embedded NUL on a file and then if some process performs a getxattr() on that file with a length greater than the actual length of the string, it would result in a panic. To fix this, add the actual length of the string to the security context instead of the length passed by the userspace process. Signed-off-by: Sachin Grover <sgrover@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by: Paul Moore <paul@paul-moore.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 23:45:26 +0000