| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm fixes from Dave Airlie:
"Radeon and amdkfd fixes.
Radeon ones mostly for oops in some test/benchmark functions since
fencing changes, and one regression fix for old GPUs,
There is one cirrus regression fix, the 32bpp broke userspace, so this
hides it behind a module option for the few users who care.
I'm off for a few days, so this is probably the final pull I have, if
I see fixes from Intel I'll forward the pull as I should have email"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/cirrus: Limit modes depending on bpp option
drm/radeon: fix the crash in test functions
drm/radeon: fix the crash in benchmark functions
drm/radeon: properly set vm fragment size for TN/RL
drm/radeon: don't init gpuvm if accel is disabled (v3)
drm/radeon: fix PLLs on RS880 and older v2
drm/amdkfd: Don't create BUG due to incorrect user parameter
drm/amdkfd: max num of queues can't be 0
drm/amdkfd: Fix bug in accounting of queues
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of driver specific fixes:
- Disable DMA mode for i.MX6DL chips due to a hardware bug.
- Don't use devm_kzalloc() outside of bind/unbind paths in the
fsl-dspi driver, fixing memory leaks"
* tag 'spi-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: use pio mode for i.mx6dl
spi: spi-fsl-dspi: Remove usage of devm_kzalloc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI power management fix from Rafael Wysocki:
"This is a revert of an ACPI Low-power Subsystem (LPSS) driver change
that was supposed to improve power management of the LPSS DMA
controller, but introduced more serious problems.
Since fixing them turns out to be non-trivial, it is better to revert
the commit in question at this point and try to fix the original issue
differently in the next cycle"
* tag 'pm+acpi-3.19-fin' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Enumeration
- Scan all device numbers on NEC as well as Stratus (Charlotte Richardson)
Resource management
- Handle read-only BARs on AMD CS553x devices (Myron Stowe)
Synopsys DesignWare
- Reject MSI-X IRQs (Lucas Stach)"
* tag 'pci-v3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Handle read-only BARs on AMD CS553x devices
PCI: Add NEC variants to Stratus ftServer PCIe DMI check
PCI: designware: Reject MSI-X IRQs
|
|
return type of wait_for_completion_timeout is unsigned long not int, this
patch uses the return value of wait_for_completion_timeout in the condition
directly rather than adding a additional appropriately typed variable.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
return type of wait_for_completion_timeout is unsigned long not int, this
patch uses the return value of wait_for_completion_timeout in the condition
directly rather than assigning it to an incorrect type variable.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds new regulator driver to support max77843
MFD(Multi Function Device) chip`s regulators.
The Max77843 has two voltage regulators for USB safeout.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit e9de688dac65 ("irqchip: mips-gic: Support local interrupts")
changed the GIC irqchip driver so that all local interrupts were routed
to the same CPU pin used for external interrupts. Unfortunately this
causes a regression when smp-cmp is used. The CPUs are started by the
bootloader and put in a timer based waiting poll loop, but when their
timer interrupts are rerouted to a different IRQ pin which is not
unmasked they never wake up.
Since smp-cmp support is deprecated and everybody who was using it
should be switching to smp-cps which brings up the secondary CPUs
without bootloader assistance, I've gone for the simple fix which can be
easily removed once smp-cmp is removed, rather than a fully generic fix.
In __gic_init() the local GIC_VPE_TIMER_MAP register is read to find the
boot-time routing of the local timer interrupt, and a chained handler is
added to that CPU pin as well as the normal one.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Fixes: e9de688dac65 ("irqchip: mips-gic: Support local interrupts")
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Patchwork: https://patchwork.linux-mips.org/patch/9081/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fixes following sparse warnings :
net/ipv6/sit.c:1509:32: warning: incorrect type in assignment (different base types)
net/ipv6/sit.c:1509:32: expected restricted __be16 [usertype] sport
net/ipv6/sit.c:1509:32: got unsigned short
net/ipv6/sit.c:1514:32: warning: incorrect type in assignment (different base types)
net/ipv6/sit.c:1514:32: expected restricted __be16 [usertype] dport
net/ipv6/sit.c:1514:32: got unsigned short
net/ipv6/sit.c:1711:38: warning: incorrect type in argument 3 (different base types)
net/ipv6/sit.c:1711:38: expected unsigned short [unsigned] [usertype] value
net/ipv6/sit.c:1711:38: got restricted __be16 [usertype] sport
net/ipv6/sit.c:1713:38: warning: incorrect type in argument 3 (different base types)
net/ipv6/sit.c:1713:38: expected unsigned short [unsigned] [usertype] value
net/ipv6/sit.c:1713:38: got restricted __be16 [usertype] dport
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
include/net/ipv6.h:713:22: warning: incorrect type in assignment (different base types)
include/net/ipv6.h:713:22: expected restricted __be32 [usertype] hash
include/net/ipv6.h:713:22: got unsigned int
include/net/ipv6.h:719:25: warning: restricted __be32 degrades to integer
include/net/ipv6.h:719:22: warning: invalid assignment: ^=
include/net/ipv6.h:719:22: left side has type restricted __be32
include/net/ipv6.h:719:22: right side has type unsigned int
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netdev_adjacent_add_links() and netdev_adjacent_del_links()
are static.
queue->qdisc has __rcu annotation, need to use RCU_INIT_POINTER()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
(struct flow_keys)->n_proto is in network order, use
proper type for this.
Fixes following sparse errors :
net/core/flow_dissector.c:139:39: warning: incorrect type in assignment (different base types)
net/core/flow_dissector.c:139:39: expected unsigned short [unsigned] [usertype] n_proto
net/core/flow_dissector.c:139:39: got restricted __be16 [assigned] [usertype] proto
net/core/flow_dissector.c:237:23: warning: incorrect type in assignment (different base types)
net/core/flow_dissector.c:237:23: expected unsigned short [unsigned] [usertype] n_proto
net/core/flow_dissector.c:237:23: got restricted __be16 [assigned] [usertype] proto
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: e0f31d849867 ("flow_keys: Record IP layer protocol in skb_flow_dissect()")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
info is in network byte order, change it back to host byte order
before use. In particular, the current code sets the MTU of the tunnel
to a wrong (too big) value.
Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After d75b1ade567f ("net: less interrupt masking in NAPI")
driver's NAPI poll routine is expected to return
exact budget value if it wants to be re-called.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Fixes: d75b1ade567f ("net: less interrupt masking in NAPI")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I noticed some CLOCK_TAI timer test failures on one of my
less-frequently used configurations. And after digging in I
found in 76f4108892d9 (Cleanup hrtimer accessors to the
timekepeing state), the hrtimer_get_softirq_time tai offset
calucation was incorrectly rewritten, as the tai offset we
return shold be from CLOCK_MONOTONIC, and not CLOCK_REALTIME.
This results in CLOCK_TAI timers expiring early on non-highres
capable machines.
This patch fixes the issue, calculating the tai time properly
from the monotonic base.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable <stable@vger.kernel.org> # 3.17+
Link: http://lkml.kernel.org/r/1423097126-10236-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The RSS support requires enablement based on the features reported by
the hardware. The setting of this flag is missing. Add support to
set the RSS enablement flag based on the reported hardware features.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The number of traffic classes reported by the hardware is zero-based
so increment the value returned to get an actual count.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In tcf_exts_dump_stats(), ensure that exts->actions is not empty before
accessing the first element of that list and calling tcf_action_copy_stats()
on it. This fixes some random segvs when adding filters of type "basic" with
no particular action.
This also fixes the dumping of those "no-action" filters, which more often
than not made calls to tcf_action_copy_stats() fail and consequently netlink
attributes added by the caller to be removed by a call to nla_nest_cancel().
Fixes: 33be62715991 ("net_sched: act: use standard struct list_head")
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Configuring fq with quantum 0 hangs the system, presumably because of a
non-interruptible infinite loop. Either way quantum 0 does not make sense.
Reproduce with:
sudo tc qdisc add dev lo root fq quantum 0 initial_quantum 0
ping 127.0.0.1
Signed-off-by: Kenneth Klette Jonassen <kennetkl@ifi.uio.no>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add missing blk_finish_plug in btrfs_sync_log()
Signed-off-by: Forrest Liu <forrestl@synology.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
The commit [8975626ea35a: drm/cirrus: allow 32bpp framebuffers for
cirrus drm] broke X modesetting driver because cirrus driver still
provides the full list of modes up to 1280x1024 while the 32bpp can
support only up to 800x600.
We might be able to filter out the invalid modes in mode_valid
callback, but unfortunately the bpp in question can't be referred
there for now (let me know if there is a better way to retrieve the
bpp for the probed fb).
So, instead, this patch adds the bpp module option to specify the
maximal bpp explicitly and limits the resolutions in get_modes
depending on its value.
The default value is set to 24 so that the existing stuff keeps
working. If you need a new 32bpp feature, specify cirrus.bpp=32
option explicitly.
Fixes: 8975626ea35a ('drm/cirrus: allow 32bpp framebuffers for cirrus drm')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Max unacked packets/bytes is an int while sizeof(long) was used in the
sysctl table.
This means that when they were getting read we'd also leak kernel memory
to userspace along with the timeout values.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In virtio 1.0 mode, when mergeable buffers are enabled on a big-endian
host, num_buffers wasn't byte-swapped correctly, so large incoming
packets got corrupted.
To fix, fill it in within hdr - this also makes sure it gets
the correct type.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch correct the bad expression while writing the
bit-pattern from software's buffer to hardware registers.
Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commone register macors (e.g. RSR) is too commont to drivers, it may
be conflict with the architectures (e.g. xtensa, sh).
The related warnings (with allmodconfig under xtensa):
CC [M] drivers/net/usb/sr9700.o
In file included from drivers/net/usb/sr9700.c:24:0:
drivers/net/usb/sr9700.h:65:0: warning: "RSR" redefined
#define RSR 0x06
^
In file included from ./arch/xtensa/include/asm/bitops.h:22:0,
from include/linux/bitops.h:36,
from include/linux/kernel.h:10,
from include/linux/list.h:8,
from include/linux/module.h:9,
from drivers/net/usb/sr9700.c:13:
./arch/xtensa/include/asm/processor.h:190:0: note: this is the location of the previous definition
#define RSR(v,sr) __asm__ __volatile__ ("rsr %0,"__stringify(sr) : "=a"(v));
^
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
spi-linus
|
|
return type of wait_for_completion_timeout is unsigned long not int and
always returns >=0 , this patch adds a suitable return variable and
simplifies the return value checking as there is no < 0 case.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
return type of wait_for_completion_timeout is unsigned long not int, this
patch uses the return value of wait_for_completion_timeout in the condition
directly rather than assigning it to an incorrect type variable.
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
return type of wait_for_completion_timeout is unsigned long not int, this
patch changes the type of m from int to unsigned long.
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SMBus access functions assume that 16-bit values are formatted as
little endian numbers. The direct i2c access functions in regmap,
however, assume that 16-bit values are formatted as big endian numbers.
As a result, the current code returns different values if an i2c chip's
16-bit registers are accessed through i2c access functions vs. SMBus
access functions.
Use regmap_smbus_read_word_swapped and regmap_smbus_write_word_swapped
for 16-bit SMBus accesses if a chip is configured as REGMAP_ENDIAN_BIG.
If the chip is configured as REGMAP_ENDIAN_LITTLE, keep using
regmap_smbus_write_word_data and regmap_smbus_read_word_data. Otherwise
reject registration if the controller does not support direct i2c accesses.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We'll need to call it from regmap-i2c.c, which can be built as module.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the include of mach/dma.h to the legacy PXA DMA code where it is used.
This enables building spi-pxa2xx on ARM64.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull cifs fixes from Steve French:
"Three small cifs fixes. One fixes a hang under stress, and the other
two are security related"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix MUST SecurityFlags filtering
Complete oplock break jobs before closing file handle
cifs: use memzero_explicit to clear stack buffer
|
|
Pull ARM fixes from Russell King:
"A number of ARM fixes, the biggest is fixing a regression caused by
appended DT blobs exceeding 64K, causing the decompressor fixup code
to fail to patch the DT blob. Another important fix is for the ASID
allocator from Will Deacon which prevents some rare crashes seen on
some systems. Lastly, there's a build fix for v7M systems when printk
support is disabled.
The last two remaining fixes are more cosmetic - the IOMMU one
prevents an annoying harmless warning message, and we disable the
kernel strict memory permissions on non-MMU which can't support it
anyway"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8299/1: mm: ensure local active ASID is marked as allocated on rollover
ARM: 8298/1: ARM_KERNMEM_PERMS only works with MMU enabled
ARM: 8295/1: fix v7M build for !CONFIG_PRINTK
ARM: 8294/1: ATAG_DTB_COMPAT: remove the DT workspace's hardcoded 64KB size
ARM: 8288/1: dma-mapping: don't detach devices without an IOMMU during teardown
|
|
Register 2 is alredy overwritten by the return value when
syscall_trace_leave() is called.
Signed-off-by: Lars Persson <larper@axis.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9187/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
These are generated by very recent toolchains and result in an error
message when attenpting to convert a kernel from ELF to ECOFF.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The if construct was getting hard to read and would be getting even more
complex with the next bug fix.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
return type of wait_for_completion_timeout is unsigned long not int, this
patch adds an appropriate variable and fixes up the assignment. It removes
the else branch as the only thing it was doing is assigning ret = 0; - but
ret is never used thereafter so that is not needed. As the string in
dev_err already states "timeout" there is little point in printing the 0.
A typo in "trasfer" -> transfer is also fixed.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add missing stubs for regulator_suspend_prepare() and
regulator_suspend_finish() to fix exynos_defconfig build without
REGULATOR:
arch/arm/mach-exynos/built-in.o: In function `exynos_suspend_finish':
arch/arm/mach-exynos/suspend.c:537: undefined reference to `regulator_suspend_finish'
arch/arm/mach-exynos/built-in.o: In function `exynos_suspend_prepare':
arch/arm/mach-exynos/suspend.c:520: undefined reference to `regulator_suspend_prepare'
make: *** [vmlinux] Error 1
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: Joerg Roedel <joro@8bytes.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the adjusments made as part of perf_event_task_tick() use the
percpu rotation lists to iterate over any active PMU contexts, but these
are not used by the context rotation code, having been replaced by
separate (per-context) hrtimer callbacks. However, some manipulation of
the rotation lists (i.e. removal of contexts) has remained in
perf_rotate_context(). This leads to the following issues:
* Contexts are not always removed from the rotation lists. Removal of
PMUs which have been placed in rotation lists, but have not been
removed by a hrtimer callback can result in corruption of the rotation
lists (when memory backing the context is freed).
This has been observed to result in hangs when PMU drivers built as
modules are inserted and removed around the creation of events for
said PMUs.
* Contexts which do not require rotation may be removed from the
rotation lists as a result of a hrtimer, and will not be considered by
the unthrottling code in perf_event_task_tick.
This patch fixes the issue by updating the rotation ist when events are
scheduled in/out, ensuring that each rotation list stays in sync with
the HW state. As each event holds a refcount on the module of its PMU,
this ensures that when a PMU module is unloaded none of its CPU contexts
can be in a rotation list. By maintaining a list of perf_event_contexts
rather than perf_event_cpu_contexts, we don't need separate paths to
handle the cpu and task contexts, which also makes the code a little
simpler.
As the rotation_list variables are not used for rotation, these are
renamed to active_ctx_list, which better matches their current function.
perf_pmu_rotate_{start,stop} are renamed to
perf_pmu_ctx_{activate,deactivate}.
Reported-by: Johannes Jensen <johannes.jensen@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Will Deacon <Will.Deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150129134511.GR17721@leverpostej
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When initialising an event, perf_init_event will call try_module_get() to
ensure that the PMU's module cannot be removed for the lifetime of the
event, with __free_event() dropping the reference when the event is
finally destroyed. If something fails after the event has been
initialised, but before the event is installed, perf_event_alloc will
drop the reference on the module.
However, if we fail to initialise an event for some reason (e.g. we ask
an uncore PMU to perform sampling, and it refuses to initialise the
event), we do not drop the refcount. If we try to open such a bogus
event without a precise IDR type, we will loop over each PMU in the pmus
list, incrementing each of their refcounts without decrementing them.
This patch adds a module_put when pmu->event_init(event) fails, ensuring
that the refcounts are balanced in failure cases. As the innards of the
precise and search based initialisation look very similar, this logic is
hoisted out into a new helper function. While the early return for the
failed try_module_get is removed from the search case, this is handled
by the remaining return when ret is not -ENOENT.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420642611-22667-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently we flag available data (via poll syscall) on perf fd with
POLL_IN macro, which is normally used for SIGIO interface.
We've been lucky, because POLLIN (0x1) is subset of POLL_IN (0x20001)
and sys_poll (do_pollfd function) cut the extra bit out (0x20000).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422467678-22341-1-git-send-email-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So what I suspect; but I'm in zombie mode today it seems; is that while
I initially thought that it was impossible for ctx to change when
refcount dropped to 0, I now suspect its possible.
Note that until perf_remove_from_context() the event is still active and
visible on the lists. So a concurrent sys_perf_event_open() from another
task into this task can race.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: mark.rutland@arm.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150129134434.GB26304@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Jiri reported triggering the new WARN_ON_ONCE in event_sched_out over
the weekend:
event_sched_out.isra.79+0x2b9/0x2d0
group_sched_out+0x69/0xc0
ctx_sched_out+0x106/0x130
task_ctx_sched_out+0x37/0x70
__perf_install_in_context+0x70/0x1a0
remote_function+0x48/0x60
generic_exec_single+0x15b/0x1d0
smp_call_function_single+0x67/0xa0
task_function_call+0x53/0x80
perf_install_in_context+0x8b/0x110
I think the below should cure this; if we install a group leader it
will iterate the (still intact) group list and find its siblings and
try and install those too -- even though those still have the old
event->ctx -- in the new ctx.
Upon installing the first group sibling we'd try and schedule out the
group and trigger the above warn.
Fix this by installing the group leader last, installing siblings
would have no effect, they're not reachable through the group lists
and therefore we don't schedule them.
Also delay resetting the state until we're absolutely sure the events
are quiescent.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Reported-by: vincent.weaver@maine.edu
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150126162639.GA21418@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There have been a few reported issues wrt. the lack of locking around
changing event->ctx. This patch tries to address those.
It avoids the whole rwsem thing; and while it appears to work, please
give it some thought in review.
What I did fail at is sensible runtime checks on the use of
event->ctx, the RCU use makes it very hard.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150123125834.209535886@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add a few WARN()s to catch things that should never happen.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150123125834.150481799@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Vladislav Yasevich says:
====================
Restore UFO support to virtio_net devices
commit 3d0ad09412ffe00c9afa201d01effdb6023d09b4
Author: Ben Hutchings <ben@decadent.org.uk>
Date: Thu Oct 30 18:27:12 2014 +0000
drivers/net: Disable UFO through virtio
Turned off UFO support to virtio-net based devices due to issues
with IPv6 fragment id generation for UFO packets. The issue
was that IPv6 UFO/GSO implementation expects the fragment id
to be supplied in skb_shinfo(). However, for packets generated
by the VMs, the fragment id is not supplied which causes all
IPv6 fragments to have the id of 0.
The problem is that turning off UFO support on tap/macvtap
as well as virtio devices caused issues with migrations.
Migrations would fail when moving a vm from a kernel supporting
expecting UFO to work to the newer kernels that disabled UFO.
This series provides a partial solution to address the migration
issue. The series allows us to track whether skb_shinfo()->ip6_frag_id
has been set by treating value of 0 as unset.
This lets GSO code to generate fragment ids if they are necessary
(ex: packet was generated by VM or packet socket).
Since v3:
- Resolved build issue when IPv6 is a module.
- Removed trailing white space.
Since v2:
- Rebase and rebuild to make sure everything works. No changes
to the patches were done.
Since v1:
- Removed the skb bit and use value of 0 as tracker.
- Used Eric's suggestion to set fragment id as 0x80000000 if id
generation procedure yeilded a 0 result.
- Consolidated ipv6 id genration code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 3d0ad09412ffe00c9afa201d01effdb6023d09b4.
Now that GSO functionality can correctly track if the fragment
id has been selected and select a fragment id if necessary,
we can re-enable UFO on tap/macvap and virtio devices.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 5188cd44c55db3e92cd9e77a40b5baa7ed4340f7.
Now that GSO layer can track if fragment id has been selected
and can allocate one if necessary, we don't need to do this in
tap and macvtap. This reverts most of the code and only keeps
the new ipv6 fragment id generation function that is still needed.
Fixes: 3d0ad09412ff (drivers/net: Disable UFO through virtio)
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the IPv6 fragment id has not been set and we perform
fragmentation due to UFO, select a new fragment id.
We now consider a fragment id of 0 as unset and if id selection
process returns 0 (after all the pertrubations), we set it to
0x80000000, thus giving us ample space not to create collisions
with the next packet we may have to fragment.
When doing UFO integrity checking, we also select the
fragment id if it has not be set yet. This is stored into
the skb_shinfo() thus allowing UFO to function correclty.
This patch also removes duplicate fragment id generation code
and moves ipv6_select_ident() into the header as it may be
used during GSO.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
