summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-16serial: 8250_pci: Add Realtek 816a and 816bTobias Diedrich
These serial ports are exposed by the OOB-management-engine on RealManage-enabled network cards (e.g. AMD DASH enabled systems using Realtek cards). Because these have 3 BARs, they fail the "num_iomem <= 1" check in serial_pci_guess_board. I've manually checked the two IOMEM regions and BAR 2 doesn't seem to respond to reads, but BAR 4 seems to be an MMIO version of the IO ports (untested). With this change, the ports are detected: 0000:02:00.1: ttyS0 at I/O 0x2200 (irq = 82, base_baud = 115200) is a 16550A 0000:02:00.2: ttyS1 at I/O 0x2100 (irq = 55, base_baud = 115200) is a 16550A lspci output: 02:00.1 0700: 10ec:816a (rev 0e) (prog-if 02 [16550]) Subsystem: 17aa:5082 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 82 IOMMU group: 11 Region 0: I/O ports at 2200 [size=256] Region 2: Memory at fd715000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at fd704000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s (ok), Width x1 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data Not readable Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [170 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Capabilities: [178 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=150us PortTPowerOnTime=150us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=0us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us 02:00.2 0700: 10ec:816b (rev 0e) [...same...] Signed-off-by: Tobias Diedrich <tobiasdiedrich@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200914173628.GA22508@yamamaya.is-a-geek.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16serial: core: fix console port-lock regressionJohan Hovold
Fix the port-lock initialisation regression introduced by commit a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") by making sure that the lock is again initialised during console setup. The console may be registered before the serial controller has been probed in which case the port lock needs to be initialised during console setup by a call to uart_set_options(). The console-detach changes introduced a regression in several drivers by effectively removing that initialisation by not initialising the lock when the port is used as a console (which is always the case during console setup). Add back the early lock initialisation and instead use a new console-reinit flag to handle the case where a console is being re-attached through sysfs. The question whether the console-detach interface should have been added in the first place is left for another discussion. Note that the console-enabled check in uart_set_options() is not redundant because of kgdboc, which can end up reinitialising an already enabled console (see commit 42b6a1baa3ec ("serial_core: Don't re-initialize a previously initialized spinlock.")). Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Cc: stable <stable@vger.kernel.org> # 5.7 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200909143101.15389-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16serial: core: fix port-lock initialisationJohan Hovold
Commit f743061a85f5 ("serial: core: Initialise spin lock before use in uart_configure_port()") tried to work around a breakage introduced by commit a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") by adding a second initialisation of the port lock when registering the port. As reported by the build robots [1], this doesn't really solve the regression introduced by the console-detach changes and also adds a second redundant initialisation of the lock for normal ports. Start cleaning up this mess by removing the redundant initialisation and making sure that the port lock is again initialised once-only for ports that aren't already in use as a console. [1] https://lore.kernel.org/r/20200802054852.GR23458@shao2-debian Fixes: f743061a85f5 ("serial: core: Initialise spin lock before use in uart_configure_port()") Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Cc: stable <stable@vger.kernel.org> # 5.7 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200909143101.15389-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16usb: typec: intel_pmc_mux: Handle SCU IPC error conditionsMadhusudanarao Amara
Check and return if there are errors. The response bits are valid only on no errors. Fixes: b7404a29cd3d ("usb: typec: intel_pmc_mux: Definitions for response status bits") Signed-off-by: Madhusudanarao Amara <madhusudanarao.amara@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200916091102.27118-4-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebookPenghao
Add a USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for the BYD zhaoxin notebook. This notebook come with usb touchpad. And we would like to disable touchpad wakeup on this notebook by default. Signed-off-by: Penghao <penghao@uniontech.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200907023026.28189-1-penghao@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16USB: UAS: fix disconnect by unplugging a hubOliver Neukum
The SCSI layer can go into an ugly loop if you ignore that a device is gone. You need to report an error in the command rather than in the return value of the queue method. We need to specifically check for ENODEV. The issue goes back to the introduction of the driver. Fixes: 115bb1ffa54c3 ("USB: Add UAS driver") Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200916094026.30085-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16usb: typec: ucsi: Prevent mode overrunHeikki Krogerus
Sometimes the embedded controller firmware does not terminate the list of alternate modes that the partner supports in its response to the GET_ALTERNATE_MODES command. Instead the firmware returns the supported alternate modes over and over again until the driver stops requesting them. If that happens, the number of modes for each alternate mode will exceed the maximum 6 that is defined in the USB Power Delivery specification. Making sure that can't happen by adding a check for it. This fixes NULL pointer dereference that is caused by the overrun. Fixes: ad74b8649beaf ("usb: typec: ucsi: Preliminary support for alternate modes") Cc: stable@vger.kernel.org Reported-by: Zwane Mwaikambo <zwanem@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200916090034.25119-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16usb: typec: ucsi: acpi: Increase command completion timeout valueHeikki Krogerus
UCSI specification quite clearly states that if a command can't be completed in 10ms, the firmware must notify about BUSY condition. Unfortunately almost none of the platforms (the firmware on them) generate the BUSY notification even if a command can't be completed in time. The driver already considered that, and used a timeout value of 5 seconds, but processing especially the alternate mode discovery commands takes often considerable amount of time from the firmware, much more than the 5 seconds. That happens especially after bootup when devices are already connected to the USB Type-C connector. For now on those platforms the alternate mode discovery has simply failed because of the timeout. To improve the situation, increasing the timeout value for the command completion to 1 minute. That should give enough time for even the slowest firmware to process the commands. Fixes: f56de278e8ec ("usb: typec: ucsi: acpi: Move to the new API") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200916090034.25119-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16drm/i915: Filter wake_flags passed to default_wake_functionChris Wilson
(NOTE: This is the minimal backportable fix, a full fix is being developed at https://patchwork.freedesktop.org/patch/388048/) The flags passed to the wait_entry.func are passed onwards to try_to_wake_up(), which has a very particular interpretation for its wake_flags. In particular, beyond the published WF_SYNC, it has a few internal flags as well. Since we passed the fence->error down the chain via the flags argument, these ended up in the default_wake_function confusing the kernel/sched. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2110 Fixes: ef4688497512 ("drm/i915: Propagate fence errors") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728152144.1100-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Joonas: Rebased and reordered into drm-intel-gt-next branch] [Joonas: Added a note and link about more complete fix] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit f4b3c395540aa3d4f5a6275c5bdd83ab89034806) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-09-16drm/i915: Be wary of data races when reading the active execlistsChris Wilson
To implement preempt-to-busy (and so efficient timeslicing and best utilization of the hardware submission ports) we let the GPU run asynchronously in respect to the ELSP submission queue. This created challenges in keeping and accessing the driver state mirroring the asynchronous GPU execution. The latest occurence of this was spotted by KCSAN: [ 1413.563200] BUG: KCSAN: data-race in __await_execution+0x217/0x370 [i915] [ 1413.563221] [ 1413.563236] race at unknown origin, with read to 0xffff88885bb6c478 of 8 bytes by task 9654 on cpu 1: [ 1413.563548] __await_execution+0x217/0x370 [i915] [ 1413.563891] i915_request_await_dma_fence+0x4eb/0x6a0 [i915] [ 1413.564235] i915_request_await_object+0x421/0x490 [i915] [ 1413.564577] i915_gem_do_execbuffer+0x29b7/0x3c40 [i915] [ 1413.564967] i915_gem_execbuffer2_ioctl+0x22f/0x5c0 [i915] [ 1413.564998] drm_ioctl_kernel+0x156/0x1b0 [ 1413.565022] drm_ioctl+0x2ff/0x480 [ 1413.565046] __x64_sys_ioctl+0x87/0xd0 [ 1413.565069] do_syscall_64+0x4d/0x80 [ 1413.565094] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To complicate matters, we have to both avoid the read tearing of *active and avoid any write tearing as perform the pending[] -> inflight[] promotion of the execlists. This is because we cannot rely on the memcpy doing u64 aligned copies on all kernels/platforms and so we opt to open-code it with explicit WRITE_ONCE annotations to satisfy KCSAN. v2: When in doubt, write the same comment again. v3: Expanded commit message. Fixes: b55230e5e800 ("drm/i915: Check for awaits on still currently executing requests") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Joonas: Rebased and reordered into drm-intel-gt-next branch] [Joonas: Added expanded commit message from Tvrtko and Chris] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit b4d9145b0154f8c71dafc2db5fd445f1f3db9426) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-09-16drm/i915/gem: Reduce context termination list iteration guard to RCUChris Wilson
As we now protect the timeline list using RCU, we can drop the timeline->mutex for guarding the list iteration during context close, as we are searching for an inflight request. Any new request will see the context is banned and not be submitted. In doing so, pull the checks for a concurrent submission of the request (notably the i915_request_completed()) under the engine spinlock, to fully serialise with __i915_request_submit()). That is in the case of preempt-to-busy where the request may be completed during the __i915_request_submit(), we need to be careful that we sample the request status after serialising so that we don't miss the request the engine is actually submitting. Fixes: 4a3174152147 ("drm/i915/gem: Refine occupancy test in kill_context()") References: d22d2d073ef8 ("drm/i915: Protect i915_request_await_start from early waits") # rcu protection of timeline->requests References: https://gitlab.freedesktop.org/drm/intel/-/issues/1622 References: https://gitlab.freedesktop.org/drm/intel/-/issues/2158 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200806105954.7766-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 736e785f9b28cd9ef2d16a80960a04fd00e64b22) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-09-16drm/i915/gem: Delay tracking the GEM context until it is registeredChris Wilson
Avoid exposing a partially constructed context by deferring the list_add() from the initial construction to the end of registration. Otherwise, if we peek into the list of contexts from inside debugfs, we may see the partially constructed context and chase down some dangling incomplete pointers. Reported-by: CQ Tang <cq.tang@intel.com> Fixes: 3aa9945a528e ("drm/i915: Separate GEM context construction and registration to userspace") References: f6e8aa387171 ("drm/i915: Report the number of closed vma held by each context in debugfs") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: CQ Tang <cq.tang@intel.com> Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200730092856.23615-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit eb4dedae920a07c485328af3da2202ec5184fb17) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-09-15Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "Just one fix in libsas for a resource leak in an error path" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: Fix error path in sas_notify_lldd_dev_found()
2020-09-15Merge tag 'fixes-v5.9a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer fix from James Morris: "A device_cgroup RCU warning fix from Amol Grover" * tag 'fixes-v5.9a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: device_cgroup: Fix RCU list debugging warning
2020-09-15Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: "Two patches from Michael and Dexuan to fix vmbus hanging issues" * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload Drivers: hv: vmbus: hibernation: do not hang forever in vmbus_bus_resume()
2020-09-15drm/amdgpu/dc: Require primary plane to be enabled whenever the CRTC isMichel Dänzer
Don't check drm_crtc_state::active for this either, per its documentation in include/drm/drm_crtc.h: * Hence drivers must not consult @active in their various * &drm_mode_config_funcs.atomic_check callback to reject an atomic * commit. atomic_remove_fb disables the CRTC as needed for disabling the primary plane. This prevents at least the following problems if the primary plane gets disabled (e.g. due to destroying the FB assigned to the primary plane, as happens e.g. with mutter in Wayland mode): * The legacy cursor ioctl returned EINVAL for a non-0 cursor FB ID (which enables the cursor plane). * If the cursor plane was enabled, changing the legacy DPMS property value from off to on returned EINVAL. v2: * Minor changes to code comment and commit log, per review feedback. GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1108 GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1165 GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1344 Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/radeon: revert "Prefer lower feedback dividers"Christian König
Turns out this breaks a lot of different hardware. This reverts commit fc8c70526bd30733ea8667adb8b8ffebea30a8ed. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdgpu: Include sienna_cichlid in USBC PD FW support.Andrey Grodzovsky
Create sysfs interface also for sienna_cichlid. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amd/display: update nv1x stutter latenciesJun Lei
[why] Recent characterization shows increased stutter latencies on some SKUs, leading to underflow. [how] Update SOC params to account for this worst case latency. Signed-off-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amd/display: Don't use DRM_ERROR() for DTM add topologyBhawanpreet Lakha
[Why] Previously we were only calling add_topology when hdcp was being enabled. Now we call add_topology by default so the ERROR messages are printed if the firmware is not loaded. This error message is not relevant for normal display functionality so no need to print a ERROR message. [How] Change DRM_ERROR to DRM_INFO Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amd/pm: support runtime pptable update for sienna_cichlid etc.Jiansong Chen
This avoids smu issue when enabling runtime pptable update for sienna_cichlid and so on. Runtime pptable udpate is needed for test and debug purpose. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdkfd: fix a memory leak issueDennis Li
In the resume stage of GPU recovery, start_cpsch will call pm_init which set pm->allocated as false, cause the next pm_release_ib has no chance to release ib memory. Add pm_release_ib in stop_cpsch which will be called in the suspend stage of GPU recovery. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/kfd: fix a system crash issue during GPU recoveryDennis Li
The crash log as the below: [Thu Aug 20 23:18:14 2020] general protection fault: 0000 [#1] SMP NOPTI [Thu Aug 20 23:18:14 2020] CPU: 152 PID: 1837 Comm: kworker/152:1 Tainted: G OE 5.4.0-42-generic #46~18.04.1-Ubuntu [Thu Aug 20 23:18:14 2020] Hardware name: GIGABYTE G482-Z53-YF/MZ52-G40-00, BIOS R12 05/13/2020 [Thu Aug 20 23:18:14 2020] Workqueue: events amdgpu_ras_do_recovery [amdgpu] [Thu Aug 20 23:18:14 2020] RIP: 0010:evict_process_queues_cpsch+0xc9/0x130 [amdgpu] [Thu Aug 20 23:18:14 2020] Code: 49 8d 4d 10 48 39 c8 75 21 eb 44 83 fa 03 74 36 80 78 72 00 74 0c 83 ab 68 01 00 00 01 41 c6 45 41 00 48 8b 00 48 39 c8 74 25 <80> 78 70 00 c6 40 6d 01 74 ee 8b 50 28 c6 40 70 00 83 ab 60 01 00 [Thu Aug 20 23:18:14 2020] RSP: 0018:ffffb29b52f6fc90 EFLAGS: 00010213 [Thu Aug 20 23:18:14 2020] RAX: 1c884edb0a118914 RBX: ffff8a0d45ff3c00 RCX: ffff8a2d83e41038 [Thu Aug 20 23:18:14 2020] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff8a0e2e4178c0 [Thu Aug 20 23:18:14 2020] RBP: ffffb29b52f6fcb0 R08: 0000000000001b64 R09: 0000000000000004 [Thu Aug 20 23:18:14 2020] R10: ffffb29b52f6fb78 R11: 0000000000000001 R12: ffff8a0d45ff3d28 [Thu Aug 20 23:18:14 2020] R13: ffff8a2d83e41028 R14: 0000000000000000 R15: 0000000000000000 [Thu Aug 20 23:18:14 2020] FS: 0000000000000000(0000) GS:ffff8a0e2e400000(0000) knlGS:0000000000000000 [Thu Aug 20 23:18:14 2020] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Thu Aug 20 23:18:14 2020] CR2: 000055c783c0e6a8 CR3: 00000034a1284000 CR4: 0000000000340ee0 [Thu Aug 20 23:18:14 2020] Call Trace: [Thu Aug 20 23:18:14 2020] kfd_process_evict_queues+0x43/0xd0 [amdgpu] [Thu Aug 20 23:18:14 2020] kfd_suspend_all_processes+0x60/0xf0 [amdgpu] [Thu Aug 20 23:18:14 2020] kgd2kfd_suspend.part.7+0x43/0x50 [amdgpu] [Thu Aug 20 23:18:14 2020] kgd2kfd_pre_reset+0x46/0x60 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_amdkfd_pre_reset+0x1a/0x20 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_device_gpu_recover+0x377/0xf90 [amdgpu] [Thu Aug 20 23:18:14 2020] ? amdgpu_ras_error_query+0x1b8/0x2a0 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_ras_do_recovery+0x159/0x190 [amdgpu] [Thu Aug 20 23:18:14 2020] process_one_work+0x20f/0x400 [Thu Aug 20 23:18:14 2020] worker_thread+0x34/0x410 When GPU hang, user process will fail to create a compute queue whose struct object will be freed later, but driver wrongly add this queue to queue list of the proccess. And then kfd_process_evict_queues will access a freed memory, which cause a system crash. v2: The failure to execute_queues should probably not be reported to the caller of create_queue, because the queue was already created. Therefore change to ignore the return value from execute_queues. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-09-15efi: efibc: check for efivars write capabilityArd Biesheuvel
Branden reports that commit f88814cc2578c1 ("efi/efivars: Expose RT service availability via efivars abstraction") regresses UEFI platforms that implement GetVariable but not SetVariable when booting kernels that have EFIBC (bootloader control) enabled. The reason is that EFIBC is a user of the efivars abstraction, which was updated to permit users that rely only on the read capability, but not on the write capability. EFIBC is in the latter category, so it has to check explicitly whether efivars supports writes. Fixes: f88814cc2578c1 ("efi/efivars: Expose RT service availability via efivars abstraction") Tested-by: Branden Sherrell <sherrellbc@gmail.com> Link: https://lore.kernel.org/linux-efi/AE217103-C96F-4AFC-8417-83EC11962004@gmail.com/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-09-15perf test: Free formats for perf pmu parse testNamhyung Kim
The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f956ec4a1 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-15perf metric: Do not free metric when failed to resolveNamhyung Kim
It's dangerous to free the original metric when it's called from resolve_metric() as it's already in the metric_list and might have other resources too. Instead, it'd better let them bail out and be released properly at the later stage. So add a check when it's called from metricgroup__add_metric() and release it. Also make sure that mp is set properly. Fixes: 83de0b7d535de ("perf metric: Collect referenced metrics in struct metric_ref_node") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-10-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-15perf metric: Free metric when it failed to resolveNamhyung Kim
The metricgroup__add_metric() can find multiple match for a metric group and it's possible to fail. Also it can fail in the middle like in resolve_metric() even for single metric. In those cases, the intermediate list and ids will be leaked like: Direct leak of 3 byte(s) in 1 object(s) allocated from: #0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683 #2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906 #3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940 #4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993 #5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045 #6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087 #7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164 #8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196 #9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318 #10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356 #11 0x55f7e70be09b in run_test tests/builtin-test.c:410 #12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 83de0b7d535de ("perf metric: Collect referenced metrics in struct metric_ref_node") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-9-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-15perf metric: Release expr_parse_ctx after testingNamhyung Kim
The test_generic_metric() missed to release entries in the pctx. Asan reported following leak (and more): Direct leak of 128 byte(s) in 1 object(s) allocated from: #0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14) #2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497) #3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111 #4 0x55f7e7341667 in expr__add_ref util/expr.c:120 #5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783 #6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858 #7 0x55f7e712390b in compute_single tests/parse-metric.c:128 #8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180 #9 0x55f7e712446d in compute_metric tests/parse-metric.c:196 #10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295 #11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355 #12 0x55f7e70be09b in run_test tests/builtin-test.c:410 #13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 6d432c4c8aa56 ("perf tools: Add test_generic_metric function") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-15perf test: Fix memory leaks in parse-metric testNamhyung Kim
It didn't release resources when there's an error so the test_recursion_fail() will leak some memory. Fixes: 0a507af9c681a ("perf tests: Add parse metric test for ipc metric") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-15perf parse-event: Fix memory leak in evsel->unitNamhyung Kim
The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb114e3025 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-15perf evlist: Fix cpu/thread map leakNamhyung Kim
Asan reported leak of cpu and thread maps as they have one more refcount than released. I found that after setting evlist maps it should release it's refcount. It seems to be broken from the beginning so I chose the original commit as the culprit. But not sure how it's applied to stable trees since there are many changes in the code after that. Fixes: 7e2ed097538c5 ("perf evlist: Store pointer to the cpu and thread maps") Fixes: 4112eb1899c0e ("perf evlist: Default to syswide target when no thread/cpu maps set") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-15perf metric: Fix some memory leaks - part 2Namhyung Kim
The metric_event_delete() missed to free expr->metric_events and it should free an expr when metric_refs allocation failed. Fixes: 4ea2896715e67 ("perf metric: Collect referenced metrics in struct metric_expr") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-15perf metric: Fix some memory leaksNamhyung Kim
I found some memory leaks while reading the metric code. Some are real and others only occur in the error path. When it failed during metric or event parsing, it should release all resources properly. Fixes: b18f3e365019d ("perf stat: Support JSON metrics in perf stat") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-15perf test: Free aliases for PMU event map aliases testNamhyung Kim
The aliases were never released causing the following leaks: Indirect leak of 1224 byte(s) in 9 object(s) allocated from: #0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628) #1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322 #2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778 #3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295 #4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367 #5 0x56332c76a09b in run_test tests/builtin-test.c:410 #6 0x56332c76a09b in test_and_print tests/builtin-test.c:440 #7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695 #8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807 #9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 956a78356c24c ("perf test: Test pmu-events aliases") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-11-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-15perf vendor events amd: Remove trailing commasHenry Burns
The amdzen2/core.json and amdzen/core.json vendor events files have the occasional trailing comma. Since that goes against the JSON standard, lets remove it. Signed-off-by: Henry Burns <henrywolfeburns@gmail.com> Acked-by: Kim Phillips <kim.phillips@amd.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vijay Thakkar <vijaythakkar@me.com> Link: http://lore.kernel.org/lkml/20200915004125.971-1-henrywolfeburns@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-15Merge tag 'thunderbolt-for-v5.9-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: thunderbolt: Fix for v5.9-rc6 One more fix that makes ASUS PA27AC Thunderbolt 3 monitor work more reliably. This has been in linux-next with no reported issues. * tag 'thunderbolt-for-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Retry DROM read once if parsing fails
2020-09-15MIPS: SNI: Fix MIPS_L1_CACHE_SHIFTThomas Bogendoerfer
Commit 930beb5ac09a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") forgot to select the correct MIPS_L1_CACHE_SHIFT for SNI RM. This breaks non coherent DMA because of a wrong allocation alignment. Fixes: 930beb5ac09a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-15EDAC/ghes: Check whether the driver is on the safe list correctlyBorislav Petkov
With CONFIG_DEBUG_TEST_DRIVER_REMOVE=y, a system would try to probe, unregister and probe again a driver. When ghes_edac is attempted to be loaded on a system which is not on the safe platforms list, ghes_edac_register() would return early. The unregister counterpart ghes_edac_unregister() would still attempt to unregister and exit early at the refcount test, leading to the refcount underflow below. In order to not do *anything* on the unregister path too, reuse the force_load parameter and check it on that path too, before fumbling with the refcount. ghes_edac: ghes_edac_register: entry ghes_edac: ghes_edac_register: return -ENODEV ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 10 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xb9/0x100 Modules linked in: CPU: 10 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #12 Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018 RIP: 0010:refcount_warn_saturate+0xb9/0x100 Code: 82 e8 fb 8f 4d 00 90 0f 0b 90 90 c3 80 3d 55 4c f5 00 00 75 88 c6 05 4c 4c f5 00 01 90 48 c7 c7 d0 8a 10 82 e8 d8 8f 4d 00 90 <0f> 0b 90 90 c3 80 3d 30 4c f5 00 00 0f 85 61 ff ff ff c6 05 23 4c RSP: 0018:ffffc90000037d58 EFLAGS: 00010292 RAX: 0000000000000026 RBX: ffff88840b8da000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff8216b24f RDI: 00000000ffffffff RBP: ffff88840c662e00 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000046 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88840ee80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000800002211000 CR4: 00000000003506e0 Call Trace: ghes_edac_unregister ghes_remove platform_drv_remove really_probe driver_probe_device device_driver_attach __driver_attach ? device_driver_attach ? device_driver_attach bus_for_each_dev bus_add_driver driver_register ? bert_init ghes_init do_one_initcall ? rcu_read_lock_sched_held kernel_init_freeable ? rest_init kernel_init ret_from_fork ... ghes_edac: ghes_edac_unregister: FALSE, refcount: -1073741824 Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200911164950.GB19320@zn.tnic
2020-09-15EDAC/ghes: Clear scanned data on unloadBorislav Petkov
Commit b972fdba8665 ("EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()") didn't clear all the information from the scanned system and, more specifically, left ghes_hw.num_dimms to its previous value. On a second load (CONFIG_DEBUG_TEST_DRIVER_REMOVE=y), the driver would use the leftover num_dimms value which is not 0 and thus the 0 check in enumerate_dimms() will get bypassed and it would go directly to the pointer deref: d = &hw->dimms[hw->num_dimms]; which is, of course, NULL: #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #7 Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018 RIP: 0010:enumerate_dimms.cold+0x7b/0x375 Reset the whole ghes_hw on driver unregister so that no stale values are used on a second system scan. Fixes: b972fdba8665 ("EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()") Cc: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200911164817.GA19320@zn.tnic
2020-09-14Merge tag 'for-5.9-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "One of the recent lockdep fixes introduced a bug that breaks the search ioctl, which is used by some applications (bees, compsize). The patch made it to stable trees so we need this fixup to make it work again" * tag 'for-5.9-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix wrong address when faulting in pages in the search ioctl
2020-09-14perf test: Leader sampling shouldn't clear sample periodIan Rogers
Add test that a sibling with leader sampling doesn't have its period cleared. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200912025655.1337192-5-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-14perf record: Don't clear event's period if set by a termIan Rogers
If events in a group explicitly set a frequency or period with leader sampling, don't disable the samples on those events. Prior to 5.8: perf record -e '{cycles/period=12345000/,instructions/period=6789000/}:S' would clear the attributes then apply the config terms. In commit 5f34278867b7 leader sampling configuration was moved to after applying the config terms, in the example, making the instructions' event have its period cleared. This change makes it so that sampling is only disabled if configuration terms aren't present. Committer testing: Before: # perf record -e '{cycles/period=1/,instructions/period=2/}:S' sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.051 MB perf.data (6 samples) ] # # perf evlist -v cycles/period=1/: size: 120, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, disabled: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 instructions/period=2/: size: 120, config: 0x1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, sample_id_all: 1, exclude_guest: 1 # After: # perf record -e '{cycles/period=1/,instructions/period=2/}:S' sleep 0.0001 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (4 samples) ] # perf evlist -v cycles/period=1/: size: 120, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, disabled: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 instructions/period=2/: size: 120, config: 0x1, { sample_period, sample_freq }: 2, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, sample_id_all: 1, exclude_guest: 1 # Fixes: 5f34278867b7 ("perf evlist: Move leader-sampling configuration") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Link: http://lore.kernel.org/lkml/20200912025655.1337192-4-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-14tools headers UAPI: update linux/in.h copyArnaldo Carvalho de Melo
To get the changes from: 645f08975f49441b ("net: Fix some comments") That don't cause any changes in tooling, its just a typo fix. This silences this tools/perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h' diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-14tools headers UAPI: Sync kvm.h headers with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes in: 15e9e35cd1dec2bc ("KVM: MIPS: Change the definition of kvm type") 004a01241c5a0d37 ("arm64/x86: KVM: Introduce steal-time cap") That do not result in any change in tooling, as the additions are not being used in any table generator. This silences these perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Jones <drjones@redhat.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-14perf record: Prevent override of attr->sample_period for libpfm4 eventsStephane Eranian
Before: $ perf record -c 10000 --pfm-events=cycles:period=77777 Would yield a cycles event with period=10000, instead of 77777. the event string and perf record initializing the event. This was due to an ordering issue between libpfm4 parsing events with attr->sample_period != 0 by the time intent of the author. perf_evsel__config() is invoked. This seems to have been the This patch fixes the problem by preventing override for Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Link: http://lore.kernel.org/lkml/20200912025655.1337192-3-irogers@google.com Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-14perf record: Set PERF_RECORD_PERIOD if attr->freq is set.David Sharp
evsel__config() would only set PERF_RECORD_PERIOD if it set attr->freq from perf record options. When it is set by libpfm events, it would not get set. This changes evsel__config to see if attr->freq is set outside of whether or not it changes attr->freq itself. Signed-off-by: David Sharp <dhsharp@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: david sharp <dhsharp@google.com> Link: http://lore.kernel.org/lkml/20200912025655.1337192-2-irogers@google.com Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-14perf bench: Fix 2 memory sanitizer warningsIan Rogers
Memory sanitizer warns if a write is performed where the memory being read for the write is uninitialized. Avoid this warning by initializing the memory. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200912053725.1405857-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-14perf test: Fix the "signal" test inline assemblyJiri Olsa
When compiling with DEBUG=1 on Fedora 32 I'm getting crash for 'perf test signal': Program received signal SIGSEGV, Segmentation fault. 0x0000000000c68548 in __test_function () (gdb) bt #0 0x0000000000c68548 in __test_function () #1 0x00000000004d62e9 in test_function () at tests/bp_signal.c:61 #2 0x00000000004d689a in test__bp_signal (test=0xa8e280 <generic_ ... #3 0x00000000004b7d49 in run_test (test=0xa8e280 <generic_tests+1 ... #4 0x00000000004b7e7f in test_and_print (t=0xa8e280 <generic_test ... #5 0x00000000004b8927 in __cmd_test (argc=1, argv=0x7fffffffdce0, ... ... It's caused by the symbol __test_function being in the ".bss" section: $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [28] .bss NOBITS 0000000000c356a0 008346a0 00000000000511f8 0000000000000000 WA 0 0 32 $ nm perf | grep __test_function 0000000000c68548 B __test_function I guess most of the time we're just lucky the inline asm ended up in the ".text" section, so making it specific explicit with push and pop section clauses. $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [13] .text PROGBITS 0000000000431240 00031240 0000000000306faa 0000000000000000 AX 0 0 16 $ nm perf | grep __test_function 00000000004d62c8 T __test_function Committer testing: $ readelf -wi ~/bin/perf | grep producer -m1 <c> DW_AT_producer : (indirect string, offset: 0x254a): GNU C99 10.2.1 20200723 (Red Hat 10.2.1-1) -mtune=generic -march=x86-64 -ggdb3 -std=gnu99 -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ^^^^^ ^^^^^ ^^^^^ $ Before: $ perf test signal 20: Breakpoint overflow signal handler : FAILED! $ After: $ perf test signal 20: Breakpoint overflow signal handler : Ok $ Fixes: 8fd34e1cce18 ("perf test: Improve bp_signal") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lore.kernel.org/lkml/20200911130005.1842138-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-14core/entry: Report syscall correctly for trace and auditKees Cook
On v5.8 when doing seccomp syscall rewrites (e.g. getpid into getppid as seen in the seccomp selftests), trace (and audit) correctly see the rewritten syscall on entry and exit: seccomp_bpf-1307 [000] .... 22974.874393: sys_enter: NR 110 (... seccomp_bpf-1307 [000] .N.. 22974.874401: sys_exit: NR 110 = 1304 With mainline we see a mismatched enter and exit (the original syscall is incorrectly visible on entry): seccomp_bpf-1030 [000] .... 21.806766: sys_enter: NR 39 (... seccomp_bpf-1030 [000] .... 21.806767: sys_exit: NR 110 = 1027 When ptrace or seccomp change the syscall, this needs to be visible to trace and audit at that time as well. Update the syscall earlier so they see the correct value. Fixes: d88d59b64ca3 ("core/entry: Respect syscall number rewrites") Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200912005826.586171-1-keescook@chromium.org
2020-09-14Input: trackpoint - add new trackpoint variant IDsVincent Huang
Add trackpoint variant IDs to allow supported control on Synaptics trackpoints. Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com> Link: https://lore.kernel.org/r/20200914120327.2592-1-vincent.huang@tw.synaptics.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 05:35:13 +0000