Age | Commit message (Collapse) | Author |
|
Insert parameterized test for the drm_fb_clip_offset() to ensure
correctness and prevent future regressions.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814-gsoc-drm-format-test-v2-v3-3-bd3e9f9bc2fb@riseup.net
|
|
Insert parameterized test for the drm_fb_swab() to ensure correctness
and prevent future regressions.
Each expected color has it bytes reversed in order, so xrgb would be
bgrx.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814-gsoc-drm-format-test-v2-v3-2-bd3e9f9bc2fb@riseup.net
|
|
Test the default pitch fallback when NULL is passed as the dst_pitch on
the conversion procedures.
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814-gsoc-drm-format-test-v2-v3-1-bd3e9f9bc2fb@riseup.net
|
|
When building with clang 18 I see the following warning:
| drivers/gpu/drm/tiny/repaper.c:952:11: warning: cast to smaller integer
| type 'enum repaper_model' from 'const void *' [-Wvoid-pointer-to-enum-cast]
| 952 | model = (enum repaper_model)match;
|
This is due to the fact that `match` is a void* while `enum repaper_model`
has the size of an int.
Add uintptr_t cast to silence clang warning while also keeping enum cast
for readability and consistency with other `model` assignment just a
few lines below:
| model = (enum repaper_model)spi_id->driver_data;
Link: https://github.com/ClangBuiltLinux/linux/issues/1910
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816-void-drivers-gpu-drm-tiny-repaper-v1-1-9d8d10f0d52f@google.com
|
|
These declarations are not implemented now, remove them.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817133754.36524-1-yuehaibing@huawei.com
|
|
Because the gma_irq_install() is call after psb_gem_mm_init() function,
when psb_gem_mm_init() fails, the interrupt line haven't been allocated.
Yet the gma_irq_uninstall() is called in the psb_driver_unload() function
without checking if checking the irq is registered or not.
The calltrace is appended as following:
[ 20.539253] ioremap memtype_reserve failed -16
[ 20.543895] gma500 0000:00:02.0: Failure to map stolen base.
[ 20.565049] ------------[ cut here ]------------
[ 20.565066] Trying to free already-free IRQ 16
[ 20.565087] WARNING: CPU: 1 PID: 381 at kernel/irq/manage.c:1893 free_irq+0x209/0x370
[ 20.565316] CPU: 1 PID: 381 Comm: systemd-udevd Tainted: G C 6.5.0-rc1+ #368
[ 20.565329] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./IMB-140D Plus, BIOS P1.10 11/18/2013
[ 20.565338] RIP: 0010:free_irq+0x209/0x370
[ 20.565357] Code: 41 5d 41 5e 41 5f 5d 31 d2 89 d1 89 d6 89 d7 41 89 d1 c3 cc cc cc cc 8b 75 d0 48 c7 c7 e0 77 12 9f 4c 89 4d c8 e8 57 fe f4 ff <0f> 0b 48 8b 75 c8 4c 89 f7 e8 29 f3 f1 00 49 8b 47 40 48 8b 40 78
[ 20.565369] RSP: 0018:ffffae3b40733808 EFLAGS: 00010046
[ 20.565382] RAX: 0000000000000000 RBX: ffff9f8082bfe000 RCX: 0000000000000000
[ 20.565390] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 20.565397] RBP: ffffae3b40733840 R08: 0000000000000000 R09: 0000000000000000
[ 20.565405] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f80871c3100
[ 20.565413] R13: ffff9f80835d3360 R14: ffff9f80835d32a4 R15: ffff9f80835d3200
[ 20.565424] FS: 00007f13d36458c0(0000) GS:ffff9f8138880000(0000) knlGS:0000000000000000
[ 20.565434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 20.565441] CR2: 00007f0d046f3f20 CR3: 0000000006c8c000 CR4: 00000000000006e0
[ 20.565450] Call Trace:
[ 20.565458] <TASK>
[ 20.565470] ? show_regs+0x72/0x90
[ 20.565488] ? free_irq+0x209/0x370
[ 20.565504] ? __warn+0x8d/0x160
[ 20.565520] ? free_irq+0x209/0x370
[ 20.565536] ? report_bug+0x1bb/0x1d0
[ 20.565555] ? handle_bug+0x46/0x90
[ 20.565572] ? exc_invalid_op+0x19/0x80
[ 20.565587] ? asm_exc_invalid_op+0x1b/0x20
[ 20.565607] ? free_irq+0x209/0x370
[ 20.565625] ? free_irq+0x209/0x370
[ 20.565644] gma_irq_uninstall+0x15b/0x1e0 [gma500_gfx]
[ 20.565728] psb_driver_unload+0x27/0x190 [gma500_gfx]
[ 20.565800] psb_pci_probe+0x5d2/0x790 [gma500_gfx]
[ 20.565873] local_pci_probe+0x48/0xb0
[ 20.565892] pci_device_probe+0xc8/0x280
[ 20.565912] really_probe+0x1d2/0x440
[ 20.565929] __driver_probe_device+0x8a/0x190
[ 20.565944] driver_probe_device+0x23/0xd0
[ 20.565957] __driver_attach+0x10f/0x220
[ 20.565971] ? __pfx___driver_attach+0x10/0x10
[ 20.565984] bus_for_each_dev+0x7a/0xe0
[ 20.566002] driver_attach+0x1e/0x30
[ 20.566014] bus_add_driver+0x127/0x240
[ 20.566029] driver_register+0x64/0x140
[ 20.566043] ? __pfx_psb_init+0x10/0x10 [gma500_gfx]
[ 20.566111] __pci_register_driver+0x68/0x80
[ 20.566128] psb_init+0x2c/0xff0 [gma500_gfx]
[ 20.566194] do_one_initcall+0x46/0x330
[ 20.566214] ? kmalloc_trace+0x2a/0xb0
[ 20.566233] do_init_module+0x6a/0x270
[ 20.566250] load_module+0x207f/0x23a0
[ 20.566278] init_module_from_file+0x9c/0xf0
[ 20.566293] ? init_module_from_file+0x9c/0xf0
[ 20.566315] idempotent_init_module+0x184/0x240
[ 20.566335] __x64_sys_finit_module+0x64/0xd0
[ 20.566352] do_syscall_64+0x59/0x90
[ 20.566366] ? ksys_mmap_pgoff+0x123/0x270
[ 20.566378] ? __secure_computing+0x9b/0x110
[ 20.566392] ? exit_to_user_mode_prepare+0x39/0x190
[ 20.566406] ? syscall_exit_to_user_mode+0x2a/0x50
[ 20.566420] ? do_syscall_64+0x69/0x90
[ 20.566433] ? do_syscall_64+0x69/0x90
[ 20.566445] ? do_syscall_64+0x69/0x90
[ 20.566458] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 20.566472] RIP: 0033:0x7f13d351ea3d
[ 20.566485] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 a3 0f 00 f7 d8 64 89 01 48
[ 20.566496] RSP: 002b:00007ffe566c1fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 20.566510] RAX: ffffffffffffffda RBX: 000055e66806eec0 RCX: 00007f13d351ea3d
[ 20.566519] RDX: 0000000000000000 RSI: 00007f13d36d9441 RDI: 0000000000000010
[ 20.566527] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002
[ 20.566535] R10: 0000000000000010 R11: 0000000000000246 R12: 00007f13d36d9441
[ 20.566543] R13: 000055e6681108c0 R14: 000055e66805ba70 R15: 000055e66819a9c0
[ 20.566559] </TASK>
[ 20.566566] ---[ end trace 0000000000000000 ]---
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727185855.713318-1-suijingfeng@loongson.cn
|
|
Remove identical duplicate block of macro definitions in
drivers/gpu/drm/gma500/psb_drv.h.
Signed-off-by: Jorge Maidana <jorgem.linux@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230725173107.9593-1-jorgem.linux@gmail.com
|
|
Currently, NO_PREFETCH is passed implicitly through
drm_nouveau_gem_pushbuf_push::length and drm_nouveau_exec_push::va_len.
Since this is a direct representation of how the HW is programmed it
isn't really future proof for a uAPI. Hence, fix this up for the new
uAPI and split up the va_len field of struct drm_nouveau_exec_push,
such that we keep 32bit for va_len and 32bit for flags.
For drm_nouveau_gem_pushbuf_push::length at least provide
NOUVEAU_GEM_PUSHBUF_NO_PREFETCH to indicate the bit shift.
While at it, fix up nv50_dma_push() as well, such that the caller
doesn't need to encode the NO_PREFETCH flag into the length parameter.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823181746.3446-1-dakr@redhat.com
|
|
Transfer the region pointer of a uvma to the new uvma(s) on re-map to
prevent potential shader faults when the re-mapped uvma(s) are unmapped.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230820222920.2344-1-dakr@redhat.com
|
|
If a sched job depends on a dma-fence from a job from the same GPU
scheduler instance, but a different scheduler entity, the GPU scheduler
does only wait for the particular job to be scheduled, rather than for
the job to fully complete. This is due to the GPU scheduler assuming
that there is a scheduler instance per ring. However, the current
implementation, in order to avoid arbitrary amounts of kthreads, has a
single scheduler instance while scheduler entities represent rings.
As a workaround, set the DRM_SCHED_FENCE_DONT_PIPELINE for all
out-fences in order to force the scheduler to wait for full job
completion for dependent jobs from different entities and same scheduler
instance.
There is some work in progress [1] to address the issues of firmware
schedulers; once it is in-tree the scheduler topology in Nouveau should
be re-worked accordingly.
[1] https://lore.kernel.org/dri-devel/20230801205103.627779-1-matthew.brost@intel.com/
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collaboralcom>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811010632.2473-1-dakr@redhat.com
|
|
Since there's a lot of confusion around this, document both the rules
and the best practices around negotiating, allocating, importing, and
using buffers when crossing context/process/device/subsystem boundaries.
This ties up all of dma-buf, formats and modifiers, and their usage.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803154908.105124-4-daniels@collabora.com
|
|
Make it a little bit more clear what's going on and fix some formatting.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803154908.105124-3-daniels@collabora.com
|
|
It is not possible for platform_get_irq_byname() to return 0.
Use the return value from platform_get_irq_byname().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803040401.3067484-2-ruanjinjie@huawei.com
|
|
There's an obvious copy-paste error in the description of
output_bus_cfg. Fix it.
Fixes: f32df58acc68 ("drm/bridge: Add the necessary bits to support bus format negotiation")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817094808.1.I41b04c3a8305c9f1c17af886c327941c5136ca3b@changeid
|
|
The JDI LPM102A188A is a 2560x1800 IPS panel found in the Google Pixel C.
This driver is based on the downstream GPLv2 driver released by Google
written by Sean Paul [1], which was then adapted to the newer kernel APIs.
[1]: https://android.googlesource.com/kernel/tegra/+/refs/heads/android-tegra-dragon-3.18-oreo/drivers/gpu/drm/panel/panel-jdi-lpm102a188a.c
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807133307.27456-3-diogo.ivo@tecnico.ulisboa.pt
|
|
The LPM102A188A is a 10.2" 2560x1800 IPS panel found in
the Google Pixel C.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807133307.27456-2-diogo.ivo@tecnico.ulisboa.pt
|
|
Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when EDEFER is returned and useless error is printed.
Fixes error:
panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230812185239.378582-1-david@ixit.cz
|
|
Link is no longer functional and web.archive.org doesn't provide PDF
with detail information.
Some informations can be found from web.archive.org here:
https://web.archive.org/web/20170629205602/http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230812183404.374718-1-david@ixit.cz
|
|
Add support for the Mitsubishi AA084XE01 panel which is an 8.4 inch XGA
TFT-LCD module for industrial use.
Link: https://www.mouser.fr/datasheet/2/274/aa084xe01_e-364171.pdf
Signed-off-by: Thomas Weber <thomas.weber@corscience.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807123138.67443-2-miquel.raynal@bootlin.com
|
|
Add Mitsubishi AA084XE01 8.4" XGA TFT LCD panel compatible string.
Link: https://www.mouser.fr/datasheet/2/274/aa084xe01_e-364171.pdf
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807123138.67443-1-miquel.raynal@bootlin.com
|
|
Add the device link when panel bridge is attached and delete the link
when panel bridge is detached. The drm device is the consumer while
the panel device is the supplier. This makes sure that the drm device
suspends eariler and resumes later than the panel device, hence resolves
problems where the order is reversed, like the problematic case mentioned
in the below link.
Link: https://lore.kernel.org/lkml/CAPDyKFr0XjrU_udKoUKQ_q8RWaUkyqL+8fV-7s1CTMqi7u3-Rg@mail.gmail.com/T/
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807061115.3244501-1-victor.liu@nxp.com
|
|
Add missing call to crtc reset helper to properly vblank reset.
Also move vop2_crtc_reset and call vop2_crtc_destroy_state to simplify
and remove duplicated code.
Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621223311.2239547-6-jonas@kwiboo.se
|
|
It's possible for users to try to duplicate the CRTC state even when the
state doesn't exist. drm_atomic_helper_crtc_duplicate_state() (and other
users of __drm_atomic_helper_crtc_duplicate_state()) already guard this
with a WARN_ON() instead of crashing, so let's do that here too.
Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621223311.2239547-5-jonas@kwiboo.se
|
|
Allocation of crtc_state may fail in vop_crtc_reset, causing an invalid
pointer to be passed to __drm_atomic_helper_crtc_reset.
Fix this by adding a NULL check of crtc_state, similar to other drivers.
Fixes: 01e2eaf40c9d ("drm/rockchip: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621223311.2239547-4-jonas@kwiboo.se
|
|
vop_plane_destroy and vop_crtc_destroy are plain wrappers around
drm_plane_cleanup and drm_crtc_cleanup. Use them directly as plane and
crtc funcs to closer match VOP2 driver.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621223311.2239547-3-jonas@kwiboo.se
|
|
struct rockchip_crtc_state members such as output_type, output_bpc and
enable_afbc is always reset to zero in the atomic_duplicate_state crtc
funcs.
Fix this by using kmemdup on the subclass rockchip_crtc_state struct.
Fixes: 4e257d9eee23 ("drm/rockchip: get rid of rockchip_drm_crtc_mode_config")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621223311.2239547-2-jonas@kwiboo.se
|
|
There are two problems in lsdc_pixel_pll_setup()
1. If kzalloc() fails then call iounmap() to release the resources.
2. Both kzalloc and ioremap does not return error pointers on failure, so
using IS_ERR_OR_NULL() checks is a bit confusing and not very right,
fix this by changing those to NULL checks instead.
Fixes: f39db26c5428 ("drm: Add kms driver for loongson display controller")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720123950.543082-1-harshit.m.mogalapalli@oracle.com
|
|
atomic_get_input_bus_fmts is only implemented for LVDS decoders, resulting
that LVDS encoders only support bus format MEDIA_BUS_FMT_FIXED. This
results in warnings like:
mxsfb 21c8000.lcdif: Bridge does not provide bus format, assuming
MEDIA_BUS_FMT_RGB888_1X24.
Please fix bridge driver by handling atomic_get_input_bus_fmts.
Fix this by reusing lvds_codec_atomic_get_input_bus_fmts currently used
for LVDS decoders. Use RGB888_1X24 for LVDS encoders. This also allows
removing the dedicated struct drm_bridge_funcs for decoders.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230810063229.597533-1-alexander.stein@ew.tq-group.com
|
|
Exynos
Samsung DSIM used in older Exynos SoCs (like Exynos 4210, 4x12, 3250)
doesn't report empty level of packer header FIFO. In case of those SoCs,
use the old way of waiting for empty command tranfsfer FIFO, removed
recently by commit 14806c641582 ("drm: bridge: samsung-dsim: Drain command transfer FIFO before transfer").
Fixes: 14806c641582 ("drm: bridge: samsung-dsim: Drain command transfer FIFO before transfer")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809145641.3213210-1-m.szyprowski@samsung.com
|
|
Three DRM bridge drivers select GENERIC_PHY_MIPI_DPHY when GENERIC_PHY
might not be set. This causes Kconfig warnings and a build error.
WARNING: unmet direct dependencies detected for GENERIC_PHY_MIPI_DPHY
Depends on [n]: GENERIC_PHY [=n]
Selected by [y]:
- DRM_NWL_MIPI_DSI [=y] && DRM_BRIDGE [=y] && DRM [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y]
- DRM_SAMSUNG_DSIM [=y] && DRM [=y] && DRM_BRIDGE [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y]
(drm/bridge/cadence/Kconfig was found by inspection.)
aarch64-linux-ld: drivers/gpu/drm/bridge/samsung-dsim.o: in function `samsung_dsim_set_phy_ctrl':
drivers/gpu/drm/bridge/samsung-dsim.c:731: undefined reference to `phy_mipi_dphy_get_default_config_for_hsclk'
Prevent these warnings and build error by also selecting GENERIC_PHY
whenever selecting GENERIC_PHY_MIPI_DPHY.
Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework")
Fixes: 44cfc6233447 ("drm/bridge: Add NWL MIPI DSI host controller support")
Fixes: 171b3b1e0f8b ("drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Aleksandr Nogikh <nogikh@google.com>
Link: lore.kernel.org/r/20230803144227.2187749-1-nogikh@google.com
Cc: Adam Ford <aford173@gmail.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Robert Foss <rfoss@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Adam Ford <aford173@gmail.com>
Tested-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804030140.21395-1-rdunlap@infradead.org
|
|
The ULPS EXIT is initialized to 0xaf in downstream BSP as well as older
revisions of this patchset, in newer revisions of the DSIM patchset it
was left out and set to 0. Fix it.
Fixes: 4d562c70c4dc ("drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709134827.449185-1-marex@denx.de
|
|
Satisfy MMU dependency when testing TTM with KUnit. This fixes
compilation errors on platforms that don't select this option
by default.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308110133.f0lhFwMV-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202308111032.enU8IisR-lkp@intel.com/
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811113649.697886-1-karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Add comments regarding new DRM_IVPU_PARAM_CAPABILITIES param.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230810080707.3545883-1-stanislaw.gruszka@linux.intel.com
|
|
I think there are limit checks in place for most things but the
new uAPI wants to not have them.
Add a limit check and use the vmemdup_user helper instead.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230810185020.231135-1-airlied@gmail.com
|
|
RV1126 MIPI DSI supports V1.2 DPHY with 4 lanes and 1Gbps transfer
rate for lane.
Add support for it.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731110012.2913742-9-jagan@edgeble.ai
|
|
Document the MIPI DSI for Rockchip RV1126, which is
different from other SoCs variants.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731110012.2913742-8-jagan@edgeble.ai
|
|
RV1126 VOP_LITE supports the video output processing ofMIPI DSI,
RGB display interfaces with max output resolution of 1920x1080.
Add support for rv1126 vop.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731110012.2913742-7-jagan@edgeble.ai
|
|
The VOP on Rockchip's RV1126 SoC is different from other SoC's
VOP implementations, so add a separate compatible for it.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731110012.2913742-6-jagan@edgeble.ai
|
|
Commit cd3a8a596214 ("drm/ttm: remove ttm_bo_(un)lock_delayed_workqueue")
removed the implementations but not the declarations.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809135839.13216-1-yuehaibing@huawei.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
drm_exec_prepare_obj() and drm_exec_prepare_array() both reserve
dma-fence slots and hence a dma_resv_list without ever freeing it.
Make sure to call drm_gem_private_object_fini() for each GEM object
passed to drm_exec_prepare_obj()/drm_exec_prepare_array() throughout the
test to fix this up.
While at it, remove some trailing empty lines.
Fixes: 9710631cc8f3 ("drm: add drm_exec selftests v4")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809225034.8803-1-dakr@redhat.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
On the SoC host controller, the pixel clock can be:
* standard: data is launched on the rising edge
* inverted: data is launched on the falling edge
Some panels may need the inverted option to be used so let's support
this DRM flag.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609144843.851327-1-miquel.raynal@bootlin.com
|
|
Panfrost IRQ handler may stuck for a long time, for example this happens
when there is a bad HDMI connection and HDMI handler takes a long time to
finish processing, holding Panfrost. Make Panfrost's job timeout handler
to sync IRQ before checking fence signal status in order to prevent
spurious job timeouts due to a slow IRQ processing.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # MediaTek MT8192 and MT8195 Chromebooks
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807000444.14926-1-dmitry.osipenko@collabora.com
|
|
Not really a common use case, but let's make sure that we don't
accidentially break that somehow.
CC: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731123625.3766-2-christian.koenig@amd.com
|
|
GCC forbids to jump to labels in loop conditions and a new clang
check stumbled over this.
So instead using a local label inside the loop condition use an
unique label outside of it.
Fixes: 09593216bff1 ("drm: execution context for GEM buffers v7")
Link: https://gcc.gnu.org/onlinedocs/gcc/Statement-Exprs.html
Link: https://github.com/ClangBuiltLinux/linux/issues/1890
Link: https://github.com/llvm/llvm-project/commit/20219106060208f0c2f5d096eb3aed7b712f5067
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
CC: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731123625.3766-1-christian.koenig@amd.com
|
|
Add KUnit tests that exercise page allocation using page pools
and freeing pages, either by returning them to the pool or
freeing them. Add a basic test for ttm_pool cleanup. Introduce
helpers to create a dummy ttm_buffer_object.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/427ea373357d0b6cb376c9d7ebc33c930bf1d28a.1691487006.git.karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Test initialization and cleanup of the ttm_device struct, including
some error paths. Verify the creation of page pools if use_dma_alloc
param is true.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2abb0e53e7d56b0a24d0255f9075e2123b991278.1691487006.git.karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Add the initial version of unit tests for ttm_device struct, together
with helper functions.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d1cc45c8a0cf536b92a850e0025f6c555de0169.1691487006.git.karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Add support VPU 4 - new generation of VPU IP with various
hardware design improvements. From driver point of view, it differs
in register set, initialization process and MMU memory ranges.
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Co-developed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-7-stanislaw.gruszka@linux.intel.com
|
|
Add new dma range and change naming convention for virtual address
memory ranges managed by KMD.
New available ranges are named as follows:
* global range - global context accessible by FW
* aliased range - user context accessible by FW
* dma range - user context accessible by DMA
* shave range - user context accessible by shaves
* global shave range - global context accessible by shave nn
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-6-stanislaw.gruszka@linux.intel.com
|
|
Add DRM_IVPU_PARAM_CAPABILITIES parameters to get_param ioctl to query
driver capabilities. For now use it for identify metric streamer and
new dma memory range features. Currently upstream version of intel_vpu
does not have those, they will be added it the future.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-5-stanislaw.gruszka@linux.intel.com
|