| Age | Commit message (Collapse) | Author |
|---|
|
During chip registration we should neither check the return value of
gc->get_direction() nor hold the SRCU lock when calling it. The former
is because pin controllers may have pins set to alternate functions and
return errors from their get_direction() callbacks. That's alright - we
should default to the safe INPUT state and not bail-out. The latter is
not needed because we haven't registered the chip yet so there's nothing
to protect against dynamic removal. In fact: we currently hit a lockdep
splat. Revert to calling the gc->get_direction() callback directly and
*not* checking its value.
Fixes: 9d846b1aebbe ("gpiolib: check the return value of gpio_chip::get_direction()")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/81f890fc-6688-42f0-9756-567efc8bb97a@samsung.com/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250226-retval-fixes-v2-1-c8dc57182441@linaro.org
Tested-by: Gene C <arch@sapience.com>
Link: https://lore.kernel.org/r/20250311175631.83779-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.14
The bulk of this is driver specific fixes, mostly unremarkable. There's
also one core fix from Charles, fixing up confusion around the limiting
of maximum control values.
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fix from Tejun Heo:
"BPF schedulers could trigger a crash by passing in an invalid CPU to
the scx_bpf_select_cpu_dfl() helper.
Fix it by verifying input validity"
* tag 'sched_ext-for-6.14-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Validate prev_cpu in scx_bpf_select_cpu_dfl()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of driver specific fixes, an error handling fix for the Atmel
QuadSPI driver and a fix for a nasty synchronisation issue in the data
path for the Microchip driver which affects larger transfers.
There's also a MAINTAINERS update for the Samsung driver"
* tag 'spi-fix-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: microchip-core: prevent RX overflows when transmit size > FIFO size
MAINTAINERS: add tambarus as R for Samsung SPI
spi: atmel-quadspi: remove references to runtime PM on error path
|
|
Cong Wang says:
====================
net_sched: Prevent creation of classes with TC_H_ROOT
This patchset contains a bug fix and its TDC test case.
====================
Link: https://patch.msgid.link/20250306232355.93864-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Integrate the reproduer from Mingi to TDC.
All test results:
1..4
ok 1 0385 - Create DRR with default setting
ok 2 2375 - Delete DRR with handle
ok 3 3092 - Show DRR class
ok 4 4009 - Reject creation of DRR class with classid TC_H_ROOT
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306232355.93864-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination
condition when traversing up the qdisc tree to update parent backlog
counters. However, if a class is created with classid TC_H_ROOT, the
traversal terminates prematurely at this class instead of reaching the
actual root qdisc, causing parent statistics to be incorrectly maintained.
In case of DRR, this could lead to a crash as reported by Mingi Cho.
Prevent the creation of any Qdisc class with classid TC_H_ROOT
(0xFFFFFFFF) across all qdisc types, as suggested by Jamal.
Reported-by: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 066a3b5b2346 ("[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop")
Link: https://patch.msgid.link/20250306232355.93864-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PRT BOs may not have any backing store, so bo->tbo.resource will be
NULL. Check for that before dereferencing.
Fixes: 0cce5f285d9a ("drm/amdkfd: Check correct memory types for is_system variable")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e3fcd29b505cebed659311337ea03b7698767fc)
Cc: stable@vger.kernel.org # 6.12.x
|
|
[Why]
If reset is detected and kfd need to evict working queues, HWS moving queue will be failed.
Then remaining queues are not evicted and in active state.
After reset done, kfd uses HWS to termination remaining activated queues but HWS is resetted.
So remove queue will be failed again.
[How]
Keep removing all queues even if HWS returns failed.
It will not affect cpsch as it checks reset_domain->sem.
v2: If any queue failed, evict queue returns error.
v3: Declare err inside the if-block.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 42c854b8fb0cce512534aa2b7141948e80c6ebb0)
Cc: stable@vger.kernel.org
|
|
Pre-content hooks in page faults introduces potential deadlock of HSM
handler in userspace with filesystem freezing.
The requirement with pre-content event is that for every accessed file
range an event covering at least this range will be generated at least
once before the file data is accesses.
In preparation to disabling pre-content event hooks on page faults,
add pre-content hooks at mmap() variants for the entire mmaped range,
so HSM can fill content when user requests to map a portion of the file.
Note that exec() variant also calls vm_mmap_pgoff() internally to map
code sections, so pre-content hooks are also generated in this case.
Link: https://lore.kernel.org/linux-fsdevel/7ehxrhbvehlrjwvrduoxsao5k3x4aw275patsb3krkwuq573yv@o2hskrfawbnc/
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250312073852.2123409-2-amir73il@gmail.com
|
|
The Altera USB Blaster 3, available as both a cable and an on-board
solution, is primarily used for programming and debugging FPGAs.
It interfaces with host software such as Quartus Programmer,
System Console, SignalTap, and Nios Debugger. The device utilizes
either an FT2232 or FT4232 chip.
Enabling the support for various configurations of the on-board
USB Blaster 3 by including the appropriate VID/PID pairs,
allowing it to function as a serial device via ftdi_sio.
Note that this check-in does not include support for the
cable solution, as it does not support UART functionality.
The supported configurations are determined by the
hardware design and include:
1) PID 0x6022, FT2232, 1 JTAG port (Port A) + Port B as UART
2) PID 0x6025, FT4232, 1 JTAG port (Port A) + Port C as UART
3) PID 0x6026, FT4232, 1 JTAG port (Port A) + Port C, D as UART
4) PID 0x6029, FT4232, 1 JTAG port (Port B) + Port C as UART
5) PID 0x602a, FT4232, 1 JTAG port (Port B) + Port C, D as UART
6) PID 0x602c, FT4232, 1 JTAG port (Port A) + Port B as UART
7) PID 0x602d, FT4232, 1 JTAG port (Port A) + Port B, C as UART
8) PID 0x602e, FT4232, 1 JTAG port (Port A) + Port B, C, D as UART
These configurations allow for flexibility in how the USB Blaster 3 is
used, depending on the specific needs of the hardware design.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The custom suspend function causes a build warning when CONFIG_PM_SLEEP
is disabled:
sound/soc/codecs/cs42l43.c:2405:12: error: unused function 'cs42l43_codec_runtime_force_suspend' [-Werror,-Wunused-function]
Change SET_SYSTEM_SLEEP_PM_OPS() to the newer SYSTEM_SLEEP_PM_OPS(),
to avoid this.
Fixes: 164b7dd4546b ("ASoC: cs42l43: Add jack delay debounce after suspend")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250305172738.3437513-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit c780d01cf1a6 ("media: vb2: vb2_core_queue_init(): sanity check lock
and wait_prepare/finish") added a sanity check to ensure that if there are
no wait_prepare/finish callbacks set by the driver, then the vb2_queue lock
must be set, since otherwise the vb2 core cannot do correct locking.
The rtl2832_sdr.c triggered this warning: it turns out that while the
driver does set this lock, it sets it too late. So move it up to before
the vb2_queue_init() call.
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Closes: https://lore.kernel.org/linux-media/20241211042355.8479-1-user@am64/
Fixes: 8fcd2795d22a ("media: rtl2832_sdr: drop vb2_ops_wait_prepare/finish")
Cc: stable@vger.kernel.org
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add a fixup to enable the mute LED on HP Pavilion x360 Convertible
14-dy1xxx with ALC295 codec. The appropriate coefficient index and bits
were identified through a brute-force method, as detailed in
https://bbs.archlinux.org/viewtopic.php?pid=2079504#p2079504.
Signed-off-by: Navon John Lukose <navonjohnlukose@gmail.com>
Link: https://patch.msgid.link/20250307213319.35507-1-navonjohnlukose@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The get->num_services variable is an unsigned int which is controlled by
the user. The struct_size() function ensures that the size calculation
does not overflow an unsigned long, however, we are saving the result to
an int so the calculation can overflow.
Both "len" and "get->num_services" come from the user. This check is
just a sanity check to help the user and ensure they are using the API
correctly. An integer overflow here is not a big deal. This has no
security impact.
Save the result from struct_size() type size_t to fix this integer
overflow bug.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
These scripts fail if the kernel is tainted which leads to wrong test
failure reports in CI environments when an unrelated test triggers some
splat.
Check taint state at start of script and SKIP if its already dodgy.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
insert_tree()
Since commit b36e4523d4d5 ("netfilter: nf_conncount: fix garbage
collection confirm race"), `cpu` and `jiffies32` were introduced to
the struct nf_conncount_tuple.
The commit made nf_conncount_add() initialize `conn->cpu` and
`conn->jiffies32` when allocating the struct.
In contrast, count_tree() was not changed to initialize them.
By commit 34848d5c896e ("netfilter: nf_conncount: Split insert and
traversal"), count_tree() was split and the relevant allocation
code now resides in insert_tree().
Initialize `conn->cpu` and `conn->jiffies32` in insert_tree().
BUG: KMSAN: uninit-value in find_or_evict net/netfilter/nf_conncount.c:117 [inline]
BUG: KMSAN: uninit-value in __nf_conncount_add+0xd9c/0x2850 net/netfilter/nf_conncount.c:143
find_or_evict net/netfilter/nf_conncount.c:117 [inline]
__nf_conncount_add+0xd9c/0x2850 net/netfilter/nf_conncount.c:143
count_tree net/netfilter/nf_conncount.c:438 [inline]
nf_conncount_count+0x82f/0x1e80 net/netfilter/nf_conncount.c:521
connlimit_mt+0x7f6/0xbd0 net/netfilter/xt_connlimit.c:72
__nft_match_eval net/netfilter/nft_compat.c:403 [inline]
nft_match_eval+0x1a5/0x300 net/netfilter/nft_compat.c:433
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x426/0x2290 net/netfilter/nf_tables_core.c:288
nft_do_chain_ipv4+0x1a5/0x230 net/netfilter/nft_chain_filter.c:23
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook_slow_list+0x24d/0x860 net/netfilter/core.c:663
NF_HOOK_LIST include/linux/netfilter.h:350 [inline]
ip_sublist_rcv+0x17b7/0x17f0 net/ipv4/ip_input.c:633
ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:669
__netif_receive_skb_list_ptype net/core/dev.c:5936 [inline]
__netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5983
__netif_receive_skb_list net/core/dev.c:6035 [inline]
netif_receive_skb_list_internal+0x1085/0x1700 net/core/dev.c:6126
netif_receive_skb_list+0x5a/0x460 net/core/dev.c:6178
xdp_recv_frames net/bpf/test_run.c:280 [inline]
xdp_test_run_batch net/bpf/test_run.c:361 [inline]
bpf_test_run_xdp_live+0x2e86/0x3480 net/bpf/test_run.c:390
bpf_prog_test_run_xdp+0xf1d/0x1ae0 net/bpf/test_run.c:1316
bpf_prog_test_run+0x5e5/0xa30 kernel/bpf/syscall.c:4407
__sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5813
__do_sys_bpf kernel/bpf/syscall.c:5902 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5900 [inline]
__ia32_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5900
ia32_sys_call+0x394d/0x4180 arch/x86/include/generated/asm/syscalls_32.h:358
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0xb0/0x110 arch/x86/entry/common.c:387
do_fast_syscall_32+0x38/0x80 arch/x86/entry/common.c:412
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:450
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4121 [inline]
slab_alloc_node mm/slub.c:4164 [inline]
kmem_cache_alloc_noprof+0x915/0xe10 mm/slub.c:4171
insert_tree net/netfilter/nf_conncount.c:372 [inline]
count_tree net/netfilter/nf_conncount.c:450 [inline]
nf_conncount_count+0x1415/0x1e80 net/netfilter/nf_conncount.c:521
connlimit_mt+0x7f6/0xbd0 net/netfilter/xt_connlimit.c:72
__nft_match_eval net/netfilter/nft_compat.c:403 [inline]
nft_match_eval+0x1a5/0x300 net/netfilter/nft_compat.c:433
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x426/0x2290 net/netfilter/nf_tables_core.c:288
nft_do_chain_ipv4+0x1a5/0x230 net/netfilter/nft_chain_filter.c:23
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook_slow_list+0x24d/0x860 net/netfilter/core.c:663
NF_HOOK_LIST include/linux/netfilter.h:350 [inline]
ip_sublist_rcv+0x17b7/0x17f0 net/ipv4/ip_input.c:633
ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:669
__netif_receive_skb_list_ptype net/core/dev.c:5936 [inline]
__netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5983
__netif_receive_skb_list net/core/dev.c:6035 [inline]
netif_receive_skb_list_internal+0x1085/0x1700 net/core/dev.c:6126
netif_receive_skb_list+0x5a/0x460 net/core/dev.c:6178
xdp_recv_frames net/bpf/test_run.c:280 [inline]
xdp_test_run_batch net/bpf/test_run.c:361 [inline]
bpf_test_run_xdp_live+0x2e86/0x3480 net/bpf/test_run.c:390
bpf_prog_test_run_xdp+0xf1d/0x1ae0 net/bpf/test_run.c:1316
bpf_prog_test_run+0x5e5/0xa30 kernel/bpf/syscall.c:4407
__sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5813
__do_sys_bpf kernel/bpf/syscall.c:5902 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5900 [inline]
__ia32_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5900
ia32_sys_call+0x394d/0x4180 arch/x86/include/generated/asm/syscalls_32.h:358
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0xb0/0x110 arch/x86/entry/common.c:387
do_fast_syscall_32+0x38/0x80 arch/x86/entry/common.c:412
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:450
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
Reported-by: syzbot+83fed965338b573115f7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=83fed965338b573115f7
Fixes: b36e4523d4d5 ("netfilter: nf_conncount: fix garbage collection confirm race")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit 1f47ed294a2b ("block: cleanup and fix batch completion adding
conditions") modified the evaluation criteria for the third argument,
'ioerror', in the blk_mq_add_to_batch() function. Initially, the
function had checked if 'ioerror' equals zero. Following the commit, it
started checking for negative error values, with the presumption that
such values, for instance -EIO, would be passed in.
However, blk_mq_add_to_batch() callers do not pass negative error
values. Instead, they pass status codes defined in various ways:
- NVMe PCI and Apple drivers pass NVMe status code
- virtio_blk driver passes the virtblk request header status byte
- null_blk driver passes blk_status_t
These codes are either zero or positive, therefore the revised check
fails to function as intended. Specifically, with the NVMe PCI driver,
this modification led to the failure of the blktests test case nvme/039.
In this test scenario, errors are artificially injected to the NVMe
driver, resulting in positive NVMe status codes passed to
blk_mq_add_to_batch(), which unexpectedly processes the failed I/O in a
batch. Hence the failure.
To correct the ioerror check within blk_mq_add_to_batch(), make all
callers to uniformly pass the argument as boolean. Modify the callers to
check their specific status codes and pass the boolean value 'is_error'.
Also describe the arguments of blK_mq_add_to_batch as kerneldoc.
Fixes: 1f47ed294a2b ("block: cleanup and fix batch completion adding conditions")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20250311104359.1767728-3-shinichiro.kawasaki@wdc.com
[axboe: fold in documentation update]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes berg says:
====================
Few more fixes:
- cfg80211/mac80211
- stop possible runaway wiphy worker
- EHT should not use reserved MPDU size bits
- don't run worker for stopped interfaces
- fix SA Query processing with MLO
- fix lookup of assoc link BSS entries
- correct station flush on unauthorize
- iwlwifi:
- TSO fixes
- fix non-MSI-X platforms
- stop possible runaway restart worker
- rejigger maintainers so I'm not CC'ed on
everything
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If i2c_add_adapter() fails, the request_region() call in sis630_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/3d607601f2c38e896b10207963c6ab499ca5c307.1741033587.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
If i2c_add_adapter() fails, the request_region() call in ali15x3_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/9b2090cbcc02659f425188ea05f2e02745c4e67b.1741031878.git.christophe.jaillet@wanadoo.fr
|
|
If i2c_add_adapter() fails, the request_region() call in ali1535_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/0daf63d7a2ce74c02e2664ba805bbfadab7d25e5.1741031571.git.christophe.jaillet@wanadoo.fr
|
|
On the GTA04A5 writing a reset command to the gyroscope causes IRQ
storms because NACK IRQs are enabled and therefore triggered but not
acked.
Sending a reset command to the gyroscope by
i2cset 1 0x69 0x14 0xb6
with an additional debug print in the ISR (not the thread) itself
causes
[ 363.353515] i2c i2c-1: ioctl, cmd=0x720, arg=0xbe801b00
[ 363.359039] omap_i2c 48072000.i2c: addr: 0x0069, len: 2, flags: 0x0, stop: 1
[ 363.366180] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x1110)
[ 363.371673] omap_i2c 48072000.i2c: IRQ (ISR = 0x0010)
[ 363.376892] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.382263] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.387664] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
repeating till infinity
[...]
(0x2 = NACK, 0x100 = Bus free, which is not enabled)
Apparently no other IRQ bit gets set, so this stalls.
Do not ignore enabled interrupts and make sure they are acked.
If the NACK IRQ is not needed, it should simply not enabled, but
according to the above log, caring about it is necessary unless
the Bus free IRQ is enabled and handled. The assumption that is
will always come with a ARDY IRQ, which was the idea behind
ignoring it, proves wrong.
It is true for simple reads from an unused address.
To still avoid the i2cdetect trouble which is the reason for
commit c770657bd261 ("i2c: omap: Fix standard mode false ACK readings"),
avoid doing much about NACK in omap_i2c_xfer_data() which is used
by both IRQ mode and polling mode, so also the false detection fix
is extended to polling usage and IRQ storms are avoided.
By changing this, the hardirq handler is not needed anymore to filter
stuff.
The mentioned gyro reset now just causes a -ETIMEDOUT instead of
hanging the system.
Fixes: c770657bd261 ("i2c: omap: Fix standard mode false ACK readings").
CC: stable@kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250228140420.379498-1-andreas@kemnade.info
|
|
The MPDU length is only configured using the EHT capabilities element on
2.4 GHz. On 5/6 GHz it is configured using the VHT or HE capabilities
respectively.
Fixes: cf0079279727 ("wifi: mac80211: parse A-MSDU len from EHT capabilities")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250311121704.0634d31f0883.I28063e4d3ef7d296b7e8a1c303460346a30bf09c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 4e1746656839 ("rust: uapi: Add UAPI crate") did not update
rust-analyzer to include the new crate.
Add the missing definition to improve the developer experience.
Fixes: 4e1746656839 ("rust: uapi: Add UAPI crate")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250210-rust-analyzer-bindings-include-v2-2-23dff845edc3@gmail.com
[ Slightly reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Commit 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`")
specified OBJTREE for the bindings crate, and `source.include_dirs` for
the kernel crate, likely in an attempt to support out-of-source builds
for those crates where the generated files reside in `objtree` rather
than `srctree`. This was insufficient because both bits of configuration
are required for each crate; the result is that rust-analyzer is unable
to resolve generated files for either crate in an out-of-source build.
[ Originally we were not using `OBJTREE` in the `kernel` crate, but
we did pass the variable anyway, so conceptually it could have been
there since then.
Regarding `include_dirs`, it started in `kernel` before being in
mainline because we included the bindings directly there (i.e.
there was no `bindings` crate). However, when that crate got
created, we moved the `OBJTREE` there but not the `include_dirs`.
Nowadays, though, we happen to need the `include_dirs` also in
the `kernel` crate for `generated_arch_static_branch_asm.rs` which
was not there back then -- Tamir confirms it is indeed required
for that reason. - Miguel ]
Add the missing bits to improve the developer experience.
Fixes: 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250210-rust-analyzer-bindings-include-v2-1-23dff845edc3@gmail.com
[ Slightly reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Patches to fix Hyper-v framebuffer code (Michael Kelley and Saurabh
Sengar)
- Fix for Hyper-V output argument to hypercall that changes page
visibility (Michael Kelley)
- Fix for Hyper-V VTL mode (Naman Jain)
* tag 'hyperv-fixes-signed-20250311' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Don't release fb_mmio resource in vmbus_free_mmio()
x86/hyperv: Fix output argument to hypercall that changes page visibility
fbdev: hyperv_fb: Allow graceful removal of framebuffer
fbdev: hyperv_fb: Simplify hvfb_putmem
fbdev: hyperv_fb: Fix hang in kdump kernel when on Hyper-V Gen 2 VMs
drm/hyperv: Fix address space leak when Hyper-V DRM device is removed
fbdev: hyperv_fb: iounmap() the correct memory when removing a device
x86/hyperv/vtl: Stop kernel from probing VTL0 low memory
|
|
The macros crate has depended on std and proc_macro since its
introduction in commit 1fbde52bde73 ("rust: add `macros` crate"). These
dependencies were omitted from commit 8c4555ccc55c ("scripts: add
`generate_rust_analyzer.py`") resulting in missing go-to-definition and
autocomplete, and false-positive warnings emitted from rust-analyzer
such as:
[{
"resource": "/Users/tamird/src/linux/rust/macros/module.rs",
"owner": "_generated_diagnostic_collection_name_#1",
"code": {
"value": "non_snake_case",
"target": {
"$mid": 1,
"path": "/rustc/",
"scheme": "https",
"authority": "doc.rust-lang.org",
"query": "search=non_snake_case"
}
},
"severity": 4,
"message": "Variable `None` should have snake_case name, e.g. `none`",
"source": "rust-analyzer",
"startLineNumber": 123,
"startColumn": 17,
"endLineNumber": 123,
"endColumn": 21
}]
Add the missing dependencies to improve the developer experience.
[ Fiona had a different approach (thanks!) at:
https://lore.kernel.org/rust-for-linux/20241205115438.234221-1-me@kloenk.dev/
But Tamir and Fiona agreed to this one. - Miguel ]
Fixes: 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`")
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Diagnosed-by: Chayim Refael Friedman <chayimfr@gmail.com>
Link: https://github.com/rust-lang/rust-analyzer/issues/17759#issuecomment-2646328275
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250210-rust-analyzer-macros-core-dep-v3-1-45eb4836f218@gmail.com
[ Removed `return`. Changed tag name. Added Link. Slightly
reworded. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The kernel cannot currently self-parse BTF containing Rust debug
information. pahole uses the language of the CU to determine whether to
filter out debug information when generating the BTF. When LTO is
enabled, Rust code can cross CU boundaries, resulting in Rust debug
information in CUs labeled as C. This results in a system which cannot
parse its own BTF.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Cc: stable@vger.kernel.org
Fixes: c1177979af9c ("btf, scripts: Exclude Rust CUs with pahole")
Link: https://lore.kernel.org/r/20250108-rust-btf-lto-incompat-v1-1-60243ff6d820@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
for partial mmaps
Commit 255fc1703e42 ("drm/i915/gem: Calculate object page offset for partial memory mapping")
was the last patch of several patches fixing multiple partial mmaps.
But without a bump in I915_PARAM_MMAP_GTT_VERSION there is no clean
way for UMD to know if it can do multiple partial mmaps.
Fixes: 255fc1703e42 ("drm/i915/gem: Calculate object page offset for partial memory mapping")
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306210827.171147-1-jose.souza@intel.com
(cherry picked from commit bfef148f3680e6b9d28e7fca46d9520f80c5e50e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-fixes
Pull Samsung clk driver fixes from Krzysztof Kozlowski:
- Google GS101: Fix synchronous external abort during system suspend.
The driver access registers not available for OS, although issue
would not be visible in earlier kernels due to missing suspend
support.
- Tesla FSD: Correct PLL142XX lock time
* tag 'samsung-clk-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: update PLL locktime for PLL142XX used on FSD platform
clk: samsung: gs101: fix synchronous external abort in samsung_clk_save()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix the regmap settings for bcm281xx, this was missing the stride
- NULL check for the Nuvoton npcm8xx devm_kasprintf()
- Enable the Spacemit pin controller by default in the SoC config. The
SoC will not boot without it so this one is pretty much required
* tag 'pinctrl-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: spacemit: enable config option
pinctrl: nuvoton: npcm8xx: Add NULL check in npcm8xx_gpio_fw
pinctrl: bcm281xx: Fix incorrect regmap max_registers value
|
|
Add SAM client device nodes for the Surface Pro 11 (Intel).
Like with the Surface Pro 10 already, the node group
is compatible, so it can be reused.
Signed-off-by: Lukas Hetzenecker <lukas@hetzenecker.me>
Link: https://lore.kernel.org/r/20250310232803.23691-1-lukas@hetzenecker.me
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
There are a few problems in this code:
First, if amd_pmf_tee_init() fails then the function returns directly
instead of cleaning up. We cannot simply do a "goto error;" because
the amd_pmf_tee_init() cleanup calls tee_shm_free(dev->fw_shm_pool);
and amd_pmf_tee_deinit() calls it as well leading to a double free.
I have re-written this code to use an unwind ladder to free the
allocations.
Second, if amd_pmf_start_policy_engine() fails on every iteration though
the loop then the code calls amd_pmf_tee_deinit() twice which is also a
double free. Call amd_pmf_tee_deinit() inside the loop for each failed
iteration. Also on that path the error codes are not necessarily
negative kernel error codes. Set the error code to -EINVAL.
There is a very subtle third bug which is that if the call to
input_register_device() in amd_pmf_register_input_device() fails then
we call input_unregister_device() on an input device that wasn't
registered. This will lead to a reference counting underflow
because of the device_del(&dev->dev) in __input_unregister_device().
It's unlikely that anyone would ever hit this bug in real life.
Fixes: 376a8c2a1443 ("platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/232231fc-6a71-495e-971b-be2a76f6db4c@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
We were still using the trans after the unlock, leading to this bug in
the retry path:
00255 ------------[ cut here ]------------
00255 kernel BUG at fs/bcachefs/btree_iter.c:3348!
00255 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
00255 bcachefs (0ca38fe8-0a26-41f9-9b5d-6a27796c7803): /fiotest offset 86048768: no device to read from:
00255 u64s 8 type extent 4098:168192:U32_MAX len 128 ver 0: durability: 0 crc: c_size 128 size 128 offset 0 nonce 0 csum crc32c 0:8040a368 compress none ec: idx 83 block 1 ptr: 0:302:128 gen 0
00255 bcachefs (0ca38fe8-0a26-41f9-9b5d-6a27796c7803): /fiotest offset 85983232: no device to read from:
00255 u64s 8 type extent 4098:168064:U32_MAX len 128 ver 0: durability: 0 crc: c_size 128 size 128 offset 0 nonce 0 csum crc32c 0:43311336 compress none ec: idx 83 block 1 ptr: 0:302:0 gen 0
00255 Modules linked in:
00255 CPU: 5 UID: 0 PID: 304 Comm: kworker/u70:2 Not tainted 6.14.0-rc6-ktest-g526aae23d67d #16040
00255 Hardware name: linux,dummy-virt (DT)
00255 Workqueue: events_unbound bch2_rbio_retry
00255 pstate: 60001005 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00255 pc : __bch2_trans_get+0x100/0x378
00255 lr : __bch2_trans_get+0xa0/0x378
00255 sp : ffffff80c865b760
00255 x29: ffffff80c865b760 x28: 0000000000000000 x27: ffffff80d76ed880
00255 x26: 0000000000000018 x25: 0000000000000000 x24: ffffff80f4ec3760
00255 x23: ffffff80f4010140 x22: 0000000000000056 x21: ffffff80f4ec0000
00255 x20: ffffff80f4ec3788 x19: ffffff80d75f8000 x18: 00000000ffffffff
00255 x17: 2065707974203820 x16: 7334367520200a3a x15: 0000000000000008
00255 x14: 0000000000000001 x13: 0000000000000100 x12: 0000000000000006
00255 x11: ffffffc080b47a40 x10: 0000000000000000 x9 : ffffffc08038dea8
00255 x8 : ffffff80d75fc018 x7 : 0000000000000000 x6 : 0000000000003788
00255 x5 : 0000000000003760 x4 : ffffff80c922de80 x3 : ffffff80f18f0000
00255 x2 : ffffff80c922de80 x1 : 0000000000000130 x0 : 0000000000000006
00255 Call trace:
00255 __bch2_trans_get+0x100/0x378 (P)
00255 bch2_read_io_err+0x98/0x260
00255 bch2_read_endio+0xb8/0x2d0
00255 __bch2_read_extent+0xce8/0xfe0
00255 __bch2_read+0x2a8/0x978
00255 bch2_rbio_retry+0x188/0x318
00255 process_one_work+0x154/0x390
00255 worker_thread+0x20c/0x3b8
00255 kthread+0xf0/0x1b0
00255 ret_from_fork+0x10/0x20
00255 Code: 6b01001f 54ffff01 79408460 3617fec0 (d4210000)
00255 ---[ end trace 0000000000000000 ]---
00255 Kernel panic - not syncing: Oops - BUG: Fatal exception
00255 SMP: stopping secondary CPUs
00255 Kernel Offset: disabled
00255 CPU features: 0x000,00000070,00000010,8240500b
00255 Memory Limit: none
00255 ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception ]---
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When there is no inode source, all "from_inode" members in the structure
bhc_io_opts should be set false.
Fixes: 7a7c43a0c1ecf ("bcachefs: Add bch_io_opts fields for indicating whether the opts came from the inode")
Reported-by: syzbot+c17ad4b4367b72a853cb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c17ad4b4367b72a853cb
Signed-off-by: Roxana Nicolescu <nicolescu.roxana@protonmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add qlcnic_sriov_free_vlans() in qlcnic_sriov_alloc_vlans() if
any sriov_vlans fails to be allocated.
Add qlcnic_sriov_free_vlans() to free the memory allocated by
qlcnic_sriov_alloc_vlans() if "sriov->allowed_vlans" fails to
be allocated.
Fixes: 91b7282b613d ("qlcnic: Support VLAN id config.")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20250307094952.14874-1-haoxiang_li2024@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Free some resources in the error handling path of the probe, as already
done in the remove function.
Fixes: e3523e01869d ("ASoC: wm0010: Add initial wm0010 DSP driver")
Fixes: fd8b96574456 ("ASoC: wm0010: Clear IRQ as wake source and include missing header")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/5139ba1ab8c4c157ce04e56096a0f54a1683195c.1741549792.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Before the Commit 1f47ed294a2b ("block: cleanup and fix batch completion
adding conditions"), blk_mq_add_to_batch() did not add failed
passthrough requests to batch, and returned false. After the commit,
blk_mq_add_to_batch() always adds passthrough requests to batch
regardless of whether the request failed or not, and returns true. This
affected error logging feature in the NVME driver.
Before the commit, the call chain of failed passthrough request was as
follows:
nvme_handle_cqe()
blk_mq_add_to_batch() .. false is returned, then call nvme_pci_complete_rq()
nvme_pci_complete_rq()
nvme_complete_rq()
nvme_end_req()
nvme_log_err_passthru() .. error logging
__nvme_end_req() .. end of the rqeuest
After the commit, the call chain is as follows:
nvme_handle_cqe()
blk_mq_add_to_batch() .. true is returned, then set nvme_pci_complete_batch()
..
nvme_pci_complete_batch()
nvme_complete_batch()
nvme_complete_batch_req()
__nvme_end_req() .. end of the request, without error logging
To make the error logging feature work again for passthrough requests, move the
nvme_log_err_passthru() call from nvme_end_req() to __nvme_end_req().
While at it, move nvme_log_error() call for non-passthrough requests together
with nvme_log_err_passthru(). Even though the trigger commit does not affect
non-passthrough requests, move it together for code simplicity.
Fixes: 1f47ed294a2b ("block: cleanup and fix batch completion adding conditions")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250311104359.1767728-2-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When bset past end of btree node, we should not add sectors to
b->written, which will overflow b->written.
Reported-by: syzbot+3cb3d9e8c3f197754825@syzkaller.appspotmail.com
Tested-by: syzbot+3cb3d9e8c3f197754825@syzkaller.appspotmail.com
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since rtase_init_ring, which is called within rtase_sw_reset, adds ring
entries already present in the ring list back into the list, it causes
the ring list to form a cycle. This results in list_for_each_entry_safe
failing to find an endpoint during traversal, leading to an error.
Therefore, it is necessary to remove the previously added ring_list nodes
before calling rtase_init_ring.
Fixes: 079600489960 ("rtase: Implement net_device_ops")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306070510.18129-1-justinlai0215@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Hangbin Liu says:
====================
bonding: fix incorrect mac address setting
The mac address on backup slave should be convert from Solicited-Node
Multicast address, not from bonding unicast target address.
====================
Link: https://patch.msgid.link/20250306023923.38777-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The correct mac address for NS target 2001:db8::254 is 33:33:ff:00:02:54,
not 33:33:00:00:02:54. The same with client maddress.
Fixes: 86fb6173d11e ("selftests: bonding: add ns multicast group testing")
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306023923.38777-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When validation on the backup slave is enabled, we need to validate the
Neighbor Solicitation (NS) messages received on the backup slave. To
receive these messages, the correct destination MAC address must be added
to the slave. However, the target in bonding is a unicast address, which
we cannot use directly. Instead, we should first convert it to a
Solicited-Node Multicast Address and then derive the corresponding MAC
address.
Fix the incorrect MAC address setting on both slave_set_ns_maddr() and
slave_set_ns_maddrs(). Since the two function names are similar. Add
some description for the functions. Also only use one mac_addr variable
in slave_set_ns_maddr() to save some code and logic.
Fixes: 8eb36164d1a6 ("bonding: add ns target multicast address to slave device")
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306023923.38777-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ensure that the frag_list used for reassembly isn't shared with other
packets. This avoids incorrect reassembly when packets are cloned, and
prevents a memory leak due to circular references between fragments and
their skb_shared_info.
The upcoming MCTP-over-USB driver uses skb_clone which can trigger the
problem - other MCTP drivers don't share SKBs.
A kunit test is added to reproduce the issue.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Fixes: 4a992bbd3650 ("mctp: Implement message fragmentation & reassembly")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306-matt-mctp-usb-v1-1-085502b3dd28@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to and correctly identify the char array as "not a C
string" and thereby eliminate the warning.
This effectively reverts the change in 4e7487245abc ("vboxsf: fix building
with GCC 15"), to add the annotation that has other uses (i.e. warning
if the string is ever used with C string APIs).
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Brahmajit Das <brahmajit.xyz@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250310222530.work.374-kees@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Update the __flush_tlb_range_op macro not to modify its parameters as
these are unexepcted semantics. In practice, this fixes the call to
mmu_notifier_arch_invalidate_secondary_tlbs() in
__flush_tlb_range_nosync() to use the correct range instead of an empty
range with start=end. The empty range was (un)lucky as it results in
taking the invalidate-all path that doesn't cause correctness issues,
but can certainly result in suboptimal perf.
This has been broken since commit 6bbd42e2df8f ("mmu_notifiers: call
invalidate_range() when invalidating TLBs") when the call to the
notifiers was added to __flush_tlb_range(). It predates the addition of
the __flush_tlb_range_op() macro from commit 360839027a6e ("arm64: tlb:
Refactor the core flush algorithm of __flush_tlb_range") that made the
bug hard to spot.
Fixes: 6bbd42e2df8f ("mmu_notifiers: call invalidate_range() when invalidating TLBs")
Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Nicolin Chen <nicolinc@nvidia.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux.dev
Cc: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/r/20250304085127.2238030-1-pjaroszynski@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On the arm64 platform with 4K base page config, SECTION_SIZE_BITS is set
to 27, making one section 128M. The related page struct which vmemmap
points to is 2M then.
Commit c1cc1552616d ("arm64: MMU initialisation") optimizes the
vmemmap to populate at the PMD section level which was suitable
initially since hot plug granule is always one section(128M). However,
commit ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
introduced a 2M(SUBSECTION_SIZE) hot plug granule, which disrupted the
existing arm64 assumptions.
The first problem is that if start or end is not aligned to a section
boundary, such as when a subsection is hot added, populating the entire
section is wasteful.
The next problem is if we hotplug something that spans part of 128 MiB
section (subsections, let's call it memblock1), and then hotplug something
that spans another part of a 128 MiB section(subsections, let's call it
memblock2), and subsequently unplug memblock1, vmemmap_free() will clear
the entire PMD entry which also supports memblock2 even though memblock2
is still active.
Assuming hotplug/unplug sizes are guaranteed to be symmetric. Do the
fix similar to x86-64: populate to pages levels if start/end is not aligned
with section boundary.
Cc: stable@vger.kernel.org # v5.4+
Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250304072700.3405036-1-quic_zhenhuah@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A blocking notification chain uses a read-write semaphore to protect the
integrity of the chain. The semaphore is acquired for writing when
adding / removing notifiers to / from the chain and acquired for reading
when traversing the chain and informing notifiers about an event.
In case of the blocking switchdev notification chain, recursive
notifications are possible which leads to the semaphore being acquired
twice for reading and to lockdep warnings being generated [1].
Specifically, this can happen when the bridge driver processes a
SWITCHDEV_BRPORT_UNOFFLOADED event which causes it to emit notifications
about deferred events when calling switchdev_deferred_process().
Fix this by converting the notification chain to a raw notification
chain in a similar fashion to the netdev notification chain. Protect
the chain using the RTNL mutex by acquiring it when modifying the chain.
Events are always informed under the RTNL mutex, but add an assertion in
call_switchdev_blocking_notifiers() to make sure this is not violated in
the future.
Maintain the "blocking" prefix as events are always emitted from process
context and listeners are allowed to block.
[1]:
WARNING: possible recursive locking detected
6.14.0-rc4-custom-g079270089484 #1 Not tainted
--------------------------------------------
ip/52731 is trying to acquire lock:
ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0
but task is already holding lock:
ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock((switchdev_blocking_notif_chain).rwsem);
lock((switchdev_blocking_notif_chain).rwsem);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by ip/52731:
#0: ffffffff84f795b0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x727/0x1dc0
#1: ffffffff8731f628 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x790/0x1dc0
#2: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0
stack backtrace:
...
? __pfx_down_read+0x10/0x10
? __pfx_mark_lock+0x10/0x10
? __pfx_switchdev_port_attr_set_deferred+0x10/0x10
blocking_notifier_call_chain+0x58/0xa0
switchdev_port_attr_notify.constprop.0+0xb3/0x1b0
? __pfx_switchdev_port_attr_notify.constprop.0+0x10/0x10
? mark_held_locks+0x94/0xe0
? switchdev_deferred_process+0x11a/0x340
switchdev_port_attr_set_deferred+0x27/0xd0
switchdev_deferred_process+0x164/0x340
br_switchdev_port_unoffload+0xc8/0x100 [bridge]
br_switchdev_blocking_event+0x29f/0x580 [bridge]
notifier_call_chain+0xa2/0x440
blocking_notifier_call_chain+0x6e/0xa0
switchdev_bridge_port_unoffload+0xde/0x1a0
...
Fixes: f7a70d650b0b6 ("net: bridge: switchdev: Ensure deferred event delivery on unoffload")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250305121509.631207-1-amcohen@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
