| Age | Commit message (Collapse) | Author |
|---|
|
Firmware version query is supported on the PFs. Due to this
following kernel warning log is observed:
[ 188.590344] mlx5_core 0000:08:00.2: mlx5_fw_version_query:816:(pid 1453): fw query isn't supported by the FW
Fix it by restricting the query and devlink info to the PF.
Fixes: 8338d9378895 ("net/mlx5: Added devlink info callback")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Link: https://patch.msgid.link/20250306212529.429329-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently on stable trees we have support for netmem/devmem RX but not
TX. It is not safe to forward/redirect an RX unreadable netmem packet
into the device's TX path, as the device may call dma-mapping APIs on
dma addrs that should not be passed to it.
Fix this by preventing the xmit of unreadable skbs.
Tested by configuring tc redirect:
sudo tc qdisc add dev eth1 ingress
sudo tc filter add dev eth1 ingress protocol ip prio 1 flower ip_proto \
tcp src_ip 192.168.1.12 action mirred egress redirect dev eth1
Before, I see unreadable skbs in the driver's TX path passed to dma
mapping APIs.
After, I don't see unreadable skbs in the driver's TX path passed to dma
mapping APIs.
Fixes: 65249feb6b3d ("net: add support for skbs with unreadable frags")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250306215520.1415465-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btusb: Configure altsetting for HCI_USER_CHANNEL
- hci_event: Fix enabling passive scanning
- revert: "hci_core: Fix sleeping function called from invalid context"
- SCO: fix sco_conn refcounting on sco_conn_ready
* tag 'for-net-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Revert "Bluetooth: hci_core: Fix sleeping function called from invalid context"
Bluetooth: hci_event: Fix enabling passive scanning
Bluetooth: SCO: fix sco_conn refcounting on sco_conn_ready
Bluetooth: btusb: Configure altsetting for HCI_USER_CHANNEL
====================
Link: https://patch.msgid.link/20250307181854.99433-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 4d94f05558271654670d18c26c912da0c1c15549 which has
problems (see [1]) and is no longer needed since 581dd2dc168f
("Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating")
has reworked the code where the original bug has been found.
[1] Link: https://lore.kernel.org/linux-bluetooth/877c55ci1r.wl-tiwai@suse.de/T/#t
Fixes: 4d94f0555827 ("Bluetooth: hci_core: Fix sleeping function called from invalid context")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Passive scanning shall only be enabled when disconnecting LE links,
otherwise it may start result in triggering scanning when e.g. an ISO
link disconnects:
> HCI Event: LE Meta Event (0x3e) plen 29
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 257
CIG Synchronization Delay: 0 us (0x000000)
CIS Synchronization Delay: 0 us (0x000000)
Central to Peripheral Latency: 10000 us (0x002710)
Peripheral to Central Latency: 10000 us (0x002710)
Central to Peripheral PHY: LE 2M (0x02)
Peripheral to Central PHY: LE 2M (0x02)
Number of Subevents: 1
Central to Peripheral Burst Number: 1
Peripheral to Central Burst Number: 1
Central to Peripheral Flush Timeout: 2
Peripheral to Central Flush Timeout: 2
Central to Peripheral MTU: 320
Peripheral to Central MTU: 160
ISO Interval: 10.00 msec (0x0008)
...
> HCI Event: Disconnect Complete (0x05) plen 4
Status: Success (0x00)
Handle: 257
Reason: Remote User Terminated Connection (0x13)
< HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
Fixes: 9fcb18ef3acb ("Bluetooth: Introduce LE auto connect options")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
sco_conn refcount shall not be incremented a second time if the sk
already owns the refcount, so hold only when adding new chan.
Add sco_conn_hold() for clarity, as refcnt is never zero here due to the
sco_conn_add().
Fixes SCO socket shutdown not actually closing the SCO connection.
Fixes: ed9588554943 ("Bluetooth: SCO: remove the redundant sco_conn_put")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Automatically configure the altsetting for HCI_USER_CHANNEL when a SCO
is connected.
The motivation is to enable the HCI_USER_CHANNEL user to send out SCO
data through USB Bluetooth chips, which is mainly used for bidirectional
audio transfer (voice call). This was not capable because:
- Per Bluetooth Core Spec v5, Vol 4, Part B, 2.1, the corresponding
alternate setting should be set based on the air mode in order to
transfer SCO data, but
- The Linux Bluetooth HCI_USER_CHANNEL exposes the Bluetooth Host
Controller Interface to the user space, which is something above the
USB layer. The user space is not able to configure the USB alt while
keeping the channel open.
This patch intercepts the HCI_EV_SYNC_CONN_COMPLETE packets in btusb,
extracts the air mode, and configures the alt setting in btusb.
This patch is tested on ChromeOS devices. The USB Bluetooth models
(CVSD, TRANS alt3 and alt6) could work without a customized kernel.
Fixes: b16b327edb4d ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix racy non-atomic read-then-increment operation with
PREEMPT_RT in nft_ct, from Sebastian Andrzej Siewior.
2) GC is not skipped when jiffies wrap around in nf_conncount,
from Nicklas Bo Jensen.
3) flush_work() on nf_tables_destroy_work waits for the last queued
instance, this could be an instance that is different from the one
that we must wait for, then make destruction work queue.
* tag 'nf-25-03-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: make destruction work queue pernet
netfilter: nf_conncount: garbage collection is not skipped when jiffies wrap around
netfilter: nft_ct: Use __refcount_inc() for per-CPU nft_ct_pcpu_template.
====================
Link: https://patch.msgid.link/20250306153446.46712-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If kzalloc in gred_init returns a NULL pointer, the code follows the
error handling path, invoking gred_destroy. This, in turn, calls
gred_offload, where memset could receive a NULL pointer as input,
potentially leading to a kernel crash.
When table->opt is NULL in gred_init(), gred_change_table_def()
is not called yet, so it is not necessary to call ->ndo_setup_tc()
in gred_offload().
Signed-off-by: Jun Yang <juny24602@gmail.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Fixes: f25c0515c521 ("net: sched: gred: dynamically allocate tc_gred_qopt_offload")
Link: https://patch.msgid.link/20250305154410.3505642-1-juny24602@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-03-05 (ice)
This series contains updates to ice driver.
Larysa removes modification of destination override that caused LLDP
packets to be blocked.
Grzegorz fixes a memory leak in aRFS.
Marcin resolves an issue with operation of switchdev and LAG.
Przemek adjusts order of calls for registering devlink in relation to
health reporters.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: register devlink prior to creating health reporters
ice: Fix switchdev slow-path in LAG
ice: fix memory leak in aRFS after reset
ice: do not configure destination override for switchdev
====================
Link: https://patch.msgid.link/20250305213549.1514274-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and wireless.
Current release - new code bugs:
- wifi: nl80211: disable multi-link reconfiguration
Previous releases - regressions:
- gso: fix ownership in __udp_gso_segment
- wifi: iwlwifi:
- fix A-MSDU TSO preparation
- free pages allocated when failing to build A-MSDU
- ipv6: fix dst ref loop in ila lwtunnel
- mptcp: fix 'scheduling while atomic' in
mptcp_pm_nl_append_new_local_addr
- bluetooth: add check for mgmt_alloc_skb() in
mgmt_device_connected()
- ethtool: allow NULL nlattrs when getting a phy_device
- eth: be2net: fix sleeping while atomic bugs in
be_ndo_bridge_getlink
Previous releases - always broken:
- core: support TCP GSO case for a few missing flags
- wifi: mac80211:
- fix vendor-specific inheritance
- cleanup sta TXQs on flush
- llc: do not use skb_get() before dev_queue_xmit()
- eth: ipa: nable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX}
for v4.7"
* tag 'net-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: ipv6: fix missing dst ref drop in ila lwtunnel
net: ipv6: fix dst ref loop in ila lwtunnel
mctp i3c: handle NULL header address
net: dsa: mt7530: Fix traffic flooding for MMIO devices
net-timestamp: support TCP GSO case for a few missing flags
vlan: enforce underlying device type
mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr
net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device
ppp: Fix KMSAN uninit-value warning with bpf
net: ipa: Enable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX} for v4.7
net: ipa: Fix QSB data for v4.7
net: ipa: Fix v4.7 resource group names
net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error
wifi: nl80211: disable multi-link reconfiguration
net: dsa: rtl8366rb: don't prompt users for LED control
be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink
llc: do not use skb_get() before dev_queue_xmit()
wifi: cfg80211: regulatory: improve invalid hints checking
caif_virtio: fix wrong pointer check in cfv_probe()
net: gso: fix ownership in __udp_gso_segment
...
|
|
Pull smb fixes from Steve French:
"Five SMB server fixes, two related client fixes, and minor MAINTAINERS
update:
- Two SMB3 lock fixes fixes (including use after free and bug on fix)
- Fix to race condition that can happen in processing IPC responses
- Four ACL related fixes: one related to endianness of num_aces, and
two related fixes to the checks for num_aces (for both client and
server), and one fixing missing check for num_subauths which can
cause memory corruption
- And minor update to email addresses in MAINTAINERS file"
* tag 'v6.14-rc5-smb3-fixes' of git://git.samba.org/ksmbd:
cifs: fix incorrect validation for num_aces field of smb_acl
ksmbd: fix incorrect validation for num_aces field of smb_acl
smb: common: change the data type of num_aces to le16
ksmbd: fix bug on trap in smb2_lock
ksmbd: fix use-after-free in smb2_lock
ksmbd: fix type confusion via race condition when using ipc_msg_send_request
ksmbd: fix out-of-bounds in parse_sec_desc()
MAINTAINERS: update email address in cifs and ksmbd entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Optimize new cluster allocation by correctly find empty entry slot
- Add a check to prevent excessive bitmap clearing due to invalid
data size of file/dir entry
- Fix incorrect error return for zero-byte writes
* tag 'exfat-for-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: add a check for invalid data size
exfat: short-circuit zero-byte writes in exfat_file_write_iter
exfat: fix soft lockup in exfat_clear_bitmap
exfat: fix just enough dentries but allocate a new cluster to dir
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix spelling mistakes in idmappings.rst
- Fix RCU warnings in override_creds()/revert_creds()
- Create new pid namespaces with default limit now that pid_max is
namespaced
* tag 'vfs-6.14-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pid: Do not set pid_max in new pid namespaces
doc: correcting two prefix errors in idmappings.rst
cred: Fix RCU warnings in override/revert_creds
|
|
This was another case that Rasmus pointed out where the direct access to
the pipe head and tail pointers broke on 32-bit configurations due to
the type changes.
As with the pipe FIONREAD case, fix it by using the appropriate helper
functions that deal with the right pipe index sizing.
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Link: https://lore.kernel.org/all/878qpi5wz4.fsf@prevas.dk/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")Cc: Oleg >
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rasmus points out that we do indeed have other cases of breakage from
the type changes that were introduced on 32-bit targets in order to read
the pipe head and tail values atomically (commit 3d252160b818: "fs/pipe:
Read pipe->{head,tail} atomically outside pipe->mutex").
Fix it up by using the proper helper functions that now deal with the
pipe buffer index types properly. This makes the code simpler and more
obvious.
The compiler does the CSE and loop hoisting of the pipe ring size
masking that we used to do manually, so open-coding this was never a
good idea.
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Link: https://lore.kernel.org/all/87cyeu5zgk.fsf@prevas.dk/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
That's what 'pipe_full()' does, so it's more consistent. But more
importantly it gets the type limits right when the pipe head and tail
are no longer necessarily 'unsigned int'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The call to flush_work before tearing down a table from the netlink
notifier was supposed to make sure that all earlier updates (e.g. rule
add) that might reference that table have been processed.
Unfortunately, flush_work() waits for the last queued instance.
This could be an instance that is different from the one that we must
wait for.
This is because transactions are protected with a pernet mutex, but the
work item is global, so holding the transaction mutex doesn't prevent
another netns from queueing more work.
Make the work item pernet so that flush_work() will wait for all
transactions queued from this netns.
A welcome side effect is that we no longer need to wait for transaction
objects from foreign netns.
The gc work queue is still global. This seems to be ok because nft_set
structures are reference counted and each container structure owns a
reference on the net namespace.
The destroy_list is still protected by a global spinlock rather than
pernet one but the hold time is very short anyway.
v2: call cancel_work_sync before reaping the remaining tables (Pablo).
Fixes: 9f6958ba2e90 ("netfilter: nf_tables: unconditionally flush pending work before notifier")
Reported-by: syzbot+5d8c5789c8cb076b2c25@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add missing skb_dst_drop() to drop reference to the old dst before
adding the new dst to the skb.
Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250305081655.19032-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch follows commit 92191dd10730 ("net: ipv6: fix dst ref loops in
rpl, seg6 and ioam6 lwtunnels") and, on a second thought, the same patch
is also needed for ila (even though the config that triggered the issue
was pathological, but still, we don't want that to happen).
Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250304181039.35951-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
daddr can be NULL if there is no neighbour table entry present,
in that case the tx packet should be dropped.
saddr will usually be set by MCTP core, but check for NULL in case a
packet is transmitted by a different protocol.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver")
Link: https://patch.msgid.link/20250304-mctp-i3c-null-v1-1-4416bbd56540@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It is already difficult for users to troubleshoot which of multiple pid
limits restricts their workload. The per-(hierarchical-)NS pid_max would
contribute to the confusion.
Also, the implementation copies the limit upon creation from
parent, this pattern showed cumbersome with some attributes in legacy
cgroup controllers -- it's subject to race condition between parent's
limit modification and children creation and once copied it must be
changed in the descendant.
Let's do what other places do (ucounts or cgroup limits) -- create new
pid namespaces without any limit at all. The global limit (actually any
ancestor's limit) is still effectively in place, we avoid the
set/unshare race and bumps of global (ancestral) limit have the desired
effect on pid namespace that do not care.
Link: https://lore.kernel.org/r/20240408145819.8787-1-mkoutny@suse.com/
Link: https://lore.kernel.org/r/20250221170249.890014-1-mkoutny@suse.com/
Fixes: 7863dcc72d0f4 ("pid: allow pid_max to be set per pid namespace")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20250305145849.55491-1-mkoutny@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On MMIO devices (e.g. MT7988 or EN7581) unicast traffic received on lanX
port is flooded on all other user ports if the DSA switch is configured
without VLAN support since PORT_MATRIX in PCR regs contains all user
ports. Similar to MDIO devices (e.g. MT7530 and MT7531) fix the issue
defining default VLAN-ID 0 for MT7530 MMIO devices.
Fixes: 110c18bfed414 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20250304-mt7988-flooding-fix-v1-1-905523ae83e9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
around
nf_conncount is supposed to skip garbage collection if it has already
run garbage collection in the same jiffy. Unfortunately, this is broken
when jiffies wrap around which this patch fixes.
The problem is that last_gc in the nf_conncount_list struct is an u32,
but jiffies is an unsigned long which is 8 bytes on my systems. When
those two are compared it only works until last_gc wraps around.
See bug report: https://bugzilla.netfilter.org/show_bug.cgi?id=1778
for more details.
Fixes: d265929930e2 ("netfilter: nf_conncount: reduce unnecessary GC")
Signed-off-by: Nicklas Bo Jensen <njensen@akamai.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- power management fix in intel-thc-hid (Even Xu)
- nintendo gencon mapping fix (Ryan McClelland)
- fix for UAF on device diconnect path in hid-steam (Vicki Pfau)
- two fixes for UAF on device disconnect path in intel-ish-hid (Zhang
Lixu)
- fix for potential NULL dereference in hid-appleir (Daniil Dulov)
- few other small cosmetic fixes (e.g. typos)
* tag 'hid-for-linus-2025030501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Intel-thc-hid: Intel-quickspi: Correct device state after S4
HID: intel-thc-hid: Fix spelling mistake "intput" -> "input"
HID: hid-steam: Fix use-after-free when detaching device
HID: debug: Fix spelling mistake "Messanger" -> "Messenger"
HID: appleir: Fix potential NULL dereference at raw event handle
HID: apple: disable Fn key handling on the Omoton KB066
HID: i2c-hid: improve i2c_hid_get_report error message
HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove()
HID: intel-ish-hid: Fix use-after-free issue in hid_ishtp_cl_remove()
HID: google: fix unused variable warning under !CONFIG_ACPI
HID: nintendo: fix gencon button events map
HID: corsair-void: Update power supply values with a unified work handler
|
|
While looking for incorrect users of the pipe head/tail fields (see
commit c27c66afc449: "fs/pipe: Fix pipe_occupancy() with 16-bit
indexes"), I found a bug in pipe_discard_from() that looked entirely
broken.
However, the fix is trivial: this buggy function isn't actually called
by anything, so let's just remove it ASAP.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add htmldoc annotation for the newly introduced "head_tail" member
describing it to be a union of the pipe_inode_info's @head and @tail
members.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20250305204609.5e64768e@canb.auug.org.au/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The pipe_occupancy() logic implicitly relied on the natural unsigned
modulo arithmetic in C, but that doesn't work for the new 'pipe_index_t'
case, since any arithmetic will be done in 'int' (and here we had also
made it 'unsigned int' due to the function call boundary).
So make the modulo arithmetic explicit by casting the result to the
proper type.
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/all/CAHk-=wjyHsGLx=rxg6PKYBNkPYAejgo7=CbyL3=HGLZLsAaJFQ@mail.gmail.com/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ice_health_init() was introduced in the commit 2a82874a3b7b ("ice: add
Tx hang devlink health reporter"). The call to it should have been put
after ice_devlink_register(). It went unnoticed until next reporter by
Konrad, which receives events from FW. FW is reporting all events, also
from prior driver load, and thus it is not unlikely to have something
at the very beginning. And that results in a splat:
[ 24.455950] ? devlink_recover_notify.constprop.0+0x198/0x1b0
[ 24.455973] devlink_health_report+0x5d/0x2a0
[ 24.455976] ? __pfx_ice_health_status_lookup_compare+0x10/0x10 [ice]
[ 24.456044] ice_process_health_status_event+0x1b7/0x200 [ice]
Do the analogous thing for deinit patch.
Fixes: 85d6164ec56d ("ice: add fw and port health reporters")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Konrad Knitter <konrad.knitter@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Ever since removing switchdev control VSI and using PF for port
representor Tx/Rx, switchdev slow-path has been working improperly after
failover in SR-IOV LAG. LAG assumes that the first uplink to be added to
the aggregate will own VFs and have switchdev configured. After
failing-over to the other uplink, representors are still configured to
Tx through the uplink they are set up on, which fails because that
uplink is now down.
On failover, update all PRs on primary uplink to use the currently
active uplink for Tx. Call netif_keep_dst(), as the secondary uplink
might not be in switchdev mode. Also make sure to call
ice_eswitch_set_target_vsi() if uplink is in LAG.
On the Rx path, representors are already working properly, because
default Tx from VFs is set to PF owning the eswitch. After failover the
same PF is receiving traffic from VFs, even though link is down.
Fixes: defd52455aee ("ice: do Tx through PF netdev in slow-path")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix aRFS (accelerated Receive Flow Steering) structures memory leak by
adding a checker to verify if aRFS memory is already allocated while
configuring VSI. aRFS objects are allocated in two cases:
- as part of VSI initialization (at probe), and
- as part of reset handling
However, VSI reconfiguration executed during reset involves memory
allocation one more time, without prior releasing already allocated
resources. This led to the memory leak with the following signature:
[root@os-delivery ~]# cat /sys/kernel/debug/kmemleak
unreferenced object 0xff3c1ca7252e6000 (size 8192):
comm "kworker/0:0", pid 8, jiffies 4296833052
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
[<ffffffff991ec485>] __kmalloc_cache_noprof+0x275/0x340
[<ffffffffc0a6e06a>] ice_init_arfs+0x3a/0xe0 [ice]
[<ffffffffc09f1027>] ice_vsi_cfg_def+0x607/0x850 [ice]
[<ffffffffc09f244b>] ice_vsi_setup+0x5b/0x130 [ice]
[<ffffffffc09c2131>] ice_init+0x1c1/0x460 [ice]
[<ffffffffc09c64af>] ice_probe+0x2af/0x520 [ice]
[<ffffffff994fbcd3>] local_pci_probe+0x43/0xa0
[<ffffffff98f07103>] work_for_cpu_fn+0x13/0x20
[<ffffffff98f0b6d9>] process_one_work+0x179/0x390
[<ffffffff98f0c1e9>] worker_thread+0x239/0x340
[<ffffffff98f14abc>] kthread+0xcc/0x100
[<ffffffff98e45a6d>] ret_from_fork+0x2d/0x50
[<ffffffff98e083ba>] ret_from_fork_asm+0x1a/0x30
...
Fixes: 28bf26724fdb ("ice: Implement aRFS")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After switchdev is enabled and disabled later, LLDP packets sending stops,
despite working perfectly fine before and during switchdev state.
To reproduce (creating/destroying VF is what triggers the reconfiguration):
devlink dev eswitch set pci/<address> mode switchdev
echo '2' > /sys/class/net/<ifname>/device/sriov_numvfs
echo '0' > /sys/class/net/<ifname>/device/sriov_numvfs
This happens because LLDP relies on the destination override functionality.
It needs to 1) set a flag in the descriptor, 2) set the VSI permission to
make it valid. The permissions are set when the PF VSI is first configured,
but switchdev then enables it for the uplink VSI (which is always the PF)
once more when configured and disables when deconfigured, which leads to
software-generated LLDP packets being blocked.
Do not modify the destination override permissions when configuring
switchdev, as the enabled state is the default configuration that is never
modified.
Fixes: 1a1c40df2e80 ("ice: set and release switchdev environment")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When I read through the TSO codes, I found out that we probably
miss initializing the tx_flags of last seg when TSO is turned
off, which means at the following points no more timestamp
(for this last one) will be generated. There are three flags
to be handled in this patch:
1. SKBTX_HW_TSTAMP
2. SKBTX_BPF
3. SKBTX_SCHED_TSTAMP
Note that SKBTX_BPF[1] was added in 6.14.0-rc2 by commit
6b98ec7e882af ("bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback")
and only belongs to net-next branch material for now. The common
issue of the above three flags can be fixed by this single patch.
This patch initializes the tx_flags to SKBTX_ANY_TSTAMP like what
the UDP GSO does to make the newly segmented last skb inherit the
tx_flags so that requested timestamp will be generated in each
certain layer, or else that last one has zero value of tx_flags
which leads to no timestamp at all.
Fixes: 4ed2d765dfacc ("net-timestamp: TCP timestamping")
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a check for invalid data size to avoid corrupted filesystem
from being further corrupted.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
When generic_write_checks() returns zero, it means that
iov_iter_count() is zero, and there is no work to do.
Simply return success like all other filesystems do, rather than
proceeding down the write path, which today yields an -EFAULT in
generic_perform_write() via the
(fault_in_iov_iter_readable(i, bytes) == bytes) check when bytes
== 0.
Fixes: 11a347fb6cef ("exfat: change to get file size from DataLength")
Reported-by: Noah <kernel-org-10@maxgrass.eu>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
bitmap clear loop will take long time in __exfat_free_cluster()
if data size of file/dir enty is invalid.
If cluster bit in bitmap is already clear, stop clearing bitmap go to
out of loop.
Fixes: 31023864e67a ("exfat: add fat entry operations")
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>, Jiaji Qin <jjtan24@m.fudan.edu.cn>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
This commit fixes the condition for allocating cluster to parent
directory to avoid allocating new cluster to parent directory when
there are just enough empty directory entries at the end of the
parent directory.
Fixes: af02c72d0b62 ("exfat: convert exfat_find_empty_entry() to use dentry cache")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Add the 'k' prefix to id 21000. And id `u1000` in the third
idmapping should be mapped to `k31000`, not `u31000`.
Signed-off-by: Aiden Ma <jiaheng.ma@foxmail.com>
Link: https://lore.kernel.org/r/tencent_4E7B1F143E8051530C21FCADF4E014DCBB06@qq.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD microcode loading fixes from Borislav Petkov:
- Load only sha256-signed microcode patch blobs
- Other good cleanups
* tag 'x86_microcode_for_v6.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Load only SHA256-checksummed patches
x86/microcode/AMD: Add get_patch_level()
x86/microcode/AMD: Get rid of the _load_microcode_amd() forward declaration
x86/microcode/AMD: Merge early_apply_microcode() into its single callsite
x86/microcode/AMD: Remove unused save_microcode_in_initrd_amd() declarations
x86/microcode/AMD: Remove ugly linebreak in __verify_patch_section() signature
|
|
Currently, VLAN devices can be created on top of non-ethernet devices.
Besides the fact that it doesn't make much sense, this also causes a
bug which leaks the address of a kernel function to usermode.
When creating a VLAN device, we initialize GARP (garp_init_applicant)
and MRP (mrp_init_applicant) for the underlying device.
As part of the initialization process, we add the multicast address of
each applicant to the underlying device, by calling dev_mc_add.
__dev_mc_add uses dev->addr_len to determine the length of the new
multicast address.
This causes an out-of-bounds read if dev->addr_len is greater than 6,
since the multicast addresses provided by GARP and MRP are only 6
bytes long.
This behaviour can be reproduced using the following commands:
ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo
ip l set up dev gretest
ip link add link gretest name vlantest type vlan id 100
Then, the following command will display the address of garp_pdu_rcv:
ip maddr show | grep 01:80:c2:00:00:21
Fix the bug by enforcing the type of the underlying device during VLAN
device initialization.
Fixes: 22bedad3ce11 ("net: convert multicast list to list_head")
Reported-by: syzbot+91161fe81857b396c8a0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000ca9a81061a01ec20@google.com/
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250303155619.8918-1-oscmaes92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If multiple connection requests attempt to create an implicit mptcp
endpoint in parallel, more than one caller may end up in
mptcp_pm_nl_append_new_local_addr because none found the address in
local_addr_list during their call to mptcp_pm_nl_get_local_id. In this
case, the concurrent new_local_addr calls may delete the address entry
created by the previous caller. These deletes use synchronize_rcu, but
this is not permitted in some of the contexts where this function may be
called. During packet recv, the caller may be in a rcu read critical
section and have preemption disabled.
An example stack:
BUG: scheduling while atomic: swapper/2/0/0x00000302
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1))
dump_stack (lib/dump_stack.c:124)
__schedule_bug (kernel/sched/core.c:5943)
schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33 kernel/sched/core.c:5970)
__schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207 kernel/sched/features.h:29 kernel/sched/core.c:6621)
schedule (arch/x86/include/asm/preempt.h:84 kernel/sched/core.c:6804 kernel/sched/core.c:6818)
schedule_timeout (kernel/time/timer.c:2160)
wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116 kernel/sched/completion.c:127 kernel/sched/completion.c:148)
__wait_rcu_gp (include/linux/rcupdate.h:311 kernel/rcu/update.c:444)
synchronize_rcu (kernel/rcu/tree.c:3609)
mptcp_pm_nl_append_new_local_addr (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061)
mptcp_pm_nl_get_local_id (net/mptcp/pm_netlink.c:1164)
mptcp_pm_get_local_id (net/mptcp/pm.c:420)
subflow_check_req (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213)
subflow_v4_route_req (net/mptcp/subflow.c:305)
tcp_conn_request (net/ipv4/tcp_input.c:7216)
subflow_v4_conn_request (net/mptcp/subflow.c:651)
tcp_rcv_state_process (net/ipv4/tcp_input.c:6709)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2334)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234)
ip_local_deliver (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254)
ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580)
ip_sublist_rcv (net/ipv4/ip_input.c:640)
ip_list_rcv (net/ipv4/ip_input.c:675)
__netif_receive_skb_list_core (net/core/dev.c:5583 net/core/dev.c:5631)
netif_receive_skb_list_internal (net/core/dev.c:5685 net/core/dev.c:5774)
napi_complete_done (include/linux/list.h:37 include/net/gro.h:449 include/net/gro.h:444 net/core/dev.c:6114)
igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb
__napi_poll (net/core/dev.c:6582)
net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787)
handle_softirqs (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636)
irq_exit_rcu (kernel/softirq.c:651)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
</IRQ>
This problem seems particularly prevalent if the user advertises an
endpoint that has a different external vs internal address. In the case
where the external address is advertised and multiple connections
already exist, multiple subflow SYNs arrive in parallel which tends to
trigger the race during creation of the first local_addr_list entries
which have the internal address instead.
Fix by skipping the replacement of an existing implicit local address if
called via mptcp_pm_nl_get_local_id.
Fixes: d045b9eb95a9 ("mptcp: introduce implicit endpoints")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250303-net-mptcp-fix-sched-while-atomic-v1-1-f6a216c5a74c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethnl_req_get_phydev() is used to lookup a phy_device, in the case an
ethtool netlink command targets a specific phydev within a netdev's
topology.
It takes as a parameter a const struct nlattr *header that's used for
error handling :
if (!phydev) {
NL_SET_ERR_MSG_ATTR(extack, header,
"no phy matching phyindex");
return ERR_PTR(-ENODEV);
}
In the notify path after a ->set operation however, there's no request
attributes available.
The typical callsite for the above function looks like:
phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER],
info->extack);
So, when tb is NULL (such as in the ethnl notify path), we have a nice
crash.
It turns out that there's only the PLCA command that is in that case, as
the other phydev-specific commands don't have a notification.
This commit fixes the crash by passing the cmd index and the nlattr
array separately, allowing NULL-checking it directly inside the helper.
Fixes: c15e065b46dc ("net: ethtool: Allow passing a phy index for some commands")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reported-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20250301141114.97204-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the
ppp driver not initializing a 2-byte header when using socket filter.
The following code can generate a PPP filter BPF program:
'''
struct bpf_program fp;
pcap_t *handle;
handle = pcap_open_dead(DLT_PPP_PPPD, 65535);
pcap_compile(handle, &fp, "ip and outbound", 0, 0);
bpf_dump(&fp, 1);
'''
Its output is:
'''
(000) ldh [2]
(001) jeq #0x21 jt 2 jf 5
(002) ldb [0]
(003) jeq #0x1 jt 4 jf 5
(004) ret #65535
(005) ret #0
'''
Wen can find similar code at the following link:
https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680
The maintainer of this code repository is also the original maintainer
of the ppp driver.
As you can see the BPF program skips 2 bytes of data and then reads the
'Protocol' field to determine if it's an IP packet. Then it read the first
byte of the first 2 bytes to determine the direction.
The issue is that only the first byte indicating direction is initialized
in current ppp driver code while the second byte is not initialized.
For normal BPF programs generated by libpcap, uninitialized data won't be
used, so it's not a problem. However, for carefully crafted BPF programs,
such as those generated by syzkaller [2], which start reading from offset
0, the uninitialized data will be used and caught by KMSAN.
[1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791
[2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000
Cc: Paul Mackerras <paulus@samba.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+853242d9c9917165d791@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/000000000000dea025060d6bc3bc@google.com/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250228141408.393864-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Luca Weiss says:
====================
Fixes for IPA v4.7
During bringup of IPA v4.7 unfortunately some bits were missed, and it
couldn't be tested much back then due to missing features in tqftpserv
which caused the modem to not enable correctly.
Especially the last commit is important since it makes mobile data
actually functional on SoCs with IPA v4.7 like SM6350 - used on the
Fairphone 4. Before that, you'd get an IP address on the interface but
then e.g. ping never got any response back.
====================
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-0-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable the checksum option for these two endpoints in order to allow
mobile data to actually work. Without this, no packets seem to make it
through the IPA.
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-3-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As per downstream reference, max_writes should be 12 and max_reads
should be 13.
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-2-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the downstream IPA driver there's only one group defined for source
and destination, and the destination group doesn't have a _DPL suffix.
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-1-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During S4 retore flow, quickspi device was resetted by driver and state
was changed to RESETTED. It is needed to be change to ENABLED state
after S4 re-initialization finished, otherwise, device will run in wrong
state and HID input data will be dropped.
Signed-off-by: Even Xu <even.xu@intel.com>
Fixes: 6912aaf3fd24 ("HID: intel-thc-hid: intel-quickspi: Add PM implementation")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There is a spelling mistake in a dev_err_once message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When a hid-steam device is removed it must clean up the client_hdev used for
intercepting hidraw access. This can lead to scheduling deferred work to
reattach the input device. Though the cleanup cancels the deferred work, this
was done before the client_hdev itself is cleaned up, so it gets rescheduled.
This patch fixes the ordering to make sure the deferred work is properly
canceled.
Reported-by: syzbot+0154da2d403396b2bd59@syzkaller.appspotmail.com
Fixes: 79504249d7e2 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
