| Age | Commit message (Collapse) | Author |
|---|
|
We don't want to be holding the srcu lock while waiting on btree write
completions - easily fixed.
Reported-by: Janpieter Sollie <janpieter.sollie@edpnet.be>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We had some error handling confusion here;
-BCH_ERR_missing_indirect_extent is thrown by
trans_trigger_reflink_p_segment(); at this point we haven't decide
whether we're generating an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When not running in VHE mode, cpu_prepare_hyp_mode() computes the value
of TCR_EL2 using the host's TCR_EL1 settings as a starting point. For
nVHE, this amounts to masking out everything apart from the TG0, SH0,
ORGN0, IRGN0 and T0SZ fields before setting the RES1 bits, shifting the
IPS field down to the PS field and setting DS if LPA2 is enabled.
Unfortunately, for hVHE, things go slightly wonky: EPD1 is correctly set
to disable walks via TTBR1_EL2 but then the T1SZ and IPS fields are
corrupted when we mistakenly attempt to initialise the PS and DS fields
in their E2H=0 positions. Furthermore, many fields are retained from
TCR_EL1 which should not be propagated to TCR_EL2. Notably, this means
we can end up with A1 set despite not initialising TTBR1_EL2 at all.
This has been shown to cause unexpected translation faults at EL2 with
pKVM due to TLB invalidation not taking effect when running with a
non-zero ASID.
Fix the TCR_EL2 initialisation code to set PS and DS only when E2H=0,
masking out HD, HA and A1 when E2H=1.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Fixes: ad744e8cb346 ("arm64: Allow arm64_sw.hvhe on command line")
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250214133724.13179-1-will@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
If the TLS handshake attempt returns -ETIMEDOUT, we currently translate
that error into -EACCES. This becomes problematic for cases where the RPC
layer is attempting to re-connect in paths that don't resonably handle
-EACCES, for example: writeback. The RPC layer can handle -ETIMEDOUT quite
well, however - so if the handshake returns this error let's just pass it
along.
Fixes: 75eb6af7acdf ("SUNRPC: Add a TCP-with-TLS RPC transport class")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
If the file is sillyrenamed, and slated for delete on close, it is
possible for a server reboot to triggeer an open reclaim, with can again
race with the application call to close(). When that happens, the call
to put_nfs_open_context() can trigger a synchronous delegreturn call
which deadlocks because it is not marked as privileged.
Instead, ensure that the call to nfs4_inode_return_delegation_on_close()
catches the delegreturn, and schedules it asynchronously.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: adb4b42d19ae ("Return the delegation when deleting sillyrenamed files")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
If rpc_signal_task() is called while a task is in an rpc_call_done()
callback function, and the latter calls rpc_restart_call(), the task can
end up looping due to the RPC_TASK_SIGNALLED flag being set without the
tk_rpc_status being set.
Removing the redundant mechanism for signalling the task fixes the
looping behaviour.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: 39494194f93b ("SUNRPC: Fix races with rpc_killall_tasks()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Adjust the timestamps if O_DIRECT is being combined with attribute
delegations.
Fixes: e12912d94137 ("NFSv4: Add support for delegated atime and mtime attributes")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
While it is uncommon for delegations to be held while O_DIRECT writes
are in progress, it is possible. The xfstests generic/647 and
generic/729 both end up triggering that state, and end up failing due to
the fact that the file size is not adjusted.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219738
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Move code forcing synchronous execution of multishot read requests out
a more generic __io_read().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4ad7b928c776d1ad59addb9fff64ef2d1fc474d5.1739919038.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Initialise ki_complete during request prep stage, we'll depend on it not
being reset during issue in the following patch.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/817624086bd5f0448b08c80623399919fda82f34.1739919038.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We want to avoid checking ->ki_complete directly in the io_uring
completion path. Fortunately we have only two callback the selection
of which depend on the ring constant flags, i.e. IOPOLL, so use that
to infer the function.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4eb4bdab8cbcf5bc87083f7047edc81e920ab83c.1739919038.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
At the moment we can't sanely handle queuing an async request from a
multishot context, so disable them. It shouldn't matter as pollable
files / socekts don't normally do async.
Patching it in __io_read() is not the cleanest way, but it's simpler
than other options, so let's fix it there and clean up on top.
Cc: stable@vger.kernel.org
Reported-by: chase xd <sl1589472800@gmail.com>
Fixes: fc68fcda04910 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7d51732c125159d17db4fe16f51ec41b936973f8.1739919038.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
During disabling the transcoder in DP 128b/132b mode (both in case of an
MST master transcoder and in case of SST) the transcoder function must
be first disabled without changing any other field in the register (in
particular leaving the DDI port and mode select fields unchanged) and
clearing the DDI port and mode select fields separately, later during
the disabling sequences. Fix the sequence accordingly.
Bspec: 54128, 65448, 68849
Cc: Jani Nikula <jani.nikula@intel.com>
Fixes: 79a6734cd56e ("drm/i915/ddi: disable trancoder port select for 128b/132b SST")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-3-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 2ed653c7b843db0670136330480842d76cb65cd8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
At the end of a 128b/132b link training sequence, the HW expects the
transcoder training pattern to be set to TPS2 and from that to normal
mode (disabling the training pattern). Transitioning from TPS1 directly
to normal mode leaves the transcoder in a stuck state, resulting in
page-flip timeouts later in the modeset sequence.
Atm, in case of a failure during link training, the transcoder may be
still set to output the TPS1 pattern. Later the transcoder is then set
from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading
to modeset failures later as described above. Fix this by setting the
training patter to TPS2, if the link training failed at any point.
The clue in the specification about the above HW behavior is the
explicit mention that TPS2 must be set after the link training sequence
(and there isn't a similar requirement specified for the 8b/10b link
training), see the Bspec links below.
v2: Add bspec aspect/link to the commit log. (Jani)
Bspec: 54128, 65448, 68849
Cc: stable@vger.kernel.org # v5.18+
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8b4bbaf8ddc1f68f3ee96a706f65fdb1bcd9d355)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Error handling was wrong, causing unhandled transaction restart errors.
check_directory_size() was also inefficient, since keys in multiple
snapshots would be iterated over once for every snapshot. Convert it to
the same scheme used for i_sectors and subdir count checking.
Cc: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When compiling without CONFIG_IA32_EMULATION, there can be some errors:
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘mailbox_release_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:197:2: error: implicit declaration
of function ‘kfree’.
197 | kfree(mb_msg);
| ^~~~~
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘xdna_mailbox_send_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:418:11: error:implicit declaration
of function ‘kzalloc’.
418 | mb_msg = kzalloc(sizeof(*mb_msg) + pkg_size, GFP_KERNEL);
| ^~~~~~~
Add the missing include.
Fixes: b87f920b9344 ("accel/amdxdna: Support hardware mailbox")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211015354.3388171-1-suhui@nfschina.com
|
|
The issue was caused by dput(upper) being called before
ovl_dentry_update_reval(), while upper->d_flags was still
accessed in ovl_dentry_remote().
Move dput(upper) after its last use to prevent use-after-free.
BUG: KASAN: slab-use-after-free in ovl_dentry_remote fs/overlayfs/util.c:162 [inline]
BUG: KASAN: slab-use-after-free in ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
ovl_dentry_remote fs/overlayfs/util.c:162 [inline]
ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167
ovl_link_up fs/overlayfs/copy_up.c:610 [inline]
ovl_copy_up_one+0x2105/0x3490 fs/overlayfs/copy_up.c:1170
ovl_copy_up_flags+0x18d/0x200 fs/overlayfs/copy_up.c:1223
ovl_rename+0x39e/0x18c0 fs/overlayfs/dir.c:1136
vfs_rename+0xf84/0x20a0 fs/namei.c:4893
...
</TASK>
Fixes: b07d5cc93e1b ("ovl: update of dentry revalidate flags after copy up")
Reported-by: syzbot+316db8a1191938280eb6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=316db8a1191938280eb6
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20250214215148.761147-1-kovalev@altlinux.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
directory nodes
If the reparse point was not handled (indicated by the -EOPNOTSUPP from
ops->parse_reparse_point() call) but reparse tag is of type name surrogate
directory type, then treat is as a new mount point.
Name surrogate reparse point represents another named entity in the system.
From SMB client point of view, this another entity is resolved on the SMB
server, and server serves its content automatically. Therefore from Linux
client point of view, this name surrogate reparse point of directory type
crosses mount point.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
parse_reparse_point()
This would help to track and detect by caller if the reparse point type was
processed or not.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
POSIX extensions
If a file size has bits 0x410 = ATTR_DIRECTORY | ATTR_REPARSE set
then during queryinfo (stat) the file is regarded as a directory
and subsequent opens can fail. A simple test example is trying
to open any file 1040 bytes long when mounting with "posix"
(SMB3.1.1 POSIX/Linux Extensions).
The cause of this bug is that Attributes field in smb2_file_all_info
struct occupies the same place that EndOfFile field in
smb311_posix_qinfo, and sometimes the latter struct is incorrectly
processed as if it was the first one.
Reported-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Tested-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with flexible-array members in the
middle of other structs, we use the `__struct_group()` helper to
separate the flexible arrays from the rest of the members in the
flexible structures. We then use the newly created tagged `struct
smb2_file_link_info_hdr` and `struct smb2_file_rename_info_hdr`
to replace the type of the objects causing trouble: `rename_info`
and `link_info` in `struct smb2_compound_vars`.
We also want to ensure that when new members need to be added to the
flexible structures, they are always included within the newly created
tagged structs. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
So, with these changes, fix 86 of the following warnings:
fs/smb/client/cifsglob.h:2335:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/smb/client/cifsglob.h:2334:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
IO_NODE_ALLOC_CACHE_MAX has been unused since commit fbbb8e991d86
("io_uring/rsrc: get rid of io_rsrc_node allocation cache") removed the
rsrc_node_cache.
IO_RSRC_TAG_TABLE_SHIFT and IO_RSRC_TAG_TABLE_MASK have been unused
since commit 7029acd8a950 ("io_uring/rsrc: get rid of per-ring
io_rsrc_node list") removed the separate tag table for registered nodes.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20250219033444.2020136-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/fixes
Fix writes on SST flashes
Commit 18bcb4aa54ea ("mtd: spi-nor: sst: Factor out common write
operation to `sst_nor_write_data()`") introduced a bug where only one
byte of data is written, regardless of the number of bytes requested.
This causes the driver to use the incorrect write size for flashes using
the SST byte programming, and to spit out a warning.
# -----BEGIN PGP SIGNATURE-----
#
# iIoEABYIADIWIQQTlUWNzXGEo3bFmyIR4drqP028CQUCZ7NEiBQccHJhdHl1c2hA
# a2VybmVsLm9yZwAKCRAR4drqP028CTVnAP9krBOLfmlYO94PntaDscgjcehnxbuF
# PEQby8/KlEnX0gEA5K73/0oQIZUnHQ98E6ntAtKoYD5zGNAJaYDpw+66CAU=
# =5xea
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 17 Feb 2025 03:15:36 PM CET
# gpg: using EDDSA key 1395458DCD7184A376C59B2211E1DAEA3F4DBC09
# gpg: issuer "pratyush@kernel.org"
# gpg: Good signature from "Pratyush Yadav <p.yadav@ti.com>" [expired]
# gpg: aka "Pratyush Yadav <me@yadavpratyush.com>" [expired]
# gpg: issuer "pratyush@kernel.org" does not match any User ID
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 805C 3923 2FBE 108C 49E1 663C F650 3556 C11B 1CCD
# Subkey fingerprint: 1395 458D CD71 84A3 76C5 9B22 11E1 DAEA 3F4D BC09
|
|
Add NULL check before variable dereference to fix static checker warning.
Fixes: d76d22b5096c ("mtd: rawnand: cadence: use dma_map_resource for sdma address")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/e448a22c-bada-448d-9167-7af71305130d@stanley.mountain/
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
I was pondering with myself for a while if I should just make it official
that I'm not really involved in the kernel community anymore, neither as a
reviewer, nor as a maintainer.
Most of the time I simply excused myself with "if something urgent comes
up, I can chime in and help out". Lyude and Danilo are doing a wonderful
job and I've put all my trust into them.
However, there is one thing I can't stand and it's hurting me the most.
I'm convinced, no, my core believe is, that inclusivity and respect,
working with others as equals, no power plays involved, is how we should
work together within the Free and Open Source community.
I can understand maintainers needing to learn, being concerned on
technical points. Everybody deserves the time to understand and learn. It
is my true belief that most people are capable of change eventually. I
truly believe this community can change from within, however this doesn't
mean it's going to be a smooth process.
The moment I made up my mind about this was reading the following words
written by a maintainer within the kernel community:
"we are the thin blue line"
This isn't okay. This isn't creating an inclusive environment. This isn't
okay with the current political situation especially in the US. A
maintainer speaking those words can't be kept. No matter how important
or critical or relevant they are. They need to be removed until they
learn. Learn what those words mean for a lot of marginalized people. Learn
about what horrors it evokes in their minds.
I can't in good faith remain to be part of a project and its community
where those words are tolerated. Those words are not technical, they are
a political statement. Even if unintentionally, such words carry power,
they carry meanings one needs to be aware of. They do cause an immense
amount of harm.
I wish the best of luck for everybody to continue to try to work from
within. You got my full support and I won't hold it against anybody trying
to improve the community, it's a thankless job, it's a lot of work. People
will continue to burn out.
I got burned out enough by myself caring about the bits I maintained, but
eventually I had to realize my limits. The obligation I felt was eating me
from inside. It stopped being fun at some point and I reached a point
where I simply couldn't continue the work I was so motivated doing as I've
did in the early days.
Please respect my wishes and put this statement as is into the tree.
Leaving anything out destroys its entire meaning.
Respectfully
Karol
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250215073753.1217002-2-kherbst@redhat.com
|
|
Most kernel configs enable multiple Tegra SoC generations, causing this
typo to go unnoticed. But in the case where a kernel config is strictly
for Tegra186, this is a problem.
Fixes: 989863d7cbe5 ("drm/nouveau/pmu: select implementation based on available firmware")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218-nouveau-gm10b-guard-v2-1-a4de71500d48@gmail.com
|
|
The system can experience a random crash a few minutes after the driver is
removed. This issue occurs due to improper handling of memory freeing in
the ishtp_hid_remove() function.
The function currently frees the `driver_data` directly within the loop
that destroys the HID devices, which can lead to accessing freed memory.
Specifically, `hid_destroy_device()` uses `driver_data` when it calls
`hid_ishtp_set_feature()` to power off the sensor, so freeing
`driver_data` beforehand can result in accessing invalid memory.
This patch resolves the issue by storing the `driver_data` in a temporary
variable before calling `hid_destroy_device()`, and then freeing the
`driver_data` after the device is destroyed.
Fixes: 0b28cb4bcb17 ("HID: intel-ish-hid: ISH HID client driver")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
During the `rmmod` operation for the `intel_ishtp_hid` driver, a
use-after-free issue can occur in the hid_ishtp_cl_remove() function.
The function hid_ishtp_cl_deinit() is called before ishtp_hid_remove(),
which can lead to accessing freed memory or resources during the
removal process.
Call Trace:
? ishtp_cl_send+0x168/0x220 [intel_ishtp]
? hid_output_report+0xe3/0x150 [hid]
hid_ishtp_set_feature+0xb5/0x120 [intel_ishtp_hid]
ishtp_hid_request+0x7b/0xb0 [intel_ishtp_hid]
hid_hw_request+0x1f/0x40 [hid]
sensor_hub_set_feature+0x11f/0x190 [hid_sensor_hub]
_hid_sensor_power_state+0x147/0x1e0 [hid_sensor_trigger]
hid_sensor_runtime_resume+0x22/0x30 [hid_sensor_trigger]
sensor_hub_remove+0xa8/0xe0 [hid_sensor_hub]
hid_device_remove+0x49/0xb0 [hid]
hid_destroy_device+0x6f/0x90 [hid]
ishtp_hid_remove+0x42/0x70 [intel_ishtp_hid]
hid_ishtp_cl_remove+0x6b/0xb0 [intel_ishtp_hid]
ishtp_cl_device_remove+0x4a/0x60 [intel_ishtp]
...
Additionally, ishtp_hid_remove() is a HID level power off, which should
occur before the ISHTP level disconnect.
This patch resolves the issue by reordering the calls in
hid_ishtp_cl_remove(). The function ishtp_hid_remove() is now
called before hid_ishtp_cl_deinit().
Fixes: f645a90e8ff7 ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
As reported by the kernel test robot, the following warning occurs:
>> drivers/hid/hid-google-hammer.c:261:36: warning: 'cbas_ec_acpi_ids' defined but not used [-Wunused-const-variable=]
261 | static const struct acpi_device_id cbas_ec_acpi_ids[] = {
| ^~~~~~~~~~~~~~~~
The 'cbas_ec_acpi_ids' array is only used when CONFIG_ACPI is enabled.
Wrapping its definition and 'MODULE_DEVICE_TABLE' in '#ifdef CONFIG_ACPI'
prevents a compiler warning when ACPI is disabled.
Fixes: eb1aac4c8744f75 ("HID: google: add support tablet mode switch for Whiskers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501201141.jctFH5eB-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This fixes the button event map to match the 3-button recommendation
as well as the redundant 'z' in the button map events for the Sega
MD/Gen 6 Button.
Signed-off-by: Ryan McClelland <rymcclel@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The current implementation has a bug: If the current css doesn't
contain any pool that is a descendant of the "pool" (i.e. when
found_descendant == false), then "pool" will point to some unrelated
pool. If the current css has a child, we'll overwrite parent_pool with
this unrelated pool on the next iteration.
Since we can just check whether a pool refers to the same region to
determine whether or not it's related, all the additional pool tracking
is unnecessary, so just switch to using css_for_each_descendant_pre for
traversal.
Fixes: b168ed458dde ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127152754.21325-1-friedrich.vock@gmx.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
commit 5731d41af924 ("cxl: Deprecate driver") labelled the cxl driver as
deprecated and moved the ABI documentation to the obsolete/ subdirectory,
but didn't update cxl.rst, causing a warning once ff7ff6eb4f809 ("docs:
media: Allow creating cross-references for RC ABI") was merged.
Fix the cross-reference, and also add a deprecation warning.
Fixes: 5731d41af924 ("cxl: Deprecate driver")
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250219064807.175107-1-ajd@linux.ibm.com
|
|
Kuniyuki Iwashima says:
====================
net: Fix race of rtnl_net_lock(dev_net(dev)).
Yael Chemla reported that commit 7fb1073300a2 ("net: Hold rtnl_net_lock()
in (un)?register_netdevice_notifier_dev_net().") started to trigger KASAN's
use-after-free splat.
The problem is that dev_net(dev) fetched before rtnl_net_lock() might be
different after rtnl_net_lock().
The patch 2 fixes the issue by checking dev_net(dev) after rtnl_net_lock(),
and the patch 3 fixes the same potential issue that would emerge once RTNL
is removed.
v4: https://lore.kernel.org/20250212064206.18159-1-kuniyu@amazon.com
v3: https://lore.kernel.org/20250211051217.12613-1-kuniyu@amazon.com
v2: https://lore.kernel.org/20250207044251.65421-1-kuniyu@amazon.com
v1: https://lore.kernel.org/20250130232435.43622-1-kuniyu@amazon.com
====================
Link: https://patch.msgid.link/20250217191129.19967-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following sequence is basically illegal when dev was fetched
without lookup because dev_net(dev) might be different after holding
rtnl_net_lock():
net = dev_net(dev);
rtnl_net_lock(net);
Let's use rtnl_net_dev_lock() in unregister_netdev().
Note that there is no real bug in unregister_netdev() for now
because RTNL protects the scope even if dev_net(dev) is changed
before/after RTNL.
Fixes: 00fb9823939e ("dev: Hold per-netns RTNL in (un)?register_netdev().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the cited commit, dev_net(dev) is fetched before holding RTNL
and passed to __unregister_netdevice_notifier_net().
However, dev_net(dev) might be different after holding RTNL.
In the reported case [0], while removing a VF device, its netns was
being dismantled and the VF was moved to init_net.
So the following sequence is basically illegal when dev was fetched
without lookup:
net = dev_net(dev);
rtnl_net_lock(net);
Let's use a new helper rtnl_net_dev_lock() to fix the race.
It fetches dev_net_rcu(dev), bumps its net->passive, and checks if
dev_net_rcu(dev) is changed after rtnl_net_lock().
[0]:
BUG: KASAN: slab-use-after-free in notifier_call_chain (kernel/notifier.c:75 (discriminator 2))
Read of size 8 at addr ffff88810cefb4c8 by task test-bridge-lag/21127
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:489)
kasan_report (mm/kasan/report.c:604)
notifier_call_chain (kernel/notifier.c:75 (discriminator 2))
call_netdevice_notifiers_info (net/core/dev.c:2011)
unregister_netdevice_many_notify (net/core/dev.c:11551)
unregister_netdevice_queue (net/core/dev.c:11487)
unregister_netdev (net/core/dev.c:11635)
mlx5e_remove (drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6552 drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6579) mlx5_core
auxiliary_bus_remove (drivers/base/auxiliary.c:230)
device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296)
bus_remove_device (./include/linux/kobject.h:193 drivers/base/base.h:73 drivers/base/bus.c:583)
device_del (drivers/base/power/power.h:142 drivers/base/core.c:3855)
mlx5_rescan_drivers_locked (./include/linux/auxiliary_bus.h:241 drivers/net/ethernet/mellanox/mlx5/core/dev.c:333 drivers/net/ethernet/mellanox/mlx5/core/dev.c:535 drivers/net/ethernet/mellanox/mlx5/core/dev.c:549) mlx5_core
mlx5_unregister_device (drivers/net/ethernet/mellanox/mlx5/core/dev.c:468) mlx5_core
mlx5_uninit_one (./include/linux/instrumented.h:68 ./include/asm-generic/bitops/instrumented-non-atomic.h:141 drivers/net/ethernet/mellanox/mlx5/core/main.c:1563) mlx5_core
remove_one (drivers/net/ethernet/mellanox/mlx5/core/main.c:965 drivers/net/ethernet/mellanox/mlx5/core/main.c:2019) mlx5_core
pci_device_remove (./include/linux/pm_runtime.h:129 drivers/pci/pci-driver.c:475)
device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296)
unbind_store (drivers/base/bus.c:245)
kernfs_fop_write_iter (fs/kernfs/file.c:338)
vfs_write (fs/read_write.c:587 (discriminator 1) fs/read_write.c:679 (discriminator 1))
ksys_write (fs/read_write.c:732)
do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f6a4d5018b7
Fixes: 7fb1073300a2 ("net: Hold rtnl_net_lock() in (un)?register_netdevice_notifier_dev_net().")
Reported-by: Yael Chemla <ychemla@nvidia.com>
Closes: https://lore.kernel.org/netdev/146eabfe-123c-4970-901e-e961b4c09bc3@nvidia.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net_drop_ns() is NULL when CONFIG_NET_NS is disabled.
The next patch introduces a function that increments
and decrements net->passive.
As a prep, let's rename and export net_free() to
net_passive_dec() and add net_passive_inc().
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/CANn89i+oUCt2VGvrbrweniTendZFEh+nwS=uonc004-aPkWy-Q@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix incorrect data offset read in the pd692x0_pi_get_pw_limit callback.
The issue was previously unnoticed as it was only used by the regulator
API and not thoroughly tested, since the PSE is mainly controlled via
ethtool.
The function became actively used by ethtool after commit 3e9dbfec4998
("net: pse-pd: Split ethtool_get_status into multiple callbacks"),
which led to the discovery of this issue.
Fix it by using the correct data offset.
Fixes: a87e699c9d33 ("net: pse-pd: pd692x0: Enhance with new current limit and voltage read callbacks")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250217134812.1925345-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We requested in the past that GVE patches coming out of Google should
be submitted only by GVE maintainers. There were too many patches
posted which didn't follow the subsystem guidance.
Recently Joshua was added to maintainers, but even tho he was asked
to follow the netdev "FAQ" in the past [1] he does not follow
the local customs. It is not reasonable for a person who hasn't read
the maintainer entry for the subsystem to be a driver maintainer.
We can re-add once Joshua does some on-list reviews to prove
the fluency with the upstream process.
Link: https://lore.kernel.org/20240610172720.073d5912@kernel.org # [1]
Link: https://patch.msgid.link/20250215162646.2446559-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before this patch the NETDEV_XDP_ACT_NDO_XMIT XDP feature flag is set by
default as part of driver initialization, and is never cleared. However,
this flag differs from others in that it is used as an indicator for
whether the driver is ready to perform the ndo_xdp_xmit operation as
part of an XDP_REDIRECT. Kernel helpers
xdp_features_(set|clear)_redirect_target exist to convey this meaning.
This patch ensures that the netdev is only reported as a redirect target
when XDP queues exist to forward traffic.
Fixes: 39a7f4aa3e4a ("gve: Add XDP REDIRECT support for GQI-QPL format")
Cc: stable@vger.kernel.org
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20250214224417.1237818-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ufshcd_is_ufs_dev_busy(), ufshcd_print_host_state() and
ufshcd_eh_timed_out() are used in both modes (legacy mode and MCQ mode).
hba->outstanding_reqs only represents the outstanding requests in legacy
mode. Hence, change hba->outstanding_reqs into scsi_host_busy(hba->host) in
these functions.
Fixes: eacb139b77ff ("scsi: ufs: core: mcq: Enable multi-circular queue")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250214224352.3025151-1-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Yan Zhai says:
====================
bpf: skip non exist keys in generic_map_lookup_batch
The generic_map_lookup_batch currently returns EINTR if it fails with
ENOENT and retries several times on bpf_map_copy_value. The next batch
would start from the same location, presuming it's a transient issue.
This is incorrect if a map can actually have "holes", i.e.
"get_next_key" can return a key that does not point to a valid value. At
least the array of maps type may contain such holes legitly. Right now
these holes show up, generic batch lookup cannot proceed any more. It
will always fail with EINTR errors.
This patch fixes this behavior by skipping the non-existing key, and
does not return EINTR any more.
V2->V3: deleted a unused macro
V1->V2: split the fix and selftests; fixed a few selftests issues.
V2: https://lore.kernel.org/bpf/cover.1738905497.git.yan@cloudflare.com/
V1: https://lore.kernel.org/bpf/Z6OYbS4WqQnmzi2z@debian.debian/
====================
Link: https://patch.msgid.link/cover.1739171594.git.yan@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Iterating through array of maps may encounter non existing keys. The
batch operation should not fail on when this happens.
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/9007237b9606dc2ee44465a4447fe46e13f3bea6.1739171594.git.yan@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The generic_map_lookup_batch currently returns EINTR if it fails with
ENOENT and retries several times on bpf_map_copy_value. The next batch
would start from the same location, presuming it's a transient issue.
This is incorrect if a map can actually have "holes", i.e.
"get_next_key" can return a key that does not point to a valid value. At
least the array of maps type may contain such holes legitly. Right now
these holes show up, generic batch lookup cannot proceed any more. It
will always fail with EINTR errors.
Rather, do not retry in generic_map_lookup_batch. If it finds a non
existing element, skip to the next key. This simple solution comes with
a price that transient errors may not be recovered, and the iteration
might cycle back to the first key under parallel deletion. For example,
Hou Tao <houtao@huaweicloud.com> pointed out a following scenario:
For LPM trie map:
(1) ->map_get_next_key(map, prev_key, key) returns a valid key
(2) bpf_map_copy_value() return -ENOMENT
It means the key must be deleted concurrently.
(3) goto next_key
It swaps the prev_key and key
(4) ->map_get_next_key(map, prev_key, key) again
prev_key points to a non-existing key, for LPM trie it will treat just
like prev_key=NULL case, the returned key will be duplicated.
With the retry logic, the iteration can continue to the key next to the
deleted one. But if we directly skip to the next key, the iteration loop
would restart from the first key for the lpm_trie type.
However, not all races may be recovered. For example, if current key is
deleted after instead of before bpf_map_copy_value, or if the prev_key
also gets deleted, then the loop will still restart from the first key
for lpm_tire anyway. For generic lookup it might be better to stay
simple, i.e. just skip to the next key. To guarantee that the output
keys are not duplicated, it is better to implement map type specific
batch operations, which can properly lock the trie and synchronize with
concurrent mutators.
Fixes: cb4d03ab499d ("bpf: Add generic support for lookup batch op")
Closes: https://lore.kernel.org/bpf/Z6JXtA1M5jAZx8xD@debian.debian/
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/85618439eea75930630685c467ccefeac0942e2b.1739171594.git.yan@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Since commit under Fixes we set the window clamp in accordance
to newly measured rcvbuf scaling_ratio. If the scaling_ratio
decreased significantly we may put ourselves in a situation
where windows become smaller than rcvq_space, preventing
tcp_rcv_space_adjust() from increasing rcvbuf.
The significant decrease of scaling_ratio is far more likely
since commit 697a6c8cec03 ("tcp: increase the default TCP scaling ratio"),
which increased the "default" scaling ratio from ~30% to 50%.
Hitting the bad condition depends a lot on TCP tuning, and
drivers at play. One of Meta's workloads hits it reliably
under following conditions:
- default rcvbuf of 125k
- sender MTU 1500, receiver MTU 5000
- driver settles on scaling_ratio of 78 for the config above.
Initial rcvq_space gets calculated as TCP_INIT_CWND * tp->advmss
(10 * 5k = 50k). Once we find out the true scaling ratio and
MSS we clamp the windows to 38k. Triggering the condition also
depends on the message sequence of this workload. I can't repro
the problem with simple iperf or TCP_RR-style tests.
Fixes: a2cbb1603943 ("tcp: Update window clamping condition")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250217232905.3162187-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is obviously not that important, but when changes are synced back
from the kernel to liburing, the codespell CI ends up erroring because
of this misspelling. Let's just correct it and avoid this biting us
again on an import.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use %zx format to print size_t to remove the following warning when
building for i386:
>> drivers/gpu/drm/xe/xe_guc_ct.c:1727:43: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
1727 | drm_printf(p, "[CTB].length: 0x%lx\n", snapshot->ctb_size);
| ~~~ ^~~~~~~~~~~~~~~~~~
| %zx
Cc: José Roberto de Souza <jose.souza@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501281627.H6nj184e-lkp@intel.com/
Fixes: 643f209ba3fd ("drm/xe: Make GUC binaries dump consistent with other binaries in devcoredump")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250128154242.3371687-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 7748289df510638ba61fed86b59ce7d2fb4a194c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
corsair_void_process_receiver can be called from an interrupt context,
locking battery_mutex in it was causing a kernel panic.
Fix it by moving the critical section into its own work, sharing this
work with battery_add_work and battery_remove_work to remove the need
for any locking
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1236843
Fixes: 6ea2a6fd3872 ("HID: corsair-void: Add Corsair Void headset family driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
TX launch polarity needs to be the opposite of RX capture polarity, to
generate the right bit slot alignment.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250218-apple-codec-changes-v2-28-932760fd7e07@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250218-apple-codec-changes-v2-1-932760fd7e07@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Q is exported from Makefile.include so it is not necessary to manually
set it.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Mykola Lysenko <mykolal@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20250213-quiet_tools-v3-2-07de4482a581@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
