summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-09-27nvme: add command id quirk for apple controllersKeith Busch
Some apple controllers use the command id as an index to implementation specific data structures and will fail if the value is out of bounds. The nvme driver's recently introduced command sequence number breaks this controller. Provide a quirk so these spec incompliant controllers can function as before. The driver will not have the ability to detect bad completions when this quirk is used, but we weren't previously checking this anyway. The quirk bit was selected so that it can readily apply to stable. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214509 Cc: Sven Peter <sven@svenpeter.dev> Reported-by: Orlando Chamberlain <redecorating@protonmail.com> Reported-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20210927154306.387437-1-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-27e100: fix buffer overrun in e100_get_regsJacob Keller
The e100_get_regs function is used to implement a simple register dump for the e100 device. The data is broken into a couple of MAC control registers, and then a series of PHY registers, followed by a memory dump buffer. The total length of the register dump is defined as (1 + E100_PHY_REGS) * sizeof(u32) + sizeof(nic->mem->dump_buf). The logic for filling in the PHY registers uses a convoluted inverted count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This is actually one more than the supposed number of PHY registers. The memory dump buffer is then filled into the space at [2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past the total size. The end result is that we overrun the total buffer size allocated by the kernel, which could lead to a panic or other issues due to memory corruption. It is difficult to determine the actual total number of registers here. The only 8255x datasheet I could find indicates there are 28 total MDI registers. However, we're reading 29 here, and reading them in reverse! In addition, the ethtool e100 register dump interface appears to read the first PHY register to determine if the device is in MDI or MDIx mode. This doesn't appear to be documented anywhere within the 8255x datasheet. I can only assume it must be in register 28 (the extra register we're reading here). Lets not change any of the intended meaning of what we copy here. Just extend the space by 4 bytes to account for the extra register and continue copying the data out in the same order. Change the E100_PHY_REGS value to be the correct total (29) so that the total register dump size is calculated properly. Fix the offset for where we copy the dump buffer so that it doesn't overrun the total size. Re-write the for loop to use counting up instead of the convoluted down-counting. Correct the mdio_read offset to use the 0-based register offsets, but maintain the bizarre reverse ordering so that we have the ABI expected by applications like ethtool. This requires and additional subtraction of 1. It seems a bit odd but it makes the flow of assignment into the register buffer easier to follow. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-27e100: fix length calculation in e100_get_regs_lenJacob Keller
commit abf9b902059f ("e100: cleanup unneeded math") tried to simplify e100_get_regs_len and remove a double 'divide and then multiply' calculation that the e100_reg_regs_len function did. This change broke the size calculation entirely as it failed to account for the fact that the numbered registers are actually 4 bytes wide and not 1 byte. This resulted in a significant under allocation of the register buffer used by e100_get_regs. Fix this by properly multiplying the register count by u32 first before adding the size of the dump buffer. Fixes: abf9b902059f ("e100: cleanup unneeded math") Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-27ipack: ipoctal: fix module reference leakJohan Hovold
A reference to the carrier module was taken on every open but was only released once when the final reference to the tty struct was dropped. Fix this by taking the module reference and initialising the tty driver data when installing the tty. Fixes: 82a82340bab6 ("ipoctal: get carrier driver to avoid rmmod") Cc: stable@vger.kernel.org # 3.18 Cc: Federico Vaga <federico.vaga@cern.ch> Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210917114622.5412-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-27ipack: ipoctal: fix missing allocation-failure checkJohan Hovold
Add the missing error handling when allocating the transmit buffer to avoid dereferencing a NULL pointer in write() should the allocation ever fail. Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board") Cc: stable@vger.kernel.org # 3.5 Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210917114622.5412-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-27ipack: ipoctal: fix tty-registration error handlingJohan Hovold
Registration of the ipoctal tty devices is unlikely to fail, but if it ever does, make sure not to deregister a never registered tty device (and dereference a NULL pointer) when the driver is later unbound. Fixes: 2afb41d9d30d ("Staging: ipack/devices/ipoctal: Check tty_register_device return value.") Cc: stable@vger.kernel.org # 3.7 Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210917114622.5412-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-27ipack: ipoctal: fix tty registration raceJohan Hovold
Make sure to set the tty class-device driver data before registering the tty to avoid having a racing open() dereference a NULL pointer. Fixes: 9c1d784afc6f ("Staging: ipack/devices/ipoctal: Get rid of ipoctal_list.") Cc: stable@vger.kernel.org # 3.7 Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210917114622.5412-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-27ipack: ipoctal: fix stack information leakJohan Hovold
The tty driver name is used also after registering the driver and must specifically not be allocated on the stack to avoid leaking information to user space (or triggering an oops). Drivers should not try to encode topology information in the tty device name but this one snuck in through staging without anyone noticing and another driver has since copied this malpractice. Fixing the ABI is a separate issue, but this at least plugs the security hole. Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board") Cc: stable@vger.kernel.org # 3.5 Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210917114622.5412-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-27KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issueZhenzhong Duan
When updating the host's mask for its MSR_IA32_TSX_CTRL user return entry, clear the mask in the found uret MSR instead of vmx->guest_uret_msrs[i]. Modifying guest_uret_msrs directly is completely broken as 'i' does not point at the MSR_IA32_TSX_CTRL entry. In fact, it's guaranteed to be an out-of-bounds accesses as is always set to kvm_nr_uret_msrs in a prior loop. By sheer dumb luck, the fallout is limited to "only" failing to preserve the host's TSX_CTRL_CPUID_CLEAR. The out-of-bounds access is benign as it's guaranteed to clear a bit in a guest MSR value, which are always zero at vCPU creation on both x86-64 and i386. Cc: stable@vger.kernel.org Fixes: 8ea8b8d6f869 ("KVM: VMX: Use common x86's uret MSR list as the one true list") Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210926015545.281083-1-zhenzhong.duan@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-27Merge tag 'icc-5.15-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Georgi writes: interconnect fixes for v5.15 This contains a few fixes for the sdm660 driver: - sdm660: Fix id of slv_cnoc_mnoc_cfg - sdm660: Correct NOC_QOS_PRIORITY shift and mask - sdm660: Add missing a2noc qos clocks Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: sdm660: Add missing a2noc qos clocks dt-bindings: interconnect: sdm660: Add missing a2noc qos clocks interconnect: qcom: sdm660: Correct NOC_QOS_PRIORITY shift and mask interconnect: qcom: sdm660: Fix id of slv_cnoc_mnoc_cfg
2021-09-27NIOS2: setup.c: drop unused variable 'dram_start'Randy Dunlap
This is a nuisance when CONFIG_WERROR is set, so drop the variable declaration since the code that used it was removed. ../arch/nios2/kernel/setup.c: In function 'setup_arch': ../arch/nios2/kernel/setup.c:152:13: warning: unused variable 'dram_start' [-Wunused-variable] 152 | int dram_start; Fixes: 7f7bc20bc41a ("nios2: Don't use _end for calculating min_low_pfn") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Andreas Oetken <andreas.oetken@siemens.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-09-27net: phy: enhance GPY115 loopback disable functionXu Liang
GPY115 need reset PHY when it comes out from loopback mode if the firmware version number (lower 8 bits) is equal to or below 0x76. Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Xu Liang <lxu@maxlinear.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27perf iostat: Fix Segmentation fault from NULL 'struct perf_counts_values *'Like Xu
If the 'perf iostat' user specifies two or more iio_root_ports and also specifies the cpu(s) by -C which is not *connected to all* the above iio ports, the iostat_print_metric() will run into trouble: For example: $ perf iostat list S0-uncore_iio_0<0000:16> S1-uncore_iio_0<0000:97> # <--- CPU 1 is located in the socket S0 $ perf iostat 0000:16,0000:97 -C 1 -- ls port Inbound Read(MB) Inbound Write(MB) Outbound Read(MB) Outbound Write(MB) ../perf-iostat: line 12: 104418 Segmentation fault (core dumped) perf stat --iostat$DELIMITER$* The core-dump stack says, in the above corner case, the returned (struct perf_counts_values *) count will be NULL, and the caller iostat_print_metric() apparently doesn't not handle this case. 433 struct perf_counts_values *count = perf_counts(evsel->counts, die, 0); 434 435 if (count->run && count->ena) { (gdb) p count $1 = (struct perf_counts_values *) 0x0 The deeper reason is that there are actually no statistics from the user specified pair "iostat 0000:X, -C (disconnected) Y ", but let's fix it with minimum cost by adding a NULL check in the user space. Fixes: f9ed693e8bc0e7de ("perf stat: Enable iostat mode for x86 platforms") Signed-off-by: Like Xu <likexu@tencent.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210927081115.39568-2-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-27Merge tag 'mac80211-for-net-2021-09-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes berg says: ==================== Some fixes: * potential use-after-free in CCMP/GCMP RX processing * potential use-after-free in TX A-MSDU processing * revert to low data rates for no-ack as the commit broke other things * limit VHT MCS/NSS in radiotap injection * drop frames with invalid addresses in IBSS mode * check rhashtable_init() return value in mesh * fix potentially unaligned access in mesh * fix late beacon hrtimer handling in hwsim (syzbot) * fix documentation for PTK0 rekeying ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27perf iostat: Use system-wide mode if the target cpu_list is unspecifiedLike Xu
An iostate use case like "perf iostat 0000:16,0000:97 -- ls" should be implemented to work in system-wide mode to ensure that the output from print_header() is consistent with the user documentation perf-iostat.txt, rather than incorrectly assuming that the kernel does not support it: Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) \ for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. This error is easily fixed by assigning system-wide mode by default for IOSTAT_RUN only when the target cpu_list is unspecified. Fixes: f07952b179697771 ("perf stat: Basic support for iostat in perf") Signed-off-by: Like Xu <likexu@tencent.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210927081115.39568-1-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-27perf config: Refine error message to eliminate confusionLike Xu
If there is no configuration file at first, the user can write any pair of "key.subkey=value" to the newly created configuration file, while value validation against a valid configurable key is *deferred* until the next execution or the implied execution of "perf config ... ". For example: $ rm ~/.perfconfig $ perf config call-graph.dump-size=65529 $ cat ~/.perfconfig # this file is auto-generated. [call-graph] dump-size = 65529 $ perf config call-graph.dump-size=2048 callchain: Incorrect stack dump size (max 65528): 65529 Error: wrong config key-value pair call-graph.dump-size=65529 The user might expect that the second value 2048 is valid and can be updated to the configuration file, but the error message is very confusing because the first value 65529 is not reported as an error during the last configuration. It is recommended not to change the current behavior of delayed validation (as more effort is needed), but to refine the original error message to *clearly indicate* that the cause of the error is the configuration file. Signed-off-by: Like Xu <likexu@tencent.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210924115817.58689-1-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-27perf doc: Fix typos all over the placeLike Xu
Considering that perf and its subcommands have so many parameters, the documentation is always the first stop for perf beginners. Fixing some spelling errors will relax the eyes of some readers a little bit. s/specicfication/specification/ s/caheline/cacheline/ s/tranasaction/transaction/ s/complan/complain/ s/sched_wakep/sched_wakeup/ s/possble/possible/ s/methology/methodology/ Signed-off-by: Like Xu <likexu@tencent.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210924081942.38368-1-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-27perf arm: Fix off-by-one directory paths.Ian Rogers
Relative path include works in the regular build due to -I paths but may fail in other situations. v2. Rebase. Comments on v1 were that we should handle include paths differently and it is agreed that can be a sensible refactor but beyond the scope of this change. https://lore.kernel.org/lkml/20210504191227.793712-1-irogers@google.com/ Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20210923154254.737657-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-27perf vendor events powerpc: Fix spelling mistake "icach" -> "icache"Colin Ian King
There is a spelling mistake in the description text, fix it. Signed-off-by: Colin King <colin.king@canonical.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-janitors@vger.kernel.org Link: http://lore.kernel.org/lkml/20210916081314.41751-1-colin.king@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-27perf tests: Fix flaky test 'Object code reading'James Clark
This test occasionally fails on aarch64 when a sample is taken in free@plt and it fails with "Bytes read differ from those read by objdump". This is because that symbol is near a section boundary in the elf file. Despite the -z option to always output zeros, objdump uses bfd_map_over_sections() to iterate through the elf file so it doesn't see outside of the sections where these zeros are and can't print them. For example this boundary proceeds free@plt in libc with a gap of 48 bytes between .plt and .text: objdump -d -z --start-address=0x23cc8 --stop-address=0x23d08 libc-2.30.so libc-2.30.so: file format elf64-littleaarch64 Disassembly of section .plt: 0000000000023cc8 <*ABS*+0x7fd00@plt+0x8>: 23cc8: 91018210 add x16, x16, #0x60 23ccc: d61f0220 br x17 Disassembly of section .text: 0000000000023d00 <abort@@GLIBC_2.17-0x98>: 23d00: a9bf7bfd stp x29, x30, [sp, #-16]! 23d04: 910003fd mov x29, sp Taking a sample in free@plt is very rare because it is so small, but the test can be forced to fail almost every time on any platform by linking the test with a shared library that has a single empty function and calling it in a loop. The fix is to zero the buffers so that when there is a jump in the addresses output by objdump, zeros are already filled in between. Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20210906152238.3415467-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-27perf test: Fix DWARF unwind for optimized builds.Ian Rogers
To ensure the stack frames are on the stack tail calls optimizations need to be inhibited. If your compiler supports an attribute use it, otherwise use an asm volatile barrier. The barrier fix was suggested here: https://lore.kernel.org/lkml/20201028081123.GT2628@hirez.programming.kicks-ass.net/ Tested with an optimized clang build and by forcing the asm barrier route with an optimized clang build. A GCC bug tracking a proper disable_tail_calls is: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97831 Fixes: 9ae1e990f1ab ("perf tools: Remove broken __no_tail_call attribute") v2. is a rebase. The original fix patch generated quite a lot of discussion over the right place for the fix: https://lore.kernel.org/lkml/20201114000803.909530-1-irogers@google.com/ The patch reflects my preference of it being near the use, so that future code cleanups don't break this somewhat special usage. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20210922173812.456348-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-27Merge branch 'mv88e6xxx-mtu-fixes'David S. Miller
Andrew Lunn says: ==================== mv88e6xxx: MTU fixes These three patches fix MTU issues reported by 曹煜. There are two different ways of configuring the MTU in the hardware. The 6161 family is using the wrong method. Some of the marvell switch enforce the MTU when the port is used for CPU/DSA, some don't. Because of the extra header, the MTU needs increasing with this overhead. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27dsa: mv88e6xxx: Include tagger overhead when setting MTU for DSA and CPU portsAndrew Lunn
Same members of the Marvell Ethernet switches impose MTU restrictions on ports used for connecting to the CPU or another switch for DSA. If the MTU is set too low, tagged frames will be discarded. Ensure the worst case tagger overhead is included in setting the MTU for DSA and CPU ports. Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 <cao88yu@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27dsa: mv88e6xxx: Fix MTU definitionAndrew Lunn
The MTU passed to the DSA driver is the payload size, typically 1500. However, the switch uses the frame size when applying restrictions. Adjust the MTU with the size of the Ethernet header and the frame checksum. The VLAN header also needs to be included when the frame size it per port, but not when it is global. Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 <cao88yu@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27dsa: mv88e6xxx: 6161: Use chip wide MAX MTUAndrew Lunn
The datasheets suggests the 6161 uses a per port setting for jumbo frames. Testing has however shown this is not correct, it uses the old style chip wide MTU control. Change the ops in the 6161 structure to reflect this. Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 <cao88yu@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: mdiobus: Fix memory leak in __mdiobus_registerYanfei Xu
Once device_register() failed, we should call put_device() to decrement reference count for cleanup. Or it will cause memory leak. BUG: memory leak unreferenced object 0xffff888114032e00 (size 256): comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff ................ 08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff .........ve..... backtrace: [<ffffffff8265cfab>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff8265cfab>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff8265cfab>] device_private_init drivers/base/core.c:3203 [inline] [<ffffffff8265cfab>] device_add+0x89b/0xdf0 drivers/base/core.c:3253 [<ffffffff828dd643>] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537 [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline] [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline] [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969 [<ffffffff82660916>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [<ffffffff8265cd0b>] device_add+0x5fb/0xdf0 drivers/base/core.c:3359 [<ffffffff82c343b9>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170 [<ffffffff82c4473c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 BUG: memory leak unreferenced object 0xffff888116f06900 (size 32): comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s) hex dump (first 32 bytes): 75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00 usb-001:003..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81484516>] kstrdup+0x36/0x70 mm/util.c:60 [<ffffffff814845a3>] kstrdup_const+0x53/0x80 mm/util.c:83 [<ffffffff82296ba2>] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48 [<ffffffff82358d4b>] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289 [<ffffffff826575f3>] dev_set_name+0x63/0x90 drivers/base/core.c:3147 [<ffffffff828dd63b>] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535 [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline] [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline] [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969 Reported-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27Revert "ibmvnic: check failover_pending in login response"Desnes A. Nunes do Rosario
This reverts commit d437f5aa23aa2b7bd07cd44b839d7546cc17166f. Code has been duplicated through commit <273c29e944bd> "ibmvnic: check failover_pending in login response" Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27s390/cio: avoid excessive path-verification requestsVineeth Vijayan
Currently when removing a device from cio_ignore list, we trigger a path-verification for all the subchannels available in the system. This could lead to path-verification requests on subchannels with an online device, which could cause unwanted delay. Instead of all the subchannels, trigger the path-verifications to those without an online device. Reported-by: Julian Wiedmann <jwi@linux.ibm.com> Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-09-27net: bgmac-platform: handle mac-address deferralMatthew Hagan
This patch is a replication of Christian Lamparter's "net: bgmac-bcma: handle deferred probe error due to mac-address" patch for the bgmac-platform driver [1]. As is the case with the bgmac-bcma driver, this change is to cover the scenario where the MAC address cannot yet be discovered due to reliance on an nvmem provider which is yet to be instantiated, resulting in a random address being assigned that has to be manually overridden. [1] https://lore.kernel.org/netdev/20210919115725.29064-1-chunkeey@gmail.com Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: hns: Fix spelling mistake "maped" -> "mapped"Colin Ian King
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27mac80211: Fix Ptk0 rekey documentationAlexander Wetzel
@IEEE80211_KEY_FLAG_GENERATE_IV setting is irrelevant for RX. Move the requirement to the correct section in the PTK0 rekey documentation. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20210924200514.7936-1-alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-27mac80211: check return value of rhashtable_initMichelleJin
When rhashtable_init() fails, it returns -EINVAL. However, since error return value of rhashtable_init is not checked, it can cause use of uninitialized pointers. So, fix unhandled errors of rhashtable_init. Signed-off-by: MichelleJin <shjy180909@gmail.com> Link: https://lore.kernel.org/r/20210927033457.1020967-4-shjy180909@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-27mac80211: fix use-after-free in CCMP/GCMP RXJohannes Berg
When PN checking is done in mac80211, for fragmentation we need to copy the PN to the RX struct so we can later use it to do a comparison, since commit bf30ca922a0c ("mac80211: check defrag PN against current frame"). Unfortunately, in that commit I used the 'hdr' variable without it being necessarily valid, so use-after-free could occur if it was necessary to reallocate (parts of) the frame. Fix this by reloading the variable after the code that results in the reallocations, if any. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401. Cc: stable@vger.kernel.org Fixes: bf30ca922a0c ("mac80211: check defrag PN against current frame") Link: https://lore.kernel.org/r/20210927115838.12b9ac6bb233.I1d066acd5408a662c3b6e828122cd314fcb28cdb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-27drm/i915: Remove warning from the rps workerTejas Upadhyay
In commit 4e5c8a99e1cb ("drm/i915: Drop i915_request.lock requirement for intel_rps_boost()"), we decoupled the rps worker from the pm so that we could avoid the synchronization penalty which makes the assertion liable to run too early. Which makes warning invalid hence removed. Fixes: 4e5c8a99e1cb ("drm/i915: Drop i915_request.lock requirement for intel_rps_boost()") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210914090412.1393498-1-tejaskumarx.surendrakumar.upadhyay@intel.com (cherry picked from commit a837a0686308d95ad9c48d32b4dfe86a17dc98c2) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-27drm/i915/request: fix early tracepointsMatthew Auld
Currently we blow up in trace_dma_fence_init, when calling into get_driver_name or get_timeline_name, since both the engine and context might be NULL(or contain some garbage address) in the case of newly allocated slab objects via the request ctor. Note that we also use SLAB_TYPESAFE_BY_RCU here, which allows requests to be immediately freed, but delay freeing the underlying page by an RCU grace period. With this scheme requests can be re-allocated, at the same time as they are also being read by some lockless RCU lookup mechanism. In the ctor case, which is only called for new slab objects(i.e allocate new page and call the ctor for each object) it's safe to reset the context/engine prior to calling into dma_fence_init, since we can be certain that no one is doing an RCU lookup which might depend on peeking at the engine/context, like in active_engine(), since the object can't yet be externally visible. In the recycled case(which might also be externally visible) the request refcount always transitions from 0->1 after we set the context/engine etc, which should ensure it's valid to dereference the engine for example, when doing an RCU list-walk, so long as we can also increment the refcount first. If the refcount is already zero, then the request is considered complete/released. If it's non-zero, then the request might be in the process of being re-allocated, or potentially still in flight, however after successfully incrementing the refcount, it's possible to carefully inspect the request state, to determine if the request is still what we were looking for. Note that all externally visible requests returned to the cache must have zero refcount. One possible fix then is to move dma_fence_init out from the request ctor. Originally this was how it was done, but it was moved in: commit 855e39e65cfc33a73724f1cc644ffc5754864a20 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Feb 3 09:41:48 2020 +0000 drm/i915: Initialise basic fence before acquiring seqno where it looks like intel_timeline_get_seqno() relied on some of the rq->fence state, but that is no longer the case since: commit 12ca695d2c1ed26b2dcbb528b42813bd0f216cfc Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Tue Mar 23 16:49:50 2021 +0100 drm/i915: Do not share hwsp across contexts any more, v8. intel_timeline_get_seqno() could also be cleaned up slightly by dropping the request argument. Moving dma_fence_init back out of the ctor, should ensure we have enough of the request initialised in case of trace_dma_fence_init. Functionally this should be the same, and is effectively what we were already open coding before, except now we also assign the fence->lock and fence->ops, but since these are invariant for recycled requests(which might be externally visible), and will therefore already hold the same value, it shouldn't matter. An alternative fix, since we don't yet have a fully initialised request when in the ctor, is just setting the context/engine as NULL, but this does require adding some extra handling in get_driver_name etc. v2(Daniel): - Try to make the commit message less confusing Fixes: 855e39e65cfc ("drm/i915: Initialise basic fence before acquiring seqno") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Michael Mason <michael.w.mason@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210921134202.3803151-1-matthew.auld@intel.com (cherry picked from commit be988eaee1cb208c4445db46bc3ceaf75f586f0b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-27drm/i915/guc, docs: Fix pdfdocs build error by removing nested gridAkira Yokosawa
Nested grids in grid-table cells are not specified as proper ReST constructs. Commit 572f2a5cd974 ("drm/i915/guc: Update firmware to v62.0.0") added a couple of kerneldoc tables of the form: +---+-------+------------------------------------------------------+ | 1 | 31:0 | +------------------------------------------------+ | +---+-------+ | | | |...| | | Embedded `HXG Message`_ | | +---+-------+ | | | | n | 31:0 | +------------------------------------------------+ | +---+-------+------------------------------------------------------+ For "make htmldocs", they happen to work as one might expect, but they are incompatible with "make latexdocs" and "make pdfdocs", and cause the generated gpu.tex file to become incomplete and unbuildable by xelatex. Restore the compatibility by removing those nested grids in the tables. Size comparison of generated gpu.tex: Sphinx 2.4.4 Sphinx 4.2.0 v5.14: 3238686 3841631 v5.15-rc1: 376270 432729 with this fix: 3377846 3998095 Fixes: 572f2a5cd974 ("drm/i915/guc: Update firmware to v62.0.0") Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4a227569-074f-c501-58bb-d0d8f60a8ae9@gmail.com (cherry picked from commit 017792a041183c4f5ec595f386e76a40ed728cfc) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-27Merge tag 'gvt-fixes-2021-09-18' of https://github.com/intel/gvt-linux into ↵Jani Nikula
drm-intel-fixes gvt-fixes-2021-09-18 - ww locking fix from Zhi Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210918071105.GY14689@zhen-hp.sh.intel.com
2021-09-27HID: amd_sfh: Fix potential NULL pointer dereferenceBasavaraj Natikar
The cl_data field of a privdata must be allocated and updated before using in amd_sfh_hid_client_init() function. Hence handling NULL pointer cl_data accordingly. Fixes: d46ef750ed58 ("HID: amd_sfh: Fix potential NULL pointer dereference") Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-09-26ksmbd: fix invalid request buffer access in compoundNamjae Jeon
Ronnie reported invalid request buffer access in chained command when inserting garbage value to NextCommand of compound request. This patch add validation check to avoid this issue. Cc: Tom Talpey <tom@talpey.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Ralph Böhme <slow@samba.org> Tested-by: Steve French <smfrench@gmail.com> Reviewed-by: Steve French <smfrench@gmail.com> Acked-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-09-26ksmbd: remove RFC1002 check in smb2 requestRonnie Sahlberg
In smb_common.c you have this function : ksmbd_smb_request() which is called from connection.c once you have read the initial 4 bytes for the next length+smb2 blob. It checks the first byte of this 4 byte preamble for valid values, i.e. a NETBIOSoverTCP SESSION_MESSAGE or a SESSION_KEEP_ALIVE. We don't need to check this for ksmbd since it only implements SMB2 over TCP port 445. The netbios stuff was only used in very old servers when SMB ran over TCP port 139. Now that we run over TCP port 445, this is actually not a NB header anymore and you can just treat it as a 4 byte length field that must be less than 16Mbyte. and remove the references to the RFC1002 constants that no longer applies. Cc: Tom Talpey <tom@talpey.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Ralph Böhme <slow@samba.org> Cc: Steve French <smfrench@gmail.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-09-26Linux 5.15-rc3v5.15-rc3Linus Torvalds
2021-09-26Merge tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull ksmbd fixes from Steve French: "Five fixes for the ksmbd kernel server, including three security fixes: - remove follow symlinks support - use LOOKUP_BENEATH to prevent out of share access - SMB3 compounding security fix - fix for returning the default streams correctly, fixing a bug when writing ppt or doc files from some clients - logging more clearly that ksmbd is experimental (at module load time)" * tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: use LOOKUP_BENEATH to prevent the out of share access ksmbd: remove follow symlinks support ksmbd: check protocol id in ksmbd_verify_smb_message() ksmbd: add default data stream name in FILE_STREAM_INFORMATION ksmbd: log that server is experimental at module load
2021-09-26Merge tag 'edac_urgent_for_v5.15_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fixes from Borislav Petkov: "Fix two EDAC drivers using the wrong value type for the DIMM mode" * tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/dmc520: Assign the proper type to dimm->edac_mode EDAC/synopsys: Fix wrong value type assignment for edac_mode
2021-09-26Merge tag 'thermal-v5.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fixes from Daniel Lezcano: - Fix thermal shutdown after a suspend/resume due to a wrong TCC value restored on Intel platform (Antoine Tenart) - Fix potential buffer overflow when building the list of policies. The buffer size is not updated after writing to it (Dan Carpenter) - Fix wrong check against IS_ERR instead of NULL (Ansuel Smith) * tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/tsens: Fix wrong check for tzd in irq handlers thermal/core: Potential buffer overflow in thermal_build_list_of_policies() thermal/drivers/int340x: Do not set a wrong tcc offset on resume
2021-09-26Merge tag 'x86-urgent-2021-09-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for X86: - Prevent sending the wrong signal when protection keys are enabled and the kernel handles a fault in the vsyscall emulation. - Invoke early_reserve_memory() before invoking e820_memory_setup() which is required to make the Xen dom0 e820 hooks work correctly. - Use the correct data type for the SETZ operand in the EMQCMDS instruction wrapper. - Prevent undefined behaviour to the potential unaligned accesss in the instruction decoder library" * tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses x86/asm: Fix SETZ size enqcmds() build failure x86/setup: Call early_reserve_memory() earlier x86/fault: Fix wrong signal when vsyscall fails with pkey
2021-09-26Merge tag 'timers-urgent-2021-09-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix for the recently introduced regression in posix CPU timers which failed to stop the timer when requested. That caused unexpected signals to be sent to the process/thread causing malfunction" * tag 'timers-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Prevent spuriously armed 0-value itimer
2021-09-26Merge tag 'irq-urgent-2021-09-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for interrupt chip drivers: - Work around a bad GIC integration on a Renesas platform which can't handle byte-sized MMIO access - Plug a potential memory leak in the GICv4 driver - Fix a regression in the Armada 370-XP IPI code which was caused by issuing EOI instack of ACK. - A couple of small fixes here and there" * tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic: Work around broken Renesas integration irqchip/renesas-rza1: Use semicolons instead of commas irqchip/gic-v3-its: Fix potential VPE leak on error irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build irqchip/mbigen: Repair non-kernel-doc notation irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent irqchip/armada-370-xp: Fix ack/eoi breakage Documentation: Fix irq-domain.rst build warning
2021-09-26net: prevent user from passing illegal stab size王贇
We observed below report when playing with netlink sock: UBSAN: shift-out-of-bounds in net/sched/sch_api.c:580:10 shift exponent 249 is too large for 32-bit type CPU: 0 PID: 685 Comm: a.out Not tainted Call Trace: dump_stack_lvl+0x8d/0xcf ubsan_epilogue+0xa/0x4e __ubsan_handle_shift_out_of_bounds+0x161/0x182 __qdisc_calculate_pkt_len+0xf0/0x190 __dev_queue_xmit+0x2ed/0x15b0 it seems like kernel won't check the stab log value passing from user, and will use the insane value later to calculate pkt_len. This patch just add a check on the size/cell_log to avoid insane calculation. Reported-by: Abaci <abaci@linux.alibaba.com> Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-25Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "16 patches. Subsystems affected by this patch series: xtensa, sh, ocfs2, scripts, lib, and mm (memory-failure, kasan, damon, shmem, tools, pagecache, debug, and pagemap)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: fix uninitialized use in overcommit_policy_handler mm/memory_failure: fix the missing pte_unmap() call kasan: always respect CONFIG_KASAN_STACK sh: pgtable-3level: fix cast to pointer from integer of different size mm/debug: sync up latest migrate_reason to migrate_reason_names mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN mm: fs: invalidate bh_lrus for only cold path lib/zlib_inflate/inffast: check config in C to avoid unused function warning tools/vm/page-types: remove dependency on opt_file for idle page tracking scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' error ocfs2: drop acl cache for directories too mm/shmem.c: fix judgment error in shmem_is_huge() xtensa: increase size of gcc stack frame check mm/damon: don't use strnlen() with known-bogus source length kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()
2021-09-25Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Thirty-three fixes, I'm afraid. Essentially the build up from the last couple of weeks while I've been dealling with Linux Plumbers conference infrastructure issues. It's mostly the usual assortment of spelling fixes and minor corrections. The only core relevant changes are to the sd driver to reduce the spin up message spew and fix a small memory leak on the freeing path" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (33 commits) scsi: ses: Retry failed Send/Receive Diagnostic commands scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT" scsi: lpfc: Fix gcc -Wstringop-overread warning, again scsi: lpfc: Use correct scnprintf() limit scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn() scsi: core: Remove 'current_tag' scsi: acornscsi: Remove tagged queuing vestiges scsi: fas216: Kill scmd->tag scsi: qla2xxx: Restore initiator in dual mode scsi: ufs: core: Unbreak the reset handler scsi: sd_zbc: Support disks with more than 2**32 logical blocks scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling" scsi: bsg: Fix device unregistration scsi: sd: Make sd_spinup_disk() less noisy scsi: ufs: ufs-pci: Fix Intel LKF link stability scsi: mpt3sas: Clean up some inconsistent indenting scsi: megaraid: Clean up some inconsistent indenting scsi: sr: Fix spelling mistake "does'nt" -> "doesn't" scsi: Remove SCSI CDROM MAINTAINERS entry scsi: megaraid: Fix Coccinelle warning ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 20:16:32 +0000