Age | Commit message (Collapse) | Author |
|
Currently DSC flushing happens during interface configuration at
dpu_hw_ctl_intf_cfg_v1(). Separate DSC flush away from
dpu_hw_ctl_intf_cfg_v1() by adding dpu_hw_ctl_update_pending_flush_dsc_v1()
to handle both per-DSC engine and DSC flush bits at same time to make it
consistent with the location of flush programming of other DPU sub-blocks.
Changes in v10:
-- rewording commit text
-- pass ctl directly instead of dpu_enc to dsc_pipe_cfg()
-- ctx->pending_dsc_flush_mask = 0;
Changes in v11:
-- add Fixes tag
Changes in v12:
-- move dsc parameter to next line at dpu_encoder_dsc_pipe_cfg()
Changes in v14:
-- Fixes tag had been move to 1st patch of this series
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539506/
Link: https://lore.kernel.org/r/1685036458-22683-9-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
There are two tiers of pending flush control, top level and
individual hardware block. Currently only the top level of
flush mask is reset to 0 but the individual pending flush masks
of particular hardware blocks are left at their previous values,
eventually accumulating all possible bit values and typically
flushing more than necessary.
Reset all individual hardware block flush masks to 0 to avoid
accidentally flushing them.
Changes in V13:
-- rewording commit text
-- add an empty space line as suggested
Changes in V14:
-- add Fixes tag
Fixes: 73bfb790ac78 ("msm:disp:dpu1: setup display datapath for SC7180 target")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539508/
Link: https://lore.kernel.org/r/1685036458-22683-8-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Disabling the crossbar mux between DSC and PINGPONG currently
requires a bogus enum dpu_pingpong value to be passed when calling
dsc_bind_pingpong_blk() with enable=false, even though the register
value written is independent of the current PINGPONG block. Replace
that `bool enable` parameter with a new PINGPONG_NONE dpu_pingpong
flag that triggers the write of the "special" 0xF "crossbar
disabled" value to the register instead.
Changes in v4:
-- more details to commit text
Changes in v5:
-- rewording commit text suggested by Marijn
-- add DRM_DEBUG_KMS for DSC unbinding case
Changes in v8:
-- fix checkpatch warning
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539505/
Link: https://lore.kernel.org/r/1685036458-22683-6-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
DPU < 7.0.0 has DPU_PINGPONG_DSC feature bit set to indicate it requires
both dpu_hw_pp_setup_dsc() and dpu_hw_pp_dsc_{enable,disable}() to be
executed to complete DSC configuration if DSC hardware block is present.
Hence test DPU_PINGPONG_DSC feature bit and assign DSC related functions
to the ops of PINGPONG block accordingly if DPU_PINGPONG_DSC bit is set.
Changes in v6:
-- split patches, this patch has function handles DPU_PINGPONG_DSC bit
Changes in v9:
-- the original code of assigning dsc related functions to the ops of
pingpong block without testing the DPU_PINGPONG_DSC feature bit was
restored back due to rebase error which defeat the purpose of this
patch. Remove those error code.
Changes in v10:
-- change commit title
-- correct texts at changes in v9
Changes in v12:
-- fixed length too long at Changes in v9
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539504/
Link: https://lore.kernel.org/r/1685036458-22683-5-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
DPU < 7.0.0 requires the PINGPONG block to be involved during
DSC setting up. Since DPU >= 7.0.0, enabling and starting the DSC
encoder engine was moved to INTF with the help of the flush mechanism.
Add a DPU_PINGPONG_DSC feature bit to restrict the availability of
dpu_hw_pp_setup_dsc() and dpu_hw_pp_dsc_{enable,disable}() on the
PINGPONG block to DPU < 7.0.0 hardware, as the registers are not
available on DPU 7.0.0 and higher anymore.
Add DPU_PINGPONG_DSC to PINGPONG_SDM845_MASK, PINGPONG_SDM845_TE2_MASK
and PINGPONG_SM8150_MASK which is used for all DPU < 7.0 chipsets.
changes in v6:
-- split patches and rearrange to keep catalog related files at this patch
changes in v7:
-- rewording commit text as suggested at review comments
changes in v9:
-- delete BIT(DPU_PINGPONG_DSC) from PINGPONG_SDM845_TE2_MASK
changes in v10:
-- correct order of commit text
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539502/
Link: https://lore.kernel.org/r/1685036458-22683-4-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The CTL_FLUSH register should be programmed with the 22th bit
(DSC_IDX) to flush the DSC hardware blocks, not the literal value of
22 (which corresponds to flushing VIG1, VIG2 and RGB1 instead).
Changes in V12:
-- split this patch out of "separate DSC flush update out of interface"
Changes in V13:
-- rewording the commit text
Changes in V14:
-- drop 'DSC" from "The DSC CTL_FLUSH register" at commit text
Fixes: 77f6da90487c ("drm/msm/disp/dpu1: Add DSC support in hw_ctl")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539496/
Link: https://lore.kernel.org/r/1685036458-22683-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The fbdev framebuffer is in system memory. Store the address in
the field 'screen_buffer'. Fixes the following sparse warning.
../drivers/gpu/drm/msm/msm_fbdev.c:124:26: warning: incorrect type in assignment (different address spaces)
../drivers/gpu/drm/msm/msm_fbdev.c:124:26: expected char [noderef] __iomem *screen_base
../drivers/gpu/drm/msm/msm_fbdev.c:124:26: got void *
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/538531/
Link: https://lore.kernel.org/r/20230522191701.13406-1-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
This define is used only in one place, in dpu_encoder debugfs code.
Inline the value and drop the define completely.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/538303/
Link: https://lore.kernel.org/r/20230521192230.9747-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
This callback has been unused since the driver being added. Drop it now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/538302/
Link: https://lore.kernel.org/r/20230521192230.9747-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Simplify calculations around pixel_clk_rate division. Replace common
pattern of doing 64-bit multiplication and then a do_div() call with
simpler mult_frac() invocation.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/538273/
Link: https://lore.kernel.org/r/20230520200103.4019607-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
In dsi_calc_clk_rate_v2() there is no need to call dsi_get_pclk_rate().
This function has just been called (from dsi_calc_pclk()) and its
result is stored at msm_host->pixel_clk_rate. Use this variable
directly.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/538272/
Link: https://lore.kernel.org/r/20230520200103.4019607-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Rework SSPP and WB code to use common helper for programming QoS
settings.
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537912/
Link: https://lore.kernel.org/r/20230518222238.3815293-10-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Now as the struct dpu_hw_pipe_qos_cfg consists of only one bool field,
drop the structure and use corresponding bool directly.
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537918/
Link: https://lore.kernel.org/r/20230518222238.3815293-9-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
This flag is always passed to _dpu_plane_set_qos_ctrl(), so drop it and
remove corresponding conditions from the mentioned function.
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537916/
Link: https://lore.kernel.org/r/20230518222238.3815293-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
After removal of DPU_PLANE_QOS_VBLANK_CTRL, several fields of struct
dpu_hw_pipe_qos_cfg are fixed to false/0. Drop them from the structure
(and drop the corresponding code from the functions).
The DPU_PLANE_QOS_VBLANK_AMORTIZE flag is also removed, since it is now
a NOP.
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537909/
Link: https://lore.kernel.org/r/20230518222238.3815293-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Drop support for DPU_PLANE_QOS_VBLANK_CTRL flag. It is not used both
in upstream driver and in vendor SDE driver.
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537907/
Link: https://lore.kernel.org/r/20230518222238.3815293-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Slightly rearrainge code in dpu_plane_sspp_update_pipe() to group
QoS/LUT related functions.
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537906/
Link: https://lore.kernel.org/r/20230518222238.3815293-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The function dpu_plane_sspp_update_pipe() contains code to skip enabling
the QoS and OT limitis for CURSOR pipes. However all DPU since sdm845
repurpose DMA SSPP for the cursor planes because they lack the real
CURSOR SSPP. Fix the condition to actually check that the plane is
CURSOR or not.
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537911/
Link: https://lore.kernel.org/r/20230518222238.3815293-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Get rid of intermediatory configuration structure and defines. Pass the
format and the enablement bit directly to the new helper. The
WB_CDP_CNTL register ignores BIT(2), so we can write it for both SSPP
and WB CDP settings.
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537910/
Link: https://lore.kernel.org/r/20230518222238.3815293-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Reorder SSPP register definitions to sort them in the ascending order.
Move register bitfields after the register definitions.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/537903/
Link: https://lore.kernel.org/r/20230518222238.3815293-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use dma-fence-unwrap API for waiting each dma-fence of the in-fence array
individually. Sync file's in-fence array always has a non-matching fence
context ID, which doesn't allow to skip waiting of fences with a matching
context ID in a case of a merged sync file fence.
Suggested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230416115237.798604-3-dmitry.osipenko@collabora.com
|
|
Move virtio_gpu_execbuffer_ioctl() into separate virtgpu_submit.c file,
refactoring and optimizing the code along the way to ease addition of new
features to the ioctl.
The optimization is done by using optimal ordering of the job's submission
steps, reducing code path from the start of the ioctl to the point of
pushing job to virtio queue. Job's initialization is now performed before
in-fence is awaited and out-fence setup is made after sending out job to
virtio.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230416115237.798604-2-dmitry.osipenko@collabora.com
|
|
According to Bspec, the voltage level for 480MHz is to be set as 1
instead of 2.
BSpec: 49208
Fixes: 06f1b06dc5b7 ("drm/i915/display: Add 480 MHz CDCLK steps for RPL-U")
v2: rebase
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529060747.3972259-1-chaitanya.kumar.borah@intel.com
|
|
Carl and Pranjal have been reviewing the QAIC patches. List them as
reviewers so that they are copied on all developments which will make
it easier for them to continue reviewing QAIC patches.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Carl Vanderlip <quic_carlv@quicinc.com>
Acked-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523161421.11017-1-quic_jhugo@quicinc.com
|
|
When intel_dp_init_connector fails, some power wells used in dp aux
communication may not be completely disabled yet. This may result in a
null pointer dereference when icl_aux_pw_to_phy() is called from
icl_combo_phy_aux_power_well_disable() after the encoder and connector
are already freed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221222201804.1380963-1-maarten.lankhorst@linux.intel.com
|
|
enum i915_drm_suspend_mode suspend_mode is only used in
intel_display_power, while we only care about whether we perform a
s2idle. Remove it and use a simple bool.
v2: Rebase
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # v1
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529105900.1942814-1-jani.nikula@intel.com
|
|
'rbiter' -> 'arbiter'
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529112956.2083389-1-suijingfeng@loongson.cn
|
|
I've been using that email address for contributions for a while but it
seems I never added it to mailmap.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531133724.133872-1-maxime@cerno.tech
|
|
When building ARCH=i386 allmodconfig, the following warning occurs:
In file included from include/linux/device.h:15,
from include/linux/node.h:18,
from include/linux/cpu.h:17,
from include/linux/static_call.h:135,
from arch/x86/include/asm/perf_event.h:5,
from include/linux/perf_event.h:25,
from drivers/gpu/drm/i915/i915_pmu.h:11,
from drivers/gpu/drm/i915/gt/intel_engine_types.h:21,
from drivers/gpu/drm/i915/gt/intel_context_types.h:18,
from drivers/gpu/drm/i915/gem/i915_gem_context_types.h:20,
from drivers/gpu/drm/i915/i915_request.h:34,
from drivers/gpu/drm/i915/i915_active.h:13,
from drivers/gpu/drm/i915/gt/intel_context.h:13,
from drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c:8:
drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c: In function 'gsccs_send_message':
include/drm/drm_print.h:456:39: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
456 | dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__)
| ^~~~~~~~
include/linux/dev_printk.h:110:30: note: in definition of macro 'dev_printk_index_wrap'
110 | _p_func(dev, fmt, ##__VA_ARGS__); \
| ^~~
include/linux/dev_printk.h:146:61: note: in expansion of macro 'dev_fmt'
146 | dev_printk_index_wrap(_dev_warn, KERN_WARNING, dev, dev_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~
include/drm/drm_print.h:456:9: note: in expansion of macro 'dev_warn'
456 | dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__)
| ^~~~
include/drm/drm_print.h:466:9: note: in expansion of macro '__drm_printk'
466 | __drm_printk((drm), warn,, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~
drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c:146:17: note: in expansion of macro 'drm_warn'
146 | drm_warn(&i915->drm, "caller with insufficient PXP reply size %u (%ld)\n",
| ^~~~~~~~
cc1: all warnings being treated as errors
Use the '%zu' format specifier, as the variable is a 'size_t'.
Fixes: dc9ac125d81f ("drm/i915/pxp: Add GSC-CS backend to send GSC fw messages")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530-i915-pxp-size_t-wformat-v1-1-9631081e2e5b@kernel.org
|
|
Without this header, the use of FIELD_PREP() can cause a build failure:
drivers/gpu/drm/meson/meson_venc.c: In function 'meson_encl_set_gamma_table':
drivers/gpu/drm/meson/meson_venc.c:1595:24: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration]
Fixes: 51fc01a03442c ("drm/meson: venc: add ENCL encoder setup for MIPI-DSI output")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602124539.894888-1-arnd@kernel.org
|
|
./drivers/gpu/drm/meson/meson_dw_mipi_dsi.c:117:2-3: Unneeded semicolon
./drivers/gpu/drm/meson/meson_dw_mipi_dsi.c:231:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5392
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602091416.107850-1-yang.lee@linux.alibaba.com
|
|
In case system is short on mappable memory (256MB on SmallBar) allocation
of two 1GB buffers will fail.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8300
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230601144450.792228-1-andrzej.hajda@intel.com
|
|
Convert the remaining uses of struct edid based drm_get_edid(),
drm_connector_update_edid_property() and drm_add_edid_modes() calls to
the struct drm_edid based drm_edid_read_ddc(),
drm_edid_connector_update() and drm_edid_connector_add_modes().
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b1b53bb9004adaa402e061f7df2caf0eb4723a43.1685437501.git.jani.nikula@intel.com
|
|
Convert the topology manager to use struct drm_edid, add
drm_dp_mst_edid_read() that returns drm_edid, and rewrite the old
drm_dp_mst_get_edid() to use it.
Note that the old drm_get_edid() ended up calling
drm_connector_update_edid_property(). This responsibility is now
deferred to drivers, which all do it anyway after calling
drm_dp_mst_edid_read() or drm_dp_mst_get_edid().
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c32e5c241934093fc4144eed4c01155e1f03af1.1685437501.git.jani.nikula@intel.com
|
|
It's a bit tedious to check for NULL before calling
drm_edid_duplicate(). Make it handle NULL parameter graciously.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ae8923d39a5abd0260fdf7f9cc54c5e046e70d3.1685437501.git.jani.nikula@intel.com
|
|
Use drm_edid_read_switcheroo() to switch from struct edid to struct
drm_edid.
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/429cd6f23366cb4cace4fa13cf92ad068aca64dd.1685437501.git.jani.nikula@intel.com
|
|
Add a switcheroo variant to the struct drm_edid based EDID read
functions.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4ab5ec994670ea50f95c8079c1f1ae915940b00f.1685437501.git.jani.nikula@intel.com
|
|
Use the information stored in display info.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e02f2f7381dfcee6e4160a5fc17aea6ff04baf9.1685437500.git.jani.nikula@intel.com
|
|
Use the information stored in display info.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3e9e1dcd554d470bdf474891a431b15e1880f9a0.1685437500.git.jani.nikula@intel.com
|
|
Use the information stored in display info.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5cdb4731260b062c0f0ad2f8b64195c9a57bcb76.1685437500.git.jani.nikula@intel.com
|
|
Use the information stored in display info.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/710286536d6b07ba8aa068b65b2b2c0c7743220e.1685437500.git.jani.nikula@intel.com
|
|
Use the information stored in display info. Add intel_dp_has_hdmi_sink()
helper to access it.
v2: Rebased
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/748103fda572b3552e5bbdafb300d8508d4eeaf4.1685437500.git.jani.nikula@intel.com
|
|
Use the information stored in display info.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/695bbe8b5ebee6e492f95a1c818da15691752dc8.1685437500.git.jani.nikula@intel.com
|
|
Caching the has_audio in struct drm_dp_mst_port seems odd, and oddly
placed. Defer audio handling to drivers, and use the info from the
connector display info. i915 was the only one using it anyway.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7d9eefdf150870479c5797f027d4c2b0a19ff583.1685437500.git.jani.nikula@intel.com
|
|
Since we already iterate everything that's needed for determining audio,
reduce the need to call drm_detect_monitor_audio() by storing has_audio
to connector info.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/391a93b25c6bcbb39854aaa2813570cfb1580ed9.1685437500.git.jani.nikula@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.5:
UAPI Changes:
Cross-subsystem Changes:
* fbdev:
* Add Kconfig options and initializer macros for file I/O, convert
DRM fbdev emulation
Core Changes:
* Unify handling of struct file_operations.show_fdinfo
* Use .probe in all i2c code (interface cleanup)
* TTM:
* Remove unused code
Driver Changes:
* amdgpu:
* Use shared show_fdinfo code
* Fix building without procfs
* bridge:
* display-conenctor: Add support for external power supply
* samsung-dsim: Fix enabling; Support variable clocking
* tc358767: Fixes
* ti-sn65dsi83: Fix enabling
* msm:
* Use shared show_fdinfo code
* msxfb:
* Add support for i.MX93 LCDIF
* panel:
* Add support for Ampire AM-800480L1TMQW-T00H plus DT bindings
* panel-edp: Convert .remove to return void
* stm:
* dsi: Use devm_ helper
* ltdc: Fix potential invalid pointer deref
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230601112246.GA10882@linux-uq9g
|
|
When building with clang's -Wincompatible-function-pointer-types-strict,
the following warnings occur:
drivers/gpu/drm/i915/gt/intel_ggtt_gmch.c:102:23: error: incompatible function pointer types assigning to 'void (*)(struct i915_address_space *, dma_addr_t, u64, unsigned int, u32)' (aka 'void (*)(struct i915_address_space *, unsigned int, unsigned long long, unsigned int, unsigned int)') from 'void (struct i915_address_space *, dma_addr_t, u64, enum i915_cache_level, u32)' (aka 'void (struct i915_address_space *, unsigned int, unsigned long long, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
ggtt->vm.insert_page = gmch_ggtt_insert_page;
^ ~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_ggtt_gmch.c:103:26: error: incompatible function pointer types assigning to 'void (*)(struct i915_address_space *, struct i915_vma_resource *, unsigned int, u32)' (aka 'void (*)(struct i915_address_space *, struct i915_vma_resource *, unsigned int, unsigned int)') from 'void (struct i915_address_space *, struct i915_vma_resource *, enum i915_cache_level, u32)' (aka 'void (struct i915_address_space *, struct i915_vma_resource *, enum i915_cache_level, unsigned int)') [-Werror, -Wincompatible-function-pointer-types-strict]
ggtt->vm.insert_entries = gmch_ggtt_insert_entries;
^ ~~~~~~~~~~~~~~~~~~~~~~~~
2 errors generated.
The warning is pointing out that while 'enum i915_cache_level' and
'unsigned int' are ABI compatible, these indirect calls will fail
clang's kernel Control Flow Integrity (kCFI) checks, as the callback's
signature does not exactly match the prototype's signature.
To fix this, replace the cache_level parameter with pat_index, as was
done in other places within i915 where there is no difference between
cache_level and pat_index on certain generations.
Fixes: 9275277d5324 ("drm/i915: use pat_index instead of cache_level")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530-i915-gt-cache_level-wincompatible-function-pointer-types-strict-v1-2-54501d598229@kernel.org
|
|
When booting a kernel compiled with CONFIG_CFI_CLANG (kCFI), there is a
CFI failure in ggtt_probe_common() when trying to call hsw_pte_encode()
via an indirect call:
[ 5.030027] CFI failure at ggtt_probe_common+0xd1/0x130 [i915] (target: hsw_pte_encode+0x0/0x30 [i915]; expected type: 0xf5c1d0fc)
With kCFI, indirect calls are validated against their expected type
versus actual type and failures occur when the two types do not match.
clang's -Wincompatible-function-pointer-types-strict can catch this at
compile time but it is not enabled for the kernel yet:
drivers/gpu/drm/i915/gt/intel_ggtt.c:1155:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t,
enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
ggtt->vm.pte_encode = iris_pte_encode;
^ ~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_ggtt.c:1157:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t,
enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
ggtt->vm.pte_encode = hsw_pte_encode;
^ ~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_ggtt.c:1159:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t,
enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
ggtt->vm.pte_encode = byt_pte_encode;
^ ~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_ggtt.c:1161:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t,
enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
ggtt->vm.pte_encode = ivb_pte_encode;
^ ~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_ggtt.c:1163:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t,
enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
ggtt->vm.pte_encode = snb_pte_encode;
^ ~~~~~~~~~~~~~~
5 errors generated.
In this case, the pre-gen8 pte_encode functions have a second parameter
type of 'enum i915_cache_level' whereas the function pointer prototype
in 'struct i915_address_space' expects a second parameter type of
'unsigned int'.
Update the second parameter of the callbacks and the comment above them
noting that these statements are still valid, which matches other
functions and files, to clear up the kCFI failures at run time.
Fixes: 9275277d5324 ("drm/i915: use pat_index instead of cache_level")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530-i915-gt-cache_level-wincompatible-function-pointer-types-strict-v1-1-54501d598229@kernel.org
|
|
kernel_context() returns an error pointer. Use pointer-error
conversion functions to evaluate its return value, rather than
checking for a '0' return.
Fixes: eb5c10cbbc2f ("drm/i915: Remove I915_USER_PRIORITY_SHIFT")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v5.13+
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526124138.2006110-1-andi.shyti@linux.intel.com
|
|
The Starry-ili9882 is a 10.51" WUXGA TFT panel. which fits in nicely with
the existing panel-boe-tv101wum-nl6 driver. From the datasheet,MIPI need
to keep the LP11 state before the lcm_reset pin is pulled high. So add
lp11_before_reset flag.
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525093151.2338370-5-yangcong5@huaqin.corp-partner.google.com
|