| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"Five hotfixes - three for nilfs2, two for MM. For are cc:stable, one
is not"
* tag 'mm-hotfixes-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix leak of nilfs_root in case of writer thread creation failure
nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level()
nilfs2: fix use-after-free bug of struct nilfs_root
mm/damon/core: initialize damon_target->list in damon_new_target()
mm/hugetlb: fix races when looking up a CONT-PTE/PMD size hugetlb page
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- hfs and hfsplus kmap API modernization (Fabio Francesco)
- make crash-kexec work properly when invoked from an NMI-time panic
(Valentin Schneider)
- ntfs bugfixes (Hawkins Jiawei)
- improve IPC msg scalability by replacing atomic_t's with percpu
counters (Jiebin Sun)
- nilfs2 cleanups (Minghao Chi)
- lots of other single patches all over the tree!
* tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype
proc: test how it holds up with mapping'less process
mailmap: update Frank Rowand email address
ia64: mca: use strscpy() is more robust and safer
init/Kconfig: fix unmet direct dependencies
ia64: update config files
nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
fork: remove duplicate included header files
init/main.c: remove unnecessary (void*) conversions
proc: mark more files as permanent
nilfs2: remove the unneeded result variable
nilfs2: delete unnecessary checks before brelse()
checkpatch: warn for non-standard fixes tag style
usr/gen_init_cpio.c: remove unnecessary -1 values from int file
ipc/msg: mitigate the lock contention with percpu counter
percpu: add percpu_counter_add_local and percpu_counter_sub_local
fs/ocfs2: fix repeated words in comments
relay: use kvcalloc to alloc page array in relay_alloc_page_array
proc: make config PROC_CHILDREN depend on PROC_FS
fs: uninline inode_maybe_inc_iversion()
...
|
|
The follow commands caused a crash:
# cd /sys/kernel/tracing
# echo 's:open char file[]' > dynamic_events
# echo 'hist:keys=common_pid:file=filename:onchange($file).trace(open,$file)' > events/syscalls/sys_enter_openat/trigger'
# echo 1 > events/synthetic/open/enable
BOOM!
The problem is that the synthetic event field "char file[]" will read
the value given to it as a string without any memory checks to make sure
the address is valid. The above example will pass in the user space
address and the sythetic event code will happily call strlen() on it
and then strscpy() where either one will cause an oops when accessing
user space addresses.
Use the helper functions from trace_kprobe and trace_eprobe that can
read strings safely (and actually succeed when the address is from user
space and the memory is mapped in).
Now the above can show:
packagekitd-1721 [000] ...2. 104.597170: open: file=/usr/lib/rpm/fileattrs/cmake.attr
in:imjournal-978 [006] ...2. 104.599642: open: file=/var/lib/rsyslog/imjournal.state.tmp
packagekitd-1721 [000] ...2. 104.626308: open: file=/usr/lib/rpm/fileattrs/debuginfo.attr
Link: https://lkml.kernel.org/r/20221012104534.826549315@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Have the specific functions for kernel probes that read strings to inject
the "(fault)" name directly. trace_probes.c does this too (for uprobes)
but as the code to read strings are going to be used by synthetic events
(and perhaps other utilities), it simplifies the code by making sure those
other uses do not need to implement the "(fault)" name injection as well.
Link: https://lkml.kernel.org/r/20221012104534.644803645@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The functions:
fetch_store_strlen_user()
fetch_store_strlen()
fetch_store_string_user()
fetch_store_string()
are identical in both trace_kprobe.c and trace_eprobe.c. Move them into
a new header file trace_probe_kernel.h to share it. This code will later
be used by the synthetic events as well.
Marked for stable as a fix for a crash in synthetic events requires it.
Link: https://lkml.kernel.org/r/20221012104534.467668078@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Use EXPLICIT_RELOCS (ABIv2.0)
- Use generic BUG() handler
- Refactor TLB/Cache operations
- Add qspinlock support
- Add perf events support
- Add kexec/kdump support
- Add BPF JIT support
- Add ACPI-based laptop driver
- Update the default config file
* tag 'loongarch-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits)
LoongArch: Update Loongson-3 default config file
LoongArch: Add ACPI-based generic laptop driver
LoongArch: Add BPF JIT support
LoongArch: Add some instruction opcodes and formats
LoongArch: Move {signed,unsigned}_imm_check() to inst.h
LoongArch: Add kdump support
LoongArch: Add kexec support
LoongArch: Use generic BUG() handler
LoongArch: Add SysRq-x (TLB Dump) support
LoongArch: Add perf events support
LoongArch: Add qspinlock support
LoongArch: Use TLB for ioremap()
LoongArch: Support access filter to /dev/mem interface
LoongArch: Refactor cache probe and flush methods
LoongArch: mm: Refactor TLB exception handlers
LoongArch: Support R_LARCH_GOT_PC_{LO12,HI20} in modules
LoongArch: Support PC-relative relocations in modules
LoongArch: Define ELF relocation types added in ABIv2.0
LoongArch: Adjust symbol addressing for AS_HAS_EXPLICIT_RELOCS
LoongArch: Add Kconfig option AS_HAS_EXPLICIT_RELOCS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt updates from Thomas Gleixner:
"Core code:
- Provide a generic wrapper which can be utilized in drivers to
handle the problem of force threaded demultiplex interrupts on RT
enabled kernels. This avoids conditionals and horrible quirks in
drivers all over the place
- Fix up affected pinctrl and GPIO drivers to make them cleanly RT
safe
Interrupt drivers:
- A new driver for the FSL MU platform specific MSI implementation
- Make irqchip_init() available for pure ACPI based systems
- Provide a functional DT binding for the Realtek RTL interrupt chip
- The usual DT updates and small code improvements all over the
place"
* tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip: IMX_MU_MSI should depend on ARCH_MXC
irqchip/imx-mu-msi: Fix wrong register offset for 8ulp
irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap
dt-bindings: irqchip: Describe the IMX MU block as a MSI controller
irqchip: Add IMX MU MSI controller driver
dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
irqchip/gic-v3: Fix typo in comment
dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END
platform-msi: Export symbol platform_msi_create_irq_domain()
irqchip/realtek-rtl: use parent interrupts
dt-bindings: interrupt-controller: realtek,rtl-intc: require parents
irqchip/realtek-rtl: use irq_domain_add_linear()
irqchip: Make irqchip_init() usable on pure ACPI systems
bcma: gpio: Use generic_handle_irq_safe()
gpio: mlxbf2: Use generic_handle_irq_safe()
platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe()
ssb: gpio: Use generic_handle_irq_safe()
pinctrl: amd: Use generic_handle_irq_safe()
...
|
|
Add the hubp surface flip handler. This fixes some flip timeout issues.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
|
|
Fix the interrupt order of the charger in the binding example.
Fixes: 76f52f815f1a ("dt-bindings: mfd: Add MediaTek MT6370")
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/fcf4e7e7594070a8698dc0d4b96e031bcaa9b3a3.1665585952.git.chiaen_wu@richtek.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add '$ref' and 'unevaluatedProperties: false' in 'multi-led', and remove
unused 'allOf' property.
Fixes: 440c57dabb45 ("dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator")
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/435f6888ebc20c5abae63eb9cb3a055b60db2ed1.1665050503.git.chiaen_wu@richtek.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.1
- add NVME_QUIRK_BOGUS_NID for Lexar NM760 (Abhijit)
- avoid the deepest sleep state on ZHITAI TiPro5000 SSDs (Xi Ruoyao)
- fix possible hang caused during ctrl deletion (Sagi Grimberg)
- fix possible hang in live ns resize with ANA access (Sagi Grimberg)"
* tag 'nvme-6.1-2022-10-12' of git://git.infradead.org/nvme:
nvme-multipath: fix possible hang in live ns resize with ANA access
nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDs
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760
nvme-tcp: fix possible hang caused during ctrl deletion
nvme-rdma: fix possible hang caused during ctrl deletion
|
|
kernel/trace/ring_buffer.c:895: warning: expecting prototype for ring_buffer_nr_pages_dirty(). Prototype was for ring_buffer_nr_dirty_pages() instead.
kernel/trace/ring_buffer.c:5313: warning: expecting prototype for ring_buffer_reset_cpu(). Prototype was for ring_buffer_reset_online_cpus() instead.
kernel/trace/ring_buffer.c:5382: warning: expecting prototype for rind_buffer_empty(). Prototype was for ring_buffer_empty() instead.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2340
Link: https://lkml.kernel.org/r/20221009020642.12506-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, we have a bug where a simultaneous DROPTAG ioctl and socket
close may race, as we attempt to remove a key from lists twice, and
perform an unref for each removal operation. This may result in a uaf
when we attempt the second unref.
This change fixes the race by making __mctp_key_remove tolerant to being
called on a key that has already been removed from the socket/net lists,
and only performs the unref when we do the actual remove. We also need
to hold the list lock on the ioctl cleanup path.
This fix is based on a bug report and comprehensive analysis from
butt3rflyh4ck <butterflyhuangxx@gmail.com>, found via syzkaller.
Cc: stable@vger.kernel.org
Fixes: 63ed1aab3d40 ("mctp: Add SIOCMCTP{ALLOC,DROP}TAG ioctls for tag control")
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter fixes for net
This series from Phil Sutter for the *net* tree fixes a problem with a change
from the 6.1 development phase: the change to nft_fib should have used
the more recent flowic_l3mdev field. Pointed out by Guillaume Nault.
This also makes the older iptables module follow the same pattern.
Also add selftest case and avoid test failure in nft_fib.sh when the
host environment has set rp_filter=1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If net.ipv4.conf.all.rp_filter is set, it overrides the per-interface
setting and thus defeats the fix from bbe4c0896d250 ("selftests:
netfilter: disable rp_filter on router"). Unset it as well to cover that
case.
Fixes: bbe4c0896d250 ("selftests: netfilter: disable rp_filter on router")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Use the introduced field for correct operation with VRF devices instead
of conditionally overwriting flowic_oif. This is a partial revert of
commit b575b24b8eee3 ("netfilter: Fix rpfilter dropping vrf packets by
mistake"), implementing a simpler solution.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Test reverse path (filter) matches in iptables, ip6tables and nftables.
Both with a regular interface and a VRF.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
When ftrace bug happened, following log shows every hex data in
problematic ip address:
actual: ffffffe8:6b:ffffffd9:01:21
But so many 'f's seem a little confusing, and that is because format
'%x' being used to print signed chars in array 'ins'. As suggested
by Joe, change to use format "%*phC" to print array 'ins'.
After this patch, the log is like:
actual: e8:6b:d9:01:21
Link: https://lkml.kernel.org/r/20221011120352.1878494-1-zhengyejian1@huawei.com
Fixes: 6c14133d2d3f ("ftrace: Do not blindly read the ip address in ftrace_bug()")
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When we revalidate paths as part of ns size change (as of commit
e7d65803e2bb), it is possible that during the path revalidation, the
only paths that is IO capable (i.e. optimized/non-optimized) are the
ones that ns resize was not yet informed to the host, which will cause
inflight requests to be requeued (as we have available paths but none
are IO capable). These requests on the requeue list are waiting for
someone to resubmit them at some point.
The IO capable paths will eventually notify the ns resize change to the
host, but there is nothing that will kick the requeue list to resubmit
the queued requests.
Fix this by always kicking the requeue list, and if no IO capable path
exists, these requests will be queued again.
A typical log that indicates that IOs are requeued:
--
nvme nvme1: creating 4 I/O queues.
nvme nvme1: new ctrl: "testnqn1"
nvme nvme2: creating 4 I/O queues.
nvme nvme2: mapped 4/0/0 default/read/poll queues.
nvme nvme2: new ctrl: NQN "testnqn1", addr 127.0.0.1:8009
nvme nvme1: rescanning namespaces.
nvme1n1: detected capacity change from 2097152 to 4194304
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
nvme nvme2: rescanning namespaces.
--
Reported-by: Yogev Cohen <yogev@lightbitslabs.com>
Fixes: e7d65803e2bb ("nvme-multipath: revalidate paths during rescan")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
ZHITAI TiPro5000 SSDs has the same APST sleep problem as its cousin,
TiPro7000. The quirk for TiPro7000 has been added in
commit 6b961bce50e4 ("nvme-pci: avoid the deepest sleep state on
ZHITAI TiPro7000 SSDs"), use the same quirk for TiPro5000.
The ASPT data from "nvme id-ctrl /dev/nvme1":
vid : 0x1e49
ssvid : 0x1e49
sn : ZTA21T0KA2227304LM
mn : ZHITAI TiPlus5000 1TB
fr : ZTA09139
[...]
ps 0 : mp:6.50W operational enlat:0 exlat:0 rrt:0 rrl:0
rwt:0 rwl:0 idle_power:- active_power:-
ps 1 : mp:5.80W operational enlat:0 exlat:0 rrt:1 rrl:1
rwt:1 rwl:1 idle_power:- active_power:-
ps 2 : mp:3.60W operational enlat:0 exlat:0 rrt:2 rrl:2
rwt:2 rwl:2 idle_power:- active_power:-
ps 3 : mp:0.0500W non-operational enlat:5000 exlat:10000 rrt:3 rrl:3
rwt:3 rwl:3 idle_power:- active_power:-
ps 4 : mp:0.0025W non-operational enlat:8000 exlat:45000 rrt:4 rrl:4
rwt:4 rwl:4 idle_power:- active_power:-
Reported-and-tested-by: Chang Feng <flukehn@gmail.com>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add a quirk to fix Lexar NM760 SSD drives reporting duplicate nsids.
Signed-off-by: Abhijit <abhijit@abhijittomar.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When we delete a controller, we execute the following:
1. nvme_stop_ctrl() - stop some work elements that may be
inflight or scheduled (specifically also .stop_ctrl
which cancels ctrl error recovery work)
2. nvme_remove_namespaces() - which first flushes scan_work
to avoid competing ns addition/removal
3. continue to teardown the controller
However, if err_work was scheduled to run in (1), it is designed to
cancel any inflight I/O, particularly I/O that is originating from ns
scan_work in (2), but because it is cancelled in .stop_ctrl(), we can
prevent forward progress of (2) as ns scanning is blocking on I/O
(that will never be cancelled).
The race is:
1. transport layer error observed -> err_work is scheduled
2. scan_work executes, discovers ns, generate I/O to it
3. nvme_ctop_ctrl() -> .stop_ctrl() -> cancel_work_sync(err_work)
- err_work never executed
4. nvme_remove_namespaces() -> flush_work(scan_work)
--> deadlock, because scan_work is blocked on I/O that was supposed
to be cancelled by err_work, but was cancelled before executing (see
stack trace [1]).
Fix this by flushing err_work instead of cancelling it, to force it
to execute and cancel all inflight I/O.
[1]:
--
Call Trace:
<TASK>
__schedule+0x390/0x910
? scan_shadow_nodes+0x40/0x40
schedule+0x55/0xe0
io_schedule+0x16/0x40
do_read_cache_page+0x55d/0x850
? __page_cache_alloc+0x90/0x90
read_cache_page+0x12/0x20
read_part_sector+0x3f/0x110
amiga_partition+0x3d/0x3e0
? osf_partition+0x33/0x220
? put_partition+0x90/0x90
bdev_disk_changed+0x1fe/0x4d0
blkdev_get_whole+0x7b/0x90
blkdev_get_by_dev+0xda/0x2d0
device_add_disk+0x356/0x3b0
nvme_mpath_set_live+0x13c/0x1a0 [nvme_core]
? nvme_parse_ana_log+0xae/0x1a0 [nvme_core]
nvme_update_ns_ana_state+0x3a/0x40 [nvme_core]
nvme_mpath_add_disk+0x120/0x160 [nvme_core]
nvme_alloc_ns+0x594/0xa00 [nvme_core]
nvme_validate_or_alloc_ns+0xb9/0x1a0 [nvme_core]
? __nvme_submit_sync_cmd+0x1d2/0x210 [nvme_core]
nvme_scan_work+0x281/0x410 [nvme_core]
process_one_work+0x1be/0x380
worker_thread+0x37/0x3b0
? process_one_work+0x380/0x380
kthread+0x12d/0x150
? set_kthread_struct+0x50/0x50
ret_from_fork+0x1f/0x30
</TASK>
INFO: task nvme:6725 blocked for more than 491 seconds.
Not tainted 5.15.65-f0.el7.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:nvme state:D
stack: 0 pid: 6725 ppid: 1761 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x390/0x910
? sched_clock+0x9/0x10
schedule+0x55/0xe0
schedule_timeout+0x24b/0x2e0
? try_to_wake_up+0x358/0x510
? finish_task_switch+0x88/0x2c0
wait_for_completion+0xa5/0x110
__flush_work+0x144/0x210
? worker_attach_to_pool+0xc0/0xc0
flush_work+0x10/0x20
nvme_remove_namespaces+0x41/0xf0 [nvme_core]
nvme_do_delete_ctrl+0x47/0x66 [nvme_core]
nvme_sysfs_delete.cold.96+0x8/0xd [nvme_core]
dev_attr_store+0x14/0x30
sysfs_kf_write+0x38/0x50
kernfs_fop_write_iter+0x146/0x1d0
new_sync_write+0x114/0x1b0
? intel_pmu_handle_irq+0xe0/0x420
vfs_write+0x18d/0x270
ksys_write+0x61/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
--
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When we delete a controller, we execute the following:
1. nvme_stop_ctrl() - stop some work elements that may be
inflight or scheduled (specifically also .stop_ctrl
which cancels ctrl error recovery work)
2. nvme_remove_namespaces() - which first flushes scan_work
to avoid competing ns addition/removal
3. continue to teardown the controller
However, if err_work was scheduled to run in (1), it is designed to
cancel any inflight I/O, particularly I/O that is originating from ns
scan_work in (2), but because it is cancelled in .stop_ctrl(), we can
prevent forward progress of (2) as ns scanning is blocking on I/O
(that will never be cancelled).
The race is:
1. transport layer error observed -> err_work is scheduled
2. scan_work executes, discovers ns, generate I/O to it
3. nvme_ctop_ctrl() -> .stop_ctrl() -> cancel_work_sync(err_work)
- err_work never executed
4. nvme_remove_namespaces() -> flush_work(scan_work)
--> deadlock, because scan_work is blocked on I/O that was supposed
to be cancelled by err_work, but was cancelled before executing.
Fix this by flushing err_work instead of cancelling it, to force it
to execute and cancel all inflight I/O.
Fixes: b435ecea2a4d ("nvme: Add .stop_ctrl to nvme ctrl ops")
Fixes: f6c8e432cb04 ("nvme: flush namespace scanning work just before removing namespaces")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
1, Enable ZBOOT, KEXEC and BPF_JIT;
2, Add more patition types;
3, Add some USB Type-C options;
4, Add some common network options;
5, Add some Bluetooth device drivers;
6, Remove obsolete config options (for some detailed information, see
Link).
Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/
Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This add ACPI-based generic laptop driver for Loongson-3. Some of the
codes are derived from drivers/platform/x86/thinkpad_acpi.c.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
BPF programs are normally handled by a BPF interpreter, add BPF JIT
support for LoongArch to allow the kernel to generate native code when
a program is loaded into the kernel. This will significantly speed-up
processing of BPF programs.
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
According to the "Table of Instruction Encoding" in LoongArch Reference
Manual [1], add some instruction opcodes and formats which are used in
the BPF JIT for LoongArch.
[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#table-of-instruction-encoding
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
{signed,unsigned}_imm_check() will also be used in the bpf jit, so move
them from module.c to inst.h, this is preparation for later patches.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This patch adds support for kdump. In kdump case the normal kernel will
reserve a region for the crash kernel and jump there on panic.
Arch-specific functions are added to allow for implementing a crash dump
file interface, /proc/vmcore, which can be viewed as a ELF file.
A user-space tool, such as kexec-tools, is responsible for allocating a
separate region for the core's ELF header within the crash kdump kernel
memory and filling it in when executing kexec_load().
Then, its location will be advertised to the crash dump kernel via a
command line argument "elfcorehdr=", and the crash dump kernel will
preserve this region for later use with arch_reserve_vmcore() at boot
time.
At the same time, the crash kdump kernel is also limited within the
"crashkernel" area via a command line argument "mem=", so as not to
destroy the original kernel dump data.
In the crash dump kernel environment, /proc/vmcore is used to access the
primary kernel's memory with copy_oldmem_page().
I tested kdump on LoongArch machines (Loongson-3A5000) and it works as
expected (suggested crashkernel parameter is "crashkernel=512M@2560M"),
you may test it by triggering a crash through /proc/sysrq-trigger:
$ sudo kexec -p /boot/vmlinux-kdump --reuse-cmdline --append="nr_cpus=1"
# echo c > /proc/sysrq-trigger
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add three new files, kexec.h, machine_kexec.c and relocate_kernel.S to
the LoongArch architecture, so as to add support for the kexec re-boot
mechanism (CONFIG_KEXEC) on LoongArch platforms.
Kexec supports loading vmlinux.elf in ELF format and vmlinux.efi in PE
format.
I tested kexec on LoongArch machines (Loongson-3A5000) and it works as
expected:
$ sudo kexec -l /boot/vmlinux.efi --reuse-cmdline
$ sudo kexec -e
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Inspired by commit 9fb7410f955("arm64/BUG: Use BRK instruction for
generic BUG traps"), do similar for LoongArch to use generic BUG()
handler.
This patch uses the BREAK software breakpoint instruction to generate
a trap instead, similarly to most other arches, with the generic BUG
code generating the dmesg boilerplate.
This allows bug metadata to be moved to a separate table and reduces
the amount of inline code at BUG() and WARN() sites. This also avoids
clobbering any registers before they can be dumped.
To mitigate the size of the bug table further, this patch makes use of
the existing infrastructure for encoding addresses within the bug table
as 32-bit relative pointers instead of absolute pointers.
(Note: this limits the max kernel size to 2GB.)
Before patch:
[ 3018.338013] lkdtm: Performing direct entry BUG
[ 3018.342445] Kernel bug detected[#5]:
[ 3018.345992] CPU: 2 PID: 865 Comm: cat Tainted: G D 6.0.0-rc6+ #35
After patch:
[ 125.585985] lkdtm: Performing direct entry BUG
[ 125.590433] ------------[ cut here ]------------
[ 125.595020] kernel BUG at drivers/misc/lkdtm/bugs.c:78!
[ 125.600211] Oops - BUG[#1]:
[ 125.602980] CPU: 3 PID: 410 Comm: cat Not tainted 6.0.0-rc6+ #36
Out-of-line file/line data information obtained compared to before.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add SysRq-x (TLB Dump) support for LoongArch, which is useful for
debugging.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The perf events infrastructure of LoongArch is very similar to old MIPS-
based Loongson, so most of the codes are derived from MIPS.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On NUMA system, the performance of qspinlock is better than generic
spinlock. Below is the UnixBench test results on a 8 nodes (4 cores
per node, 32 cores in total) machine.
A. With generic spinlock:
System Benchmarks Index Values BASELINE RESULT INDEX
Dhrystone 2 using register variables 116700.0 449574022.5 38523.9
Double-Precision Whetstone 55.0 85190.4 15489.2
Execl Throughput 43.0 14696.2 3417.7
File Copy 1024 bufsize 2000 maxblocks 3960.0 143157.8 361.5
File Copy 256 bufsize 500 maxblocks 1655.0 37631.8 227.4
File Copy 4096 bufsize 8000 maxblocks 5800.0 444814.2 766.9
Pipe Throughput 12440.0 5047490.7 4057.5
Pipe-based Context Switching 4000.0 2021545.7 5053.9
Process Creation 126.0 23829.8 1891.3
Shell Scripts (1 concurrent) 42.4 33756.7 7961.5
Shell Scripts (8 concurrent) 6.0 4062.9 6771.5
System Call Overhead 15000.0 2479748.6 1653.2
========
System Benchmarks Index Score 2955.6
B. With qspinlock:
System Benchmarks Index Values BASELINE RESULT INDEX
Dhrystone 2 using register variables 116700.0 449467876.9 38514.8
Double-Precision Whetstone 55.0 85174.6 15486.3
Execl Throughput 43.0 14769.1 3434.7
File Copy 1024 bufsize 2000 maxblocks 3960.0 146150.5 369.1
File Copy 256 bufsize 500 maxblocks 1655.0 37496.8 226.6
File Copy 4096 bufsize 8000 maxblocks 5800.0 447527.0 771.6
Pipe Throughput 12440.0 5175989.2 4160.8
Pipe-based Context Switching 4000.0 2207747.8 5519.4
Process Creation 126.0 25125.5 1994.1
Shell Scripts (1 concurrent) 42.4 33461.2 7891.8
Shell Scripts (8 concurrent) 6.0 4024.7 6707.8
System Call Overhead 15000.0 2917278.6 1944.9
========
System Benchmarks Index Score 3040.1
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We can support more cache attributes (e.g., CC, SUC and WUC) and page
protection when we use TLB for ioremap(). The implementation is based
on GENERIC_IOREMAP.
The existing simple ioremap() implementation has better performance so
we keep it and introduce ARCH_IOREMAP to control the selection.
We move pagetable_init() earlier to make early ioremap() works, and we
modify the PCI ecam mapping because the TLB-based version of ioremap()
will actually take the size into account.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Accidental access to /dev/mem is obviously disastrous, but specific
access can be used by people debugging the kernel. So select GENERIC_
LIB_DEVMEM_IS_ALLOWED, as well as define ARCH_HAS_VALID_PHYS_ADDR_RANGE
and related helpers, to support access filter to /dev/mem interface.
Signed-off-by: Weihao Li <liweihao@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Current cache probe and flush methods have some drawbacks:
1, Assume there are 3 cache levels and only 3 levels;
2, Assume L1 = I + D, L2 = V, L3 = S, V is exclusive, S is inclusive.
However, the fact is I + D, I + D + V, I + D + S and I + D + V + S are
all valid. So, refactor the cache probe and flush methods to adapt more
types of cache hierarchy.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This patch simplifies TLB load, store and modify exception handlers:
1. Reduce instructions, such as alu/csr and memory access;
2. Execute tlb search instruction only in the fast path;
3. Return directly from the fast path for both normal and huge pages;
4. Re-tab the assembly for better vertical alignment.
And fixes the concurrent modification issue of fast path for huge pages.
This issue will occur in the following steps:
CPU-1 (In TLB exception) CPU-2 (In THP splitting)
1: Load PMD entry (HUGE=1)
2: Goto huge path
3: Store PMD entry (HUGE=0)
4: Reload PMD entry (HUGE=0)
5: Fill TLB entry (PA is incorrect)
This patch also slightly improves the TLB processing performance:
* Normal pages: 2.15%, Huge pages: 1.70%.
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
int main(int argc, char *argv[])
{
size_t page_size;
size_t mem_size;
size_t off;
void *base;
int flags;
int i;
if (argc < 2) {
fprintf(stderr, "%s MEM_SIZE [HUGE]\n", argv[0]);
return -1;
}
page_size = sysconf(_SC_PAGESIZE);
flags = MAP_PRIVATE | MAP_ANONYMOUS;
mem_size = strtoul(argv[1], NULL, 10);
if (argc > 2)
flags |= MAP_HUGETLB;
for (i = 0; i < 10; i++) {
base = mmap(NULL, mem_size, PROT_READ, flags, -1, 0);
if (base == MAP_FAILED) {
fprintf(stderr, "Map memory failed!\n");
return -1;
}
for (off = 0; off < mem_size; off += page_size)
*(volatile int *)(base + off);
munmap(base, mem_size);
}
return 0;
}
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
GCC >= 13 and GNU assembler >= 2.40 use these relocations to address
external symbols, so we need to add them.
Let the module loader emit GOT entries for data symbols so we would be
able to handle GOT relocations. The GOT entry is just the data's symbol
address.
In module.lds, emit a stub .got section for a section header entry. The
actual content of the section entry will be filled at runtime by module_
frob_arch_sections().
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Binutils >= 2.40 uses R_LARCH_B26 instead of R_LARCH_SOP_PUSH_PLT_PCREL,
and R_LARCH_PCALA* instead of R_LARCH_SOP_PUSH_PCREL.
Handle R_LARCH_B26 and R_LARCH_PCALA* in the module loader. For R_LARCH_
B26, also create a PLT entry as needed.
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
These relocation types are used by GNU binutils >= 2.40 and GCC >= 13.
Add their definitions so we will be able to use them in later patches.
Link: https://github.com/loongson/LoongArch-Documentation/pull/57
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
If explicit relocation hints are used by the toolchain, -Wa,-mla-*
options will be useless for the C code. So only use them for the
!CONFIG_AS_HAS_EXPLICIT_RELOCS case.
Replace "la" with "la.pcrel" in head.S to keep the semantic consistent
with new and old toolchains for the low level startup code.
For per-CPU variables, the "address" of the symbol is actually an offset
from $r21. The value is near the loading address of main kernel image,
but far from the loading address of modules. So we use model("extreme")
attibute to tell the compiler that a PC-relative addressing with 32-bit
offset is not sufficient for local per-CPU variables.
The behavior with different assemblers and compilers are summarized in
the following table:
AS has CC has
explicit relocs explicit relocs * Behavior
==============================================================
No No Use la.* macros.
No change from Linux 6.0.
--------------------------------------------------------------
No Yes Disable explicit relocs.
No change from Linux 6.0.
--------------------------------------------------------------
Yes No Not supported.
--------------------------------------------------------------
Yes Yes Enable explicit relocs.
No -Wa,-mla* options used.
==============================================================
*: We assume CC must have model attribute if it has explicit relocs.
Both features are added in GCC 13 development cycle, so any GCC
release >= 13 should be OK. Using early GCC 13 development snapshots
may produce modules with unsupported relocations.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=f09482a
Link: https://gcc.gnu.org/r13-1834
Link: https://gcc.gnu.org/r13-2199
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
GNU as >= 2.40 and GCC >= 13 will support using explicit relocation
hints in the assembly code, instead of la.* macros. The usage of
explicit relocation hints can improve code generation so it's enabled
by default by GCC >= 13.
Introduce a Kconfig option AS_HAS_EXPLICIT_RELOCS as the switch for
"use explicit relocation hints or not".
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
There is a spelling mistake in a commented section. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING
forcibly") allows compiler to uninline functions marked as 'inline'.
In case of __xchg()/__cmpxchg() this would cause to reference
BUILD_BUG(), which is an error case for catching bugs and will not
happen for correct code, if __xchg()/__cmpxchg() is inlined.
This bug can be produced with CONFIG_DEBUG_SECTION_MISMATCH enabled,
and the solution is similar to below commits:
46f1619500d0225 ("MIPS: include: Mark __xchg as __always_inline"),
88356d09904bc60 ("MIPS: include: Mark __cmpxchg as __always_inline").
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Move local_flush_tlb_all() earlier (just after setup_ptwalker() and
before page allocation). This can avoid stale TLB entries misguiding
the later page allocation. Without this patch the second kernel of
kexec/kdump fails to boot SMP.
BTW, move output_pgtable_bits_defines() into tlb_init() since it has
nothing to do with tlb handler setup.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Now io master CPUs are not hotpluggable on LoongArch, but in the current
code only /sys/devices/system/cpu/cpu0/online is not created. Let us set
the hotpluggable field of all the io master CPUs as 0, then prevent to
create sysfs control file for all the io master CPUs which confuses some
user space tools. This is similar with commit 9cce844abf07 ("MIPS: CPU#0
is not hotpluggable").
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Don't overwrite the SMBIOS-provided CPU name on coming back from CPU-
hotplug (including S3/S4) if it is already initialized.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Poll CQ functions shouldn't sleep as they are called in atomic context.
The following splat appears once the mlx5_aso_poll_cq() is used in such
flow.
BUG: scheduling while atomic: swapper/17/0/0x00000100
Modules linked in: sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core fuse [last unloaded: mlx5_core]
CPU: 17 PID: 0 Comm: swapper/17 Tainted: G W 6.0.0-rc2+ #13
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x34/0x44
__schedule_bug.cold+0x47/0x53
__schedule+0x4b6/0x670
? hrtimer_start_range_ns+0x28d/0x360
schedule+0x50/0x90
schedule_hrtimeout_range_clock+0x98/0x120
? __hrtimer_init+0xb0/0xb0
usleep_range_state+0x60/0x90
mlx5_aso_poll_cq+0xad/0x190 [mlx5_core]
mlx5e_ipsec_aso_update_curlft+0x81/0xb0 [mlx5_core]
xfrm_timer_handler+0x6b/0x360
? xfrm_find_acq_byseq+0x50/0x50
__hrtimer_run_queues+0x139/0x290
hrtimer_run_softirq+0x7d/0xe0
__do_softirq+0xc7/0x272
irq_exit_rcu+0x87/0xb0
sysvec_apic_timer_interrupt+0x72/0x90
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x16/0x20
RIP: 0010:default_idle+0x18/0x20
Code: ae 7d ff ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 8b 05 b5 30 0d 01 85 c0 7e 07 0f 00 2d 0a e3 53 00 fb f4 <c3> 0f 1f 80 00 00 00 00 0f 1f 44 00 00 65 48 8b 04 25 80 ad 01 00
RSP: 0018:ffff888100883ee0 EFLAGS: 00000242
RAX: 0000000000000001 RBX: ffff888100849580 RCX: 4000000000000000
RDX: 0000000000000001 RSI: 0000000000000083 RDI: 000000000008863c
RBP: 0000000000000011 R08: 00000064e6977fa9 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
default_idle_call+0x37/0xb0
do_idle+0x1cd/0x1e0
cpu_startup_entry+0x19/0x20
start_secondary+0xfe/0x120
secondary_startup_64_no_verify+0xcd/0xdb
</TASK>
softirq: huh, entered softirq 8 HRTIMER 00000000a97c08cb with preempt_count 00000100, exited with 00000000?
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip fixes from Marc Zyngier:
- Fix IMX-MU Kconfig, keeping it private to IMX
- Fix a register offset for the same IMX-MU driver
- Fix the ls-extirq irqchip driver that would use the wrong
flavour of spinlocks
Link: https://lore.kernel.org/r/20221012075125.1244143-1-maz@kernel.org
|
