summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-02ARM: dts: vf610-zii-dev-rev-b: Add missing newlineAndreas Färber
Found while reviewing Marvell dsa bindings usage. Fixes: f283745b3caf ("arm: vf610: zii devel b: Add support for switch interrupts") Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-02ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entryGary Bisson
The NANDF_CS2 pad is also part of the wlan-vmmcgrp iomux group. Removing is from the usdhc2grp group avoids the following error: imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_NANDF_CS2 already requested by regulators:regulator@4; cannot claim for 2194000.usdhc imx6q-pinctrl 20e0000.iomuxc: pin-187 (2194000.usdhc) status -22 imx6q-pinctrl 20e0000.iomuxc: could not request pin 187 (MX6Q_PAD_NANDF_CS2) from group usdhc2grp on device 20e0000.iomuxc Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-02ARM: dts: imx31: fix AVIC base addressVladimir Zapolskiy
On i.MX31 AVIC interrupt controller base address is at 0x68000000. The problem was shadowed by the AVIC driver, which takes the correct base address from a SoC specific header file. Fixes: d2a37b3d91f4 ("ARM i.MX31: Add devicetree support") Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-01Merge branch 'l2tp-socket-lookup-fixes'David S. Miller
Guillaume Nault says: ==================== l2tp: socket lookup fixes for l2tp_ip and l2tp_ip6 There are still some cases that aren't correctly handled in the socket lookup functions of l2tp_ip and l2tp_ip6. This series fixes lookups for connected sockets and for sockets bound to the IPv6 unspecified address. bind() and connect() should now work as expected on IPPROTO_L2TP sockets. Extra features, like SO_REUSEADDR, remain unsupported. The matching conditions in __l2tp_ip6_bind_lookup() and __l2tp_ip_bind_lookup() are getting hard to read. I've kept the single test approach to make the intend of the patches clear. I'll split the conditionals once these fixes reach net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01l2tp: take remote address into account in l2tp_ip and l2tp_ip6 socket lookupsGuillaume Nault
For connected sockets, __l2tp_ip{,6}_bind_lookup() needs to check the remote IP when looking for a matching socket. Otherwise a connected socket can receive traffic not originating from its peer. Drop l2tp_ip_bind_lookup() and l2tp_ip6_bind_lookup() instead of updating their prototype, as these functions aren't used. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01l2tp: consider '::' as wildcard address in l2tp_ip6 socket lookupGuillaume Nault
An L2TP socket bound to the unspecified address should match with any address. If not, it can't receive any packet and __l2tp_ip6_bind_lookup() can't prevent another socket from binding on the same device/tunnel ID. While there, rename the 'addr' variable to 'sk_laddr' (local addr), to make following patch clearer. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01drop_monitor: add missing call to genlmsg_endReiter Wolfgang
Update nlmsg_len field with genlmsg_end to enable userspace processing using nlmsg_next helper. Also adds error handling. Signed-off-by: Reiter Wolfgang <wr0112358@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02openrisc: Add _text symbol to fix ksym build errorStafford Horne
The build robot reports: .tmp_kallsyms1.o: In function `kallsyms_relative_base': >> (.rodata+0x8a18): undefined reference to `_text' This is when using 'make alldefconfig'. Adding this _text symbol to mark the start of the kernel as in other architecture fixes this. Signed-off-by: Stafford Horne <shorne@gmail.com> Acked-by: Jonas Bonn <jonas@southpole.se>
2017-01-01Linux 4.10-rc2v4.10-rc2Linus Torvalds
2017-01-01Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull DAX updates from Dan Williams: "The completion of Jan's DAX work for 4.10. As I mentioned in the libnvdimm-for-4.10 pull request, these are some final fixes for the DAX dirty-cacheline-tracking invalidation work that was merged through the -mm, ext4, and xfs trees in -rc1. These patches were prepared prior to the merge window, but we waited for 4.10-rc1 to have a stable merge base after all the prerequisites were merged. Quoting Jan on the overall changes in these patches: "So I'd like all these 6 patches to go for rc2. The first three patches fix invalidation of exceptional DAX entries (a bug which is there for a long time) - without these patches data loss can occur on power failure even though user called fsync(2). The other three patches change locking of DAX faults so that ->iomap_begin() is called in a more relaxed locking context and we are safe to start a transaction there for ext4" These have received a build success notification from the kbuild robot, and pass the latest libnvdimm unit tests. There have not been any -next releases since -rc1, so they have not appeared there" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: ext4: Simplify DAX fault path dax: Call ->iomap_begin without entry lock during dax fault dax: Finish fault completely when loading holes dax: Avoid page invalidation races and unnecessary radix tree traversals mm: Invalidate DAX radix tree entries only if appropriate ext2: Return BH_New buffers for zeroed blocks
2017-01-01net: socket: don't set sk_uid to garbage value in ->setattr()Eric Biggers
->setattr() was recently implemented for socket files to sync the socket inode's uid to the new 'sk_uid' member of struct sock. It does this by copying over the ia_uid member of struct iattr. However, ia_uid is actually only valid when ATTR_UID is set in ia_valid, indicating that the uid is being changed, e.g. by chown. Other metadata operations such as chmod or utimes leave ia_uid uninitialized. Therefore, sk_uid could be set to a "garbage" value from the stack. Fix this by only copying the uid over when ATTR_UID is set. Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.") Signed-off-by: Eric Biggers <ebiggers@google.com> Tested-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-31PM / domains: Fix 'may be used uninitialized' build warningAugusto Mecking Caringi
This patch fixes the following gcc warning: drivers/base/power/domain.c: In function ‘genpd_runtime_resume’: drivers/base/power/domain.c:642:14: warning: ‘time_start’ may be used uninitialized in this function [-Wmaybe-uninitialized] elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start) The same problem (in another function in this same file) was fixed in commit d33d5a6c88fc (avoid spurious "may be used uninitialized" warning) Signed-off-by: Augusto Mecking Caringi <augustocaringi@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-31cpufreq: intel_pstate: Always keep all limits settings in syncRafael J. Wysocki
Make intel_pstate update per-logical-CPU limits when the global settings are changed to ensure that they are always in sync and users will not see confusing values in per-logical-CPU sysfs attributes. This also fixes the problem that setting the "no_turbo" global attribute to 1 in the "passive" mode (ie. when intel_pstate acts as a regular cpufreq driver) when scaling_governor is set to "performance" has no effect. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2016-12-31cpufreq: intel_pstate: Use locking in intel_cpufreq_verify_policy()Rafael J. Wysocki
Race conditions are possible if intel_cpufreq_verify_policy() is executed in parallel with global limits updates from sysfs, so the invocation of intel_pstate_update_perf_limits() in it should be carried out under intel_pstate_limits_lock. Make that happen. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2016-12-31cpufreq: intel_pstate: Use locking in intel_pstate_resume()Rafael J. Wysocki
Theoretically, intel_pstate_resume() may be executed in parallel with intel_pstate_set_policy(), if the latter is invoked via cpufreq_update_policy() as a result of a notification, so use intel_pstate_limits_lock in there too to avoid race conditions. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2016-12-31iio: accel: st_accel: fix LIS3LV02 reading and scalingLinus Walleij
The LIS3LV02 has a special bit that need to be set to get the read values left aligned. Before this patch we get gibberish like this: iio_generic_buffer -a -c10 -n lis3lv02dl_accel (...) 0.000000 -0.010042 -0.642688 19155832931907 0.000000 -0.010042 -0.642688 19155858751073 Which is because we read a raw value for 1g as 64 which is the nominal 1024 for 1g shifted 4 bits to the left by being right-aligned rather than left aligned. Since all other sensors are left aligned, add some code to set the special DAS (data alignment setting) bit to 1 so that the right value is now read like this: iio_generic_buffer -a -c10 -n lis3lv02dl_accel (...) 0.000000 -0.147095 -10.120135 24761614364956 -0.029419 -0.176514 -10.120135 24761631624540 The scaling was weird as well: we have a gain of 1000 for 1g and 3000 for 6g. I don't even remember how I came up with the old values but they are wrong. Fixes: 3acddf74f807 ("iio: st-sensors: add support for lis3lv02d accelerometer") Cc: Lorenzo Bianconi <lorenzo.bianconi@st.com> Cc: Giuseppe Barba <giuseppe.barba@st.com> Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-12-31iio: common: st_sensors: fix channel data parsingLorenzo Bianconi
Using realbits as i2c/spi read len, when that value is not byte aligned (e.g 12 bits), lead to skip msb part of out data registers. Fix this taking into account scan_type.shift in addition to scan_type.realbits as read length: read_len = DIV_ROUND_UP(realbits + shift, 8) This fix has been tested on 8, 12, 16, 24 bit sensors Fixes: e7385de5291e ("iio:st_sensors: align on storagebits boundaries") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-12-31drm/i915: Drop kerneldoc markup from non-kerneldoc enum drrs_refresh_rate_typeChris Wilson
DRRS is not yet kerneldoc despite the allusion prior to enum drrs_refresh_rate_type. Drop the '**' to avoid the warnings from make htmldocs. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161231112012.29263-4-chris@chris-wilson.co.uk
2016-12-31drm/i915: Complete kerneldoc for struct i915_gem_contextChris Wilson
The existing kerneldoc was outdated, so time for a refresh. v2: Use single line kdoc, mention functions for manipulation Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161231112012.29263-3-chris@chris-wilson.co.uk
2016-12-31drm/i915: Fix kerneldoc for i915_gem_object_pin_map()Chris Wilson
Parameter - no. Parameter: yes. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161231112012.29263-2-chris@chris-wilson.co.uk
2016-12-31drm/i915: Move assert of page pin vs bind count into i915_vma_unbindChris Wilson
The read of the page pin count and the bind count are unordered, presenting races in the assert and it firing off incorrectly. Prevent this by restricting the assert to the vma bind/unbind routines where we have local cpu ordering between the two. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161231112012.29263-1-chris@chris-wilson.co.uk
2016-12-31fscrypt: fix renaming and linking special filesEric Biggers
Attempting to link a device node, named pipe, or socket file into an encrypted directory through rename(2) or link(2) always failed with EPERM. This happened because fscrypt_has_permitted_context() saw that the file was unencrypted and forbid creating the link. This behavior was unexpected because such files are never encrypted; only regular files, directories, and symlinks can be encrypted. To fix this, make fscrypt_has_permitted_context() always return true on special files. This will be covered by a test in my encryption xfstests patchset. Fixes: 9bd8212f981e ("ext4 crypto: add encryption policy and password salt support") Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Richard Weinberger <richard@nod.at> Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-30iio: max44000: correct value in illuminance_integration_time_availableAkinobu Mita
According to the datasheet, the shortest available integration time for ALS ADC conversion is 1.5625ms but illuminance_integration_time_available sysfs file shows wrong value. Cc: Crestez Dan Leonard <leonard.crestez@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Fixes: d5d8f49b6 ("max44000: Expose ambient sensor scaling") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-12-30ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETnKishon Vijay Abraham I
Add 'gpios' property to pcie1 dt node and populate it with GPIO3_23 in order to drive PCIE_RESETn high. This gets PCIe cards to be detected in AM572X IDK board. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-30Merge tag 'docs-4.10-rc1-fix' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "Two small fixes: - A merge error on my part broke the DocBook build. I've requisitioned one of tglx's frozen sharks for appropriate disciplinary action and resolved to be more careful about testing the DocBook stuff as long as it's still around. - Fix an error in unaligned-memory-access.txt" * tag 'docs-4.10-rc1-fix' of git://git.lwn.net/linux: Documentation/unaligned-memory-access.txt: fix incorrect comparison operator docs: Fix build failure
2016-12-30Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a boot failure on some platforms when crypto self test is enabled along with the new acomp interface" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: testmgr - Use heap buffer for acomp test input
2016-12-30drm/cma-helpers: Use recommened kerneldoc for struct member refsDaniel Vetter
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Review from Laurent: - Move misplaced doc change to the right patch. - Remove "DRM driver's", it's redundant. - Spotted 3 more places where where we could add prose reference with a real one. Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-14-git-send-email-daniel.vetter@ffwll.ch
2016-12-30drm/cma-helper: simplify setup for drivers with ->dirty callbacksDaniel Vetter
If we store the fb funcs pointer, we can remove a bit of boilerplate. Also remove the _fbdev_ in the example code, since the fb_funcs->dirty callback has nothing to do with fbdev. It's a KMS feature, only used by the fbdev deferred_io support to implement flushing/upload. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [danvet: Move the misplaced kerneldoc change from a later patch to this one here.] Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-11-git-send-email-daniel.vetter@ffwll.ch
2016-12-30drm/armada: Fix compile failDaniel Vetter
I reported the include issue for tracepoints a while ago, but nothing seems to have happened. Now it bit us, since the drm_mm_print conversion was broken for armada. Fix it, so I can re-enable armada in the drm-misc build configs. v2: Rebase just the compile fix on top of Chris' build fix. Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483115932-19584-1-git-send-email-daniel.vetter@ffwll.ch
2016-12-30iio: adc: TI_AM335X_ADC should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/iio/adc/ti_am335x_adc.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: f438b9da (" drivers: iio: ti_am335x_adc: add dma support") Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-12-30drm/armada: s/drm_mm_dump_table/drm_mm_print/Chris Wilson
Missed rename during v2 of b5c3714fe878 ("drm/mm: Convert to drm_printer") Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: b5c3714fe878 ("drm/mm: Convert to drm_printer") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161230145510.12951-1-chris@chris-wilson.co.uk
2016-12-30arm64: dts: vexpress: Support GICC_DIR operationsSudeep Holla
The GICv2 CPU interface registers span across 8K, not 4K as indicated in the DT. Only the GICC_DIR register is located after the initial 4K boundary, leaving a functional system but without support for separately EOI'ing and deactivating interrupts. After this change the system supports split priority drop and interrupt deactivation. This patch is based on similar one from Christoffer Dall: commit 368400e242dc ("ARM: dts: vexpress: Support GICC_DIR operations") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-12-30vfio-pci: use 32-bit comparisons for register address for gcc-4.5Arnd Bergmann
Using ancient compilers (gcc-4.5 or older) on ARM, we get a link failure with the vfio-pci driver: ERROR: "__aeabi_lcmp" [drivers/vfio/pci/vfio-pci.ko] undefined! The reason is that the compiler tries to do a comparison of a 64-bit range. This changes it to convert to a 32-bit number explicitly first, as newer compilers do for themselves. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-12-30vfio-mdev: Make mdev_device private and abstract interfacesAlex Williamson
Abstract access to mdev_device so that we can define which interfaces are public rather than relying on comments in the structure. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Jike Song <jike.song@intel.com> Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
2016-12-30vfio-mdev: Make mdev_parent privateAlex Williamson
Rather than hoping for good behavior by marking some elements internal, enforce it by making the entire structure private and creating an accessor function for the one useful external field. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Jike Song <jike.song@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
2016-12-30vfio-mdev: de-polute the namespace, rename parent_device & parent_opsAlex Williamson
Add an mdev_ prefix so we're not poluting the namespace so much. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Jike Song <jike.song@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
2016-12-30vfio-mdev: Fix remove raceAlex Williamson
Using the mtty mdev sample driver we can generate a remove race by starting one shell that continuously creates mtty devices and several other shells all attempting to remove devices, in my case four remove shells. The fault occurs in mdev_remove_sysfs_files() where the passed type arg is NULL, which suggests we've received a struct device in mdev_device_remove() but it's in some sort of teardown state. The solution here is to make use of the accidentally unused list_head on the mdev_device such that the mdev core keeps a list of all the mdev devices. This allows us to validate that we have a valid mdev before we start removal, remove it from the list to prevent others from working on it, and if the vendor driver refuses to remove, we can re-add it to the list. Cc: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-12-30vfio/type1: Restore mapping performance with mdev supportAlex Williamson
As part of the mdev support, type1 now gets a task reference per vfio_dma and uses that to get an mm reference for the task while working on accounting. That's correct, but it's not fast. For some paths, like vfio_pin_pages_remote(), we know we're only called from user context, so we can restore the lighter weight calls. In other cases, we're effectively already testing whether we're in the stored task context elsewhere, extend this vfio_lock_acct() as well. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
2016-12-30vfio-mdev: Fix mtty sample driver buildingAlex Williamson
This sample driver was originally under Documentation/ and was moved to samples, but build support was never adjusted for the new location. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
2016-12-30ARM: dts: vexpress: Support GICC_DIR operationsChristoffer Dall
The GICv2 CPU interface registers span across 8K, not 4K as indicated in the DT. Only the GICC_DIR register is located after the initial 4K boundary, leaving a functional system but without support for separately EOI'ing and deactivating interrupts. After this change the system supports split priority drop and interrupt deactivation. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> [sudeep.holla@arm.com: included same fix for tc1 platform too] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-12-30firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwaresMartin Blumenstingl
The pre-1.0 SCPI firmwares are using single __le32 as sensor value, while the SCPI v1.0 protocol uses two __le32 as sensor values(64bit) split into 32bit upper and 32bit lower value. Using an "struct sensor_value" to read the sensor value on a pre-1.0 SCPI firmware gives garbage in the "hi_val" field. This patch fixes the issue by reading only the lower 32-bit value for all pre-1.0 SCPI versions. Suggested-by: Sudeep Holla <Sudeep.Holla@arm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [sudeep.holla@arm.com: updated the commit log to reflect the implementation] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-12-30drm: Avoid NULL dereference of drm_device.devChris Wilson
For a virtual device, drm_device.dev is NULL, so becareful not to dereference it unconditionally in core code such as drm_dev_register(). Fixes: 75f6dfe3e652 ("drm: Deduplicate driver initialization message") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161230141639.10487-1-chris@chris-wilson.co.uk
2016-12-30pinctrl: samsung: Fix the width of PINCFG_TYPE_DRV bitfields for Exynos5433Chanwoo Choi
This patch fixes the wrong width of PINCFG_TYPE_DRV bitfields for Exynos5433 because PINCFG_TYPE_DRV of Exynos5433 has 4bit fields in the *_DRV registers. Usually, other Exynos have 2bit field for PINCFG_TYPE_DRV. Fixes: 3c5ecc9ed353 ("pinctrl: exynos: Add support for Exynos5433") Cc: stable@vger.kernel.org Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Kukjin Kim <kgene@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-30drm/atomic-helpers: Remove outdated commentDaniel Vetter
We forgot to clean this up when adding connector refcounting. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-10-git-send-email-daniel.vetter@ffwll.ch
2016-12-30drm/rect: Fix formatting of example codeDaniel Vetter
Drive-by polish. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-9-git-send-email-daniel.vetter@ffwll.ch
2016-12-30drm/doc: Update styleguideDaniel Vetter
The new cool is &struct foo (kernel-doc now copes with linebreaks), and structure members should be referenced using &foo.bar. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-8-git-send-email-daniel.vetter@ffwll.ch
2016-12-30drm: Nuke connector_list locking assertDaniel Vetter
I've forgotten to remove this when revamping the connector_list locking. Cc: seanpaul@chromium.org Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-7-git-send-email-daniel.vetter@ffwll.ch
2016-12-30drm/doc: use preferred struct reference in kernel-docDaniel Vetter
sed -e 's/\( \* .*\)struct &\([_a-z]*\)/\1\&struct \2/' -i Originally I wasnt a friend of this style because I thought a line-break between the "&struct" and "foo" part would break it. But a quick test shows that " * &struct \n * foo\n" works pefectly well with current kernel-doc. So time to mass-apply these changes! Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-6-git-send-email-daniel.vetter@ffwll.ch
2016-12-30dma-buf: Use recommended structure member referenceDaniel Vetter
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-5-git-send-email-daniel.vetter@ffwll.ch
2016-12-30dma-buf: use preferred struct reference in kernel-docDaniel Vetter
sed -e 's/\( \* .*\)struct &\([_a-z]*\)/\1\&struct \2/' -i Originally I wasnt a friend of this style because I thought a line-break between the "&struct" and "foo" part would break it. But a quick test shows that " * &struct \n * foo\n" works pefectly well with current kernel-doc. So time to mass-apply these changes! Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-4-git-send-email-daniel.vetter@ffwll.ch
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 04:52:18 +0000