| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"24 MM and non-MM hotfixes. 8 marked cc:stable and 16 for post-6.0
issues.
There have been a lot of hotfixes this cycle, and this is quite a
large batch given how far we are into the -rc cycle. Presumably a
reflection of the unusually large amount of MM material which went
into 6.1-rc1"
* tag 'mm-hotfixes-stable-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
test_kprobes: fix implicit declaration error of test_kprobes
nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty
mm/cgroup/reclaim: fix dirty pages throttling on cgroup v1
mm: fix unexpected changes to {failslab|fail_page_alloc}.attr
swapfile: fix soft lockup in scan_swap_map_slots
hugetlb: fix __prep_compound_gigantic_page page flag setting
kfence: fix stack trace pruning
proc/meminfo: fix spacing in SecPageTables
mm: multi-gen LRU: retry folios written back while isolated
mailmap: update email address for Satya Priya
mm/migrate_device: return number of migrating pages in args->cpages
kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible
MAINTAINERS: update Alex Hung's email address
mailmap: update Alex Hung's email address
mm: mmap: fix documentation for vma_mas_szero
mm/damon/sysfs-schemes: skip stats update if the scheme directory is removed
mm/memory: return vm_fault_t result from migrate_to_ram() callback
mm: correctly charge compressed memory to its memcg
ipc/shm: call underlying open/close vm_ops
gcov: clang: fix the buffer overflow issue
...
|
|
Pull vfs fixes from Al Viro:
"A couple of fixes, one of them for this cycle regression..."
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: vfs_tmpfile: ensure O_EXCL flag is enforced
fs: use acquire ordering in __fget_light()
|
|
With how task_work is added and signaled, we can have TIF_NOTIFY_SIGNAL
set and no task_work pending as it got run in a previous loop. Treat
TIF_NOTIFY_SIGNAL like get_signal(), always clear it if set regardless
of whether or not task_work is pending to run.
Cc: stable@vger.kernel.org
Fixes: 46a525e199e4 ("io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few more last-minute fixes for 6.1 that have been gathered in the
last week; nothing looks too worrisome, mostly device-specific small
fixes, including the ABI fix for ASoC SOF"
* tag 'sound-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: soc-pcm: Add NULL check in BE reparenting
ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event
ASoC: SOF: dai: move AMD_HS to end of list to restore backwards-compatibility
ASoC: max98373: Add checks for devm_kcalloc
ASoC: rt711-sdca: fix the latency time of clock stop prepare state machine transitions
ASoC: soc-pcm: Don't zero TDM masks in __soc_pcm_open()
ASoC: sgtl5000: Reset the CHIP_CLK_CTRL reg on remove
ASoC: hdac_hda: fix hda pcm buffer overflow issue
ASoC: stm32: i2s: remove irqf_oneshot flag
ASoC: wm8962: Wait for updated value of WM8962_CLOCKING1 register
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, amdgpu has not quite settled down.
Most of the changes are small, and the non-amdgpu ones are all fine.
There are a bunch of DP MST DSC fixes that fix some issues introduced
in a previous larger MST rework.
The biggest one is mainly propagating some error values properly
instead of bool returns, and I think it just looks large but doesn't
really change anything too much, except propagating errors that are
required to avoid deadlocks. I've gone over it and a few others and
they've had some decent testing over the last few weeks.
Summary:
amdgpu:
- amdgpu gang submit fix
- DCN 3.1.4 fixes
- DP MST DSC deadlock fixes
- HMM userptr fixes
- Fix Aldebaran CU occupancy reporting
- GFX11 fixes
- PSP suspend/resume fix
- DCE12 KASAN fix
- DCN 3.2.x fixes
- Rotated cursor fix
- SMU 13.x fix
- DELL platform suspend/resume fixes
- VCN4 SR-IOV fix
- Display regression fix for polled connectors
i915:
- Fix GVT KVM reference count handling
- Never purge busy TTM objects
- Fix warn in intel_display_power_*_domain() functions
dma-buf:
- Use dma_fence_unwrap_for_each when importing sync files
- Fix race in dma_heap_add()
fbcon:
- Fix use of uninitialized memory in logo"
* tag 'drm-fixes-2022-11-25' of git://anongit.freedesktop.org/drm/drm: (30 commits)
drm/amdgpu/vcn: re-use original vcn0 doorbell value
drm/amdgpu: Partially revert "drm/amdgpu: update drm_display_info correctly when the edid is read"
drm/amd/display: No display after resume from WB/CB
drm/amdgpu: fix use-after-free during gpu recovery
drm/amd/pm: update driver if header for smu_13_0_7
drm/amd/display: Fix rotated cursor offset calculation
drm/amd/display: Use new num clk levels struct for max mclk index
drm/amd/display: Avoid setting pixel rate divider to N/A
drm/amd/display: Use viewport height for subvp mall allocation size
drm/amd/display: Update soc bounding box for dcn32/dcn321
drm/amd/dc/dce120: Fix audio register mapping, stop triggering KASAN
drm/amdgpu/psp: don't free PSP buffers on suspend
fbcon: Use kzalloc() in fbcon_prepare_logo()
dma-buf: fix racing conflict of dma_heap_add()
drm/amd/amdgpu: reserve vm invalidation engine for firmware
drm/amdgpu: Enable Aldebaran devices to report CU Occupancy
drm/amdgpu: fix userptr HMM range handling v2
drm/amdgpu: always register an MMU notifier for userptr
drm/amdgpu/dm/mst: Fix uninitialized var in pre_compute_mst_dsc_configs_for_state()
drm/amdgpu/dm/dp_mst: Don't grab mst_mgr->lock when computing DSC state
...
|
|
There is an interesting race condition of poll_refs which could result
in a NULL pointer dereference. The crash trace is like:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 30781 Comm: syz-executor.2 Not tainted 6.0.0-g493ffd6605b2 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:io_poll_remove_entry io_uring/poll.c:154 [inline]
RIP: 0010:io_poll_remove_entries+0x171/0x5b4 io_uring/poll.c:190
Code: ...
RSP: 0018:ffff88810dfefba0 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000040000
RDX: ffffc900030c4000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 0000000000000008 R08: ffffffff9764d3dd R09: fffffbfff3836781
R10: fffffbfff3836781 R11: 0000000000000000 R12: 1ffff11003422d60
R13: ffff88801a116b04 R14: ffff88801a116ac0 R15: dffffc0000000000
FS: 00007f9c07497700(0000) GS:ffff88811a600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffb5c00ea98 CR3: 0000000105680005 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
io_apoll_task_func+0x3f/0xa0 io_uring/poll.c:299
handle_tw_list io_uring/io_uring.c:1037 [inline]
tctx_task_work+0x37e/0x4f0 io_uring/io_uring.c:1090
task_work_run+0x13a/0x1b0 kernel/task_work.c:177
get_signal+0x2402/0x25a0 kernel/signal.c:2635
arch_do_signal_or_restart+0x3b/0x660 arch/x86/kernel/signal.c:869
exit_to_user_mode_loop kernel/entry/common.c:166 [inline]
exit_to_user_mode_prepare+0xc2/0x160 kernel/entry/common.c:201
__syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline]
syscall_exit_to_user_mode+0x58/0x160 kernel/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause for this is a tiny overlooking in
io_poll_check_events() when cocurrently run with poll cancel routine
io_poll_cancel_req().
The interleaving to trigger use-after-free:
CPU0 | CPU1
|
io_apoll_task_func() | io_poll_cancel_req()
io_poll_check_events() |
// do while first loop |
v = atomic_read(...) |
// v = poll_refs = 1 |
... | io_poll_mark_cancelled()
| atomic_or()
| // poll_refs =
IO_POLL_CANCEL_FLAG | 1
|
atomic_sub_return(...) |
// poll_refs = IO_POLL_CANCEL_FLAG |
// loop continue |
|
| io_poll_execute()
| io_poll_get_ownership()
| // poll_refs =
IO_POLL_CANCEL_FLAG | 1
| // gets the ownership
v = atomic_read(...) |
// poll_refs not change |
|
if (v & IO_POLL_CANCEL_FLAG) |
return -ECANCELED; |
// io_poll_check_events return |
// will go into |
// io_req_complete_failed() free req |
|
| io_apoll_task_func()
| // also go into
io_req_complete_failed()
And the interleaving to trigger the kernel WARNING:
CPU0 | CPU1
|
io_apoll_task_func() | io_poll_cancel_req()
io_poll_check_events() |
// do while first loop |
v = atomic_read(...) |
// v = poll_refs = 1 |
... | io_poll_mark_cancelled()
| atomic_or()
| // poll_refs =
IO_POLL_CANCEL_FLAG | 1
|
atomic_sub_return(...) |
// poll_refs = IO_POLL_CANCEL_FLAG |
// loop continue |
|
v = atomic_read(...) |
// v = IO_POLL_CANCEL_FLAG |
| io_poll_execute()
| io_poll_get_ownership()
| // poll_refs =
IO_POLL_CANCEL_FLAG | 1
| // gets the ownership
|
WARN_ON_ONCE(!(v & IO_POLL_REF_MASK))) |
// v & IO_POLL_REF_MASK = 0 WARN |
|
| io_apoll_task_func()
| // also go into
io_req_complete_failed()
By looking up the source code and communicating with Pavel, the
implementation of this atomic poll refs should continue the loop of
io_poll_check_events() just to avoid somewhere else to grab the
ownership. Therefore, this patch simply adds another AND operation to
make sure the loop will stop if it finds the poll_refs is exactly equal
to IO_POLL_CANCEL_FLAG. Since io_poll_cancel_req() grabs ownership and
will finally make its way to io_req_complete_failed(), the req will
be reclaimed as expected.
Fixes: aa43477b0402 ("io_uring: poll rework")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: tweak description and code style]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is an interesting reference bug when -ENOMEM occurs in calling of
io_install_fixed_file(). KASan report like below:
[ 14.057131] ==================================================================
[ 14.059161] BUG: KASAN: use-after-free in unix_get_socket+0x10/0x90
[ 14.060975] Read of size 8 at addr ffff88800b09cf20 by task kworker/u8:2/45
[ 14.062684]
[ 14.062768] CPU: 2 PID: 45 Comm: kworker/u8:2 Not tainted 6.1.0-rc4 #1
[ 14.063099] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 14.063666] Workqueue: events_unbound io_ring_exit_work
[ 14.063936] Call Trace:
[ 14.064065] <TASK>
[ 14.064175] dump_stack_lvl+0x34/0x48
[ 14.064360] print_report+0x172/0x475
[ 14.064547] ? _raw_spin_lock_irq+0x83/0xe0
[ 14.064758] ? __virt_addr_valid+0xef/0x170
[ 14.064975] ? unix_get_socket+0x10/0x90
[ 14.065167] kasan_report+0xad/0x130
[ 14.065353] ? unix_get_socket+0x10/0x90
[ 14.065553] unix_get_socket+0x10/0x90
[ 14.065744] __io_sqe_files_unregister+0x87/0x1e0
[ 14.065989] ? io_rsrc_refs_drop+0x1c/0xd0
[ 14.066199] io_ring_exit_work+0x388/0x6a5
[ 14.066410] ? io_uring_try_cancel_requests+0x5bf/0x5bf
[ 14.066674] ? try_to_wake_up+0xdb/0x910
[ 14.066873] ? virt_to_head_page+0xbe/0xbe
[ 14.067080] ? __schedule+0x574/0xd20
[ 14.067273] ? read_word_at_a_time+0xe/0x20
[ 14.067492] ? strscpy+0xb5/0x190
[ 14.067665] process_one_work+0x423/0x710
[ 14.067879] worker_thread+0x2a2/0x6f0
[ 14.068073] ? process_one_work+0x710/0x710
[ 14.068284] kthread+0x163/0x1a0
[ 14.068454] ? kthread_complete_and_exit+0x20/0x20
[ 14.068697] ret_from_fork+0x22/0x30
[ 14.068886] </TASK>
[ 14.069000]
[ 14.069088] Allocated by task 289:
[ 14.069269] kasan_save_stack+0x1e/0x40
[ 14.069463] kasan_set_track+0x21/0x30
[ 14.069652] __kasan_slab_alloc+0x58/0x70
[ 14.069899] kmem_cache_alloc+0xc5/0x200
[ 14.070100] __alloc_file+0x20/0x160
[ 14.070283] alloc_empty_file+0x3b/0xc0
[ 14.070479] path_openat+0xc3/0x1770
[ 14.070689] do_filp_open+0x150/0x270
[ 14.070888] do_sys_openat2+0x113/0x270
[ 14.071081] __x64_sys_openat+0xc8/0x140
[ 14.071283] do_syscall_64+0x3b/0x90
[ 14.071466] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 14.071791]
[ 14.071874] Freed by task 0:
[ 14.072027] kasan_save_stack+0x1e/0x40
[ 14.072224] kasan_set_track+0x21/0x30
[ 14.072415] kasan_save_free_info+0x2a/0x50
[ 14.072627] __kasan_slab_free+0x106/0x190
[ 14.072858] kmem_cache_free+0x98/0x340
[ 14.073075] rcu_core+0x427/0xe50
[ 14.073249] __do_softirq+0x110/0x3cd
[ 14.073440]
[ 14.073523] Last potentially related work creation:
[ 14.073801] kasan_save_stack+0x1e/0x40
[ 14.074017] __kasan_record_aux_stack+0x97/0xb0
[ 14.074264] call_rcu+0x41/0x550
[ 14.074436] task_work_run+0xf4/0x170
[ 14.074619] exit_to_user_mode_prepare+0x113/0x120
[ 14.074858] syscall_exit_to_user_mode+0x1d/0x40
[ 14.075092] do_syscall_64+0x48/0x90
[ 14.075272] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 14.075529]
[ 14.075612] Second to last potentially related work creation:
[ 14.075900] kasan_save_stack+0x1e/0x40
[ 14.076098] __kasan_record_aux_stack+0x97/0xb0
[ 14.076325] task_work_add+0x72/0x1b0
[ 14.076512] fput+0x65/0xc0
[ 14.076657] filp_close+0x8e/0xa0
[ 14.076825] __x64_sys_close+0x15/0x50
[ 14.077019] do_syscall_64+0x3b/0x90
[ 14.077199] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 14.077448]
[ 14.077530] The buggy address belongs to the object at ffff88800b09cf00
[ 14.077530] which belongs to the cache filp of size 232
[ 14.078105] The buggy address is located 32 bytes inside of
[ 14.078105] 232-byte region [ffff88800b09cf00, ffff88800b09cfe8)
[ 14.078685]
[ 14.078771] The buggy address belongs to the physical page:
[ 14.079046] page:000000001bd520e7 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800b09de00 pfn:0xb09c
[ 14.079575] head:000000001bd520e7 order:1 compound_mapcount:0 compound_pincount:0
[ 14.079946] flags: 0x100000000010200(slab|head|node=0|zone=1)
[ 14.080244] raw: 0100000000010200 0000000000000000 dead000000000001 ffff88800493cc80
[ 14.080629] raw: ffff88800b09de00 0000000080190018 00000001ffffffff 0000000000000000
[ 14.081016] page dumped because: kasan: bad access detected
[ 14.081293]
[ 14.081376] Memory state around the buggy address:
[ 14.081618] ffff88800b09ce00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 14.081974] ffff88800b09ce80: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
[ 14.082336] >ffff88800b09cf00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 14.082690] ^
[ 14.082909] ffff88800b09cf80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
[ 14.083266] ffff88800b09d000: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
[ 14.083622] ==================================================================
The actual tracing of this bug is shown below:
commit 8c71fe750215 ("io_uring: ensure fput() called correspondingly
when direct install fails") adds an additional fput() in
io_fixed_fd_install() when io_file_bitmap_get() returns error values. In
that case, the routine will never make it to io_install_fixed_file() due
to an early return.
static int io_fixed_fd_install(...)
{
if (alloc_slot) {
...
ret = io_file_bitmap_get(ctx);
if (unlikely(ret < 0)) {
io_ring_submit_unlock(ctx, issue_flags);
fput(file);
return ret;
}
...
}
...
ret = io_install_fixed_file(req, file, issue_flags, file_slot);
...
}
In the above scenario, the reference is okay as io_fixed_fd_install()
ensures the fput() is called when something bad happens, either via
bitmap or via inner io_install_fixed_file().
However, the commit 61c1b44a21d7 ("io_uring: fix deadlock on iowq file
slot alloc") breaks the balance because it places fput() into the common
path for both io_file_bitmap_get() and io_install_fixed_file(). Since
io_install_fixed_file() handles the fput() itself, the reference
underflow come across then.
There are some extra commits make the current code into
io_fixed_fd_install() -> __io_fixed_fd_install() ->
io_install_fixed_file()
However, the fact that there is an extra fput() is called if
io_install_fixed_file() calls fput(). Traversing through the code, I
find that the existing two callers to __io_fixed_fd_install():
io_fixed_fd_install() and io_msg_send_fd() have fput() when handling
error return, this patch simply removes the fput() in
io_install_fixed_file() to fix the bug.
Fixes: 61c1b44a21d7 ("io_uring: fix deadlock on iowq file slot alloc")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/be4ba4b.5d44.184a0a406a4.Coremail.linma@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
poll_refs carry two functions, the first is ownership over the request.
The second is notifying the io_poll_check_events() that there was an
event but wake up couldn't grab the ownership, so io_poll_check_events()
should retry.
We want to make poll_refs more robust against overflows. Instead of
always incrementing it, which covers two purposes with one atomic, check
if poll_refs is elevated enough and if so set a retry flag without
attempts to grab ownership. The gap between the bias check and following
atomics may seem racy, but we don't need it to be strict. Moreover there
might only be maximum 4 parallel updates: by the first and the second
poll entries, __io_arm_poll_handler() and cancellation. From those four,
only poll wake ups may be executed multiple times, but they're protected
by a spin.
Cc: stable@vger.kernel.org
Reported-by: Lin Ma <linma@zju.edu.cn>
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c762bc31f8683b3270f3587691348a7119ef9c9d.1668963050.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace atomically substracting the ownership reference at the end of
arming a poll with a cmpxchg. We try to release ownership by setting 0
assuming that poll_refs didn't change while we were arming. If it did
change, we keep the ownership and use it to queue a tw, which is fully
capable to process all events and (even tolerates spurious wake ups).
It's a bit more elegant as we reduce races b/w setting the cancellation
flag and getting refs with this release, and with that we don't have to
worry about any kinds of underflows. It's not the fastest path for
polling. The performance difference b/w cmpxchg and atomic dec is
usually negligible and it's not the fastest path.
Cc: stable@vger.kernel.org
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0c95251624397ea6def568ff040cad2d7926fd51.1668963050.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix possible out-of-bound access in ieee80211_get_rate_duration routine
as reported by the following UBSAN report:
UBSAN: array-index-out-of-bounds in net/mac80211/airtime.c:455:47
index 15 is out of range for type 'u16 [12]'
CPU: 2 PID: 217 Comm: kworker/u32:10 Not tainted 6.1.0-060100rc3-generic
Hardware name: Acer Aspire TC-281/Aspire TC-281, BIOS R01-A2 07/18/2017
Workqueue: mt76 mt76u_tx_status_data [mt76_usb]
Call Trace:
<TASK>
show_stack+0x4e/0x61
dump_stack_lvl+0x4a/0x6f
dump_stack+0x10/0x18
ubsan_epilogue+0x9/0x43
__ubsan_handle_out_of_bounds.cold+0x42/0x47
ieee80211_get_rate_duration.constprop.0+0x22f/0x2a0 [mac80211]
? ieee80211_tx_status_ext+0x32e/0x640 [mac80211]
ieee80211_calc_rx_airtime+0xda/0x120 [mac80211]
ieee80211_calc_tx_airtime+0xb4/0x100 [mac80211]
mt76x02_send_tx_status+0x266/0x480 [mt76x02_lib]
mt76x02_tx_status_data+0x52/0x80 [mt76x02_lib]
mt76u_tx_status_data+0x67/0xd0 [mt76_usb]
process_one_work+0x225/0x400
worker_thread+0x50/0x3e0
? process_one_work+0x400/0x400
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
Fixes: db3e1c40cf2f ("mac80211: Import airtime calculation code from mt76")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In S1G beacon frames there shouldn't be multi-BSSID elements
since that's not supported, remove that to avoid a potential
integer underflow and/or misparsing the frames due to the
different length of the fixed part of the frame.
While at it, initialize non_tx_data so we don't send garbage
values to the user (even if it doesn't seem to matter now.)
Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For vendor elements, the code here assumes that 5 octets
are present without checking. Since the element itself is
already checked to fit, we only need to check the length.
Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the name_assign_type attribute was introduced (commit
685343fc3ba6, "net: add name_assign_type netdev attribute"), the
loopback device was explicitly mentioned as one which would make use
of NET_NAME_PREDICTABLE:
The name_assign_type attribute gives hints where the interface name of a
given net-device comes from. These values are currently defined:
...
NET_NAME_PREDICTABLE:
The ifname has been assigned by the kernel in a predictable way
that is guaranteed to avoid reuse and always be the same for a
given device. Examples include statically created devices like
the loopback device [...]
Switch to that so that reading /sys/class/net/lo/name_assign_type
produces something sensible instead of returning -EINVAL.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when a FEC device is brought up, the irq coalesce settings
are reset to their default values (1000us, 200 frames). That's
unexpected, and breaks for example use of an appropriate .link file to
make systemd-udev apply the desired
settings (https://www.freedesktop.org/software/systemd/man/systemd.link.html),
or any other method that would do a one-time setup during early boot.
Refactor the code so that fec_restart() instead uses
fec_enet_itr_coal_set(), which simply applies the settings that are
stored in the private data, and initialize that private data with the
default values.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch addresses pfc_alloc_status array overflow occurring for
send queue index value greater than PFC priority. Queue index can be
greater than supported PFC priority for multiple scenarios (e.g. QoS,
during non zero SMQ allocation for a PF/VF).
In those scenarios the API should return default tx scheduler '0'.
This is causing mbox errors as otx2_get_smq_idx returing invalid smq value.
Fixes: 99c969a83d82 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, pause frame register GMAC_RX_FLOW_CTRL_RFE is not updated
correctly when 'ethtool -A <IFACE> autoneg off rx off tx off' command
is issued. This fix ensures the flow control change is reflected directly
in the GMAC_RX_FLOW_CTRL_RFE register.
Fixes: 46f69ded988d ("net: stmmac: Use resolved link config in mac_link_up()")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Goh, Wei Sheng <wei.sheng.goh@intel.com>
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPV6 addresses are purged when setting the number of rx/tx
rings using ethtool -G. The function aq_set_ringparam
calls dev_close, which removes the addresses. As a solution,
call an internal function (aq_ndev_close).
Fixes: c1af5427954b ("net: aquantia: Ethtool based ring size configuration")
Signed-off-by: Izabela Bakollari <ibakolla@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.
Here, constants for bitmap indices of some configs are defined and these
defines begin with the config's name, and are suffixed with BITMAP_IDX.
To avoid defines prefixed with "CONFIG", name these constants
BITMAP_IDX_FOR_CONFIG_XYZ instead of CONFIG_XYZ_BITMAP_IDX.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The watchdog timer is used to monitor whether the process
of transmitting data is timeout. If we use qlcnic driver,
the dev_watchdog() that is the timer handler of watchdog
timer will call qlcnic_tx_timeout() to process the timeout.
But the qlcnic_tx_timeout() calls msleep(), as a result,
the sleep-in-atomic-context bugs will happen. The processes
are shown below:
(atomic context)
dev_watchdog
qlcnic_tx_timeout
qlcnic_83xx_idc_request_reset
qlcnic_83xx_lock_driver
msleep
---------------------------
(atomic context)
dev_watchdog
qlcnic_tx_timeout
qlcnic_83xx_idc_request_reset
qlcnic_83xx_lock_driver
qlcnic_83xx_recover_driver_lock
msleep
Fix by changing msleep() to mdelay(), the mdelay() is
busy-waiting and the bugs could be mitigated.
Fixes: 629263acaea3 ("qlcnic: 83xx CNA inter driver communication mechanism")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a file zone transitions to the offline or readonly state from an
active state, we must clear the zone active flag and decrement the
active seq file counter. Do so in zonefs_account_active() using the new
zonefs inode flags ZONEFS_ZONE_OFFLINE and ZONEFS_ZONE_READONLY. These
flags are set if necessary in zonefs_check_zone_condition() based on the
result of report zones operation after an IO error.
Fixes: 87c9ce3ffec9 ("zonefs: Add active seq file accounting")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
linux-can-fixes-for-6.1-20221124
this is a pull request of 8 patches for net/master.
Ziyang Xuan contributes a patch for the can327, fixing a potential SKB
leak when the netdev is down.
Heiko Schocher's patch for the sja1000 driver fixes the width of the
definition of the OCR_MODE_MASK.
Zhang Changzhong contributes 4 patches. In the sja1000_isa, cc770, and
m_can_pci drivers the error path in the probe() function and in case
of the etas_es58x a function that is called by probe() are fixed.
Jiasheng Jiang add a missing check for the return value of the
devm_clk_get() in the m_can driver.
Yasushi SHOJI's patch for the mcba_usb fixes setting of the external
termination resistor.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs
copies") removed fallback to generic_copy_file_range() for cross-fs
cases inside vfs_copy_file_range().
To preserve behavior of nfsd and ksmbd server-side-copy, the fallback to
generic_copy_file_range() was added in nfsd and ksmbd code, but that
call is missing sb_start_write(), fsnotify hooks and more.
Ideally, nfsd and ksmbd would pass a flag to vfs_copy_file_range() that
will take care of the fallback, but that code would be subtle and we got
vfs_copy_file_range() logic wrong too many times already.
Instead, add a flag to explicitly request vfs_copy_file_range() to
perform only generic_copy_file_range() and let nfsd and ksmbd use this
flag only in the fallback path.
This choise keeps the logic changes to minimum in the non-nfsd/ksmbd code
paths to reduce the risk of further regressions.
Fixes: 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs copies")
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.1-2022-11-23:
amdgpu:
- DCN 3.1.4 fixes
- DP MST DSC deadlock fixes
- HMM userptr fixes
- Fix Aldebaran CU occupancy reporting
- GFX11 fixes
- PSP suspend/resume fix
- DCE12 KASAN fix
- DCN 3.2.x fixes
- Rotated cursor fix
- SMU 13.x fix
- DELL platform suspend/resume fixes
- VCN4 SR-IOV fix
- Display regression fix for polled connectors
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123143453.8977-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix GVT KVM reference count handling (Sean Christopherson)
- Never purge busy TTM objects (Matthew Auld)
- Fix warn in intel_display_power_*_domain() functions (Imre Deak)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y38u44hb1LZfZC+M@tursulin-desk
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.1-rc7:
- Another amdgpu gang submit fix.
- Use dma_fence_unwrap_for_each when importing sync files.
- Fix race in dma_heap_add().
- Fix use of uninitialized memory in logo.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a5721505-4823-98ef-7d6f-0ea478221391@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc, netfilter and xfrm.
Current release - regressions:
- dccp/tcp: fix bhash2 issues related to WARN_ON() in
inet_csk_get_port()
- l2tp: don't sleep and disable BH under writer-side sk_callback_lock
- eth: ice: fix handling of burst tx timestamps
Current release - new code bugs:
- xfrm: squelch kernel warning in case XFRM encap type is not
available
- eth: mlx5e: fix possible race condition in macsec extended packet
number update routine
Previous releases - regressions:
- neigh: decrement the family specific qlen
- netfilter: fix ipset regression
- rxrpc: fix race between conn bundle lookup and bundle removal
[ZDI-CAN-15975]
- eth: iavf: do not restart tx queues after reset task failure
- eth: nfp: add port from netdev validation for EEPROM access
- eth: mtk_eth_soc: fix potential memory leak in mtk_rx_alloc()
Previous releases - always broken:
- tipc: set con sock in tipc_conn_alloc
- nfc:
- fix potential memory leaks
- fix incorrect sizing calculations in EVT_TRANSACTION
- eth: octeontx2-af: fix pci device refcount leak
- eth: bonding: fix ICMPv6 header handling when receiving IPv6
messages
- eth: prestera: add missing unregister_netdev() in
prestera_port_create()
- eth: tsnep: fix rotten packets
Misc:
- usb: qmi_wwan: add support for LARA-L6"
* tag 'net-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: thunderx: Fix the ACPI memory leak
octeontx2-af: Fix reference count issue in rvu_sdp_init()
net: altera_tse: release phylink resources in tse_shutdown()
virtio_net: Fix probe failed when modprobe virtio_net
net: wwan: t7xx: Fix the ACPI memory leak
octeontx2-pf: Add check for devm_kcalloc
net: enetc: preserve TX ring priority across reconfiguration
net: marvell: prestera: add missing unregister_netdev() in prestera_port_create()
nfc: st-nci: fix incorrect sizing calculations in EVT_TRANSACTION
nfc: st-nci: fix memory leaks in EVT_TRANSACTION
nfc: st-nci: fix incorrect validating logic in EVT_TRANSACTION
Documentation: networking: Update generic_netlink_howto URL
net/cdc_ncm: Fix multicast RX support for CDC NCM devices with ZLP
net: usb: qmi_wwan: add u-blox 0x1342 composition
l2tp: Don't sleep and disable BH under writer-side sk_callback_lock
net: dm9051: Fix missing dev_kfree_skb() in dm9051_loop_rx()
arcnet: fix potential memory leak in com20020_probe()
ipv4: Fix error return code in fib_table_insert()
net: ethernet: mtk_eth_soc: fix memory leak in error path
net: ethernet: mtk_eth_soc: fix resource leak in error path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a bunch of late fixes that just came in, in particular a
longer series for Rockchips devicetree files, but most of those just
address cosmetic errors that were found during the binding validation.
There are a couple of code changes:
- A regression fix to the IXP42x PCI bus
- A fix for a memory leak on optee, and another one for mach-mxs
- Two fixes for the sunxi rsb bus driver, to address problems with
the shutdown logic
The rest are small but important devicetree fixes for a number of
individual boards, addressing issues across all platforms:
- arm global timer on older rockchip SoCs is unstable and needs to be
disabled in favor of a more reliable clocksource
- Corrections to fix bluetooth, mmc, and networking on a few Rockchip
boards
- at91/sam9g20ek UDC needs a pin controller config change
- an omap board runs into mmc probe errors because of regulator nodes
in the wrong place
- imx8mp-evk has a minor inaccuracy with its pin config, but without
user visible impact
- The Allwinner H6 Hantro G2 video decoder needs an IOMMU reference
to prevent the driver from crashing"
* tag 'soc-fixes-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
bus: ixp4xx: Don't touch bit 7 on IXP42x
ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency properties
arm64: dts: imx8mp-evk: correct pcie pad settings
ARM: mxs: fix memory leak in mxs_machine_init()
ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl
tee: optee: fix possible memory leak in optee_register_device()
arm64: dts: allwinner: h6: Add IOMMU reference to Hantro G2
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
bus: sunxi-rsb: Support atomic transfers
bus: sunxi-rsb: Remove the shutdown callback
ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
arm64: dts: rockchip: Fix Pine64 Quartz4-B PMIC interrupt
ARM: dts: am335x-pcm-953: Define fixed regulators in root node
ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name
arm64: dts: rockchip: fix ir-receiver node names
ARM: dts: rockchip: fix ir-receiver node names
arm64: dts: rockchip: fix adc-keys sub node names
ARM: dts: rockchip: fix adc-keys sub node names
arm: dts: rockchip: remove clock-frequency from rtc
arm: dts: rockchip: fix node name for hym8563 rtc
...
|
|
Pull ARM fixes from Russell King:
"Two fixes for 6.1:
- fix stacktraces for tracepoint events in Thumb2 mode
- fix for noMMU ZERO_PAGE() implementation"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation
ARM: 9251/1: perf: Fix stacktraces for tracepoint events in THUMB2 kernels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix two build warnings, a copy_thread() bug, two page table
manipulation bugs, and some trivial cleanups"
* tag 'loongarch-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
docs/zh_CN/LoongArch: Fix wrong description of FPRs Note
LoongArch: Fix unsigned comparison with less than zero
LoongArch: Set _PAGE_DIRTY only if _PAGE_MODIFIED is set in {pmd,pte}_mkwrite()
LoongArch: Set _PAGE_DIRTY only if _PAGE_WRITE is set in {pmd,pte}_mkdirty()
LoongArch: Clear FPU/SIMD thread info flags for kernel thread
LoongArch: SMP: Change prefix from loongson3 to loongson
LoongArch: Combine acpi_boot_table_init() and acpi_boot_init()
LoongArch: Makefile: Use "grep -E" instead of "egrep"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a regression in the lazytime code that was introduced in v6.1-rc1,
and a use-after-free that can be triggered by a maliciously corrupted
file system"
* tag 'ext4_for_linus_stable2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs: do not update freeing inode i_io_list
ext4: fix use-after-free in ext4_ext_shift_extents
|
|
There is no validation of 'e->no_of_channels' which can trigger an
out-of-bounds write in the following 'memset' call. Validate that the
number of channels does not extends beyond the size of the channel list
element.
Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-5-philipturnbull@github.com
|
|
Validate that the IEEE80211_P2P_ATTR_CHANNEL_LIST attribute contains
enough space for a 'struct wilc_attr_oper_ch'. If the attribute is too
small then it can trigger an out-of-bounds write later in the function.
'struct wilc_attr_oper_ch' is variable sized so also check 'attr_len'
does not extend beyond the end of 'buf'.
Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-4-philipturnbull@github.com
|
|
Validate that the IEEE80211_P2P_ATTR_OPER_CHANNEL attribute contains
enough space for a 'struct struct wilc_attr_oper_ch'. If the attribute is
too small then it triggers an out-of-bounds write later in the function.
Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-3-philipturnbull@github.com
|
|
There is no validation of 'offset' which can trigger an out-of-bounds
read when extracting RSN capabilities.
Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-2-philipturnbull@github.com
|
|
Microchip USB Analyzer can activate the internal termination resistors
by setting the "termination" option ON, or OFF to to deactivate them.
As I've observed, both with my oscilloscope and captured USB packets
below, you must send "0" to turn it ON, and "1" to turn it OFF.
From the schematics in the user's guide, I can confirm that you must
drive the CAN_RES signal LOW "0" to activate the resistors.
Reverse the argument value of usb_msg.termination to fix this.
These are the two commands sequence, ON then OFF.
> No. Time Source Destination Protocol Length Info
> 1 0.000000 host 1.3.1 USB 46 URB_BULK out
>
> Frame 1: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> USB URB
> Leftover Capture Data: a80000000000000000000000000000000000a8
>
> No. Time Source Destination Protocol Length Info
> 2 4.372547 host 1.3.1 USB 46 URB_BULK out
>
> Frame 2: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> USB URB
> Leftover Capture Data: a80100000000000000000000000000000000a9
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Link: https://lore.kernel.org/all/20221124152504.125994-1-yashi@spacecubics.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Since the devm_clk_get may return error,
it should be better to add check for the cdev->hclk,
as same as cdev->cclk.
Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/all/20221123063651.26199-1-jiasheng@iscas.ac.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In m_can_pci_remove() and error handling path of m_can_pci_probe(),
m_can_class_free_dev() should be called to free resource allocated by
m_can_class_allocate_dev(), otherwise there will be memleak.
Fixes: cab7ffc0324f ("can: m_can: add PCI glue driver for Intel Elkhart Lake")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/all/1668168684-6390-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In case of register_candev() fails, clear
es58x_dev->netdev[channel_idx] and add free_candev(). Otherwise
es58x_free_netdevs() will unregister the netdev that has never been
registered.
Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Arunachalam Santhanam <Arunachalam.Santhanam@in.bosch.com>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/1668413685-23354-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add the missing free_cc770dev() before return from cc770_isa_probe()
in the register_cc770dev() error handling case.
In addition, remove blanks before goto labels.
Fixes: 7e02e5433e00 ("can: cc770: legacy CC770 ISA bus driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/all/1668168557-6024-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add the missing free_sja1000dev() before return from
sja1000_isa_probe() in the register_sja1000dev() error handling case.
In addition, remove blanks before goto labels.
Fixes: 2a6ba39ad6a2 ("can: sja1000: legacy SJA1000 ISA bus driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/all/1668168521-5540-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
bitfield mode in ocr register has only 2 bits not 3, so correct
the OCR_MODE_MASK define.
Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://lore.kernel.org/all/20221123071636.2407823-1-hs@denx.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
netdev is down
In can327_feed_frame_to_netdev(), it did not free the skb when netdev
is down, and all callers of can327_feed_frame_to_netdev() did not free
allocated skb too. That would trigger skb leak.
Fix it by adding kfree_skb() in can327_feed_frame_to_netdev() when netdev
is down. Not tested, just compiled.
Fixes: 43da2f07622f ("can: can327: CAN/ldisc driver for ELM327 based OBD-II adapters")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/all/20221110061437.411525-1-william.xuanziyang@huawei.com
Reviewed-by: Max Staudt <max@enpas.org>
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Disabling of the unreliable arm-global-timer on earliest
Rockchip SoCs, due to its frequency being bound to the
changing cpu clock.
* tag 'v6.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
|
|
Alexander Gordeev and Gerald Schaefer are covering the whole s390 specific
memory management code. Reflect that by adding a new S390 MM section to
MAINTAINERS.
Also rename the S390 section to S390 ARCHITECTURE to be a bit more precise.
Acked-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The size of the TOD programmable field was incorrectly increased from
four to eight bytes with commit 1a2c5840acf9 ("s390/dump: cleanup CPU
save area handling").
This leads to an elf notes section NT_S390_TODPREG which has a size of
eight instead of four bytes in case of kdump, however even worse is
that the contents is incorrect: it is supposed to contain only the
contents of the TOD programmable field, but in fact contains a mix of
the TOD programmable field (32 bit upper bits) and parts of the CPU
timer register (lower 32 bits).
Fix this by simply changing the size of the todpreg field within the
save area structure. This will implicitly also fix the size of the
corresponding elf notes sections.
This also gets rid of this compile time warning:
in function ‘fortify_memcpy_chk’,
inlined from ‘save_area_add_regs’ at arch/s390/kernel/crash_dump.c:99:2:
./include/linux/fortify-string.h:413:25: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field
(2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 1a2c5840acf9 ("s390/dump: cleanup CPU save area handling")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The ACPI buffer memory (string.pointer) should be freed as the buffer is
not used after returning from bgx_acpi_match_id(), free it to prevent
memory leak.
Fixes: 46b903a01c05 ("net, thunder, bgx: Add support to get MAC address from ACPI.")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20221123082237.1220521-1-liaoyu15@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some PMUs (notably the traditional hardware kind) have boundary issues
with the OS filter. Specifically, it is possible for
perf_event_attr::exclude_kernel=1 events to trigger in-kernel due to
SKID or errata.
This can upset the sigtrap logic some and trigger the WARN.
However, if this invalid sample is the first we must not loose the
SIGTRAP, OTOH if it is the second, it must not override the
pending_addr with a (possibly) invalid one.
Fixes: ca6c21327c6a ("perf: Fix missing SIGTRAPs")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lkml.kernel.org/r/Y3hDYiXwRnJr8RYG@xpf.sh.intel.com
|
|
The perf_event_attr::sigtrap functionality relies on data->addr being
set. However commit 7b0846301531 ("perf: Use sample_flags for addr")
changed this to only initialize data->addr when not 0.
Fixes: 7b0846301531 ("perf: Use sample_flags for addr")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Y3426b4OimE%2FI5po%40hirez.programming.kicks-ass.net
|
|
pci_get_device() will decrease the reference count for the *from*
parameter. So we don't need to call put_device() to decrease the
reference. Let's remove the put_device() in the loop and only decrease
the reference count of the returned 'pdev' for the last loop because it
will not be passed to pci_get_device() as input parameter. We don't need
to check if 'pdev' is NULL because it is already checked inside
pci_dev_put(). Also add pci_dev_put() for the error path.
Fixes: fe1939bb2340 ("octeontx2-af: Add SDP interface support")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Link: https://lore.kernel.org/r/20221123065919.31499-1-wangxiongfeng2@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Call phylink_disconnect_phy() in tse_shutdown() to release the
resources occupied by phylink_of_phy_connect() in the tse_open().
Fixes: fef2998203e1 ("net: altera: tse: convert to phylink")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20221123011617.332302-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
