summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-08Merge tag 'renesas-r9a09g047-dt-binding-defs-tag3' into renesas-clk-for-v6.16Geert Uytterhoeven
Renesas RZ/G3E XSPI and GBETH Core DT Binding Definitions XSPI and Gigabit Ethernet PTP reference core clock DT binding definitions for the Renesas RZ/G3E (R9A09G047) SoC, shared by driver and DT source files.
2025-05-08dt-bindings: clock: renesas,r9a09g047-cpg: Add XSPI and GBETH PTP core clocksBiju Das
Add definitions for XSPI core clock and Gigabit Ethernet PTP reference core clocks in the R9A09G047 CPG DT bindings header file. The clk_spi is modelled as a fixed divider clock with parent clk_spix2 and factor two as both parent and child share same gating bit. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250424081400.135028-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-05-05clk: renesas: Use str_on_off() helperGeert Uytterhoeven
Use the str_on_off() helper instead of open-coding the same operation. Note that this does change the case of the flags, which doesn't matter much for debug messages. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/622f8554dcb815c8fc73511a1a118c1724570fa9.1745840497.git.geert+renesas@glider.be
2025-04-22clk: renesas: r9a09g057: Add clock and reset entries for USB2Lad Prabhakar
Add clock and reset entries for USB2. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250407165202.197570-9-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-22Merge tag 'renesas-r9a09g057-dt-binding-defs-tag3' into renesas-clk-for-v6.16Geert Uytterhoeven
Renesas RZ/V2H USB2 and GBETH Clock DT Binding Definitions USB2 and Gigabit Ethernet clock DT binding definitions for the Renesas RZ/V2H (R9A09G057) SoC, shared by driver and DT source files.
2025-04-22dt-bindings: clock: renesas,r9a09g057-cpg: Add USB2 PHY and GBETH PTP core ↵Lad Prabhakar
clocks Add definitions for USB2 PHY core clocks and Gigabit Ethernet PTP reference core clocks in the R9A09G057 CPG DT bindings header file. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250407165202.197570-8-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-22clk: renesas: rzv2h: Use both CLK_ON and CLK_MON bits for clock state validationLad Prabhakar
Update the clock enable/disable logic to follow the latest hardware manual's guidelines, ensuring that both CLK_ON and CLK_MON bits are used to confirm the clock state. According to the manual, enabling a clock requires setting the CPG_CLK_ON bit and verifying the clock has started using the CPG_CLK_MON bit. Similarly, disabling a clock requires clearing the CPG_CLK_ON bit and confirming the clock has stopped via the CPG_CLK_MON bit. Modify `rzv2h_mod_clock_is_enabled()` to check CLK_MON first and then validate CLK_ON for a more accurate clock status evaluation. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250407165202.197570-6-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-22clk: renesas: rzv2h: Use str_on_off() helper in rzv2h_mod_clock_endisable()Lad Prabhakar
Replace hard-coded "ON"/"OFF" strings with the `str_on_off()` helper in `rzv2h_mod_clock_endisable()`. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250407165202.197570-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-22clk: renesas: rzv2h: Support static dividers without RMWBiju Das
Add support for static dividers that do not require read-modify-write (RMW) operations. This enables the use of the generic clk_divider_ops instead of the custom RMW-based implementation. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Co-developed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250407165202.197570-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-22clk: renesas: rzv2h: Add macro for defining static dividersLad Prabhakar
Unlike dynamic dividers, static dividers do not have a monitor bit. Introduce the `DEF_CSDIV()` macro for defining static dividers, ensuring consistency with existing dynamic divider macros. Additionally, introduce the `CSDIV_NO_MON` macro to indicate the absence of a monitor bit, allowing the monitoring step to be skipped when `mon` is set to `CSDIV_NO_MON`. Note, `rzv2h_cpg_ddiv_clk_register()` will be re-used instead of generic `clk_hw_register_divider_table()` for registering satic dividers as some of the static dividers require RMW operations. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250407165202.197570-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-22clk: renesas: rzv2h: Add support for static mux clocksLad Prabhakar
Add support for `CLK_TYPE_SMUX` to register static muxed clocks on the Renesas RZ/V2H(P) SoC. Extend `cpg_core_clk` to include parent names, mux flags, and a new `smuxed` struct. Update clock registration to handle static mux clocks. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250407165202.197570-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-22clk: renesas: r9a09g047: Add clock and reset entries for GE3DTommaso Merciai
Add CLK_PLLVDO_GPU along with the necessary clock and reset entries for GE3D. Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250402131142.1270701-2-tommaso.merciai.xr@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-22clk: renesas: rzv2h: Fix a typoBiju Das
Fix a typo montor->monitor in kernel-doc comment. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250320093107.36784-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14clk: renesas: rzv2h: Add support for RZ/V2N SoCLad Prabhakar
The clock structure for RZ/V2N is almost identical to RZ/V2H(P) SoC with less IP blocks compared to RZ/V2H(P). For eg: CRU2/3 are present only on the RZ/V2H(P) SoC. Add minimal clock and reset entries required to boot the Renesas RZ/V2N EVK and binds it with the RZ/V2H CPG family driver. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250407191628.323613-9-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14Merge tag 'renesas-r9a09g056-dt-binding-defs-tag1' into renesas-clk-for-v6.16Geert Uytterhoeven
Renesas RZ/V2N DT Bindings and Definitions DT bindings and binding definitions for the Renesas RZ/V2N (R9A09G056) SoC, shared by driver and DT source files.
2025-04-14clk: renesas: rzv2h: Sort compatible list based on SoC part numberLad Prabhakar
Reorder the compatible entries in `rzv2h_cpg_match[]` to follow a numerical sequence based on the SoC part numbers. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250407191628.323613-8-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14dt-bindings: pinctrl: renesas: Document RZ/V2N SoCLad Prabhakar
Add documentation for the pin controller found on the Renesas RZ/V2N (R9A09G056) SoC. The RZ/V2N PFC differs slightly from the RZ/G2L family and is almost identical to the RZ/V2H(P) SoC, except that the RZ/V2H(P) SoC has an additional dedicated pin. To account for this, a SoC-specific compatible string, 'renesas,r9a09g056-pinctrl', is introduced for the RZ/V2N SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250407191628.323613-10-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14dt-bindings: clock: renesas: Document RZ/V2N SoC CPGLad Prabhakar
Document the device tree bindings for the Renesas RZ/V2N (R9A09G056) SoC Clock Pulse Generator (CPG). Update `renesas,rzv2h-cpg.yaml` to include the compatible string for RZ/V2N SoC and adjust the title and description accordingly. Additionally, introduce `renesas,r9a09g056-cpg.h` to define core clock constants for the RZ/V2N SoC. Note the existing RZ/V2H(P) family-specific clock driver will be reused for this SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250407191628.323613-7-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14dt-bindings: soc: renesas: Document SYS for RZ/V2N SoCLad Prabhakar
Add the RZ/V2N (R9A09G056) variant to the existing RZ/V2H(P) System Controller (SYS) binding, as both IPs are very similar. However, they have different SoC IDs, and the RZ/V2N does not have PCIE1 configuration registers, unlike the RZ/V2H(P) SYS IP. To handle these differences, introduce a new compatible string `renesas,r9a09g056-sys`. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250407191628.323613-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14dt-bindings: soc: renesas: Document Renesas RZ/V2N SoC variants and EVKLad Prabhakar
Document the Renesas RZ/V2N (R9A09G056) SoC variants, distinguishing between configurations with and without specific hardware features such as GPU, ISP, and cryptographic extensions. Also, document the "renesas,rzv2n-evk" compatible string for the RZ/V2N EVK board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250407191628.323613-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14clk: renesas: rzv2h: Simplify rzv2h_cpg_assert()/rzv2h_cpg_deassert()Tommaso Merciai
rzv2h_cpg_assert() and rzv2h_cpg_deassert() functions are similar. Share this code via __rzv2h_cpg_assert(). This avoid code duplication. Reported-by: Pavel Machek <pavel@denx.de> Closes: https://lore.kernel.org/cip-dev/Z9QA9rwuXCuVbOXp@duo.ucw.cz/ Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250317083213.371614-4-tommaso.merciai.xr@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14clk: renesas: rzv2h: Improve rzv2h_ddiv_set_rate()Tommaso Merciai
Remove duplicate code into rzv2h_ddiv_set_rate(). Reported-by: Pavel Machek <pavel@denx.de> Closes: https://lore.kernel.org/cip-dev/Z9QBZo4GgtMjid0v@duo.ucw.cz/ Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250317083213.371614-3-tommaso.merciai.xr@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-08clk: renesas: r9a09g057: Add clock and reset entries for GE3DLad Prabhakar
Add PLLGPU along with the necessary clock and reset entries for GE3D. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250309211402.80886-6-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-08clk: renesas: rzv2h: Rename PLL field macros for consistencyLad Prabhakar
Rename PLL field extraction macros to include the associated register name (`CPG_PLL_CLK1` or `CPG_PLL_CLK2`) to maintain consistency with other PLL register macros. Update all corresponding macro references accordingly. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250309211402.80886-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-08clk: renesas: rzv2h: Add support for enabling PLLsLad Prabhakar
Some RZ/V2H(P) SoC variants do not have a GPU, resulting in PLLGPU being disabled by default in TF-A. Add support for enabling PLL clocks in the RZ/V2H(P) CPG driver to manage this. Introduce `is_enabled` and `enable` callbacks to handle PLL state transitions. With the `enable` callback, PLLGPU will be turned ON only when the GPU node is enabled; otherwise, it will remain off. Define new macros for PLL standby and monitor registers to facilitate this process. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250309211402.80886-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-08clk: renesas: rzv2h: Remove unused `type` field from `struct pll_clk`Lad Prabhakar
Remove the redundant `type` field from `struct pll_clk`, as it is not used in the PLL clock handling logic. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250309211402.80886-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-08clk: renesas: rzv2h: Refactor PLL configuration handlingLad Prabhakar
Refactor PLL handling by introducing a `struct pll` to encapsulate PLL configuration parameters, ensuring consistency with the existing dynamic divider structure. Introduce the `PLL_PACK()` macro to simplify PLL structure initialization and update the `DEF_PLL()` macro to use the new `pll` structure. Modify relevant clock register functions to utilize the structured PLL data instead of raw configuration values. This refactoring improves code readability, maintainability, and alignment with the existing clock configuration approach. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250309211402.80886-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-06Linux 6.15-rc1v6.15-rc1Linus Torvalds
2025-04-06tools/include: make uapi/linux/types.h usable from assemblyThomas Weißschuh
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when included from assembly code. Mirror this behaviour in the tools/ variant. Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the toolchain automatically. Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/ Fixes: c9fbaa879508 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-04-06Merge tag 'turbostat-2025.05.06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - support up to 8192 processors - add cpuidle governor debug telemetry, disabled by default - update default output to exclude cpuidle invocation counts - bug fixes * tag 'turbostat-2025.05.06' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: v2025.05.06 tools/power turbostat: disable "cpuidle" invocation counters, by default tools/power turbostat: re-factor sysfs code tools/power turbostat: Restore GFX sysfs fflush() call tools/power turbostat: Document GNR UncMHz domain convention tools/power turbostat: report CoreThr per measurement interval tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192 tools/power turbostat: Add idle governor statistics reporting tools/power turbostat: Fix names matching tools/power turbostat: Allow Zero return value for some RAPL registers tools/power turbostat: Clustered Uncore MHz counters should honor show/hide options
2025-04-06Merge tag 'soundwire-6.15-rc1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire fix from Vinod Koul: - add missing config symbol CONFIG_SND_HDA_EXT_CORE required for asoc driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT * tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: ASoC: SOF: Intel: Let SND_SOF_SOF_HDA_SDW_BPT select SND_HDA_EXT_CORE
2025-04-06tools/power turbostat: v2025.05.06Len Brown
Support up to 8192 processors Add cpuidle governor debug telemetry, disabled by default Update default output to exclude cpuidle invocation counts Bug fixes Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: disable "cpuidle" invocation counters, by defaultLen Brown
Create "pct_idle" counter group, the sofware notion of residency so it can now be singled out, independent of other counter groups. Create "cpuidle" group, the cpuidle invocation counts. Disable "cpuidle", by default. Create "swidle" = "cpuidle" + "pct_idle". Undocument "sysfs", the old name for "swidle", but keep it working for backwards compatibilty. Create "hwidle", all the HW idle counters Modify "idle", enabled by default "idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle") Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06Merge tag 'perf-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fix from Ingo Molnar: "Fix a perf events time accounting bug" * tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix child_total_time_enabled accounting bug at task exit
2025-04-06Merge tag 'sched-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: - Fix a nonsensical Kconfig combination - Remove an unnecessary rseq-notification * tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq: Eliminate useless task_work on execve sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
2025-04-06Disable SLUB_TINY for build testingLinus Torvalds
... and don't error out so hard on missing module descriptions. Before commit 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()") we used to warn about missing module descriptions, but only when building with extra warnigns (ie 'W=1'). After that commit the warning became an unconditional hard error. And it turns out not all modules have been converted despite the claims to the contrary. As reported by Damian Tometzki, the slub KUnit test didn't have a module description, and apparently nobody ever really noticed. The reason nobody noticed seems to be that the slub KUnit tests get disabled by SLUB_TINY, which also ends up disabling a lot of other code, both in tests and in slub itself. And so anybody doing full build tests didn't actually see this failre. So let's disable SLUB_TINY for build-only tests, since it clearly ends up limiting build coverage. Also turn the missing module descriptions error back into a warning, but let's keep it around for non-'W=1' builds. Reported-by: Damian Tometzki <damian@riscv-rocks.de> Link: https://lore.kernel.org/all/01070196099fd059-e8463438-7b1b-4ec8-816d-173874be9966-000000@eu-central-1.amazonses.com/ Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Fixes: 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-04-06tools/power turbostat: re-factor sysfs codeLen Brown
Probe cpuidle "sysfs" residency and counts separately, since soon we will make one disabled on, and the other disabled off. Clarify that some BIC (build-in-counters) are actually "groups". since we're about to re-name some of those groups. no functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: Restore GFX sysfs fflush() callZhang Rui
Do fflush() to discard the buffered data, before each read of the graphics sysfs knobs. Fixes: ba99a4fc8c24 ("tools/power turbostat: Remove unnecessary fflush() call") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: Document GNR UncMHz domain conventionLen Brown
Document that on Intel Granite Rapids Systems, Uncore domains 0-2 are CPU domains, and uncore domains 3-4 are IO domains. Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: report CoreThr per measurement intervalLen Brown
The CoreThr column displays total thermal throttling events since boot time. Change it to report events during the measurement interval. This is more useful for showing a user the current conditions. Total events since boot time are still available to the user via /sys/devices/system/cpu/cpu*/thermal_throttle/* Document CoreThr on turbostat.8 Fixes: eae97e053fe30 ("turbostat: Support thermal throttle count print") Reported-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: Chen Yu <yu.c.chen@intel.com>
2025-04-06tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192Justin Ernst
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output: "turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151" A similar error appears with the use of turbostat --cpu when the inputted cpu range contains a cpu number >= 1024: # turbostat -c 1100-1151 "--cpu 1100-1151" malformed ... Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS. It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low. For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS brings support for parsing cpu numbers >= 1024. Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64. Signed-off-by: Justin Ernst <justin.ernst@hpe.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06Merge tag 'timers-cleanups-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A set of final cleanups for the timer subsystem: - Convert all del_timer[_sync]() instances over to the new timer_delete[_sync]() API and remove the legacy wrappers. Conversion was done with coccinelle plus some manual fixups as coccinelle chokes on scoped_guard(). - The final cleanup of the hrtimer_init() to hrtimer_setup() conversion. This has been delayed to the end of the merge window, so that all patches which have been merged through other trees are in mainline and all new users are catched. Doing this right before rc1 ensures that new code which is merged post rc1 is not introducing new instances of the original functionality" * tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing/timers: Rename the hrtimer_init event to hrtimer_setup hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack() hrtimers: Rename debug_init() to debug_setup() hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper() hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns() hrtimers: Make callback function pointer private hrtimers: Merge __hrtimer_init() into __hrtimer_setup() hrtimers: Switch to use __htimer_setup() hrtimers: Delete hrtimer_init() treewide: Convert new and leftover hrtimer_init() users treewide: Switch/rename to timer_delete[_sync]()
2025-04-06Merge tag 'irq-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more irq updates from Thomas Gleixner: "A set of updates for the interrupt subsystem: - A treewide cleanup for the irq_domain code, which makes the naming consistent and gets rid of the original oddity of naming domains 'host'. This is a trivial mechanical change and is done late to ensure that all instances have been catched and new code merged post rc1 wont reintroduce new instances. - A trivial consistency fix in the migration code The recent introduction of irq_force_complete_move() in the core code, causes a problem for the nostalgia crowd who maintains ia64 out of tree. The code assumes that hierarchical interrupt domains are enabled and dereferences irq_data::parent_data unconditionally. That works in mainline because both architectures which enable that code have hierarchical domains enabled. Though it breaks the ia64 build, which enables the functionality, but does not have hierarchical domains. While it's not really a problem for mainline today, this unconditional dereference is inconsistent and trivially fixable by using the existing helper function irqd_get_parent_data(), which has the appropriate #ifdeffery in place" * tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move() irqdomain: Stop using 'host' for domain irqdomain: Rename irq_get_default_host() to irq_get_default_domain() irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
2025-04-06Merge tag 'timers-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A revert to fix a adjtimex() regression: The recent change to prevent that time goes backwards for the coarse time getters due to immediate multiplier adjustments via adjtimex(), changed the way how the timekeeping core treats that. That change result in a regression on the adjtimex() side, which is user space visible: 1) The forwarding of the base time moves the update out of the original period and establishes a new one. That's changing the behaviour of the [PF]LL control, which user space expects to be applied periodically. 2) The clearing of the accumulated NTP error due to #1, changes the behaviour as well. An attempt to delay the multiplier/frequency update to the next tick did not solve the problem as userspace expects that the multiplier or frequency updates are in effect, when the syscall returns. There is a different solution for the coarse time problem available, so revert the offending commit to restore the existing adjtimex() behaviour" * tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "timekeeping: Fix possible inconsistencies in _COARSE clockids"
2025-04-06Merge tag 'sh-for-v6.15-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from John Paul Adrian Glaubitz: "One important fix and one small configuration update. The first patch by Artur Rojek fixes an issue with the J2 firmware loader not being able to find the location of the device tree blob due to insufficient alignment of the .bss section which rendered J2 boards unbootable. The second patch by Johan Korsnes updates the defconfigs on sh to drop the CONFIG_NET_CLS_TCINDEX configuration option which became obsolete after 8c710f75256b ("net/sched: Retire tcindex classifier"). Summary: - sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX - sh: Align .bss section padding to 8-byte boundary" * tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX sh: Align .bss section padding to 8-byte boundary
2025-04-05Merge tag 'kbuild-v6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Improve performance in gendwarfksyms - Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS - Support CONFIG_HEADERS_INSTALL for ARCH=um - Use more relative paths to sources files for better reproducibility - Support the loong64 Debian architecture - Add Kbuild bash completion - Introduce intermediate vmlinux.unstripped for architectures that need static relocations to be stripped from the final vmlinux - Fix versioning in Debian packages for -rc releases - Treat missing MODULE_DESCRIPTION() as an error - Convert Nios2 Makefiles to use the generic rule for built-in DTB - Add debuginfo support to the RPM package * tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits) kbuild: rpm-pkg: build a debuginfo RPM kconfig: merge_config: use an empty file as initfile nios2: migrate to the generic rule for built-in DTB rust: kbuild: skip `--remap-path-prefix` for `rustdoc` kbuild: pacman-pkg: hardcode module installation path kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally modpost: require a MODULE_DESCRIPTION() kbuild: make all file references relative to source root x86: drop unnecessary prefix map configuration kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS kbuild: Add a help message for "headers" kbuild: deb-pkg: remove "version" variable in mkdebian kbuild: deb-pkg: fix versioning for -rc releases Documentation/kbuild: Fix indentation in modules.rst example x86: Get rid of Makefile.postlink kbuild: Create intermediate vmlinux build with relocations preserved kbuild: Introduce Kconfig symbol for linking vmlinux with relocations kbuild: link-vmlinux.sh: Make output file name configurable kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y Revert "kheaders: Ignore silly-rename files" ...
2025-04-05Merge tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes, mostly from the end of last week, this week was very quiet, maybe you scared everyone away. It's mostly amdgpu, and xe, with some i915, adp and bridge bits, since I think this is overly quiet I'd expect rc2 to be a bit more lively. bridge: - tda998x: Select CONFIG_DRM_KMS_HELPER amdgpu: - Guard against potential division by 0 in fan code - Zero RPM support for SMU 14.0.2 - Properly handle SI and CIK support being disabled - PSR fixes - DML2 fixes - DP Link training fix - Vblank fixes - RAS fixes - Partitioning fix - SDMA fix - SMU 13.0.x fixes - Rom fetching fix - MES fixes - Queue reset fix xe: - Fix NULL pointer dereference on error path - Add missing HW workaround for BMG - Fix survivability mode not triggering - Fix build warning when DRM_FBDEV_EMULATION is not set i915: - Bounds check for scalers in DSC prefill latency computation - Fix build by adding a missing include adp: - Fix error handling in plane setup" # -----BEGIN PGP SIGNATURE----- * tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel: (34 commits) drm/i2c: tda998x: select CONFIG_DRM_KMS_HELPER drm/amdgpu/gfx12: fix num_mec drm/amdgpu/gfx11: fix num_mec drm/amd/pm: Add gpu_metrics_v1_8 drm/amdgpu: Prefer shadow rom when available drm/amd/pm: Update smu metrics table for smu_v13_0_6 drm/amd/pm: Remove host limit metrics support Remove unnecessary firmware version check for gc v9_4_2 drm/amdgpu: stop unmapping MQD for kernel queues v3 Revert "drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA" drm/amdgpu: Parse all deferred errors with UMC aca handle drm/amdgpu: Update ta ras block drm/amdgpu: Add NPS2 to DPX compatible mode drm/amdgpu: Use correct gfx deferred error count drm/amd/display: Actually do immediate vblank disable drm/amd/display: prevent hang on link training fail Revert "drm/amd/display: dml2 soc dscclk use DPM table clk setting" drm/amd/display: Increase vblank offdelay for PSR panels drm/amd: Handle being compiled without SI or CIK support better drm/amd/pm: Add zero RPM enabled OD setting support for SMU14.0.2 ...
2025-04-06kbuild: rpm-pkg: build a debuginfo RPMUday Shankar
The rpm-pkg make target currently suffers from a few issues related to debuginfo: 1. debuginfo for things built into the kernel (vmlinux) is not available in any RPM produced by make rpm-pkg. This makes using tools like systemtap against a make rpm-pkg kernel impossible. 2. debug source for the kernel is not available. This means that commands like 'disas /s' in gdb, which display source intermixed with assembly, can only print file names/line numbers which then must be painstakingly resolved to actual source in a separate editor. 3. debuginfo for modules is available, but it remains bundled with the .ko files that contain module code, in the main kernel RPM. This is a waste of space for users who do not need to debug the kernel (i.e. most users). Address all of these issues by additionally building a debuginfo RPM when the kernel configuration allows for it, in line with standard patterns followed by RPM distributors. With these changes: 1. systemtap now works (when these changes are backported to 6.11, since systemtap lags a bit behind in compatibility), as verified by the following simple test script: # stap -e 'probe kernel.function("do_sys_open").call { printf("%s\n", $$parms); }' dfd=0xffffffffffffff9c filename=0x7fe18800b160 flags=0x88800 mode=0x0 ... 2. disas /s works correctly in gdb, with source and disassembly interspersed: # gdb vmlinux --batch -ex 'disas /s blk_op_str' Dump of assembler code for function blk_op_str: block/blk-core.c: 125 { 0xffffffff814c8740 <+0>: endbr64 127 128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op]) 0xffffffff814c8744 <+4>: mov $0xffffffff824a7378,%rax 0xffffffff814c874b <+11>: cmp $0x23,%edi 0xffffffff814c874e <+14>: ja 0xffffffff814c8768 <blk_op_str+40> 0xffffffff814c8750 <+16>: mov %edi,%edi 126 const char *op_str = "UNKNOWN"; 0xffffffff814c8752 <+18>: mov $0xffffffff824a7378,%rdx 127 128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op]) 0xffffffff814c8759 <+25>: mov -0x7dfa0160(,%rdi,8),%rax 126 const char *op_str = "UNKNOWN"; 0xffffffff814c8761 <+33>: test %rax,%rax 0xffffffff814c8764 <+36>: cmove %rdx,%rax 129 op_str = blk_op_name[op]; 130 131 return op_str; 132 } 0xffffffff814c8768 <+40>: jmp 0xffffffff81d01360 <__x86_return_thunk> End of assembler dump. 3. The size of the main kernel package goes down substantially, especially if many modules are built (quite typical). Here is a comparison of installed size of the kernel package (configured with allmodconfig, dwarf4 debuginfo, and module compression turned off) before and after this patch: # rpm -qi kernel-6.13* | grep -E '^(Version|Size)' Version : 6.13.0postpatch+ Size : 1382874089 Version : 6.13.0prepatch+ Size : 17870795887 This is a ~92% size reduction. Note that a debuginfo package can only be produced if the following configs are set: - CONFIG_DEBUG_INFO=y - CONFIG_MODULE_COMPRESS=n - CONFIG_DEBUG_INFO_SPLIT=n The first of these is obvious - we can't produce debuginfo if the build does not generate it. The second two requirements can in principle be removed, but doing so is difficult with the current approach, which uses a generic rpmbuild script find-debuginfo.sh that processes all packaged executables. If we want to remove those requirements the best path forward is likely to add some debuginfo extraction/installation logic to the modules_install target (controllable by flags). That way, it's easier to operate on modules before they're compressed, and the logic can be reused by all packaging targets. Signed-off-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-04-06kconfig: merge_config: use an empty file as initfileDaniel Gomez
The scripts/kconfig/merge_config.sh script requires an existing $INITFILE (or the $1 argument) as a base file for merging Kconfig fragments. However, an empty $INITFILE can serve as an initial starting point, later referenced by the KCONFIG_ALLCONFIG Makefile variable if -m is not used. This variable can point to any configuration file containing preset config symbols (the merged output) as stated in Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will contain just the merge output requiring the user to run make (i.e. KCONFIG_ALLCONFIG=<$INITFILE> make <allnoconfig/alldefconfig> or make olddefconfig). Instead of failing when `$INITFILE` is missing, create an empty file and use it as the starting point for merges. Signed-off-by: Daniel Gomez <da.gomez@samsung.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-04-06nios2: migrate to the generic rule for built-in DTBMasahiro Yamada
Commit 654102df2ac2 ("kbuild: add generic support for built-in boot DTBs") introduced generic support for built-in DTBs. Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled. To keep consistency across architectures, this commit also renames CONFIG_NIOS2_DTB_SOURCE_BOOL to CONFIG_BUILTIN_DTB, and CONFIG_NIOS2_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 08:42:26 +0000