summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-06-18net: hostess_sv11: remove dead codePeng Li
This patch removes the dead code. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18net: hostess_sv11: fix the code style issue about switch and casePeng Li
According to the chackpatch.pl, switch and case should be at the same indent. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18net: hostess_sv11: remove trailing whitespacePeng Li
This patch removes trailing whitespace. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18net: hostess_sv11: move out assignment in if conditionPeng Li
Should not use assignment in if condition. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18net: hostess_sv11: fix the code style issue about "foo* bar"Peng Li
Fix the checkpatch error as "foo* bar" should be "foo *bar". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18Merge branch 'mptcp-dss-checksums'David S. Miller
Mat Martineau says: ==================== mptcp: DSS checksum support RFC 8684 defines a DSS checksum feature that allows MPTCP to detect middlebox interference with the MPTCP DSS header and the portion of the data stream associated with that header. So far, the MPTCP implementation in the Linux kernel has not supported this feature. This patch series adds DSS checksum support. By default, the kernel will not request checksums when sending SYN or SYN/ACK packets for MPTCP connections. Outgoing checksum requests can be enabled with a per-namespace net.mptcp.checksum_enabled sysctl. MPTCP connections will now proceed with DSS checksums when the peer requests them, whether the sysctl is enabled or not. Patches 1-5 add checksum bits to the outgoing SYN, SYN/ACK, and data packet headers. This includes calculating the checksum using a range of data and the MPTCP DSS mapping for that data. Patches 6-10 handle the checksum request in the SYN or SYN/ACK, and receiving and verifying the DSS checksum on data packets. Patch 11 adjusts the MPTCP-level retransmission process for checksum compatibility. Patches 12-14 add checksum-related MIBs, the net.mptcp.checksum_enabled sysctl, and a checksum field to debug trace output. Patches 15 & 16 add selftests. The series is slightly longer than the preferred 15-patch limit that patchwork warns about. I do try to stay below that whenever possible - this series does implement one feature and is, I think, cohesive enough to justify keeping it together. If it's at all problematic please let me know! A trivial merge conflict with net/master is introduced in patch 15: a commit in net/master removes a couple of nearby lines of code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18selftests: mptcp: enable checksum in mptcp_join.shGeliang Tang
This patch added a new argument "-C" for the mptcp_join.sh script to set the sysctl checksum_enabled to 1 in ns1 and ns2 to enable the data checksum. In chk_join_nr, check the counter of the mib for the data checksum. Also added a new argument "-S" for the mptcp_join.sh script to start the test cases that verify the checksum handshake: * Sender and listener both have checksums off * Sender and listener both have checksums on * Sender checksums off, listener checksums on * Sender checksums on, listener checksums off The output looks like this: 01 checksum test 0 0 sum[ ok ] - csum [ ok ] 02 checksum test 1 1 sum[ ok ] - csum [ ok ] 03 checksum test 0 1 sum[ ok ] - csum [ ok ] 04 checksum test 1 0 sum[ ok ] - csum [ ok ] 05 no JOIN syn[ ok ] - synack[ ok ] - ack[ ok ] sum[ ok ] - csum [ ok ] 06 single subflow, limited by client syn[ ok ] - synack[ ok ] - ack[ ok ] sum[ ok ] - csum [ ok ] Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18selftests: mptcp: enable checksum in mptcp_connect.shGeliang Tang
This patch added a new argument "-C" for the mptcp_connect.sh script to set the sysctl checksum_enabled to 1 in ns1, ns2, ns3 and ns4 to enable the data checksum. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: dump csum fields in mptcp_dump_mpextGeliang Tang
In mptcp_dump_mpext, dump the csum fields, csum and csum_reqd in struct mptcp_dump_mpext too. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: add a new sysctl checksum_enabledGeliang Tang
This patch added a new sysctl, named checksum_enabled, to control whether DSS checksum can be enabled. Acked-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: add the mib for data checksumGeliang Tang
This patch added the mib for the data checksum, MPTCP_MIB_DATACSUMERR. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: tune re-injections for csum enabled modePaolo Abeni
If the MPTCP-level checksum is enabled, on re-injections we must spool a complete DSS, or the receive side will not be able to compute the csum and process any data. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: validate the data checksumPaolo Abeni
This patch added three new members named data_csum, csum_len and map_csum in struct mptcp_subflow_context, implemented a new function named mptcp_validate_data_checksum(). If the current mapping is valid and csum is enabled traverse the later pending skbs and compute csum incrementally till the whole mapping has been covered. If not enough data is available in the rx queue, return MAPPING_EMPTY - that is, no data. Next subflow_data_ready invocation will trigger again csum computation. When the full DSS is available, validate the csum and return to the caller an appropriate error code, to trigger subflow reset of fallback as required by the RFC. Additionally: - if the csum prevence in the DSS don't match the negotiated value e.g. csum present, but not requested, return invalid mapping to trigger subflow reset. - keep some csum state, to avoid re-compute the csum on the same data when multiple rx queue traversal are required. - clean-up the uncompleted mapping from the receive queue on close, to allow proper subflow disposal Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: receive checksum for DSSGeliang Tang
In mptcp_parse_option, adjust the expected_opsize, and always parse the data checksum value from the receiving DSS regardless of csum presence. Then save it in mp_opt->csum. Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: receive checksum for MP_CAPABLE with dataGeliang Tang
This patch added a new member named csum in struct mptcp_options_received. When parsing the MP_CAPABLE with data, if the checksum is enabled, adjust the expected_opsize. If the receiving option length matches the length with the data checksum, get the checksum value and save it in mp_opt->csum. And in mptcp_incoming_options, pass it to mpext->csum. We always parse any csum/nocsum combination and delay the presence check to later code, to allow reset if missing. Additionally, in the TX path, use the newly introduce ext field to avoid MPTCP csum recomputation on TCP retransmission and unneeded csum update on when setting the data fin_flag. Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: add csum_reqd in mptcp_options_receivedGeliang Tang
This patch added a new flag csum_reqd in struct mptcp_options_received, if the flag MPTCP_CAP_CHECKSUM_REQD is set in the receiving MP_CAPABLE suboption, set this flag. In mptcp_sk_clone and subflow_finish_connect, if the csum_reqd flag is set, enable the msk->csum_enabled flag. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: add sk parameter for mptcp_get_optionsGeliang Tang
This patch added a new parameter name sk in mptcp_get_options(). Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: send out checksum for DSSGeliang Tang
In mptcp_write_options, if the checksum is enabled, adjust the option length and send out the data checksum with DSS suboption. Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: send out checksum for MP_CAPABLE with dataGeliang Tang
If the checksum is enabled, send out the data checksum with the MP_CAPABLE suboption with data. In mptcp_established_options_mp, save the data checksum in opts->ext_copy.csum. In mptcp_write_options, adjust the option length and send it out with the MP_CAPABLE suboption. Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: add csum_reqd in mptcp_out_optionsGeliang Tang
This patch added a new member csum_reqd in struct mptcp_out_options and struct mptcp_subflow_request_sock. Initialized it with the helper function mptcp_is_checksum_enabled(). In mptcp_write_options, if this field is enabled, send out the MP_CAPABLE suboption with the MPTCP_CAP_CHECKSUM_REQD flag. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: generate the data checksumGeliang Tang
This patch added a new member named csum in struct mptcp_ext, implemented a new function named mptcp_generate_data_checksum(). Generate the data checksum in mptcp_sendmsg_frag, save it in mpext->csum. Note that we must generate the csum for zero window probe, too. Do the csum update incrementally, to avoid multiple csum computation when the data is appended to existing skb. Note that in a later patch we will skip unneeded csum related operation. Changes not included here to keep the delta small. Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18mptcp: add csum_enabled in mptcp_sockGeliang Tang
This patch added a new member named csum_enabled in struct mptcp_sock, used a dummy mptcp_is_checksum_enabled() helper to initialize it. Also added a new member named mptcpi_csum_enabled in struct mptcp_info to expose the csum_enabled flag. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18Merge branch 'seg6.end.dt6'David S. Miller
Andrea Mayer says: ==================== seg6: add support for SRv6 End.DT46 Behavior SRv6 End.DT46 Behavior is defined in the IETF RFC 8986 [1] along with SRv6 End.DT4 and End.DT6 Behaviors. The proposed End.DT46 implementation is meant to support the decapsulation of both IPv4 and IPv6 traffic coming from a *single* SRv6 tunnel. The SRv6 End.DT46 Behavior greatly simplifies the setup and operations of SRv6 VPNs in the Linux kernel. - patch 1/2 is the core patch that adds support for the SRv6 End.DT46 Behavior; - patch 2/2 adds the selftest for SRv6 End.DT46 Behavior. The patch introducing the new SRv6 End.DT46 Behavior in iproute2 will follow shortly. Comments, suggestions and improvements are very welcome as always! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18selftests: seg6: add selftest for SRv6 End.DT46 BehaviorAndrea Mayer
this selftest is designed for evaluating the new SRv6 End.DT46 Behavior used, in this example, for implementing IPv4/IPv6 L3 VPN use cases. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18seg6: add support for SRv6 End.DT46 BehaviorAndrea Mayer
IETF RFC 8986 [1] includes the definition of SRv6 End.DT4, End.DT6, and End.DT46 Behaviors. The current SRv6 code in the Linux kernel only implements End.DT4 and End.DT6 which can be used respectively to support IPv4-in-IPv6 and IPv6-in-IPv6 VPNs. With End.DT4 and End.DT6 it is not possible to create a single SRv6 VPN tunnel to carry both IPv4 and IPv6 traffic. The proposed End.DT46 implementation is meant to support the decapsulation of IPv4 and IPv6 traffic coming from a single SRv6 tunnel. The implementation of the SRv6 End.DT46 Behavior in the Linux kernel greatly simplifies the setup and operations of SRv6 VPNs. The SRv6 End.DT46 Behavior leverages the infrastructure of SRv6 End.DT{4,6} Behaviors implemented so far, because it makes use of a VRF device in order to force the routing lookup into the associated routing table. To make the End.DT46 work properly, it must be guaranteed that the routing table used for routing lookup operations is bound to one and only one VRF during the tunnel creation. Such constraint has to be enforced by enabling the VRF strict_mode sysctl parameter, i.e.: $ sysctl -wq net.vrf.strict_mode=1 Note that the same approach is used for the SRv6 End.DT4 Behavior and for the End.DT6 Behavior in VRF mode. The command used to instantiate an SRv6 End.DT46 Behavior is straightforward, i.e.: $ ip -6 route add 2001:db8::1 encap seg6local action End.DT46 vrftable 100 dev vrf100. [1] https://www.rfc-editor.org/rfc/rfc8986.html#name-enddt46-decapsulation-and-s ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Performance and impact of SRv6 End.DT46 Behavior on the SRv6 Networking ======================================================================= This patch aims to add the SRv6 End.DT46 Behavior with minimal impact on the performance of SRv6 End.DT4 and End.DT6 Behaviors. In order to verify this, we tested the performance of the newly introduced SRv6 End.DT46 Behavior and compared it with the performance of SRv6 End.DT{4,6} Behaviors, considering both the patched kernel and the kernel before applying the End.DT46 patch (referred to as vanilla kernel). In details, the following decapsulation scenarios were considered: 1.a) IPv6 traffic in SRv6 End.DT46 Behavior on patched kernel; 1.b) IPv4 traffic in SRv6 End.DT46 Behavior on patched kernel; 2.a) SRv6 End.DT6 Behavior (VRF mode) on patched kernel; 2.b) SRv6 End.DT4 Behavior on patched kernel; 3.a) SRv6 End.DT6 Behavior (VRF mode) on vanilla kernel (without the End.DT46 patch); 3.b) SRv6 End.DT4 Behavior on vanilla kernel (without the End.DT46 patch). All tests were performed on a testbed deployed on the CloudLab [2] facilities. We considered IPv{4,6} traffic handled by a single core (at 2.4 GHz on a Xeon(R) CPU E5-2630 v3) on kernel 5.13-rc1 using packets of size ~ 100 bytes. Scenario (1.a): average 684.70 kpps; std. dev. 0.7 kpps; Scenario (1.b): average 711.69 kpps; std. dev. 1.2 kpps; Scenario (2.a): average 690.70 kpps; std. dev. 1.2 kpps; Scenario (2.b): average 722.22 kpps; std. dev. 1.7 kpps; Scenario (3.a): average 690.02 kpps; std. dev. 2.6 kpps; Scenario (3.b): average 721.91 kpps; std. dev. 1.2 kpps; Considering the results for the patched kernel (1.a, 1.b, 2.a, 2.b) we observe that the performance degradation incurred in using End.DT46 rather than End.DT6 and End.DT4 respectively for IPv6 and IPv4 traffic is minimal, around 0.9% and 1.5%. Such very minimal performance degradation is the price to be paid if one prefers to use a single tunnel capable of handling both types of traffic (IPv4 and IPv6). Comparing the results for End.DT4 and End.DT6 under the patched and the vanilla kernel (2.a, 2.b, 3.a, 3.b) we observe that the introduction of the End.DT46 patch has no impact on the performance of End.DT4 and End.DT6. [2] https://www.cloudlab.us Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18Documentation: ACPI: DSD: fix block code commentsIoana Ciornei
Use the '.. code-block:: none' to properly highlight the documented DSDT entries. This also fixes warnings in the documentation build process. Fixes: e71305acd81c ("Documentation: ACPI: DSD: Document MDIO PHY") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18Documentation: ACPI: DSD: include phy.rst in the toctreeIoana Ciornei
Include the new phy.rst into the index of the ACPI support documentation. Fixes: e71305acd81c ("Documentation: ACPI: DSD: Document MDIO PHY") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18net: neterion: vxge: remove redundant continue statementColin Ian King
The continue statement at the end of a for-loop has no effect, invert the if expression and remove the continue. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18drivers: net: netdevsim: fix devlink_trap selftests failingOleksandr Mazur
devlink_trap tests for the netdevsim fail due to misspelled debugfs file name. Change this name, as well as name of callback function, to match the naming as in the devlink itself - 'trap_drop_counter'. Test-results: selftests: drivers/net/netdevsim: devlink_trap.sh TEST: Initialization [ OK ] TEST: Trap action [ OK ] TEST: Trap metadata [ OK ] TEST: Non-existing trap [ OK ] TEST: Non-existing trap action [ OK ] TEST: Trap statistics [ OK ] TEST: Trap group action [ OK ] TEST: Non-existing trap group [ OK ] TEST: Trap group statistics [ OK ] TEST: Trap policer [ OK ] TEST: Trap policer binding [ OK ] TEST: Port delete [ OK ] TEST: Device delete [ OK ] Fixes: a7b3527a43fe ("drivers: net: netdevsim: add devlink trap_drop_counter_get implementation") Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18Merge tag 'arc-5.13-rc7-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - ARCv2 userspace ABI not populating a few registers - Unbork CONFIG_HARDENED_USERCOPY for ARC * tag 'arc-5.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: fix CONFIG_HARDENED_USERCOPY ARCv2: save ABI registers across signal handling
2021-06-18Merge tag 'trace-v5.13-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Have recordmcount check for valid st_shndx otherwise some archs may have invalid references for the mcount location. - Two fixes done for mapping pids to task names. Traces were not showing the names of tasks when they should have. - Fix to trace_clock_global() to prevent it from going backwards * tag 'trace-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do no increment trace_clock_global() by one tracing: Do not stop recording comms if the trace file is being read tracing: Do not stop recording cmdlines when tracing is off recordmcount: Correct st_shndx handling
2021-06-18Merge tag 'printk-for-5.13-fixup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fixup from Petr Mladek: "Fix misplaced EXPORT_SYMBOL(vsprintf)" * tag 'printk-for-5.13-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Move EXPORT_SYMBOL() closer to vprintk definition
2021-06-18Merge tag 'pm-5.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Remove recently added frequency invariance support from the CPPC cpufreq driver, because it has turned out to be problematic and it cannot be fixed properly on time for 5.13 (Viresh Kumar)" * tag 'pm-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "cpufreq: CPPC: Add support for frequency invariance"
2021-06-18Merge tag 'usb-5.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are three small USB fixes for reported problems for 5.13-rc7. They include: - disable autosuspend for a cypress USB hub - fix the battery charger detection for the chipidea driver - fix a kernel panic in the dwc3 driver due to a previous change in 5.13-rc1. All have been in linux-next with no reported problems" * tag 'usb-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: core: hub: Disable autosuspend for Cypress CY7C65632 usb: chipidea: imx: Fix Battery Charger 1.2 CDP detection usb: dwc3: core: fix kernel panic when do reboot
2021-06-18Merge tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Not much happening in fixes land this week only one PR for two amdgpu powergating fixes was waiting for me, maybe something will show up over the weekend, maybe not. amdgpu: - GFX9 and 10 powergating fixes" * tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover full doorbell. drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.
2021-06-18iavf: clean up packet type lookup tableJesse Brandeburg
Remove the unused ptype struct value, which makes table init easier for the zero entries, and use ranged initializer to remove a bunch of code (works with gcc and clang). There is no significant functional change. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-18i40e: clean up packet type lookup tableJesse Brandeburg
Remove the unused ptype struct value, which makes table init easier for the zero entries, and use ranged initializer to remove a bunch of code (works with gcc and clang). There is no significant functional change. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-18ice: report hash type such as L2/L3/L4Jesse Brandeburg
The hardware is reporting the type of the hash used for RSS as a PTYPE field in the receive descriptor. Use this value to set the skb packet hash type by extending the hash type table to cover all 10-bits of possible values (requiring some variables to be changed from u8 to u16), and then use that table to convert to one of the possible values in enum pkt_hash_types. While we're here, remove the unused ptype struct value, which makes table init easier for the zero entries, and use ranged initializer to remove a bunch of code (works with gcc and clang). Without this change, the kernel will recalculate the hash in software, which can consume extra CPU cycles. Co-developed-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-18PCI: aardvark: Fix kernel panic during PIO transferPali Rohár
Trying to start a new PIO transfer by writing value 0 in PIO_START register when previous transfer has not yet completed (which is indicated by value 1 in PIO_START) causes an External Abort on CPU, which results in kernel panic: SError Interrupt on CPU0, code 0xbf000002 -- SError Kernel panic - not syncing: Asynchronous SError Interrupt To prevent kernel panic, it is required to reject a new PIO transfer when previous one has not finished yet. If previous PIO transfer is not finished yet, the kernel may issue a new PIO request only if the previous PIO transfer timed out. In the past the root cause of this issue was incorrectly identified (as it often happens during link retraining or after link down event) and special hack was implemented in Trusted Firmware to catch all SError events in EL3, to ignore errors with code 0xbf000002 and not forwarding any other errors to kernel and instead throw panic from EL3 Trusted Firmware handler. Links to discussion and patches about this issue: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50 https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/ https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/ https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541 But the real cause was the fact that during link retraining or after link down event the PIO transfer may take longer time, up to the 1.44s until it times out. This increased probability that a new PIO transfer would be issued by kernel while previous one has not finished yet. After applying this change into the kernel, it is possible to revert the mentioned TF-A hack and SError events do not have to be caught in TF-A EL3. Link: https://lore.kernel.org/r/20210608203655.31228-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # 7fbcb5da811b ("PCI: aardvark: Don't rely on jiffies while holding spinlock")
2021-06-18PCI: Add AMD RS690 quirk to enable 64-bit DMAMikel Rychliski
Although the AMD RS690 chipset has 64-bit DMA support, BIOS implementations sometimes fail to configure the memory limit registers correctly. The Acer F690GVM mainboard uses this chipset and a Marvell 88E8056 NIC. The sky2 driver programs the NIC to use 64-bit DMA, which will not work: sky2 0000:02:00.0: error interrupt status=0x8 sky2 0000:02:00.0 eth0: tx timeout sky2 0000:02:00.0 eth0: transmit ring 0 .. 22 report=0 done=0 Other drivers required by this mainboard either don't support 64-bit DMA, or have it disabled using driver specific quirks. For example, the ahci driver has quirks to enable or disable 64-bit DMA depending on the BIOS version (see ahci_sb600_enable_64bit() in ahci.c). This ahci quirk matches against the SB600 SATA controller, but the real issue is almost certainly with the RS690 PCI host that it was commonly attached to. To avoid this issue in all drivers with 64-bit DMA support, fix the configuration of the PCI host. If the kernel is aware of physical memory above 4GB, but the BIOS never configured the PCI host with this information, update the registers with our values. [bhelgaas: drop PCI_DEVICE_ID_ATI_RS690 definition] Link: https://lore.kernel.org/r/20210611214823.4898-1-mikel@mikelr.com Signed-off-by: Mikel Rychliski <mikel@mikelr.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-06-18PCI: Add ACS quirk for Broadcom BCM57414 NICSriharsha Basavapatna
The Broadcom BCM57414 NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions, so it is safe to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [bhelgaas: commit log] Link: https://lore.kernel.org/r/1621645997-16251-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark AMD Navi14 GPU ATS as brokenEvan Quan
Observed unexpected GPU hang during runpm stress test on 0x7341 rev 0x00. Further debugging shows broken ATS is related. Disable ATS on this part. Similar issues on other devices: a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms") 45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken") 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") Suggested-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20210602021255.939090-1-evan.quan@amd.com Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Work around Huawei Intelligent NIC VF FLR erratumChiqijun
pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the FLR to complete. It assumes the FLR is complete when a config read returns valid data. When we do an FLR on several Huawei Intelligent NIC VFs at the same time, firmware on the NIC processes them serially. The VF may respond to config reads before the firmware has completed its reset processing. If we bind a driver to the VF (e.g., by assigning the VF to a virtual machine) in the interval between the successful config read and completion of the firmware reset processing, the NIC VF driver may fail to load. Prevent this driver failure by waiting for the NIC firmware to complete its reset processing. Not all NIC firmware supports this feature. [bhelgaas: commit log] Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com Signed-off-by: Chiqijun <chiqijun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark some NVIDIA GPUs to avoid bus resetShanker Donthineni
Some NVIDIA GPU devices do not work with SBR. Triggering SBR leaves the device inoperable for the current system boot. It requires a system hard-reboot to get the GPU device back to normal operating condition post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the issue. This issue will be fixed in the next generation of hardware. Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@gmail.com Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark TI C667X to avoid bus resetAntti Järvinen
Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS automatically disables LTSSM when Secondary Bus Reset is received and device stops working. Prevent bus reset for these devices. With this change, the device can be assigned to VMs with VFIO, but it will leak state between VMs. Reference: https://e2e.ti.com/support/processors/f/791/t/954382 Link: https://lore.kernel.org/r/20210315102606.17153-1-antti.jarvinen@gmail.com Signed-off-by: Antti Järvinen <antti.jarvinen@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: stable@vger.kernel.org
2021-06-18PCI: tegra194: Fix MCFG quirk build regressionsJon Hunter
7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata") caused a few build regressions: - 7f100744749e removed the Makefile rule for CONFIG_PCIE_TEGRA194, so pcie-tegra.c can no longer be built as a module. Restore that rule. - 7f100744749e added "#ifdef CONFIG_PCIE_TEGRA194" around the native driver, but that's only set when the driver is built-in (for a module, CONFIG_PCIE_TEGRA194_MODULE is defined). The ACPI quirk is completely independent of the rest of the native driver, so move the quirk to its own file and remove the #ifdef in the native driver. - 7f100744749e added symbols that are always defined but used only when CONFIG_PCIEASPM, which causes warnings when CONFIG_PCIEASPM is not set: drivers/pci/controller/dwc/pcie-tegra194.c:259:18: warning: ‘event_cntr_data_offset’ defined but not used [-Wunused-const-variable=] drivers/pci/controller/dwc/pcie-tegra194.c:250:18: warning: ‘event_cntr_ctrl_offset’ defined but not used [-Wunused-const-variable=] drivers/pci/controller/dwc/pcie-tegra194.c:243:27: warning: ‘pcie_gen_freq’ defined but not used [-Wunused-const-variable=] Fixes: 7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata") Link: https://lore.kernel.org/r/20210610064134.336781-1-jonathanh@nvidia.com Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2021-06-18PCI: of: Clear 64-bit flag for non-prefetchable memory below 4GBPunit Agrawal
Alexandru and Qu reported this resource allocation failure on ROCKPro64 v2 and ROCK Pi 4B, both based on the RK3399: pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff 64bit] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: BAR 14: no space for [mem size 0x00100000] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] "BAR 14" is the PCI bridge's 32-bit non-prefetchable window, and our PCI allocation code isn't smart enough to allocate it in a host bridge window marked as 64-bit, even though this should work fine. A DT host bridge description includes the windows from the CPU address space to the PCI bus space. On a few architectures (microblaze, powerpc, sparc), the DT may also describe PCI devices themselves, including their BARs. Before 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses"), of_bus_pci_get_flags() ignored the fact that some DT addresses described 64-bit windows and BARs. That was a problem because the virtio virtual NIC has a 32-bit BAR and a 64-bit BAR, and the driver couldn't distinguish them. 9d57e61bf723 set IORESOURCE_MEM_64 for those 64-bit DT ranges, which fixed the virtio driver. But it also set IORESOURCE_MEM_64 for host bridge windows, which exposed the fact that the PCI allocator isn't smart enough to put 32-bit resources in those 64-bit windows. Clear IORESOURCE_MEM_64 from host bridge windows since we don't need that information. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Fixes: 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses") Link: https://lore.kernel.org/r/20210614230457.752811-1-punitagrawal@gmail.com Reported-at: https://lore.kernel.org/lkml/7a1e2ebc-f7d8-8431-d844-41a9c36a8911@arm.com/ Reported-at: https://lore.kernel.org/lkml/YMyTUv7Jsd89PGci@m4/T/#u Reported-by: Alexandru Elisei <alexandru.elisei@arm.com> Reported-by: Qu Wenruo <wqu@suse.com> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com> Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: Punit Agrawal <punitagrawal@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2021-06-18tracing: Do no increment trace_clock_global() by oneSteven Rostedt (VMware)
The trace_clock_global() tries to make sure the events between CPUs is somewhat in order. A global value is used and updated by the latest read of a clock. If one CPU is ahead by a little, and is read by another CPU, a lock is taken, and if the timestamp of the other CPU is behind, it will simply use the other CPUs timestamp. The lock is also only taken with a "trylock" due to tracing, and strange recursions can happen. The lock is not taken at all in NMI context. In the case where the lock is not able to be taken, the non synced timestamp is returned. But it will not be less than the saved global timestamp. The problem arises because when the time goes "backwards" the time returned is the saved timestamp plus 1. If the lock is not taken, and the plus one to the timestamp is returned, there's a small race that can cause the time to go backwards! CPU0 CPU1 ---- ---- trace_clock_global() { ts = clock() [ 1000 ] trylock(clock_lock) [ success ] global_ts = ts; [ 1000 ] <interrupted by NMI> trace_clock_global() { ts = clock() [ 999 ] if (ts < global_ts) ts = global_ts + 1 [ 1001 ] trylock(clock_lock) [ fail ] return ts [ 1001] } unlock(clock_lock); return ts; [ 1000 ] } trace_clock_global() { ts = clock() [ 1000 ] if (ts < global_ts) [ false 1000 == 1000 ] trylock(clock_lock) [ success ] global_ts = ts; [ 1000 ] unlock(clock_lock) return ts; [ 1000 ] } The above case shows to reads of trace_clock_global() on the same CPU, but the second read returns one less than the first read. That is, time when backwards, and this is not what is allowed by trace_clock_global(). This was triggered by heavy tracing and the ring buffer checker that tests for the clock going backwards: Ring buffer clock went backwards: 20613921464 -> 20613921463 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at kernel/trace/ring_buffer.c:3412 check_buffer+0x1b9/0x1c0 Modules linked in: [..] [CPU: 2]TIME DOES NOT MATCH expected:20620711698 actual:20620711697 delta:6790234 before:20613921463 after:20613921463 [20613915818] PAGE TIME STAMP [20613915818] delta:0 [20613915819] delta:1 [20613916035] delta:216 [20613916465] delta:430 [20613916575] delta:110 [20613916749] delta:174 [20613917248] delta:499 [20613917333] delta:85 [20613917775] delta:442 [20613917921] delta:146 [20613918321] delta:400 [20613918568] delta:247 [20613918768] delta:200 [20613919306] delta:538 [20613919353] delta:47 [20613919980] delta:627 [20613920296] delta:316 [20613920571] delta:275 [20613920862] delta:291 [20613921152] delta:290 [20613921464] delta:312 [20613921464] delta:0 TIME EXTEND [20613921464] delta:0 This happened more than once, and always for an off by one result. It also started happening after commit aafe104aa9096 was added. Cc: stable@vger.kernel.org Fixes: aafe104aa9096 ("tracing: Restructure trace_clock_global() to never block") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-18tracing: Do not stop recording comms if the trace file is being readSteven Rostedt (VMware)
A while ago, when the "trace" file was opened, tracing was stopped, and code was added to stop recording the comms to saved_cmdlines, for mapping of the pids to the task name. Code has been added that only records the comm if a trace event occurred, and there's no reason to not trace it if the trace file is opened. Cc: stable@vger.kernel.org Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-18tracing: Do not stop recording cmdlines when tracing is offSteven Rostedt (VMware)
The saved_cmdlines is used to map pids to the task name, such that the output of the tracing does not just show pids, but also gives a human readable name for the task. If the name is not mapped, the output looks like this: <...>-1316 [005] ...2 132.044039: ... Instead of this: gnome-shell-1316 [005] ...2 132.044039: ... The names are updated when tracing is running, but are skipped if tracing is stopped. Unfortunately, this stops the recording of the names if the top level tracer is stopped, and not if there's other tracers active. The recording of a name only happens when a new event is written into a ring buffer, so there is no need to test if tracing is on or not. If tracing is off, then no event is written and no need to test if tracing is off or not. Remove the check, as it hides the names of tasks for events in the instance buffers. Cc: stable@vger.kernel.org Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 16:46:24 +0000