| Age | Commit message (Collapse) | Author |
|---|
|
The "pipe" and "pf" crc sources are in fact the same thing.
Remove the "pf" one.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190214192219.3858-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Limit deboosting and boosting to keep ourselves at the extremes
when in the respective power modes (i.e. slowly decrease frequencies
while in the HIGH_POWER zone and slowly increase frequencies while
in the LOW_POWER zone). On idle, we will hit the timeout and drop
to the next level quickly, and conversely if busy we expect to
hit a waitboost and rapidly switch into max power.
This should improve the UX experience by keeping the GPU clocks higher
than they ostensibly should be (based on simple busyness) by switching
into the INTERACTIVE mode (due to waiting for pageflips) and increasing
clocks via waitboosting. This will incur some additional power, our
saving grace should be rc6 and powergating to keep the extra current
draw in check.
Food for future thought would be deadline scheduling? If we know certain
contexts (high priority compositors) absolutely must hit the next vblank
then we can raise the frequencies ahead of time. Part of this is covered
by per-context frequencies, where userspace is given control over the
frequency range they want the GPU to execute at (for largely the same
problem as this, where the workload is very latency sensitive but at the
EI level appears mostly idle). Indeed, the per-context series does
extend the modeset boosting to include a frequency range tweak which
seems applicable to solving this jittery UX behaviour.
Reported-by: Lyude Paul <lyude@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109408
References: 0d55babc8392 ("drm/i915: Drop stray clearing of rps->last_adj")
References: 60548c554be2 ("drm/i915: Interactive RPS mode")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Quoting Lyude Paul:
> Before reverting 0d55babc8392754352f1058866dd4182ae587d11: [4.20]
>
> 35 measurements [of gnome-shell animations]
> Average: 33.65657142857143 FPS
> FPS observed: 20.8 - 46.87 FPS
> Percentage under 60 FPS: 100.0%
> Percentage under 55 FPS: 100.0%
> Percentage under 50 FPS: 100.0%
> Percentage under 45 FPS: 97.14285714285714%
> Percentage under 40 FPS: 97.14285714285714%
> Percentage under 35 FPS: 45.714285714285715%
> Percentage under 30 FPS: 11.428571428571429%
> Percentage under 25 FPS: 2.857142857142857%
>
> After reverting: [4.19 behaviour]
>
> 30 measurements
> Average: 49.833666666666666 FPS
> FPS observed: 33.85 - 60.0 FPS
> Percentage under 60 FPS: 86.66666666666667%
> Percentage under 55 FPS: 70.0%
> Percentage under 50 FPS: 53.333333333333336%
> Percentage under 45 FPS: 20.0%
> Percentage under 40 FPS: 6.666666666666667%
> Percentage under 35 FPS: 6.666666666666667%
> Percentage under 30 FPS: 0%
> Percentage under 25 FPS: 0%
>
> Patched:
> 42 measurements
> Average: 46.05428571428571 FPS
> FPS observed: 1.82 - 59.98 FPS
> Percentage under 60 FPS: 88.09523809523809%
> Percentage under 55 FPS: 61.904761904761905%
> Percentage under 50 FPS: 45.23809523809524%
> Percentage under 45 FPS: 35.714285714285715%
> Percentage under 40 FPS: 33.33333333333333%
> Percentage under 35 FPS: 19.047619047619047%
> Percentage under 30 FPS: 7.142857142857142%
> Percentage under 25 FPS: 4.761904761904762%
Tested-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-13-chris@chris-wilson.co.uk
|
|
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
HDCP transmitter is supposed to indicate the HDCP encryption status of
the link through enc_en signals in a window of time called "window of
opportunity" defined by HDCP HDMI spec.
But on KBL this timing of signalling has an issue. To fix the issue this
WA of resetting the signalling is required.
v2:
WA is moved into the toggle_signalling [Daniel]
v3:
Commit msg is rewritten with more information
v4:
Reviewed-by Daniel.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-17-git-send-email-ramalingam.c@intel.com
|
|
Implements the
Waitqueue is created to wait for CP_IRQ
Signaling the CP_IRQ arrival through atomic variable.
For applicable DP HDCP2.2 msgs read wait for CP_IRQ.
As per HDCP2.2 spec "HDCP Transmitters must process CP_IRQ interrupts
when they are received from HDCP Receivers"
Without CP_IRQ processing, DP HDCP2.2 H_Prime msg was getting corrupted
while reading it based on corresponding status bit. This creates the
random failures in reading the DP HDCP2.2 msgs.
v2:
CP_IRQ arrival is tracked based on the atomic val inc [daniel]
Recording the reviewed-by Daniel from IRC.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-16-git-send-email-ramalingam.c@intel.com
|
|
Implements the HDMI adaptation specific HDCP2.2 operations.
Basically these are DDC read and write for authenticating through
HDCP2.2 messages.
v2: Rebased.
v3:
No more special handling of Gmbus burst read for AKE_SEND_CERT.
Style fixed with few naming. [Uma]
%s/PARING/PAIRING
v4:
msg_sz is initialized at definition.
Lookup table is defined for HDMI HDCP2.2 msgs [Daniel].
v5: Rebased.
v6:
Make a function as inline [Uma]
%s/uintxx_t/uxx
v7:
Errors due to sinks are reported as DEBUG logs.
Adjust to the new mei interface.
v8:
ARRAY_SIZE for the # of array members [Jon & Daniel].
hdcp adaptation is added as a const in the hdcp_shim [Daniel]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-15-git-send-email-ramalingam.c@intel.com
|
|
Implements the DP adaptation specific HDCP2.2 functions.
These functions perform the DPCD read and write for communicating the
HDCP2.2 auth message back and forth.
v2:
wait for cp_irq is merged with this patch. Rebased.
v3:
wait_queue is used for wait for cp_irq [Chris Wilson]
v4:
Style fixed.
%s/PARING/PAIRING
Few style fixes [Uma]
v5:
Lookup table for DP HDCP2.2 msg details [Daniel].
Extra lines are removed.
v6: Rebased.
v7:
Fixed some regression introduced at v5. [Ankit]
Macro HDCP_2_2_RX_CAPS_VERSION_VAL is reused [Uma]
Converted a function to inline [Uma]
%s/uintxx_t/uxx
v8:
Error due to the sinks are reported as DEBUG logs.
Adjust to the new mei interface.
v9:
ARRAY_SIZE for no of array members [Jon & Daniel]
return of the wait_for_cp_irq is made as void [Daniel]
Wait for HDCP2.2 msg is done based on polling the reg bit than
CP_IRQ based. [Daniel]
hdcp adaptation is added as a const in the hdcp_shim [Daniel]
v10:
config_stream_type is redefined [Daniel]
DP Errata specific defines are moved into intel_dp.c.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ankit K Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-14-git-send-email-ramalingam.c@intel.com
|
|
Since DP ERRATA message is not defined at spec, those structure
definition is removed from drm_hdcp.h
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-13-git-send-email-ramalingam.c@intel.com
|
|
When repeater notifies a downstream topology change, this patch
reauthenticate the repeater alone without disabling the hdcp
encryption. If that fails then complete reauthentication is executed.
v2:
Rebased.
v3:
Typo in commit msg is fixed [Uma]
v4:
Rebased as part of patch reordering.
Minor style fixes.
v5:
Rebased.
v6:
Rebased.
v7:
Errors due to sinks are reported as DEBUG logs.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-12-git-send-email-ramalingam.c@intel.com
|
|
Implements the link integrity check once in 500mSec.
Once encryption is enabled, an ongoing Link Integrity Check is
performed by the HDCP Receiver to check that cipher synchronization
is maintained between the HDCP Transmitter and the HDCP Receiver.
On the detection of synchronization lost, the HDCP Receiver must assert
the corresponding bits of the RxStatus register. The Transmitter polls
the RxStatus register and it may initiate re-authentication.
v2:
Rebased.
v3:
enum check_link_response is used check the link status [Uma]
v4:
Rebased as part of patch reordering.
v5:
Required members of intel_hdcp is defined [Sean Paul]
v6:
hdcp2_check_link is cancelled at required places.
v7:
Rebased for the component i/f changes.
Errors due to the sinks are reported as DEBUG logs.
v8:
hdcp_check_work is used for both hdcp1 and hdcp2 check_link [Daniel]
hdcp2.2 encryption status check is put under WARN_ON [Daniel]
drm_hdcp.h changes are moved into separate patch [Daniel]
v9:
enum check_link_status is defined at intel_drv.h [Daniel]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-11-git-send-email-ramalingam.c@intel.com
|
|
Time period for HDCP2.2 link check.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-10-git-send-email-ramalingam.c@intel.com
|
|
Implements the HDCP2.2 repeaters authentication steps such as verifying
the downstream topology and sending stream management information.
v2: Rebased.
v3:
-EINVAL is returned for topology error and rollover scenario.
Endianness conversion func from drm_hdcp.h is used [Uma]
v4:
Rebased as part of patches reordering.
Defined the mei service functions [Daniel]
v5:
Redefined the mei service functions as per comp redesign.
v6:
%s/uintxx_t/uxx
Check for comp_master is removed.
v7:
Adjust to the new mei interface.
style issue fixed.
v8:
drm_hdcp.h change is moved into separate patch [Daniel]
v9:
%s/__swab16/cpu_to_be16. [Tomas]
Reviewed-by Uma.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-9-git-send-email-ramalingam.c@intel.com
|
|
Implements HDCP2.2 authentication for hdcp2.2 receivers, with
following steps:
Authentication and Key exchange (AKE).
Locality Check (LC).
Session Key Exchange(SKE).
DP Errata for stream type configuration for receivers.
At AKE, the HDCP Receiver’s public key certificate is verified by the
HDCP Transmitter. A Master Key k m is exchanged.
At LC, the HDCP Transmitter enforces locality on the content by
requiring that the Round Trip Time (RTT) between a pair of messages
is not more than 20 ms.
At SKE, The HDCP Transmitter exchanges Session Key ks with
the HDCP Receiver.
In DP HDCP2.2 encryption and decryption logics use the stream type as
one of the parameter. So Before enabling the Encryption DP HDCP2.2
receiver needs to be communicated with stream type. This is added to
spec as ERRATA.
This generic implementation is complete only with the hdcp2 specific
functions defined at hdcp_shim.
v2: Rebased.
v3:
%s/PARING/PAIRING
Coding style fixing [Uma]
v4:
Rebased as part of patch reordering.
Defined the functions for mei services. [Daniel]
v5:
Redefined the mei service functions as per comp redesign.
Required intel_hdcp members are defined [Sean Paul]
v6:
Typo of cipher is Fixed [Uma]
%s/uintxx_t/uxx
Check for comp_master is removed.
v7:
Adjust to the new interface.
Avoid using bool structure members. [Tomas]
v8: Rebased.
v9:
bool is used in struct intel_hdcp [Daniel]
config_stream_type is redesigned [Daniel]
Reviewed-by Uma.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-8-git-send-email-ramalingam.c@intel.com
|
|
Considering that HDCP2.2 is more secure than HDCP1.4, When a setup
supports HDCP2.2 and HDCP1.4, HDCP2.2 will be enabled.
When HDCP2.2 enabling fails and HDCP1.4 is supported, HDCP1.4 is
enabled.
This change implements a sequence of enabling and disabling of
HDCP2.2 authentication and HDCP2.2 port encryption.
v2:
Included few optimization suggestions [Chris Wilson]
Commit message is updated as per the rebased version.
intel_wait_for_register is used instead of wait_for. [Chris Wilson]
v3:
Extra comment added and Style issue fixed [Uma]
v4:
Rebased as part of patch reordering.
HDCP2 encryption status is tracked.
HW state check is moved into WARN_ON [Daniel]
v5:
Redefined the mei service functions as per comp redesign.
Merged patches related to hdcp2.2 enabling and disabling [Sean Paul].
Required shim functionality is defined [Sean Paul]
v6:
Return values are handles [Uma]
Realigned the code.
Check for comp_master is removed.
v7:
HDCP2.2 is attempted only if mei interface is up.
Adjust to the new interface
Avoid bool usage in struct [Tomas]
v8:
mei_binded status check is removed.
%s/hdcp2_in_use/hdcp2_encrypted
v9:
bool is used in struct intel_hdcp. [Daniel]
v10:
panel is replaced with sink [Uma]
Mei interface decided the hdcp2_capability.
WARN_ON if hdcp_enable is called when hdcp state is ENABLED.
Reviewed-by Uma.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-7-git-send-email-ramalingam.c@intel.com
|
|
The master clock is actually named masterck earlier in the driver. Having
"mck" in the parent list means that it can never be selected.
Fixes: 1eabdc2f9dd8 ("clk: at91: add at91sam9x5 PMCs driver")
Fixes: a2038077de9a ("clk: at91: add sama5d2 PMC driver")
Fixes: 084b696bb509 ("clk: at91: add sama5d4 pmc driver")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
"hdcp_encrypted" flag is defined to denote the HDCP1.4 encryption status.
This SW tracking is used to determine the need for real hdcp1.4 disable
and hdcp_check_link upon CP_IRQ.
On CP_IRQ we filter the CP_IRQ related to the states like Link failure
and reauthentication req etc and handle them in hdcp_check_link.
CP_IRQ corresponding to the authentication msg availability are ignored.
WARN_ON is added for the abrupt stop of HDCP encryption of a port.
v2:
bool is used in struct for the cleaner coding. [Daniel]
check_link work_fn is scheduled for cp_irq handling [Daniel]
v3:
rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-6-git-send-email-ramalingam.c@intel.com
|
|
Defining the mei-i915 interface functions and initialization of
the interface.
v2:
Adjust to the new interface changes. [Tomas]
Added further debug logs for the failures at MEI i/f.
port in hdcp_port data is equipped to handle -ve values.
v3:
mei comp is matched for global i915 comp master. [Daniel]
In hdcp_shim hdcp_protocol() is replaced with const variable. [Daniel]
mei wrappers are adjusted as per the i/f change [Daniel]
v4:
port initialization is done only at hdcp2_init only [Danvet]
v5:
I915 registers a subcomponent to be matched with mei_hdcp [Daniel]
v6:
HDCP_disable for all connectors incase of comp_unbind.
Tear down HDCP comp interface at i915_unload [Daniel]
v7:
Component init and fini are moved out of connector ops [Daniel]
hdcp_disable is not called from unbind. [Daniel]
v8:
subcomponent name is dropped as it is already merged.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> [v11]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-5-git-send-email-ramalingam.c@intel.com
|
|
Add the HDCP2.2 initialization to the existing HDCP1.4 stack.
v2:
mei interface handle is protected with mutex. [Chris Wilson]
v3:
Notifiers are used for the mei interface state.
v4:
Poll for mei client device state
Error msg for out of mem [Uma]
Inline req for init function removed [Uma]
v5:
Rebase as Part of reordering.
Component is used for the I915 and MEI_HDCP interface [Daniel]
v6:
HDCP2.2 uses the I915 component master to communicate with mei_hdcp
- [Daniel]
Required HDCP2.2 variables defined [Sean Paul]
v7:
intel_hdcp2.2_init returns void [Uma]
Realigning the codes.
v8:
Avoid using bool structure members.
MEI interface related changes are moved into separate patch.
Commit msg is updated accordingly.
intel_hdcp_exit is defined and used from i915_unload
v9:
Movement of the hdcp_check_link is moved to new patch [Daniel]
intel_hdcp2_exit is removed as mei_comp will be unbind in i915_unload.
v10:
bool is used in struct to make coding simpler. [Daniel]
hdmi hdcp init is placed correctly after encoder attachment.
v11:
hdcp2_capability check is moved into hdcp.c [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-4-git-send-email-ramalingam.c@intel.com
|
|
All HDCP1.4 routines are gathered together, followed by the generic
functions those can be extended for HDCP2.2 too.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-2-git-send-email-ramalingam.c@intel.com
|
|
nck() looks at the last id in an array and unfortunately,
at91sam9x35_periphck has a sentinel, hence the id is 0 and the calculated
number of peripheral clocks is 1 instead of a maximum of 31.
Fixes: 1eabdc2f9dd8 ("clk: at91: add at91sam9x5 PMCs driver")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
When a DSA port is added to a bridge and brought up, the resulting STP
state programmed into the hardware depends on the order that these
operations are performed. However, the Linux bridge code believes that
the port is in disabled mode.
If the DSA port is first added to a bridge and then brought up, it will
be in blocking mode. If it is brought up and then added to the bridge,
it will be in disabled mode.
This difference is caused by DSA always setting the STP mode in
dsa_port_enable() whether or not this port is part of a bridge. Since
bridge always sets the STP state when the port is added, brought up or
taken down, it is unnecessary for us to manipulate the STP state.
Apparently, this code was copied from Rocker, and the very next day a
similar fix for Rocker was merged but was not propagated to DSA. See
e47172ab7e41 ("rocker: put port in FORWADING state after leaving bridge")
Fixes: b73adef67765 ("net: dsa: integrate with SWITCHDEV for HW bridging")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are a few last-minute fixes for 5.0.
The most significant one is the OF-node refcount fix for ASoC
simple-card, which could be triggered on many boards. Another fix for
ASoC core is for the error handling in topology, while others are
device-specific fixes for Samsung and HD-audio"
* tag 'sound-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: simple-card: fixup refcount_t underflow
ASoC: topology: free created components in tplg load error
ALSA: hda/realtek: Disable PC beep in passthrough on alc285
ALSA: hda/realtek - Headset microphone and internal speaker support for System76 oryp5
ASoC: samsung: i2s: Fix prescaler setting for the secondary DAI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some final pin control fixes (I hope) to round off the v5.0 pin
control development cycle.
Only driver fixes, one for stable:
- Meson8B fixup for the sdc pins
- Fix SDC tile position for Qualcomm QCS404"
* tag 'pinctrl-v5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pins
pinctrl: qcom: qcs404: Correct SDC tile
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Two GPIO fixes for the v5.0 series:
- Per-instance irqchip on the MT7621
- Avoid direction setting using pin control on MMP2"
* tag 'gpio-v5.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2
gpio: MT7621: use a per instance irq_chip structure
|
|
Pull MTD fixes from Boris Brezillon:
- Don't add a digit to MTD-backed nvmem device names
- Make sure powernv flash names are unique
* tag 'mtd/fixes-for-5.0-rc8' of git://git.infradead.org/linux-mtd:
mtd: powernv_flash: Fix device registration error
mtd: Use mtd->name when registering nvmem device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull keys fixes from James Morris:
- Handle quotas better, allowing full quota to be reached.
- Fix the creation of shortcuts in the assoc_array internal
representation when the index key needs to be an exact multiple of
the machine word size.
- Fix a dependency loop between the request_key contruction record and
the request_key authentication key. The construction record isn't
really necessary and can be dispensed with.
- Set the timestamp on a new key rather than leaving it as 0. This
would ordinarily be fine - provided the system clock is never set to
a time before 1970
* 'fixes-v5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
keys: Timestamp new keys
keys: Fix dependency loop between construction record and auth key
assoc_array: Fix shortcut creation
KEYS: allow reaching the keys quotas exactly
|
|
The idea of taking the reset lock around writing the fence register was
to serialise the mmio write we also perform during the reset where those
registers get clobbered. However, the lock is overkill as write tearing
between reset and fence_update() is harmless; the final value of the
fence register is the same. A race between revoke_fences() and
fence_update() is also harmless at this point as on the fault path where
this is necessary, we acquire the reset lock to coordinate ourselves in
the upper layer.
The danger of acquiring the reset lock again in fence_update() is that
we may recurse from the shrinker along the i915_gem_fault() path.
<4> [125.739646] ============================================
<4> [125.739652] WARNING: possible recursive locking detected
<4> [125.739659] 5.0.0-rc6-ga6e4cbf00557-drmtip_223+ #1 Tainted: G U
<4> [125.739666] --------------------------------------------
<4> [125.739672] gem_mmap_gtt/1017 is trying to acquire lock:
<4> [125.739679] 00000000a730190a (&dev_priv->gpu_error.reset_backoff_srcu){+.+.}, at: i915_reset_trylock+0x0/0x310 [i915]
<4> [125.739848]
but task is already holding lock:
<4> [125.739854] 00000000a730190a (&dev_priv->gpu_error.reset_backoff_srcu){+.+.}, at: i915_reset_trylock+0x192/0x310 [i915]
<4> [125.739918]
other info that might help us debug this:
<4> [125.739925] Possible unsafe locking scenario:
<4> [125.739930] CPU0
<4> [125.739934] ----
<4> [125.739937] lock(&dev_priv->gpu_error.reset_backoff_srcu);
<4> [125.739944] lock(&dev_priv->gpu_error.reset_backoff_srcu);
<4> [125.739950]
*** DEADLOCK ***
<4> [125.739958] May be due to missing lock nesting notation
<4> [125.739966] 5 locks held by gem_mmap_gtt/1017:
<4> [125.739972] #0: 00000000471f682c (&mm->mmap_sem){++++}, at: __do_page_fault+0x133/0x500
<4> [125.739987] #1: 0000000026542685 (&dev->struct_mutex){+.+.}, at: i915_gem_fault+0x1f6/0x860 [i915]
<4> [125.740061] #2: 00000000a730190a (&dev_priv->gpu_error.reset_backoff_srcu){+.+.}, at: i915_reset_trylock+0x192/0x310 [i915]
<4> [125.740126] #3: 00000000c828eb4f (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part.25+0x0/0x30
<4> [125.740140] #4: 000000002d360d65 (shrinker_rwsem){++++}, at: shrink_slab+0x1cb/0x2c0
<4> [125.740151]
stack backtrace:
<4> [125.740159] CPU: 1 PID: 1017 Comm: gem_mmap_gtt Tainted: G U 5.0.0-rc6-ga6e4cbf00557-drmtip_223+ #1
<4> [125.740170] Hardware name: Dell Inc. OptiPlex 745 /0GW726, BIOS 2.3.1 05/21/2007
<4> [125.740180] Call Trace:
<4> [125.740189] dump_stack+0x67/0x9b
<4> [125.740199] __lock_acquire+0xc75/0x1b00
<4> [125.740209] ? arch_tlb_finish_mmu+0x2a/0xa0
<4> [125.740216] ? tlb_finish_mmu+0x1a/0x30
<4> [125.740222] ? zap_page_range_single+0xe2/0x130
<4> [125.740230] ? lock_acquire+0xa6/0x1c0
<4> [125.740237] lock_acquire+0xa6/0x1c0
<4> [125.740296] ? i915_clear_error_registers+0x280/0x280 [i915]
<4> [125.740357] i915_reset_trylock+0x44/0x310 [i915]
<4> [125.740417] ? i915_clear_error_registers+0x280/0x280 [i915]
<4> [125.740426] ? lockdep_hardirqs_on+0xe0/0x1b0
<4> [125.740434] ? _raw_spin_unlock_irqrestore+0x39/0x60
<4> [125.740499] fence_update+0x218/0x470 [i915]
<4> [125.740571] i915_vma_unbind+0xa6/0x550 [i915]
<4> [125.740640] i915_gem_object_unbind+0xfa/0x190 [i915]
<4> [125.740711] i915_gem_shrink+0x2dc/0x590 [i915]
<4> [125.740722] ? ___preempt_schedule+0x16/0x18
<4> [125.740792] ? i915_gem_shrinker_scan+0xc9/0x130 [i915]
<4> [125.740861] i915_gem_shrinker_scan+0xc9/0x130 [i915]
<4> [125.740870] do_shrink_slab+0x143/0x3f0
<4> [125.740878] shrink_slab+0x228/0x2c0
<4> [125.740886] shrink_node+0x167/0x450
<4> [125.740894] do_try_to_free_pages+0xc4/0x340
<4> [125.740902] try_to_free_pages+0xdc/0x2e0
<4> [125.740911] __alloc_pages_nodemask+0x662/0x1110
<4> [125.740921] ? reacquire_held_locks+0xb5/0x1b0
<4> [125.740928] ? reacquire_held_locks+0xb5/0x1b0
<4> [125.740986] ? i915_reset_trylock+0x192/0x310 [i915]
<4> [125.741045] ? i915_memcpy_init_early+0x30/0x30 [i915]
<4> [125.741054] pte_alloc_one+0x12/0x70
<4> [125.741060] __pte_alloc+0x11/0xf0
<4> [125.741067] apply_to_page_range+0x37e/0x440
<4> [125.741127] remap_io_mapping+0x6c/0x100 [i915]
<4> [125.741196] i915_gem_fault+0x5a9/0x860 [i915]
<4> [125.741204] ? ptlock_alloc+0x15/0x30
<4> [125.741212] __do_fault+0x2c/0xb0
<4> [125.741218] __handle_mm_fault+0x8ee/0xfa0
<4> [125.741227] handle_mm_fault+0x196/0x3a0
<4> [125.741235] __do_page_fault+0x246/0x500
<4> [125.741243] ? page_fault+0x8/0x30
<4> [125.741250] page_fault+0x1e/0x30
<4> [125.741256] RIP: 0033:0x55d0cc456e12
<4> [125.741264] Code: b0 df ff ff 89 c2 8b 85 70 df ff ff 01 c2 8b 85 70 df ff ff 48 98 48 8d 0c 85 00 00 00 00 48 8b 85 e0 df ff ff 48 01 c8 f7 d2 <89> 10 83 85 70 df ff ff 01 81 bd 70 df ff ff ff 03 00 00 7e be 48
<4> [125.741280] RSP: 002b:00007ffc1bab7ab0 EFLAGS: 00010206
<4> [125.741287] RAX: 00007fc787cb6000 RBX: 0000000000000000 RCX: 0000000000000000
<4> [125.741295] RDX: 00000000ffffffff RSI: 0000000000005401 RDI: 0000000000000002
<4> [125.741303] RBP: 00007ffc1bab9b70 R08: 00007ffc1bab7920 R09: 000000000000001b
<4> [125.741310] R10: 7165722074736554 R11: 0000000000000246 R12: 000055d0cc454a80
<4> [125.741318] R13: 00007ffc1bab9f60 R14: 0000000000000000 R15: 0000000000000000
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109665
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-4-chris@chris-wilson.co.uk
|
|
At a few points in our uABI, we check to see if the driver is wedged and
report -EIO back to the user in that case. However, as we perform the
check and reset asynchronously (where once before they were both
serialised by the struct_mutex), we may instead see the temporary wedging
used to cancel inflight rendering to avoid a deadlock during reset
(caused by either us timing out in our reset handler,
i915_wedge_on_timeout or with malice aforethought in intel_reset_prepare
for a stuck modeset). If we suspect this is the case, that is we see a
wedged driver *and* reset in progress, then wait until the reset is
resolved before reporting upon the wedged status.
v2: might_sleep() (Mika)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109580
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220145637.23503-1-chris@chris-wilson.co.uk
|
|
Commit 482997699ef0 ("ARM: tegra: Fix unit_address_vs_reg DTC warnings
for /memory") inadventently broke device tree ABI by adding a unit-
address to the "/memory" node because the device tree compiler flagged
the missing unit-address as a warning.
Tegra124 Chromebooks (a.k.a. Nyan) use a bootloader that relies on the
full name of the memory node in device tree being exactly "/memory". It
can be argued whether this was a good decision or not, and some other
bootloaders (such as U-Boot) do accept a unit-address in the name of the
node, but the device tree is an ABI and we can't break existing setups
just because the device tree compiler considers it bad practice to omit
the unit-address nowadays.
This partially reverts the offending commit and restores device tree ABI
compatibility.
Fixes: 482997699ef0 ("ARM: tegra: Fix unit_address_vs_reg DTC warnings for /memory")
Reported-by: Tristan Bastian <tristan-c.bastian@gmx.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Tristan Bastian <tristan-c.bastian@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Updates to the GIC architecture allow ID_AA64PFR0_EL1.GIC to have
values other than 0 or 1. At the moment, Linux is quite strict in the
way it handles this field at early boot stage (cpufeature is fine) and
will refuse to use the system register CPU interface if it doesn't
find the value 1.
Fixes: 021f653791ad17e03f98aaa7fb933816ae16f161 ("irqchip: gic-v3: Initial support for GICv3")
Reported-by: Chase Conklin <Chase.Conklin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
If we skipped all the connectors that were not part of a tile, we would
leave conn_seq=0 and conn_configured=0, convincing ourselves that we
had stagnated in our configuration attempts. Avoid this situation by
starting conn_seq=ALL_CONNECTORS, and repeating until we find no more
connectors to configure.
Fixes: 754a76591b12 ("drm/i915/fbdev: Stop repeating tile configuration on stagnation")
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190215123019.32283-1-chris@chris-wilson.co.uk
Cc: <stable@vger.kernel.org> # v3.19+
(cherry picked from commit d9b308b1f8a1acc0c3279f443d4fe0f9f663252e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next-queued
Prep patches + headers for the mei-hdcp/i915 component interfaces
Also contains the prep work in the component helpers plus adjustements
for the snd-hda/i915 component interface.
Plus one small static inline in the drm_hdcp.h header that both i915
and mei_hdcp will need.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219071619.GA11016@phenom.ffwll.local
|
|
Doing a backmerge to be able to merge topic/mei-hdcp-2019-02-19 PR.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
On the display side, cleanups and fixes to enabled modifiers
(QCOM_COMPRESSED). And otherwise mostly misc fixes all around.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGuZ5uBKpf=fHvKpTiD10nychuEY8rnE+HeRz0QMvtY5_A@mail.gmail.com
|
|
Pull networking fixes from David Miller:
1) Fix suspend and resume in mt76x0u USB driver, from Stanislaw
Gruszka.
2) Missing memory barriers in xsk, from Magnus Karlsson.
3) rhashtable fixes in mac80211 from Herbert Xu.
4) 32-bit MIPS eBPF JIT fixes from Paul Burton.
5) Fix for_each_netdev_feature() on big endian, from Hauke Mehrtens.
6) GSO validation fixes from Willem de Bruijn.
7) Endianness fix for dwmac4 timestamp handling, from Alexandre Torgue.
8) More strict checks in tcp_v4_err(), from Eric Dumazet.
9) af_alg_release should NULL out the sk after the sock_put(), from Mao
Wenan.
10) Missing unlock in mac80211 mesh error path, from Wei Yongjun.
11) Missing device put in hns driver, from Salil Mehta.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
sky2: Increase D3 delay again
vhost: correctly check the return value of translate_desc() in log_used()
net: netcp: Fix ethss driver probe issue
net: hns: Fixes the missing put_device in positive leg for roce reset
net: stmmac: Fix a race in EEE enable callback
qed: Fix iWARP syn packet mac address validation.
qed: Fix iWARP buffer size provided for syn packet processing.
r8152: Add support for MAC address pass through on RTL8153-BD
mac80211: mesh: fix missing unlock on error in table_path_del()
net/mlx4_en: fix spelling mistake: "quiting" -> "quitting"
net: crypto set sk to NULL when af_alg_release.
net: Do not allocate page fragments that are not skb aligned
mm: Use fixed constant in page_frag_alloc instead of size + 1
tcp: tcp_v4_err() should be more careful
tcp: clear icsk_backoff in tcp_write_queue_purge()
net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe()
qmi_wwan: apply SET_DTR quirk to Sierra WP7607
net: stmmac: handle endianness in dwmac4_get_timestamp
doc: Mention MSG_ZEROCOPY implementation for UDP
mlxsw: __mlxsw_sp_port_headroom_set(): Fix a use of local variable
...
|
|
Various fixes/cleanups, along with initial support for SVM features
utilising HMM address-space mirroring and device memory migration.
There's a lot more work to do in these areas, both in terms of
features and efficiency, but these can slowly trickle in later down
the track.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5bsB4rRY1Gqa_Bp_KAd-v_q1rGZ4nYmOAQhceL0Nr-Xg@mail.gmail.com
|
|
Removes the need for temporary VMM mappings.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Removes the need for temporary VMM mappings.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This add an ioctl to migrate a range of process address space to the
device memory. On platform without cache coherent bus (x86, ARM, ...)
this means that CPU can not access that range directly, instead CPU
will fault which will migrate the memory back to system memory.
This is behind a staging flag so that we can evolve the API.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
|
|
Device memory can be use in SVM, in which case we do not have any of
the existing buffer object. This commit add infrastructure to allow
use of device memory without nouveau_bo. Again this is a temporary
solution until a rework of GPU memory management.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
|
|
This uses HMM to mirror a process' CPU page tables into a channel's page
tables, and keep them synchronised so that both the CPU and GPU are able
to access the same memory at the same virtual address.
While this code also supports Volta/Turing, it's only enabled for Pascal
GPUs currently due to channel recovery being unreliable right now on the
later GPUs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
For a channel to make use of SVM features, it requires a different GPU MMU
configuration than we would normally use, which is not desirable to switch
to unless a client is actively going to use SVM.
In order to supporting SVM without more extensive changes to the userspace
interfaces, the SVM_INIT ioctl needs to replace the previous configuration
safely.
The only way we can currently do this safely, accounting for some unlikely
failure conditions, is to allocate the new VMM without destroying the last
one, and prioritising the SVM-enabled configuration in the code that cares.
This will get cleaned up again further down the track.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This nvclass exposes the replayable fault buffer, which will be used
by SVM to manage GPU page faults.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This nvclass exposes the replayable fault buffer, which will be used
by SVM to manage GPU page faults.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Some GPU units are capable of supporting "replayable" page faults, where
the execution unit will wait for SW to fixup GPU page tables rather than
triggering a channel-fatal fault.
This feature isn't useful (it's harmful, even) unless something like HMM
is being used to manage events appearing in the replayable fault buffer,
so, it's disabled by default.
This commit allows a client to request it be enabled.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Host methods exist to do at least some of what we need, but we are not
currently pushing replay/cancels through a channel like UVM does as it's
not clear whether it's necessary in our case (UVM also updates PTEs with
the GPU).
UVM also pushes a software method for fault cancels on Pascal, seemingly
because the host methods don't appear to be sufficient. If/when we want
to push the replay/cancel on the GPU, we can re-purpose the cancellation
code here to implement that swmthd.
Keep it simple for now, until we figure out exactly what we need here.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This provides a somewhat more direct method of manipulating the GPU page
tables, which will be required to support SVM.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This will be used to support a privileged client providing PTEs directly,
without a memory object to use as a reference.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
