summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-26drm/i915: Remove i915_request.global_seqnoChris Wilson
Having weaned the interrupt handling off using a single global execution queue, we no longer need to emit a global_seqno. Note that we still have a few assumptions about execution order along engine timelines, but this removes the most obvious artefact! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190226094922.31617-3-chris@chris-wilson.co.uk
2019-02-26drm/i915: Remove access to global seqno in the HWSPChris Wilson
Stop accessing the HWSP to read the global seqno, and stop tracking the mirror in the engine's execution timeline -- it is unused. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190226094922.31617-2-chris@chris-wilson.co.uk
2019-02-26drm/i915: Replace global_seqno with a hangcheck heartbeat seqnoChris Wilson
To determine whether an engine has 'stuck', we simply check whether or not is still on the same seqno for several seconds. To keep this simple mechanism intact over the loss of a global seqno, we can simply add a new global heartbeat seqno instead. As we cannot know the sequence in which requests will then be completed, we use a primitive random number generator instead (with a cycle long enough to not matter over an interval of a few thousand requests between hangcheck samples). The alternative to using a dedicated seqno on every request is to issue a heartbeat request and query its progress through the system. Sadly this requires us to reduce struct_mutex so that we can issue requests without requiring that bkl. v2: And without the extra CS_STALL for the hangcheck seqno -- we don't need strict serialisation with what comes later, we just need to be sure we don't write the hangcheck seqno before our batch is flushed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190226094922.31617-1-chris@chris-wilson.co.uk
2019-02-26mmc: tmio: fix access width of Block Count RegisterTakeshi Saito
In R-Car Gen2 or later, the maximum number of transfer blocks are changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register should use iowrite32(). If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this value will not be cleared. So, SD/MMC card initialization fails. So, check for the bigger register and use apropriate write. Also, mark the register as extended on Gen2. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: use max_blk_count in if(), add Gen2, update commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@kernel.org Reviewed-by: Simon Horman <horms+renesas@verge.net.au> [Ulf: Fixed build error] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25scsi: hptiop: fix calls to dma_set_mask()Hannes Reinecke
The change to use dma_set_mask() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. Fixes: 453cd3700ca3 ("scsi: hptiop: use dma_set_mask") Cc: <stable@vger.kernel.org> Suggested-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: hisi_sas: fix calls to dma_set_mask_and_coherent()Hannes Reinecke
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. [mkp: fixed commit message] Fixes: e4db40e7a1a2 ("scsi: hisi_sas: use dma_set_mask_and_coherent") Cc: <stable@vger.kernel.org> Suggested-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: csiostor: fix calls to dma_set_mask_and_coherent()Hannes Reinecke
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. Fixes: c22b332d811b ("scsi: csiostor: switch to generic DMA API") Cc: <stable@vger.kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: bfa: fix calls to dma_set_mask_and_coherent()Hannes Reinecke
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. [mkp: fixed commit message] Fixes: a69b080025ea ("scsi: bfa: use dma_set_mask_and_coherent") Cc: <stable@vger.kernel.org> Suggested-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: aic94xx: fix calls to dma_set_mask_and_coherent()Hannes Reinecke
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. [mkp: fixed subject] Fixes: 3a21986f1a59 ("scsi: aic94xx: fully convert to the generic DMA API") Cc: <stable@vger.kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: 3w-sas: fix calls to dma_set_mask_and_coherent()Hannes Reinecke
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. Fixes: b1fa122930c4 ("scsi: 3w-sas: fully convert to the generic DMA API") Cc: <stable@vger.kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: 3w-9xxx: fix calls to dma_set_mask_and_coherent()Hannes Reinecke
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. Fixes: b000bced5739 ("scsi: 3w-9xxx: fully convert to the generic DMA API") Cc: <stable@vger.kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: lpfc: fix calls to dma_set_mask_and_coherent()Hannes Reinecke
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. This resulted in NVMe/FC connections failing due to corrupted data buffers, and various other SCSI/FCP I/O errors. Fixes: f30e1bfd6154 ("scsi: lpfc: use dma_set_mask_and_coherent") Cc: <stable@vger.kernel.org> Suggested-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25net: avoid use IPCB in cipso_v4_errorNazarov Sergey
Extract IP options in cipso_v4_error and use __icmp_send. Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25net: Add __icmp_send helper.Nazarov Sergey
Add __icmp_send function having ip_options struct parameter Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru> Reviewed-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25tun: remove unnecessary memory barrierTimur Celik
Replace set_current_state with __set_current_state since no memory barrier is needed at this point. Signed-off-by: Timur Celik <mail@timurcelik.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25MIPS: BCM63XX: provide DMA masks for ethernet devicesJonas Gorski
The switch to the generic dma ops made dma masks mandatory, breaking devices having them not set. In case of bcm63xx, it broke ethernet with the following warning when trying to up the device: [ 2.633123] ------------[ cut here ]------------ [ 2.637949] WARNING: CPU: 0 PID: 325 at ./include/linux/dma-mapping.h:516 bcm_enetsw_open+0x160/0xbbc [ 2.647423] Modules linked in: gpio_button_hotplug [ 2.652361] CPU: 0 PID: 325 Comm: ip Not tainted 4.19.16 #0 [ 2.658080] Stack : 80520000 804cd3ec 00000000 00000000 804ccc00 87085bdc 87d3f9d4 804f9a17 [ 2.666707] 8049cf18 00000145 80a942a0 00000204 80ac0000 10008400 87085b90 eb3d5ab7 [ 2.675325] 00000000 00000000 80ac0000 000022b0 00000000 00000000 00000007 00000000 [ 2.683954] 0000007a 80500000 0013b381 00000000 80000000 00000000 804a1664 80289878 [ 2.692572] 00000009 00000204 80ac0000 00000200 00000002 00000000 00000000 80a90000 [ 2.701191] ... [ 2.703701] Call Trace: [ 2.706244] [<8001f3c8>] show_stack+0x58/0x100 [ 2.710840] [<800336e4>] __warn+0xe4/0x118 [ 2.715049] [<800337d4>] warn_slowpath_null+0x48/0x64 [ 2.720237] [<80289878>] bcm_enetsw_open+0x160/0xbbc [ 2.725347] [<802d1d4c>] __dev_open+0xf8/0x16c [ 2.729913] [<802d20cc>] __dev_change_flags+0x100/0x1c4 [ 2.735290] [<802d21b8>] dev_change_flags+0x28/0x70 [ 2.740326] [<803539e0>] devinet_ioctl+0x310/0x7b0 [ 2.745250] [<80355fd8>] inet_ioctl+0x1f8/0x224 [ 2.749939] [<802af290>] sock_ioctl+0x30c/0x488 [ 2.754632] [<80112b34>] do_vfs_ioctl+0x740/0x7dc [ 2.759459] [<80112c20>] ksys_ioctl+0x50/0x94 [ 2.763955] [<800240b8>] syscall_common+0x34/0x58 [ 2.768782] ---[ end trace fb1a6b14d74e28b6 ]--- [ 2.773544] bcm63xx_enetsw bcm63xx_enetsw.0: cannot allocate rx ring 512 Fix this by adding appropriate DMA masks for the platform devices. Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: stable@vger.kernel.org # v4.19+
2019-02-25afs: Fix manually set volume location server listDavid Howells
When a cell with a volume location server list is added manually by echoing the details into /proc/net/afs/cells, a record is added but the flag saying it has been looked up isn't set. This causes the VL server rotation code to wait forever, with the top of /proc/pid/stack looking like: afs_select_vlserver+0x3a6/0x6f3 afs_vl_lookup_vldb+0x4b/0x92 afs_create_volume+0x25/0x1b9 ... with the thread stuck in afs_start_vl_iteration() waiting for AFS_CELL_FL_NO_LOOKUP_YET to be cleared. Fix this by clearing AFS_CELL_FL_NO_LOOKUP_YET when setting up a record if that record's details were supplied manually. Fixes: 0a5143f2f89c ("afs: Implement VL server rotation") Reported-by: Dave Botsch <dwb7@cornell.edu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-25tmpfs: fix uninitialized return value in shmem_linkDarrick J. Wong
When we made the shmem_reserve_inode call in shmem_link conditional, we forgot to update the declaration for ret so that it always has a known value. Dan Carpenter pointed out this deficiency in the original patch. Fixes: 1062af920c07 ("tmpfs: fix link accounting when a tmpfile is linked in") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Matej Kupljen <matej.kupljen@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-25x86/uaccess: Don't leak the AC flag into __put_user() value evaluationAndy Lutomirski
When calling __put_user(foo(), ptr), the __put_user() macro would call foo() in between __uaccess_begin() and __uaccess_end(). If that code were buggy, then those bugs would be run without SMAP protection. Fortunately, there seem to be few instances of the problem in the kernel. Nevertheless, __put_user() should be fixed to avoid doing this. Therefore, evaluate __put_user()'s argument before setting AC. This issue was noticed when an objtool hack by Peter Zijlstra complained about genregs_get() and I compared the assembly output to the C source. [ bp: Massage commit message and fixed up whitespace. ] Fixes: 11f1a4b9755f ("x86: reorganize SMAP handling in user space accesses") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190225125231.845656645@infradead.org
2019-02-25net: socket: set sock->sk to NULL after calling proto_ops::release()Eric Biggers
Commit 9060cb719e61 ("net: crypto set sk to NULL when af_alg_release.") fixed a use-after-free in sockfs_setattr() when an AF_ALG socket is closed concurrently with fchownat(). However, it ignored that many other proto_ops::release() methods don't set sock->sk to NULL and therefore allow the same use-after-free: - base_sock_release - bnep_sock_release - cmtp_sock_release - data_sock_release - dn_release - hci_sock_release - hidp_sock_release - iucv_sock_release - l2cap_sock_release - llcp_sock_release - llc_ui_release - rawsock_release - rfcomm_sock_release - sco_sock_release - svc_release - vcc_release - x25_release Rather than fixing all these and relying on every socket type to get this right forever, just make __sock_release() set sock->sk to NULL itself after calling proto_ops::release(). Reproducer that produces the KASAN splat when any of these socket types are configured into the kernel: #include <pthread.h> #include <stdlib.h> #include <sys/socket.h> #include <unistd.h> pthread_t t; volatile int fd; void *close_thread(void *arg) { for (;;) { usleep(rand() % 100); close(fd); } } int main() { pthread_create(&t, NULL, close_thread, NULL); for (;;) { fd = socket(rand() % 50, rand() % 11, 0); fchownat(fd, "", 1000, 1000, 0x1000); close(fd); } } Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.") Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25net: sched: act_tunnel_key: fix NULL pointer dereference during initVlad Buslov
Metadata pointer is only initialized for action TCA_TUNNEL_KEY_ACT_SET, but it is unconditionally dereferenced in tunnel_key_init() error handler. Verify that metadata pointer is not NULL before dereferencing it in tunnel_key_init error handling code. Fixes: ee28bb56ac5b ("net/sched: fix memory leak in act_tunnel_key_init()") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25net: dsa: fix a leaked reference by adding missing of_node_putWen Yang
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./net/dsa/port.c:294:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 284, but without a corresponding object release within this function. ./net/dsa/dsa2.c:627:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. ./net/dsa/dsa2.c:630:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. ./net/dsa/dsa2.c:636:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. ./net/dsa/dsa2.c:639:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25Revert "x86/fault: BUG() when uaccess helpers fault on kernel addresses"Linus Torvalds
This reverts commit 9da3f2b74054406f87dff7101a569217ffceb29b. It was well-intentioned, but wrong. Overriding the exception tables for instructions for random reasons is just wrong, and that is what the new code did. It caused problems for tracing, and it caused problems for strncpy_from_user(), because the new checks made perfectly valid use cases break, rather than catch things that did bad things. Unchecked user space accesses are a problem, but that's not a reason to add invalid checks that then people have to work around with silly flags (in this case, that 'kernel_uaccess_faults_ok' flag, which is just an odd way to say "this commit was wrong" and was sprinked into random places to hide the wrongness). The real fix to unchecked user space accesses is to get rid of the special "let's not check __get_user() and __put_user() at all" logic. Make __{get|put}_user() be just aliases to the regular {get|put}_user() functions, and make it impossible to access user space without having the proper checks in places. The raison d'être of the special double-underscore versions used to be that the range check was expensive, and if you did multiple user accesses, you'd do the range check up front (like the signal frame handling code, for example). But SMAP (on x86) and PAN (on ARM) have made that optimization pointless, because the _real_ expense is the "set CPU flag to allow user space access". Do let's not break the valid cases to catch invalid cases that shouldn't even exist. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Tobin C. Harding <tobin@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-25mmc: tmio_mmc_core: don't claim spurious interruptsSergei Shtylyov
I have encountered an interrupt storm during the eMMC chip probing (and the chip finally didn't get detected). It turned out that U-Boot left the DMAC interrupts enabled while the Linux driver didn't use those. The SDHI driver's interrupt handler somehow assumes that, even if an SDIO interrupt didn't happen, it should return IRQ_HANDLED. I think that if none of the enabled interrupts happened and got handled, we should return IRQ_NONE -- that way the kernel IRQ code recoginizes a spurious interrupt and masks it off pretty quickly... Fixes: 7729c7a232a9 ("mmc: tmio: Provide separate interrupt handlers") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: spi: Fix card detection during probeJonathan Neuschäfer
When using the mmc_spi driver with a card-detect pin, I noticed that the card was not detected immediately after probe, but only after it was unplugged and plugged back in (and the CD IRQ fired). The call tree looks something like this: mmc_spi_probe mmc_add_host mmc_start_host _mmc_detect_change mmc_schedule_delayed_work(&host->detect, 0) mmc_rescan host->bus_ops->detect(host) mmc_detect _mmc_detect_card_removed host->ops->get_cd(host) mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set) mmc_gpiod_request_cd ctx->cd_gpio = desc To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ is registered. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25drm/i915: Call MG_DP_MODE() macro with the right parameters orderJosé Roberto de Souza
The commit that this patch fixes changed the order of the parameters of MG_DP_MODE() but din't update the callers, breaking type-c on ICL. Fixes: 58106b7d816e ("drm/i915: Make MG PHY macros semantically consistent") Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Cc: Manasi navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190222202437.6575-1-jose.souza@intel.com
2019-02-25ARM: dts: gemini: Re-enable display controllerLinus Walleij
commit 137cd7100ec6fa36d610e106df00acb4d8af99df "ARM: dts: Enable Gemini flash access" contained a bug by disabling the display controller, while the whole idea with the patch was to enable flash access AND the display controller, simultaneously. Fix it up. Fixes: 137cd7100ec6 ("ARM: dts: Enable Gemini flash access") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-24tun: fix blocking readTimur Celik
This patch moves setting of the current state into the loop. Otherwise the task may end up in a busy wait loop if none of the break conditions are met. Signed-off-by: Timur Celik <mail@timurcelik.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24net: dsa: lantiq: Add GPHY firmware filesHauke Mehrtens
This adds the file names of the FW files which this driver handles into the module description. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24net/sched: act_skbedit: fix refcount leak when replace failsDavide Caratti
when act_skbedit was converted to use RCU in the data plane, we added an error path, but we forgot to drop the action refcount in case of failure during a 'replace' operation: # tc actions add action skbedit ptype otherhost pass index 100 # tc action show action skbedit total acts 1 action order 0: skbedit ptype otherhost pass index 100 ref 1 bind 0 # tc actions replace action skbedit ptype otherhost drop index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action show action skbedit total acts 1 action order 0: skbedit ptype otherhost pass index 100 ref 2 bind 0 Ensure we call tcf_idr_release(), in case 'params_new' allocation failed, also when the action is being replaced. Fixes: c749cdda9089 ("net/sched: act_skbedit: don't use spinlock in the data path") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24net/sched: act_ipt: fix refcount leak when replace failsDavide Caratti
After commit 4e8ddd7f1758 ("net: sched: don't release reference on action overwrite"), the error path of all actions was converted to drop refcount also when the action was being overwritten. But we forgot act_ipt_init(), in case allocation of 'tname' was not successful: # tc action add action xt -j LOG --log-prefix hello index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "hello" index 100 # tc action show action xt total acts 1 action order 0: tablename: mangle hook: NF_IP_POST_ROUTING target LOG level warning prefix "hello" index 100 ref 1 bind 0 # tc action replace action xt -j LOG --log-prefix world index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "world" index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action show action xt total acts 1 action order 0: tablename: mangle hook: NF_IP_POST_ROUTING target LOG level warning prefix "hello" index 100 ref 2 bind 0 Ensure we call tcf_idr_release(), in case 'tname' allocation failed, also when the action is being replaced. Fixes: 4e8ddd7f1758 ("net: sched: don't release reference on action overwrite") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24Linux 5.0-rc8v5.0-rc8Linus Torvalds
2019-02-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Bug fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: record maximum physical address width in kvm_mmu_extended_role kvm: x86: Return LA57 feature based on hardware capability x86/kvm/mmu: fix switch between root and guest MMUs s390: vsie: Use effective CRYCBD.31 to check CRYCBD validity
2019-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Hopefully the last pull request for this release. Fingers crossed: 1) Only refcount ESP stats on full sockets, from Martin Willi. 2) Missing barriers in AF_UNIX, from Al Viro. 3) RCU protection fixes in ipv6 route code, from Paolo Abeni. 4) Avoid false positives in untrusted GSO validation, from Willem de Bruijn. 5) Forwarded mesh packets in mac80211 need more tailroom allocated, from Felix Fietkau. 6) Use operstate consistently for linkup in team driver, from George Wilkie. 7) ThunderX bug fixes from Vadim Lomovtsev. Mostly races between VF and PF code paths. 8) Purge ipv6 exceptions during netdevice removal, from Paolo Abeni. 9) nfp eBPF code gen fixes from Jiong Wang. 10) bnxt_en firmware timeout fix from Michael Chan. 11) Use after free in udp/udpv6 error handlers, from Paolo Abeni. 12) Fix a race in x25_bind triggerable by syzbot, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) net: phy: realtek: Dummy IRQ calls for RTL8366RB tcp: repaired skbs must init their tso_segs net/x25: fix a race in x25_bind() net: dsa: Remove documentation for port_fdb_prepare Revert "bridge: do not add port to router list when receives query with source 0.0.0.0" selftests: fib_tests: sleep after changing carrier. again. net: set static variable an initial value in atl2_probe() net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10G bpf, doc: add bpf list as secondary entry to maintainers file udp: fix possible user after free in error handler udpv6: fix possible user after free in error handler fou6: fix proto error handler argument type udpv6: add the required annotation to mib type mdio_bus: Fix use-after-free on device_register fails net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 bnxt_en: Wait longer for the firmware message response to complete. bnxt_en: Fix typo in firmware message timeout logic. nfp: bpf: fix ALU32 high bits clearance bug nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K Documentation: networking: switchdev: Update port parent ID section ...
2019-02-23net: phy: realtek: Dummy IRQ calls for RTL8366RBLinus Walleij
This fixes a regression introduced by commit 0d2e778e38e0ddffab4bb2b0e9ed2ad5165c4bf7 "net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt". This assumes that a PHY cannot trigger interrupt unless it has .config_intr() or .ack_interrupt() implemented. A later patch makes the code assume both need to be implemented for interrupts to be present. But this PHY (which is inside a DSA) will happily fire interrupts without either callback. Implement dummy callbacks for .config_intr() and .ack_interrupt() in the phy header to fix this. Tested on the RTL8366RB on D-Link DIR-685. Fixes: 0d2e778e38e0 ("net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt") Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23tcp: repaired skbs must init their tso_segsEric Dumazet
syzbot reported a WARN_ON(!tcp_skb_pcount(skb)) in tcp_send_loss_probe() [1] This was caused by TCP_REPAIR sent skbs that inadvertenly were missing a call to tcp_init_tso_segs() [1] WARNING: CPU: 1 PID: 0 at net/ipv4/tcp_output.c:2534 tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc7+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x45 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] fixup_bug arch/x86/kernel/traps.c:173 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534 Code: 88 fc ff ff 4c 89 ef e8 ed 75 c8 fb e9 c8 fc ff ff e8 43 76 c8 fb e9 63 fd ff ff e8 d9 75 c8 fb e9 94 f9 ff ff e8 bf 03 91 fb <0f> 0b e9 7d fa ff ff e8 b3 03 91 fb 0f b6 1d 37 43 7a 03 31 ff 89 RSP: 0018:ffff8880ae907c60 EFLAGS: 00010206 RAX: ffff8880a989c340 RBX: 0000000000000000 RCX: ffffffff85dedbdb RDX: 0000000000000100 RSI: ffffffff85dee0b1 RDI: 0000000000000005 RBP: ffff8880ae907c90 R08: ffff8880a989c340 R09: ffffed10147d1ae1 R10: ffffed10147d1ae0 R11: ffff8880a3e8d703 R12: ffff888091b90040 R13: ffff8880a3e8d540 R14: 0000000000008000 R15: ffff888091b90860 tcp_write_timer_handler+0x5c0/0x8a0 net/ipv4/tcp_timer.c:583 tcp_write_timer+0x10e/0x1d0 net/ipv4/tcp_timer.c:607 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 arch/x86/include/asm/irqflags.h:58 Code: ff ff ff 48 89 c7 48 89 45 d8 e8 59 0c a1 fa 48 8b 45 d8 e9 ce fe ff ff 48 89 df e8 48 0c a1 fa eb 82 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffff8880a98afd78 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff1125061 RBX: ffff8880a989c340 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000001 RDI: ffff8880a989cbbc RBP: ffff8880a98afda8 R08: ffff8880a989c340 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff889282f8 R14: 0000000000000001 R15: 0000000000000000 arch_cpu_idle+0x10/0x20 arch/x86/kernel/process.c:555 default_idle_call+0x36/0x90 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x386/0x570 kernel/sched/idle.c:262 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:353 start_secondary+0x404/0x5c0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 79861919b889 ("tcp: fix TCP_REPAIR xmit queue setup") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net/x25: fix a race in x25_bind()Eric Dumazet
syzbot was able to trigger another soft lockup [1] I first thought it was the O(N^2) issue I mentioned in my prior fix (f657d22ee1f "net/x25: do not hold the cpu too long in x25_new_lci()"), but I eventually found that x25_bind() was not checking SOCK_ZAPPED state under socket lock protection. This means that multiple threads can end up calling x25_insert_socket() for the same socket, and corrupt x25_list [1] watchdog: BUG: soft lockup - CPU#0 stuck for 123s! [syz-executor.2:10492] Modules linked in: irq event stamp: 27515 hardirqs last enabled at (27514): [<ffffffff81006673>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (27515): [<ffffffff8100668f>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (32): [<ffffffff8632ee73>] x25_get_neigh+0xa3/0xd0 net/x25/x25_link.c:336 softirqs last disabled at (34): [<ffffffff86324bc3>] x25_find_socket+0x23/0x140 net/x25/af_x25.c:341 CPU: 0 PID: 10492 Comm: syz-executor.2 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__sanitizer_cov_trace_pc+0x4/0x50 kernel/kcov.c:97 Code: f4 ff ff ff e8 11 9f ea ff 48 c7 05 12 fb e5 08 00 00 00 00 e9 c8 e9 ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 <48> 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 38 0c 92 7e 81 e2 RSP: 0018:ffff88806e94fc48 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffff1100d84dac5 RBX: 0000000000000001 RCX: ffffc90006197000 RDX: 0000000000040000 RSI: ffffffff86324bf3 RDI: ffff88806c26d628 RBP: ffff88806e94fc48 R08: ffff88806c1c6500 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: ffff88806c26d628 R13: ffff888090455200 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f3a107e4700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3a107e3db8 CR3: 00000000a5544000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __x25_find_socket net/x25/af_x25.c:327 [inline] x25_find_socket+0x7d/0x140 net/x25/af_x25.c:342 x25_new_lci net/x25/af_x25.c:355 [inline] x25_connect+0x380/0xde0 net/x25/af_x25.c:784 __sys_connect+0x266/0x330 net/socket.c:1662 __do_sys_connect net/socket.c:1673 [inline] __se_sys_connect net/socket.c:1670 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1670 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f3a107e3c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e29 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000005 RBP: 000000000073c040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3a107e46d4 R13: 00000000004be362 R14: 00000000004ceb98 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 10493 Comm: syz-executor.3 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x143/0x290 kernel/locking/qrwlock.c:86 Code: 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 41 0f b6 55 00 <41> 38 d7 7c eb 84 d2 74 e7 48 89 df e8 cc aa 4e 00 eb dd be 04 00 RSP: 0018:ffff888085c47bd8 EFLAGS: 00000206 RAX: 0000000000000300 RBX: ffffffff89412b00 RCX: 1ffffffff1282560 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89412b00 RBP: ffff888085c47c70 R08: 1ffffffff1282560 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: 00000000000000ff R13: fffffbfff1282560 R14: 1ffff11010b88f7d R15: 0000000000000003 FS: 00007fdd04086700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd04064db8 CR3: 0000000090be0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:703 __sys_bind+0x23f/0x290 net/socket.c:1481 __do_sys_bind net/socket.c:1492 [inline] __se_sys_bind net/socket.c:1490 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Fixes: 90c27297a9bf ("X.25 remove bkl in bind") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: dsa: Remove documentation for port_fdb_prepareHauke Mehrtens
This callback was removed some time ago, also remove the documentation. Fixes: 1b6dd556c304 ("net: dsa: Remove prepare phase for FDB") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23Revert "bridge: do not add port to router list when receives query with ↵Hangbin Liu
source 0.0.0.0" This reverts commit 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") and commit 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries") The reason is RFC 4541 is not a standard but suggestive. Currently we will elect 0.0.0.0 as Querier if there is no ip address configured on bridge. If we do not add the port which recives query with source 0.0.0.0 to router list, the IGMP reports will not be about to forward to Querier, IGMP data will also not be able to forward to dest. As Nikolay suggested, revert this change first and add a boolopt api to disable none-zero election in future if needed. Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Reported-by: Sebastian Gottschall <s.gottschall@newmedia-net.de> Fixes: 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") Fixes: 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23selftests: fib_tests: sleep after changing carrier. again.Thadeu Lima de Souza Cascardo
Just like commit e2ba732a1681 ("selftests: fib_tests: sleep after changing carrier"), wait one second to allow linkwatch to propagate the carrier change to the stack. There are two sets of carrier tests. The first slept after the carrier was set to off, and when the second set ran, it was likely that the linkwatch would be able to run again without much delay, reducing the likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a loop, you will quickly notice the failures. Sleeping on the second set of tests make the failures go away. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: set static variable an initial value in atl2_probe()Mao Wenan
cards_found is a static variable, but when it enters atl2_probe(), cards_found is set to zero, the value is not consistent with last probe, so next behavior is not our expect. Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10GMaxime Chevallier
Some Marvell Alaska PHYs support 2.5G, 5G and 10G BaseT links. Their default behaviour is to advertise all of these modes, but at the moment, only 10GBaseT is supported. To prevent link partners from establishing link at that speed, clear these modes upon configuring aneg parameters. Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reported-by: Russell King <linux@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23Merge tag 'powerpc-5.0-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One fix for an oops when using SRIOV, introduced by the recent changes to support compound IOMMU groups. Thanks to Alexey Kardashevskiy" * tag 'powerpc-5.0-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv/sriov: Register IOMMU groups for VFs
2019-02-23Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four small fixes: three in drivers and one in the core. The core fix is also minor in scope since the bug it fixes is only known to affect systems using SCSI reservations. Of the driver bugs, the libsas one is the most major because it can lead to multiple disks on the same expander not being exposed" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: reset host byte in DID_NEXUS_FAILURE case scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attached scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
2019-02-23drm/i915/pmu: Always sample an active ringbufferChris Wilson
As we no longer have a precise indication of requests queued to an engine, make no presumptions and just sample the ring registers to see if the engine is busy. v2: Report busy while the ring is idling on a semaphore/event. v3: Give the struct a name! v4: Always 0 outside the powerwell; trusting the powerwell is accurate enough for our sampling pmu. v5: Protect against gen7 mmio madness and try to improve grammar Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190223000102.14290-1-chris@chris-wilson.co.uk
2019-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-02-23 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a bug in BPF's LPM deletion logic to match correct prefix length, from Alban. 2) Fix AF_XDP teardown by not destroying umem prematurely as it is still needed till all outstanding skbs are freed, from Björn. 3) Fix unkillable BPF_PROG_TEST_RUN under preempt kernel by checking signal_pending() outside need_resched() condition which is never triggered there, from Stanislav. 4) Fix two nfp JIT bugs, one in code emission for K-based xor, and another one to explicitly clear upper bits in alu32, from Jiong. 5) Add bpf list address to maintainers file, from Daniel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22Merge branch 'fixes-v5.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull keys fixes from James Morris: "Two fixes from Eric Biggers" * 'fixes-v5.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: always initialize keyring_index_key::desc_len KEYS: user: Align the payload buffer
2019-02-22Merge tag 'pm-5.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a regression in the PM-runtime framework introduced by the recent switch-over of it to using hrtimers and a use-after-free introduced by one of the recent changes in the scmi-cpufreq driver. Specifics: - Use hrtimer_try_to_cancel() instead of hrtimer_cancel() in the PM-runtime framework to avoid a possible timer-related deadlock introduced recently (Vincent Guittot). - Reorder the scmi-cpufreq driver code to avoid accessing memory that has just been freed (Yangtao Li)" * tag 'pm-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM-runtime: Fix deadlock when canceling hrtimer cpufreq: scmi: Fix use-after-free in scmi_cpufreq_exit()
2019-02-22Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Only a handful of device tree fixes, all simple enough: NVIDIA Tegra: - Fix a regression for booting on chromebooks TI OMAP: - Two fixes PHY mode on am335x reference boards Marvell mvebu: - A regression fix for Armada XP NAND flash controllers - An incorrect reset signal on the clearfog board" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: tegra: Restore DT ABI on Tegra124 Chromebooks ARM: dts: am335x-evm: Fix PHY mode for ethernet ARM: dts: am335x-evmsk: Fix PHY mode for ethernet arm64: dts: clearfog-gt-8k: fix SGMII PHY reset signal ARM: dts: armada-xp: fix Armada XP boards NAND description
2019-02-22Merge tag 'arc-5.0-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "Fixes for ARC for 5.0, bunch of those are stable fodder anyways so sooner the better. - Fix memcpy to prevent prefetchw beyond end of buffer [Eugeniy] - Enable unaligned access early to prevent exceptions given newer gcc code gen [Eugeniy] - Tighten up uboot arg checking to prevent false negatives and also allow both jtag and bootloading to coexist w/o config option as needed by kernelCi folks [Eugeniy] - Set slab alignment to 8 for ARC to avoid the atomic64_t unalign [Alexey] - Disable regfile auto save on interrupts on HSDK platform due to a silicon issue [Vineet] - Avoid HS38x boot printing crash by not reading HS48x only reg [Vineet]" * tag 'arc-5.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: don't assume core 0x54 has dual issue ARC: define ARCH_SLAB_MINALIGN = 8 ARC: enable uboot support unconditionally ARC: U-boot: check arguments paranoidly ARCv2: support manual regfile save on interrupts ARC: uacces: remove lp_start, lp_end from clobber list ARC: fix actionpoints configuration detection ARCv2: lib: memcpy: fix doing prefetchw outside of buffer ARCv2: Enable unaligned access in early ASM code
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 16:03:46 +0000