| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Ulf writes:
"MMC core:
- Fixup conversion of debounce time to/from ms/us
MMC host:
- sdhi: Fixup whitelisting for Gen3 types"
* tag 'mmc-v4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: slot-gpio: Fix debounce time to use miliseconds again
mmc: core: Fix debounce time to use microseconds
mmc: sdhi: sys_dmac: check for all Gen3 types when whitelisting
|
|
Thomas Falcon says:
====================
ibmvnic: Implement driver-defined queue limits
In this patch series, update the ibmvnic driver to use driver-defined
queue limits instead of limits imposed by the Virtual I/O server
management partition. For some deviced, initial max queue size and
amount limits, despite their definition, can actually be exceeded if
the client driver requests it. With this in mind, define a private
ethtool flag that toggles the use of driver-defined limits. These
limits are currently more than what supported hardware will likely
allow, so the driver will attempt to get as close as possible to
the user request but may not fully succeed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When choosing channel amounts and ring sizes, the maximums in the
ibmvnic driver are defined by the virtual i/o server management
partition. Even though they are defined as maximums, the client
driver may in fact successfully request resources that exceed
these limits, which are mostly dependent on a user's hardware
With this in mind, provide an ethtool flag that when enabled will
allow the user to request resources limited by driver-defined
maximums instead of limits defined by the management partition.
The driver will try to honor the user's request but may not allowed
by the management partition. In this case, the driver requests
as close as it can get to the desired amount until it succeeds.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce driver-defined maximums for queue ring sizes. Devices
available for IBM vNIC today will likely not allow this amount,
but this should give us some leeway for future devices that may
support larger ring sizes.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Increase queue size limit to 16. Devices available for IBM vNIC today
will not allow this amount, but this should give us some leeway for
future devices that may support more RX or TX queues.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some of the chip-specific hw_start functions set bit TXCFG_AUTO_FIFO
in register TxConfig. The original patch changed the order of some
calls resulting in these changes being overwritten by
rtl_set_tx_config_registers() in rtl_hw_start(). This eventually
resulted in network stalls especially under high load.
Analyzing the chip-specific hw_start functions all chip version from
34, with the exception of version 39, need this bit set.
This patch moves setting this bit to rtl_set_tx_config_registers().
Fixes: 4fd48c4ac0a0 ("r8169: move common initializations to tp->hw_start")
Reported-by: Ortwin Glück <odi@odi.ch>
Reported-by: David Arendt <admin@prnet.org>
Root-caused-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Tested-by: Tony Atkinson <tatkinson@linux.com>
Tested-by: David Arendt <admin@prnet.org>
Tested-by: Ortwin Glück <odi@odi.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
tun: address two syzbot reports
Small changes addressing races discovered by syzbot.
First patch is a cleanup.
Second patch moves a mutex init sooner.
Third patch makes sure each tfile gets its own napi enable flags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since tun->flags might be shared by multiple tfile structures,
it is better to make sure tun_get_user() is using the flags
for the current tfile.
Presence of the READ_ONCE() in tun_napi_frags_enabled() gave a hint
of what could happen, but we need something stronger to please
syzbot.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 13647 Comm: syz-executor5 Not tainted 4.19.0-rc5+ #59
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427
Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4
RSP: 0018:ffff8801c400f410 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325
RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0
RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000
R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358
R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004
FS: 00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
napi_gro_frags+0x3f4/0xc90 net/core/dev.c:5715
tun_get_user+0x31d5/0x42a0 drivers/net/tun.c:1922
tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1967
call_write_iter include/linux/fs.h:1808 [inline]
new_sync_write fs/read_write.c:474 [inline]
__vfs_write+0x6b8/0x9f0 fs/read_write.c:487
vfs_write+0x1fc/0x560 fs/read_write.c:549
ksys_write+0x101/0x260 fs/read_write.c:598
__do_sys_write fs/read_write.c:610 [inline]
__se_sys_write fs/read_write.c:607 [inline]
__x64_sys_write+0x73/0xb0 fs/read_write.c:607
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457579
Code: 1d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fe003614c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457579
RDX: 0000000000000012 RSI: 0000000020000000 RDI: 000000000000000a
RBP: 000000000072c040 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0036156d4
R13: 00000000004c5574 R14: 00000000004d8e98 R15: 00000000ffffffff
Modules linked in:
RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427
Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4
RSP: 0018:ffff8801c400f410 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325
RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0
RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000
R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358
R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004
FS: 00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is the first part to fix following syzbot report :
console output: https://syzkaller.appspot.com/x/log.txt?x=145378e6400000
kernel config: https://syzkaller.appspot.com/x/.config?x=443816db871edd66
dashboard link: https://syzkaller.appspot.com/bug?extid=e662df0ac1d753b57e80
Following patch is fixing the race condition, but it seems safer
to initialize this mutex at tfile creation anyway.
Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+e662df0ac1d753b57e80@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tun_napi_disable() and tun_napi_del() do not need
a pointer to the tun_struct
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bonding driver lacks the rcu lock when it calls down into
netdev_lower_get_next_private_rcu from bond_poll_controller, which
results in a trace like:
WARNING: CPU: 2 PID: 179 at net/core/dev.c:6567 netdev_lower_get_next_private_rcu+0x34/0x40
CPU: 2 PID: 179 Comm: kworker/u16:15 Not tainted 4.19.0-rc5-backup+ #1
Workqueue: bond0 bond_mii_monitor
RIP: 0010:netdev_lower_get_next_private_rcu+0x34/0x40
Code: 48 89 fb e8 fe 29 63 ff 85 c0 74 1e 48 8b 45 00 48 81 c3 c0 00 00 00 48 8b 00 48 39 d8 74 0f 48 89 45 00 48 8b 40 f8 5b 5d c3 <0f> 0b eb de 31 c0 eb f5 0f 1f 40 00 0f 1f 44 00 00 48 8>
RSP: 0018:ffffc9000087fa68 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff880429614560 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 00000000ffffffff RDI: ffffffffa184ada0
RBP: ffffc9000087fa80 R08: 0000000000000001 R09: 0000000000000000
R10: ffffc9000087f9f0 R11: ffff880429798040 R12: ffff8804289d5980
R13: ffffffffa1511f60 R14: 00000000000000c8 R15: 00000000ffffffff
FS: 0000000000000000(0000) GS:ffff88042f880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4b78fce180 CR3: 000000018180f006 CR4: 00000000001606e0
Call Trace:
bond_poll_controller+0x52/0x170
netpoll_poll_dev+0x79/0x290
netpoll_send_skb_on_dev+0x158/0x2c0
netpoll_send_udp+0x2d5/0x430
write_ext_msg+0x1e0/0x210
console_unlock+0x3c4/0x630
vprintk_emit+0xfa/0x2f0
printk+0x52/0x6e
? __netdev_printk+0x12b/0x220
netdev_info+0x64/0x80
? bond_3ad_set_carrier+0xe9/0x180
bond_select_active_slave+0x1fc/0x310
bond_mii_monitor+0x709/0x9b0
process_one_work+0x221/0x5e0
worker_thread+0x4f/0x3b0
kthread+0x100/0x140
? process_one_work+0x5e0/0x5e0
? kthread_delayed_work_timer_fn+0x90/0x90
ret_from_fork+0x24/0x30
We're also doing rcu dereferences a layer up in netpoll_send_skb_on_dev
before we call down into netpoll_poll_dev, so just take the lock there.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Link dumps can return results from a target namespace. If the namespace id
is invalid, then the dump request should fail if get_target_net fails
rather than continuing with a dump of the current namespace.
Fixes: 79e1ad148c844 ("rtnetlink: use netnsid to query interface")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 90c7afc96cbbd77f44094b5b651261968e97de67.
When the commit was merged, the code used nf_ct_put() to free
the entry, but later on commit 76644232e612 ("openvswitch: Free
tmpl with tmpl_free.") replaced that with nf_ct_tmpl_free which
is a more appropriate. Now the original problem is removed.
Then 44d6e2f27328 ("net: Replace NF_CT_ASSERT() with WARN_ON().")
replaced a debug assert with a WARN_ON() which is trigged now.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the recent TCP/EDT patch series, I switched TCP and sch_fq
clocks from MONOTONIC to TAI, in order to meet the choice done
earlier for sch_etf packet scheduler.
But sure enough, this broke some setups were the TAI clock
jumps forward (by almost 50 year...), as reported
by Leonard Crestez.
If we want to converge later, we'll probably need to add
an skb field to differentiate the clock bases, or a socket option.
In the meantime, an UDP application will need to use CLOCK_MONOTONIC
base for its SCM_TXTIME timestamps if using fq packet scheduler.
Fixes: 72b0094f9182 ("tcp: switch tcp_clock_ns() to CLOCK_TAI base")
Fixes: 142537e41923 ("net_sched: sch_fq: switch to CLOCK_TAI")
Fixes: fd2bca2aa789 ("tcp: switch internal pacing timer to CLOCK_TAI")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TLS test cases splice_from_pipe, send_and_splice &
recv_peek_multiple_records expect to receive a given nummber of bytes
and then compare them against the number of bytes which were sent.
Therefore, system call recv() must not return before receiving the
requested number of bytes, otherwise the subsequent memcmp() fails.
This patch passes MSG_WAITALL flag to recv() so that it does not return
prematurely before requested number of bytes are copied to receive
buffer.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The RSC feature -- a bit field "internal" was added here with total
size unchanged:
struct rndis_per_packet_info {
u32 size;
u32 type:31;
u32 internal:1;
u32 ppi_offset;
};
On TX path, we put rndis msg into skb head room, which is not zeroed
before passing to us. We do not use the "internal" field in TX path,
but it may impact older hosts which use the entire 32 bits as "type".
To fix the bug, this patch sets the field "internal" to zero.
Fixes: c8e4eff4675f ("hv_netvsc: Add support for LRO/RSC in the vSwitch")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using mod_delayed_work() allows to simplify handling delayed work and
removes the need for the sync parameter in phy_trigger_machine().
Also introduce a helper phy_queue_state_machine() to encapsulate the
low-level delayed work calls. No functional change intended.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Florian Fainelli says:
====================
net: systemport: Turn on offloads by default
Up until now, we had added all the code necessary to turn on RX/TX
checksum offloads at runtime, but there is no reason why they have to be
disabled by default given that this gives a slight performance
improvement.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When inserting the TSB, keep track of how many times we had to do it and
if there was a failure in doing so, this helps profile the driver for
possibly incorrect headroom settings.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During bcm_sysport_insert_tsb() make sure we differentiate a SKB
headroom re-allocation failure from the normal swap and replace path.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can turn on the RX/TX checksum offloads by default and make sure that
those are properly reflected back to e.g: stacked devices such as VLAN
or DSA.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During driver resume and open, the HW may have lost its context/state,
utilize bcm_sysport_set_features() to make sure we do restore the
correct set of features that were previously configured.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for unconditionally enabling TX and RX checksum offloads,
refactor bcm_sysport_set_features() a bit such that
__netdev_update_features() during register_netdev() can make sure that
features are correctly programmed during network device registration.
Since we can now be called during register_netdev() with clocks gated,
we need to temporarily turn them on/off in order to have a successful
register programming.
We also move the CRC forward setting read into
bcm_sysport_set_features() since priv->crc_fwd matters while turning on
RX checksum offload, that way we are guaranteed they are in sync in case
we ever add support for NETIF_F_RXFCS at some point in the future.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When tcf_block_find() fails, it already rollbacks the qdisc refcnt,
so its caller doesn't need to clean up this again. Avoid calling
qdisc_put() again by resetting qdisc to NULL for callers.
Reported-by: syzbot+37b8770e6d5a8220a039@syzkaller.appspotmail.com
Fixes: e368fdb61d8e ("net: sched: use Qdisc rcu API instead of relying on rtnl lock")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Johannes Berg says:
====================
netlink: extended attribute validation
This adds further netlink attribute validation:
* min/max/range validation
* validation through a custom function pointer
This is useful to
* reduce boilerplate code in command handling code, if attributes
are used commonly across different commands
* get more extended ACK error messages/attribute pointers
* ensure attributes are valid even when ignored
(though this might be a problem when converting existing code)
Changes since v1:
* split off validate_type from type and use that for min/max/range
and function; this is better because the range is limited to the
range of s16 and so things like "u16 with minimum value 1" couldn't
be expressed earlier
* add macros for this, e.g. NLA_POLICY_MIN(NLA_U16, 1) for the case
mentioned in the previous bullet
Using this pretty much in all places where applicable in nl80211
reduces the code size there by about 1.8KiB, with just a minimal
code increase in lib/nlattr.o.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the ability to have an arbitrary validation function attached
to a netlink policy that doesn't already use the validation_data
pointer in another way.
This can be useful to validate for example the content of a binary
attribute, like in nl80211 the "(information) elements", which must
be valid streams of "u8 type, u8 length, u8 value[length]".
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Without further bloating the policy structs, we can overload
the `validation_data' pointer with a struct of s16 min, max
and use those to validate ranges in NLA_{U,S}{8,16,32,64}
attributes.
It may sound strange to validate NLA_U32 with a s16 max, but
in many cases NLA_U32 is used for enums etc. since there's no
size benefit in using a smaller attribute width anyway, due
to netlink attribute alignment; in cases like that it's still
useful, particularly when the attribute really transports an
enum value.
Doing so lets us remove quite a bit of validation code, if we
can be sure that these attributes aren't used by userspace in
places where they're ignored today.
To achieve all this, split the 'type' field and introduce a
new 'validation_type' field which indicates what further
validation (beyond the validation prescribed by the type of
the attribute) is done. This currently allows for no further
validation (the default), as well as min, max and range checks.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'Support-of-Flow-Director-in-HNS3-Ethernet-Driver-for-HiP08-Rev2-SoC'
Salil Mehta says:
====================
Support of Flow Director in HNS3 Ethernet Driver for HiP08 Rev2 SoC
This patch-set adds the support of FD(Flow Director) in the HNS3 PF driver
for HiP08 Rev2(0x21) SoC of Hisilicon. FD can be used in filtering the flows
and deciding to drop the flow or forward it to paricular queue.
Configuration consists of rules with input keys and actions. The rules are
stored in TCAM.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds switch for flow director with ethtool command
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes all flow director rules when unload hns3 driver.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When doing reset, remove all entries in TCAM block, and keep flow
director rules list. After finishing reset, restore all entries.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for querying rule number and rule details
by ethtool commands.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for add and delete rule by ethtool commands.
HNS3 driver supports several flow types, include ETHER_FLOW,
IP_USER_FLOW, TCP_V4_FLOW, UDP_V4_FLOW, SCTP_V4_FLOW, IPV6_USER_FLOW,
TCP_V6_FLOW, UDP_V6_FLOW and SCTP_V6_FLOW.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Each flow director rule consists of input key and action. The input key
is the condition for matching, includes tuples of L2/L3/L4 header.
Action is the behaviour when a packet matches with the input key, such
as drop the packet, or forward to a specified queue.
The input key is stored in the tcam blocks, Each bit of input key can
be masked.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Flow director is a new feature supported by hardware with revision 0x21.
This patch adds flow direcor initialization for each PF. It queries flow
director mode and tcam resource from firmware, selects tuples used for
input key.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrew Lunn says:
====================
Continue towards using linkmode in phylib
These patches contain some further cleanup and helpers, and the first
real patch towards using linkmode bitmaps in phylink.
The macro magic in the RFC version has been replaced with run time
initialisation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is one step in allowing phylib to make use of link_mode bitmaps,
instead of u32 for supported and advertised features. Convert the phy
drivers to use bitmaps to indicates the features they support.
Build bitmap equivalents of the u32 values at runtime, and have the
drivers point to the appropriate bitmap. These bitmaps are shared, and
we don't want a driver to modify them. So mark them __ro_after_init.
Within phylib, the features bitmap is currently turned back into a
u32. This will be removed once the whole of phylib, and the drivers
are converted to use bitmaps.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The macro PHY_GBIT_FEAUTRES needs to change into a bitmap in order to
support link_modes. Remove its use from xgde by replacing it with its
definition.
Probably, the current behavior is wrong. It probably should be
ANDing not assigning.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add helpers which take a linkmode rather than a u32 ethtool for
advertising settings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a helper to convert the local advertising to an LCL capabilities,
which is then used to resolve pause flow control settings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The phy_mii_ioctl can be used to write a value into the MII_ADVERTISE
register in the PHY. Since this changes the state of the PHY, we need
to make the same change to phydev->advertising. Add a helper which can
convert the register value to a linkmode.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add phydev_info() and make use of it within the phy drivers and core
code.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Not all new style LINK_MODE bits can be converted into old style
SUPPORTED bits. We need to warn when such a conversion is attempted.
Add a helper for this.
Convert all pr_warn() calls to phydev_warn() where possible.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
phylink has some useful helpers to working with linkmode bitmaps.
Move them to there own header so other code can use them.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reserve two TLV types for feature development, and warn in the driver
if they ever leak into production.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Address compiler warning reported by kbuild autobuilders
when building for i386 as a result of dma_addr_t size on
different architectures.
warning: cast to pointer from integer of different size
[-Wint-to-pointer-cast]
Fixes: 7e8d5755be0e ("net: nixge: Add support for 64-bit platforms")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Johan Hedberg says:
====================
pull request: bluetooth 2018-09-27
Here's one more Bluetooth fix for 4.19, fixing the handling of an
attempt to unpair a device while pairing is in progress.
Let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When SKBs are coalesced, we can have SKBs with different
frag sizes. Some with PAGE_SIZE and some not with PAGE_SIZE.
Since recv_skip_hint is always set to the full SKB size,
it can overestimate the amount that should be read using
normal read for coalesced packets.
Change the recv_skip_hint so that it only includes the first
frags that are not of PAGE_SIZE.
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we have less than PAGE_SIZE of data on receive queue,
we set recv_skip_hint to 0. Instead, set it to the actual
number of bytes available.
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
