summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-10rt2x00: rt2800lib: no need to toggle RF R30 bit 7 twiceKevin Lo
In rt2800_config_channel_rf3xxx(), there's no need to toggle RF R30 bit 7 twice. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10net: p54spi: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10rt2x00: do not pause queue on flushStanislaw Gruszka
Pausing queue on flush make no sense since txdone procedure un-pause queue. Before flush procedure we have to assure queue is stopped, i.e. on receive path h/w RX is disabled, on transmit path queue is disabled in mac80211. That conditions are true except one function: rt2x00usb_watchdog_tx_dma(), so add stop/start queue there. Note stop/start queue can be racy if we do this from multiple paths, but currently we stop TX queues only on rt2x00lib_disable_radio(), which also stop/sync watchdog, hance we have no race condition. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10rt2x00: rt2800lib: fix default VGC values for RT3572 for the 5GHz bandGabor Juhos
The rt2x00 driver uses 0x22 as a default VGC value in VGC adjustment for the RT3572 chipset. In the Ralink DPO_RT5572_LinuxSTA_2.6.1.3_20121022 driver, this value is only used for initialization. During VGC adjustment, the reference driver uses different values. Update the 'rt2800_get_default_vgc' function to synchronize the values with the reference driver. Also add the missing AGC initialization code into the 'rt2800_config_channel' function. References: RT35xx_SetAGCInitValue in chip/rt35xx.c RT35xx_ChipAGCAdjust in chip/rt35xx.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10rt2x00: rt2800lib: fix VGC programming for RT3572 and RT3593Gabor Juhos
According to the DPO_RT5572_LinuxSTA_2.6.1.3_20121022 reference driver, programming of the 'BBP 66' register on the RT3572 and RT3593 chipsets must be done via the 'rt2800_bbp_write_with_rx_chain' function. This ensures that value is correclty set for all RX chains. References: RT35xx_ChipAGCAdjust and RT35xx_SetAGCInitValue functions in chips/rt35xx.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10rt2x00: rt2800lib: fix default VGC values for RT3593Gabor Juhos
Update the rt2800_get_default_vgc function to use the same VGC values that the DPO_RT5572_LinuxSTA_2.6.1.3_20121022 reference driver uses. References: RT35xx_ChipAGCAdjust in chips/rt35xx.c RT3593_R66_MID_LOW_SENS_GET macro in include/chip/rt3593.h RT3593_R66_NON_MID_LOW_SEMS_GET macro in include/chips/rt3593.h Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10rt2x00: rt2800lib: remove TXPOWER_DELTA entry from extended EEPROM mapGabor Juhos
The TXPOWER_DELTA field of the regular EEPROM stores the TX power compensation value for HT40. The extended EEPROM has no such field, it stores separate TX power values for HT20 and for HT40. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10rt2x00: rt2800lib: remove TXMIXER_GAIN entries from the extended EEPROM mapGabor Juhos
The comments are indicating that the TXMIXER_GAIN_BG and TXMIXED_GAIN_A entries are overlapping with the RSSI_BG2 and RSSI_A2 entries in the extended EEPROM map. This is not correct, because the upper byte of the RSSI_BG2 and RSSI_A2 entries are reserved. There are no TX mixer gain values are stored at all in the extended EEPROM. Remove the initialization of these entries from the extended EEPROM map to reflect this. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10brcmsmac: add support for a BCM4313 with PCI id 0x4313Hauke Mehrtens
There are some BCM4313 out there with a PCI id of 0x4313. These devices are missing a sprom and are only used on routers or other embedded devices. We found one connected to a BCM63XX SoC. This devices was found by someone in this ticket: https://dev.openwrt.org/ticket/13551 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10bcma: add PCI id 0x4313Hauke Mehrtens
This PCI id is used by some BCM4313 cards without a sprom. I have seen such a card on a router connected to some BCM63XX SoC via PCIe. There are cards out there with the same PCI id and a BCM4311, which is a pre ieee80211n chip only supporting ieee80211a, these are still not supported by b43 and not detected by ssb. This devices was found by someone in this ticket: https://dev.openwrt.org/ticket/13551 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10bcma: reject PCI cards in bcma.Hauke Mehrtens
bcma currently only supports PCIe cards and no PCI cards, reject them if we find them. I have never heard of any PCI card using the AI bus (bcma), all of them are using ssb instead. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10net: wireless: wl1251: update firmware pathFelipe Balbi
TI firmwares are located under ti-connectivity directory. Update path to make sure driver can find and load firmware blob. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10rt2x00_pci: Fix interrupt handler name (visible at /proc/interrupts)Kirill Tkhai
Currently driver name is wrong. PCI device address is visible at /proc/interrupts instead of the name: 43: 124 0 0 0 PCI-MSI-edge rtsx_pci 44: 384 0 0 0 PCI-MSI-edge snd_hda_intel 45: 25096 0 0 0 PCI-MSI-edge 0000:01:00.0 ^^^^^^^^^^^^ So, pass the right name. rt2x00_ops->name contains KBUILD_MODNAME and good for that, so pass it. Handler names will be "rt2500pci", "rt2500pci" etc. Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> CC: Ivo van Doorn <IvDoorn@gmail.com> CC: Gertjan van Wingerde <gwingerde@gmail.com> CC: Helmut Schaa <helmut.schaa@googlemail.com> CC: linux-wireless@vger.kernel.org Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardwareEugene Krasnikov
This is a mac80211 driver for Qualcomm WCN3660/WCN3680 devices. So far WCN3660/WCN3680 is available only on MSM platform. Firmware can be found here: https://www.codeaurora.org/cgit/external/hisense/platform/vendor/qcom-opensource/wlan/prima/tree/firmware_bin?h=8130_CS Wiki page is available here: http://wireless.kernel.org/en/users/Drivers/wcn36xx A lot people made a contribution to this driver. Here is the list in alphabetical order: Eugene Krasnikov <k.eugene.e@gmail.com> Kalle Valo <kvalo@qca.qualcomm.com> Olof Johansson <dev@skyshaper.net> Pontus Fuchs <pontus.fuchs@gmail.com> Yanbo Li <yanbol@qti.qualcomm.com> Signed-off-by: Eugene Krasnikov <k.eugene.e@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10mwifiex: Change variable type to boolPeter Senna Tschudin
The variables cancel_scan_cmd, enable_data, hs_activate and valid are only assigned the values true and false. Change its type to bool. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @exists@ type T; identifier b; @@ - T + bool b = ...; ... when any b = \(true\|false\) Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-10-10Bluetooth: Fix checking for HCI_SETUP flag when receiving mgmt commandsJohan Hedberg
When the HCI_SETUP flag is set the controller has not yet been announced over mgmt and therefore doesn't exist from that perspective. If we nevertheless get a mgmt command for it we should respond with the appropriate INVALID_INDEX error. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-10Bluetooth: Fix potential double-frees of L2CAP skbsJohan Hedberg
The l2cap_recv_frame function is expected to take ownership and eventually free the skb passed to it. We need to ensure that the conn->rx_skb pointer is no longer reachable when calling l2cap_recv_frame so that no other function, such as l2cap_conn_del, may think that it can free conn->rx_skb. An actual situation when this can happen is when smp_sig_channel (called from l2cap_recv_frame) fails and l2cap_conn_del gets called as a consequence. The l2cap_conn_del function would then try to free conn->rx_skb, but as the same skb was just passed to smp_sig_channel and freed we get a double-free. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-10Bluetooth: Restrict high speed support to SSP enabled controllersMarcel Holtmann
The support for Bluetooth High Speed can only be enabled on controllers where also Secure Simple Pairing has been enabled. Trying to enable high speed when SSP is disabled will result into an error. Disabling SSP will at the same time disable high speed as well. It is required to enforce this dependency on SSP since high speed support is only defined for authenticated, unauthenticated and debug link keys. These link key types require SSP. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-10Bluetooth: Remove unneeded val variable when setting SSPMarcel Holtmann
The variable val in the set_ssp() function of the management interface is not needed. Just use cp->val directly since its input values have already been validated. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-10Bluetooth: Refactor hci_connect_leAndre Guedes
This patch does some code refactoring in hci_connect_le() by moving the exception code into if statements and letting the main flow in first level of function scope. It also adds extra comments to improve the code readability. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-10Bluetooth: Use HCI request for LE connectionAndre Guedes
This patch introduces a new helper, which uses the HCI request framework, for creating LE connectons. All the handling is now done by this function so we can remove the hci_cs_le_create_conn() event handler. This patch also removes the old hci_le_create_connection() since it is not used anymore. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-09ath10k: remove unneded semicolon from ath10k_core_fetch_firmware_api_n()Fengguang Wu
drivers/net/wireless/ath/ath10k/core.c:507:2-3: Unneeded semicolon Removes unneeded semicolon. Generated by: coccinelle/misc/semicolon.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-09ath10k: fix ath10k_debug_start() lockingKalle Valo
ath10k_debug_start() was not called with conf_mutex, fix that. Also there was a deadlock in ath10k_debug_stop(), rename it to ath10k_debug_destroy() and call it only when the device is destroyed. Reported-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-08ath10k: Fix bug in max. VHT A-MPDU sizeSujith Manoharan
For VHT peers, the maximum A-MPDU size has to be calculated from the VHT capabilities element and not the HT-cap. The formula is the same, but a higher value is used in VHT, allowing larger aggregates to be transmitted. The patch contains a workaround for some Netgear/Linksys APs that report Rx A-MPDU factor incorrectly. Tested-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-08Bluetooth: Fix changing advertising setting while LE is connectedJohan Hedberg
We only (re)enable advertising when LE is disconnected. Trying to enable advertising using mgmt_set_advertising while connected should simply change the flag but not do anything else (until the connection gets dropped). This patch fixes this by making an LE connection lookup to determine whether there are any connected devices or not. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-08ath10k: fix RX performance when using AP 10.X FWMichal Kazior
Due to oversight AP 10.X support was merged with Ethernet RX decap mode. Only Native Wifi RX decap mode guarantees IP header is properly aligned and avoids sk_buff data realignment (which is very expensive performance-wise) in mac80211. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-08ath10k: fix possible memory leak in new FW loadingMichal Kazior
Some failpaths did `return` instead of a `goto` leaking requested firmware. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-08ath10k: fix printf format stringMichal Kazior
size_t corresponds to %zu not %d. Compiler was complaining about it. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-07Bluetooth: Fix variable shadow warningsJohannes Berg
Sparse points out three places where variables are shadowed, rename two of the variables and remove the duplicate third. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-07Bluetooth: Read flow control mode on AMP controller initMarcel Holtmann
When initializing an AMP controller, read its current flow control mode so that the correct value is used. The AMP controller defaults to block based flow control and this extra command is just to double check. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-07Bluetooth: Read location data on AMP controller initMarcel Holtmann
When initializing an AMP controller, read its current known location data so that it can be analyzed later on. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-07Bluetooth: Read supported features and commands on AMP controllersMarcel Holtmann
The commands for reading supported features and commands are both supported by AMP controllers. Issue them during controller init phase so their values are known. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-07ath10k: remove num_sends_allowedMichal Kazior
The value provided by num_sends_allowed is now derived from CE source ringbuffer state. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-07ath10k: remove ce_sendlist_sendMichal Kazior
It is completely pointless to keep this function around. It doesn't do anything different than ce_send except it introduces more overhead. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-07ath10k: split vdev_id calculation from tx functionMichal Kazior
Tidy up ath10k_tx(). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-07ath10k: split tid calculation from tx functionMichal Kazior
Tidy up ath10k_tx(). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-07ath10k: extend the max_scan timeBartosz Markowski
It was observed few times, the artificial max_scan limit we are using mainly to detect FW hangs, can be not enough for instance while being associated and during heavy traffic. What we do if the FW won't return with scan results within the max_time time is a scan abort. This is especially visible with 10.X fw which in combination with dual band HW (scanning 32 channels) can end up with hw_scan close to 10 seconds. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-07ath10k: enable 10.x firmware branch supportBartosz Markowski
Since the WMI API has been added and we can detect from the FW IEs what firmware variant we deal with, turn on support for 10.x firmware branch in ath10k_wmi_attach(). kvalo: improve the commit log Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-07NFC: Fix SE API related sparse warningSamuel Ortiz
se_io_cb can be declared static. This fixes the following sparse warning: net/nfc/netlink.c:1287:6: warning: symbol 'se_io_cb' was not declared. Should it be static? Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-10-07NFC: port100: Add target mode supportThierry Escande
This implements the target NFC digital operations tg_configure_hw(), tg_listen(), tg_listen_mdaa(), and tg_send_cmd(). The target mode supports NFC-A technology at 106kbits/s and NFC-F technologies at 212 and 424kbits/s. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Cc: Stephen Tiedemann <stephen.tiedemann@gmail.com> Tested-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-10-07NFC: port100: Add initiator mode supportThierry Escande
This patch implements the initiator NFC operations in_configure_hw() and in_send_cmd(). It also implements the switch_rf() operation. The initiator mode supports NFC-A technology at 106kbits/s and NFC-F technologies at 212 and 424kbits/s. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Cc: Stephen Tiedemann <stephen.tiedemann@gmail.com> Tested-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-10-07NFC: port100: Commands mechanism implementationThierry Escande
This patch implements the command handling mechanism. The digital stack serializes all commands sent to the driver. This means that the digital stack waits for the reply of the current command before sending a new one. So there is no command queue managed at driver level. All Port-100 commands are asynchronous. If the command has been sent successfully to the device, it replies with an ACK frame. Then the command response is received (or actually no-response in case of timeout or error) and a command complete work on the system workqueue is responsible for sending the response (or the error) back to the digital stack. The digital stack requires some commands to be synchronous, mainly hardware configuration ones. These commands use the asynchronous command path but are made synchronous by using a completion object. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Cc: Stephen Tiedemann <stephen.tiedemann@gmail.com> Tested-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-10-07NFC: Sony Port-100 Series driverThierry Escande
This adds support for the Sony NFC USB dongle RC-S380, based on the Port-100 chip. This dongle is an analog frontend and does not implement the digital layer. This driver uses the nfc_digital module which is an implementation of the NFC Digital Protocol stack. This patch is a skeleton. It only registers the dongle against the NFC digital protocol stack. All NFC digital operation functions are stubbed out. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Cc: Stephen Tiedemann <stephen.tiedemann@gmail.com> Tested-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-10-07Bluetooth: List powered down AMP controllers correctlyMarcel Holtmann
Within the AMP discover response, list powered down AMP controllers as powered down. No point in trying to make them look any different. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-07Bluetooth: Make mgmt power down notification for BR/EDR explicitMarcel Holtmann
The management interface only operates on BR/EDR controllers. The check for the power down notification is a bit intermixed with the check if controller auto power off is active. Since there are more than just BR/EDR controllers supported, make this check explicit since the auto power off check also applies to AMP controllers and it has to happen in this exact order. Otherwise the bit will not be cleared. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-07Bluetooth: Power off AMP controllers after setup phaseMarcel Holtmann
Even AMP controllers should be powered off after the setup phase. It is not a good idea to keep AMP controllers powered on all the time if they are not in use. Power on of the AMP controller can either be done manually via command line commands or directly via A2MP. Especially since there is an indication in A2MP for powered down controllers that can be activated. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-07Bluetooth: Make mgmt_discovering() return voidMarcel Holtmann
The return value of mgmt_discovering() function is not used and so just change it to return void. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-07Bluetooth: Make mgmt_remote_name() return voidMarcel Holtmann
The return value of mgmt_remote_name() function is not used and so just change it to return void. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-07Bluetooth: Make mgmt_device_found() return voidMarcel Holtmann
The return value of mgmt_device_found() function is not used and so just change it to return void. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 19:56:20 +0000