| Age | Commit message (Collapse) | Author |
|---|
|
general protection fault, probably for non-canonical address
0xdffffc0000000022: 0000 [#1] KASAN: null-ptr-deref
in range [0x0000000000000110-0x0000000000000117]
RIP: 0010:io_ring_set_wakeup_flag fs/io_uring.c:6929 [inline]
RIP: 0010:io_disable_sqo_submit+0xdb/0x130 fs/io_uring.c:8891
Call Trace:
io_uring_create fs/io_uring.c:9711 [inline]
io_uring_setup+0x12b1/0x38e0 fs/io_uring.c:9739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
io_disable_sqo_submit() might be called before user rings were
allocated, don't do io_ring_set_wakeup_flag() in those cases.
Reported-by: syzbot+ab412638aeb652ded540@syzkaller.appspotmail.com
Fixes: d9d05217cb69 ("io_uring: stop SQPOLL submit on creator's death")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Only the IPI-related functions in the smp_ops should be conditional
on the vector callback being available. The rest should still happen:
• xen_hvm_smp_prepare_boot_cpu()
This function does two things, both of which should still happen if
there is no vector callback support.
The call to xen_vcpu_setup() for vCPU0 should still happen as it just
sets up the vcpu_info for CPU0. That does happen for the secondary
vCPUs too, from xen_cpu_up_prepare_hvm().
The second thing it does is call xen_init_spinlocks(), which perhaps
counter-intuitively should *also* still be happening in the case
without vector callbacks, so that it can clear its local xen_pvspin
flag and disable the virt_spin_lock_key accordingly.
Checking xen_have_vector_callback in xen_init_spinlocks() itself
would affect PV guests, so set the global nopvspin flag in
xen_hvm_smp_init() instead, when vector callbacks aren't available.
• xen_hvm_smp_prepare_cpus()
This does some IPI-related setup by calling xen_smp_intr_init() and
xen_init_lock_cpu(), which can be made conditional. And it sets the
xen_vcpu_id to XEN_VCPU_ID_INVALID for all possible CPUS, which does
need to happen.
• xen_smp_cpus_done()
This offlines any vCPUs which doesn't fit in the global shared_info
page, if separate vcpu_info placement isn't available. That part also
needs to happen regardless of vector callback support.
• xen_hvm_cpu_die()
This doesn't actually do anything other than commin_cpu_die() right
right now in the !vector_callback case; all three teardown functions
it calls should be no-ops. But to guard against future regressions
it's useful to call it anyway, and for it to explicitly check for
xen_have_vector_callback before calling those additional functions.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210106153958.584169-6-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In the case where xen_have_vector_callback is false, we still register
the IPI vectors in xen_smp_intr_init() for the secondary CPUs even
though they aren't going to be used. Stop doing that.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210106153958.584169-5-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
It's useful to be able to test non-vector event channel delivery, to make
sure Linux will work properly on older Xen which doesn't have it.
It's also useful for those working on Xen and Xen-compatible hypervisors,
because there are guest kernels still in active use which use PCI INTX
even when vector delivery is available.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210106153958.584169-4-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
With INTX or GSI delivery, Xen uses the event channel structures of CPU0.
If the interrupt gets handled by Linux on a different CPU, then no events
are seen as pending. Rather than introducing locking to allow other CPUs
to process CPU0's events, just ensure that the PCI interrupts happens
only on CPU0.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210106153958.584169-3-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
For a while, event channel notification via the PCI platform device
has been broken, because we attempt to communicate with xenstore before
we even have notifications working, with the xs_reset_watches() call
in xs_init().
We tend to get away with this on Xen versions below 4.0 because we avoid
calling xs_reset_watches() anyway, because xenstore might not cope with
reading a non-existent key. And newer Xen *does* have the vector
callback support, so we rarely fall back to INTX/GSI delivery.
To fix it, clean up a bit of the mess of xs_init() and xenbus_probe()
startup. Call xs_init() directly from xenbus_init() only in the !XS_HVM
case, deferring it to be called from xenbus_probe() in the XS_HVM case
instead.
Then fix up the invocation of xenbus_probe() to happen either from its
device_initcall if the callback is available early enough, or when the
callback is finally set up. This means that the hack of calling
xenbus_probe() from a workqueue after the first interrupt, or directly
from the PCI platform device setup, is no longer needed.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210113132606.422794-2-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
With UBSAN enabled and building with clang, there are occasionally
warnings like
WARNING: modpost: vmlinux.o(.text+0xc533ec): Section mismatch in reference from the function arch_atomic64_or() to the variable .init.data:numa_nodes_parsed
The function arch_atomic64_or() references
the variable __initdata numa_nodes_parsed.
This is often because arch_atomic64_or lacks a __initdata
annotation or the annotation of numa_nodes_parsed is wrong.
for functions that end up not being inlined as intended but operating
on __initdata variables. Mark these as __always_inline, along with
the corresponding asm-generic wrappers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210108092024.4034860-1-arnd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
S_FRAME_SIZE is the size of the pt_regs structure, no longer the size of
the kernel stack frame, the name is misleading. In keeping with arm32,
rename S_FRAME_SIZE to PT_REGS_SIZE.
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210112015813.2340969-1-Jianlin.Lv@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This reverts commit 367c820ef08082e68df8a3bc12e62393af21e4b5.
lockup_detector_init() makes heavy use of per-cpu variables and must be
called with preemption disabled. Usually, it's handled early during boot
in kernel_init_freeable(), before SMP has been initialised.
Since we do not know whether or not our PMU interrupt can be signalled
as an NMI until considerably later in the boot process, the Arm PMU
driver attempts to re-initialise the lockup detector off the back of a
device_initcall(). Unfortunately, this is called from preemptible
context and results in the following splat:
| BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
| caller is debug_smp_processor_id+0x20/0x2c
| CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.10.0+ #276
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0x0/0x3c0
| show_stack+0x20/0x6c
| dump_stack+0x2f0/0x42c
| check_preemption_disabled+0x1cc/0x1dc
| debug_smp_processor_id+0x20/0x2c
| hardlockup_detector_event_create+0x34/0x18c
| hardlockup_detector_perf_init+0x2c/0x134
| watchdog_nmi_probe+0x18/0x24
| lockup_detector_init+0x44/0xa8
| armv8_pmu_driver_init+0x54/0x78
| do_one_initcall+0x184/0x43c
| kernel_init_freeable+0x368/0x380
| kernel_init+0x1c/0x1cc
| ret_from_fork+0x10/0x30
Rather than bodge this with raw_smp_processor_id() or randomly disabling
preemption, simply revert the culprit for now until we figure out how to
do this properly.
Reported-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20201221162249.3119-1-lecopzer.chen@mediatek.com
Link: https://lore.kernel.org/r/20210112221855.10666-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
All EL0 returns go via ret_to_user(), which masks IRQs and notifies
lockdep and tracing before calling into do_notify_resume(). Therefore,
there's no need for do_notify_resume() to call trace_hardirqs_off(), and
the comment is stale. The call is simply redundant.
In ret_to_user() we call exit_to_user_mode(), which notifies lockdep and
tracing the IRQs will be enabled in userspace, so there's no need for
el0_svc_common() to call trace_hardirqs_on() before returning. Further,
at the start of ret_to_user() we call trace_hardirqs_off(), so not only
is this redundant, but it is immediately undone.
In addition to being redundant, the trace_hardirqs_on() in
el0_svc_common() leaves lockdep inconsistent with the hardware state,
and is liable to cause issues for any C code or instrumentation
between this and the call to trace_hardirqs_off() which undoes it in
ret_to_user().
This patch removes the redundant tracing calls and associated stale
comments.
Fixes: 23529049c684 ("arm64: entry: fix non-NMI user<->kernel transitions")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107145310.44616-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Allow issuing an IOCTL_PRIVCMD_MMAP_RESOURCE ioctl with num = 0 and
addr = 0 in order to fetch the size of a specific resource.
Add a shortcut to the default map resource path, since fetching the
size requires no address to be passed in, and thus no VMA to setup.
This is missing from the initial implementation, and causes issues
when mapping resources that don't have fixed or known sizes.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: stable@vger.kernel.org # >= 4.18
Link: https://lore.kernel.org/r/20210112115358.23346-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The type of 'r' in octeon_irq_init_ciu is 'unsigned int', so 'r < 0'
can't be true.
Fix this by change the type of 'r' and 'i' from 'unsigned int'
to 'int'. As 'i' won't be negative, this change works.
Fixes: 99fbc70f8547 ("MIPS: Octeon: irq: Alloc desc before configuring IRQ")
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
LLVM-built Linux triggered a boot hangup with KASLR enabled.
arch/mips/kernel/relocate.c:get_random_boot() uses linux_banner,
which is a string constant, as a random seed, but accesses it
as an array of unsigned long (in rotate_xor()).
When the address of linux_banner is not aligned to sizeof(long),
such access emits unaligned access exception and hangs the kernel.
Use PTR_ALIGN() to align input address to sizeof(long) and also
align down the input length to prevent possible access-beyond-end.
Fixes: 405bc8fd12f5 ("MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLE")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The patch fix commit: ad5d112 ("riscv: use vDSO common flow to
reduce the latency of the time-related functions").
The GENERIC_TIME_VSYSCALL should be CONFIG_GENERIC_TIME_VSYSCALL
or vgettimeofday won't work.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Fixes: ad5d1122b82f ("riscv: use vDSO common flow to reduce the latency of the time-related functions")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Use raw_smp_processor_id instead of smp_processor_id() to fix warning,
BUG: using smp_processor_id() in preemptible [00000000] code: init/1
caller is debug_smp_processor_id+0x1c/0x26
CPU: 0 PID: 1 Comm: init Not tainted 5.10.0-rc4 #211
Call Trace:
walk_stackframe+0x0/0xaa
show_stack+0x32/0x3e
dump_stack+0x76/0x90
check_preemption_disabled+0xaa/0xac
debug_smp_processor_id+0x1c/0x26
get_cache_size+0x18/0x68
load_elf_binary+0x868/0xece
bprm_execve+0x224/0x498
kernel_execve+0xdc/0x142
run_init_process+0x90/0x9e
try_to_run_init_process+0x12/0x3c
kernel_init+0xb4/0xf8
ret_from_exception+0x0/0xc
The issue is found when CONFIG_DEBUG_PREEMPT enabled.
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[Palmer: Added a comment.]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Pass conntrack -f to specify family in netfilter conntrack helper
selftests, from Chen Yi.
2) Honor hashsize modparam from nf_conntrack_buckets sysctl,
from Jesper D. Brouer.
3) Fix memleak in nf_nat_init() error path, from Dinghao Liu.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nf_nat: Fix memleak in nf_nat_init
netfilter: conntrack: fix reading nf_conntrack_buckets
selftests: netfilter: Pass family parameter "-f" to conntrack tool
====================
Link: https://lore.kernel.org/r/20210112222033.9732-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Karsten Graul says:
====================
net/smc: fix out of bound access in netlink interface
Both patches fix possible out-of-bounds reads. The original code expected
that snprintf() reads len-1 bytes from source and appends the terminating
null, but actually snprintf() first copies len bytes and finally overwrites
the last byte with a null.
Fix this by using memcpy() and terminating the string afterwards.
====================
Link: https://lore.kernel.org/r/20210112162122.26832-1-kgraul@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using snprintf() to convert not null-terminated strings to null
terminated strings may cause out of bounds read in the source string.
Therefore use memcpy() and terminate the target string with a null
afterwards.
Fixes: a3db10efcc4c ("net/smc: Add support for obtaining SMCR device list")
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
smc_clc_get_hostname() sets the host pointer to a buffer
which is not NULL-terminated (see smc_clc_init()).
Reported-by: syzbot+f4708c391121cfc58396@syzkaller.appspotmail.com
Fixes: 099b990bd11a ("net/smc: Add support for obtaining system information")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We should call irq trace only if interrupt is going to be enabled during
excecption handling. Otherwise, it results in following warning during
boot with lock debugging enabled.
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] DEBUG_LOCKS_WARN_ON(early_boot_irqs_disabled)
[ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:4085 lockdep_hardirqs_on_prepare+0x22a/0x22e
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0-00022-ge20097fb37e2-dirty #548
[ 0.000000] epc: c005d5d4 ra : c005d5d4 sp : c1c01e80
[ 0.000000] gp : c1d456e0 tp : c1c0a980 t0 : 00000000
[ 0.000000] t1 : ffffffff t2 : 00000000 s0 : c1c01ea0
[ 0.000000] s1 : c100f360 a0 : 0000002d a1 : c00666ee
[ 0.000000] a2 : 00000000 a3 : 00000000 a4 : 00000000
[ 0.000000] a5 : 00000000 a6 : c1c6b390 a7 : 3ffff00e
[ 0.000000] s2 : c2384fe8 s3 : 00000000 s4 : 00000001
[ 0.000000] s5 : c1c0a980 s6 : c1d48000 s7 : c1613b4c
[ 0.000000] s8 : 00000fff s9 : 80000200 s10: c1613b40
[ 0.000000] s11: 00000000 t3 : 00000000 t4 : 00000000
[ 0.000000] t5 : 00000001 t6 : 00000000
Fixes: 3c4697982982 ("riscv:Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT")
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Paolo Abeni says:
====================
mptcp: a couple of fixes
This series includes two related fixes addressing potential divide by 0
bugs in the MPTCP datapath.
====================
Link: https://lore.kernel.org/r/cover.1610471474.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of re-implementing most of inet_shutdown, re-use
such helper, and implement the MPTCP-specific bits at the
'proto' level.
The msk-level disconnect() can now be invoked, lets provide a
suitable implementation.
As a side effect, this fixes bad state management for listener
sockets. The latter could lead to division by 0 oops since
commit ea4ca586b16f ("mptcp: refine MPTCP-level ack scheduling").
Fixes: 43b54c6ee382 ("mptcp: Use full MPTCP-level disconnect state machine")
Fixes: ea4ca586b16f ("mptcp: refine MPTCP-level ack scheduling")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller found a way to trigger division by zero
in mptcp_subflow_cleanup_rbuf().
The current checks implemented into tcp_can_send_ack()
are too week, let's be more accurate.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Fixes: ea4ca586b16f ("mptcp: refine MPTCP-level ack scheduling")
Fixes: fd8976790a6c ("mptcp: be careful on MPTCP-level ack.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes.
This series has 2 fixes. The first one fixes a resource accounting error
with the RDMA driver loaded and the second one fixes the firmware
flashing sequence after defragmentation.
====================
Link: https://lore.kernel.org/r/1610357200-30755-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the FW tells the driver to retry the INSTALL_UPDATE command after
it has cleared the NVM area, the driver is not clearing the previously
used ALLOWED_TO_DEFRAG flag. As a result the FW tries to defrag the NVM
area a second time in a loop and can fail the request.
Fixes: 1432c3f6a6ca ("bnxt_en: Retry installing FW package under NO_SPACE error condition.")
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function bnxt_get_ulp_stat_ctxs() does not count the stats contexts
used by the RDMA driver correctly when the RDMA driver is freeing the
MSIX vectors. It assumes that if the RDMA driver is registered, the
additional stats contexts will be needed. This is not true when the
RDMA driver is about to unregister and frees the MSIX vectors.
This slight error leads to over accouting of the stats contexts needed
after the RDMA driver has unloaded. This will cause some firmware
warning and error messages in dmesg during subsequent config. changes
or ifdown/ifup.
Fix it by properly accouting for extra stats contexts only if the
RDMA driver is registered and MSIX vectors have been successfully
requested.
Fixes: c027c6b4e91f ("bnxt_en: get rid of num_stat_ctxs variable")
Reviewed-by: Yongping Zhang <yongping.zhang@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit enables the use of the r8153_ecm driver, introduced with
commit c1aedf015ebdd0 ("net/usb/r8153_ecm: support ECM mode for
RTL8153") for the Lenovo Powered USB-C Hub (17ef:721e) based on the
Realtek RTL8153B chip.
This results in the following driver preference:
- if r8152 is available, use the r8152 driver
- if r8152 is not available, use the r8153_ecm driver
This is done to prevent the NIC from constantly sending pause frames
when the host system enters standby (fixed by using the r8152 driver
in "r8152: Add Lenovo Powered USB-C Travel Hub"), while still allowing
the device to work with the r8153_ecm driver as a fallback.
Signed-off-by: Leon Schuermann <leon@is.currently.online>
Tested-by: Leon Schuermann <leon@is.currently.online>
Link: https://lore.kernel.org/r/20210111190312.12589-3-leon@is.currently.online
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip used to
use the cdc_ether driver. However, using this driver, with the system
suspended the device constantly sends pause-frames as soon as the
receive buffer fills up. This causes issues with other devices, where
some Ethernet switches stop forwarding packets altogether.
Using the Realtek driver (r8152) fixes this issue. Pause frames are no
longer sent while the host system is suspended.
Signed-off-by: Leon Schuermann <leon@is.currently.online>
Tested-by: Leon Schuermann <leon@is.currently.online>
Link: https://lore.kernel.org/r/20210111190312.12589-2-leon@is.currently.online
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Florian reported a use-after-free bug in devlink_nl_port_fill found with
KASAN:
(devlink_nl_port_fill)
(devlink_port_notify)
(devlink_port_unregister)
(dsa_switch_teardown.part.3)
(dsa_tree_teardown_switches)
(dsa_unregister_switch)
(bcm_sf2_sw_remove)
(platform_remove)
(device_release_driver_internal)
(device_links_unbind_consumers)
(device_release_driver_internal)
(device_driver_detach)
(unbind_store)
Allocated by task 31:
alloc_netdev_mqs+0x5c/0x50c
dsa_slave_create+0x110/0x9c8
dsa_register_switch+0xdb0/0x13a4
b53_switch_register+0x47c/0x6dc
bcm_sf2_sw_probe+0xaa4/0xc98
platform_probe+0x90/0xf4
really_probe+0x184/0x728
driver_probe_device+0xa4/0x278
__device_attach_driver+0xe8/0x148
bus_for_each_drv+0x108/0x158
Freed by task 249:
free_netdev+0x170/0x194
dsa_slave_destroy+0xac/0xb0
dsa_port_teardown.part.2+0xa0/0xb4
dsa_tree_teardown_switches+0x50/0xc4
dsa_unregister_switch+0x124/0x250
bcm_sf2_sw_remove+0x98/0x13c
platform_remove+0x44/0x5c
device_release_driver_internal+0x150/0x254
device_links_unbind_consumers+0xf8/0x12c
device_release_driver_internal+0x84/0x254
device_driver_detach+0x30/0x34
unbind_store+0x90/0x134
What happens is that devlink_port_unregister emits a netlink
DEVLINK_CMD_PORT_DEL message which associates the devlink port that is
getting unregistered with the ifindex of its corresponding net_device.
Only trouble is, the net_device has already been unregistered.
It looks like we can stub out the search for a corresponding net_device
if we clear the devlink_port's type. This looks like a bit of a hack,
but also seems to be the reason why the devlink_port_type_clear function
exists in the first place.
Fixes: 3122433eb533 ("net: dsa: Register devlink ports before calling DSA driver setup()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian fainelli <f.fainelli@gmail.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210112004831.3778323-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the following happens when a DSA master driver unbinds while
there are DSA switches attached to it:
$ echo 0000:00:00.5 > /sys/bus/pci/drivers/mscc_felix/unbind
------------[ cut here ]------------
WARNING: CPU: 0 PID: 392 at net/core/dev.c:9507
Call trace:
rollback_registered_many+0x5fc/0x688
unregister_netdevice_queue+0x98/0x120
dsa_slave_destroy+0x4c/0x88
dsa_port_teardown.part.16+0x78/0xb0
dsa_tree_teardown_switches+0x58/0xc0
dsa_unregister_switch+0x104/0x1b8
felix_pci_remove+0x24/0x48
pci_device_remove+0x48/0xf0
device_release_driver_internal+0x118/0x1e8
device_driver_detach+0x28/0x38
unbind_store+0xd0/0x100
Located at the above location is this WARN_ON:
/* Notifier chain MUST detach us all upper devices. */
WARN_ON(netdev_has_any_upper_dev(dev));
Other stacked interfaces, like VLAN, do indeed listen for
NETDEV_UNREGISTER on the real_dev and also unregister themselves at that
time, which is clearly the behavior that rollback_registered_many
expects. But DSA interfaces are not VLAN. They have backing hardware
(platform devices, PCI devices, MDIO, SPI etc) which have a life cycle
of their own and we can't just trigger an unregister from the DSA
framework when we receive a netdev notifier that the master unregisters.
Luckily, there is something we can do, and that is to inform the driver
core that we have a runtime dependency to the DSA master interface's
device, and create a device link where that is the supplier and we are
the consumer. Having this device link will make the DSA switch unbind
before the DSA master unbinds, which is enough to avoid the WARN_ON from
rollback_registered_many.
Note that even before the blamed commit, DSA did nothing intelligent
when the master interface got unregistered either. See the discussion
here:
https://lore.kernel.org/netdev/20200505210253.20311-1-f.fainelli@gmail.com/
But this time, at least the WARN_ON is loud enough that the
upper_dev_link commit can be blamed.
The advantage with this approach vs dev_hold(master) in the attached
link is that the latter is not meant for long term reference counting.
With dev_hold, the only thing that will happen is that when the user
attempts an unbind of the DSA master, netdev_wait_allrefs will keep
waiting and waiting, due to DSA keeping the refcount forever. DSA would
not access freed memory corresponding to the master interface, but the
unbind would still result in a freeze. Whereas with device links,
graceful teardown is ensured. It even works with cascaded DSA trees.
$ echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind
[ 1818.797546] device swp0 left promiscuous mode
[ 1819.301112] sja1105 spi2.0: Link is Down
[ 1819.307981] DSA: tree 1 torn down
[ 1819.312408] device eno2 left promiscuous mode
[ 1819.656803] mscc_felix 0000:00:00.5: Link is Down
[ 1819.667194] DSA: tree 0 torn down
[ 1819.711557] fsl_enetc 0000:00:00.2 eno2: Link is Down
This approach allows us to keep the DSA framework absolutely unchanged,
and the driver core will just know to unbind us first when the master
goes away - as opposed to the large (and probably impossible) rework
required if attempting to listen for NETDEV_UNREGISTER.
As per the documentation at Documentation/driver-api/device_link.rst,
specifying the DL_FLAG_AUTOREMOVE_CONSUMER flag causes the device link
to be automatically purged when the consumer fails to probe or later
unbinds. So we don't need to keep the consumer_link variable in struct
dsa_switch.
Fixes: 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210111230943.3701806-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in
support") added the phy clk support. The commit already checks if
clk_get_optional() throw an error but instead of returning the error it
ignores it.
Fixes: bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210111085932.28680-1-m.felsch@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the build error:
mm/process_vm_access.c:277:5: error: implicit declaration of function 'in_compat_syscall'; did you mean 'in_ia32_syscall'? [-Werror=implicit-function-declaration]
Fixes: 38dc5079da7081e "Fix compat regression in process_vm_rw()"
Reported-by: syzbot+5b0d0de84d6c65b8dd2b@syzkaller.appspotmail.com
Cc: Kyle Huey <me@kylehuey.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Format %pG expects a lower case 'p' in order to print the flags.
Fix it.
Link: https://lkml.kernel.org/r/20210108085202.4506-1-osalvador@suse.de
Fixes: 8295d535e2aa ("mm,hwpoison: refactor get_any_page")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I would like to help with slab allocators maintenance, from the
perspective of being responsible for SLAB and more recently also SLUB in
an enterprise distro kernel and supporting its users. Recently I've
been focusing on improving SLUB's debugging features, and patch review
in the area, including the kmemcg accounting rewrite last year.
Link: https://lkml.kernel.org/r/20210108110353.19971-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The huge page size is encoded for VM_FAULT_HWPOISON errors only. So if
we return VM_FAULT_HWPOISON, huge page size would just be ignored.
Link: https://lkml.kernel.org/r/20210107123449.38481-1-linmiaohe@huawei.com
Fixes: aa50d3a7aa81 ("Encode huge page size for VM_FAULT_HWPOISON errors")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After commit 236c32eb1096 ("mm: migrate: clean up migrate_prep{_local}")',
do_migrate_pages can return uninitialized variable 'err' (which is
propagated to user-space as error) when 'from' and 'to' nodesets are
identical. This can be reproduced with LTP migrate_pages01, which calls
migrate_pages() with same set for both old/new_nodes.
Add 'err' initialization back.
Link: https://lkml.kernel.org/r/456a021c7ef3636d7668cec9dcb4a446a4244812.1609855564.git.jstancek@redhat.com
Fixes: 236c32eb1096 ("mm: migrate: clean up migrate_prep{_local}")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In VM_MAP_PUT_PAGES case, we should put pages and free array in vfree.
But we missed to set area->nr_pages in vmap(). So we would fail to put
pages in __vunmap() because area->nr_pages = 0.
Link: https://lkml.kernel.org/r/20210107123541.39206-1-linmiaohe@huawei.com
Fixes: b944afc9d64d ("mm: add a VM_MAP_PUT_PAGES flag for vmap")
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The size of kasan_early_shadow_pte[] now is PTRS_PER_PTE which defined
to 512 for arm. This means that it only covers the prev Linux pte
entries, but not the HWTABLE pte entries for arm.
The reason it currently works is that the symbol kasan_early_shadow_page
immediately following kasan_early_shadow_pte in memory is page aligned,
which makes kasan_early_shadow_pte look like a 4KB size array. But we
can't ensure the order is always right with different compiler/linker,
or if more bss symbols are introduced.
We had a test with QEMU + vexpress：put a 512KB-size symbol with
attribute __section(".bss..page_aligned") after kasan_early_shadow_pte,
and poisoned it after kasan_early_init(). Then enabled CONFIG_KASAN, it
failed to boot up.
Link: https://lkml.kernel.org/r/20210109044622.8312-1-hailongliiu@yeah.net
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Signed-off-by: Ziliang Guo <guo.ziliang@zte.com.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Boot a CONFIG_MEMCG=y kernel with "cgroup_disabled=memory" and you are
met by a series of warnings from the VM_WARN_ON_ONCE_PAGE(!memcg, page)
recently added to the inline mem_cgroup_page_lruvec().
An earlier attempt to place that warning, in mem_cgroup_lruvec(), had
been careful to do so after weeding out the mem_cgroup_disabled() case;
but was itself invalid because of the mem_cgroup_lruvec(NULL, pgdat) in
clear_pgdat_congested() and age_active_anon().
Warning in mem_cgroup_page_lruvec() was once useful in detecting a KSM
charge bug, so may be worth keeping: but skip if mem_cgroup_disabled().
Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2101032056260.1093@eggly.anvils
Fixes: 9a1ac2288cf1 ("mm/memcontrol:rewrite mem_cgroup_page_lruvec()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hui Su <sh_def@163.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The trace point *trace_mm_page_alloc_zone_locked()* in __rmqueue() does
not currently cover all branches. Add the missing tracepoint and check
the page before do that.
[akpm@linux-foundation.org: use IS_ENABLED() to suppress warning]
Link: https://lkml.kernel.org/r/20201228132901.41523-1-carver4lio@163.com
Signed-off-by: Hailong liu <liu.hailong6@zte.com.cn>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
acquire_slab() fails if there is contention on the freelist of the page
(probably because some other CPU is concurrently freeing an object from
the page). In that case, it might make sense to look for a different page
(since there might be more remote frees to the page from other CPUs, and
we don't want contention on struct page).
However, the current code accidentally stops looking at the partial list
completely in that case. Especially on kernels without CONFIG_NUMA set,
this means that get_partial() fails and new_slab_objects() falls back to
new_slab(), allocating new pages. This could lead to an unnecessary
increase in memory fragmentation.
Link: https://lkml.kernel.org/r/20201228130853.1871516-1-jannh@google.com
Fixes: 7ced37197196 ("slub: Acquire_slab() avoid loop")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In commit 826f328e2b7e ("net: dcb: Validate netlink message in DCB
handler"), Linux started rejecting RTM_GETDCB netlink messages if they
contained a set-like DCB_CMD_ command.
The reason was that privileges were only verified for RTM_SETDCB messages,
but the value that determined the action to be taken is the command, not
the message type. And validation of message type against the DCB command
was the obvious missing piece.
Unfortunately it turns out that mlnx_qos, a somewhat widely deployed tool
for configuration of DCB, accesses the DCB set-like APIs through
RTM_GETDCB.
Therefore do not bounce the discrepancy between message type and command.
Instead, in addition to validating privileges based on the actual message
type, validate them also based on the expected message type. This closes
the loophole of allowing DCB configuration on non-admin accounts, while
maintaining backward compatibility.
Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver")
Fixes: 826f328e2b7e ("net: dcb: Validate netlink message in DCB handler")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/a3edcfda0825f2aa2591801c5232f2bbf2d8a554.1610384801.git.me@pmachata.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Advance the maximum number of arguments from 9 to 15 to account for
all potential feature flags that may be supplied.
Linux 4.19 added "meta_device"
(356d9d52e1221ba0c9f10b8b38652f78a5298329) and "recalculate"
(a3fcf7253139609bf9ff901fbf955fba047e75dd) flags.
Commit 468dfca38b1a6fbdccd195d875599cb7c8875cd9 added
"sectors_per_bit" and "bitmap_flush_interval".
Commit 84597a44a9d86ac949900441cea7da0af0f2f473 added
"allow_discards".
And the commit d537858ac8aaf4311b51240893add2fc62003b97 added
"fix_padding".
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Sometimes, when dm-crypt executes decryption in a tasklet, we may get
"BUG: KASAN: use-after-free in tasklet_action_common.constprop..."
with a kasan-enabled kernel.
When the decryption fully completes in the tasklet, dm-crypt will call
bio_endio(), which in turn will call clone_endio() from dm.c core code. That
function frees the resources associated with the bio, including per bio private
structures. For dm-crypt it will free the current struct dm_crypt_io, which
contains our tasklet object, causing use-after-free, when the tasklet is being
dequeued by the kernel.
To avoid this, do not call bio_endio() from the current tasklet context, but
delay its execution to the dm-crypt IO workqueue.
Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues")
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
With the introduction of a dynamic ZONE_DMA range based on DT or IORT
information, there's no need for CMA allocations from the wider
ZONE_DMA32 since on most platforms ZONE_DMA will cover the 32-bit
addressable range. Remove the arm64_dma32_phys_limit and set
arm64_dma_phys_limit to cover the smallest DMA range required on the
platform. CMA allocation and crashkernel reservation now go in the
dynamically sized ZONE_DMA, allowing correct functionality on RPi4.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Zhou <chenzhou10@huawei.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> # On RPi4B
|
|
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
- Fix parsing of link-local IPv6 addresses
- Fix confusing logging of mount errors that was introduced by the
fsopen() patchset.
- Fix a tracing use after free in _nfs4_do_setlk()
- Layout return-on-close fixes when called from nfs4_evict_inode()
- Layout segments were being leaked in
pnfs_generic_clear_request_commit()
- Don't leak DS commits in pnfs_generic_retry_commit()
- Fix an Oopsable use-after-free when nfs_delegation_find_inode_server()
calls iput() on an inode after the super block has gone away"
* tag 'nfs-for-5.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: nfs_igrab_and_active must first reference the superblock
NFS: nfs_delegation_find_inode_server must first reference the superblock
NFS/pNFS: Fix a leak of the layout 'plh_outstanding' counter
NFS/pNFS: Don't leak DS commits in pnfs_generic_retry_commit()
NFS/pNFS: Don't call pnfs_free_bucket_lseg() before removing the request
pNFS: Stricter ordering of layoutget and layoutreturn
pNFS: Clean up pnfs_layoutreturn_free_lsegs()
pNFS: We want return-on-close to complete when evicting the inode
pNFS: Mark layout for return if return-on-close was not sent
net: sunrpc: interpret the return value of kstrtou32 correctly
NFS: Adjust fs_context error logging
NFS4: Fix use-after-free in trace_event_raw_event_nfs4_set_lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi
Pull SCSI target fix from Martin Petersen:
"This addresses an issue in the SCSI target subsystem. A connected
initiator could specify IDs for any configured backing store device,
not just the ones explicitly made visible to the host.
The remedy is to honor the access control list when doing ID
descriptor lookups"
* tag 'mkp-scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi:
scsi: target: Fix XCOPY NAA identifier lookup
|
|
The clear-residuals mitigation is a relatively heavy hammer and under some
circumstances the user may wish to forgo the context isolation in order
to meet some performance requirement. Introduce a generic module
parameter to allow selectively enabling/disabling different mitigations.
To disable just the clear-residuals mitigation (on Ivybridge, Baytrail,
or Haswell) use the module parameter: i915.mitigations=auto,!residuals
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1858
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v5.7
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-3-chris@chris-wilson.co.uk
(cherry picked from commit f7452c7cbd5b5dfb9a6c84cb20bea04c89be50cd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The mitigation is required for all gen7 platforms, now that it does not
cause GPU hangs, restore it for Ivybridge and Baytrail.
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Bloomfield Jon <jon.bloomfield@intel.com>
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-2-chris@chris-wilson.co.uk
(cherry picked from commit 008ead6ef8f588a8c832adfe9db201d9be5fd410)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
MEDIA_STATE_VFE only accepts the 'maximum number of threads' in the
range [0, n-1] where n is #EU * (#threads/EU) with the number of threads
based on plaform and the number of EU based on the number of slices and
subslices. This is a fixed number per platform/gt, so appropriately
limit the number of threads we spawn to match the device.
v2: Oversaturate the system with tasks to force execution on every HW
thread; if the thread idles it is returned to the pool and may be reused
again before an unused thread.
v3: Fix more state commands, which was causing Baytrail to barf.
v4: STATE_CACHE_INVALIDATE requires a stall on Ivybridge
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2024
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Randy Wright <rwright@hpe.com>
Cc: stable@vger.kernel.org # v5.7+
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-1-chris@chris-wilson.co.uk
(cherry picked from commit eebfb32e26851662d24ea86dd381fd0f83cd4b47)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
